Commercial Hardware Range 2021 - milesnelson.co.nz
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Warranty Information YEAR MILES NELSON WARRANTY Products covered: Miles Nelson Commercial Door Furniture, Commercial Door Closers, and Narrow Style 2000 Series Mortice Locks. These products are warranted to be free from workmanship defects for 10 years from the original date of purchase. If a defect is detected simply return the product together with proof of purchase to the supplier for replacement. Products are designed for interior residential applications, unless otherwise stated. Over time the surface may deteriorate if exposed to adverse atmospheric conditions caused by sea, air and weather. Finish deterioration caused by exposure to adverse atmospheric conditions or occurring from the use of ammoniated detergents, metal polishes, solvents, corrosive environments or other abrasive agents or scratching from keys is not considered a defect in the finish and as such is not covered by the warranty. Likewise, the warranty does not cover damage caused by incorrect installation, accident, neglect or other factors over which Miles Nelson have no control and as such Miles Nelson shall not be held liable for any losses or expenses such as loss of use, damage to property or consequential damages or expenses. Products covered: All 5000 Series Mortice Locks. Miles Nelson Manufacturing Ltd guarantees its products against defects in workmanship and materials. Should the product develop fault within its normal working life, Miles Nelson will repair or replace product of the same or equivalent product free of charge. Miles Nelson Manufacturing Ltd assumes no liability under this guarantee for the following. 1. Incorrect installation or failure to follow instructions. 2. Failure through improper maintenance or fair wear and tear. 3. Loss or damage costs incurred either indirect or consequential. 4. Cost of removal, replacement, and/or travelling time. 5. Any modification to the product from its original supplied operation design. 6. Plated finishes deterioration under some climatic conditions or chemical environment are exempt from this guarantee. Miles Nelson Manufacturing Ltd reserves the right to determine whether or not any fault is caused by defects in workmanship or that any product is defective. Product specification and design improvement may change as a result of our continued commitment to quality, materials and development program. Consumer Guarantees act does not apply. For Orders: P: 0800 663 5766 Finishes and Terminology F: +64 9 489 5552 E: orders@milesnelson.co.nz SS Stainless Steel Overnight courier service available on request. SC Satin Chrome For Technical Enquiries: P: 0800 663 533 E: commercial@milesnelson.co.nz PO Box: 31 043 | Milford, Auckland
Contents Miles Nelson® offers a comprehensive range of commercial architectural hardware products: 04 06 10 Introducing MNC Mortice MNC Door MNC5000 Locks and Furniture series Mortice Accessories Locks 13 14 18 MNC Door MNC Lock MNC Lock Closers and Furniture Specification Kits by function How to use this brochure • The colour coded contents on this page will direct you with the book divided into a MNC product guide followed by a MNC specification section, then other MNC hardware. • The ‘Lock Specification by function’ section starts with a quick reference guide to the different lock functions. Please note that the codes in this section refer to a locks function and should not be used for ordering product. The next pages in the specifying section give more detailed information on lock function. The specifying section finishes with a cam and snib matrix. Pages 6-16 onwards contain all product information and product ordering codes. • Product finishes are designated by icons with a guide on opposite page. Miles Nelson Service Guarantee • Our people are great from our account representation to our customer service team and support staff. We make sure that we are easy to deal with and always go the extra mile to help. • We have a technical support dedicated hotline to deal with any enquiries on a technical level (see opposite page for contact details). • Difot, our ‘delivery in full, on time’ rate is among the highest in country, so we always aim to have sufficient stock on hand. • NZ owned and operated with a rich history dating back 90 years, Miles Nelson always listens to the customer, and values their feedback as we continually aim to improve our product offering.
The MNC5000 Series Mortice Locks by Miles Nelson® The 5000 series locks have been engineered for strength, precision, and durability using the highest quality components inside a high purity zinc alloy pressure cast lock body. Your confidence will be reassured knowing that the MNC5000 has been tested beyond 250,000 cycles, and successfully passed the fire endurance tests as specified on the following page. It is also backed up with a 25 year warranty. 4
Testing Information Fire Rating The MNC5000 Mortice lock has been successfully tested for endurance within fire door assemblies for up to 120 minutes on E-Core doorsets and 60 minutes on Pyropanel doorsets. Testing was conducted in accordance with Australian Standards AS1530.4-2014. The MNC5000 lockset did not initiate failure for the duration of the tests. A fire resistance assessment report has also been issued for the MNC5000 Mortice lock for usage on timber fire doors. The report states that the MNC5000 is suitable for use on 30 and 60 minute timber fire doors. Please refer to the fire symbol throughout this catalogue for fire door application door hardware. For more information on fire ratings, please contact your Miles Nelson® representative or check door manufacturers approved lists. Exova Warringtonfire Aus Pty Ltd T: +61 (0)3 9767 1000 Unit 2, 409-411 Hammond Road W: www.exova.com Dandenong, Victoria 3175 Australia Postal Address: Test ass PO Box 4282 Dandenong South, Victoria 3164 Exo Test spon essment va Wa rringtonf Australia sors Unit 2, ire Aus 409-411 Danden Hammon Pty Ltd report 9767 1000 ong, Vict d T: +61 T: +61 (0)3 va.com oria 317 Road Ltd .exo Hardware Australi a 5 W: www (0)3 976 7 1000 ringtonfir e Aus Pty d W: www sponsors Postal .exova.c om Exova War 411 Ham mond Roa Pyropanel Address Unit 2, 409- Victoria 3175 Developme 4282 Repo PO Box : Dandeno ng, Ltd nts Pty Danden rt issue da Australia DHAR Test Assessment No. DHAR FRT 180343a.2 Page 1 of 3 Miles Nelso Australi a ong Sou th, Vict oria 316 te Test asse 7 1000 235 Hunti Hardware n Architectural ss report no ment 4 (0)3 976 Ltd T: +61al Address: Post .exova.c om ngdale Ro 6 January . tonfire Aus Pty W: www PO Box 4282 h, Victoria 3164 Test Sponsors 3 Issue Date Oakleigh ad 2020 Warring d Road ng Sout ge 1 of 5 Lovell Co Exova 409-411 Hammon Dandeno a.2 Pa VIC 3166 urt Alban DHAR FR T 180343 Parasole 5 Unit 2, oria 317 Australia Danden ong, Vict DHAR FR Australia Auckland y, T190391b Australi a 1302/12 Date Glen Issue Street 21/01/2019 DHAR .1 sment No . New Zeala ReportTeva st Asse of 3 lidityssda : Address st Asses ment No Postal 4282 oria 316 4 DHAR Te Page 1 Milsons Point, NSW 9 2061 nd te . PO Box th, Vict 43a.2 21/01/201 Validity Date 6 January Test Sp ong Sou onsors T 1803 Danden Australi a Test Sp DHAR FR Date and Table 1 2025 on sors DH AR FR Parasole Issue ity Date Pty Ltd Amendm Parasole T 1803 nt No. E Plus Building ValidProducts ent sche 43a.2 ssme 2 Glen Str eet 19 dule 1302/12 Glen St Page 1 of 3 Te st Asse 130 2/1 NSW 206 1 21/01/20 85-89 Tulip Street 21/11/2023 Version Milsons reet Issue DHAR s Po int, Da te Point, Date onsors Milson Cheltenham 21/11/VIC 3 2023192 Inf NSW 20 Test Sp and Da te R1.0 orm ation abou E Plus an d 61 Parasole ducts Pty Ltd Validity 6 t rep Building 21/01/20 t ree Plus Buildi ng Pro Ja nu ary ort Produc 19 Glen St E lip Street The Fire Resistance Performance of E+ Doorsets with the nominated 2020 Description 85-89 ts Pty Ltd 1302/12 NSW 20 61 85-89 Tu 23 nated Tulip St Validity Point, m VIC 319 2 21/11/20 the nomi variation to the Door Lockset Initial issue Chelten reet Date Milsons Cheltenha ets with ham VI C 3192 and E+ Doors Pty Ltd ance of or Lockset Prepared The Fir Pr oducts ce Perform Do Variations Considered in this Report by e Build ing e Resis tan to the Na me Re sis 21/11/20 E Plus t lip Stree The Fir variation mi na ted Re po rt doo r lockse t Reviewed tance Perform 23 85-89 Tu Fittingth thae MNC5000 no red in thi s Mortice Lockset f in lieu &ofOval Key 570 Cylinder into the door leaf in lieu of the door lockset the Sumathi Gu by varia ance of C 3192 wi door lea Signature tionAu Fitting rusamy Conside E+ Do ham VI sets tested in the referenced to tho the ris Chelten E+ Va ortio Doria ns t er into the tests. a Patrick Ch Doed byorsets with th ance of or Lockse 570 Cylind tested MNC5000 Mo anVariatio or Lo ckset e nomi Perform theLoc Dokset & Oval Key kset in the ref rtic ns Co Pa nated tance riation to door loc erenced e Lockset nstric idek reCh e Resis Mortice port of the Referenced & Oval d inan The Fir a va MNC5000 nced tests.red in this Re f in lieu rts Sta ndard Test Reports tests. Key 57 this Re Fitt ing the refere Conside o the Test lea door Test Repo ced Report Te st Doorset Description Test Standard Objective 0 Cylinde r into the port tested in Variations lin de r int Re fer en 97 y 570 Cy scription 1530.4-19 AS Plywood Test Re po door lea f in lieu AS 1530.4-1997 To assess the al Ke et De et Single leaf faced E-core Doorset rt ckset & Ov Doors FSV 0609 ore Doors dard Referen of the door loc rtice Lo faced E-c an nominally 85 -1945mm thick fire res FSV 06 ced Te kset f Plywood 45mm thickTest St et AS 1530.4 variation to the door istance performan 000 Mo port 09 Doorse st Repo ts. Releaports a MNC5 erenced tes Test Re Sinstgle nominallySI 2271 E-core Do ors Two Leaf Plywood faced E-core Doorset 97 Single t Desc rts Fitting ced Te 30.4-19 AS 1530.4-1985 lockset. ce of a Py leaf Ply ription in the ref Referen ription f Plywoet od faced thicAS k 15 ropanSI wood fac tested FSV 060 9 t Desc Two Lea orsinally 45m m nominally 45mm thick Va el 22FR71 Bo ard Two Le nominally 45 ed E-co Doorse ed E- co re Do nom 30.4- 15ta 19 85 Test Sta nd ard ria tions cons Mini doors Plywood af mm thick re Doors et Te st Stan SI 227 1 wood fac ck et al Supporting ASDa ration Additional Supporting idered in etmiwith fac the dard leaf Ply nally 45mm thi re Dodit Test Du -2014 Data this repor no ed E-co no rena mm thi mi port orsion Fitting a MN nally 45 AS 1530 Test Re Single nomi ed E-co AdTest Reference AS 1530.4 t Test Re Dotedorset .4-1997 od fac ck et Description 120 min Doorset utes Description on a Test Duration Test Standard C5000 Mo ference ck 09 af Plywo mmDo thiors E-core dard conducted rtice dead EW FA Addition FSV 06 Two Le nominally 45 od faced st Stan Leaf Plywood TeSingle 14 was faced E-core y 570 lat ch FRT 18 Doorse al Supp AS 1530 fer en ce Single Lea f ting Ply EWFADa wota FRT lly 46m ratiom180343 thic nk. AS 153 0.4 :20 Ov al 14 kset & 46mm thick. Ke 120 minutes AS 1530.4-2014 ins tead of the 03 43 Sin gle Le t De sc riptio orting Data .4-1985 Test Re Supporet nominaTest Du Appendix B1AS Doorset 1 of15 30.4-20nominally plate A pilot do SI 2271 Mortice Loc e square pilot do or scale locfire ks Doorset af Plywood fac n ditional Donors Ad343 e with firetesresistance C5000test inhite a larg with Appendix B11 of AS 1530.4:2014 was conducted Taonble resetist tes Test Du EW FA FR T 180 A ord ancscale pilot ed a MN Vivid onral ctu accordance a 2 Cylinde orset on the ance ted nomina tes in the ref ed lly 46mm E-core scrip tio t in acc tesE-core 8. It12inc 0 miludnu Arc ted – was conduc y 570 Reference 23 Oc t in accorda ere thi . ration nce wi ncedcktes Deista setres Doleorfire nceed er pilot 201 doorset A Haon rdware .4:the 201423 October Ke 2018. It included a MNC5000 Mortice Lockset & Oval Key 570 d test rep rfit escutch ted into t. 120 minutes Test St A pilot scaLeaf od facOc tobck thilea.fCylinderfitted with JM & Oval re plate orts the do tober 2018 andard ce t Plywo on the 23 46 mm r of AS 1530 into ck set door the leaf ua with JMA Hardware – Vivid Architectural large square plate Te eons wi th or lea . It inc th Appendix fer en gle rse t doo et nointo piloSin lly mina the doo ix B1 1 e Lo ge sq st LF 4000 #9 f with lud B1 1 AS 1530 Test Re ors d Ap. pend escutcheons 00 0 Mortic with ral lar#90. LF4000 ctu Do ors 0. JMA ed a MNC5 of AS 1530.4: .4-2014 0343 Cylind Do erf itte LFnc400e 0 wi th #90 C5 a MN Vivid Ar ch ite ref erence et descrip Ha rdware 00 0 2014 FRT 18 heo t inns coh acwit rda inc luded – tion – Viv Mortice Lock was conduc EW FA escceutc tes 18. It rdw are id Archite set & ted on resistan October 20 th JMA Ha FR 3262 ctural Ov a scale fire 23 f wi TESTING large al Key 570 A pilot orset on the or lea e Aus Pty Ltd 4 Single lea square the do 0. VIC 316 AUTHOR pilot do ted into Exova Wa rringtonfir G SOUTH ENONG VIC 3175 FR 1618 f Pyropan Addre ITY Test stand plate rfit 4000 #9 NDENON DAND el FR Min ss ard Cylinde ns with LF PO Box 4282 DA nd Road Single lea i doorset, cu tch eo THO RITY TESTING AUTHORITY -41 1 Hammo Exova Warringtonfire Aus Pty Ltd f Py ropanel FR Ph on no mi na lly 38mm Exova es TESTIN G AU Unit 2, 409 0 FR 1645 Maxi doorsABN e thick. PO Bo Wa rringto nfire Au Address Pty Ltd 9767 100 64 PO Box 4282 DANDENONG SOUTH VIC 3164 Pair leaf Py ASUn15 x 4282 s Pty Ltd s e Aus 61 (0)3UTH VIC 31 75 et, nomina Addres gtonfir VIC 31 ropanel FR it 2,3040.4: 19DAND 97 ENONG SOUT Warrin G SO 241 524 ONG Em lly iewed2,By: Maxi doors Autho / Home Page 48mm thick. ail RevUnit 409-411 Hammond Road DANDENONG VIC 3175 ENON81 050 NDEN 9-411 Exova DAND x 4282 Phone ondww Road DA w.exova.co m Table 3 61 (0)3 AS8115 Hamm ond Ro H VIC Phone PO Bo Hamm 61 (0)3 9767 1000 Addition et, noris miati 05030 9767 10 ad DA 3164 na 24.4: on 00 1 5219 NDEN THOR ITY it 2, 40 9-411 pared By: al su pp lly 48mm 90 ONG TESTING AU AB N e Un 9767 10 ABN 00 Pre 81 050 241 524 orting inf thi ck. www.e 4 VIC 31 75 Home Pag 61 (0)3 ormation ASPre15 xova.c Email / d By: Test report 30.4: om By: 1990 ss 241 52 Email 4 / Home Page www.exova.com Addre tion 81 050 Reviewe pared Authorisa om ww w.exov a.cAuthorisation Prepared By: Reviewed By: FRT19039 orset desc Do Phone Prepared By: n 1 ription Reviewe d Patrick Cha By: ABN Page Single lea Email / Home f Pyropan Test durat ome nominally el ion Te Autho risation Pius Jer A pilot sca le 38 mm thic FR Mini doorset, st standard Chan scale doors fire resistance tes k. 60 minutes Pius Jer Patrick om et on the t in AS 15e30.4: 10 Decemb accordance with 9 Pty Ltd 201 2014 nfire Aus Appendix Pius Jer ome © Exova Warringto Pius Jerome Patrick Chan er 2019. It B11 of AS Patrick included 1530.4:©20 Chan a MNC500 Exova 0 Mortice 14 Warrin dead latch was confir gto Pty Ltd 2019 nde uc Austed on20a19 Pty Ltd fitted into Warrin gtonfir e Aus the door lea pilot © Exova © Exova Warringtonfire Aus Pty Ltd 2019 f. 5
MNC5000 Series Wide Style Mortice Locks MNC5000 SS MNC5000ND SS MNC5409 SS 60mm Backset Mortice Lock 60mm Backset Mortice Lock 60mm Backset Mortice • 88mm case depth (No Hub Disc) Passage Latch • 8mm spindle hub, Spindle supplied • Use with through spindle handle escutcheons • 8mm spindle hub • Suits up to 55mm thick door • 8mm open spindle hub • Lever retracts latch at 33º • See page 22 for overall dimensions • Lever retracts latch at 33º • Non locking / no deadlatch • 41mm centre to centre rose fixings • No locking bar • 51mm centre to centre diagonal fixings • Lever retracts latch at 33º MNC5100 SS MNC5300 SS MNC5000RK SS 60mm Backset Mortice 60mm Backset Mortice Latchbolt Rebate Kit Deadbolt Sliding Door Deadbolt • For 5000, 5409 and 5000ND • Zinc diecast body / stainless bolt • Zinc diecast body / stainless bolt • See page 29 for dimensions • See page 23 for dimensions • See page 26 for dimensions 47mm 59mm 32mm 45mm MNC5000-02 (Standard) SS MNC5100-02 SS MNC5100RK SS MNC5000-03 (Extended) Deadbolt/Sliding Lock Strike Deadbolt Rebate Kit Strike Plate • For 5100 and 5300 • For 5100 • For 5000 and 2200 • See page 29 for dimensions • See page 29 for dimensions • See page 29 for dimensions 6
MNC2000 Series Narrow Style Mortice Locks MNC2200 SS MNC2200EP SS MNC2200/SFP SC (Short Face Plate) 23mm Backset Mortice 28mm Backset Special MNC2200/LFP SS Deadlatch Mortice Latch (Long Face Plate) • 8mm spindle hub • Adjustable 28-29mm backset Face Plates • Lever retracts latch at 45º • Short case depth 39mm • Comes with long faceplate • For 2200 range • 8mm through spindle • Includes turnadaptor • Short face plate 155mmH x 25mmW • Lever retracts latch at 33º • See page 24 for dimensions • Long face plate 254mmH x 25mmW • Suits card access handle escutcheons • Non-locking lock body • Comes with long faceplate MNC2200E SS 28mm Backset Mortice Deadlatch • Lever retracts latch at 33º • 8mm spindle hub • Comes with long faceplate • Includes turnadaptor • See page 22 for dimensions MNC2100L (Long throw) MNC2300 SS SS MNC2100S (Short throw) Mortice Hook Bolt Mortice Deadbolt • 28mm bolt projection with 21mm hook reach • 22mm Backset • Long throw 34mm bolt projection • Includes short and long faceplates, escutcheons and strike • Short throw 21mm bolt projection • Includes 2 x cams but order key cylinders (MNC570RE) • Backset 22mm and turns (MNC590CT) separately (see page 9) • Includes short and long faceplates, escutcheons and strike • See page 26 for dimensions • Includes 2 x cams but order key cylinders (MNC570RE) and turns (MNC590CT) separately (see page 9) • See page 23 for dimensions 7
MNC Mortice Lock Accessories Kick Off (KO) Adaptors (Anti-lockout) Kick off (KO) function adds a feature to the lock that makes it unable to be locked when the door is in the opened position. Kick off is available on any lock that incorporates an MLAAD5200-01 Kick Off adaptor AND a MNCK2CAM cam. See page 18 for handling guide. MNCK2CAM MNCAD5200-02RH MNCAD5200-02LH Turn Snib Adaptors Refer to pages 30 and 31, cam and snib matrix for door function. MNCAD5000-01LH MNCAD5000-01RH MNCAD5200-01 MNCAD5100-01 Special Classroom Special Classroom Common Butterfly Deadlock Sliding Adaptor Adaptor Adaptor Lock Adaptor • Left hand (See page 18) • Right hand (See page 18) • Common turn adaptor • Use with 5100 and 5300 • For night latch and special • F or night latch and special • Use with 5000 and 2200, locks classroom functions classroom functions 2200E locks • Use with cam to unlock door •U se with cam to unlock door and also retract latch and also retract latch • For full explanation see • F or full explanation see 5208PWD on page 25 5208PWD on page 25 • W2CAM must be fitted upside • W2CAM must be fitted upside down when turnsnib is used down when turnsnib is used Oval Cylinder Cams Refer to pages 30 and 31, Cam and Snib Matrix for door function. MNCW2CAM MNCX2CAM MNCY2CAM MNCZ2CAM MNCXZCAM MNCRECAM • Use with turnsnib • Use for latch • Use with 5100 • Use to lock and • Comes as pair for • Use with 2100 retraction only and 5300 unlock handles courtroom function and 2300 deadbolts with oval key or (page 28) deadbolts turn cylinder 8
Oval Cylinders MNC570 MNC570E MNC570SB MNC570KA (Keyed alike) SC MNC570EKA (Keyed alike) SC Oval Key Cylinder Oval Key Cylinder Extended Oval Key Cylinder • Satin Brass finish • Keyed alike in batches • Cylinder is 34mm overall • Cylinder is 41mm overall • Great for construction cylinders • Includes 2 keys (C4 profile) • Suits 55 - 60mm thick door • Compatible with security profile plugs • Includes 2 keys (C4 profile) • Comes with MNCZ2CAM • Compatible with security profile plugs • Suits up to 53mm thick door • Comes with MNCZ2CAM MNC570HBLH (Left hand) MNC590CT MNC590CLT MNC570HBRH (Right hand) Oval Thumb-Turn SC Large Oval Thumb-Turn SC Oval Hold Back •C omes with MNCRECAM for use • Special cam, only for use with 2100 with 2100 and 2300 locks and 2300 locks • Includes 2 keys (C4 profile) and cam • Grub screw to change handing • Available in left or right hand (see page 18) • Reversible handing • Allows the latchbolt to be held in the opened position and the key removed Oval Cylinder Ordering Guide MNC570 comes with Z2 cam MNC570W2 use with turn snib MNCKBC45PIN MNC570X2 use for latch retraction only MNC590E MNCKBC46PIN MNC570Y2 use with 5100 and 5300 bolt locks Oval Cylinder Key Blank MNC570RE use with 2100 and 2300 bolt locks Escutcheon Pair SC •C hrome plate brass Add ‘KA’ to end of product code for keyed alike. • Use with 2100 and 2300 key blanks locks Refer to cam matrix on pages 30-31. • 5 and 6 pin C4 profile 9
MNC Door Furniture Wide Long Plate (Satin Chrome on Brass) 39.75mm Quick Handing Change Design 8mm Door Handle Specifications: 7.6mm Base MNCSPINDLE Length: 175mm Width: 48mm • Stepped 7.6 to 8mm spindle Depth: 11.5mm • Suits all MNC locks and furniture on doors up to 60mm thick Screwfix CTC: 158mm • Supplied as a pair with springs Screw: M4 • Included with MNC5000 and MNC2200 locks Spindle: 7.6mm Material: Brass Warranty: 10 year mechanical MNC150SCREW • 80mm M4 SS screw (pair) • Suits up to 65mm door • Use with wide and narrow long plate furniture • Break off sections MNC151/90 SC MNC155/90 SC MNC101 SC External with Lever External with Lever – External with Cylinder and Cylinder Hole no Cylinder Hole Hole – no Lever MNC105 SC MNC153I/90 SC MNC152/90 SC External – no Lever or External with Lever and Internal with Lever Cylinder Hole Indicator and Release and Cylinder Hole 10
MNC156/90 SC MNC154/90 SC MNC154CLTLH/90 (Left hand) SC Internal with Lever – Internal with Lever MNC154CLTRH/90 (Right hand) no Cylinder Hole and Turn Internal with lever and large turn Note: Image shown is left hand Round Rose and Accessories 118 Ø15 MNCR53SCREW MNCR53B SC MNCR53TS SC 51 36 10 Screw Round Rose Blank Turn Snib 53 • 80mm M4SS (pair) • Fixings included for back • Fixings included for back MNCR53/90 SC • Suits up to 65mm door to back and face fixing to back and face fixing • Use with R53 Rose • For back to back fixing • For back to back fixing 53mm Round Rose Lever Pair Levers and accessories use with MNCR53CE use with MNCR53CE • Satin Chrome on brass lever • Break off sections / MNCR53ER / • Screw on cover • Screw on cover MNCR53ERIND • Screw fixing centre to centre 41mm • Screw on cover • Takes 7.6mm spindle MNCR53TSDA SC MNCR53ERIND SC MNCR53ER SC MNCR53CE SC Large Turn Snib Emergency Release Emergency Release Oval Cylinder • Fixings included for back to (Indicating) (Non-Indicating) Escutcheon back and face fixing • F ixings included for back to • Fixings included for back to • Fixings included for back to • For back to back fixing back and face fixing back and face fixing back and face fixing use with MNCR53CE / • F or back to back fixing • For back to back fixing • For back to back fixing MNCR53ER / MNCR53ERIND use with MNCR53TS or use with MNCR53TS or use with MNCR53B or • Screw on cover MNCR53TSDA MNCR53TSDA MNCR53TS or MNCR53TSDA • Screw on cover • Screw on cover • Screw on cover 11
MNC Door Furniture Narrow Style (Satin Chrome on brass) Door Handle Specifications: Base Length: 185mm Width: 26mm Depth: 12.5mm Screwfix CTC: 159mm Spindle: 7.6mm Screw: M4 Material: Brass MNC151N/90 SC MNC155N/90 SC Warranty: 10 year mechanical External with Lever External with Lever – and Cylinder Hole no Cylinder Hole MNC101N SC MNC105N SC MNC152N/90 SC External no Lever External no Lever – Internal with Lever and Cylinder Hole no Cylinder Hole and Cylinder Hole MNC156N/90 SC MNC154N/90 SC Internal with Lever – Internal with Lever no Cylinder Hole and Turn 12
MNC Door Closers The hydraulic 8000 series door closers are an aluminium body with a silver finish and have a 10 year warranty. Products on this page with the fire icon have been tested on a range of timber and mineral core approved fire doors. Contact Miles Nelson for more information or check door manufacturers approved lists. MNC8404BC/DA SC MNC8626BC/DA SC MNCD002 SS EN3 – 4 Closer EN2 – 6 Closer (adjustable) Door Selector • Adjustable back check/delay action function • Adjustable back check/delay action function • For double doors • Includes parallel fixing bracket • Includes parallel fixing bracket • Allow self latching doors to close • Adjustable closing and latching speeds • Adjustable closing and latching speeds in correct sequence • Magnetic trim cover (MNC8404CP) • Magnetic trim cover (MNC8626CP) • Fixings included MNC8000DP SC Drop Plate • Suits 8404 and 8626 MNC8404SA SC • Fixings included MNC8626SA MNC8404HO SC MNC8626HO Slide Arm Kit • MNC8404SA suits MNC8404BC/DA Hold Open Arm • MNC8626SA suits MNC8626BC/DA • Removable hold open feature • MNC8404HO suits MNC8040BC/DA MNC8000ZB SC • MNC8626HO suits MNC8626BC/DA • Use of slide arm reduces closer power by 30% • Ball joint for positive hold open Z Bracket • Fixings included • Suits 8404 and 8626 • Fixings included Dimension Hole Spacing Applicable Applicable (mm) (mm) Power Model door weight door width Size A B C D E (kg) (mm) MNC8404BC/DA 207 55 40 50 39 60 – 85 930 – 1100 3-4 2-6 MNC8626BC/DA 236 61 43 50 45 25 – 150 800 – 1400 Adjustable 13
MNC Door Hardware Trade Kits • All kits are supplied with a fire rated mortice lock and forged brass door handles suitable for commercial and residential applications • 25 year mechanical warranty on commercial mortice lock / 10 year warranty on handles • Includes installation template and setup instructions • Suitable for retro fitting and new installations Trade Box Kits Kit products are sent in a non-sealed single outer box, designed to help door by door supply. Product Code Description Components Products MNCKITWL90CL/ST Mortice Lock: MNC5000 (Without cylinder) Classroom / Lever: MNC151/90 MNCKITWL90CL/ST – CYL Storeroom Kit Lever: MNC156/90 (With cylinder) Cylinder: MNC570 optional MNCKITWL90OF Mortice Lock: MNC5000 (Without cylinder) Lever: MNC151/90 Office Kit Lever: MNC154/90 MNCKITWL90OF – CYL Snib Adaptor: MNCAD5200-01 (With cylinder) Cylinder: MNC570 optional Mortice Lock: MNC5409 MNCKITWL90PS Passage Kit Lever: MNC155/90 Lever: MNC156/90 14
Product Code Description Components Products Mortice Lock: MNC5000 Lever: MNC153I/90 MNCKITWL90PR Privacy Kit Lever: MNC154/90 Snib Adaptor: MNCAD5200-01 RH Privacy Mortice Lock: MNC5000 Lever: MNC153I/90 MNCKITWL90PRDAR Disabled Lever: MNC154CLTRH/90 Access Kit Snib Adaptor: MNCAD5200-01 LH Privacy Mortice Lock: MNC5000 Lever: MNC153I/90 MNCKITWL90PRDAL Disabled Lever: MNC154CLTLH/90 Access Kit Snib Adaptor: MNCAD5200-01 MNCKITWR90CL/ST Mortice Lock: MNC5000 (Without cylinder) Classroom / Handle: MNCR53/90 Storeroom Lever: MNCR53CE MNCKITWR90CL/ST – CYL Rose Kit Cylinder: MNC570 optional (With cylinder) Mortice Lock: MNC5000 MNCKITWR90OF Handle: MNCR53/90 (Without cylinder) Rose Lever: MNCR53CE MNCKITWR90OF – CYL Office Kit Lever: MNCR53TS (With cylinder) Snib Adaptor: MNCAD5200-01 Cylinder: MNC570 optional Rose Mortice Lock: MNC5409 MNCKITWR90PS Passage Kit Handle: MNCR53/90 Mortice Lock: MNC5000 Rose Handle: MNCR53/90 MNCKITWR90PR Privacy Kit Lever: MNCR53ERIND Lever: MNCR53TS Snib Adaptor: MNCAD5200-01 Mortice Lock: MNC5000 Rose Privacy Handle: MNCR53/90 MNCKITWR90PRDA Disabled Lever: MNCR53ERIND Access Kit Lever: MNCR53TS Snib Adaptor: MNCAD5200-01 15
MNC Door Hardware Retail Kits • All kits are supplied with a fire rated mortice lock and forged brass door handles suitable for commercial and residential applications • 25 year mechanical warranty on commercial mortice lock / 10 year warranty on handles • Includes installation template and setup instructions • Suitable for retro fitting and new installations • Tamper proof seals on box suitable for retail Retail Box Kit Product Code Description Components Products Mortice Lock: MNC5000 Entrance Lock Lever: MNC151/90 MNCKITEL Kit Lever: MNC154/90 (Non-handed) Snib Adaptor: MNCAD5200-01 Key Barrel: MNC570 incl keys Mortice Lock: MNC5000 Lever: MNC151/90 Storeroom Lever: MNC156/90 MNCKITST Lock Kit Key Barrel: MNC570 incl keys (Non-handed) Cams: MNCX2CAM/MNCZ2CAM for storeroom & classroom functions Passage Set Kit Mortice Lock: MNC5409 MNCKITPS Lever: MNC155/90 (Non-handed) Lever: MNC156/90 Mortice Lock: MNC5000 Privacy Lock Lever: MNC153I/90 MNCKITPRLH Kit (Left Hand) Lever: MNC154CLTLH/90 Snib Adaptor: MNCAD5200-01 Privacy Lock Mortice Lock: MNC5000 Lever: MNC153I/90 MNCKITPRRH Kit (Right Lever: MNC154CLTRH/90 Hand) Snib Adaptor: MNCAD5200-01 16
17
MNC Lock Specification by Function How to Specify (Quick reference chart pages 20-21) How To Order Code Nominate the correct backset as required – (e.g. 5 = 60mm Backset) Nominate the correct backset as required Select the correct lock function – (e.g. 2 = Vestibule) (e.g. 5 = 60mm Backset, 6 = 95mm Backset and 7 = 127mm Backset) SelectSelect sublock the correct function function–(e.g. 2 = Vestibule) Select the correct locking requirements (e.g. 00 = Cylinder & Turnsnib) Select sub function – Select the correct locking requirements (e.g. 00 = Cylinder & Turnsnib) Specify handing of lock – This is to determine the hand of the lock (e.g. RH = Right Hand) Specify handing of Lock – This is to determine the hand of the lock (e.g. RH = Right Hand) Specify finish – (e.g. SC = Satin Chrome) Specify finish (e.g. SSS = Satin Stainless Steel) Options Cylinders – To – (e.g. NC = Noselect Cylinder,additional Leave blank ifoptions such you require as: H = Hold Back, K = Kick Off cylinder/s) Options – To select additional options such as: (e.g. RK = Rebate Kit, HB = Hold Back, KO = Kick Off) Note: When mortice locks are being ordered with cylinders: • satin stainless steel mortice locks will be supplied with satin chrome plate cylinders • polished stainless steel mortice locks will be supplied with chrome plate cylinders. DoorDoor Handing Handing In Australia doors are handed in accordance with English practice and the direction of opening is always In Newviewed Zealand from doors are handed the OUTSIDE. The closinginface accordance of the door iswith the oneBritish closingpractice against theand stopthe bead.direction of opening is always viewed from the OUTSIDE. The closing face of the door is the one closing against the stop bead. Which side of the door is the outside? Which side of the door is the outside? • the outside ofoutside • the an exterior doordoor of an exterior is the street is the street side side ororentry entry sideside • the outside of a room door is the corridor side • the outside of a room door is the corridor side • the outside ofoutside • the a cupboard or closet of a cupboard door or closet doorisis the room, the room, corridor corridor or hallorside hall side • the outside • the outside of a single communicating door is the side from which the the butt hinge are invisible when the door is closed. of a single communicating door is the side from which • the outsidebuttof double hinge arecommunicating invisible when the door door is the space between the two doors. is closed. A Right TheHand outsideSliding of doubleDoor is one which communicating door iscloses tobetween the space the right the and has the lock on the right hand edge, viewed always from the outside. two doors. Patio or Privacy locks are used on either patio or toilet doors. Operation to lock or unlock handles are either turnsnibs or outside A Rightrelease. emergency Hand Sliding Door is one which closes to the right and has the lock on the right hand edge, viewed always from the outside. Patio or Privacy locks are used on either patio or toilet doors. Operation to lock or unlock handles are either turnsnibs or outside emergency release. Open-out doors Open-In doors Right hand Left hand open out open out Right hand Left hand open in open in Outside of doors Outside of doors 18
Backset MNC5000 Series 60mm = 5 MNC2000 Series 22/23mm = 2 5 MNC2000 Series 28mm = E2 Function Nightlatch = 0 Deadlock = 1 Sub Function 1 Vestibule = 2 Outside Inside Sliding Door = 3 Cylinder Turnsnib = 00 Combination = 4 Cylinder – = 01 Cylinder Cylinder = 02 – Turnsnib = 03 Fixed Lever Cylinder – = 04 Cylinder Turnsnib = 05 02 – Cylinder = 06 Blank Lever = 07 Cylinder Blank = 08 Blank Blank = 09 Emergency Snib Turnsnib = 10 Handing Cylinder Cylinder = 22 Cylinder Cylinder = 28 RH Right Hand Left Hand = RH = LH Standard Finish Zinc Diecast Satin Chrome = Stainless steel Satin Stainless Steel = SC SS SC Lock Body Options H Hold Back Kick Off = = H K Long Throw Bolt = L Short Throw Bolt = S 19
Quick Reference Chart Nightlatches For further details see pages 22 5000 5001 5002 5003 2000 2001 2002 2003 E2000 E2001 E2002 E2003 Deadlocks For further details see pages 23 5100 5101 5102 5103 2100L 2101L 2102L 2103L 2100S 2101S 2102S 2103S Vestibule Locks For further details see pages 24-25 5200 5201 5202 5203 5204 2200 2201 2202 2203 2204 E2200 E2201 E2202 E2203 E2204 5205 5206 5207 5208PWD 5210 2205 2206 2207 2208PWD 2210 E2205 E2206 E2207 E2208PWD E2210 20
Sliding Doors For further details see pages 26 5300 5301 5302 5303 2300 2301 2302 2303 Combination For further details see pages 27-28 5400 5401 5402 5403 2400 2401 2402 2403 E2400 E2401 E2402 E2403 5405 5409 5422 5428 2405 2409 2422 2428 E2405 E2409 E2422 E2428 21
5000/2000 Series Mortice Nightlatches Deadlocking mortice nightlatches feature a latchbolt that is retracted by a series of cylinder or turnsnib configurations. The latchbolt is automatically locked when the door is closed. Nightlatch 5000 / 2000 / E2000 MNC5000 Cylinder & Turnsnib 60 Opened by key from outside. 60 Opened by turnsnib from inside. Latchbolt automatically deadlatches 5 when door is closed. Available in left 28.5 and right handing. 5 175 28.5 64 118 175 64 118 Cylinder Nightlatch 5001 / 2001 / E2001 88 46 Single Cylinder 88 46 19 Opened by key from outside. Latchbolt automatically deadlatches 25 19 when door is closed. Available in left 4 25 and right handing. 4 Communicating Door Lock 5002 / 2002 / E2002 Double Cylinder MNC2200 MNC2200E Opened by key from either side. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. Exit Door Latch 5003 / 2003 / E2003 Turnsnib Opened by turnsnib from inside. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. 22
5100/2100 Series Mortice Deadlocks Deadbolts have a rectangular bolt. Deadbolts are operated by either cylinders or turnsnibs to retract the latchbolt. MNC5100 Deadlock 60 5100 / 2100 60 Cylinder & Turnsnib Opened by key from outside. 28.5 Opened by turnsnib from inside. 175 64 118 Available in left and right handing. 28.5 175 64 118 3 18 88 27 Lockup Shop Deadlock 3 18 88 27 18 5101 / 2101 25 13.5 18 Single Cylinder 86 118 140 4 25 13.5 Opened by key from outside. 86 118 140 4 Available in left and right handing. 16 16 Glass Door Deadbolt 5102 / 2102 Double Cylinder MNC2100L (Long throw) Opened by key from either side. MNC2100S (Short throw) Available in left and right handing. 22 31 181 156 165 Exit Deadbolt 34 5103 / 2103 Turnsnib Opened by turnsnib from inside. 25 Available in left and right handing. 36 21 or 34 Shown with aluminium cover plate 22 23
5200/2200 Series Mortice Vestibule Locks The vestibule locks are fully reversible and the function can be changed without removing the case. The auxiliary deadlatch bolt automatically locks the main bolt on closing the door. The vestibule locks always feature an inside handle to allow egress in case of emergencies. Vestibule or Entrance Lock 5200 / 2200 / E2200 MNC5000 Cylinder & Turnsnib 60 Latchbolt operated by handle from 60 either side. Outside handle is locked or unlocked by inside turnsnib. Key outside 5 retracts latchbolt only. Inside handles 28.5 are always free. Latchbolt automatically 5 deadlatches when door is closed. 175 28.5 64 118 Available in left and right handing. 175 64 118 Class Room Lock 46 88 5201 / 2201 / E2201 46 19 88 Single Cylinder Latchbolt operated by handle from either 25 19 side. Outside handle is locked or unlocked 4 25 by key from outside. Inside handles are always free. Latchbolt automatically 4 deadlatches when door is closed. Available in left and right handing. Exterior or Exit Door Lock 5202 / 2202 / E2202 Double Cylinder MNC2200 MNC2200E Latchbolt operated by handle from either side. Outside handle is locked or unlocked by key from inside. Key outside retracts latchbolt only. Inside handles are always free. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. Exit Door Latch 5203 / 2203 / E2203 Turnsnib Latchbolt operated by handle from either side. Outside handle is locked by turnsnib inside. Inside handles are always free. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. 24
Storeroom Lock Exit Door Latch 5204 / 2204 / E2204 5207 / 2207 / E2207 Single Cylinder No cylinder or turnsnib Key outside retracts latchbolt only. Latchbolt operated by handle from Outside handle is ridged at all times. inside only. No outside handle. Inside handles are always free. Latchbolt automatically deadlatches Latchbolt automatically deadlatches when door is closed. Available in left when door is closed. Available in left and right handing. and right handing. Office Lock Special Classroom Lock 5205 / 2205 / E2205 5208PWD / 2208PWD / E2208PWD Cylinder & Turnsnib Latchbolt operated by handle from Cylinder & Turnsnib either side. Outside handle is locked or Latchbolt operated by handles either unlocked by either key from outside side except when outside handle is or turnsnib inside. Inside handles are made inoperable by the key from always free. Latchbolt automatically outside or turn snib inside. Cylinder has deadlatches when door is closed. dual function. When turned towards Available in left and right handing. strike, cylinder unlocks outside handle. If turned further, cylinder will also retract Latchbolt. Inside handles are always free. Available in left and right handing. Exit Door Lock Privacy Lock 5206 / 2206 / E2206 5210 / 2210 / E2210 Single Cylinder Turnsnib & release Latchbolt operated by handle from Latchbolt operated by handles either either side. Outside handle is locked side. Outside handle is locked. Inside or unlocked by inside cylinder. handles are always free. Has Kick Off Latchbolt automatically deadlatches function. Available in left and right when door is closed. Available in left handing. and right handing. 25
5300/2300 Series Mortice Sliding Door Locks Sliding door locks are operated by either cylinder or turnsnib configuration. The deadbolt has a claw bolt that engages behind the strike plate to prevent the bolt being withdrawn while sliding the door. Sliding Door Deadlock 5300 / 2300 MNC5300 Cylinder & Turnsnib 60 60 Opened by key from outside. Opened by turnsnib from inside. Available in left and right handing. 28.5 28.5 175 50 175 50 64 118 64 118 Lock Up Shop Sliding Deadlock 3 27 3 18 8818 88 5301 / 2301 27 Single Cylinder 19 19 Opened by key from outside. 25 13.5 25 13.5 Available in left and right handing. 86 18168 140 22 118 140 4 4 16 16 31 Sliding Glass Door 181 156 165 Deadlock 34 5302 / 2302 Double Cylinder Opened by key from either side. 36 21 or 34 25 Available in left and right handing. Shown with aluminium MNC2300 cover plate 22 Exit Sliding Door Deadlock 5303 / 2302 181 156 165 34 Turnsnib Opened by turnsnib from inside. Available in left and right handing. 36 28 25 Shown with aluminium cover plate 26
5400/2400 Series Mortice Combination Locks Combination locks are fully reversible and the function can be changed without removing the case. The auxiliary deadlatch bolt automatically locks the main bolt on closing the door. The combination locks feature is the inside handle is always fixed when locked by the cylinder or snib. Combination Entrance Lock 5400 / 2400 / E2400 MNC5000 Cylinder & Turnsnib 60 Latchbolt operated by handles from either side. Both handles are locked 5 60 or unlocked by either key outside or turnsnib inside. Latchbolt automatically 28.5 deadlatches when door is closed. 175 64 118 Available in left and right handing. 5 28.5 175 64 118 Entrance Door Lock 88 5401 / 2401 / E2401 46 Single Cylinder 19 88 Latchbolt operated by handles from 46 25 either side. Both handles are locked or unlocked by key from outside. Latchbolt 4 19 automatically deadlatches when door is 25 closed. Available in left and right handing. 4 Glass Door Lock 5402 / 2402 / E2402 Double Cylinder Latchbolt operated by handles from MNC2200 MNC220E either side. Both handles are locked or unlocked by key from outside or key from inside. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. Patio Door Lock 5403 / 2403 / E2403 Turnsnib Inside Latchbolt operated by handle from either side. Both handles are locked or unlocked by turnsnib from the inside. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. 27
5400/2400 Series Mortice Combination Locks Entrance Office Lock 5405 / 2405 / E2405 Cylinder & Turnsnib MNC5000 Latchbolt operated by handles 60 from either side. Both handles are locked or unlocked by turnsnib from 60 inside. Key outside retracts latchbolt. 5 Latchbolt automatically deadlatches 28.5 when door is closed. Available in left 5 and right handing. 175 64 118 28.5 175 64 118 Passage Latch 5409 / 2409 / E2409 46 88 Non-locking 88 Opens by handles either side at all 19 46 times. Available in left and right 25 handing. 19 4 25 4 Glass Door Lock 5422 / 2422 / E2422 Double Cylinder Latchbolt operated by handles from either side. Both handles are locked MNC2200 MNC220E or unlocked by key from inside. Key outside retracts latchbolt. Latchbolt automatically deadlatches when door is closed. Available in left and right handing. Courtroom Lock 5428 / 2428 / E2428 Double Cylinder Latchbolt operated by handles from either side. Both handles are locked or unlocked by key from outside or by key from inside. Latchbolt automatically deadlatches when door is closed. Key outside or inside retracts latchbolt. Available in left and right handing. 28
5000 Series Mortice Locks Auxilary Parts Rebate Kits – Strike Plates Auxilary Parts AU X I LAuxilary I A RYParts PA R T14S 14 Auxilary Parts AU X I L IAU 14 A RY PA XIL I14ARRY T S PA R T S 29 27 29 29 27 27 29 27 Rebate Kits Strike Plates Rebate Kits Strike Plates Rebate Kits Strike Plates 13 13 13 13 13 13 30 27 30 30 27 27 30 27 30 27 30 27 75 40 190 177 75 40 190 177 2 50 184 177 102 50 184 177 102 50 184 177 Latch Rebate Kit SS Deadbolt Rebate Kit SS MNC5000RK MNC5100RK • For 5000, 5409 & 5000ND • For 5100 Latchbolt Rebate Kit DeadboltLatchbolt Rebate KitRebate Kit Deadbolt Rebate Kit MLRK5000-01 MLRK5100-01 MLRK5000-01 Latchbolt Rebate KitMLRK5100-01 Deadbolt Rebate Kit MLRK5000-01 MLRK5100-01 Finishes available SSS, PBU, CP & FB Finishes available Finishes SSS, PBU, available CP &SSS, FB PBU, CP & FB Finishes available SSS, PBU, CP & FB Latchbolt Rebate Kit Latchbolt DeadboltRebate Rebate KitKit Finishes available SSS, PBU, CP Deadbolt & FB RebateFinishesKitavailable SSS, PBU, CP & FB Latchbolt Rebate Kit Deadbolt Rebate Kit 27 27 27 59 32 45 32 32 86 118 140 86 118 140 86 118 140 39 54 70 39 54 70 39 54 70 29 16 29 16 29 16 Universal Strike Plate Deadbolt/Sliding Universal Lock Strike Strike Plate Deadbolt/Sliding Lock Strike Universal Strike Plate MLPA5000-02 SSMLPA5100-02 MLPA5000-02Strike Plate SS Extended Universal Strike Plate MLPA5100-02 Deadbolt/Sliding Lock Strike Deadbolt/Sliding Lock Strike SS Finishes available SSS, PBU, PSS & FB Finishes available FinishesSSS, available PBU, PSS FB MLPA5000-02 SSS,&PBU, PSS & FB Finishes available SSS, PBU,MLPA5100-02 PSS & FB Finishes available SSS, PBU, PSS & FB Finishes available SSS, PBU, PSS & FB MNC5000-02 MNC5000-03 MNC5100-02 • For 5000 and 2200 • For 5000 and 2200 • For 5100 and 5300 Face Plates Face Plates Face Plates 29
5000 Series Mortice Locks Cam & Snib Matrix Note: The 2000 Series Deadlatches use the same Cams and Adaptors as this chart. The 2100 and 2300 Dead Bolts use rabbit ears Cams which are supplied with the lock. KEY • Required Select L/H or R/H 5000 5200 5002 5003 5204 5206 5205 5202 5203 5001 5100 5201 5102 5103 5101 • Optional OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN CAMS MNCK2CAM • MNCW2CAM • • • MNCX2CAM • • • • • • • MNCY2CAM • • MNCZ2CAM • • • MNCXZCAM SNIB Adaptors MNCAD5000-01LH • • MNCAD5000-01RH • • MNCAD5100-01 • • MNCAD5200-01 • • • MNCAD5200-02RH Anti-lockout • • • MNCAD5200-02LH Anti-lockout • • • HOLD Back MNC570HBRH • • • • • • MNC570HBLH • • • • • • 30 P 28
KEY • Required Select L/H or R/H 5208- • Optional 5400 5409 5300 5405 5402 5403 5428 5207 5422 5302 5303 5401 5210 5301 pwd Must be fitted upside down OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN OUT IN CAMS MNCK2CAM • MNCW2CAM • • • • MNCX2CAM • • MNCY2CAM • • MNCZ2CAM • • • • MNCXZCAM • • SNIB Adaptors MNCAD5000-01LH • MNCAD5000-01RH • MNCAD5100-01 • • MNCAD5200-01 • • • MNCAD5200-02RH Anti-lockout • • • MNCAD5200-02LH Anti-lockout • • • HOLD Back MNC570HBRH • • MNC570HBLH • • P 28 31
You can also read