YOUR GUIDE TO THE EMPLOYER-LED SUPERVISED SELF-SWAB (ESSS) - FOR USE WITH ABBOTT PANBIO ART SELF-TEST KIT - NEA
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
YOUR GUIDE TO THE
EMPLOYER-LED
SUPERVISED
SELF-SWAB (ESSS)
FOR USE WITH ABBOTT PANBIO
ART SELF-TEST KIT
STE P 1
Preparing ART Kits
for Distribution
I M PO RTANT N OTE S
FO R PACK I N G
Wash and dry your Put on your surgical
hands thoroughly. mask, face shield and
disposable gloves.
2m
Refrain from talking, Keep all unused items
and maintain a safe distance in a clean storage box.
of 2m if there is more than
1 packing staff.
STE P 1
Preparing ART Kits
for Distribution
PACKING THE ART KITS
Check expiry date of the test kits
before packing.
In the ART bulk box that you have received,
you will only need these 4 items.
Test cartridge Buffer bottle
(able to fill up to
25 extraction tubes)
Extraction tube Sterile
and blue cap swab stick
Fill-line
1 2 3
CLEAN PACKING PREPARE THE PLACE ITEMS INTO
SURFACE WITH A EXTRACTION TUBE A NEW, CLEAN BAG
70% ALCOHOL WIPE Take the cap off the buffer bottle. Test cartridge, prefilled
Hold the buffer bottle vertically and extraction tube and
fill the extraction tube with the swab stick
buffer fluid until it reaches the
fill-line of the extraction tube. Close
the extraction tube with the blue cap.
STE P 2
Preparing for ESSS
1 2
PUT ON YOUR SURGICAL CLEAN SURFACE WITH
MASK AND FACE SHIELD A 70% ALCOHOL WIPE
3 4
PLACE A HAND SANITISER GET THE EMPLOYEE
AND MIRROR ON THE TO LAY OUT THE
CLEANED SURFACE TEST KIT ITEMS
3m
Keep a 3m distance
from the employee who
is doing the self-swab.
If it’s virtual supervision via Zoom or
Tuas
14 Sep, 2021 6:06 PM Edit
I M PO RTANT Whatsapp video, please take note of
employee’s results by getting them to
show it to you on the camera after the
test results appear in 15 minutes.
REFER TO THE NEXT PAGE FOR SELF-SWAB
INSTRUCTIONS FOR EMPLOYEESS E LF -SWAB I N STR UC TION S
For ABBOTT PANBIO
Antigen Rapid Test
Remove swab stick Insert the swab stick
1 Please clean your 2 Before starting the 3 from package. 4 into the nostril
hands before starting test, please take out 1
the test. Swab stick, 1 Test cartridge (~2cm) while gently
and 1 Extraction tube. Take rotating. Twirl the stick 5
the test cartridge out from times while in the nostril.
its packaging.
Test cartridge
Extraction tube
2.0cm
Swab stick
5 Repeat for the other 6 Swirl the swab tip in 7 Squeeze the tube to 8 Break the swab stick
nostril with the same the buffer fluid against extract the sample. at the breakpoint and
swab stick. the walls of the extraction leave the swab stick in the
tube for at least 5 times. tube. Close the cap of the
extraction tube.
x5
2.0cm
9 Use your finger to 10 Open the nozzle cap 11 Squeeze 5 drops of 12 Wait for 15 minutes
gently tap the side of at the bottom of the the solution in the before checking the
the tube a few times. This extraction tube. sample well of the test results on the test cartridge.
helps to mix the solution. cartridge. Close the nozzle Please keep the cartridge
cap once you are done. on a flat surface during
this time.
5 drops
15 MINS
13 Read the results on the test cartridge.
If you see a line appearing at both the If you see a line appearing at If you see a line appearing at only the
“C” and the “T” position, this indicates a only the “C” position, this “T” position, the test is invalid.
positive test. Please seek medical indicates a negative test. Please repeat the test with a new test kit.
attention for further evaluation and
confirmatory testing.
POSITIVE NEGATIVE INVALID
“C” Control Line “C” Control Line “C” Control Line
“T” Test Line “T” Test Line “T” Test Line
14 Dispose all used items in the test kit 15 Clean your hands
into one plastic bag and tie it up with a after the test.
rubber band or cable tie. Place the tied bag
into another plastic bag and tie the second
plastic bag with a rubber band or cable tie.
Throw it into the rubbish chute immediately. You may also
scan this QR
code for video
instructionsSTE P 3
Uploading ART results on SRS
Results will be uploaded by Swab Supervisors
1 COVID-19 SELF
3
a. Access the results
TESTING PORTAL a. A confirmation page will
uploading site via appear. Get the employee
your company to verify that their details
specific SRS link. and test results are
correct.
S1234567A
b. Follow the
instructions on the b. Click Confirm.
site to fill up the
necessary details.
91234567
c. Click Verify when all 91234567
details have been
filled up.
ABBOTT PANBIO
S1234567A
John Tan
2
a. Scan QR code of
employee to register. Hi, John Tan
b. When test result is
available, click
Pending Result for
that employee.
ABBOTT PANBIO
c. Input test results.
d. Click Submit.
JOHN TAN
S1234567A
Hi, John Tan
Upon successful
submission, you will
Fatimah Ali, XXXXX123A
get a message and
your employee will
receive an SMS with
Arun Devan, XXXXX456B
their results.CH ECK LI ST
Items you will need:
STEP 1 — PACKING ART KITS FOR DISTRIBUTION
Pre-test day
HAND SANITISER DISPOSABLE GLOVES
70% ALCOHOL WIPES CLEAN BAGS FOR
PACKING ART KITS
SURGICAL MASK
ART KITS BULK BOX
FACE SHIELD
STEP 2 — PREPARING FOR ESSS
Day of testing
70% ALCOHOL WIPES TISSUE PAPER
SURGICAL MASK ART KITS FOR
EMPLOYEES
FACE SHIELD Employer can choose to
place test kit items in a
HAND SANITISER plastic bag or container
for employee’s use.
RUBBISH BIN
WITH COVER FOR MIRROR
WASTE DISPOSAL Optional if employees
need small table top.
Including rubbish bags
and cable ties.
STEP 3 — UPLOADING ART RESULTS ON SRS
Day of testing
MOBILE DEVICE EMPLOYEE’S
TEST RESULTS
YOUR COMPANY
SPECIFIC SRS LINKYou can also read
