80 Series Exit Device - Product Catalog
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Product Catalog
80 Series
Exit Device
90641
10/21 Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
2
80 Series
1-800-727-5477 • www.sargentlock.comTable of Contents
80 Series
Series
Features and Innovations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UL Fire Door Ratings and Opening Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Windstorm Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rim Exit Device for Wide Stile Doors (Panic & Fire Rated)
8888/8810 Multi-Function Rim Exit Devices & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
8800 Rim Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8800 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Mortise Lock Exit Device for Wide Stile Doors (Panic & Fire Rated)
8900 Mortise Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8900 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Surface Vertical Rod Exit Device for Wide Stile Doors (Panic & Fire Rated)
8700 SVR Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8700 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
NB8700 Less Bottom Rod SVR Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
NB8700 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Concealed Vertical Rod Exit Device for Wide Stile Doors (Panic & Fire Rated)
MD8600 (Windstorm Rated) & NB-MD8600 Concealed Vertical Rod Exit Device for Metal Doors . . . . . . . . . . . . . . . . 18
MD8600 & NB-MD8600 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
AD8600 & NB-AD8600 CVR Devices for Aluminum Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
AD8600 & NB-AD8600 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
WD8600 & NB-WD8600 CVR Devices for Wood Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
WD8600 & NB-WD8600 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Narrow Design Rim Exit Device for Wide & Narrow Door Stiles (Panic & Fire Rated)
8500 Rim Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8500 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
AD8500 Narrow Design Rim Exit Device for Aluminum Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
AD8500 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Narrow Design Mortise Lock Exit Device for Wide Door Stiles (Panic & Fire Rated)
8300 Mortise Exit Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
8300 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Narrow Design Concealed Vertical Rod Exit Device for Wide & Narrow Stiles (Panic & Fire Rated)
MD8400 & NB-MD8400 Narrow Stile CVR Devices for Metal Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
MD8400 & NB-MD8400 Functions & Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
AD8400 & NB-AD8400 Narrow Stile CVR Devices for Aluminum Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
AD8400 & NB-AD8400 Functions & Trims for Aluminum Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
10/21
3
90641
1-800-727-5477 • www.sargentlock.comTable of Contents
80 Series
Low Profile Center & Top Latching Vertical Rod Exit Device (Panic & Fire Rated)
LP8600 & LR8600 Center & Top Latching Exit Devices for Pairs of Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
LP8600/LR8600 Functions & Trims for Pairs of Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
LS8600 Center and Top Latching Vertical Rod for Single Door Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LS8600 Functions & Trims for Single Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
UL Listed Windstorm Products
MD8600 & NB-MD8600 Concealed Vertical Rod Exit Devices: UL Hurricane-Resistant . . . . . . . . . . . . . . . . . 38-39
HC8800 Rim Exit Devices: UL Listed Hurricane-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
WS8800 Rim Exit Devices: UL Listed Hurricane-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43
WS8900 Mortise Exit Device: UL Listed Hurricane-Resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-45
HC4-8700 SVR Exit Devices: UL Listed Hurricane-Resistant (up to 150 psf) . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-47
HC8700 SVR Exit Devices: UL Listed Hurricane-Resistant (up to 65 psf) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-49
FM8700 2-Point SVR Exit Device: UL Listed Tornado-Resistant ICC500 (2014) . . . . . . . . . . . . . . . . . . . . . . . . 50-51
Electrical Options
ElectroLynx® Information & Option Compatibility Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Security Shim Kit Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
SARGuide PL- & TL- Options & Latch Bolt Monitoring Option (53-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Alarm (AL-) Option & Request-to-Exit (55-) Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Electric Latch Retraction Option (56-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electric Latch Retraction Motor Kits & Push Rail Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Delayed Egress Option (57-) & Electro-Magnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Electric Dogging (58-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
ElectroGuard Delayed Egress Option (59-) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Electrified & Monitored (54-) ET Trims & Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Lever and Trim Designs
ET Trim, Levers and Pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Coastal Series Levers & Thumbpiece Pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Studio Collection Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-66
Ordering Gramercy Series Levers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Anti-Vandal Trim, 988 Surface Bolt, ET Plates & Dummy Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Miscellaneous
Cylinder Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Mullions: Aluminum, Steel & Electrified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Mullion Accessories and Stabilizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Through-bolt Kits, Rod Extensions and Shim Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Door Coordinators, End Caps and Cylinder Dogging Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Rail Sizes and How to Order ET Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Mechanical Options & Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Cylinder Options & Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Finishes & Finish Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Architectural Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
10/21
4
90641
1-800-727-5477 • www.sargentlock.comFeatures and Innovations
80 Series
SARGENT manufactures a full line of exit devices including vertical rod, rim and mortise for both standard and narrow stile doors. These
devices provide the best combination of simplicity, strength, durability, aesthetics and innovation and are perfect for applications such as
commercial office buildings, medical and educational institutions.
Simplicity Strength & Durability
• Easy installation and maintenance-free design • Made of finest component materials
• “True” architectural hardware finishes consistent with • Heavy duty mounting construction
BHMA/ANSI standards • Built to withstand abusive conditions
• Few moving parts – less wear • 5 Year warranty
• Modular construction
Hurricane-Resistant Products and Certifications Innovation
• UL Certified Latching Hardware and Assemblies (ZHEM & ZHLL) • Broad offering of electro-mechanical solutions for the most
• Product-specific detailed certifications and listings demanding access/egress control applications
• Available with Rim, Mortise, SVR & CVR devices • MicroShield® anti-microbial finish coating offers a new level
of protection
• SARGuide™ exit device contains an electroluminescent touchpad
Security to enhance the visibility of exit locations in dark or smoke-filled
passages and effectively improve the safety of any public building
• Double cylinder functions available
• CTL (Center and Top Latching) Vertical Rod Devices offer less bottom
• Torx® and spanner screws rod convenience with true center latching for added security
• Anti-vandal trim options
• Master keying with SARGENT Security Key systems available
(Signature, Keso F1, Keso and XC)
EcoFlex®
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
E N T • FLE
FF
• Reduces energy consumption up to 95% for exit trim, as certified by Green Circle, which lowers operating costs; assists with load
IC I XI
E
BL
EcoFlex
E •
®
reduction in optimizing energy performance credit in LEED, and reduces the number of power supplies requires.
DEPEN D
inside
AB
• Field configurable to fail-safe or fail-secure, and operates from 12-24VDC, offering greater flexibility in system design.
LE
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
• Innovative actuator design provides superior reliability through higher performance and reduced maintenance; the ability to have longer cable
runs without negatively impacting lock function. It reduces the risk of voltage drops and eliminates inductive kickback, and lowers the total cost
of owner ship.
MicroShield® Coating
MicroShield®
ASSA ABLOY Group companies offer MicroShield®, an anti-microbial coating for door hardware. MicroShield uses proven silver ion-based
technology from Agion®, a leading provider of antimicrobial solutions, to stem the spread of bacteria and other microbes.
MicroShield® is a trademark of the respective ASSA ABLOY Group company.
The Agion antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to ensure the
surfaces will be free of destructive microbes. ASSA ABLOY makes no representations or warranties, express or implied, as to the
efficacy of the Agion antimicrobial. A copy of the Agion warranty is available upon request. Agion is a registered trademark of Agion
Technologies, Inc., Wakefield, MA, USA.
The TL- SARGuide Electroluminescent exit device increases visibility The PL- SARGuide Photoluminescent Exit Device is a non electrical
of exit locations in dark or smoke-filled passages, supplementing option which produces visible EXIT signage in darkness or low lit
existing codes for egress lighting. areas.
• SARGuide utilizes state-of-the-art FLATLITE electroluminescent • Approved for use in New York City in accordance with RS 6-1 and RS
lighting from E-Lite Technologies Inc. 6-1A.
• Can be wired in conjunction with Fire Alarm system or can be wired • Recharges from ambient light.
for continuous operation. • No wiring or maintenance needed.
• UL Listed for use on panic (UL 305) and fire-rated (UL 10C) exit
devices.
10/21
5
90641
1-800-727-5477 • www.sargentlock.comUL Fire Door Ratings
and Openings Sizes
80 Series
Maximum Door Opening-Fire Doors
with
12-HC980 or with VR/VR SVR/Mortise CVR/Mortise CVR/Mortise VR/VR
Type
Exit Device Door Single Door 12-980 or with 12-HD980 Doors Doors MD Doors WD Doors Double
Material 12-HCL980 12-L980 Mullion Swing Same Swing Same Swing Same Swing Same Egress
Mullion Direction Direction Direction Direction
12-8800 Metal 3 Hour 4’ 3 Hour 8’ x 8’ 1.5 Hour 8’ x 8’ 3 Hour 8’ x 10’ –– –– –– –– ––
x 10’
Rim
12-8500 Metal 3 Hour 4’ x 8’ 3 Hour 8’ x 8’ 1.5 Hour 8’ x 8’ 3 Hour 8’ x 8’ –– –– –– –– ––
3 Hour 4’
Mortise Lock
12-8900 Metal x 10’ –– –– –– –– 3 Hour 8’ x 8’ 3 Hour 8’ x 10’ –– ––
12-8300 Metal 3 Hour 4’ –– –– –– –– –– 3 Hour 8’ x 10’ –– ––
x 10’
12-FM8700 Metal 3 Hour 4’ x 8’ –– –– –– 3 Hour 8’ x 8’ –– –– –– ––
SVR
12-8700 Metal –– –– –– –– 3 Hour 8’ x 8’ 3 Hour 8’ x 8’ –– –– 3 Hour 8’ x 8’
12-NB8700 Metal –– –– –– –– 3 Hour 8’ x 10’ –– –– –– 3 Hour 8’ x 10’
12-MD8600 Metal –– –– –– –– 3 Hour 8’ x 10’ –– 3 Hour 8’ x 10’ –– 3 Hour 8’ x 10’
12-NB-
Metal –– –– –– –– 3 Hour 8’ x 10’ –– –– –– 3 Hour 8’ x 10’
CVR
MD8600
12-MD8400 Metal –– –– –– –– 3 Hour 8’ x 10’ –– 3 Hour 8’ x 10’ –– 3 Hour 8’ x 10’
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
12-NB-
MD8400 Metal –– –– –– –– 3 Hour 8’ x 10’ –– –– –– 3 Hour 8’ x 10’
3 Hour 4’
CVR/Mortise
12-LS8600 Metal –– –– –– –– –– –– –– ––
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
x 10’
12-LP8600 & 3 Hour 8’ x 3 Hour 8’ x
12-LR8600 Metal –– –– –– –– 10’ –– –– –– 10’
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no
representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or
specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance
with all applicable codes and ratings.
Notes:
• Please contact door manufacturer for specifications regarding fire door construction.
• Consult wood door manufacturers for current UL listing.
10/21
6
90641
1-800-727-5477 • www.sargentlock.comWindstorm Certifications
80 Series
Windstorm Certifications: Florida Building Codes & UL Listings
SARGENT Manufacturing’s products meet building codes that require hurricane, windstorm and FEMA certifications, including some of the
most stringent building codes as specified in the Florida Building Code, Miami Dade Code and the International Building Code. Listed below
are certifications and standards met by the 80 Series lock.
Florida Building Code: FL2998
UL Certification Directory: ZHEM.R21744 – Latching Hardware
ANSI/SDI-BHMA A250.13 “Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies”
“Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by
ANSI/ASTM E330
Uniform Static Air Pressure Difference”
“Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective
ANSI/ASTM E1886
Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials”
“Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems
ASTM E1996
Impacted by Windborne Debris in Hurricanes”
(TAS) 201 “Impact Test Procedures”*
“Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by
(TAS) 202
Uniform Static Air Pressure Difference”
(TAS) 203 “Criteria for Testing Products Subject to Cyclic Wind Pressure Loading”*
* Published in the “Florida Building Code”
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing
Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
(Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
UL Certification Directory: ZHLL.R21744 – Products for Use in Windstorm-rated Assemblies
Certifications to meet assembly requirements are done in conjunction with doors from ASSA ABLOY Group companies CECO DOOR and
CURRIES.
“Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by
ASTM E330
Uniform Static Air Pressure Difference”
“Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective
ANSI/ASTM E1886
Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials”
“Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems
ASTM E1996
Impacted by Windborne Debris in Hurricanes”
AAMA/WDMA/CSA
“Standard/Specification for Windows, Doors, and Unit Skylights”
101/I.S.2/A440
FEMA Publication 320 “Taking Shelter From the Storm: Building a Safe Room for Your Home or Small Business”, investigated with
(2014) respect to impact and pressure requirements only.
FEMA Publication 361 “Design and Construction Guidance for Community Safe Rooms”, investigated with respect to impact and
(2015) pressure requirements only.
“ICC/NSSA Standard for the Design and Construction of Storm Shelters”, investigated with respect to impact
and pressure testing. Minimum missile impact speeds vary with the design wind speed desired for a particular
ICC 500 (2014)
product. The information below correlates design wind speed to the minimum missile speeds as discussed in
Table 305.1.1 of ICC 500
Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing
Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion
of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official
(Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
10/21
7
90641
1-800-727-5477 • www.sargentlock.com8888/8810 Multi-Function Rim
Exit Device and Trims
80 Series
8888/8810 Multi-Function exit device and trim
• Device & trim sold separately; easy to mix and match
• Designed for standard width stile applications on wood and
metal doors
• 7 functions available as determined by the trim function
• 3 trim designs available:
- 700 ET Controls
- 88 Lever & Rose trim
- Pull trims
• Single and double door applications with a mullion
Specifications
Door Type Wood or metal Doors
Door Thickness 1-3/4" (44mm) minimum thickness. For doors over 1-3/4" to 2-1/4"
thick, specify thickness and order as 31-
Stile 4-1/2" (114mm) minimum stile width
The 8888/8810 Rim Exit Device
• ANSI/BHMA A156.3 - Grade 1 Mounting Supplied standard with wood and machine screws
• UL10C (Fire) and UL305 (Panic) Listed Available with through-bolts and mortise nuts
• Device is non-handed Chassis Cover Cold drawn stainless steel, brass or bronze with ANSI/BHMA Finishes
• ANSI/BHMA architectural finishes Chassis Nonferrous alloy (Panic) Ferrous alloy (Fire Rated)
• Four standard sizes available Rails Roll Formed Stainless Steel, Brass or Bronze with ANSI/BHMA Finishes
To Order: Specify options, 8888 or 8810, Hand Non-handed
Rail Size and Finish Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for
Example: 12-19-8888F x 32D (Non 12- only) cylinder dogging (#41 cylinder supplied)
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Latchbolt Stainless steel, 3/4" (19mm) throw
Strike 649 Strike supplied standard for panic & fire rated openings
700 Series ET Control Fire Exit Hardware See chart - Page 6
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
3-9/16" MAX* Rail Chart
(90mm)
- Rails are available in 4 sizes, use door width to determine size needed.
- Rails will be factory cut to size if door width is supplied or can be cut in the field
Stock Size Door Widths Remarks
E 24" to 32" (61cm to 81cm) No cutting required for 32" (81cm) door
8-1/16"
(205mm)
F 33" to 36" (84cm to 91cm) No cutting required for 36" (91cm) door
J 37" to 42" (94cm to 107cm) No cutting required for 42" (107cm) door
G 43' to 48" (110cm to 122cm) No cutting required for 48" (122cm) door
1-13/16" 13/16" 88 Lever and Rose Trim
(46mm) (21mm)
• The 88 Lever and Rose Trim is sold separately
from the exit device and can be used with 8888
& 8810 Exit Device.
• The trim is non handed and is through-bolted
LB to the chassis for greater security and durability.
ROSE: L Available in 4 functions and 4 lever designs to
The 700 Series ET Control is sold LEVER: B accommodate most requirements.
separately from the exit device and can
be used with 8888 & 8810 Exit Device. 688 Trim Retrofit Kit
The trim is non handed and is through-
649 Strike
1-5/32"
bolted to the chassis for greater security • 688 Trim Retrofit kit allows an • Supplied standard (29mm)
and durability. Available in 7 functions 8810/8888 rim exit with an ET to for panic & fire rated
and SARGENT Studio, Coastal and replace Von Duprin’s 98/99 series openings
standard lever designs to accommodate exit with trim with minimal • Surface applied
most requirements. door prep. 3-11/16"
• Black nylon coated
• ANSI/BHMA Finishes • Order as: 688 Kit 3/4"
(94mm)
• Easy operating lever handle allows (19mm) 1/4"
convenient one hand operation (6mm)
• ET trim is not available in 32 or 32D
10/21
• Stainless steel levers are available
8
90641
1-800-727-5477 • www.sargentlock.com8888/8810 Multi-Function Rim
Exit Device and Trims
80 Series
How to order 8888/8810 Multi-Function Exit Devices: How to order trim for 8888 & 8810 Exit Devices:
Specify the following: Specify the following:
Options Series Rail Finish Options Trim Designation Hand Finish Options
16- 8888 or 8810 F 32D 10- 713-8 ET_* RHR 26D
10- 88-CL_ * Non-Handed 10B Exit Trim
• All trims and functions listed on this page, work with 8888 & 8810 Exit 60- 814-MSL RHR 04
12-
Devices *16-
10-
• Available options listed at the right *Specify lever design 19-
11-
• 8888 & 8810 are identical products and are non-handed Available Options listed at the right 43- 11-70-
5CH- 11-72-7P-
• Exit devices are not available in 14, 15, 26 and 26D finishes 11-73-7P-
GL-
CPC- 21-
LC- 22-
700 Series ET Trim SARGENT ANSI LD- 60-
PL- 63-
Function Function Description & Cylinder Info 64-
Numbers Numbers (1-3/4" Door) Trim Designations +70-
Night Latch +72-
04 03 Key Retracts Latch 704 ET_ x Hand & Finish +73-
#34 Cylinder Supplied +73-7P-
+65-73-
No outside operation (No Cylinder) +65-73-7P-
10 02 ET Control is used as Pull Only 710 ET_ x Hand & Finish BR-
LC-
Key Outside Unlocks/Locks Trim SC-
13 08 #41 Cylinder Supplied 713-8 ET_ x Hand & Finish SE-
++ SF-
*** SG-
700 Series ET Controls 15 14 Passage Only (No cylinder) 715-8 ET_ x Hand & Finish
To order: Specify options followed by Freewheeling Trim - * Supplied with
trim designation, lever design, hand 40 02 No outside operation 740 ET_ x Hand & Finish standard 41 cylinder,
and finish (as shown to the right). (No Cylinder) Dummy Trim for cylinder options,
Freewheeling Trim - see trim options
Example: 11-SG-713-8 x RHR x 10B
43 08 Key Outside Unlocks/Locks Trim 743-8 ET_ x Hand & Finish ** Only available with
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Freewheeling Trim #41 Cylinder Supplied 15, 26D and 32D
Freewheeling Trim - finishes
The lever rotates when the door is 44 03 Key Retracts Latch 744 ET_ x Hand & Finish + S
ingle crossed
locked preventing excessive force #34 Cylinder Supplied options are not
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
from being applied to the horizontal available with 88
Note: ET trim is not available in 32 (629) or 32D (630) Lever & Rose Trim
lever
with J Lever
++ Double Cross
88 Lever and Rose Trim ANSI options
To order: Specify options followed Function are only available
with 88 Lever &
by trim designation, lever design and Numbers Description Trim Designations Rose Trim
finish (as shown to the right).
Key Retracts Latch
Example: 10-SG-88-CLP x 26D 03 Cylinder Supplied 88-KL_ x Finish
No outside Operation (No Cylinder)
02 Dummy Trim 88-DL_ x Finish
Key Outside Unlocks/locks Trim
08 Cylinder Supplied 88-CL_ x Finish
Available
14 Passage Only (No cylinder) 88-LL_ x Finish Finishes
Lever Designs available for 88 Lever & Rose Trim are L, B, J & P
Note: For 88 Lever & Rose trim, the 1st letter is the function, the 2nd is the “L” Rose Design & the 3rd is the SARGENT BHMA
Finishes Finishes
lever design specified
03 605
04 606
Keyed & Non Keyed Pull Trim for 8888 & 8810 Devices Trim Designations 09 611
Use the six digit designation (Ex “866-MAL”) when ordering 10 612
trim without an Exit Device, always specify options, 10B 613
designation, finish & hand 10BE 613E
Example: 10-SG-814-FSW x 04 x RHR 10BL 613L
14 618
SARGENT Description & Cylinder 15 619
Function #’s ANSI Info. (1-3/4" Door) 20D 624
Key Retracts Latch 26 625
04 03 #34 Cylinder Supplied
814-FSL* 814-FSW* 814-MSL* 814-PSB* 814-STS
26D 626
32 629
No O/S Operation or Cylinder
10 02 (Pull Only)
810-FLL 810-FLW 810-MAL 810-PTB 810-STS 32D 630
Note: 88 Lever & Rose trim & ET’s are not available in 32(629) or 32D(630) BSP —
* FSL, FSW, MSL and PSB trims are used with (HC-& 12-) 8888 and 8804 only and are the same as FLL, FLW, MAL and PTB pulls, except for cylinder hole located 3/8”
(9mm) lower
WSP
10/21
Note: Pulls and thumb piece trims are not available in 14, 15, 26 or 26D
9
90641
1-800-727-5477 • www.sargentlock.com8800 Rim Exit Device
80 Series
8800 Series 8800 Features
Rim Exit Device • Designed for standard width stile applications on wood and metal doors
• Also available as an HC8800 or WS8800 for hurricane-resistant
applications, see Hurricane-Resistant section of this catalog
• Single point rim latching device
• Single door & double door applications with mullions
• Quiet operation and solid security
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
Specifications 8800 Series Rim Exit Device
Door Type Metal Doors
Door Thickness 1-3/4" (44mm) minimum thickness. For doors over 1-3/4" to 2 1/4" thick,
specify thickness and order as 31-
Stile 4-1/2" (114mm) minimum stile width
Rail sizes as Rails are available in 4 sizes, use door width to determine size needed.
determined by door Rails will be factory cut to size, if door width is supplied
width • E Rail for 24" to 32" door widths, No cutting required for 32" door
• F Rail for 33" to 36" door widths, No cutting required for 36" door 49- Lock/Unlock Indicator
• J Rail for 37" to 42" door widths, No cutting required for 42" door
• G Rail for 43" to 48" door widths, No cutting required for 48" door Option
Strike 649 Standard Black Nylon Coated • Displays whether the door
has been secured by the
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Optional Strikes 642, 644 and 613
inside cylinder.
Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for
cylinder dogging (#41 cylinder supplied) • Red icon indicates locked
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Electric Options AL- Alarm • White icon indicates
PL- SARGuide Photoluminescent Coated unlocked
TL- SARGuide Illuminated Touchpad • Dogging overrides 49-
49- Indicator functionality (must order less
53- LX Latchbolt Monitor dogging)
54- Outside Lever Monitoring • Available on 8816 and 8866
55- Request-to-Exit Signal - Rail Monitoring
functions only
56- Remote Latch Retraction
57- Delay Egress & Electromagnets 649 Strike
58- Electric Dogging
59- Electroguard – Self Contained Delayed Egress • Supplied standard for panic
& fire rated openings
Mounting Fasteners Supplied standard with wood and machine screws
Available with through-bolts and mortise (sex) nuts • Surface applied
Latch Bolt Stainless steel, 3/4" (19mm) throw • Black nylon coated
Device Centerline from 41" (1041 mm) for Standard Applications
Finished Floor
Center Case Dimensions 8-3/8" (213mm) x 2-5/8" (67mm)
Projection Pushbar Neutral – 3" (76 mm)
Pushbar Depressed – 2-1/8" (54 mm)
Fire Exit Hardware See Chart – Page 6
688 Trim Retrofit Kit Alternate Strikes For 8800 Rim Devices
642 Strike 644 Strike 613 Strike
• 688 Trim Retrofit kit
allows an 8800* Series 7/16"
(38mm)
rim exit with an ET to 3-5/8" 2"
replace Von Duprin’s 3-5/8"
(92mm) (92mm)
(92mm)
98/99 Series exit with
trim with minimal door “L”
1-1/2" 2-7/16"
prep. (38mm) (62mm)
1-1/2"
1-1/2"
* Except for 16 function (38mm)
(38mm)
1/4"
5/8"
• Order as: 688 Kit (6mm)
(16mm)
• Mortised. Dimension “L” • Surface applied. For use
equals door thickness plus on pairs of doors without
• Half mortised.
10/21
1/2" (13mm). Black nylon mullion. Ductile Iron.
coated on lip only Black nylon coated Black nylon coated
10
90641
1-800-727-5477 • www.sargentlock.com8800 Functions and Trims
80 Series
Options Series Function Rail Lgth Trim Hand Outside Finish Inside Finish Door Width
F1-83-56 88 13 F ETL RHR 26D 32D 36"
Options
700 Series ET Trim SARGENT ANSI ANSI Type 1
8800
Exits with ET Trim, specify Function Function Description & Cylinder Info 8800
lever design after the ET Numbers Numbers (1-3/4" Door) Panic & Fire Mechanical Options:
designation (e.g., ETL) 12-
Night Latch
16-
04 03 Key Retracts Latch 8804 x ET_ 19-
#34 Cylinder Supplied 31-
36-
Key unlocks Trim, Trim retracts latch/ 37-
06 09 Trim relocks when key is removed 8806 x ET_ 43-
#41 Cylinder Supplied 53-
54-
10 01 No outside operation (No Cylinder) 8810 55-
56-
No outside operation (No Cylinder)
10 02 ET Control is used as Pull Only 8810 x ET_ 56-HK-
Lever Designs for ET Controls 57-
58-
A, B, E, F, J, L, P, W Key Outside Unlocks/locks Trim 59-
13 08 #41 Cylinder Supplied 8813 x ET_ 5CH-
Also available with Coastal Series & BC-59-
76-
Studio Collection Levers 15 14 Passage Only (No cylinder) 8815 x ET_ 85-
86-
Key Outside Retracts Latch;
ET Designation with Suffix 16 10 Key Inside Unlocks/Locks O/S Trim 8816 x ET_
87-
AL-
(Used to order ET without device) O/S #34 Cylinder & I/S #44 Cylinder Supplied BT-
CPC-
8800 Series: 704, 706-8, 710, 713-8, Freewheeling Trim - GL-
715-8, 716, 740, 743-8, 744, 746-8, 40 02 No outside operation 8840 x ET_ LD-
(No Cylinder) Dummy Trim PL-
773-8, 774-8, 775-8 & 776-8 ** SG-
Freewheeling Trim - TB-
Freewheeling Trim 43 08 Key Outside Unlocks/locks Trim 8843 x ET_ TL-
#41 Cylinder Supplied Cylinder Options:
10-
The lever rotates when the door is
Freewheeling Trim - 10-21-
locked preventing excessive force
44 03 Key Retracts Latch 8844 x ET_ 10-63-
from being applied to the horizontal #34 Cylinder Supplied 11-
11-21-
lever 11-60-
Freewheeling Trim -
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Key unlocks Trim, Trim retracts latch/ 11-63-
46 09 Trim relocks when key is removed 8846 x ET_ 11-64-
11-70-7P-
Electrified ET Trim #41 Cylinder Supplied 11-72-7P-
11-73-7P-
Electrified ET Trim - Fail Safe
Voltage must be specified for the 73 8873 x ET_
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
11-65-73-7P-
Power Off, Unlocks Lever (No Cylinder) 21-
following functions: 73, 74, 75 and 76. 22-
Specify: 12VDC or 24VDC Electrified ET Trim - Fail Secure
74 Power Off, Locks Lever (No Cylinder) 8874 x ET_ 51-
52-
60-
Electrified ET Trim - Fail Safe 63-
75 Power Off, Unlocks Lever, Key Retracts Latch 8875 x ET_ 64-
#34 Cylinder Supplied 70-
72-
Electrified ET Trim - Fail Secure 73-
76 Power Off, Locks Lever, Key Retracts Latch 8876 x ET_ 65-73-
#34 Cylinder Supplied 65-73-7P-
73-7P-
Note: Exit devices are available in all standard finishes, except 14, 15, 26 & 26D. With these finishes, exit devices are supplied in 32 81-
or 32D to match accordingly. 32 or 32D is automatically supplied when 26 or 26D is specified. For nickel finishes, specify 14/32 or 15/32D to 82-
receive nickel finished trims and stainless exit devices F1-82-
83-
Pull & Thumbpiece Trim Section Trim Designations Series F1-83-
84-
• Use three letter designations (Ex “PTB”) when ordering the BR-
Exit Device with trim LC-
*SC-
• Use the six digit designation (Ex “866-MAL”) when ordering *SE-
trim without an Exit Device, always specify finish * Options are not
available with 8816
** Only available with
15, 26D and 32D
Description & finishes
SARGENT ANSI
Function Cylinder Info. Available
Function 8800
Numbers (1-3/4" Door)
Numbers Panic & Fire Finishes
Night Latch 814- 814- 8804 x Trim SARGENT BHMA
04 03 Key Retracts Latch 814-FSL* 814-PSB* 814-STS 862 Pull
#34 Cylinder Supplied FSW* MSL* Designation Finishes Finishes
03 605
No O/S Operation or 8810 x Trim
10 02 810-FLL 810-FLW 810-MAL 810-PTB 810-STS 862 Pull 04 606
Cylinder (Pull Only) Designation 09 611
Passage Only 8828 x Trim 10 612
28 15 (No cylinder) 828-FLL 828-FLW 828-MAL 828-PTB 828-STS N/A Designation 10B 613
10BE 613E
Key Outside Unlocks/ 8863 x Trim 10BL 613L
63 05 Locks Thumbpiece 866-FLL 866-FLW 866-MAL 866-PTB 866-STS N/A Designation 14
#34 Cylinder Supplied 618
15 619
Key Outside Retracts Latch; 20D 624
8866 x Trim
66 07 866-FLL 866-FLW 866-MAL 866-PTB 866-STS N/A
Key Inside Unlocks/Locks 26 625
O/S Trim O/S #34 & I/S #44 Designation
26D 626
* FSL, FSW, MSL and PSB trims are used with (HC-& 12-) 8888 and 8804 only and are the same as FLL, FLW, MAL and PTB pulls except for cylinder hole located 3/8” 32 629
(9mm) lower. 32D 630
Note: Thumbpiece trims for 63 and 66 function devices are identical and are identified as 66 function when trim is ordered separately. BSP —
10/21
Note: FLW & FSW trims are not available in 32(629) or 32D(630).
Note: Pulls and thumb piece trims are not available in 14, 15, 26 or 26D. WSP
11
90641
1-800-727-5477 • www.sargentlock.com8900 Mortise Lock Exit Device
80 Series
8900 Features
8900 Series • Designed for standard width stile applications on wood and metal doors
Mortise Lock Exit Device • Concealed single point guarded latching for additional security
• Also available as a WS8900 for additional certifications and listings, see
Hurricane-Resistant section of this catalog
• Single door applications
• Double door applications with Vertical Rod
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed
Specifications for 8900 Mortise Lock Exit
Door Type Metal Doors
Door Thickness 1-3/4" (44mm) minimum thickness. For doors over 1-3/4" to 2 1/4" thick, specify thickness and order as 31-
Stile 4-1/2" (114mm) minimum stile width
Rail sizes as determined Rails are available in 4 sizes, use door width to determine size needed.
by door width Rails will be factory cut to size, if door width is supplied
• E Rail for 24" to 32" door widths, No cutting required for 32" door
• F Rail for 33" to 36" door widths, No cutting required for 36" door
• J Rail for 37" to 42" door widths, No cutting required for 42" door
• G Rail for 43" to 48" door widths, No cutting required for 48" door
Strike C908 Standard Black Nylon Coated – ANSI Prep A115.1
Optional Strikes – 815 Open Back Strike or 908 Flat Lipped Strike with Black Nylon
Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder
supplied)
Electric Options AL- Alarm
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
PL- SARGuide™ Photoluminescent Coated
TL- SARGuide™ Illuminated Touchpad
53- LX Latchbolt Monitor
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
54- Outside Lever Monitoring
55- Request-to-Exit Signal - Rail Monitoring
56- Remote Latch Retraction
57- Delay Egress & Electromagnets
58- Electric Dogging
59- Electroguard – Self Contained Delayed Egress
Mounting Fasteners Supplied standard with wood and machine screws
Available with through-bolts and mortise (sex) nuts
Latch Bolt Brass Nickel Plated, 3/4" (19mm) throw, anti-friction
Guarded/DeadLatch Brass Nickel Plated, sliding type
Device Centerline from 41" (1041 mm) for Standard Applications; 38" (965mm) for elementary schools
Finished Floor
Center Case 8-3/8" (213mm) x 2-5/8" (67mm)
Dimensions
Projection Pushbar Neutral – 3" (76mm)
Pushbar Depressed – 2-1/8" (54mm)
Fire Exit Hardware See Chart – Page 6
C908 Standard Strike Single Door 815 Open Back Strike
• Curved lip ANSI A-115.1
Trim
• Handed. 1-1/4" (32mm) lip standard
1-1/4" • Longer lips
(32mm) in increments
of 1/4" (6mm) 4-7/8" 3-3/8"
(124mm) (86mm)
through 2-7/8"
(73mm)
available
3-3/8" • Black nylon
coated
4-7/8" Pair of Doors
(86mm) (124mm)
1-1/4"
Trim
(32mm)
• ANSI A-115.14 Open Back
• Beveled 1/8" (3mm) in 2" (51mm)
1-1/4" • Specify hand of active door
(32mm) 3/32" • Black nylon coat
10/21
(2mm) 815 Open back strike;
Inactive door with vertical rods • “B” label
12
90641
1-800-727-5477 • www.sargentlock.com8900 Functions and Trims
80 Series
How to order: Options Series Function Rail Lgth Trim Hand Outside Finish Inside Finish Door Width
F1-83- 89 13 F ETL RHR 26 32 36"
Options
SARGENT ANSI ANSI Type 3 8900
Function Function Description & Cylinder Info 8900
700 Series ET Trim Numbers Numbers (1-3/4" Door) Panic & Fire Mechanical Options:
12-
16-
Exits with ET Trim, specify Night Latch 19-
lever design after the ET 04 03 Key Retracts Latch 8904 x ET_ 23-
designation (e.g., ETL) #46 Cylinder Supplied 31-
36-
Key unlocks Trim, Trim retracts Latch/ 37-
06 09 Trim relocks when key is removed 8906 x ET_ 43-
53-
#41 Cylinder Supplied 54-
55-
10 01 No outside operation (No Cylinder) 8910 56-
56-HK-
No outside operation (No Cylinder) 57-
10 02 ET Control is used as Pull Only 8910 x ET_ 58-
59-
BC-59-
Lever Designs for ET Controls Key Outside Unlocks/locks Trim 76-
13 08 #41 Cylinder Supplied 8913 x ET_ 85-
A, B, E, F, J, L, P, W 86-
87-
Also available with Coastal Series & AL-
Studio Collection Levers
15 14 Passage Only (No cylinder) 8915 x ET_ BT-
CPC-
Key Outside Retracts Latch; LD-
ET Designation with Suffix 16 10 Key Inside Unlocks/Locks O/S Trim 8916 x ET_ PL-
** SG-
(Used to order ET without device) O/S #46 & I/S #34 Cylinder Supplied TL-
Cylinder Options:
8900 Series: 704, 706, 710, 713, Freewheeling Trim - 10-
715, 716, 740, 743, 744, 773, 774, 40 02 No outside Operation 8940 x ET_ 10-21-
775 & 776 10-63-
(No Cylinder) Dummy Trim 11-
11-21-
Freewheeling Trim Freewheeling Trim - 11-60-
43 08 Key Outside Unlocks/locks Trim 8943 x ET_ 11-63-
The lever rotates when the door is #41 Cylinder Supplied
11-64-
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
11-70-7P-
locked preventing excessive force 11-72-7P-
from being applied to the horizontal Freewheeling Trim - 11-73-7P-
lever 44 03 Key Retracts Latch 8944 x ET_ 11-65-73-7P-
21-
For 1-3/4" Door #46 Cylinder Supplied 22-
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Electrified ET Trim and Electrified ET Trim - Fail Safe
51-
52-
Electrified Mortise Locks 75* Power Off, Unlocks Lever,
8975 x ET_ 60-
Key Retracts Latch 63-
Voltage must be specified for the For 1-3/4" Door #46 Cylinder Supplied 64-
following functions: 73, 74, 75 and 70-
Electrified ET Trim - Fail Secure 72-
76. Power Off, Locks Lever,
Specify: 12VDC or 24VDC
76** Key Retracts Latch 8976 x ET_ 73-
65-73-
For 1-3/4" Door #46 Cylinder Supplied 65-73-7P-
73-7P-
81-
Note: Exit devices are available in all standard finishes, except 14, 15, 26 & 26D. With these finishes, exit devices are 82-
supplied in 32 or 32D to match accordingly. 32 or 32D is automatically supplied when 26 or 26D is specified. For nickel F1-82-
finishes, specify 14/32 or 15/32D to receive nickel finished trims and stainless exit devices 83-
* 75 Function without cylinder is available as a 73 Function F1-83-
84-
** 76 Function without cylinder is available as a 74 Function BR-
LC-
*SC-
*SE-
Pull & Thumbpiece Trim Section Trim Designations
* Options are not
• Use three letter designations (Ex “PTB”) when ordering available with the
the Exit Device with trim following functions:
• Use the six digit designation (Ex “866-MAL”) when 04 x ET, 16, 44,
ordering trim without an Exit Device, always specify finish Series 75 & 76
& hand ** Only available with
15, 26D and 32D
finishes
SARGENT ANSI Description & Cylinder Info. Available
Function Function (1-3/4" Door) Finishes
Numbers Numbers 8900 Panic & Fire SARGENT BHMA
Finishes Finishes
Night Latch-Key Retracts Latch 8904 x Trim
04 03 #41 Cylinder Supplied 814-FLL 814-FLW 814-MAL 814-PTB 814-STS
Designation 03 605
04 606
No O/S Operation or Cylinder 8910 x Trim 611
10 02 (Pull Only) 810-FLL 810-FLW 810-MAL 810-PTB 810-STS 09
Designation 10 612
Passage Only 8928 x Trim 10B 613
28 15 (No cylinder) 828-FLL 828-FLW 828-MAL 828-PTB 828-STS 10BE 613E
Designation 613L
10BL
Key Outside Unlocks/locks Thumbpiece 8963 x Trim 14 618
63 05 #41 Cylinder Supplied 866-FLL 866-FLW 866-MAL 866-PTB 866-STS 15 619
Designation
20D 624
KeyOutside Retracts Latch;
8966 x Trim 26 625
66 07 Key Inside Unlocks/Locks Trim; 866-FLL 866-FLW 866-MAL 866-PTB 866-STS 626
O/S #34 & I/S #41 Cylinder Supplied Designation 26D
32 629
Note: Thumbpiece trims for 63 and 66 function devices are identical and are identified as 66 function when trim is ordered separately. 630
Note: FLW trim is not available in 32(629) or 32D(630). 32D
BSP —
10/21
Note: Thumbpiece trims used with 8900 mortise lock exit devices are handed.
Note: Pulls and thumb piece trims are not available in 14, 15, 26 or 26D. WSP
13
90641
1-800-727-5477 • www.sargentlock.com8700 Surface Vertical Rod Exit Device
80 Series
Features 646 Top Strike
8700 Series • Two point latching (top & bottom with
Surface Vertical Rod Exit Device adjustability through center case) • Standard for both Panic &
• Standard bottom latch compatible with latch track Fire (12-) Hardware
thresholds (by others) • Surface applied to frame
• Single and double door applications • Black nylon coated
• ANSI/BHMA A156.3 - Grade 1
• UL10C (Fire) and UL305 (Panic) Listed • Replaces 629 Strike
• Also available as HC8700 for hurricane-resistant 1-5/32"
(29mm)
applications, see Hurricane-Resistant section of 3/4"
(19mm) 1/4"
this catalog (6mm)
• Also available as FM8700, use with StormPro
Series doors, frames and hinges is required when
used as a certified tornado solution. For tornado-
resistant applications, see Tornado-Resistant 3-11/16"
section of this catalog (94mm)
• Rods are 1/2" (13mm) brass, bronze or stainless
steel
Note: The 8700 Exit Device can not be used less bottom rod. If less
Specifications for 8700 Series Exit bottom rod is desired, specify NB8700 Series Exit Device
Door Type Wood or metal doors
Door Thickness 1-3/4" (44mm) minimum thickness. For doors over 1-3/4" to 2-1/4" thick, 624 Bottom Strike
specify thickness and order as 31-
Stile 4-1/2" (114mm) minimum stile width with trim and 3-1/2" (44mm) minimum • Standard for 8700
stile without trim • Applied to surface of
Rail sizes as Rails are available in 4 sizes, use door width to determine size needed. floor or to a flat threshold
determined Rails will be factory cut to size, if door width is supplied • Black nylon coated
by door width • E Rail for 24" to 32" door widths, No cutting required for 32" door
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
• F Rail for 33" to 36" door widths, No cutting required for 36" door
• J Rail for 37" to 42" door widths, No cutting required for 42" door
• G Rail for 43" to 48" door widths, No cutting required for 48" door
2-1/2"
Strike 646 Top Strike (Panic and Fire Rated)
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
(64mm)
624 Bottom Strike; 655 Fire Rated Bottom Strike
Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder
dogging (#41 cylinder supplied)
Electric Options AL- Alarm 9/16" 3/8"
(14mm) (10mm)
PL- SARGuide™ Photoluminescent Coated
TL- SARGuide™ Illuminated Touchpad
53- LX Latchbolt Monitor
54- Outside Lever Monitoring
55- Request-to-Exit Signal - Rail Monitoring 655 Bottom Strike
56- ELR Remote Latch Retraction
57- Delay Egress & Electromagnets • Standard for 12-8700 and
58- Electric Dogging 14-8700
59- Electroguard – Self Contained Delayed Egress
• Stainless steel
Mounting Fasteners Supplied standard with wood and machine screws
Available with through-bolts and mortise (sex) nuts • Black nylon coated
Top & Bottom Bolt Brass, Stainless steel • Replaces 647 Strike
Device Centerline from 41" (1041 mm) for Standard Applications; 38" (965mm) for elementary 2-3/4"
(70mm)
schools
Door/Opening Height Must be specified - 120" (3048mm) Max Door Opening - Non-fire rated
doors
96" (2438mm) Max Door Opening - Fire rated doors
1-13/16"
Center Case Dimensions 8-3/8" (213mm) x 2-5/8" (67mm) (46mm)
Projection Pushbar Neutral – 3" (76mm)
Pushbar Depressed – 2-1/8" (54mm)
Fire Exit Hardware See Chart – Page 6
Inside Lever Assembly 648 & 653 Strikes (Alternate Strikes for 8700 SVR Devices)
for 300 Series Aux Control
Attaches to top rod and
648 Strike 653 Strike
engages with 300 Series For doors having 7/16" 1 7/8" Alternate for 12-8700
transom panel (11mm) (48mm) 1-3/4"
Auxiliary Control. Packed (44mm)
applications
standard with 306 and 313
1/2'
Auxiliary Controls Black nylon coated (13mm)
2-1/2" 2-5/16"
Part # 97-2378 (64mm) 2-1/8" 2-3/4" (59mm)
1-1/8" (54mm) (70mm)
Black nylon
(29mm)
10/21
Note: 26 or 26D is automatically supplied when 32 or 32D is specified. coated
14
90641
1-800-727-5477 • www.sargentlock.com8700 Functions and Trims
80 Series
How to order:
Options Series Function Rail Lgth Trim Hand Outside Finish Inside Finish Door Width Door Height AFF
F1-83- 87 13 F ETL RHR 32D 10B 36" 84" 41"
SARGENT ANSI ANSI Type 2
700 Series ET Trim
Function Function Description & Cylinder Info. 8700 Options
Exits with ET Trim, specify
lever design after the ET Numbers Numbers (1-3/4" Door) Panic & Fire 8700
designation (e.g., ETL) Key unlocks Trim, Trim retracts latch/
06 09 Trim relocks when key is removed 8706 x ET_ Mechanical Options:
#41 Cylinder Supplied 12-
14-
10 01 No outside operation (No Cylinder)* 8710 16-
19-
31-
No outside operation (No Cylinder)*
10 02 ET Control is used as Pull Only 8710 x ET_ 36-
37-
43-
Key Outside Unlocks/locks Trim 53-
13 08 8713 x ET_
Lever Designs for ET Controls #41 Cylinder Supplied 54-
55-
A, B, E, F, J, L, P, W 56-
15 14 Passage Only (No cylinder) 8715 x ET_ 56-HK-
Also available with Coastal Series & 57-
Studio Collection Levers Freewheeling Trim - 58-
40 02 No outside Operation (No Cylinder)* Dummy Trim 8740 x ET_ 59-
BC-59-
ET Designation with Suffix 76-
Freewheeling Trim - 85-
(Used to order ET without device)
43 08 Key Outside Unlocks/locks Trim 8743 x ET_ 86-
8700 Series: 706, 710, 713, 715, 740, #41 Cylinder Supplied 87-
AL-
743, 744, 746, 773 & 774 BT-
Freewheeling Trim -
CPC-
46 09 Key unlocks Trim, Trim retracts latch/ 8746 x ET_
Freewheeling Trim relocks when key is removed #41 Cylinder Supplied
LD-
PL-
The lever rotates when the door is *SG-
Electrified ET Trim - Fail Safe
locked preventing excessive force 73 Power Off, Unlocks Lever (No Cylinder)* 8773 x ET_ TB-
TL-
from being applied to the horizontal Cylinder Options:
lever. Electrified ET Trim - Fail Secure 10-
74 Power Off, Locks Lever (No Cylinder)* 8774 x ET_ 10-21-
Copyright © 1998-2021, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written
Electrified ET Trim 10-63-
Note: Exit devices are available in all standard finishes, except 14, 15, 26 & 26D. With these finishes, exit devices are supplied 11-
Voltage must be specified for the in 32 or 32D to match accordingly. 32 or 32D is automatically supplied when 26 or 26D is specified. For nickel finishes, specify 11-21-
following functions: 73 and 74. 14/32 or 15/32D to receive nickel finished trims and stainless exit devices. 11-60-
11-63-
Specify: 12VDC or 24VDC Note: AFF means Above Finished Floor, center line of rail Above Finished Floor
permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
11-64-
* Cylinder Override is available with a 306 Aux Control 11-70-7P-
Example Order: 8773F 12V x ETMG x 306 x RHR x 32D x 36"w x 84"h 11-72-7P-
11-73-7P-
11-65-73-7P-
21-
SARGENT ANSI 22-
300 Series++ Function Function Description & Cylinder Info. 8700 51-
52-
Auxiliary Control & 862 Pull Numbers Numbers (1-3/4" Door) Panic & Fire 60-
63-
Key unlocks Turn; Turn retracts latch/ 64-
06 12 Turn relocks when key is removed 8710 x 306 70-
#41 Cylinder Supplied 72-
73-
862 Pull Only 65-73-
10 02 (Optional Pulls: 863 & 864) 8710 x 862 65-73-7P-
73-7P-
300 Series Key Outside Unlocks/locks Turn 81-
Aux. Control 862 Pull 13 11 #41 Cylinder Supplied 8710 x 313 82-
F1-82-
83-
Note: When ordering 8700 Series Exit Device x 300 Series Aux. Control, specify 10 Function for the exit. Example: 8710F x 306 x RHR x 32D x 42" x 90" F1-83-
84-
BR-
Pull & Thumbpiece Trim Section Trim Designations LC-
• Use three letter designations (Ex “PTB”) when ordering SC-
the Exit Device with trim SE-
• Use the six digit designation (Ex “866-MAL”) when * Only available with
ordering trim without an Exit Device, always specify finish 15, 26D and 32D
finishes
Available
SARGENT ANSI Finishes
Function Function Description & Cylinder SARGENT BHMA
8700 Finishes
Numbers Numbers Info. (1-3/4" Door) Panic & Fire
Finishes
Pull Only 8710 x Trim 03 605
10 02 (No Cylinder)* 810-FLL 810-FLW 810-MAL 810-PTB 810-STS 04 606
Designation 09 611
Passage Only 8728 x Trim 10 612
28 15 (No cylinder) 828-FLL 828-FLW 828-MAL 828-PTB 828-STS 613
Designation 10B
Key unlocks Thumbpiece, 10BE 613E
Thumbpiece retracts latch/ 8762 x Trim 10BL 613L
62 06 Thumbpiece relocks when key is 866-FLL 866-FLW 866-MAL 866-PTB 866-STS 14 618
removed #34 Cylinder Supplied
Designation
15 619
Key Outside Unlocks/ 20D 624
8763 x Trim 26 625
63 05 locks Thumbpiece 866-FLL 866-FLW 866-MAL 866-PTB 866-STS
#34 Cylinder Supplied Designation 26D 626
* Cylinder Override is available with a 306 Aux Control. 32 629
Note: Thumbpiece trims for 62 and 63 function devices are identical and are identified as 66 function when trim is ordered separately. 32D 630
10/21
Note: FLW trim is not available in 32(629) or 32D(630). BSP —
Note: Pulls and thumb piece trims are not available in 14, 15, 26 or 26D.
WSP
15
90641
1-800-727-5477 • www.sargentlock.comYou can also read
