The Ultimate Evolution Aluminium bi-folding door - www.sliders-uk.com
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Technical Guide
www.sliders-uk.com
The Ultimate Evolution
Aluminium bi-folding door
Part of the exclusive range available from Sliders UK
Cutting-edge innovation,
Ultra slim sightlines and installation
in as little as 45 minutes
End-user appeal and high margin
‘engineered-in’
The Ultimate Evolution redefines bi-folding
door design with a ‘hardware-first approach’.
It’s built around the latest innovation in
hardware design, which ensures not only
effortless operation and reliability – but also
makes installation far simpler.
With ultra slim sightlines, a wide choice of colours,
multiple threshold and double and triple glazed
options,the Ultimate Evolution is an aluminium
bi-folding door that delivers on end-user appeal
– but also through-life performance.
www.sliders-uk.com
1
Exacting detail and PAS24 and
flexibility in design BS6375 Weather Tested Part Q approved
PAS24 tested and Part Q* compliant,
the Ultimate Evolution features dedicated
shoot-bolt intermediate locks operated by
low projection handles and top shoot bolt
for doors over 2500mm tall. Traffic doors
incorporate a three-point dead latch and
hook lock with dedicated strike plates.
Structural strength Advanced performance
The Ultimate Evolution taps into A 30mm polyamide thermal break
www.sliders-uk.com
the inherent strength of aluminium delivers impressive U-values, while
to deliver slim sightlines but the Ultimate Evolution is also fully
also incredible design flexibility, BS6375 Weather Tested.
accommodating larger individual
panels, and multiple configurations
to span openings of up to 8400mm*.
*Subject to specific site conditions and wind loads. *Specified options only. 3
7-1-6 7-2-5
Installation in 45-minutes 45 * Indicates Document Q
Compliance not available
Finish options
with this scheme (and it’s
reverse, eg. 202 and 220).
Adjustable Jambs
ambs Easy Installation
Simplified door squaring Standard profile colours
and setting The Ultimate Evolution is available in white, anthracite grey
Its’ highly innovative fully adjustable and anthracite grey-on-white, as standard.
Formeans
jamb easethatof installation our new bi-fold system comes with
the Ultimate Evolution We can also offer any RAL colour or combination of colours,
adjustable
is a jambs
highly ‘forgiving’ totoboth
bi-fold fit. sides on special order.
The easy-adjustment system delivers Polyester powder coated to BS/EN12206-1:2004, minimum
up to 8mm of tolerance, making if far finish thicknesses are 40 microns.
These
simpler allow
to align theinstallers
door - evento correct issues that can sometimes
where
apertures are out of square. The finish is also guaranteed for 10-years.
take hours or days of repeat visits to sort out.
This dramatically simplifies door Colour-matched hardware
squaring and setting which means the
The Ultimate Evolution is also available in colour matched
6.00 NB: Toe
Ultimate and heeling
Evolution of sashes
can be installed in is still required. hardware plus chrome and satin finishes.
Outerframe detail with adjustable jambs as little as 45-minutes.
±4.00
127.70mm [5"]
Outerframe detail with adjustable jambs
Slim sightlines and inline system
with sash and outer frame the Standard colour options
same depth
ed Unit 232, Oldfield Road, Walton Summit, Bamber Bridge, Lancashire PR5 8BG
F : 01772 698333 E : sales@sliders-uk.com W: www.sliders-uk.com
Adjustable jamb – simplified
External
squaring and setting
ter: twitter.com/sliders_uk
Anthracite Grey White Anthracite Grey
on White
Internal
Internally glazed accommodating Door handle options
28mm and 35mm (triple glazed) IGUs
www.sliders-uk.com
Ultra-smooth bottom running
Black White Anthracite Grey Chrome Satin
5
Technical information
Configurations
Cross sections
Swing door jamb detail with adjustable section (DBE102) - Open out
With inward and outward opening options, the Ultimate Evolution Intermediate lock with hinges and shoot-bolt Swing door jamb detail with adjustable section
offers exceptional design flexibility with 16 different configurations
up to a maximum seven individual panels.
Locking interm. with hinges and shoot bolt (DBE`102) - Open out
73
73
6A
2-0-2* 3-3-0 3-2-1 4-1-3 4-4-0* 4-2-2* 28 DGU 28 DGU
INSIDE OUTSIDE INSIDE OUTSIDE
4A
5-5-0 5-4-1 5-3-2 6-1-5
61.5
61.5
DBE-304
133 Overall Width
130.7 Overall Width
6-3-3 6-6-0* 6-2-4* 7-7-0
13
10
6
69.2
69.2
56.2
55
61.5
7-1-6 7-2-5
8.1 73 Seal with
Low Modulus
Silicone
Sealant After
Final
Adjustment
*Note: Use DBA1-140 Brush instead of DBA1-138
on outer frame, to prevent binding if sliding post
INSIDE OUTSIDE
28 DGU DBE-202 is used.
73 Issued: DES 2016 DO NOT SCALE 50
Issued: DES 2016 DO NOT SCALE 46
www.sliders-uk.com
*Indicates Document Q Compliance not available with this scheme (and it’s reverse, eg. 202 and 220). 7
Technical information
The Ultimate Evolution
Threshold options DBPR-001
St/St Running
12
Track
5
13
Denotes Secondary Visible Surface
32.3
Denotes Primary Visible Surface
Low Threshold Sill
150 mm Drainage
Standard threshold Maximum sash height and width 3000mm x 1200mm
DBE-004
DBE-011
(maximum individual panel weight 120kg)
Sub Sill
81.1 Multiple configurations including open in or out
Ultra-smooth bottom running
16.16 Adjustable jamb – simplified squaring and setting
Slim sightlines and inline system with sash and outer
75.2
frame the same depth
20 White, anthracite grey and anthracite grey-on-white,
DBE-001 as standard colours. Any RAL colour or combination
55 Standard Sill
Outer Frame on special orders
Colour matched handles and magnetic door holders
35
DO NOT SCALE
Low threshold options
30mm polyamide thermal break for increased
150
45.15
thermal values
Internally glazed accommodating 28mm and 35mm
36.5 36.5 (triple glazed) IGUs
35.5
73 U-values ranging from 1.4Wm2/K to 1.7Wm2/K
82.1
Part Q Compliant, Including PAS 24 and BS6375
81.1 Part 1 Weather Testing
36.95
16.16
Low threshold*
39.3
DBE-002
Head/Jamb
55
36.95 45.15
Thermal Infil Outer Frame
ur and Cut)
Issued: DES 2016
Thermal Infil
(Pour and Cut)
35
DBE-004
20
25
Low Threshold Sill
36.5 36.5
82.1
www.sliders-uk.com
73
Denotes Primary Visible Surface
Denotes Secondary Visible Surface
ed: DES 2016 DO NOT SCALE 12
DBE-011
*Low threshold anodised silver only.
150 mm Drainage
Sub Sill 9
150
High precision manufacture
We employ the strictest quality management system,
going far beyond our BSI approved controls.
Contact a member of the sales team on 01772 698222 This includes the manufacture of doors on rigs, which means
or email sales@sliders-uk.com to find out more. that all running and door operation is fully tested before doors
leave the factory floor.
www.sliders-uk.com
Fully wrapped and delivered by our dedicated fleet, it means
that we’re able to offer you guaranteed quality and service.
Images shown are for illustration purposes only.
You can also read
