MAZDA 6 Special DVD/GPS System Manual - Please read this manual carefully before using this product and properly keep the manual for future use.
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.
MAZDA 6 Special DVD/GPS
System Manual
Please read this manual carefully before using this product and
properly keep the manual for future use.
Generated by Foxit PDF Creator © Foxit Software
Foreword http://www.foxitsoftware.com For evaluation only. Contents
Foreword
Contents
Thank you for purchasing this Audio/Video product.
This system according to the principle of MAZDA 6’s central storage box Safety statement 1
utilization, develop and product by standard specification make the car all-round
System operation 2
upgrade, adding funny while driving.
Remote control operation 3
This player can play DVD VCD CD CD-R/CD-RW MP3 Kodak picture CD
disc. Wiring diagram 4
There is SD card interface in this machine, you can insert the digital camera’s
Basic Operation 6
SD card to browse image directly, and also can play the MP3, WMA, JPG, and etc
Main menu operation 6
files which stored in the SD card.
There is USB interface in this machine, and the machine can be connected with Bluetooth&Navigation operation 7
U&USB hard disk, and mobile phone with USB function, can play DVD, VCD, MP3,
DVD operation 8
WMA, JPG and etc files.
AV /Reverse operation 10
This machine has the Bluetooth function, and paired with cell phone-line can dial
and receive calls; Also available via the machine to play music on the local mobile TV operation 11
phone. Specifications 14
Map matching 15
Most of the functions can be operated by the remote control, please
consult the manual.
Generated by Foxit PDF Creator © Foxit Software
Safety statement http://www.foxitsoftware.com For evaluation only. System operation
1. Safety statement 2. System operation
1. This system suitable for 03~ 08 MAZDA 6 cars, sports car and WAGON
multifunctional car, and installed and maintained by professor. Note:For
03-05 models,need to short down "L716" component in the original car CD
machine.
2. When using this system, need start-up the original car’s radio, and FM the
frequency to 87.7MHZ, can listen this system’s voice normally.
3. Please do not use hard pawed thing to bump, and write touch screen, from
causing the touch screen fragmentation or breakage.
4. This system is full-automatic flip type, and please do not put goods on the
head cover.
5. This system is double drive motor structure, it is normal that there is slight
noise when enable and close the system because of the machine running.
6. When cleaning the display screen, please use software cloth to wipe the
surface, and please do not use gasoline, diluents and any other kinds of
solutions.
7. Do not play this product in too high or too low temperature. Before power on,
ensure the temperature inside your car is between -10 to +65 . Power-off button: Close system Next song: Downward select song, press
8. Humidity may cause moisture which is coagulated on the lens of the player MODE Switch to DVD , GPS, AV, TV, and hold 2 seconds fast-forward.
which affects its optimum performance. Here switch on the power; make the Bluetooth status Sound channel switch: Switch left/right
player operate 1-2 hours without the disk to vaporize moisture. Close structure: Only close the structure, sound channel or language.
9. System using high pressure assembly, please do not separate it without but the system still work. USB jack: Play the files of U disk.
authorization, if occurred fault or need maintenance service, please consult NAVI:Exchange current function to SD card jack: Play the files of SD card.
the supplier or appointed maintenance department. navigation interface. GPS-SD card jack: Need insert correct
PS: if occurred can not open or close, please press “POWER” and “ Up down flip” EX:Back to GPS interface map card
Remote control receiving window: Receive Touch screen, TFT screen : Function via
key to reset, then press “POWER"open key; do not force to move the structure.
the remote control signal. touch screen operation
MIC: Bluetooth mic hole Start-up, power-off button: Open or close
Warning
In/out disc:In out disc. system
According to avoid offense traffic regulation, prevent accident occurred,
Play/Pause:Play or pause Open structure: Press this key to open
make the passenger and car safety on driving, please drive intently, do not
Previous song:Upward select song, press structure and system.
watch the system playing contents or operate this system.
and hold 2 seconds fast backward. Disc in /out interface.
1 2
Generated by Foxit PDF Creator © Foxit Software
Remote control operation http://www.foxitsoftware.com For evaluation only. Wiring diagram
3. Remote control operation 4. Wiring diagram
. 21 20 19
18
1
2
17
3
16
4
15
5
14
6
7
13
8
12
11
9
10
1. Start, power off button: start-up or power 12. Numeric adjustment: Adjust value in the
off image adjustment menu.
2. 0-10 number key : Select desired 13. Repeat play: Repeat play song/chapter
song directly. 14. DVD system setting: Enter DVD system
3. Sound channel switch: Switch left right setting menu.
channel or language. 15. Cursor move, confirm
4. System switch 16. Return the disc’s title menu Back right sound channel audio output Astern video input ( black line yellow
(grey line red head) head
5. Return main menu. 17.Screen display: Display the data Back left channel audio output (grey line Video input ( black line yellow head)
6. Fast forward, fast backward. information of the disc white head
7.USB, SD, DVD selection: select reading 18.Caption language: Change the caption Front right sound channel audio output GPS antenna interface
mode language (black line red head) Power Wiring The other end to plug into
Front left sound channel audio output
8. Previous song, next song Select song 19. In/Out disc button: In/Out disc. (black line white head) the audio socket on the back of the CDC
upward or downward. 20. Mute Right sound channel audio input (grey
Power point
9. Stop: Stop the playing disc. 21. Mode switch DVD, GPS, AV switch line red head)
Left sound channel audio input grey line TV antenna interface
10. Image adjustment menu: brightness, PS: If the remote control distance is not far or white head
contrast, chroma selection not effect, please replace the battery.(using Video output black line yellow head Remark Power wiring on the "blue" line
11. Play/Pause 3V CR2025 battery ) PS: Please insert follow the label. to reversing control wiring.
3 4
Generated by Foxit PDF Creator © Foxit Software
Wiring diagram http://www.foxitsoftware.com For evaluation only. Basic Operation
5.Basic Operation
Wiring diagram Please insert the plug into the CDC’s plug directly Main menu operation
Power On/Off
Power Wiring
Press “POWER” or “instructure key” under the power off status, the system open instructure
firstly, then power on secondly; If power off,please press “POWER” key,then the system close
instructure firstly, then close the system.
Note: Turn on the system and press “CD” key in the original car, let sound shift to the system
to input.Re-press “CD” key in the original car could shift to original car speaker.
Unplugged "map card" to open the machine need to "Calibration" Touch Panel,then enter to
the main interface to use the machine; when the touch screen disallow or invalid, you can
remove the "map card" then re-boot Touch Panel Calibration. Click the cross cursor of Touch
Panel to do calibration, and follow the cross cursor and click : screen center →top left corner
Original car audio CDC plug
→bottom left corner →top right corner→bottom right corner →OK to complete)
Blue line connect to CCD Control
Using the system after enter to the main interface,
Figure:
Fig4 Local wiring connections with the body
Click into to the bluetooth status Click into the GPS navigation status
Put two wires into slot, in case pressure
wire bad.
Click into the DVB-T status Click into the DVD status
Fig5 Place wires when installing
Note :For 03-05 models, need to shorted down "L716" component in the original car CD Click into the AV status
machine.
5 6
Generated by Foxit PDF Creator © Foxit Software
Basic Operation http://www.foxitsoftware.com For evaluation only. Basic Operation
Enter into safety driving mode: DVD Operatetion:
It can play music and navigate if press “close structure”key under the status of system Press “DVD”icon or “MODE” button shift to DVD mode.
opened and the system will close the structure, there is no effect on driver Click screen to operate normal funtions then click “back” icon backing to the menu.
Navigator Operatetion:
Click on the screen the "earth" icon to switch to "navigation mode",operate the navigator by
touch screen; concrete methodes refer to > please;
Press"NAVI” button return to the main interface or before the work of state; implementation
of navigation while watching DVD or TV.
Bluetooth Operatetion:
Click “Bluetooth” icon or press “MODE” button shift to bluetooth mode.
Number Display
Dial or STOP Play/Pause LAST In/out Back to
receive calls menu
Back
NEXT
Hang up Replace Disc: Press “in/out” and eject disc,automatic load disc when imbed
Play Disc Press “play/stop” to play or stop playing disc.
Match Connect,disconnect Dial-up
Clear numbers Selection Press “Last” or “Next” to select program or use remote controler to press the
(after the green,
number select program directly.
connection OK)
FF*REW Press “Last” or “Next” until two seconds,or use remote-controler press the FF*REW
(double,4-fold,8-fold,16-fold).
Please matching with mobile phone before used: first,open the bluetooth of mobile phone, Language switching: Press “L/R”key can shift (playing VCD shift L/R channels, only
then click on the "match"; and then search bluetooth device, Received "Carkit" Choose connect, multi-language DVD can shift language)
enter the password "0000" after successful,selection online; then ok to make and receive calls, Select DVD/USB/SD Inserting “DVD USB SD”, press “GOTO”on the remote controler firstly,
also can play music through the machine. then press direction key to select “DVD USB SD”to playing.
Online mobile phone to leave the machine after the effective distance (8 meters) will be Time playing Press“OSD”key , then popup menu and press Direct,Number key to select part
automatically disconnected, go to the effective distance will be automatically connected; click on and key into time. Then press Enter key to play as relevant time.
the "disconnect" icon to disconnect. Select Subtitle Press “SUBTITLE” key of remote-controler can switch subtitles when
With another mobile phone connected, first click on the "Disconnect", then click on the playing multilayer letter DVD.
"match" (Ways ibid.) Repeat Play Press“RPT”key can select Einzeilig Musik wiederholen,all wiederholen,cancel
wiederholen.
7 8
Generated by Foxit PDF Creator © Foxit Software
Basic Operation http://www.foxitsoftware.com For evaluation only. Basic Operation
AV Function Operation
Menu Play Press “MENU/PBC”key can display disc’s repertoires menu of all when playing
When connecting between outer audio &video signal and unit well, please “AV” icon or
VCD2.0 disc, also can coordinate with number key and direction key to select
repertoires.Playing DVD and press “MENU/PBC” key can back main menu,press direction key press”MODE” key to shift outer audio &video.
can select snatches and press “OK” for playing.
Title play If play DVD with title, please press TITLE key to reback the top menu of the disc.
Select chapter or title by press direction key, then press ENTER is ok.
Setting DVD System function In DVD mode ,when press remote controler’s “SETUP”key,the
screen will popup system set menu
Language Back to menu
Video
Unit’s audio &video output can connect external TFT-LCD and amplifier. click bottom right
Audio
corner “back” icon backing to the menu.
Rating Reverse Function Operation (Exclude camera)
Connect unit’s “Reverse Control wire” to “Reverse Gear Switch’s output”,”Reverse CCD
Misc
camera’s video signal” connect with unit’s “ Reverse Video Input”.It will auto-open when
reverse,then screen will display the image taked by reverse CCD camera,after finishing reverse
l Use direction key to select items as you need and press“ENTER”for confirmation,press
the machine will Auto recover.
“SETUP”key again can quit system set menu.
Language setting: Set the screen, letters, DIVX letters, menu language
Video Settings: Set the display ratio,system,image quality
Audio settings: set up bass, front, center, surround output
Classification settings: Set the video content of the Level
Other settings: Set the screen saver switch, power switch and memory, restored to original
state.
By adjusting the "image adjust" function of "the level of the mirror switch" can be put
forward, or mirror images; after reversing automatically return to the original model.
9 10
Generated by Foxit PDF Creator © Foxit Software
Basic Operation http://www.foxitsoftware.com For evaluation only. Basic Operation
Image adjust
At DVD or AV state press remote control "MENU" key to enter the "image adjust, function Function menu Click on the screen "menu" enter the function settings.
settings, preset" menu; can adjust (brightness, contrast, color, language, reversing mirror, blue
switch, sleep, time shutdown) function; press CH +, CH-button to select the function; press VOL
+, VOL-key to adjust value.
TV function operation (select function), Please attach the antenna before used.
Click "DVB-T"icon or press "mode switch" button, switch to TV function.
For first use or transfer the region,please use the automatic search,click "menu" icon, pop-up
menu and click "CH + or CH-" icon select "Install", then click "OK" icon , and then select
"Automatic Search", after the completion please click "OK" save and return to normal viewing;
Preset menu System menu Channel list Parameter selection
press "back” icon return to the main menu.
Click "OK" button to enter, press "CH +, CH-" button to select, press "EXIT" key to exit.
Info column
Installation: Choose the location, Automatic search, Manual search, Restore default settings
Menu CH- CH+ Exit Back to
Automatic Search: Automatically search TV program, when the search is completed,
menu
click"OK" save and return to normal watch (Recommended).
OK Manual Search: manually select channels and frequencies.
Note: The signal quality (yellow shown) must be more than 30% at normal viewing.
Click "OK" button to enter, press "CH +, CH-" button to select, press "EXIT" key to exit.
11 12
Generated by Foxit PDF Creator © Foxit Software
Basic Operation http://www.foxitsoftware.com For evaluation only. Specifications
Parameter Selection 6. Specifications
Type SH-DV7621
Head cover color Black & beige
Operate Touch panel button remote control
Resolution 1440×234
Display 6.2 inches 16 9 4 3
System PAL/NTSC
DVD signal system PAL/NTSC
Language settings: to set up the menu language, audio language (to show how language can
DVD frequency response 10Hz~20,000KHz
be set), subtitle language (to show how subtitles language can be set).
DVD quiver Less than limit value
AV Control: Set the audio channel output, display ratio , display format
Distortion 0.1%
Other settings: set display time information, menu transparence, menu color
Working temperature -10 65
Voltage 10.5 14.5V
System: Show system edition information and testing the current station of the radio signal
strength and signal quality Standby current 6.5mA
Disc playing format DVD/MP4/SVCD/VCD/CD/CD-RW/MP3 etc
Maximum operating current 1500mA
GPS system Microsoft Windows CE 5.0
1 video input 1 astern video input 1 video input
External interface
L/R audio input 4 audio output SD, USB interface
Channel list: View the current channel number information
Single volume 300mm×245mm×160mm
Click "OK" button to enter, press "CH +, CH-" button to select, press "EXIT" key to exit. Single weight 1.8Kg
NOTE Specifications and the design are subject to possible modifications without notice
due to improvements.
13 14
Generated by Foxit PDF Creator © Foxit Software
Map matching http://www.foxitsoftware.com For evaluation only.
7.Map matching
Map software and the system does not match will result in abnormal operation of functional
chaos, operation error, no signal of such a phenomenon, please click the following requirements
of the map with the correct software.
Form factor PND
Operating system
(OS type and languages Wince.Net 5.0
supported)
Processor SamSung ARM920T S3C2440A 400MHz
Screen
480*234, 16bit
(dimensions in pixels, colors)
64M Nand Flash;
Memory
64M SDRAM;
(internal memory, storage)
SD Card (support 256M/512M/1G/2G)
Hardware buttons
(describe hardware buttons and
their expected functions within
No buttons
Navigate 7,
include API and technical
documentation)
Pinyin IME 2.0
(for the Chinese market, the device
should have a ROM with
Microsoft Pinyin IME 2.0 included
and Pocket IME Exclude)
Name navigation application: PND(Software can be
Installation path
configured)
and expected application
Folder to put navigation appl.: PND(Software can be
name
configured)
SDK available SH_101_SDK.msi
Shell application
How to access GPS serial COM1, Baud Rate : 9600,
data
15You can also read
