2021 Product Promotion - powered by - BRINKO Werkzeuge
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
EN
io on
rn oti
na
l
Product Promotion
2021
In om
at
Pr
te
powered by
HAUPA + BRINKO
Good News for the Heating & Plumbing
and HVAC Industry
The acquisition of BRINKO Werkzeuge Fellermann (now renamed BRINKO)
by the HAUPA Group on 01.01.2020 opens completely new perspectives
for the entire heating & plumbing and electrical wholesale business.
Our portfolio for each of these wholesale areas will be extended by a
comprehensive product spectrum.
Both companies HAUPA and BRINKO have a very traditional, family run
background. BRINKO with its 160 years of experience in the field of
heating & plumbing tools is firmly rooted in Remscheid, the center of the
tool industry in Germany, as is HAUPA with 60 years of successful
business with our extensive range of tools for electrical installations and
cable connection technology.
The merger of the two companies and the associated competencies and
synergy effects will open completely new avenues for the heating &
plumbing and electrical industry.
HAUPA + BRINKO are your partners for reliable, innovative and
future-oriented collaborations.
+
++
2 Prices on request. Errors and technical changes reserved.
... even stronger together
+
Everything from a single source.
160 years of experience + 60 years of tradition –
Outstanding tools are in our genes.
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 3
619 Corner pipe pliers
• Chrome vanadium steel, forged
• special hardened teeth
• S-opening, polished
• finger pinch protection
Art. No. lenght mm span width mm for pipes
619/1 320 49 1"
619/1 1/2 440 68 1 1/2"
BRINKO Highlights 2021
... Product actions sanitary
687 Water pump pliers
• Chrome vanadium steel
• special hardened teeth for extra long life
• inox push button & spin
• self locking on pipes and nuts
• with finger pinch protection
• with press-button single hand adjustment Art. No. lenght mm
• burner hole, nose brightly polished 687/150 150
• handle yellow dip insulated coating
• automatic jaw width adjustment, with 687/180 180
push-button single hand adjustor 687/250 250
• 11 times grid precision adjustment
687/300 300
4 Prices on request. Errors and technical changes reserved.
682 Water pump pliers automatic
• Chrome vanadium steel
• special hardened teeth
• self locking on pipes and
nuts
• burner hole
• nose brightly polished
• plastic-coated handles, yellow
• automatic jaw width adjustment
bysimply sliping handles together,
without snap adjustment
• with finger pinch protection
• patented technology
Art. No. lenght mm
682/250 250
689 Fitting pliers
• Chrome vanadium steel,
matt chrome-plated
• automatic jaw width adjustment, with
push-button single hand adjustor
• with finger pinch protection, a parallel
gripping and a moving jaw
• smooth, polished gripping surfaces
• handle yellow dip insulated
• 10 times hand force
• replaces open-end wrench set
Art. No. lenght mm
689/180 180
689/240 240
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 5
9001 Pipe pliers set
Consisting of:
1 corner pipe pliers 1“ Art. no. 619/1
1 corner pipe pliers 1 1/2“
Art. no. 619/11/2
1 water pump pliers 240 mm Art. no. 680
• corner pipe pliers with S-opening and finger pinch protection
• special hardened teeth
111/2 Hex key set | 7 pieces
• 7 pieces: 2.5, 3, 4, 5, 6, 8, 10 mm
• Chrome vanadium steel, polished
nickel-plated
• the ball-end allows you to screw up to a 30° angle
• in a practical, strong fold-out holder with lifting button
6 Prices on request. Errors and technical changes reserved.
110 Hex key set TX | 9 pieces
• 9 pieces: Tx 10, 15, 20, 25, 27, 30, 40, 45, 50
• Chrome vanadium steel, bright nickel-plated
• long design, even easy to reach greatly recessed
screws
• unfolding plastic holder allows free access
115/2 Hex key set | pieces
SCREWDRIVER-HNADLE
T-HANDLE
• 9 pieces: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
• Chrome vanadium steel, bright nickel-plated
• hex head/ball-end combined
• the ball-end allows you to drive a screw at up
to a 30° angle
• in a strong plastic holder
• practical removable handle to work comfortably -
as T- or angled handle or screwdriver ANGLED HANDLE
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 7
2122 Screwdriver set
• 6 pieces:
4 slot-head screwdrivers 80 x 3, 100 x 4,
125 x 5.5, 150 x 6.5 mm
2 cross-head screwdrivers PZ 1, PZ 2
• chrome vanadium steel
• matt chrome-plated blades
• ergonomic octagonal curved 2-component
handle with a hole
2126/7 VDE screwdriver set
• 7 pieces, 1000 V:
4 VDE slot-head screwdrivers
75 x 2.5, 100 x 4, 125 x 5.5, 150 x 6.5 mm
2 VDE cross-head screwdrivers PZ 1, PZ 2
1 safety voltage tester 150 - 250 Volt
(GS- certified)
• chrome vanadium steel
• matt chrome-plated blades with protective
insulation
• ergonomic octagonal curved 2-component
hand with a hole
individually tested, VDE standard
IEC900(CO)11, VDE680 part 201
(IEC78 - German translation of
IEC900)
8 Prices on request. Errors and technical changes reserved.
2128 Impact screwdriver set
2 K impact screwdrivers, flat slot and cross slot PH
with hexagonal shaft for key attachment
with continuous blade and impact plate for direct
impact transmission from plate to tip
6 pieces:
• 4 impact screwdrivers flat slotted in CV steel
75 x 3.5 mm SW 8 | 90 x 4.5 mm SW 8 |
100 x 5.5 mm SW 8 | 125 x 6.5 mm SW 10
• 2 cross recessed impact screwdrivers MoV steel
PH1 SW 8 - PH2 SW 10
2036 Tx screwdriver set
6 pieces:
• Tx screwdrivers with a centre hole
STX 10 - 15 - 20 - 25 - 30 - 40
• chrome vanadium steel
• matt chrome-plated blades
• black tips
• ergonomic octagonal curved 2-component
handles with a hole
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 9
677-1 Bath installation set „deluxe“ | 16 pieces
Scope of supply in case,
16-part set:
• s-bend connector assembly
tool, ¾“
• sorner valve screwing aid
• sniversal screw bit up to 21 mm
• valve holder for eccentric and
standard valves
• WC seat assembly wrench
• ratchet wrench, 4 in 1
• combination basin cock wrench
13 mm with 5 bits 9, 10, 11, 12,
14 mm and 1 claw
• deep hole marker for all surfaces
• reversible ratchet, ½“, CV steel,
with internal and external square
drive bit
• hanger bolt screwdriver Ø 10 mm
725 Valve
725 Valve holder
• to lock eccentric and standard valves in place,
when installing siphons and drains, on washbasins
and sinks etc.
• with a flexible T-handle
• length 120 mm
10 Prices on request. Errors and technical changes reserved.128 Universal screw insert 659 Angle valve screw-in aid
• Chrome vanadium steel, chrome-plated • to screw angle vales in and out without causing any
• 1/2“ drive size 22 mm damage
• the steel pins automatically adjust to every shape • also suitable for places which are difficult to access
from Ø 9 – 21 mm • inside diameter 32 mm
• also suitable for rounded or damaged shapes • square socket for 1/2“ drive
• Caution: not suitable for impact wrenches!
676 S-connection assembly tool 661 WC seat installation wrench
• inserting and removing tool • simple to install and remove WC seats
• turns to left and right • universal bung wrench with more than 19 possible
• wear-resistant rollers applictions suitable for virtually all fastening systems
• square socket for 1/2“ drive • thanks to cardan joint, optimal leverage
• for all common S-connectors with 3/4“ thread • no annoying retightening required
655 Combination washbasin tap wrench
• for all fittings up to 14 mm, size 32 mm
• 4 inserts in shank: 9, 10, 11, 12, 13 mm
• switchable claw with spring
• knurled handle
• sizes 8 and 14 mm on request
Art. No. 655-1/8 and 655-1/14
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 111088 Sleeve extractor set
For the extraction of threaded pipe
connections, sleeves and nipples
• screw extractor extract left
• the extractor service life varies depending
on the hardness of the counter material
• the tools are intended for single use when
dealing with a mating material that displays
a certain level of hardness
• material: CrV-steel, hardened
• surface: Bronzed, polished cutting surface
Supplied in a stable case, 5 piece set:
• 1 sleeve extractor 3/8“
• 1 sleeve extractor 1/2“ – 3/4“
• 1 hexagonal insert 1/2“, size 26
• 1 hexagonal insert 1/2“, size 19
• 1 reversible ratchet, inner and outer square
drive bit, 1/2“ drive
1 2
1087 Sleeve extractor
Sleeve extractor 3/8“
Art. No. 1087/5
Sleeve extractor 1/2“ – 3/4“
Art. No. 1087/7
Art. No. Ø per inch
1087/5 3/8“
1087/7 1/2“ – 3/4“
12 Prices on request. Errors and technical changes reserved.2139 Wheel ratchet for bits
Easy to handle in tight spaces
• wheel for bits
• incl. magnet
• supplied with extension
(Bits are not included)
LOOSEN ... TIGHTEN ...
2145 Bit set | 32 pieces | colour-coded
Supplied in a plastic box with a belt clip
• S2 steel, chrome-plated with color coding
• 32 pieces:
1 bit holder with quick release and magnet
1 adaptor for ¼“
30 bits
Inhalt Colour Size Pieces
Cross-head PH PH Gr. 1, 2, 2, 3 4
Cross-head PZ PZ Gr. 1, 2, 2, 3 4
Slot-head 3, 4, 5, 6 mm 4
Allen 3, 4, 5, 6 mm 4
Tx Tx 10, 15, 20, 25, 27, 30, 40 7
Tx with hole STx 10, 15, 20, 25, 27, 30, 40 7
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 1383 Ratchet wrenches 4 in 1
4 in 1
The ratchet wrench handles 4 different nut sizes
• Sizes: 10 x 13 mm and 17 x 19 mm
• finely toothed 72 teeth of the 2 ratchets – ratchets can
be switched to clockwise/counterclockwise operation
• due to 12-slided toothing, the wrench easily grips
4, 6 and 12-sided screws as well as almost round nuts
• Chrome-vanadium steel, chrome-plated
• extremely robust
102 Hanger bolt driver
Multidirectional hanger bolt driver
• Screw-in and screw-out tool hanger bolt driver
Ø 8 mm and Ø 10 mm
• self-clamping when turned
• for fast and effortless screwing and unscrewing of
stay bolts, express and hanger bolts without
damaging the thread
• with hexagonal drive for power tools
Art. No. for thread Ø Multidirectional hanger bolt
102/8 8 mm driver Ø 8 mm and Ø 10 mm
102/10 10 mm
101/10 Hanger bolt nut
Hanger bolt nut Ø 10 mm
• universal attachment for all ½“ ratchet
• right and left turn
• for fast and effortless screwing and unscrewing of stay bolts,
express and hanger bolts without damaging the thread
• with inside square
14 Prices on request. Errors and technical changes reserved.674 Step wrench set
• 1 reversible ratchet Art. no. 672/265
• 1 step wrench, 105 mm
Art. no. 673/105
• supplied in DIY pouch
129-30 Torque wrench
Automatic with advance setting
• reversible ratchet with 1/4“ drive
• 3 inserts: 6, 8, 10 mm
• t he main scale (engraving) is on the wrench
• t he values increase in steps of 2 Nm each
from 6 – 30 Nm
• t he ring scale for fine settings is located
on the rotating handle
• t he lines for the in-between values each
correspond to 0.2 Nm
2142 Bit holder
• Chrome vanadium steel
• matt chrome-plated blade, length 350 mm
• ergonomic, octagonal curved
2 component handle with a hole
• with magnet and circlip
• suitable for all bit inserts 1/4“
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 15127-1 Socket wrench set „BRImultiLock“ 87 pieces
• Supplied in plastic case, 87 pieces
• chrome vanadium steel, chrome-plated
• twelve-tooth profile, 1/2“ and 1/4“ drive
Content Sizes
Plumber Ratchets 1/4", 1/2"
Universal joint 1/4", 1/2"
Spinner Handle
1/4", 150 mm
incl. adapter
Sliding T Bar 1/4", 150 mm
Extension Bar 1/4", 50 - 100 mm
Extension Bar 1/2", 125 - 250 mm
Plug Sockets 1/2", 16 - 21 mm
Bit Adapter 1/2" - 5/16"
Content Sizes
BRImultiLock Socket SW 10 - 12 - 13 - 15 - 16 - 17 - 18 - 19 -
1/2" 20 - 21 - 22 - 24 - 27 - 30 - 32 mm
Deep Socket
SW 14 - 15 - 17 - 19 mm
1/2"
BRImultiLock Socket SW 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 -
BRImultiLock
1/4" 11 - 12 - 13 - 14 mm
Deep Socket
SW 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
1/4"
Bits, slot 1/4" 4 - 5.5 - 6.5 mm
Bits, cross slot 1/4" PH 1, 2 | PZ 1, 2
Bits, allen key 1/4" 3 - 4 - 5 - 6 mm
Bits, Tx 1/4" Tx 8 - 10 - 15 - 20 - 25 - 30
lver!
Bit Adapter 1/4 - 5/16"
m s o
r o b l e lt iL o c k “
Bits, slot 5/16" 8 - 10 - 12 mm
Bits, cross slot 5/16" PH 3, 4 | PZ 3, 4 P K
Im u
O „B R w is t e d
B R I N ,t
Bits, allen key 5/16" 8 - 10 - 12 - 14 mm
m ag e d ws
f o r da h e a d s c r e
Bits, Tx 5/16" Tx 40 - 45 - 50 - 55 o n
h e x ag
16 Prices on request. Errors and technical changes reserved.122 Socket wrench set „BRImultiLock“ 55 pieces
• Supplied in a plastic case, 55 pieces
• chrome vanadium steel, chrome-plated
• twelve-tooth profile, 1/4“ drive
BRImultiLock
Content Sizes
Plumber Ratchets 1/4"
Universal joint 1/4"
Sliding T Bar 1/4"
Spinner Handle incl.
1/4", 150 mm
adapter
Hex keys 1,5 - 2,0 - 2,5
Extension Bar 1/4", 50 - 100 mm
BRImultiLock SW 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 -
Socket 1/4" 10 - 11 - 12 - 13 - 14 mm
Deep Socket 1/4" SW 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 mm
Bits, cross slot 1/4" PH 1, 2, 3 | PZ 1, 2, 3
lver!
Bits, Tx-E Bits 1/4" E4-5-6-7-8
m s o
r o b l e lt iL o c k “
Bits, slot 1/4" 4 - 5.5 - 7 mm
Bits, allen key 1/4" 3 - 4 - 5 - 6 - 7 mm P K O
u
„B R Im is t e d
BR I N tw
ag e d , c r e w s
Bits, Tx 1/4" Tx 8 - 10 - 15 - 20 - 25 - 27 - 30 - 40
r d a m
fo ds
e x a g o n h ea
h
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 17110902 „Flex“ hinged ratchet combination wrench set
8 pieces WS 8 – 19 mm
• hinged ratchet combination wrench
set made of chrome vanadium steel
• chromium plated surface, polished
• fine-toothed, 72 teeth
• with
with hinge
• 180° swivelling head
DIN 3113 ISO 3318
• inIn
inIn a practical plastic box with
metal catch
Content:
Wrench sizes
8 - 9 - 10 - 12 - 13 - 14 - 17 - 19 mm
360° | 110902
18 Prices on request. Errors and technical changes reserved.104020-1 Ratchet screwdriver set „FlexBag“
With 50 mm S2 bits and reduced shank
• ratchet screwdriver with right/left hand motion
• adjustable operating angle of 180°
• safety
safety and special bit set - top quality S2!
• the
t he screwing grasp also Quick change penholder
and 2-components Handle provides for anti-slip
and fatiguefree working
• the ergonomic form and the soft zones within the
pressure area range make a relaxed possible screws
• with
with hanging hole
Content:
¼“ 50 mm Power bits Tx:
T5, T6, T7, T8, T9, T10, T15, T20, T25, T30, T40
¼“ 50 mm Power bits Hex: H2 - H2.5 - H3 - H4 - H5 - H6
¼“ 50 mm Power bits PH: 0 - 1 - 2 - 3
¼“ 50 mm Power bits PZ: 0 - 1 - 2 - 3
¼“ 50 mm Power bits flach: 3 - 4 - 5 - 6 - 7 - 8
¼“ 50 mm Power bits SQ: 0, 1, 2, 3
¼“ 50 mm Power bits Tri-Wing: 1 - 2 - 3
¼“ 50 mm Power bits PZ/FL 1 & 2
above bits are in reduced shank except T40, H6, flat:
6 - 7 - 8 in full hex shank
2 pcs. adapters: ¼“ 50 mm, ¼“ 80 mm
8 pcs. sockets: 5 - 5.5 - 6 - 7 - 8 - 10 - 12 - 13
1 pc of „FlexPlus“ ratcheting driver
Video 104020
reduced
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 192513 DRY Profi
Effective pressing mechanism for automatic lead propulsion in robust stainless steel tube
• easy one-handed operation thanks to improved clip
• integrated sharpener with guide – for fast sharpening at any time
• leads can be replenished from the front or back
• for all surfaces (wood, metal, glass, ceramics …)
• special graphite lead included can be wiped off smooth surfaces with a damp cloth
• separately available coloured leads, water soluble or waterproof, vailable in colour
sets or individual colours for versatile use on light and dark backgrounds
2514 DRY Profi LED
Integrated LED lamp for precise
markings in poorly-lit areas
• immediately
immediately ready to use thanks to already included
batteries, 3 x 1.5 V – LR 41 replaceable batteries
• easy-to-use pushbutton ideally placed in the grip
area of the marker
• effective pressing mechanism for automatic lead
propulsion in robust stainless steel tube
• easy single-handed operation thanks to improved
clip
• integrated sharpener with guide for fast sharpening
at any time
• leads can be replenished from the front or back
• for all surfaces (wood, metal, glass, ceramics … )
• special graphite lead included can be wiped off
smooth surfaces with a damp cloth
• separately available coloured leads, water-soluble
or waterproof Available in colour sets or individual
colours for versatile use on light and dark
backgrounds
20 Prices on request. Errors and technical changes reserved.2980 Universal knife 2982 Blade dispenser
„Black Blades“
r i g inailf“e
e O er k n
„ThINKO cutt
BR
i g i nal“lades“
„Or ack B
B l
KO „
BR IN
• ergonomic 2-component handle with soft plastic • 10 strips of „Black Blades“
• blade feed with automatic lock • super-sharp, reinforced design
• 2 extra blade strips in the handle • width 18 mm, thickness 0.5 mm
• suitable for universal knife Art. no. 2980
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 213740 Pipe inspection camera
Inspection system for pipes, sewers, and house connections
BASIC CONFIGURATION
• STANDARD Ø 26 mm camera head
• self-levelling
self-levelling
• with
with integrated 512 Hz transmitter
• STANDARD Ø 6 mm camera cable | length 60 m
• incl.
incl. frame and digital metre counter
• 10-inch TFT monitor
• digital
digital recording function on USB/SD (video,
dictation function)
• text
text processing function
• watertight
watertight ABS outdoor case
• measuring
measuring range/area of application DN 50 – 125
3750 SMALL camera head set
Small Ø 13.5 mm camera head, suitable for inspection
system for pipe, sewer, and house connections
• SMALL Ø 13.5 mm camera head
• SMALL Ø 4.5 mm camera cable | length 10 m
• incl. reel and metre counter
• measuring range/area of application DN 10 – 50
Only to be used in connection with the pipe inspections
camera set Art. no. 3740 (basic equipment)!
22 Prices on request. Errors and technical changes reserved.3760 SWIVEL-MOUNTED camera head set
Swivel-mounted Ø 60 mm camera head suitable for inspection
system for pipe, sewer, and house connections
• SWIVEL-MOUNTED Ø 60 mm camera head
• Swivel range 360°/180°
• with integrated 512 Hz transmitter
• SWIVEL-MOUNTED Ø 9 mm camera cable | length 60 m
• incl. frame and metre counter
• measuring range/area of application DN 70 – 450
Only to be used in connection with the pipe inspections
camera set Art. no. 3740 (basic equipment)!
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 23– 100 mm
3730 Water pressure drain cleaner
Ingeniously removes blockages in drainpipes
with high pressure water
Ø 16 mm | ¹/₂"
• for pipes Ø 40 – 150 mm
• including 1.5 m hose with adaptor, hose
connection 1/2“ x 3/4“ IG
• patented pressure balloon
Only suitable for water pressure.
r
1,5 m
Ø 35 mm Ø 40 – 100 mm
Ø 35 mm Ø 40 – 100 mm
Art. No. Pipe Ø mm Balloon Ø mm
3730/1 40 – 80 35
3730/2 80 – 150 76
Ø 16 mm | ¹/₂"
4 6 Ø 16 mm | ¹/₂"
Ø 35/76 mm Ø 40 – 150 mm Ø 35/76 mm Ø 40 – 150 mm
2 8 4 6
0 10 2 8
bar
0 10
< 4 bar bar
=
1,5 m
< 4 bar
=
1,5 m
Ø 16 mm | ¹/₂"
4 6 4 6
3800-1 Sealing balloon 2 8 2 8
0 10 0 10
bar bar
< 4 bar < 4 bar
= =
1,5 m
Art. No. Application Length
pipe Ø mm mm
3800-1/1 30 – 50 140
Pneumatic sealing system for various pipe diameters 3800-1/2 50 – 80 135
• easily seal pipes
3800-1/3 70 – 100 120
• insert, inflate, work
• suitable for compressed air hose Art. no. 3800-2 3800-1/4 90 – 150 230
und zur Luftpumpe mit Manometer Art. No. 3800-3
24 Prices on request. Errors and technical changes reserved.3800-2 Compressed air hose 3800-3 Air pump with manometer
Extension hose for sealing bubbles • suitable for sealing bubbles
• to regulate the pressure outside of the danger zone Art. no. 3800-1
• length 3 m
3806 Plug for inner pipe 3805 Plug for end pipe
• for unpressurized lines, seals only in the inner tube, • for unpressurized lines, seals only at the pipe end,
can be placed as required does not fall into the inner pipe
Art. No. Application pipe Maximum Counter Art. No. Application pipe Maximum Counter
Ø mm Pressure bar* Ø mm Pressure bar*
3806/1 96 – 103 1.2 * 12 m * 3805/1 39 – 42 1.2 * 12 m *
3806/2 147 – 154 1.2 * 12 m * 3805/2 49 – 55 1.2 * 12 m *
3806/3 196 – 204 1.2 * 12 m * 3805/3 71 – 79 1.2 * 12 m *
3805/4 96 – 103 1.2 * 12 m *
* bar corresponds to a 12 m water column 3805/5 147 – 154 1.2 * 12 m *
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 25633-70/35 Carbon steel, stainless 622/28 Ratchet cut | stainless steel,
steel pipe cutter carbon steel
Special pipe cutter for stainless Problem-solver for pipes that are already
steel, carbon steel and copper pipes installed
• pipes with Ø 3 – 35 mm or 1“, with 3 mm • specially for cutting stainless steel, carbon steel
wall thickness and copper pipe, Ø 8 – 28 mm
• 1 stainless steel cutting wheel with high quality • the fine ratchet functions makes it easy to cut the
needle bearing Art. no. 633-75 pipes
• easy to separate hard pipes thanks to ball bearing • easy to adjust the spindle
4-roller guide, fast running spindle, extra strong • replacement cutting wheel Art. no. 622-1
• integrated rotational deburrer
• replacement cutting wheel Art. no. 633-75
633-75 Cutting wheel stainless 622-1 Cutting wheel | stainless
steel, carbon steel steel, carbon steel
• suitable for carbon steel, stainless steel • suitable for ratchet cut | stainless steel,
pipe cutter Art. No. 633-70/35 carbon steel Art. No. 622/28
• wheel with needle bearing
635 Plastic pipe shears 634/35 Plastic pipe shears
With leverage transfer For one-hand operation with
• for plastic pipes (with up to 2 mm automatic blade retraction
wall thickness) and composite pipes • Ø 6 – 35 mm, for separating hard and
• Blades Art. No. 635-10/35 | 635-10/42 soft plastic pipes, cable ducts,
fibre-reinforced plastic and rubber
Art. No. For pipes Ø mm hoses, pipes made of composite material and
635/35 to 35 polypropylene
• straight and distortion-free, right angles cuts
635/42 to 42 • Blade Art. No. 634-1/35
26 Prices on request. Errors and technical changes reserved.633 Pipe cutter with deburrer 627 Combination pipe cutter
One for all!
With extra strong fast running spindle For pipes Ø 6 – 76 mm, 1/4 – 2 1/2“
• 4-roller guide with groove for beading • rapid spindle adjustment
• integrated rotation deburrer • 1 cutting wheel for plastic and composite pipe,
• 1 cutting wheel for stainless steel, copper and brass
hard plastic pipe (up to 2 mm), Art. no. 627-1
pipes, Art. no. 632-1
• 1 cutting wheel for stainless steel, copper and brass
• 1 cutting wheel for plastic and composite pipes,
Art. no. 633-1 (only integrated in the handle of pipes, Art. no. 627-2
Art. no. 633/35
Art. No. stainless steel plastic
up to 2 mm up to 4 mm
633/35 Ø 35 mm | 1 ⅜“ Ø 32 mm | 1 ¼“
633/45 Ø 45 mm | 1 ¾“ Ø 42 mm | 1 ⅝“
648 Pipe deburrer 647/63 Pipe deburrer plastic pipes
• for internal and external deburring of stainless steel, • for internal and external deburring of hard and
brass, aluminium and plastic pipes thick-walled plastic pipes, Ø 25 – 63 mm
• robust quality tool: stiff aluminium housing and • stiff aluminium housing with special blades
very fine deburrer blade • particularly suitable for swimming pool construction
Art. No. For pipes Ø mm
648/35 8 – 35
648/54 10 – 54
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 277641 Pressure testing pump 7640 Pressure testing pump
stainless steel
For safe tightness testing on pipes, in particular with For safe tightness testing on water pipes
chemically contaminated, aggressive liquids • for safe tightness testing on water pipes
• also suitable for solar panel systems and • brass piston, 1/2“ hose connection
underfloor heating systems • test pressure up to 60 bar
• 1/2“ hose connection • storage tank 12 l, painted red
• test pressure up to 60 bar • tank dimensions 500 x 180 x 140 mm
• storage tank 12 l made of STAINLESS STEEL
• per stroke 0.027 litres
• tank dimensions 500 x 190 x 140 mm
1830 Claw-type gripper magnetic
Everything is under control!
• flexible claw-type gripper, length 60 cm
• ideal for gripping screws, nuts etc. that
are difficult to reach
• the claw, with ‚spring-action-system‘,
can be opened up to 23 mm
• the additional magnet lifts metal parts
up to 400 g
• the integrated LED allows to find dropped
small-parts even in dark corners
28 Prices on request. Errors and technical changes reserved.637 Hydraulic pipe bending set | Basic Metal
Supplied in a strong plastic case:
• 1 hydraulic hand pipe bending tool
• bending segments, die-cast aluminium
5 pieces Art. No. 637 | 10 - 12 - 15 - 18 - 22 mm
9 pieces Art. No. 637-10 | 10 - 12 - 15 - 16 -
18 - 20 - 22 - 26 - 32 mm
4 pieces Art. No. 637-20 | 16 - 20 - 26 - 32 mm
• 3 dollies Art. No. 637
• 5 dollies Art. No. 637-10
• 4 dollies Art. No. 637-20
• fast hydraulic feed and return
• precise bends up to 90°
• bending radius 4 x diameter
Art. No. Description Copper Ø mm Stainless steel Ø mm Combined Ø mm
637 Bending set | Basic Metal 10 – 22 10 – 15 –
637-10 Bending set | Combined 10 – 22 10 – 15 12 – 32
637-20 Bending set | Basic Composite 16 – 20 – 12 – 32
637-10 637-20
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 292845 Assembly connection 705/1/2 Valve extension cutter with
gauge chip collection
Stainless steel construction plugs • for trimmingn ½“ valve extensions made of
• dimensional and spatial alignment of all red brass
common installation inside dimensions • with SDS chuck adaptor
(½“) in bare brickwork • rubber cap collects the milled chips
• easily readable circular bubble and with depth
adjustment
• fixed adjustment increments:
75, 100, 120, 153, 200, 240 mm
• also fits for assembly rails 150 mm
• for bathtubs and shower mixers, corner and
flush-mounted valves, pipe ventilators
3722 Pipe cleaning pump
• suction and pressure cleaner
for blocked pipes
• short attachment for washbasins
and sinks
• long attachment for WC
30 Prices on request. Errors and technical changes reserved.1368 Glass tile drill set
5 piece
• Sizes: 2 x 6, 2 x 8.1 x 10 mm
• optimally designed for cordless power tools
• 1/4“ hexagonal shaft
• pointed chisel edge enables precision drilling,
can be re-sharpened
Please note: Only use in rotation (low rotation speed)
and in sufficiently cool
Areas: ceramics, tiles, hard-fired tiles, glass, acrylic glass,
mirror glass
1368-1 Glass tile drill
Single Drill
• optimally designed for cordless power tools
• 1/4“ hexagonal shaft
• pointed chisel edge enables precision drilling,
can be re-sharpened
Please note: Only use in rotation (low rotation
speed) and in sufficiently cool
Areas: ceramics, tiles, hard-fired tiles, glass,
acrylic glass, mirror glass
Art. No. Ø mm
1368-1/5 5
1368-1/6 6
1368-1/8 8
1368-1/10 10
1368-1/13 13
1368-1/14 14
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 311381-1 DIAMOND core drills „BRIdiamondDrill“
• Drilling
D
rilling without a centring aid
• connector M14 to be used with the angle grinder
• hi-grade diamond grains for fast working, provide
clean results
• perfectly suited for drilling clean holes in granite
and stone slabs, porcelain, ceramics and tiles
• extremely long service life thanks to high speeds
(recommended: 6,000 – 12,000 rpm),
• no extra cooling required BRIdiamondDrill
• wax filled core helps cooling and lubricates,
need not watering Art. No. Ø mm L mm S mm
1381-1/6 6 65 10
1381-1/8 8 65 10
1381-1/10 10 65 10
1381-1/12 12 65 10
1381-1/14 14 65 10
S
L
1381 | 1381-7 DIAMOND core drills set „BRIdiamondDrill“
• Drilling without a centring aid, 7 pieces
• Art. no. 1381: Ø 2 x 6, 2 x 8, 10, 12, 14 mm
• Art. no. 1381-7: Ø 3 x 6, 3 x 8, 10 mm
• connector M14 to be used with the angle grinder
• hi-grade diamond grains for fast working,
provide clean results
• perfectly suited for drilling clean holes in granite
and stone slabs, porcelain, ceramics and tiles
• extremely long service life thanks to high
speeds (recommended: 6,000 – 12,000 rpm)
• no extra cooling required
• wax filled core helps cooling and lubricates, BRIdiamondDrill
need not watering
32 Prices on request. Errors and technical changes reserved.1381-4 DIAMOND core drills set „BRIdiamondDrill“
• Drilling without a centring aid; 4-pieces:
Ø 2 x 6, 8, 10 mm
• connector M14 to be used with the angle grinder
• hi-grade diamond grains for fast working,
provide clean results
• perfectly suited for drilling clean holes in granite
and stone slabs, porcelain, ceramics and tiles
• extremely long service life thanks to high speeds
(recommended: 6,000 – 12,000 rpm)
• no extra cooling required
• wax filled core helps cooling and lubricates,
need not watering
BRIdiamondDrill
1381-6 DIAMOND core drills set „BRIdiamondDrill“
• Drilling
D
rilling without a centring aid;
7 pieces: Ø 2 x 6, 8, 10, 12, 14 mm
1 Centering Guide stainless 5 – 40 mm
• connector M14 to be used with the angle grinder
• hi-grade diamond grains for fast working, provide
clean results
• perfectly suited for drilling clean holes in granite
and stone slabs, porcelain, ceramics and tiles
BRIdiamondDrill
• extremely long service life thanks to high speeds
(recommended: 6,000 – 12,000 rpm)
• wax filled core helps cooling and lubricates,
need not watering
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 331379-3 DIAMOND core drills „BRIdiamondDrill“
Advantages of the DIAMOND drills:
• precise positioning, minimum risk of slipping off
• safety, Fast, Efficiency & Sophisticated design
• special wax filling ensure cooling, no cooling water
required
• Hex shank Ø 8,2 mm
Reliable cutting, drilling & grinding in the following
materials: floor and wall tiles, hard porcelain, granite
and marble, glass and fiberglass BRIdiamondDrill
Art. No. Ø mm L mm S mm
1379-3/5 5 67 10
1379-3/6 6 67 10
1379-3/8 8 80 10
1379-3/10 10 80 10
1379-3/12 12 80 10
S
L
1379-4 DIAMOND core drills set „BRIdiamondDrill“
• Drilling without a centring aid, 4 pieces:
Ø 2 x 6, 8, 10 mm
• hi-grade diamond grains for fast working,
provide clean results
• perfectly suited for drilling clean holes in
granite and stone slabs, porcelain, ceramics
and tiles
• extremely long service life thanks to
high speeds (recommended)
• no extra cooling required
BRIdiamondDrill
34 Prices on request. Errors and technical changes reserved.1379-6 DIAMOND core drills set „BRIdiamondDrill“
• Drilling without a centring aid; 7-pieces:
Ø 2 x 6, 8, 10, 12, 14 mm
1 Centering Guide stainless 5 – 40 mm
• Hex shank Ø 8,2 mm
• hi-grade diamond grains for fast working,
provide clean results
• perfectly suited for drilling clean holes in
granite and stone slabs, porcelain, ceramics
and tiles
• extremely long service life thanks to
high speeds (recommended)
• no extra cooling required
BRIdiamondDrill
1385-6 Centering Guide stainless „BRIdiamondDrill“
Stainless steel Centering guide for
diamond core drills
suitable for Diamond tools with a
diameter of 5 – 40 mm
BRIdiamondDrill
Features:
• with strong suction bell
• infinitely adjustable
• easy fixing
• professional stainless steel model
• extreme handy
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 35w
1380-4 Hole saw arbor „BRIspeedEject“
Using the BRIspeedEjects makes hole drilling
easy and effortless.
By setting your drill to left hand drive the drill
core is ejected automatically.
This Arbor also allows you to change from one
saw to another effortlessly. Also a plus: the
patented reciever for hole saws ranging from
40 – 250 mm in diameter.
• fully automatic ejection of drill core
• changing of saws is made easyer
• patended hole saw reciever
Set Includes:
Includes:
1x hole saw arbor for saws ranging from
40 – 250 mm in diameter
1x Pilot drill (diameter 6,5 mm, length 75 mm)
Ø -
> 40 mm
–
Video | 1380-4
BRIspeedEject
36 Prices on request. Errors and technical changes reserved.1383 Bi-Metal Arbored Hole Saw „BRIspeedEject“
The new 6-piece BRIspeedEject kit perfects
working with hole saws.
Variable 4/6 teeth. Made from high quality
cobalt-alloyed Bi-Metal with one-piece rear
cover.
Designed specifically for: Wood, Metal, Dirwall,
Polymer, non-ferrous Metal, Aluminim, Steel and
Stainless Steel from 1 mm thickness.
Saw arbor BRIspeedEject with hexagonal drill bit.
The set comes in a high quality polymer case,
measurements 340 x 275 x 83 mm BRIspeedEject
Set Includes:
5 x Bi-Metal hole saw with diameters
44, 57, 68, 76, 114 mm
1 x BRIspeedEject hole saw arbor
with Pilot drill
Video | 1380-4
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 371384 HSS-bi-metal hole saw set | Plumbing standard
For sanitary work
• supplied in unbreakable plastic case
• 6 pieces:
5 HSS-bi-metal hole saws
Ø 44, 57, 68, 75, 114 mm, 4 – 6 tpi
1 SDS chuck adaptor with HSS drill
• cutting depth 40 mm
• for steel, non-ferrous metals, HT pipe,
wood and aerated concrete
• also ideal for switches and sockets
• all hole saws are also available individually Art. no. 1380
38 Prices on request. Errors and technical changes reserved.130314 LED „IP67 Torch“
Bar-shaped lamp 40.5 x 141 mm
• IP67, dust-tight, protected against brief
submersion (water-tight)
• 1 x switch operation 100 % lighting
performance 2 x switch operation 30 %
lighting performance
• LED 5 Watt CREE XP-G
• 4 x AAA batteries
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 39130360 Dome light „HUPlight50combi““
This extremely powerful LED work lamp with 4000 lumens allows for
the illumination of large areas with an angle of 360°.
• integrierter Akku Li-Ion 7,4 V/ 6,6 Ah
• 50 watt LED,
LED, Integrated Li-Ion 7.4V / 6.6 Ah battery
• super tough housing made of highly shock-resistant
plastic material
• for use inside and out, splashproof according to IP54
• extremely bright illumination, 6500K colour temperature
• 4000 Lm luminosity
• Colour rendering 90 CRI (Colour Rendering Index)
• variable
variable light output, 50 % | 100 %
• operating
operating time: - Approx. 2 hours with 100% light
output - approx. 4 hours with 50 % light output
• 2.5 hours charging time
• 2 x AC power plugs: 220 – 240 V~AC | max: 3000 W
• can
can be used to charge external devices, cable:
5 meters H07RN-F 3G1.5 mm²
• hook
hook for securing and hanging, carrying handle
• dimensions: Ø 280 x 260 mm
2x
130361 Stand for „HUPlight50combi“
• Dimensions: 115 x 115 x 300 (Hight) cm
• adjustable height maximum height 3 m
40 Prices on request. Errors and technical changes reserved.130344 | 130346 | 130352 Compact floodlight „HUPlightpro“
HAUPA compact floodlights HUPlightPro with their brilliant light and extreme robustness
of the solid housing with edge protection
• integrated Li-Ion
• high-quality
high-quality and solid housing made of diecast
aluminium, with plastic edge protector
• for
for use inside and out, splashproof according to IP54
• 6500 K colour temperature, Colour rendering 90 CRI
• variable
variable light output, 50 % | 100 %
• operating
operating time: - Approx. 3 hours with 100 %
light output - approx. 6 hours with 50 % light output
• 4,75 or 5 hours charging time using power unit supplied
• can
can be used to charge external devices via USB
• charger:
charger: 100 – 240 V AC, 12 V KFZ charging cable,
adjustable stand
360° | 130344
Art. No. Power Li-Ion battery Brightness Dimens. L x B x H mm Power supply
130344 10 Watt 3,7 V | 4,4 Ah 900 Lm 170 x 121 x 43 5 V | 1 A DC
130346 20 Watt 7,4 V | 4,4 Ah 1800 Lm 185 x 135 x 43 12 V | 1 A DC
130352 30 Watt 7,4 V | 5,2 Ah 2500 Lm 185 x 135 x 43 12 V | 1 A DC
Video |130344
HUPlightpro Crashtest
130343 130343 Magnetic lamp holder
• holder for attaching working
lights
• suitable for Art. No. 130344,
• extra strong magnet for
flexible mounting
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 41220263 Tool case „Start-up Sanitär“
Hard-side case with 24 tools
• Dimensions: 500 x 210 x 430 mm
• 2 tool sections, document pocket,
combination lock
• bottom half of case equipped with variable
partitions, with high-grade fittings
Content::
• 2C-VDE side cutters, 160 mm
• 2C-VDE telephone pliers, 200 mm
• water pump pliers, 240 mm
• 2C-VDE electrician‘s screwdrivers
2.5 x 75 mm | 4 x 100 mm |
5.5 x 125 mm | 6.5 x 150 mm
• 2C-VDE cross slotted screwdrivers PH 1 + 2
• Hexagon angle screwdriver set, with
spherical head, 9 pcs., wrench size 1,5 – 10
• express-Key M10
• pipe wrenches, 430 mm, pipe 1 ½“,
wrench size 59 mm
• tube cutter, Ø 3 – 35 mm
• PUK pocket saw DIN 6473 C
• electricians’ chisel, 12 x 250 mm
• engineers’ hammer
• paint scraper, 185 x 40 mm
• plaster cup, Ø 125
• water brush
• wire brush, 300 mm
• folding rules, wood, 2 m
• cabinet level, 200 mm
• carpenters‘ pencil, 150 mm
220263 | 360°
42 Prices on request. Errors and technical changes reserved.220313 Tool holder for construction buckets
Tool bag made of extra strong 1680D
polyester
• Dimensions: 460 x 280 x 40 mm
• for hanging up/covering in a commercially
available 10 – 15 l bucket
• waterproof and dirt resistant
• double cross-seam stitching for high load
capacity
• the different ones pocket sizes are used
to hold drills, screwdrivers, pliers filling
and much more
• 30 exterior pockets/compartments,
14 inner pockets/compartments
• 1 hammer loop and 1 closed cell phone pocket
• Colour: black, green
For standard construction or paint buckets 10 – 15 l
360° | 220313
For commercial Plenty of space inside Easy installation: Fold both sides
construction buckets plus 14 inside pockets simply drop the bag in outwards and DONE
with 30 outer pockets the bucket
Supplied without buckets and tools!
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 437555 Tool case
Ergonomic shape easy-use tool case 600D Polyester
• Dimensions: 450 x 210 x 370 mm
• with integraged zipper-cover with velcro closure
• 35 various storage options for different sizes of
tools and accessories in one large main compartment
for easy access
• strong steel carrying handle with EVA anti-slip
grip and rubber protection stands to prevent
from moisture and dirt
• integrated Heavy duty protection bottom to keep
tools protected against moisture and dirt
• heavy duty stitching with bar tacking and metal
rivets at stress points
• comfortable padded adjustable shoulder belt with
metal hooks and rings
• maximum carrying weight: 20 KG
BRINKO Highlights 2021
... Tool cases and tool bags
7500 Tool backpack
Practical tool backpack made of durable 600D polyester
• Dimensions: 370 x 430 x 220 mm, 1.2 kg
• reflective marking stripes
• silver colored reflective marking stripes
• 1 Large main storage zipper compartment with
integrated Laptop holder
• 1 large front side zipper pockets
• 2 compact side zipper pockets
• adjustable shoulder straps with integrated
reflection stripes
• top side polyster carrying handle with
heavy duty anti-slip grip
• 4 rubber bottom protection dots
Reflective marking
stripes
44 Prices on request. Errors and technical changes reserved.7413 „Skater“ tool trolley
Hardshell case made of PP plastic
• Dimensions: 470 x 360 x 220 mm
• stiff frame made of reinforced aluminium
• 3 strong hinges on the back
• strong lid support
• impact-resistant and shock-proof
• resistant to chemicals, temperature-resistant
• ergonomic, non-slip carrying handle
• telescopic handle and ball
bearing mounted wheels
• 2 key-operated locks,
1 name plate
INSENSITIVE CORROSION SHOCKRESI- BIKES
FIRMLY
-
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 457410 Tool case „plumbing“
Hard-top case, black
Dimensions 480 x 370 x 225 mm
• alu frame, non-slip carrying handle
• 2 locks, with shoulder strap
• reinforced metal corners as additional
• protection against damage
Inside:
• 2 tool kits completely removable
• document pocket
• bottom half of case equipped with
variable partitions
46 Prices on request. Errors and technical changes reserved.7418 Tool case „Plumbing CLASSIC“
Hard-top case, black
fitted with 22 special tools
Dimensions 480 x 370 x 225 mm
• alu frame, non-slip carrying handle
• 2 locks, with shoulder strap
• reinforced metal corners as additional
• protection against damage
Inside:
• 2 tool kits completely removable
• document pocket
• bottom half of case equipped with
variable partitions
Art. No. Content of Set Art. No. Content of Set
- 56 Open-end wrench 10 x 13 mm | 17 x 19 mm 2836/300 Lightweight metal spirit level 300 mm
114 Hex key set 2980 Universal knife
619/1 Corner pipe pliers, 320 mm, 49 mm, 1" 2999-1/25 Solder water brush, 25 mm, 1"
633/35 Pipe cutter with deburrer 3458/10 Work gloves 10
655 Combination washbasin tap wrench 4255 Safety glasses
666/2 Step wrench 2 Bit set | 32 pieces | colour-coded,
1 bit holder with quick release
680/240 Water pump pliers 240 mm
1 adaptor for 1/4“and 30 bits:
1333/200-10 Electrician‘s chisel 10 mm 4x red, cross-head PH size 1, 2, 2, 3
1470/300 Cross peen hammer 300 g 4x green, cross-head PZ size 1, 2, 2, 3
2145
4x blue, slot-head 3, 4, 5, 6 mm
1654-1/250 Engineer‘s file | half round 4x yellow, Allen 3, 4, 5, 6 mm
1709/40x20 Brass brush 7x orange, Tx TX 10, 15, 20, 25, 27, 30, 40
7x purple, Tx with hole STX 10, 15, 20, 25,
1728/146 Universal bow saws 27, 30, 40
2142 Bit holder 350 mm 2705/2 Cutting Folding ruler 2 m
2142-1 Bit holder 100 mm
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 477438 Tool case „Plumbing EXCLUSIVE“
Hard-top case, black
fitted with 35 special tools
Dimensions 480 x 370 x 225 mm
• alu frame, non-slip carrying handle
• 2 locks, with shoulder strap
• reinforced metal corners as additional
• protection against damage
Inside:
• 2 tool kits completely removable
• document pocket
• bottom half of case equipped with
variable partitions
Art. No. Content of Set
Art. No. Content of Set
1333/200-10 Electrician‘s chisel 10 mm
22-1/300 Instrument key 300 mm
1470/500 Cross peen hammer 500 g
56 Open-end wre 10 x 13 mm | 17 x 19 mm
1654-1/250 Engineer‘s file | half round
Socket wrench 10 x 11, 12 x 13, 17 x 19, 19
92 1710 Burner brush
x 22
105/10 Plumbing installation wrench 1726/146 Universal bow saws
106-2 Plumbing four-way socket wrench 2070/125 slot-head screwdriver 5,5 x 125
114 Hex key set 2070/150 slot-head screwdriver 6,5 x 150
129-3/250 Reversible ratchet 2080/1 Screwdriver | PZ1 x 80 / 2 – 3 mm
129-7/125 Extension 2080/2 Screwdriver | PZ2 x 100 / 3 – 5,2 mm
129-12 SUPERLOCK insert 10, 13, 17 mm 2088/145 VDE voltage tester
619/1 Corner pipe pliers, 320 mm, 49 mm, 1" 2524/235 All-purpose pencil 235 mm
631-5 Miniature pipe cutter 2705/2 Cutting Folding ruler 2 m
633/35 Pipe cutter with deburrer 2980 Universal knife
655 Combination washbasin tap wrench 2999-1/25 Solder water brush, 25 mm, 1"
673/86 Step wren | Wasser 86 mm 3820 Hemp dispenser
685-1/240 Wasserpumpenzange 240 mm 2836/400 Lightweight metal spirit level 400 mm
48 Prices on request. Errors and technical changes reserved.7515 Servcie bag
Strong tool bag made of hard-wearing
600D Polyester
Dimensions 450 x 350 x 190 mm
• 2 full length double zips, reinforced seams
• padded carrying handle and shoulder straps
A total of 46 storage options:
• generously proportioned section with special
pockets and elastic holders
• extra section for documents and other
accessories
7516 Servcie bag „Plumbing CLASSIC“
Strong tool bag made of hard-wearing
600D Polyester
fitted with 22 special tools
Dimensions 450 x 350 x 190 mm
Art. No. Content of Set
Art. No. Content of Set
56 Open-end wrench 10 x 13 mm | 17 x 19 mm
114 Hex key set 2836/300 Lightweight metal spirit level 300 mm
619/1 Corner pipe pliers, 320 mm, 49 mm, 1" 2980 Universal knife
633/35 Pipe cutter with deburrer 2999-1/25 Solder water brush, 25 mm, 1"
655 Combination washbasin tap wrench 3458/10 Work gloves 10
666/2 Step wrench 2 4255 Safety glasses
680/240 Water pump pliers 240 mm Bit set | 32 pieces | colour-coded,
1 bit holder with quick release
1333/200-10 Electrician‘s chisel 10 mm 1 adaptor for 1/4“and 30 bits:
1470/300 Cross peen hammer 300 g 4x red, cross-head PH size 1, 2, 2, 3
4x green, cross-head PZ size 1, 2, 2, 3
1654-1/250 Engineer‘s file | half round 2145
4x blue, slot-head 3, 4, 5, 6 mm
1709/40x20 Brass brush 4x yellow, Allen 3, 4, 5, 6 mm
7x orange, Torx TX 10, 15, 20, 25, 27, 30, 40
1728/146 Universal bow saws
7x purple, Torx with hole STX 10, 15, 20, 25,
2142 Bit holder 350 mm 27, 30, 40
2142-1 Bit holder 100 mm 2705/2 Cutting Folding ruler 2 m
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 49625-5XL/ACO203 Cordless pressing Tool ACO203XL BT | 5.0 Ah
Comfort Line ACO203XL - the all-round expert – NEW WITH BLUETOOTH
Supplied in case:
cordless pressing tool, 2x battery 18 V 5.0 Ah Li-lon, 1 charger space
for up to 6 press jaws PB2
• Data transfer via Bluetooth® The all-round talent –
• for press connections 12 – 108 mm metal, 16 – 110 mm plastic even for big dimensions
• automatic pressing process, bolt retention up to 108 mm
• fits securely in your hand: 3.9 kg (incl. battery), 46 cm long
(without press jaw), ergonomic shape
• Features: status display via LED display, rotating knob, return stroke limitation
• output: 450 W, piston force: 32 kN, piston stroke: 80 mm (optionally 40 mm)
• battery: 18V Li-Ion 5.0 Ah, battery capacity: up to 250 pressing processes, charging time: 75 min
• compatible with novopress PB2 press jaws Art. no. 625-30 to -35 and novopress PS2
press collars Art. no. 625-40 to -45 and novopress PS3 press collars Art. no. 625-53
625-5PM/ACO203 Cordless pressing Tool ACO203 BT | 5.0 Ah
Comfort Line ACO203 - a new generation of pressing technology – NEW WITH BLUETOOTH
Supplied in case:
cordless pressing unit, 1 rechargeable battery 18 V 5.0 Ah Li-Ion, 1 charger, storage space for up to 6 press jaws PB2
• Data transfer via Bluetooth®
• for press connections 12 – 54 (108) mm metal, 16 – 110 mm plastic
• fits securely in your hand: 2.8 kg, 39 cm long (without press jaw), ergonomic shape
• Features: pressing area illumination, implemented force monitoring and diagnosis function, innovative brushless
motor technology for faster pressing process and more pressings per battery charge
• output: 450 W, piston force: 32 kN, piston stroke: 40 mm
• rechargeable battery: 18 V Li-Ion 5.0 Ah, battery capacity: up to 160 pressing processes, charging time: 75 min
• compatible with novopress PB2 press jaws Art. no. 625-30 to -35 and novopress PS2 press collars
Art. no. 625-40 to -45
625-1PM/ACO103 Cordless pressing Tool ACO103 BT | 5.0 Ah
Comfort Line ACO102 - compact and powerful efficiency – NEW WITH BLUETOOTH
Supplied in case:
cordless pressing tool, 1 battery 12 V 4.0 Ah Li-lon, 1 charger storage space for up to 6 press jaws PB1
• Data transfer via Bluetooth®
• for press connections 12 – 35 mm metal, 16 – 40 mm plastic
• automatic pressing process, bolt retention
• particularly suitable for tight pressing space and installation situations
• real single-handed operation: 1.7 kg light, 32 cm long (without press jaw), ergonomic shape and
a crimping head that can be rotated by 180°
• LED display with electronic display: pressing force monitoring, battery charge monitoring, error messages
• output: 240 W, piston force: 19 kN, piston stroke: 30 mm
• battery: 12 V Li-Ion 4.0 Ah, battery capacity: 50 – 180 pressings, charging time: approx. 40 min
• compatible with novopress PB1 press jaws Art. no. 625-20 to -25
50 Prices on request. Errors and technical changes reserved.Powered by Brushless Motor Technology
NEW WITH BLUETOOTH TECNOLOGY
Analysis of the pressing tool performance via the NovoCheck
app available in the Apple App Store and Google Play Store
625-5XL/ACO203
Metal systems up to 108 mm
625-5PM/ACO203
Plastic systems up to 110 mm
625-1PM/ACO103
Metal up to 54 mm (M-Contour)
up to 108 mm (V-Contour)
Plastic up to 110 mm
Metal up to 35 mm
Plastic up to 40 mm
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 51625-4PG/ECO203 Pressing Tool ECO203
Comfort Line ECO203 -
a new generation of pressing technology
Supplied in case:
pressing unit, storage space for up to 6 press jaws PB2
• for press connections 12 – 54 (108) mm metal,
16 – 110 mm plastic
• fits securely in your hand: 3.2 kg, 40 cm long
(without press jaw), ergonomic shape
• features: automatic sequence control, return, pressing area
illumination, implemented diagnosis function, 5 m cable
• output: 450 W, piston force: 32 kN, piston stroke: 40 mm
• compatible with novopress PB2 press jaws
Art. no. 625-30 to -35 and novopress PS2 press collars
Art. no. 625-40 to -45
625-2PG/EFP203 Pressing Tool EFP203
Strong performance
in a slimline design
Basic Line
Basic Line EFP203 -
strong performance in a slimline design
Supplied in the case:
preessing tool, storage space for up to 6 press jaws PB2
• for press connections 12 – 54 (108) mm metal, 16 – 110 mm plastic
• automatic return, short pressing actions
• fits securely in your hand: 3 kg, 40 cm long (without press jaw),
ergonomic shape and a 270° rotatable pressing head
• output: 450 W, piston force: 32 kN, piston stroke: 40 mm
• compatible with novopress PB2 press jaws
Art. no. 625-30 to -35 and novopress PS2 press collars
Art. no. 625-40 to -45
52 Prices on request. Errors and technical changes reserved.2836-1 Magnetic spirit level
• smooth rectangular profile, painted silver Art. No. Lenght mm
• perspex bubble tubes, leak-proof and unbreakable
• with coated measurement surface, 2836-1/400 400
scale in mm and cm 2836-1/600 600
• suitable for making overhead measurements
• with extra strong magnets for a secure hold 2836-1/800 800
on pipes, metal in inside walls, installations 2836-1/1000 1000
and other steel components
• with shock-absorbing and removable end caps
• with nonslip pimples
• measurement accuracy:
0.0285° = 0.5 mm per 1 m in normal position
2839 Spirit level
• spirit
spirit level made of ABS,
painted blue
• integrated
integrated magnetic strip at the bottom
• with
with hanging hole
• perspex
perspex bubble tubes, leak-proof and unbreakable
• easy
easy and easy to use
• sticks
sticks on most metal surfaces
Germany: BRINKO GmbH, Freiheitstraße 15–23, D-42853 Remscheid
Phone: +49 2191 4943-0, Fax: +49 2191 4943-34, E-mail: info@brinko.de 531180 Siphon
Guaranteed the right siphon
for your application with the
highest degree of security
• plastic body, 2 x suction disc Ø 120 mm
• load-bearing capacity: up to max. 80 kg
• guideline value – use under the specified values recommended
• handle is covered with non-slip rubber
Can be used on all materials with smooth, sealed surfaces: panes
of glass, tiles, stone, sheet steel, panels made of coated wood, etc.
1140/8 Tension cable | 8 mm, length 1 m
Rubber tension cable 8 mm thick
and 100 cm long
• approved lashing capacity: 70 N ~ 7.1 kg
393152 Lashing belt, two-piece with hook
Permitted tensile force 400 or 1000 daN in
a straight line, two-piece with hook
• 800 daN when wrapped
• colour green
• belt width 25 mm
• belt length 8 m
• with mini ratchet
54 Prices on request. Errors and technical changes reserved.You can also read
