WSQ ADVANCED CERTIFICATE IN INDUSTRIAL DESIGN (FURNITURE)
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
WSQ ADVANCED
CERTIFICATE IN
INDUSTRIAL DESIGN
(FURNITURE)
Total No. of Courses: 8
Total Training Hours: 181.5
For enquiries or to apply, please contact
SFIC Institute at 6496 9451 or email to enquiry@sficinstitute.com
WSQ DEMONSTRATE KNOWLEDGE OF
PRODUCTION
WSQ ADVANCED CERTIFICATE IN INDUSTRIAL DESIGN (FURNITURE)
Introduction Total Training Hours: 24 hours (3 days)
This course covers demonstrating the
knowledge of production. The skills Competency Level
include demonstrating knowledge of Level 3 (Advanced Certificate)
production terminology, production
processes, cost and materials. It facilitates Training Pathway
technical communication and the ability The WSQ Demonstrate Knowledge of
to work as a team member. Product unit provides a pathway to the
WSQ Advanced Certificate in Industrial
Course Objectives/Outline Design (Furniture)
1. Demonstrate knowledge of relevant
production terminology and Course Fee
vocabulary. WDA-Funded Course Fee*: $308.16 nett
2. Demonstrate knowledge of relevant Full Course Fee: $1,027.20 nett
production processes.
3. Demonstrate basic knowledge on the *For Singaporeans/PRs only. In addition, employers
costs of production. may apply for SME claimable training grant top-up of
$192 (equivalent to 20% of full course fee before GST)
4. Demonstrate knowledge of various and absentee payroll funding under the Skills
materials used in production. Redevelopment Programme (SRP) up to 80% hourly
basic salary capped at $7.50/hr. Other terms and
Assessment Activities conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
The assessment will be a report that
at any point in time without prior notice.
outlines the relevant production process
and outcome using the appropriate For enquiries, please contact
production terminology and vocabulary SFIC Institute at 6496 9451 or email to
for a design project. The assignment is to enquiry@sficinstitute.com
be submitted two weeks after completing
the class. A 30-minute interview session To apply, please download application
will be arranged. It will comprise of a 15- form from www.sficinstitute.com
minute presentation by the participant (click “Courses”) and send to
followed by oral questions and feedback enquiry@sficinstitute.com
from the assessor.
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
WSQ PRESENT INFORMATION
WSQ ADVANCED CERTIFICATE IN INDUSTRIAL DESIGN (FURNITURE)
Introduction Total Training Hours: 16 hours (2 days)
This course aims to equip the participant
with the skills and knowledge for Competency Level
identifying the presentation objectives Level 3 (Advanced Certificate)
and formats; gathering and analysing the
necessary information; developing Training Pathway
presentation and presentation collaterals; The WSQ Present Information unit provides a
presenting information in appropriate pathway to the WSQ Advanced Certificate
formats, as well as evaluating in Industrial Design (Furniture)
presentations.
Course Fee
Course Objectives/Outline WDA-Funded Course Fee*: $205.44 nett
1. Identify presentation objectives and Full Course Fee: $684.80 nett
presentation formats in accordance
to organizational procedures *For Singaporeans/PRs only. In addition, employers
2. Gather and analyse the necessary may apply for SME claimable training grant top-up of
$128 (equivalent to 20% of full course fee before GST)
information to support presentation and absentee payroll funding under the Skills
objectives Redevelopment Programme (SRP) up to 80% hourly
3. Develop presentations and basic salary capped at $7.50/hr. Other terms and
presentation collaterals, if necessary, conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
to support presentation structure
at any point in time without prior notice.
4. Present information in appropriate
presentation formats to achieve For enquiries, please contact
presentation objectives SFIC Institute at 6496 9451 or email to
5. Evaluate presentations to determine enquiry@sficinstitute.com
areas for improvement
To apply, please download application
Assessment Activities form from www.sficinstitute.com
The participant is required to submit an (click “Courses”) and send to
assignment two weeks after completing enquiry@sficinstitute.com
the course. A 30-minute interview session
will then be arranged and it comprises of
a 15-minute presentation by the
participant, followed by questions and
feedback from the assessor.
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
WSQ MAINTAIN AN AWARENESS OF TRENDS
AND DEVELOPMENTS IN DESIGN, MATERIALS,
TECHNIQUES AND TECHNOLOGY
WSQ ADVANCED CERTIFICATE IN INDUSTRIAL DESIGN (FURNITURE)
Introduction Total Training Hours: 24 hours (3 days)
This course aims to equip participants with
the skills and knowledge to maintain an Competency Level
awareness of what is going on within an Level 3 (Advanced Certificate)
environment where design processes and
activities take place. The skills include Training Pathway
developing an inquiring attitude, the The WSQ Maintain an Awareness of Trends
ability to research and make suggestions and Developments in Design, Materials,
from research to improve and make the Techniques and Technology unit provides a
design environment more efficient and pathway to the WSQ Advanced Certificate
effective. in Industrial Design (Furniture)
Course Objectives/Outline Course Fee
1. Identify and explore by research WDA-Funded Course Fee*: $308.16 nett
trends and developments in design, Full Course Fee: $1,027.20 nett
materials and design technologies
based on the needs of the project *For Singaporeans/PRs only. In addition, employers
2. Identify and explore by research the may apply for SME claimable training grant top-up of
$192 (equivalent to 20% of full course fee before GST)
availability of materials and the and absentee payroll funding under the Skills
developments in design technologies Redevelopment Programme (SRP) up to 80% hourly
to inform the design process and basic salary capped at $7.50/hr. Other terms and
exploration of innovative design conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
concepts
at any point in time without prior notice.
3. Apply researched information on
trends and developments from a For enquiries, please contact
theoretical and historical perspective SFIC Institute at 6496 9451 or email to
to relate trends to new developments enquiry@sficinstitute.com
4. Use researched information to
explore, develop and communicate To apply, please download application
design ideas based on the needs of form from www.sficinstitute.com
the project (click “Courses”) and send to
enquiry@sficinstitute.com
Assessment Activities
The participant is required to submit an
assignment two weeks after completing
the course. A 30-minute interview session
will then be arranged and it comprises of
a 15-minute presentation by the
participant, followed by questions and
feedback from the assessor.
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
WSQ IMPLEMENT DESIGN THINKING
Introduction Total Training Hours: 24 hours (3 days)
This course covers the principles of design
thinking to achieve innovation. The skills Competency Level
include using design thinking principles Level 3 (Advanced Certificate)
and applying appropriate techniques of
each stage of the design thinking Training Pathway
process, to develop innovation that The WSQ Implement Design Thinking unit
meets user needs, wants and desires. A provides a pathway to the WSQ Advanced
design thinking toolkit, CueditTM, will be Certificate in Industrial Design (Furniture)
used to trigger, stimulate and catalyze
the iterative design thinking process. Course Fee
WDA-Funded Course Fee*: $449.40nett
Course Objectives/Outline Full Course Fee: $1498.00nett
1. Carry out the Understand stage of the
design thinking process to gather *For Singaporeans/PRs only. In addition, employers
insights may apply for SME claimable training grant top-up of
2. Carry out the Explore stage of the $280 (equivalent to 20% of full course fee before GST)
design thinking process to propagate and absentee payroll funding under the Skills
Redevelopment Programme (SRP) up to 80% hourly
potential solutions
basic salary capped at $7.50/hr. Other terms and
3. Carry out the Test stage of the design conditions may apply. SFIC Institute and WDA reserve
thinking process to refine and improve the right to amend any of these terms and conditions
on potential solutions at any point in time without prior notice.
Assessment Activities For enquiries, please contact
Throughout the course the participant will SFIC Institute at 6496 9451 or email to
be going through each stage of the enquiry@sficinstitute.com
design thinking process to demonstrate
the appropriate use of the design thinking To apply, please download application
methods and techniques during the form from www.sficinstitute.com
development process, and the adoption (click “Courses”) and send to
of the core attitudes of design thinking enquiry@sficinstitute.com
during the development process, to
prepare and submit towards the end of
the course an innovation derived from a
problem statement gained from insights
which has empowering and inspirational
elements that fulfils user needs, wants
and desires, in the form of a written
assignment.
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
WSQ PREPARE NEW DESIGN
WSQ ADVANCED CERTIFICATE IN INDUSTRIAL DESIGN (FURNITURE)
Introduction Total Training Hours: 48 hours (6 days)
This course covers the designing of new
products or sub-assemblies. The skills Competency Level
include establishing design requirements; Level 3 (Advanced Certificate)
identifying constraints; and, producing
and modifying design ideas with Training Pathway
consideration to production methods, The WSQ Prepare New Design unit provides
materials, processes and feasibility. a pathway to the WSQ Advanced
Certificate in Industrial Design (Furniture)
Course Objectives/Outline
• Identifying the design issues and Course Fee
problems. Not available as an individual unit.
• Establishing the design brief for
specification of the design For enquiries, please contact
requirements based on the client’s SFIC Institute at 6496 9451 or email to
needs. enquiry@sficinstitute.com
• Developing the design in consideration
of the factors that may influence the To apply, please download application
design solution(s). form from www.sficinstitute.com
• Identifying any constraints. (click “Courses”) and send to
• Producing design concept sketches in enquiry@sficinstitute.com
the appropriate media.
• Investigating and evaluating the
design production processes, methods,
testing requirements and material
requirements.
• Preparing production information.
• Evaluating the quality of the design
solution in meeting the requirements.
• Making changes to design in response
to test and evaluation outcomes of the
design prototype.
• Preparing a full documentation of
project information and ensuring
compliance.
Assessment Activities
The assessment will comprise two written
assignments which will be completed by
the candidate after the training and a
presentation followed by oral questions
and feedback.
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
APPLY PROFESSIONAL PRACTICES IN
DESIGN PROJECTS
Introduction Total Training Hours: 16 hours (2 days)
This course covers the key elements of
professional practices to be applied in Competency Level
design projects. The skills include applying Level 3 (Advanced Certificate)
appropriate codes of professional
conduct; preparing a design brief and Training Pathway
contract proposal; and interpreting The WSQ Apply Professional Practices in
intellectual property rights principles and Design Projects unit provides a pathway to
their applications within a design context. the WSQ Advanced Certificate in Industrial
Design (Furniture)
Course Objectives/Outline
1. Demonstrate professional conduct Course Fee
within the design industry in WDA-Funded Course Fee*: $205.44 nett
accordance with the codes of Full Course Fee: $684.80 nett
professional conduct established by
the industry’s design association *For Singaporeans/PRs only. In addition, employers
2. Prepare a design brief to articulate may apply for SME claimable training grant top-up of
$128 (equivalent to 20% of full course fee before GST)
the objectives and specifications of and absentee payroll funding under the Skills
the design project Redevelopment Programme (SRP) up to 80% hourly
3. Prepare a contract proposal in basic salary capped at $7.50/hr. Other terms and
accordance with the organisational conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
contract, fees and services guidelines
at any point in time without prior notice.
4. Interpret Intellectual Property Rights
(IPR) principles and their applications For enquiries, please contact
within a design context SFIC Institute at 6496 9451 or email to
enquiry@sficinstitute.com
Assessment Activities
Throughout the course, the participant To apply, please download application
will perform case studies, role plays and form from www.sficinstitute.com
do written assignments. (click “Courses”) and send to
enquiry@sficinstitute.com
SFIC Institute is a subsidiary of the Singapore Furniture Industries Council
WSQ SUPERVISE, PRODUCE AND REALISE SUITABLE DESIGN
PROTOTYPES TO MEET THE NEEDS OF CLIENT
Introduction Total Training Hours: 20 hours (2 .5days)
This course covers supervising, realising or
producing of 2D and 3D prototypes, Competency Level
models, mock-ups, samples or test pieces. Level 4 (Advanced Certificate)
The skills include establishing criteria for
prototype production and testing, and Training Pathway
evaluating the prototype. The WSQ Supervise, Produce And Realise
Suitable Design Prototypes To Meet the
Course Objectives/Outline Needs of Client unit provides a pathway to
1. Establish requirements for prototype the WSQ Advanced Certificate in Industrial
production and testing Design (Furniture)
2. Supervise production of prototypes to
ensure conformance to design Course Fee
specifications WDA-Funded Course Fee*: $449.40nett
3. Coordinate testing of prototypes in Full Course Fee: $1498.00nett
accordance to production
procedures *For Singaporeans/PRs only. In addition, employers
4. Establish criteria for evaluation of may apply for SME claimable training grant top-up of
$280 (equivalent to 20% of full course fee before GST)
prototypes and absentee payroll funding under the Skills
5. Evaluate prototype against evaluation Redevelopment Programme (SRP) up to 80% hourly
criteria basic salary capped at $7.50/hr. Other terms and
conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
Assessment Activities
at any point in time without prior notice.
Throughout the course, the participant
will perform case studies, role plays, do For enquiries, please contact
written assignments, supervise and SFIC Institute at 6496 9451 or email to
produce 2D and 3D prototypes. enquiry@sficinstitute.com
To apply, please download application
form from www.sficinstitute.com
(click “Courses”) and send to
enquiry@sficinstitute.com
SFIC Institute is a subsidiary of the Singapore Furniture Industries CouncilWSQ APPLY BASIC NEGOTIATION SKILLS AND
TECHNIQUES
Introduction Total Training Hours: 9.5 hours (1 day)
This course covers identifying negotiation
outcomes and roles and responsibilities, Competency Level
preparing the necessary information for a Level 3 (Advanced Certificate)
negotiation, using basic negotiation
processes and techniques, as well as Training Pathway
documenting negotiations. The WSQ Apply Basic Negotiation Skills and
Techniques unit leads to a Statement of
Course Objectives/Outline Attainment (SOA) for each competent
1. Identify negotiation outcomes in participant.
commercial situations to establish
organisation’s desired position in the Course Fee
negotiation WDA-Funded Course Fee*: $205.44 nett
2. Identify roles and responsibilities Full Course Fee: $684.80 nett
needed to support negotiation
objectives *For Singaporeans/PRs only. In addition, employers
3. Prepare relevant background may apply for SME claimable training grant top-up of
$128 (equivalent to 20% of full course fee before GST)
information to understand other and absentee payroll funding under the Skills
parties’ position Redevelopment Programme (SRP) up to 80% hourly
4. Use negotiation processes and basic salary capped at $7.50/hr. Other terms and
techniques to assist in achieving conditions may apply. SFIC Institute and WDA reserve
the right to amend any of these terms and conditions
desired negotiation outcomes
at any point in time without prior notice.
5. Record negotiations for evaluation
and documentation purposes For enquiries, please contact
SFIC Institute at 6496 9451 or email to
Assessment Activities enquiry@sficinstitute.com
Throughout the course, the participant
will perform case studies, role plays, and To apply, please download application
do written assignments. form from www.sficinstitute.com
(click “Courses”) and send to
enquiry@sficinstitute.com
SFIC Institute is a subsidiary of the Singapore Furniture Industries CouncilYou can also read
