About the Symposium - TÜV Süd
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
About the Symposium
After three successful conferences in the past, the fourth
International Symposium Emergency Power Systems at
Nuclear Power Plants will be held on May 16 – 17, 2019 in
Munich, Germany.
Emergency Power An international conference for users of emergency power
systems with its presentations, discussions and its exchange
Systems at Nuclear of experience emphasizes the importance of reliable power
supplies in case of loss of other power sources in nuclear
Power Plants power plants.
International Symposium
May 16 – 17, 2019 The objective of the Symposium is to
Munich, Germany support the continuous improvement process for
emergency power systems
increase familiarity with international regulation and
standards
pinpoint and discuss new challenges
The Symposium is intended for specialists at
Nuclear power plants and operating companies
Power plant design companies
Nuclear supervisory and licensing authorities
Engine manufacturers
Expert organizations
Technical and academic institutions
The Symposium is also aimed at professionals from industry,
government agencies and other institutions with similar
responsibilities.
TÜV SÜD Industrie Service GmbH
TÜV SÜD Akademie GmbH
Agenda on May 16, 2019 Qualification
Chair: Manfred Schwemmlein, Framatome GmbH (DE)
10:00 Welcome
14:00 Reliability analyses for the safety demonstration
TÜV SÜD Industrie Service GmbH, Munich (DE)
of EDG systems
10:15 How to be a nuclear EDG – differences over the lifetime Dr. Mariana Jockenhövel-Barttfeld, Yousef Abusharkh,
compared to conventional diesel and gas engine Heiko Kollasko, Manfred Schwemmlein,
generator sets Framatome GmbH (DE)
Dominik Voggenreiter, TÜV SÜD Industrie Service GmbH
(DE) 14:30 Use of the commercial grade dedication (CGD) process
for installed commercial grade equipment for safety
Standards related application
Chair: Dominik Voggenreiter, TÜV SÜD Industrie Service Jasmina Vucetic, Jeff Stevenson, Canadian Nuclear
GmbH (DE) Safety Commission (CA)
10:45 IEEE 387-2017 and IEEE P2420: diesel generator and 15:00 Wӓrtsilӓ seismic test: the innovative seismic qualification
combustion turbines applied as standby power supplies test for large EDG sets
for nuclear power generating stations Sanna-Sofia Heir, Wärtsilä Finland Oy (FI),
Kenneth Fleischer, Fleischer Consultants, LLC. (US) Francesco Degano, Wärtsilä Italia S.p.A. (IT)
11:30 Coffee break 15:30 Coffee break
New Builds & Modernization 16:00 Seismic qualification and beyond-design seismic
Chair: Marius Vartolomei, Westinghouse Electrique evaluation of EDG
France (FR) Karla-Davina Liebig, Markus Buck, Dr. Manuel Pellissetti,
Framatome GmbH (DE)
12:00 Electrical engineering process of tomorrow – effects of
cost factors: lifecycle, systematic and technical Operational Malfunctions
Lukas Molitoris, ROSATOM (RU) Chair: Seiji Nishikawa, Mitsubishi Heavy Industries, Ltd.
(JP)
12:30 Introduction of EDG – pre-study work for potential
SMR design
16:30 Protecting large nuclear power plant against switching
Carsten Wiegand, MTU Friedrichshafen GmbH (DE),
transient overvoltages
David Orr, Rolls-Royce plc (UK)
Thi-Thu-Ha Pham, Schneider Electric (FR)
13:00 Lunch17:00 Opportunities and benefits by digitalization of new and 10:00 Coffee break
existing diesel generators
Manfred Schwemmlein, Framatome GmbH (DE) 10:30 New ways to reliable emergency power supply:
advantages of using multiple high-speed versus single
17:30 End of first Symposium day medium-speed genset installations
Nicolas Delattre, CATERPILLAR Sarl (CH);
19:00 Evening event Minto Halimuddin, CATERPILLAR Inc. (US)
Experience & Lessons Learned (Part I)
Agenda on May 17, 2019 Chair: Gert Hoffmeister, Caterpillar Motoren GmbH &
Co. KG (DE)
New Concepts
Chair: Carsten Wiegand, MTU Friedrichshafen GmbH (DE) 11:00 Emergency diesel generator system maintenance
issues and US performance data
09:00 Enhancement of power supply facilities at Hamaoka Jim Sharkey, EPRI Electric Power Research Institute (US)
Nuclear Power Station of Chubu Electric Power Co.
Yohei Suzuki, Chubu Electric Power Co., Inc. Japan (JP) 11:30 Operational experiences of the diesel generators
in the Paks NPP
09:30 Developments of emergency gas turbine generator units Csaba Fenyvesi, MVM Paks Nuclear Power Plant (HU)
applied to onsite AC power source for Nuclear Power
Plants in Japan 12:00 Bavarian breakfast
Kenta Saito, Keiji Nakamaru, Seiji Nishikawa, Daisaku
Okuno, Mitsubishi Heavy Industries, Ltd. (JP) Experience & Lessons Learned (Part II)
Chair: Lukas Molitoris, ROSATOM (RU)
13:00 Emergency power system challenges and lessons
learned during installation and commissioning activities
Alessio Campedrer, Fabrizio Bianco, Niccolò Tonelli,
Ansaldo Nucleare S.p.A. (IT)
13:30 Emergency power supply solution in Mochovce 3/4 NPP
Ivan Antonio Giannelli, Slovenské elektrárne,
a.s. (SK)/ ENEL Produzione S.p.A. (IT)
14:00 Farewell & End of the SymposiumProgram Committee
Caterpillar Motoren GmbH & Co. KG (DE)
Gert Hoffmeister
Framatome GmbH (DE)
Manfred Schwemmlein
Mitsubishi Heavy Industries, Ltd. (JP)
Seiji Nishikawa
MTU Friedrichshafen GmbH (DE)
Carsten Wiegand Registration & Information
ROSATOM (RU) www.tuev-sued.de/eps-symposium
Lukas Molitoris congress@tuev-sued.de
For further information please contact:
TÜV SÜD Industrie Service GmbH (DE)
Ute Alius +49 89 5791-1647
Dominik Voggenreiter (Chairman)
Westinghouse Electric France (FR)
Marius Vartolomei Conference Registration Fee
€ 820.00 plus applicable VAT
The conference registration fee includes conference docu-
Exhibition
201701-Notstrom-fl8-105x210-w-19-01-31 | Photografic material: MTU Friedrichshafen GmbH, Caterpillar Inc.
mentation, lunch, snacks and beverages during breaks as well
as the evening event.
Interested companies have the opportunity to present their
products and services at the exhibition held in parallel with the
Symposium. Conference Venue
TÜV SÜD · Auditorium Chiemsee
For more details about costs and availability, please contact
Westendstraße 199, 80686 Munich, Germany
Viktoria Wieland at congress@tuev-sued.de.
You will receive travel and hotel information along with the
confirmation of your registration.
Conference Language
The conference language will be English.
TÜV SÜD Akademie GmbH International Conferences
Westendstraße 160 80339 Munich, GermanyYou can also read
