Sitrain combining theory with practice - Australian Training Catalogue - Digital Asset ...
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Sitrain combining
theory with practice
Australian Training Catalogue
www.siemens.com.au/sitrain
Contents
ONLINE TRAINING OFFER – Hands on Remote and on demand. 3
• Sitrain Access 3
• Hands on remote training S7 PLC Classic – S7 300/400 Programming and maintenance 4
• Hands on remote training Simatic TIA Portal Programming 1 5
• Hands-on remote training Simatic TIA Portal Advanced Programming 6
• Hands on remote VSD Training in TIA Portal 7
• Hands on remote WinCC Machine Level TIA Portal 8
• Hands on remote Simatic PCS 7 System 9
Scheduled and On-Site Face to Face Training – PLC, HMI and VSD Based Technology 10
• S7 PLC Classic - S7 300/400 Programming and Maintenance 10
• TIA Portal Programming 1 11
• TIA Portal Advance Programming 12
• SIMATIC System Update TIA Portal 13
• WinCC SCADA Basic Configuration 14
• WinCC Machine Level - TIA Portal 15
• Step 7 Distributed Safety Configuration and Programming 16
• TIA Portal Distributed Safety Configuration and Programming 17
• SIMATIC - Motion Control 1 in TIA Portal 18
Scheduled and On-Site Face to Face Training – Specialized in Drives and Motor Control Based Technology 19
• SINAMICS GH180 Diagnostic and Service (Perfect Harmony) 19
• SINAMICS G150/G130/S150 Diagnostic and Service 20
• SINAMICS GM150 Diagnostic and Service 21
• SINAMICS GL150 Diagnostic and Service 22
• SINAMICS S120 Diagnostic Chassis & Cabinet 23
• SINAMICS S120 Diagnostic and Service using STARTER Software 24
• SINAMICS S120 Parameterizing and Commissioning using STARTER Software 25
• SINAMICS S120 Parameterizing and Commissioning using START Drive (TIA) 26
• SIMOTION with SINAMICS S120 Diagnostic and Service using SIMOTION SCOUT Software 27
• G120 Parameterizing and Commissioning using Start Drive (TIA) 28
• SINAMICS G120 Parameterizing and Commissioning using STARTER Software 29
• SINAMICS DCM Parameterizing and Commissioning 30
• SINAMICS DCM Diagnostic and Service 31
• SINAMICS G180 (Dynavert T) Diagnostic and Service 32
• SIMOVERT MasterDrives (product discontinued) Maintenance 33
Scheduled and On-Site Face to Face Training – PCS7 software Based Technology 34
• Simatic PCS 7 System 34
• Simatic PCS 7 Service 35
• Simatic PCS 7 SIMIT 36
• Simatic PCS 7 Safety 37
• Simatic PCS 7 Advanced AS Engineering 38
• Simatic PCS 7 Batch 39
• Simatic PCS 7 Advanced OS Engineering 40
Booking information 41
Notes 42
Sitrain combining theory with practice | Australian Training Catalogue 2
ONLINE TRAINING OFFER – Hands on
Remote and on demand
Sitrain Access
SITRAIN access is learning in the digital age. It offers individualized ways to build knowledge
and access to exclusive digital training courses. Take advantage of sustainable learning success
with a wide range of methods. Improve your skills – whether in groups or by yourself.
Whenever, wherever and however you need to.
The digital learning services provided by SITRAIN Access cover a range of topics relating to the
Siemens product portfolio and help ensure greater transparency: Learners know how far they
have progressed, what knowledge they still need, and the best way to obtain it. Companies
get an overview of the level of knowledge their employees have reached and can propose or
assign further suitable courses.
All learning content is structured on a modular basis and can be utilized as you see fit after you
subscribe: Several hours at a time, or just a few minutes on the way to work – the choice is
yours
Booking details:
Course
ACCESS-P
Code
Duration 1 YEAR INDIVIDUAL SUBSCRIPTION
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 3
ONLINE TRAINING OFFER – Hands on
Remote and on demand
Sitrain Access
SITRAIN access is learning in the digital age. It offers individualized ways to build knowledge
and access to exclusive digital training courses. Take advantage of sustainable learning success
with a wide range of methods. Improve your skills – whether in groups or by yourself.
Whenever, wherever and however you need to.
The digital learning services provided by SITRAIN Access cover a range of topics relating to the
Siemens product portfolio and help ensure greater transparency: Learners know how far they
have progressed, what knowledge they still need, and the best way to obtain it. Companies
get an overview of the level of knowledge their employees have reached and can propose or
assign further suitable courses.
All learning content is structured on a modular basis and can be utilized as you see fit after you
subscribe: Several hours at a time, or just a few minutes on the way to work – the choice is
yours
Booking details:
Course
ACCESS-P
Code
Duration 1 YEAR INDIVIDUAL SUBSCRIPTION
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 3
Hands on remote training S7 PLC Classic – S7
300/400 Programming and maintenance
Course content: Course description:
▪ The course focused on the concept of both ▪ Live online tutorial plus simultaneously
programming and fault finding for remote access to control a S7-300 PLC
hardware and software with a practical based training System.
hands-on approach. ▪ Using Simatic Classic software, recognise
▪ Topics covered include Totally Integrated and evaluate software and hardware faults
Automation (TIA), incorporating the PLC, in a S7 TIA system
HMI and Networking. ▪ Understanding the role of Functions (FC’s)
▪ All topics are backed up with practical and Function Blocks (FB’s)
exercises using a conveyor model and ▪ Storing process data in Data Blocks (DB’s)
simulator with ET200s, TP170B HMI and ▪ Configuring and application of
G120 VSD. Organisation Blocks (OB’s)
Designed for: ▪ Analogue value processing
Engineers, technicians, consultants,
▪ Integrate devices on a Profibus DP network
electricians.
▪ Use Simatic WinCC Flex to configure HMI
Benefits: devices
• Remote training from your location - Pre-requisite
No need for travel (reducing idle time Basic knowledge of control and PLC concepts
and expenses) with the ability to use a Microsoft Windows
• Training from your home/office PC
• In addition of the standard training
course the attendee will learn all about Equipment requirement
remote connectivity to a Siemens
Personal Computer with high speed internet
controlled Industrial system.
(unlimited download data account is
Interaction between simulated and real
preferred).
equipment, test and troubleshooting
using Proneta software plus our Web One or two additional monitor(s)
server (PLC) and Sm@rt Server (HMI) (recommended 2 additional monitors 24inch
options. for optimum experience)
Booking details:
Course
RT-7PROG1
Code
Duration 3.5 days
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 4
Hands on remote training Simatic TIA Portal
Programming 1
Course content: Benefits:
▪ Overview and significant performance ▪ Remote training from your location - No
characteristics of the SIMATIC S7 system need for travel (reducing idle time and
family (S7-1200 & S7-1500) expenses)
▪ Training from your home/office
▪ The components of the TIA Portal: STEP 7, ▪ In addition of the standard training
WinCC, communication course the attendee will learn all about
▪ Program execution in automation systems remote connectivity to a Siemens
controlled Industrial system. Interaction
▪ STEP 7 block types and program structuring
between simulated and real equipment,
▪ Binary and digital operations in the test and troubleshooting using Proneta
function block diagram (FBD) software plus our Web server (PLC) and
▪ Programming of reusable blocks in PC’s and Sm@rt Server (HMI) options.
FB’s Course description:
▪ Data management with data blocks ▪ Live online tutorial plus simultaneously
▪ Programming organisational blocks remote access to control a S7-1500 PLC
▪ Test tools for system information, based training System.
troubleshooting, and diagnostics ▪ The Totally Integrated Automation Portal
▪ Hardware Configuration and (TIA Portal) forms the work environment for
parameterization of the S7 1500 PLC, a integrated engineering with SIMATIC STEP
PROFINET IO System with ET200SP a 7 and SIMATIC WinCC
Comfort Touch Panel and a G120 VSD ▪ In this first part of the SIMATIC TIA Portal
▪ Deeper understanding of contents through programming training, we teach you the
practical exercises on TIA system model handling of the TIA Portal, basic knowledge
Designed for: standard PLC programming. You also
receive an overview of HMI, PROFINET IO,
Engineers, technicians, consultants,
electricians. and connecting drives.
Equipment requirement
Pre-requisite
Personal Computer with high speed internet.
Basic knowledge of control and PLC concepts Recommended 2 additional monitors 24inch
with the ability to use a Microsoft Windows for optimum experience
PC
Booking details:
Course
RT-TIA1
Code
Duration 3.5 days
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 5
Hands-on remote training Simatic TIA Portal
Advanced Programming
Course content: Course description:
Students will learn to leverage the power of Upon completion of this course, the student
TIA Portal software with advanced structured shall be able to:
programming techniques.
• Leverage the power of Block and Function
A systems approach to efficiently libraries.
programming the S7-1500, S7-1200, S7-300, • Use LAD and STL for Programming required
and S7- 400 PLC is covered. Integration and functions
connectivity of PROFINET IO, HMI, and G120 • Employ direct and indirect addressing in a
Drive are the central focus of this course. program.
• Incorporate System Functions (SFC) in a
Programming emphasis centres on Ladder program.
(LAD), and Statement List (STL) logic with an • Integrate an HMI and Drive system with the
introduction to Structured Control Language PLC on a PROFINET network.
(SCL), and S7-GRAPH. Both direct and indirect • Program Instance and Multi-Instance Block
addressing are an integral part of the course. calls.
• Use interrupt-driven and error processing
The core issues of efficient use of CPU program execution blocks.
resources, establishing communications, • Leverage STEP7 advanced diagnostics.
passing information, and managing
integrated diagnostics are included. Skills in
error management and extended diagnostics Pre-requisite
are reinforced throughout this agenda. This ▪ Must have complete Simatic TIA Portal
course includes classroom instruction, Programming (TIA-PRO1)
demonstration, and considerable hands-on
lab work.
Designed for:
This course is for SIMATIC S7-1500, S7-1200,
S7-300, and S7-400 PLC users with basic
engineering experience in the design and
sustaining of SIMATIC automation systems
and their application programs.
Booking details:
Course
RT-TIA2
Code
Duration 3.5 days
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 6
Hands on remote VSD Training in TIA Portal
Course content: Course description:
In this course you will combine a SIMATIC S7- The Course will step you through connecting
1500 controllers with a G120 drive in the TIA a G120 to the Siemens S7-1500 PLC
Portal. You will be able to integrate and • You will look at connection methods of a
commission a G120 Drive with TIA Portal on drive and PLC, (Profinet)
ProfiNet - ProfiDrive. Use of SinaSpeed block. • PLC – Drive communication (Telegrams)
• Simple commissioning of the drive
▪ In this technology course, you will learn
step by step the benefits and the use of • Control of the drive in the PLC
programming
these functions. After each learning step,
you will deepen your knowledge with • Advanced control of the drive and
additional feedback to the PLC
hands-on programming.’
• How to show additional diagnostics from
the drive on the HMI
Designed for:
Pre-requisite
Programmers, Commissioning engineers,
Knowledge of programming in the SIMATIC
Engineering personnel, Maintenance TIA Portal (equivalent to knowledge after
personnel, Service personnel completion of the TIA-PRO1 course)
If you have not completed the course, please
contact us to discuss your skill base before
registering for the course.
Booking details:
Course
RT-TIA-MCC
Code
Duration 1 day
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 7
Hands on remote WinCC Machine Level TIA
Portal
Course content: Course description:
▪ The WinCC basic configuration course covers ▪ System overview of TIA Portal, SIMATIC
all aspects WinCC (machine-level)
required for basic project configuration ▪ Creating a SIMATIC WinCC project
▪ The course begins with the basic program ▪ Configuration of connection to the SIMATIC
structure and emphasis is given to practical S7 automation system
exercises covering relevant ▪ Basics of graphic image creation for operator
topics control and monitoring
Designed for: ▪ User administration
Engineers, technicians, consultants, ▪ Alarm display, alarm logging, alarm
electricians configuration
This course is aimed at people who created and▪ Tag logging, trend configuration, trend
edit HMI projects on Comfort Panels only using display
TIA Portal. ▪ Recipes
Pre-requisite ▪ Use of various HMI stations
▪ TIA Portal 1 (Remote or face to face) ▪ Deeper understanding of contents through
practical exercises on SIMATIC S7-1500
PC and Windows experience is essential
system model
Booking details:
Course RT-TIA-WCCM
Code
Duration 2 days
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 8
Hands on remote Simatic PCS 7 System
Course content: Course description:
▪ System overview and architecture: As a user of the Process Control System
subsystems for automation, operation, SIMATIC PCS 7, you will learn how to apply
communication and engineering. the engineering features in a structured and
efficient way. Supported by examples and
▪ Configuration concept: from the field level exercises, demonstrating that the process
up to the HMI level. automation of a plant is realised from the
▪ Network and hardware configuration. field level up to the HMI level. The key
aspects of SIMATIC PCS 7 are covered, e.g.
▪ Process Object View as a plant-based
its system-wide consistency, plant-oriented
structure of the project. configuring, data and project management
▪ Standardising by library and block concept, and the co-operation between the various
process tag types, models. components and tools.
▪ Automation solutions by graphical Pre-requisite
configuration with CFC and SFC.
Basic understanding of process control
▪ Monitoring and controlling. systems.
▪ Distributed engineering (Multi Project).
Designed for:
▪ HMI configuration: graphics, trending,
Engineering level course predominantly for
alarming, reports.
personnel involved in the design and
▪ Configuration of client/server and server implementation of PCS7 process control
redundancy. system: control engineers, technicians,
consultants. Also recommended for the
operations and maintenance personnel
requiring more in-depth knowledge of the
system. e.g. for system modification tasks.
Booking details:
Course RT-PCS7SYS
Code
Duration 9.5 days
Delivery ONLINE - Training from your home/office
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 9Scheduled and On-Site Face to Face
Training – PLC, HMI and VSD Based
Technology
S7 PLC Classic - S7 300/400 Programming and
Maintenance
Course content: Course description:
▪ The course focused on the concept of both ▪ Using Simatic Classic software, recognise
programming and fault finding for and evaluate software and hardware faults
hardware and software with a practical in a S7 TIA system
hands-on approach. ▪ Understanding the role of Functions (FC’s)
▪ Topics covered include Totally Integrated and Function Blocks (FB’s)
Automation (TIA), incorporating the PLC, ▪ Storing process data in Data Blocks (DB’s)
HMI and Networking. ▪ Configuring and application of Organisation
▪ All topics are backed up with practical Blocks (OB’s)
exercises using a conveyor model and ▪ Analogue value processing
simulator with ET200s, TP170B HMI and
▪ Integrate devices on a Profibus DP network
G120 VSD.
▪ Use Simatic WinCC Flex to configure HMI
Designed for:
devices
Engineers, technicians, consultants,
electricians. Pre-requisite
Basic knowledge of control and PLC concepts
with the ability to use a Microsoft Windows
PC
Booking details:
Course
ST-7PROG1
Code
Duration 3.5 days
Training locations in major capitals.
Delivery
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 10TIA Portal Programming 1
Course content: Course description:
▪ Overview and significant performance ▪ The Totally Integrated Automation Portal
characteristics of the SIMATIC S7 system (TIA Portal) forms the work environment
family (S7-1200 & S7-1500) for integrated engineering with SIMATIC
▪ The components of the TIA Portal: STEP 7, STEP 7 and SIMATIC WinCC
WinCC, communication ▪ In this first part of the SIMATIC TIA Portal
▪ Program execution in automation systems programming training, we teach you the
handling of the TIA Portal, basic knowledge
▪ STEP 7 block types and program structuring
standard PLC programming. You also
▪ Binary and digital operations in the
receive an overview of HMI, PROFINET IO,
function block diagram (FBD)
and connecting drives.
▪ Programming of reusable blocks in PC’s and
▪ You can deepen your theoretical
FB’s
knowledge with numerous practical
▪ Data management with data blocks exercises on a TIA system model. This
▪ Programming organisational blocks consists of a SIMATIC S7 automation
▪ Test tools for system information, system, ET200 distributed I/O, Touch panel,
troubleshooting, and diagnostics drive and a belt model.
▪ Hardware Configuration and ▪ After attending the course, you can do the
parameterization of the S7 1500 PLC, a following:
PROFINET IO System with ET200SP a ▪ Understand the fundamentals of
Comfort Touch Panel and a G120 VSD interaction of the TIA components
▪ Program documentation and saving ▪ Solve simple programming tasks using
▪ Deeper understanding of contents through elementary STEP 7 instructions
practical exercises on TIA system model ▪ Reliably operate the “TIA Portal”
Designed for: engineering platform
Engineers, technicians, consultants, ▪ Program simple plant functions with
electricians. basic STEP 7 instructions in the ladder
diagram (LAD) or function block
Pre-requisite diagram (FBD)
Basic knowledge of control and PLC concepts
with the ability to use a Microsoft Windows
PC
Booking details:
Course
TIA-PRO1
Code
Duration 3.5 days
Training locations in major capitals.
Delivery
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 11TIA Portal Advance Programming
Course content: Course description:
Students will learn to leverage the power of Upon completion of this course, the student
TIA Portal software with advanced structured shall be able to:
programming techniques.
• Leverage the power of Block and Function
A systems approach to efficiently libraries.
programming the S7-1500, S7-1200, S7-300,
and S7- 400 PLC is covered. Integration and • Use LAD and STL for Programming required
connectivity of PROFINET IO, HMI, and G120 functions
Drive are the central focus of this course.
• Employ direct and indirect addressing in a
Programming emphasis centres on Ladder program.
(LAD), and Statement List (STL) logic with an
introduction to Structured Control Language • Incorporate System Functions (SFC) in a
(SCL), and S7-GRAPH. Both direct and indirect program.
addressing are an integral part of the course.
• Integrate an HMI and Drive system with the
The core issues of efficient use of CPU PLC on a PROFINET network.
resources, establishing communications,
• Program Instance and Multi-Instance Block
passing information, and managing
calls.
integrated diagnostics are included. Skills in
error management and extended diagnostics • Use interrupt-driven and error processing
are reinforced throughout this agenda. This program execution blocks.
course includes classroom instruction,
demonstration, and considerable hands-on • Leverage STEP7 advanced diagnostics.
lab work.
Pre-requisite
Designed for:
▪ Must have complete Simatic TIA Portal
This course is for SIMATIC S7-1500, S7-1200, Programming (TIA-PRO1)
S7-300, and S7-400 PLC users with basic
engineering experience in the design and
sustaining of SIMATIC automation systems
and their application programs.
Booking details:
Course
TIA-PRO2
Code
Duration 3.5 days
Training locations in major capitals.
Delivery
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 12SIMATIC System Update TIA Portal
Course content: Course description:
• In this course you will learn about the major • Engineering tools TIA Portal components:
differences between SIMATIC S7-300/400 and SIMATIC STEP 7 and SIMATIC WinCC
SIMATIC S7-1500, the engineering tools • Introduction of the SIMATIC S7-1500
SIMATIC Manager and TIA Portal, as well as hardware
STEP 7 V5.x and STEP 7 based on TIA Portal. • Configuration of devices and networks of
• the SIMATIC S7 system family using
• You will learn the possibilities of the SIMATIC S7-1500 as an example
configuration and the advanced programming • Working with the PLC Tag Table in TIA
of a SIMATIC S7-1500 automation system Portal
with the "TIA Portal" engineering platform. • Program blocks and editor
• • Advanced programming possibilities of a
• After attending the course, you can: SIMATIC S7-1500
• Efficiently use the "TIA Portal" • Troubleshooting with TIA Portal tools and
engineering platform the SIMATIC S7-1500 CPU display
• Configure and program components of • Presentation of the Structured Control
the SIMATIC S7-1500 automation Language (SCL) editor
system with the TIA Portal • Presentation of the SIMATIC WinCC
• Perform a commissioning of TIA operator control and monitoring system
components • Migration of a SIMATIC STEP 7 V 5.x
project to SIMATIC STEP 7 based on TIA
Designed for: Portal
Programmers, Commissioning engineers, • Adaption of a SIMATIC S7-300/400
Engineering personnel, Maintenance program to the SIMATIC S7-1500
personnel, Service personnel
• Presentation of the 'StartDrive'
engineering tool with interfacing to a
Pre-requisite
SINAMICS G120 drive
• Completed the SIMATIC ST-7PROG1 (Classic)
• Deeper understanding of contents
course and practical experience.
through practical exercises on the SIMATIC
o If you have not completed the course, please
S7-1500 system model
contact us for an entry test to ensure that you
have enough knowledge before attending the
course.
o
Booking details:
Course
TIA-SYSUP
Code
Duration 3.5 days
Training locations in major capitals.
Delivery
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 13WinCC SCADA Basic Configuration
Course content: Course description:
▪ The WinCC basic configuration course ▪ WinCC System overview
covers all aspects required for basic project ▪ Creating a project and configuring internal
configuration and external tags
▪ The course begins with the basic program ▪ Develop configuration techniques using the
structure and emphasis is given to practical Graphics Designer
exercises covering relevant topics ▪ Creating picture windows and customised
Designed for: objects
Engineers, technicians, consultants, ▪ Using the user administrator, alarm and tag
electricians logging
Pre-requisite ▪ Configuring reports using the Report
▪ Basic knowledge of control and PLC Designer
concepts
▪ PC and Windows experience is essential
Booking details:
Course ST-B WINCCS
Code
Duration 4 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 14WinCC Machine Level - TIA Portal
Course content: Course description:
▪ The WinCC basic configuration course ▪ System overview of TIA Portal, SIMATIC
covers all aspects WinCC (machine-level)
required for basic project configuration ▪ Creating a SIMATIC WinCC project
▪ The course begins with the basic program ▪ Configuration of connection to the SIMATIC
structure and emphasis is given to practical S7 automation system
exercises covering relevant ▪ Basics of graphic image creation for
topics operator control and monitoring
Designed for: ▪ User administration
Engineers, technicians, consultants, ▪ Alarm display, alarm logging, alarm
electricians configuration
This course is aimed at people who created ▪ Tag logging, trend configuration, trend
and edit HMI projects on Comfort Panels only display
using TIA Portal. ▪ Recipes
Pre-requisite ▪ Use of various HMI stations
▪ TIA Portal 1 (Remote or face to face) ▪ Deeper understanding of contents through
practical exercises on SIMATIC S7-1500
▪ PC and Windows experience is essential
system model
Booking details:
Course ST-TIA-WCCM
Code
Duration 3 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 15Step 7 Distributed Safety Configuration and
Programming
Course content: Course description:
This course is aimed at everyone who wants ▪ Overview of the standards and guidelines.
to learn the handling, fault diagnosis, ▪ Configuring Distributed Safety: system
engineering and commissioning of the
parameterisation, programming, system
SIMATIC S7-300F fail safe automation system
as well as the philosophy of failsafe handling, fault diagnosis, documentation,
controllers, the diagnosis and fault handling and acceptance.
/correction ▪ Fail safe peripherals with Distributed Safety.
Please note: this course doesn’t give the ▪ Diagnosis (CPU-Diagnosis, Peripheries-
attendee safety certification; it is based on Diagnosis, further diagnosis tools).
how to use the safety part of the Step 7 ▪ Programming: emergency stop, protective
Classic software. door, safety-oriented tripping, passivation,
Designed for: programming features.
Engineers, technicians, consultants, Pre-requisite
electricians. ▪ Basic knowledge of control and PLC
concepts.
▪ An understanding and experience with
STEP 7 Software or completion of the
Programming and Troubleshooting Course.
Booking details:
Course S7-PPDS
Code
Duration 1 day
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 16TIA Portal Distributed Safety Configuration and
Programming
Course content: Course description:
This course is for engineers and personnel ▪ Locate and understand the applicability of the
responsible for implementing and detailed documentation and development
maintaining SIMATIC S7 TIA Portal resources
Distributed Safety systems, including:
▪ Select and configure the Failsafe Hardware
▪ Selecting the appropriate architecture components and understand their application
▪ Selecting the components and restrictions.
understanding their specific purposes ▪ Properly implement a Safety program in the
and limitations PLC.
▪ Specifying the module and system wiring ▪ Document, test, and troubleshoot the system.
▪ Developing the safety PLC program Pre-requisite
▪ Starting up, supporting, and ▪ Must have complete Simatic TIA Portal
troubleshooting the system. Programming (TIA-PRO1)
Please note: this course doesn’t give the Designed for:
attendee safety certification; it is based on Engineers, technicians, consultants, electricians.
how to use the safety part of the Step 7
Classic software.
Booking details:
Course S7-TIAS
Code
Duration 2 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 17SIMATIC - Motion Control 1 in TIA Portal
Course content: Course description:
In this course you will program the SIMATIC S7- ▪ Basics of motion control
1500 controllers in the TIA Portal. You will be ▪ Speed-Axis technology object
able to precisely control the motion of axes
with the integrated motion control functions. ▪ Positioning-Axis technology object
▪ Homing and traversing movements
▪ In this technology course, you will learn step
▪ Programming with PLC-open
by step the benefits and the use of these
▪ Error messages and diagnostics
functions. After each learning step, you will
deepen your knowledge with hands-on ▪ Communication and libraries
programming.’ ▪ Output cam and measuring input
▪ Closed-loop control and optimization
▪ After attending the course, you will ▪ Synchronous-Axis technology object
understand the interaction of the
▪ Practical exercises on training devices
technological functions. You will be able to
with SIMATIC S7-1500 and SINAMICS
select and configure appropriate technology
drive
objects, such as speed axis, positioning axis
and synchronous axis, and integrate them in
your program. Pre-requisite
Designed for: Knowledge of programming in the SIMATIC
TIA Portal (equivalent to knowledge after
Programmers, Commissioning engineers, completion of the TIA-PRO1 course)
Engineering personnel, Maintenance personnel, If you have not completed the course,
Service personnel please contact us to discuss your skill base
before registering for the course.
Booking details:
Course
TIA- MC1
Code
Duration 3 days
Training locations in major capitals.
Delivery
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 18Scheduled and On-Site Face to Face
Training – Specialized in Drives and
Motor Control Based Technology
SINAMICS GH180 Diagnostic and Service (Perfect
Harmony)
Course content: Course description:
▪ Overview of drive and motor This training course covers operating and
▪ Personal safety aspects servicing of SINAMICS PERFECT HARMONY
GH180 drives. You will understand the
▪ Design and function of the SINAMICS
functional concept and the control structures.
PERFECT HARMONY GH180 drive system
You will diagnose its status and analyse its
▪ System Topology: multi winding function using the integral cabinet control
transformer, pre-charging circuit, power panel, the TOOL SUITE PC tool and the DEBUG
cells, cell bypass, actual value monitoring, tool.
hardware identification and circuit
diagrams Pre-requisite
▪ Application, function and interaction of Basic knowledge of electrical engineering.
control boards
▪ Fault log: Analysing alarm and fault Designed for:
messages Project, service, maintenance and operating
▪ Parameter assignment, diagnosis and data personnel who are exposed to Sinamics
backup (via integral control panel, via TOOL GH180 (Perfect Harmony) drive systems and
SUITE PC program) are involved in first line trouble shooting.
▪ Extensive lab work on setting parameters
and analysing the drive's functions (via
integral control panel, via TOOL SUITE PC
program)
Booking details:
Course DR-GH18-DG
Code
Duration 2 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 19SINAMICS G150/G130/S150 Diagnostic and
Service
Course content: Designed for:
▪ Drive system structure and Project, service, maintenance and operating
documentation/service overview personnel who are exposed to Sinamics G150
drive systems and are involved in first line
▪ Basic commissioning, servicing, and
trouble shooting.
diagnosis with AOP30 and the STARTER tool
▪ Hardware functions, circuit overview and Course description:
function diagrams This course provides you with the technical
▪ Setup, electrical connection, EMC knowledge required for basic commissioning
and service activities on SINAMICS chassis
▪ Using the memory card: Structure and data and cabinet G150 versions.
backup
▪ Setting up an online connection between Practical exercises to identify faulty modules
with outline of fault rectification utilising to
PC and SINAMICS S120 via
replace user replaceable spares.
PROFIBUS/Ethernet
▪ Data backup using the STARTER After the course you know how to
commissioning tool commission and optimise a basic drive
system, apply spare parts and monitor drive
▪ Structure of a STARTER project: Drive system using the AOP30 operator panel and
objects, components and DRIVE-CLiQ STARTER tool.
topology
An introduction to PROFIBUS communication
▪ Test mode with STARTER: Operator panel,
is also provided,
measuring functions.
▪ Recording signals with the trace function, This maintenance training is designed to
long-term trace, triggers on bit patterns increase the fault finding knowledge of
technical personnel aiding in the diagnosis of
▪ Procedures for replacing control units, possible drive operational issues.
power modules and motors
▪ Analysis of enabling signals and alarms Pre-requisite
▪ Practical exercises using training devices Basic knowledge of electrical engineering.
Booking details:
Course DR-G15-DG
Code
Duration 2 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 20SINAMICS GM150 Diagnostic and Service
Course content: Course description:
▪ Design and function of components used This training course covers operation and
within SINAMICS GM150 servicing of SINAMICS GM150 drives. You will
understand the functional concept and the
▪ Power Topology: pre-charging, line- and
control structures. You will parameterize the
motor-side inverter, actual value drive, diagnose its status and analyse its
monitoring, hardware identification and function and faults using the operator panel
circuit diagrams AOP30 and the tool STARTER.
▪ Drive CLiQ-topology, objects and
Pre-requisite
components
Basic knowledge of electrical engineering.
▪ Parameter assignment, diagnosis and data
backup via operator panel AOP30 and PC- Additional Comments
Tool STARTER The course combines theory and practical
▪ Functionality and analysis of "set point work. This will include a GM150 system
channel" and "control" overview and the functional description of
system components. Sinamics control system
▪ Analysing alarm and fault messages exercises will be carried out on a Sinamics
▪ Configuring and analysing the PROFIBUS GM150 desk simulator that shares the control
communication "SINAMICS GM150 - essentials with the GM150. The simulator is
SIMATIC S7" executed as a Sinamics low voltage drive
system running on 240V supply including
▪ Personnel Safety on working with Variable motor for closest real-life feedback in a safe
Speed Drives. manner. Identification and handling of power
Designed for: components can be done on a customer full
size production unit if safe access is made
Project, service, maintenance and operating
available during the duration of this course.
personnel who are exposed to Sinamics
GM150 drive systems and are involved in first
line trouble shooting.
Booking details:
Course DR-GM15-DG
Code
Duration 3 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 21SINAMICS GL150 Diagnostic and Service
Course content: Course description:
▪ Design and function of components used This training provides you with the basics for
within SINAMICS GL150 understanding operation and maintenance of
the drive system SINAMICS GL150. You know
▪ Power Topology: pre-charging, line- and
the control structure and the communication
motor-side inverter, actual value interface. You will be able to diagnose the
monitoring, hardware identification and state of the drive and to analyse faults. For
circuit diagrams this purpose you use the operator panel
▪ Drive CLiQ-topology, objects and AOP30 and the PC-Tool STARTER.
components Pre-requisite
▪ Parameter assignment, diagnosis and data Basic knowledge of electrical engineering.
backup via operator panel AOP30 and PC-
Tool STARTER Additional Comments
▪ Functionality and analysis of "set point The course is split in equal parts into "theory"
channel" and "control" (classroom presentation) and "lab work. Lab
work is carried out on Sinamics GL150 desk
▪ Analysing alarm and fault messages simulator that shares the control essentials
▪ Configuring and analysing the PROFIBUS with the GL150. The simulator is executed as
communication "SINAMICS GL150 - a Sinamics low voltage drive system running
SIMATIC S7" on 240V supply including motor for closest
real-life feedback in a safe manner.
▪ Personnel Safety on working with Variable Identification and handling of power
Speed Drives. components can be done on a customer full
Designed for: size production unit if safe access is made
available during the duration of this course.
Project, service, maintenance and operating
personnel who are exposed to Sinamics
GL150 drive systems and are involved in first
line trouble shooting.
Booking details:
Course DR-GL15-DG
Code
Duration 3 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 22SINAMICS S120 Diagnostic Chassis & Cabinet
Course content: Designed for:
▪ Design and circuit diagrams of SINAMICS Service personnel and/or maintenance
S120 chassis units personnel.
▪ Design and circuit diagrams of the
SINAMICS S120 CM cabinet units Course description:
▪ Working with the AOP30 Advanced This course is specifically designed for
Operator Panel personnel supporting SINAMICS S120 drive
systems installations with power ratings
▪ Access to parameters and interfaces
exceeding 100 kW. The course will cover the
▪ Diagnostics, data backup and
various modules in a typical cubicle installation
recommissioning
and their function. The focus is on
▪ Working with the Starter PC Software tool understanding the Sinamics drive systems
▪ Access to parameters and interfaces components in order to undertake first level
▪ Diagnostics, data backup and targeted trouble shooting utilising block
recommissioning diagrams, the Starter Software and the AOP30
▪ Drive Diagnostics with operator panel. This will include the
▪ LED Indications replacement of major system modules. You will
be able to back up data and recommission the
▪ AOP Faults and Alarms (Fault Alarm
drive system.
history)
▪ Starter Software Fault/Alarm buffer Pre-requisite
▪ Control Word/Status word and Missing General knowledge about drive technology
enables
▪ Using of trace function for signal
recording (Oscilloscope function)
▪ Working on the converter when service is
required:
▪ Power unit diagnostics using the
Multimeter
▪ Replacing electronic modules and
installing replacement parts
▪ Replacing the Power Block
Booking details:
Course DR-S12-CHA
Code
Duration 2 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 23SINAMICS S120 Diagnostic and Service using
STARTER Software
Course content:
▪ Principles and overview of the SINAMICS ▪ Overview of parameters for service
S120 purposes
▪ Motors and encoders for the SINAMICS ▪ Analysis of enabling signals and alarms
S120 Practical exercises using training devices
▪ Diagnostics by visual check and use of LED Designed for:
displays and multimeters Service and maintenance personnel who are
▪ Using the memory card: Structure and data exposed to Sinamics S120 drive systems and
backup are involved in first line trouble shooting.
▪ Setting up an online connection between Course description:
PC and SINAMICS S120 via PROFIBUS
Unplanned stoppages of production
/Ethernet
machines can cost a lot of money. In this
▪ Data backup using the STARTER course, you learn the proper way to handle a
commissioning tool SINAMICS S120 drive system when a fault
occurs. You will be able to rectify faults more
▪ Structure of a STARTER project: Drive
quickly and make minor adaptations to the
objects, components and DRIVE-CLiQ
parameter assignment. That will save time
topology and money. The practical exercises are
▪ Test mode with STARTER: Operator panel, conducted on a book size SINAMICS S120
measuring functions, self-optimization converter system with synchronous and
asynchronous motors.
▪ Recording signals with the trace function,
long-term trace, triggers on bit patterns Pre-requisite
▪ Procedures for replacing control units, Basic knowledge of electrical engineering.
power modules and motors
▪ Motor defects: Diagnostic possibilities on
site
▪ Encoder defects: Diagnostics, replacement
and adjustment
Booking details:
Course DR-S12-DG
Code
Duration 4 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 24SINAMICS S120 Parameterizing and
Commissioning using STARTER Software
Course content: Course description:
▪ Design of the drive system and overview of This training course encompasses the basics
documentation and service of the SINAMICS S120 drive system. It
provides the technical knowledge required
▪ Start-up and parameterization with the
for start-up, parameterization, drive
STARTER commissioning tool optimization, and troubleshooting.
▪ Diagnostics and troubleshooting
Practical exercises for reinforcing the
▪ Fundamentals of communication via
knowledge gained are carried out on the
PROFIBUS SINAMICS S120 Training Case. On
▪ Software functions, closed-loop control and completion of the course, you will be able to
optimization of SERVO and VECTOR drives implement automation solutions with the
SINAMICS S120. You can carry out start-up
▪ Start-up of the integral basic positioner
and optimization of the SINAMICS S120
(EPOS) quickly and effectively with skilful use of the
▪ Practical exercises on the Training Kit STARTER commissioning tool. Trained staff
has the potential to increase the availability
Designed for:
of S120 systems in your plant.
Project, commissioning, service, maintenance
and operating personnel who are exposed to If you like to use Software START DRIVE in
Sinamics S120 drive systems and are involved TIA PORTAL, we recommend the course DR-
in first line trouble shooting. S12-PMT with apart from that same content.
Pre-requisite
Basic knowledge of electrical engineering.
Booking details:
Course DR-S12-PM
Code
Duration 4 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 25SINAMICS S120 Parameterizing and
Commissioning using START Drive (TIA)
Course content: Course description:
▪ Design of the drive system and overview of This training course encompasses the basics
documentation and service of the SINAMICS S120 Drive system. It
provides the technical knowledge required
▪ Start-up and parameterization with the Start
for start-up, parameterization, drive
Drive commissioning tool (TIA Portal) optimization, and troubleshooting.
▪ Diagnostics and troubleshooting
Practical exercises for reinforcing the
▪ Fundamentals of communication via
knowledge gained are carried out on the
PROFIBUS SINAMICS S120 Training Case. On
▪ Software functions, closed-loop control and completion of the course, you will be able
optimization of SERVO and VECTOR drives to implement automation solutions with the
SINAMICS S120. You can carry out start-up
▪ Start-up of the integral basic positioner
and optimization of the SINAMICS S120
(EPOS) quickly and effectively with skilful use of the
▪ Practical exercises on the Training Kit Start Drive commissioning tool. Trained
staff has the potential to increase the
Designed for:
availability of S120 systems in your plant.
Project, commissioning, service, maintenance
and operating personnel who are exposed to If you like to use Software STARTER we
SINAMICS S120 drive systems and are involved recommend the course DR-S12-PM with
in first line trouble shooting. apart from that same content.
Pre-requisite
Basic knowledge of electrical engineering.
Booking details:
Course DR-S12-PMT
Code
Duration 4 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 26SIMOTION with SINAMICS S120 Diagnostic and
Service using SIMOTION SCOUT Software
Course content: Designed for:
▪ Overview of SIMOTION and SINAMICS Service and maintenance personnel who are
S120 components exposed to Simotion/Sinamics S120 drive
▪ Engineering system SCOUT and the systems and are involved in first line
troubleshooting.
integrated commissioning tool STARTER
Course description:
▪ Structure of a SIMOTION project
Unplanned downtimes of production machines
▪ Setting up online connections via
can be very costly. This course shows you how
PROFIBUS and PROFINET
to diagnose a SIMOTION D automation system
▪ Drive objects, components and topology and SINAMICS S120 drive system confidently
▪ Handling the CF-card: structure and should operational issues occur. You have the
potential to rectify faults more quickly and
backing up files
make adjustments to the control program to
▪ Diagnoses with SCOUT and the SIMOTION suit changed operational conditions.
IT Web browser
Practical exercises are carried out on a system
▪ Parameter overview for service purposes
installed with SIMOTION D, SINAMICS S120 in
▪ Service relevant changes to executable frame size: “book size”.
control programs
Pre-requisite
▪ Diagnosing and replacing of modules,
motors, encoders, cables, and HMI Basic knowledge of automation and drive
engineering.
▪ Analysis of enabling signals and alarms
▪ Service functions: trace, measurement
functions
▪ Practical exercises on training devices
Booking details:
Course : MC-SMO-DG
Code
Duration 4 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 27G120 Parameterizing and Commissioning using
Start Drive (TIA)
Course content: Course description:
▪ Design of the SINAMICS G120 drive system In this course, we teach the know-how
▪ Commissioning and parameterization with required for configuring and initial start-up of
the SINAMICS G120 drive system. Practical
the Start Drive (TIA PORTAL) commissioning
exercises using a SINAMICS G120 Training
tool Case are an important component. On
▪ Converter functions (flying restart, brake, completion of the course, you will have
closed-loop control) mastered safe handling of the Start Drive
commissioning tool. This allows you to
▪ Data maintenance
effectively use different converter functions,
▪ Flexible signal switching with BICO optimize closed-loop controls, and thus
technology achieve the greatest possible familiarisation
▪ Safety Integrated functions when working with SINAMICS G120 systems.
▪ Diagnostics and troubleshooting Pre-requisite
▪ Practical exercises using the training case Basic knowledge of electrical engineering.
Designed for:
Project, commissioning, service, maintenance
and operating personnel who are exposed to
Sinamics G120 drive systems and are involved
in first line trouble shooting.
Booking details:
Course DR-G12-PMT
Code
Duration 2 days or 1-day training with reduced course content also possible (Please contact
us for pricing)
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 28SINAMICS G120 Parameterizing and
Commissioning using STARTER Software
Course content: Course description:
▪ Design of the SINAMICS G120 drive system In this course, we teach the know-how
▪ Commissioning and parameterization with required for configuring and initial start-up of
the SINAMICS G120 drive system. Practical
the STARTER commissioning tool
exercises using a SINAMICS G120 Training
▪ Converter functions (flying restart, brake, Case are an important component. On
closed-loop control) completion of the course, you will have
▪ Data maintenance mastered safe handling of the STARTER
commissioning tool. This allows you to
▪ Flexible signal switching with BICO effectively use different converter functions,
technology optimize closed-loop controls, and thus
▪ Safety Integrated functions achieve the greatest possible familiarisation
when working with SINAMICS G120 systems.
▪ Diagnostics and troubleshooting
▪ Practical exercises using the training case Pre-requisite
Designed for: Basic knowledge of electrical engineering.
Project, commissioning, service,
maintenance and operating personnel who
are exposed to Sinamics G120 drive systems
and are involved in first line trouble
shooting.
Booking details:
Course DR-G12-PM
Code
Duration 2 days or 1-day training with reduced course content also possible (Please contact
us for pricing)
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 29SINAMICS DCM Parameterizing and
Commissioning
Course content: Designed for:
▪ Structure and functional principles of the Project, commissioning, service, maintenance
SINAMICS DC MASTER converter: Control and operating personnel who are exposed to
Unit CUD, Power Module, excitation circuit, Sinamics DCM drive systems and are involved
in first line trouble shooting.
interfaces
▪ Commissioning and parameterization Course description:
activities using the BOP20 and AOP30 This training course shows you how to adapt
operator panels as well as the STARTER PC the parameter settings for the converter in
program line with the application and DC motor. It also
gives you the opportunity to broaden your
▪ Using CompactFlash cards: Structure and
theoretical knowledge by means of exercises
data backups
carried out on special training equipment.
▪ Optimizing current regulation and closed- Once you have completed the course, you
loop speed control, automatic optimization will be familiar with the functions of a
converter and the respective interfaces. You
▪ Function block diagrams: Set point channel,
will also be able to commission a converter
inputs/outputs, free function blocks quickly and reliably. Routine fault diagnosis
▪ Information on Drive Control Charts (DCC) and rectification help save time and optimize
▪ Drive-end interface to PROFIBUS / PROFINET the availability of your plant.
▪ Expansions with Terminal Modules and Pre-requisite
Sensor Modules via DRIVE-CLiQ Basic knowledge of electrical engineering.
▪ Parallel connections and peer-to-peer
interfaces
▪ Operating states, alarms, and fault codes
▪ Service functions: Trace, measurement
functions, diagnostic memories
▪ Practical exercises with the AOP30 and
STARTER on training equipment
Booking details:
Course DR-DCM-PM
Code
Duration 3 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 30SINAMICS DCM Diagnostic and Service
Course content: Designed for:
▪ Structure and functional principles of the Project, commissioning, service, maintenance
SINAMICS DC MASTER converter: Control and operating personnel who are exposed to
Unit CUD, Power Module, excitation circuit, Sinamics DCM drive systems and are involved
in first line trouble shooting.
interfaces
▪ Changing parameters, backing up data and Course description:
performing diagnostics with Operator This training course shows you how to adapt
panels BOP20 and AOP30 and PC program the parameter settings for the converter in
STARTER line with the application and DC motor. It also
gives you the opportunity to broaden your
▪ Checking the operating state and enable
theoretical knowledge by means of exercises
signals
carried out on special training equipment.
▪ Checking the signal flow using Function Once you have completed the course, you
diagrams: Set point channel, will be familiar with the functions of a
inputs/outputs, free function blocks converter and the respective interfaces. You
will also be able to commission a converter
▪ Test operation with STARTER Control Panel quickly and reliably. Routine fault diagnosis
▪ Replacement of Control Unit, fan and fuses and rectification help save time and optimize
▪ Drive-end interface to PROFIBUS / PROFINET the availability of your plant.
▪ Recording of signals using the trace Pre-requisite
function, Triggering for faults and bit Basic knowledge of electrical engineering.
patterns. Use of the trend recorder function
for long-term recording.
▪ Analysis of alarms and fault messages,
read-out of the diagnostic memory
▪ Practical exercises with the AOP30 and
STARTER on training equipment
Booking details:
Course DR-DCM-DG
Code
Duration 3 days
Delivery Training locations in major capitals.
On-site training is available (please contact us for pricing)
Investment Please see Training Price List.
Phone Siemens Service – Training, 1300 369 515
Email sitrain.au@siemens.com
Sitrain combining theory with practice | Australian Training Catalogue 31You can also read
