Street Lights solutions 2021
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Street Lights solutions 2021 Designing your lighting solutions
Street Lights
Atlas Street light Aquila Street light
p. 04 p. 16
Park Lights
Mira Park Light Traditional Park Light Pegasus Park Light
p. 30 p. 34 p. 40
Aurora Park Light Venus Park Light Halo Park Light
p. 42 p. 48 p. 50
Overview Detail 4 5
Certificates
Advantages
Applications
Characteristics
6 7
Housing Clip-on design
Installation
8 9
SL-AT01-026M 10-26W 24 1600-4160lm MOSO X6 026M052 4 466*215*120mm
SL-AT01-026M 15-45W 40 2400-7200lm MOSO X6 042M049 4 466*215*120mm
SL-AT01-060M 15-45W 48 2400-7200lm MOSO X6 042M049 5 466*278*120mm Light Distribution Diagram
SL-AT01-060M 30-60W 56 4800-9600lm MOSO X6 060M050 5 466*278*120mm
SL-AT01-080M 40-80W 72 6400-12800lm MOSO X6 075M062 5.7 526*278*120mm
Type 1S Type 1M Type 1L
SL-AT01-080M 40-80W 84 6800-13600lm MOSO X6 075M062 5.7 526*278*120mm
SL-AT01-080M 50-110W 84 8000-16000lm MOSO X6 105M062 5.7 526*278*120mm -/+180 -/+180 -/+180
-150 150 -150 150 -150 150
SL-AT01-120M 60-110W 108 9600-17600lm MOSO X6 105M062 6.5 618*278*120mm
-120 120 -120 120 -120 120
SL-AT01-120M 80-160W 108 12800-25600lm MOSO X6 150M062 6.5 618*278*120mm
SL-AT01-120M 80-160W 126 13600-27200lm MOSO X6 150M062 6.5 618*278*120mm -90 90 -90 90 -90 90
SL-AT01-200M 150-210W 168 24000-33600lm MOSO X6 200M062 8.4 736*278*120mm
-60 60 -60 60 -60 60
SL-AT01-200M 200-250W 168 32000-40000lm MOSO X6 240M062 8.4 736*278*120mm
-30 30 -30 30 -30 30
0 0 0
Type 2S Type 2M Type 2L
-/+180 -/+180 -/+180
-150 150 -150 150 -150 150
-120 120 -120 120 -120 120
-90 90 -90 90 -90 90
-60 60 -60 60 -60 60
-30 30 -30 30 -30 30
0 0 0
Type 3S Type 3M
-/+180 -/+180
-150 150 -150 150
-120 120 -120 120
-90 90 -90 90
-60 60 -60 60
-30 30 -30 30
0 0
12
14
Pole Selection
13160Lm/W
SYMBOLS KEY INGRESS PROTECTION RATING
Rating Example
0-10V 1-10V DAL I Triac
IP 6 5
Non-Dimmable 0-10V Dimmable 1-10V Dimmable DALI Dimmable TRIAC Dimmable Ingress protection Against Solids Against Liquids
Product Product Product Product Product
The first number identifies the ingress protection rating against solids
Certification mark that indicates conformity with health, safety, and environmental protection standards for
1. for solid bodies with dimensions > 50mm
products sold within the European Economic Area (EEA)
2. for solid bodies with dimensions > 12.5mm
3. for solid bodies with dimensions > 2.5mm
The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one of
4. for solid bodies with dimensions > 1mm
these marks, it means UL found that representative product samples met UL’s requirements
5. Dust protected
6. Dust tight
ENEC (European Norms Electrical Certification) is a certification scheme under CENELEC, accepted through-
out Europe. The ENEC Mark for electrical products demonstrates compliance with European safety standards.
The second number identifies the ingress protection rating against liquids
1. for vertically falling drops
CB Scheme is an international system for mutual acceptance of test reports and certificates dealing with the 2. for vertically falling drops when enclosure is tilted up to 15˚ vertically
safety of electrical and electronic components, equipment and products. 3. for water sprayed at an angle up to 60˚ vertically
4. for water splashed in any direction
TÜV certification marks show that manufacturer’s products have met applicable safety requirements and 5. for water projected in jets against the enclosure from any direction
quality standards. 6. for water projected in powerful jets against the enclosure from any direction
7. for enclosure’s temporary immersion at 1 meter in the water, under defined conditions
8. for enclosure’s continuous immersion in the water, under more severe conditions to those of number 7.
The UL Mark is the single most accepted Certification Mark in the United States. If a product carries one of
these marks, it means UL found that representative product samples met UL’s requirements.
The cULus is a combination mark that indicates compliance with both the U.S. requirements and those of
CAN/CSA 22.1-12, which is the Canadian Electrical Code issued by the Canadian Standards Association.
IMPACT PROTECTION RATING
Rating Example
INMETRO, the Brazilian accreditation body, is responsible for the accreditation of each product Certification
Body (CB). In addition, INMETRO defines the products and the respective requirements within this certifica- IK 05
tion scheme. Products manufactured in or exported to Brazil need a CB-issued certificate, stating that the
Impact protection Mechanical Impact level
product or family meets the Brazilian requirements.
The number identifies the impact protection rating
The DesignLights Consortium® is a collaboration of utility companies and regional energy efficiency organi-
00. No protection
zations. The certification is issued for commercial LED lights based on their color rendering capabilities, light
distribution and output, lumen maintenance, longevity or the ability to withstand stress, and the duration of
01-05. for tiny impact of < 1 Joule
the warranty period. 06. for impact of 1 Joule
07. for impact of 2 Joule
08. for impact of 5 Joule
The FCC Declaration of Conformity or the FCC mark is a certification mark employed on electronic products
09. for impact of 10 Joule
manufactured or sold in the United States which certifies that the electromagnetic interference from the
device is under limits approved by the Federal Communications Commission. 10. for impact of 20 Joule
The C-Tick mark is intended for use on products that comply with EMC standards. The label indicates that the
product complies with the applicable EMC standard and establishes a traceable link between a product and
the supplier responsible for placing it on the Australian or New Zealand market.Mira Park Series Mounting options
Method A: Cable suspended
Advantages Color Options
Multiple mounting options: Cable suspended, side
entry and post top installation.
Method B: Side entry
Smooth surface housing with UV stabilized
polyeaster powder paint finish for durability and
corrosion resistance.
Silver Grey
Weather-tight design and 3G Vibration rating
ensure durability even in harsh environments.
High intensity die-cast aluminum body with impact
grade that reaches IK08
Expertly engineered individual lenses made of optical
grade polycarbonate for maximum light intensity, with
tempered glass cover to protect
the optics.
Delivers improved visual comfort by lower glare
and providing a wider, smoother and more
uniform light.
Method C: Post topMira Park Series Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
Ø460mm 80mm
Installation pipe diameter: Ø60mm
Specifications Features & Certificates Product Parameter
Driver Brand Meanwell ELG/Philips Xi
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
LED Chip Philips Lumileds 5yrs IP65 IK08
Warranty
843681 25W
Operating Temperature -40°C ~ +50°C
843684 50W 3000K/4000K/
AC100-277V >0.95 >80 145° 125Lm/W
5000K/6500K
1-10W/PWM/Timer 843687 75W
Smart Control Options Dimming, 3 Timer Modes,
Photocell, Sensors 843690 120W
125Lm/W
Die-cast aluminum &
Material
Tempered glass
Color Silver Grey 1-10V PWM
Suspended,
Installation Options
Pole mounted
IES Files Available
Available Accessories Extra Features
- 10KV or 20KV Surge Protection Device - Non-flickering Driver
- 7-pin NEMA receptacle
32Traditional Park Lights Controller
With Photocontrol
Details
Installation Method
Advantages
Top LED light source The respiratory system, ensure the dust resistance
Mast arm Post top
The best heat conductivity Water resistance and self cleaning ability
Convenient installation to replace HPS directly Aesthetic style
Without Glass Frosted Glass Clear Glass Without Glass Frosted Glass Clear GlassTraditional Park Lights Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
420mm
650mm
750mm
420mm
70mm
Specifications Features & Certificates Product Parameter
Driver Brand Inventronics
5yrs IP66 IK08 Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
Warranty
LED Chip Osram
847218 20W
Operating Temperature -40°C ~ +50°C 847222 30W
847226 40W
Smart Control Options / 125Lm/W 135Lm/W
847230 50W Type 2S 125Lm/W
Material Aluminum & PC 847234 60W
0-10V
847238 70W
Color Metal
847242 80W 30000K/4000K
AC120-277V >0.9 >70
5000K/6500K
Installation Options Pole mounted 847219 20W
847223 30W
IES Files Available
847227 40W
Type 135Lm/W
Available Accessories Extra Features 847231 50W
2S/2M/3M/4S
847235 60W
- Suitable for post top or mast arm installation - 10KV Surge Protection Device included
- Installation pipe diameter: Ø76mm - Standard model is without glass. Frosted or 847239 70W
Clear glass covers available
847243 80W
36Pegasus Park Series Internal structure
LEDs arrangement
Advantages
Intergrated Driver
Various light distribution options for
symmetric or asymmetric lighting effect
Easily accessible driver compartment
LEDs are placed on the upper part of the lampPegasus Park Series Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
Ø430mm
487mm
Installation pipe diameter: Ø76mm
Specifications Features & Certificates Product Parameter
Driver Brand Inventronics/ Osram
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
LED Chip Osram 5yrs IP66 IK09
Warranty
844471 25W
Operating Temperature -40°C ~ +45°C
844475 35W
3000K/4000K/
AC120-240V >0.95 >70 80°x155° 130Lm/W
5000K/5700K
844479 45W
Smart Control Options 1-10V/DALI Dimming,
Photocell, Timer dimming
844483 60W
130Lm/W
Material Aluminum & PC
Color Black 1-10V DALI
Installation Options Pole mounted
IES Files Available
Available Accessories Extra Features
- 7-pin NEMA receptacle - 10kV Surge Protection Device included
- 20kV Surge Protection Device - Non-flickering Driver
40Aurora Park Series Easy driver maintenance Mounting options
Method A: Post top
LEDs arrangement Method B: Mast/Column arm
Advantages
Multiple mounting options: Cable suspended, mast/
column arm entry and post top installation.
High intensity die-cast aluminum body with impact
grade that reaches IK08
Easily accessible driver compartment
Various light distribution options for
symmetric or asymmetric lighting effect
LEDs are placed on the upper part of the lamp Method C: Cable suspended
Tempered glass coverAurora Park Series Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
514mm
681mm
Installation pipe diameter: Ø76mm
Specifications Features & Certificates Product Parameter
Driver Brand Philips
Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
LED Chip Samsung 5yrs IP66 IK08
Warranty
844495 35W
Operating Temperature -40°C ~ +45°C
844499 45W 3000K/4000K/
AC120-240V >0.95 >70 155°x80° 120Lm/W
5000K/6500K
844503 65W
Smart Control Options 1-10V Dimming,
Photocell, Timer dimming
844507 80W
120Lm/W
Material Aluminum & Temp. Glass
Color Black 1-10V DALI
Suspended,
Installation Options
Pole mounted
IES Files Available
Available Accessories Extra Features
- 7-pin NEMA receptacle - 10kV Surge Protection Device included
- 20kV Surge Protection Device - Non-flickering Driver
44Venus Park Series LEDs arrangement
LEDs are placed on the upper
part of the lamp
Color options
Available Accessories Extra Features
Elegant design available in two colours.
Smooth polyester powder coated housing
and UV-resistanr PC diffuser.
High intensity die-cast aluminum body with
that reaches IK10. Golden
impact gradeWhite
Designed to light parks, squares and pedestrian areas
it incorporates direct & indirect lighting photometry.Venus Park Series Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
Ø460mm
730mm
Installation pipe diameter: Ø76mm
Specifications Features & Certificates Product Parameter
Driver Brand Inventronics/
Philips/ Osram Item No. Power Voltage PF CCT CRI Beam Angle Lm/W
LED Chip Cree 5yrs IP66 IK10
Warranty
843934 20W AC120-277V
Operating Temperature -30°C ~ +50°C
843938 38W 3000K/4000K/ 135°x45°/
>0.95 >70 100Lm/W
5000K 135°x135°
843944 55W AC200-240V
Smart Control Options 1-10V/DALI Dimming
843950 73W
100Lm/W
Material Aluminum & PC
Color White/ Golden 1-10V DALI
Installation Options Pole mounted
IES Files Available
48Halo Park Series Smooth Surface
● Smooth surface to avoid dust
& dirt accumulation
● Seamless surface to ensure
rainwater scouring
● Avoids accumulation of leaves,
sand or other solid materials,
minimizes environment impact
on luminare performance.
LEDs arrangement Water resistance
Available Accessories
Elegant design, ideal solution for parks, public High intensity die-cast aluminum housing with an-
squares, playgrounds and pathways. ti-corrosion treatment
Smooth surface housing with UV stabilized polyes- High efficiency coatings. Paint and metal parts
ter powder paint finish for durability and corrosion succefully passed the salt spray test.
resistance.
Super High Efficiency of 160LM/W in all wattage
options.Halo Park Series Light Distribution Diagram
Type 0 Type 1S Type 1M Type 1L Type 2S
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Type 2M Typev3L Type 3S Type 3M Type 3L
-/+180 -/+180 -/+180 -/+180 -/+180
-150 150 -150 150 -150 150 -150 150 -150 150
-120 120 -120 120 -120 120 -120 120 -120 120
-90 90 -90 90 -90 90 -90 90 -90 90
-60 60 -60 60 -60 60 -60 60 -60 60
-30 30 -30 30 -30 30 -30 30 -30 30
0 0 0 0 0
Dimensions
Ø380mm Ø500mm
162mm 168mm
Installation pipe diameter:
50W/80W/100W/150W 200W/240W 0.95 >80 60°/90°/120° 160Lm/W
6500K
845480 150W
Material Aluminum 845483 200W
845486 240W
160Lm/W
Color Grey
Installation Options Pole mounted
1-10V DALI
IES Files Available
52Street light control Street light monitoring and fault detection
Each TELECELL unit can measure an extensive range of parameters. Readings can be returned using programmed
Switching and dimming control is extremely flexible in the PLANet system. Lights are grouped according to their switch- monitoring or ad hoc interrogation.
ing program. There is no limit on the number of groups and programs can be configured with a range of options. Measurable parameters include:
Lamp condition: Times: Electrical:
• Failure Cycling • Switching cycles • Instant power
• Day burning • Burn hours • instant current
• BSCP event log • Instant power factor
Switching methods: Days of week control: Trimming: • Average power
• by time e.g. 5pm • e.g. different switching at • Optimized/auto trim • Average current
Mains supply: TELECELL unit: • Average power factor
• by solar calendar weekends burning hours
e.g. 10 min after sunrise • Instant voltage • Temperature
• Average voltage • Missing data Energy:
• by light level e.g. 10 Lux
• Low voltage (from loss of supply • Active energy
• combination of these • Power cycles or communication) • Cumulative energy
Some of the measurable parameters can be used to generate faults or warnings. These are reported and summarized
on a daily basis. On some parameters, thresholds can be set which, when triggered, can cause immediate alarms.
Standard control programs: Calendar control: Override:
• photocell • special events • Quick switching changes
• part night on/off • seasonal adjustments across groups/whole
• part night dim population Energy reporting
• fixed times • respond to incidents
The first requirement in managing energy consumption is to be able to measure it accurately. Each TELECELL unit
• use for maintenance
contains a metering chip so cumulative active energy is measured precisely for every fixture. This allows true energy
consumption to be shown for any filtered set of lights for any calendar period.
Custom control programs: Dimming control: Load reduction:
Street light maintenance
• up to 10 switching steps • With 0-10V or DALI ballasts • Enables demand-side
• Dim to any level 0-100% balancing With comprehensive monitoring capabilities, the PLANet system is an effective tool for improving and streamlining main-
(ballast permitting) tenance operations, resulting in a better lighting service for the public. The system contributes significantly to delivering
an enhanced service by:
Reducing night maintenance Bulk lamp change policies: Fault diagnosis:
inspections: • prompt lamp failure detection • Lamps: failure, cycling, day burning
• Avoids patrolling in dangerous means bulk change period can be • Ballasts: power factor
areas extended, while maintaining overall • Mains supply: power cuts, over
• Inspections can be less frequent outages levels within targets voltage
and carried out in the day time • Lost connection: internal wiring,
column down
Examples: Improving inventory: Extending range of information Reducing repair times:
• Monitoring reveals potential dis- available: • Avoids time wasted between
crepancies in inventory • Mains supply profile night inspections
• Maintenance operatives’ perfor- • Understanding lamp failures
Dusk Down Dusk Over Down mance enables repair to be scheduled
70 Lux 35 Lux 20 Lux ride 5 Lux
more quickly
ΟΝ ΟΝ
Dim
Integration with asset management systems
The PLANet system can be interfaced to asset management systems allowing the import and export of asset data and
fault reporting and generate work orders from those systems. The interfaces range from simple CSV based file transfer
ΟFF ΟFF
to XML based web service interfaces to popular systems such as Mayrise and Pitney Bowes “Confirm”.
12:00 16:00 20:00 midnight 04:00 08:00 12:00 16:00 20:00 midnight 04:00 08:00Warranty Policy 10. Within the applicable warranty period and on examination IINNO determines to its satisfaction that such Product
failed to satisfy this warranty, IINNO will, at its option, repair or replace the Product or the defective part thereof, or
reimburse Purchaser the purchase price. For purposes of clarity, ‘repair or replace the Product or the defective part
Warranty for IINNO-Branded Professional LED Luminaires thereof’ does not include any removal or reinstallation activities, costs or expenses, including without limitation, labor
This document sets out the warranty policy of IINNO from which you purchase your professional lunimaires.
costs or expenses.
Terms and Condition 11. If IINNO chooses to replace the Product and is not able to do so because it has been discontinued or is not available,
IINNO may refund the purchaser or replace the product with a comparable product (that can show small deviations in
design and product specification).
1. This warranty is only applicable to IINNO branded lighting products sold by IINNO Limited (hereinafter referred to as 12. Warranty claims have to be reported and returned to IINNO office within 30 days after discovery, specifying at least
‘Product’). the following information (additional information may be required on request):
2. The warranty is only applicable to the party purchasing the products directly from IINNO (Hereinafter referred to as Details of the failed Products; and for System
‘Purchaser’). Third party products sold by IINNO are not covered under this warranty. With respect to products sold to warranties also details of other components used;
the Purchaser by IINNO, but not bearing the IINNO name or sub-brands, IINNO makes no warranty of any kind, express Installation date and invoice date;
or implied, including, without limitation, any warranty of merchantability or fitness for a particular purpose, but will make
available to the Purchaser upon request, but only to the extent permitted by law and relevant contracts, the warranties of
Detailed problem description, number and % of
the manufacturer of the relevant product.
failures date-code of failure;
Application, hours burned and number of switching cycles.
3. No agent, distributor or dealer is authorized to change, modify or extend the terms of the warranty on behalf of IINNO.
13. Where a warranty claim is justified, IINNO will pay for freight expenses. IINNO may charge Customer for returned
4. IINNO warrants that each Product will be free from defects in material and workmanship. The foregoing warranty shall Products that are not found to be defective or non-conforming together with the freight, testing and handling costs
be valid for the period mentioned in the applicable warranty clause for the Products referred to in IINNO’s confirmation associated therewith.
of your PI.
14. The warranty and remedies contained in this warranty are the only warranties given by IINNO with respect the
5. The warranty term starts from the production date printed on the products used in professional applications. Products and are given in lieu of all other warranties, whether express or implied, including without limitation warranties
of merchantability or fitness for a particular purpose, which warranties are hereby disclaimed.
6. The warranty period is based on a burning behaviour of max. 4000 hours/year. In case of more than 4000 hours/year,
the warranty period will be adjusted pro-rata. 15. These terms and conditions state IINNO’s entire liability and obligation to Purchaser and Purchaser’s sole and
exclusive remedy in connection with defective or non-conforming Products supplied by IINNO to Customer, whether or
7. This warranty only applies when the Product has been properly wired and installed and operated within the electrical not such damages are based on any warranty not explicitly mentioned in these terms and conditions, tort, contract or
values, operating range and environmental conditions provided in the specifications, application guidelines, IEC any other legal theory, even if IINNO has been advised or is aware of such defects.
standards or any other document accompanying the Products.
16. This is a limited warranty and excludes, among other items, installation, providing access to products (scaffolding,
Additionally, installation must be performed only by authorized personnel, who will establish that the above mentioned lifts, etc.), and special, incidental and consequential damages (such as loss of revenue/profits, damage to property or
precautions will be taken under consideration. other miscellaneous costs not previously mentioned), and is further defined by the limitations and conditions set forth in
the respective warranty policy and these terms and conditions.
8. This warranty does not apply to damage or failure to perform arising as a result of any Acts of God or from any abuse,
existing local network (or Public grid) failure, misuse, abnormal use or use in violation of any applicable standard, 17. Upon request, IINNO’S representatives shall be allowed access to the defective Product, system or application for
code or instructions for use, including without limitation, those contained in the latest safety, industry and/or electrical verification of non-compliance.
standards for the relevant region(s).
18. IINNO cannot be held liable for electrical supply conditions, including supply spikes, over-voltage/under-voltage and
9. IINNO reserves the right to the validity of a guarantee claim. For this purpose, the Purchaser must return, with Ripple Current control systems that are beyond the specified limits of the products and those defined by relevant supply
sufficient postage, for analysis (enclosing a copy of the delivery note or the invoice). standards (e.g. EN 50160 norms).You can also read
