SCRAP & DEMOLITION INTEGRATED SYSTEMS & SOLUTIONS - High-performance Work Tool Solutions for
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
SCRAP &
DEMOLITION
INTEGRATED
SYSTEMS &
SOLUTIONS
High-performance Work Tool Solutions for:
Excavators, Material Handlers
Wheel Loaders, Backhoe Loaders &
Skid Steer Loaders in the
Scrap & Demolition Industry
D E M O L I T I O N • P R O C E S S I N G • MATER IAL
MULTI-PROCESSORS
SALVAGE, One tool equips your excavator to handle any
task in the demolition process.
• Shear jaws are ideal for
structural demolition
and cutting angle and
DISMANTLE, channel iron, beams,
pipe and rebar.
Shear
DEMOLISH.
With the broadest range of work tools available for
machines in the demolition industry, Caterpillar makes it
possible to efficiently reduce tons of concrete and steel
to a clean job site.
Take advantage of Cat integrated machine and work tool SCRAP & DEMOLITION
SHEARS
solutions to bring your demolition project in on-time and
• Fast cycle
under budget. times for
more cuts
per hour.
• Quickly and
precisely place
jaws with the
360° rotation
system.
• Sized to match
Cat excavators
and skid steer
loaders.
HAMMERS
• 16 Models:
From skid steer
loaders to large
excavators.
• Silenced
hammers: standard
on most models,
available for all.
• Optimum compatibility
for maximum performance
with Cat carriers.
Cat provides Work Tool attachments
for all phases of the demolition process:
DEMOLITION
PROCESSING
MATERIAL HANDLING
Contact your Cat dealer for rental or purchase of these tools.
PROCESSING
HANDLING
• Concrete Cutters cut • Crusher jaws demol- • Specialized jaws like the • Primary pulverizer jaws • Secondary Pulverizers
reinforced concrete with ish concrete structures Tank Shear make short demolish concrete struc- easily separate concrete
densely packed rebar. and give the option of work of bringing down tures, pulverize concrete from rebar and cut the
Steel can be cut in the cutting rebar. steel structures. and separate out rebar. rebar as needed.
shear section of the jaw.
Concrete Cutter Crusher Tank Shear Primary Pulverizer Secondary Pulverizer
GRAPPLES
Contractors‘ Trash Orange Peel
• Robust box • Broad jaws in 4-over- • Built to perform in scrap
frame, 5 tine configuration yards, recycling
wrapped in grab the maxi- centers and
thick abrasion mum payload transfer stations.
resistant steel. per pass. • Tines open wide
• Demolish brick and • Sturdy box- for the maxi-
concrete, load debris. frame con- mum payload
• Sized to leverage struction and per pass.
the maximum high-strength steel for day-in-day-out • Built to handle scrap
performance reliability. steel, construction debris
from your Cat® • The superior choice for transfer stations, and other hard-to-handle
excavator. truck loading or other high-volume, materials.
low-density loading applications.
THUMBS BUCKETS FORKS
• Built to perform Full Rotation • Wheel Loader
• Excavator
in site preparation, • Wheel Loader • Skid Steer Loader
land-clearing, site • Skid Steer Caterpillar offers a full range of
cleanup, forestry and
residential demoli- Loader forks, many of which are used in
the demolition industry.
tion applications. Caterpillar offers
• Full rotation holds a full range of
loads secure, no mat- buckets for excava-
ter what the bucket
tors, wheel loaders
position.
and skid steer load-
• Stiff Link Thumb
ers, many of which
provides economical
yet productive solu- are used in the
tion where hydrau- demolition
lics are not available industry.
Stiff Link
or desired.
M AT E R I A L H A N D L I N G • PROCESSING •
GRAPPLES
SORT, Contractors‘
• Robust box
frame,
SALVAGE, wrapped in
thick abrasion
resistant steel.
• Demolish brick
RECYCLE. and concrete, load
debris.
• Sized to leverage
the maximum
performance
from your
Turning debris into profit takes hard-working tools Cat® excavator.
powered by hard-working machines.
Trash
Caterpillar provides the tools you need to keep your • Broad jaws in 4-over-5
scrap-handling and recycling operations moving and tine configuration
grab the maximum
profitable — day in and day out. payload per pass.
• Sturdy box-frame
construction and
high-strength steel
for day-in-day-out
reliability.
• The superior choice for transfer stations, truck
loading or other high-volume, low-density
loading applications.
Orange Peel
• Built to perform in
scrap
yards, recycling
centers and trans-
fer stations.
• Tines open wide
for the maximum
payload per pass.
• Built to handle scrap
steel, construction debris and
other hard-to-handle materials.
Cat provides Work Tool attachments
for all phases of the scrap process:
MATERIAL HANDLING
PROCESSING
YARD MAINTENANCE
Contact your Cat dealer for rental or purchase of these tools.
YARD MAINTENANCE MACHINE INTEGRATION COUPLERS • HYDRAULICS
SCRAP & DEMOLITION Don’t let the machine interface be the weak link. Only Caterpillar
SHEARS offers couplers and hydraulic solutions designed from the
• Fast cycle ground up to be compatible with Cat® machines. A total
times for
more cuts solution from end to end.
per hour.
• Quickly and Quick Couplers, whether on Wheel Loaders, Track Loaders or
precisely place
jaws with the Excavators, maximize machine productivity. Tools are changed
360° rotation
system. in minutes or seconds — without leaving the cab. Do more and
• Sized to make more with a quick coupler.
match Cat
excavators and
skid steer loaders.
EXCAVATOR COUPLERS
BUCKETS Center-LockTM Pin Grabber Coupler
• Center-Lock gives operators confidence through its
• Wheel Loader
locking system and visible locking mechanism.
• Skid Steer Loader • The red lock on the front pin of the work tool is
Caterpillar offers clearly visible to the operator, always showing the
a full range status of the coupler: open or closed. This gives the
of buckets for operator confidence a tool is engaged, and makes
wheel loaders changing tools faster.
and skid steer • Once Center-Lock has engaged a work tool, the lock is
loaders, many of so secure it will stay locked — even in the event of hydraulic failure.
which are used in the
recycling industry. Dedicated Coupler
• Engages tools equipped with hooks. Weld-on or bolt on hooks are available for
multi-processors, compactors, hammers and most buckets.
• Tip radius of dedicated coupler buckets is identical to pin on, for maximum
performance.
• Manual or hydraulic.
FORKS WHEEL LOADER COUPLERS
• Wheel Loader FusionTM Coupler System
• Skid Steer Loader • Fusion performance is virtually identical to pin-on, with
all the flexibility of a quick coupler system.
Caterpillar offers a • The Fusion coupler sits back, close in the loader arms
full range of forks, — minimizing offset, enabling increased machine
many of which are performance.
used in the recycling • A patented advanced wedging mechanism creates a
industry. tight, rattle-free fit, resulting in a long service life.
• An open coupler frame design clears sight lines from
the operator's seat for loading and unloading confidently
and quickly.
• The Fusion Coupler System gives Caterpillar customers one common interface across
the entire range of small and medium wheel loaders.
BROOMS • This expanded machine compatibility allows one machine to use a range of Fusion
work tools. And, one work tool can be picked up by machines of many different sizes.
• Keep yards clean, for • Work tool attachments included in the Fusion Coupler system include: buckets, brooms,
compliance and re- forks, material handling arms, plows and rakes.
duced machine
undercarriage
wear.
• Stout poly
bristles and HYDRAULIC SOLUTIONS
heavy-duty • Caterpillar provides hydraulic solutions for current and non-current machines.
suspension put • Guaranteed compatibility and performance with Cat tools and machines.
power to the ground, stripping • Backed up by complete after-sale support, all from one industry-leading supplier:
dirt and debris away. Caterpillar.
• Optional water system for dust
control.
M AT C H I N G I N F O R M AT I O N
Contact your local Cat® Dealer for more detailed matching information. Whether you need to rent or buy, your Cat dealer can
work with you to meet the needs of your business.
Center-LockTM Pin Grabber Coupler
Scrap & Demolition Shears
Scrap & Demolition Shears
Orange Peel Grapples*
Contractors’ Grapples
Hydraulic Thumbs
Multi-Processors
Stiff Link Thumbs
FusionTM Coupler
Trash Grapples
Hammers
Hammers
Buckets
Buckets
Buckets
Brooms
Forks
Forks
301.5 904 216
301.6 906 226
301.8 907 232
302.5 908 236
303 914 242
303.5 924 246
304/304.5/305 928 247
307 930 248
308 938 252
311 950 257
312 962 262
314 966 267
315 972 268
318/319 980 277
320 IT38 287
321 IT62
322
324
325
Tools are available for
328 both standard and
329 Ultra-High Demolition
(UHD) machines.
330/336
345
365
385
M312
M313
M314
M315
M316
M318
M320
M322
M325
*For machines with material handler front.
F O R F U R T H E R I N F O R M AT I O N :
Contact your local Cat Dealer and ask for these publications with more detailed information on these and other products.
Multi-Processors Contractors‘ Shears Orange Peel
• GEHQ0166 Grapples • GEHH0010 Grapples
• GEHQ0178 • GEHH0011
Thumbs Brooms Hammers
• GEDQ0213 • GEHQ0182 • YEKN0350
• GEHQ0183 • YEKN0353
• GEHQ0184 • YEKN0354
Wheel Loader
Couplers
• GEDQ0224 Excavator
• GEHQ0185 Couplers
• GEDQ0225
• GEHQ0187
GEHD0001-01 (12-09) For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com ©2009 Caterpillar All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
You can also read
