2018 Quick Reference Guide - Budds Subaru
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
2018 Quick Reference Guide
For detailed operating and safety information, please refer to
your Owner’s Manual.
BASIC OPERATION
Lock/Unlock doors
Remote keyless entry system
1 All doors and the rear gate will be locked.
1
2 The driver’s door will be unlocked.
2
1 (To unlock all doors and the rear gate, briefly
3 press the button a second time within 5
2 3 4 seconds.)
PANIC
4 3 Press the button to open the rear gate.
4 The horn will sound and the hazard warning
Remote Access key flashes will flash.
transmitter key (if equipped)
(if equipped)
Keyless access function (if equipped)
All doors and the rear gate will be locked/unlocked by the following procedures carrying the
access key on your person. (The driver should always carry the access key.)
Side door (front door handles only):
Unlock*
Grip
Lock
Touch
*Grip the driver’s door handle to unlock the
Door lock sensor
driver’s door. Grip the front passenger’s door
handle to unlock all doors and the rear gate.
Rear gate:
Unlock
Press
Lock
Press
2
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.Adjust each component
Front seat
Power seat (Driver’s seat - if equipped)
3 1 Forward and backward adjustment
2 2 Seat height adjustment
3 Seatback reclining adjustment
1
Manual seat (if equipped)
1 Forward and backward adjustment
3 2 Seat height adjustment (Driver’s seat only)
3 Seatback reclining adjustment
1
2
2
Tilt/telescopic steering wheel
1 Adjust the seat position and pull the tilt/
telescopic lock lever down.
2
2 Move the steering wheel to the desired level.
3 3 Pull the lever up to lock the steering wheel in
place.
1 Make sure that the steering wheel is securely
2 locked by moving it up and down, and forward and
backward.
Remote control mirror switch
Ignition switch must be in ACC or ON position.
1
1 Select side to adjust.
2 To adjust the mirror, move the switch in the
direction of your desired position.
2
3Start/Stop engine
Push-button ignition switch (if equipped)
To start engine:
Operation STEP1: Carry the access key, and sit in the driver’s
indicator seat.
STEP2: Apply the parking brake.
STEP3: Shift the select lever into the P position.
STEP4: Depress the brake pedal until the indicator on
the push-button ignition switch turns green.
STEP5: While depressing the brake pedal, press the
push-button ignition switch.
To stop engine:
STEP1: Stop the vehicle completely.
STEP2: Move the select lever to the P position.
STEP3: Press the push-button ignition switch.
Change of the power supply (Without starting engine)
Every time the button is pressed without depressing the brake pedal, the power is switched
in the sequence of OFF➞ACC➞ON➞OFF.
OFF (Turned off) ACC (Orange) ON (Orange)
Ignition switch (if equipped)
The key can be turned from ACC to LOCK only when
the key is pushed in while turning it (all models) and the
select lever is in the P position (CVT models).
4
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.Operate Select lever/Shift lever
Continuously variable transmission (if equipped)
Select lever
button
With the brake pedal depressed,
shift while pressing the Select
lever button in.
Shift while pressing the Select
lever button in.
Shift without pressing the Select
Models with Models with lever button.
L position manual mode
L = L position:
L is for using engine braking when going down a hill, etc. To select this mode, move the
select lever from the D position to the L position.
M = Manual mode:
With the vehicle either moving or stationary, move the select lever from the D position to the
M position to select the manual mode.
Shift paddle:
Gearshifts can be performed using the shift paddle
behind the steering wheel.
Downshift Upshift
Manual transmission (if equipped)
To change gears, fully depress the clutch pedal,
move the shift lever, and gradually let up on the
1 3 5
clutch pedal.
2 4 R
5MAIN PARTS AND OPERATION
A B
D C
G H
E
F
I
A Headlight switch/Turn signal lever/Front fog light switch (if equipped)
3 1 Headlights
2 Headlight flasher, High/Low beam change
High beam assist function (if equipped)
1
2 The high beam assist function automatically
* changes the headlight from high beam to low beam
(or vice versa).
3
The high beam assist function is activated
when:
* For models equipped with AUTO position.
1. The light control switch is in the AUTO position
and the low beam headlights are on automatically.
2. The turn signal lever is pushed forward.
When the high beam assist function is activated,
the indicator (green) on the combination meter will
illuminate.
High beam assist indicator
3 Turn signal
6
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.4 Front fog lights (if equipped)
To turn on the front fog lights, rotate dial to .
4 Front fog lights operate only when headlight switch
*
is in...
- position.
- AUTO position and the headlights are on.
* For models equipped with AUTO position.
B Wiper and washer switch
1 1 Windshield wiper
To operate the wiper, rotate knob to;
2 : Mist (for a single wipe)
: Off
: Intermittent
: Low speed
: High speed
3
2 Wiper intermittent time control
3 Windshield washer
4
4 Rear window wiper and washer
To operate the wiper, rotate knob to;
: Continuous
: Intermittent
: Off
: Washer
Rotate knob to . The washer fluid sprays and the
wiper operates.
C Hazard warning flasher switch
To turn on the hazard warning flasher, push the
button.
Use the hazard warning flasher when you have to
park under emergency conditions.
7D Illumination brightness control dial
Turn the dial to adjust the illumination brightness of the
instrument panel.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
When the control dial is turned fully upward, the
illumination brightness becomes the maximum and the
automatic dimming function does not work at all.
E Defroster button/Rear window defogger button
1 Defroster button:
Turn the airflow mode selection dial.
2 , Rear window defogger button:
1 Press the button to turn on rear window defogger,
2 outside mirror defogger and windshield wiper deicer
(if equipped). The function will automatically shut off
after approximately 15 minutes.
*The illustration of the print is Type A.
F Hood lock release knob
G Power window switches
1 For front left window
1 2 For front right window
3
3 For rear left window
5 4 For rear right window
5 Lock switch
2
4
8
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.H Power door locking switch
1 To lock all doors and the rear gate
2 To unlock all doors and the rear gate
1 2
I Fuel filler lid release lever
Pull
Right side
This indicates that the fuel filler door (lid) is
located on the right side of the vehicle.
Child safety locks
Located on the edge of each rear door.
When the lever is in the LOCK position, the rear door
cannot be opened from the inside.
Front seat shoulder belt anchor height
To lower To raise
Pull the release knob Pull the release knob
and slide the anchor and slide the anchor
down. up.
9FUNCTION FOR MORE COMFORTABLE DRIVE
E B C D
F
A
G D H
A Vehicle Dynamics Control OFF switch
Indicator lights on the combination meter
Vehicle Dynamics Control mode
Vehicle Dynamics Control OFF mode
Press the switch to deactivate the Vehicle Dynamics Control system. It may be helpful to
temporarily deactivate the Vehicle Dynamics Control system to escape from the following
situations.
- a standing start on a steeply sloping road with a snowy, gravel-covered, or otherwise
slippery surface
- extrication of the vehicle when its wheels are stuck in mud or deep snow
Do not deactivate the system except when absolutely necessary.
10
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.B Cruise control buttons (if equipped)
Models without EyeSight system
Cruise control enables you to maintain a constant vehicle speed without holding your foot on
the accelerator pedal and it is operative when the vehicle speed is 30 km/h (20 mph) or more.
1 Cruise control main button: To activate and
deactivate
1
2 RES/SET switch
2 ▲ RES/+ side : To increase the speed
3 ▼ SET/- side : To set speed/To decrease the
speed
3 CANCEL button: To temporarily cancel
Models with EyeSight system
EyeSight is a driving support system that uses a range of functions to assist the driver in
making decisions to provide a more safe and comfortable driving as well as to reduce driver
fatigue.
1 (Lane Keep Assist) switch
2 2 (Following distance setting) switch
5
3 RES/+ switch
3 4
4 SET/- switch
2 1
5 (CRUISE) switch
11C Multi-function display (black and white)
1 2 3
1 Outside temperature indicator
2 Driving information display
3 Clock
INFO button: To change the information display,
press the INFO button.
D Multi-function display (color LCD) (if equipped)
1 2 3 1 Clock
2 Climate control
3 Outside temperature
4 Information screen
4 Control switch: By operating ▲ or ▼ of the control
switch, the screens and selection
INFO items can be switched. When the
button /SET switch is pulled toward you,
the item can be selected and set.
Control
INFO button: To change the information display
switch ( 4 ), press the INFO button.
12
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.E Combination meter display (color LCD) (if equipped)
Deactivating 1 Eco gauge
the Eyesight 2 Warning screen/Basic screen
system or
models without Activating 3 EyeSight screen
the EyeSight the EyeSight 4 Cruise control information display
system system
5 Telltale screen
1
2 6 Select lever/gear position indicator
3
7 Odometer/double trip meter
4 8 Fuel gauge
5
6 Control switch: By operating ▲ or ▼ of the control
7 switch, the screens and selection
8 items can be switched. When the /
SET switch is pulled toward you, the
item can be selected and set.
Control
switch
F SRH OFF switch (if equipped)
If the SRH OFF switch is pressed, the SRH OFF
indicator is displayed on the multi information display
of the combination meter, and the steering responsive
headlight system is deactivated.
Steering Responsive Headlight (SRH) system
SRH is a function that automatically moves the headlight beam to the left or right in
accordance with the steering angle. This function helps to improve the visibility at night
by illuminating the road ahead at corners and intersections.
13G BSD/RCTA OFF switch (if equipped)
If the BSD/RCTA OFF switch is pressed, the BSD/
RCTA warning indicator and BSD/RCTA OFF indicator
are displayed on the multi information display of the
combination meter, and the BSD/RCTA is deactivated.
BSD/RCTA
The BSD/RCTA consists of rear radar with Blind Spot
Detection, Lane Change Assist and Rear Cross Traffic
Alert.
The system notifies the driver when vehicles in
the blind area are approaching from behind in the
neighboring lanes.
BSD/RCTA approach
indicator light
H Heated Steering Wheel system (if equipped)
The Heated Steering Wheel system warms the surface
of the steering wheel at a constant temperature.
Pull
14
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.Seat heater (if equipped)
1 HI : Rapid heating
1 2 LO : Normal heating
2
Moonroof switches (if equipped)
Tilting Sliding
1 Up 1 Open
2 Down 2 Close
1 1
2 2
X-mode switch (if equipped)
X-mode assists driving more comfortably even in slippery road conditions including uphill
and downhill.
X-mode switch X-mode indicator
X-mode has the following functions.
Hill descent control function : Using this function, you can keep the vehicle at a
consistent speed driving downhill. If the vehicle speed
is likely to increase, the brake control system will be
activated to adjust the vehicle speed.
Driving ability control : This mode increases the hill-climbing ability and driving
ability as well as enabling smooth application of torque for
easier control of the steering wheel.
15Lane Departure Warning OFF switch (Models with EyeSight system)
Press and hold this switch for approximately 2
seconds or longer to turn off the Lane Departure
Warning and Lane Sway Warning functions.
Lane Departure Warning
This function warns the driver if the system detects that the vehicle is likely to depart the
traffic lane when the vehicle speed is approximately 50 km/h (30 MPH) or more.
Pre-Collision Braking System OFF switch (Models with EyeSight system)
Press and hold this switch for approximately 2
seconds or longer to turn off the Pre-Collision
Braking System and Pre-Collision Throttle
Management.
Pre-Collision Braking System
The EyeSight system warns the driver to help prevent or minimize a collision when there
is a risk of collision with an obstacle detected in front. If the driver does not take evasive
action after the obstacle is detected, the brakes will be automatically applied in order to
reduce impact damage, or if possible, prevent the collision. If the driver takes evasive
action to avoid the collision, Pre-Collision Brake Assist will operate in order to assist the
driver to prevent the collision.
16
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.MAIN WARNING AND INDICATOR LIGHTS
Some warning/indicator lights illuminate for a few seconds in order to check themselves
when the ignition switch is turned ON.
Warning lights
Refer to your Owner’s Manual for countermeasures when each warning light comes on.
If necessary, consult your authorized SUBARU dealer.
Seatbelt warning Charge warning
Remind the driver to fasten Charging system malfunction.
seatbelt.
Front passenger’s seatbelt warning CHECK ENGINE warning/Malfunction indicator
PASS Remind the front passenger to Engine/Emission control system
fasten seatbelt. malfunction.
Oil pressure warning Engine low oil level warning
The engine oil pressure is too The engine oil level decreases to
low. the lower limit.
All-wheel Drive warning (CVT models) SRS airbag system warning
Tires of different diameter fitted/ SRS airbag system and/
air pressure excessively low. or seatbelt pretensioners
malfunction.
Power steering warning AT OIL TEMP warning (CVT models)
The electric power steering Transmission fluid temperature
system malfunction. is too hot./Transmission control
system malfunction.
Door open warning Low fuel warning
Any door or the rear gate is not Fuel tank is nearly empty. Refill
fully closed. fuel immediately.
Brake system warning
Parking brake on/Low brake fluid level/EBD System malfunction.
(Anti-lock Brake System warning light illuminates simultaneously)
17Windshield washer fluid warning
The fluid level in the windshield washer fluid tank decreases to the lower limit.
Access key warning
The access key is not inside the vehicle. For other situations, refer to your
Owner’s Manual.
Automatic headlight beam leveler warning
Automatic headlight beam leveler malfunction.
ABS warning
Anti-lock Brake System malfunction/EBD System malfunction (Brake System
warning light illuminates simultaneously).
BSD/RCTA warning
Blind Spot Detection/Rear Cross Traffic Alert (BSD/RCTA) malfunction.
Hill start assist warning/Hill start assist OFF indicator
Warning : Hill start assist system malfunction.
Indicator : Hill start assist system OFF.
Vehicle Dynamics Control warning/Vehicle Dynamics Control operation indicator
Warning : Vehicle Dynamics Control system malfunction.
Indicator : Flashes during activation of the skid suppression function and the
traction control function.
Steering responsive headlight warning/
Steering responsive headlight OFF indicator
Warning : The steering responsive headlight system malfunction.
Indicator : The steering responsive headlight system is deactivated.
Coolant temperature low indicator/Coolant temperature high warning
llumination in BLUE : Insufficient warming up of the engine.
Illumination/blinking in RED : Engine overheating/almost overheating.
Blinking in RED and BLUE alternately : Electrical system malfunction.
18
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please refer to your Owner’s Manual.Icy road surface warning screen
When the outside temperature becomes 3°C (37°F) or less, the icy road surface
warning screen interrupts to inform the driver that the road surface may be
frozen.
RAB warning
Reverse Automatic Braking System malfunctions.
Indicator lights
The following indicators show the current status of your car. Refer to your Owner’s Manual
for more information.
Turn signal Headlight High beam
indicator indicator indicator
Front fog light Security BSD/RCTA OFF
indicator indicator indicator
Front passenger’s frontal Vehicle Dynamics
airbag ON/OFF indicators Control OFF indicator
Cruise control indicator Cruise control set indicator
RAB OFF indicator High beam assist indicator
Hill descent control indicator X mode indicator
Lane Departure Warning OFF Pre-Collision Braking System
indicator OFF indicator
19subaru.ca
All illustrations, specifications, features and photographs contained in this brochure are based on product information available at the time of
its printing, and may not be completely accurate following its publication. Colours shown may vary due to reproduction variations in the printing
process, and some vehicle parts cannot be shown in certain photographs. Subaru Canada, Inc. reserves the right to discontinue or make changes
at any time, without notice or incurring obligations, to colours, materials, equipment, accessories, features, specifications and models, or to change
their prices. Please visit our Web site for the latest information and specifications. For detailed operating and safety information, please consult
your Owner’s Manual. For complete details on product updates, warranties or the Subaru C.A.R.E. program, please contact your Subaru dealer.
Crosstrek and Subaru are registered trademarks. Printed in Canada. © 2017 Subaru Canada, Inc. 2018 model year.
Environmental Management System (EMS)
ISO 14001:2004 certified by SGS
www.subaru-earth.com
SUBARU CANADA, INC./SUBARU CORPORATION
06.17 SBQRGCRO18EYou can also read
