NEW PRODUCTS WURTH AUSTRALIA - NEW ADDITIONS TO OUR ASSORTMENT RANGE - YTD 1st March 2021 - Würth IT GmbH
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
NEW ADDITIONS TO OUR ASSORTMENT RANGE... NEW PRODUCTS WURTH AUSTRALIA YTD 1st March 2021
POCKETSIZE POWER! MOBILE ORDERING, SDS ACCESS, TECHNICAL INFORMATION AND MORE ... THE WURTH APP! GET IT TODAY. Page 2 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
TOUGH ON THE OUTSIDE,
HELPFUL ON THE INSIDE!
USEFUL ASSORTMENTS IN THE
PRACTICAL SYSTEM CASE.
Everything in one place, where you need it: With the new
ORSY® system cases, you simply take your assortments with you
to where you need them. Flexible and adapted to your needs. 100% SYSTEM.
If you are well organised, you spend less time searching and
gain more time for the important things.
0% STRESS.
Page 3 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
SCREWLESS HOSE 1-EAR CLAMP FLAT HEAD SCREW WITH
CLAMP ASSORTMENT ASSORTMENT HEXALOBULAR HEAD
511 PCS 481 PCS ASSORTMENT 1060 PCS
Description Art. No. Qty Description Art. No. Qty Description Art. No. Qty
8 - 9 mm 0541 001 075 50 5.2 - 6.2 mm 0541 066 40 M4 x 10 mm 4004 64 10 100
8.5 - 9.5 mm 0541 001 080 50 5.6 - 6.5 mm 0541 070 40 M4 x 12 mm 4004 64 12 100
9 - 10 mm 0541 001 085 50 6.3 - 7.5 mm 0541 080 40 M4 x 16 mm 4004 64 16 100
9.5 - 10.5 mm 0541 001 090 50 7.0 - 8.5 mm 0541 090 40 M4 x 20 mm 4004 64 20 100
11 - 12 mm 0541 001 105 50 8.0 - 9.5 mm 0541 100 40 M5 x 10 mm 4004 65 10 100
11.5 - 12.5 mm 0541 001 110 50 9.1 - 10.8 mm 0541 113 40 M5 x 12 mm 4004 65 12 100
12.5 - 14.0 mm 0541 001 120 45 9.8 - 11.8 mm 0541 123 40 M5 x 16 mm 4004 65 16 100
13.5 - 15.0 mm 0541 001 130 40 11.1 - 13.1 mm 0541 138 40 M5 x 20 mm 4004 65 20 50
14.5 - 16.0 mm 0541 001 140 35 11.8 - 13.8 mm 0541 145 40 M6 x 12 mm 4004 66 12 50
15.5 - 17.0 mm 0541 001 150 35 12.8 - 14.8 mm 0541 155 30 M6 x 16 mm 4004 66 16 50
16.5 - 18.0 mm 0541 001 160 30 13.2 - 15.8 mm 0541 165 25 M6 x 20 mm 4004 66 20 50
18.5 - 20 mm 0541 001 180 25 14.6 - 16.8 mm 0541 175 25 M6 x 25 mm 4004 66 25 50
Crimp pliers 0714 577 117 1 16.5 - 18.8 mm 0541 195 25 M8 x 16 mm 4004 68 16 30
18.0 - 20.3 mm 0541 210 15 M8 x 20 mm 4004 68 20 30
Monier pliers 0715 02 04 1 M8 x 25 mm 4004 68 25 30
M8 x 30 mm 4004 68 30 20
Art. No. 5964 054 300 Art. No. 5964 054 100 Art. No. 5964 400 401
Cat. Page 10 2036 Cat. Page 10 2036 Cat. Page 10 2036
Page 4 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
HEXAGONAL BOLT WITH COUNTERSUNK HEAD COUNTERSUNK HD
THREAD UP TO HEAD SCREW WITH HEX HEAD SCREW WITH HEX
ASSORTMENT 685 PCS 1140 PCS SOCKET 1075 PCS
Description Art. No. Qty Description Art. No. Qty Description Art. No. Qty
M6 x 12 mm 0096 6 12 100 M4 x 12 mm 4012 64 12 100 M4 x 10 mm 0100 4 10 100
M6 x 16 mm 0096 6 16 100 M4 x 16 mm 4012 64 16 100 M4 x 16 mm 0100 4 16 100
M6 x 20 mm 0096 6 20 100 M4 x 20 mm 4012 64 20 100 M4 x 20 mm 0100 4 20 100
M6 x 25 mm 0096 6 25 80 M4 x 25 mm 4012 64 25 100 M4 x 25 mm 0100 4 25 100
M8 x 16 mm 0096 8 16 80 M5 x 12 mm 4012 65 12 100 M5 x 10 mm 0100 5 10 100
M8 x 20 mm 0096 8 20 50 M5 x 16 mm 4012 65 16 80 M5 x 16 mm 0100 5 16 100
M8 x 25 mm 0096 8 25 50 M5 x 20 mm 4012 65 20 80 M5 x 20 mm 0100 5 20 100
M8 x 30 mm 0096 8 30 40 M5 x 25 mm 4012 65 25 80 M5 x 25 mm 0100 5 25 75
M10 x 20 mm 0096 910 20 25 M6 x 12 mm 4012 66 12 80 M6 x 10 mm 0100 6 10 50
M10 x 25 mm 0096 910 25 25 M6 x 16 mm 4012 66 16 60 M6 x 16 mm 0100 6 16 50
M10 x 30 mm 0096 910 30 20 M6 x 20 mm 4012 66 20 60 M6 x 20 mm 0100 6 20 50
M10 x 40 mm 0096 910 40 15 M6 x 25 mm 4012 66 25 50 M6 x 25 mm 0100 6 25 50
M8 x 16 mm 4012 68 16 50 M8 x 16 mm 0100 8 16 25
M8 x 20 mm 4012 68 20 40 M8 x 20 mm 0100 8 20 25
M8 x 25 mm 4012 68 25 30 M8 x 25 mm 0100 8 25 25
M8 x 30 mm 0100 8 30 25
Art. No. 5964 009 600 Art. No. 5964 401 200 Art. No. 5964 010 000
Cat. Page 10 2037 Cat. Page 10 2037 Cat. Page 10 2037
Page 5 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
SCREW, FLATTENED HALF BODY SEALING PLUGS
ROUND HEAD, WITH COLLAR ASSORTMENT
AND HEX SOCKET 1000 PCS 200 PCS
Description Art. No. Qty Description Art. No. Qty
M4 x 8 4253 64 8 100 14 mm 0561 114 25
M4 x 12 4253 64 12 100 18 mm 0561 116 25
M4 x 16 4253 64 16 100 18 mm 0561 518 25
M4 x 20 4253 64 20 100 20 mm 0561 520 25
M4 x 25 4253 64 25 100 22 mm 0561 522 25
M5 x 10 4253 65 10 100 25 mm 0561 525 25
M5 x 12 4253 65 12 100 28 mm 0561 528 25
M5 x 16 4253 65 16 100 30 mm 0561 668 1 25
M5 x 20 4253 65 20 50
M5 x 25 4253 65 25 50
M6 x 10 4253 66 10 50
M6 x 12 4253 66 12 50
M6 x 16 4253 66 16 50
M6 x 20 4253 66 20 50
M6 x 25 4253 66 25 50
100% SYSTEM.
Art. No. 5964 425 300
Cat. Page 10 2038
Art. No. 5964 056 103
Cat. Page 10 2038 0% STRESS.
Page 6 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
3/8 INCH SOCKET WRENCH ASSORTMENT - 42 PCS Contents: 42 pcs. • 1 x ratchet, 75 mm extension, 250 mm extension, cardan joint • 14 socket wrench inserts, short: Sizes 8, 9, 10, 11, 12 ,13, 14, 15, 16, 17, 18, 19, 21, 22 • 8 socket wrench inserts, long: Sizes 8, 10, 13, 16, 17, 18, 19, 21 • 8 socket wrench inserts:E 5, 6, 7, 8, 10, 11, 12, 14 • 8 TX socket wrench inserts: TX 15, 20, 25, 27, 30, 40, 45, 50 Designation Art. No. P. Qty. Designation Art. No. P. Qty. Reversible ratchet 3/8 inch Length 175 mm 0712 038 0 1 3/8 inch extension Length 250 mm 0713 128 110 3/8 inch socket wrench insert 8 mm 0713 121 108 3/8 inch cardan joint Length 55 mm 0713 128 301 3/8 inch socket wrench insert 9 mm 0713 121 109 3/8“ socket wrench insert E5; Length 26 mm 0715 122 05 3/8 inch socket wrench insert 10 mm 0713 121 110 3/8“ socket wrench insert E6; Length 26 mm 0715 122 06 3/8 inch socket wrench insert 11 mm 0713 121 111 3/8“ socket wrench insert E7; Length 26 mm 0715 122 07 3/8 inch socket wrench insert 12 mm 0713 121 112 3/8“ socket wrench insert E8; Length 26 mm 0715 122 08 1 3/8 inch socket wrench insert 13 mm 0713 121 113 3/8“ socket wrench insert E10; Length 26 mm 0715 122 10 3/8 inch socket wrench insert 14 mm 0713 121 114 3/8“ socket wrench insert E11; Length 26 mm 0715 122 11 3/8 inch socket wrench insert 15 mm 0713 121 115 3/8“ socket wrench insert E12; Length 26 mm 0715 122 12 3/8 inch socket wrench insert 16 mm 0713 121 116 3/8“ socket wrench insert E14; Length 26 mm 0715 122 14 3/8 inch socket wrench insert 17 mm 0713 121 117 3/8-inch socket wrench TX15; Length 50.5 mm 0715 12315 3/8 inch socket wrench insert 18 mm 0713 121 118 3/8-inch socket wrench TX20; Length 50.5 mm 0715 123 20 3/8 inch socket wrench insert 19 mm 0713 121 119 3/8-inch socket wrench TX25; Length 50.5 mm 0715 123 25 3/8 inch socket wrench insert 21 mm 0713 121 121 3/8-inch socket wrench TX27; Length 50.5 mm 0715 123 27 3/8 inch socket wrench insert 22 mm 0713 121 122 3/8-inch socket wrench TX30; Length 50.5 mm 0715 123 30 3/8“ socket wrench insert, metric 8 mm 0713 122 108 3/8-inch socket wrench TX40; Length 50.5 mm 0715 123 40 3/8“ socket wrench insert, metric 10 mm 0713 122 110 3/8-inch socket wrench TX45; Length 50.5 mm 0715 123 45 3/8“ socket wrench insert, metric 13 mm 0713 122 113 3/8-inch socket wrench TX50; Length 50.5 mm 0715 123 50 3/8“ socket wrench insert, metric 16 mm 0713 122 116 3/8“ socket wrench insert, metric 17 mm 0713 122 117 3/8“ socket wrench insert, metric 18 mm 0713 122 118 3/8“ socket wrench insert, metric 19 mm 0713 122 119 3/8“ socket wrench insert, metric 21 mm 0713 122 121 Art. No. 0965 12 42 3/8 inch extension 3/8 inch; Length 75 mm 0713 128 103 Cat. Page 12 0564 Page 7 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
CARTRIDGE GUN 24:1
Robust and semi-open manual cartridge
application gun for highly viscous
adhesives and sealants.
• Transmission ratio 24:1.
• Semi-open ring allows easy insertion of the
cartridge with nozzle .
• Immediate power transmission to the push rod
possible.
• Easy to clean.
Art. No. 0891 310 10
P. Qty. 1
Design High-quality
Colour Black, Grey, similar to RAL 7042
Art. No. 0891 310 10
Application area:
Cat. Page 12 6559
For applications with 290 ml to 310 ml cartridges.
Page 8 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
PACK GUN 24:1 TO 600 ML
Robust manual sausage pack applicator
gun 24:1 up to 600 ml for highly viscous
adhesives and sealants. Can be converted
for cartridges
• Transmission ratio 24:1
• By simply unscrewing the blue pack piston, also
suitable for processing 290 to 310 ml cartridges
• Immediate power transmission to the push rod
possible
• Easy to clean
Art. No. 0891 400 620
P. Qty. 1
Design For 600 ml bags, For 300 ml bags
Application area: Art. No. 0891 400 620
For processing pouches up to 600 ml and, after conversion, cartridges from 290 ml to 310 ml Cat. Page 12 6559
Page 9 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
100 YEARS STRONG
WURTH’S STRONGEST ANCHOR
Pure epoxy mortar with a long processing time, ideal for large anchoring
depths and drilling holes as well as high tempera-tures. For compound
anchor, concrete and reinforcement attachment with subsequent mortaring
(REBAR)
Two-component reactive resin mortar, pure Reinforcement attachment with subsequent
epoxy, styrene-free. mortaring.
Individual attachment in cracked and non- Anchoring of threaded rods in natural stone
cracked concrete, seismic performance (without approval/evaluation)
category C1 (M8 to M30) and C2 (M12 to
M24): Additional nozzle for 585 ml and
Anchor rod W-VI-A, anchor rod W-VD-A, standard 1,400 ml - 0903 488 103.
threaded rod with acceptance test certificate 3.1,
Cat. Page 06 2145
female thread anchor W-VI-IG.
DESIGNED FOR 100 YEARS’ SERVICE LIFE OF THE FASTENINGS –
NOT ONLY OUTPERFORMING, BUT SURPASSING THE STANDARD
50 YEARS.
585 ml Cartridge 1400 ml Cartridge
Art. No. 5918 605 585 Art. No. 5918 605 140
Page 10 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.SCREWDRIVER SET TX - 8 PCS
Suitable for all TX head
screws.
Scope of delivery:
1 x screwdriver set TX 8 pcs,
Art. no. 06139348
Blade: Round blade, brushed
chromium-plated, tip: TX socket,
Black Point
Contents for Art. No. 0613 934 8 Art. No. P. Qty.
TX screwdriver 10 0613 434 10
TX screwdriver 15 0613 434 15
TX screwdriver 20 0613 434 20
TX screwdriver 25 0613 434 25
1
TX screwdriver 27 0613 434 27
TX screwdriver 30 0613 434 30
TX screwdriver 40 0613 434 40 Art. No. 0613 934 8
TX screwdriver 45 0613 434 45 Cat. Page 12 1546
Page 11 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.TX SCREWDRIVER ASSORTMENT WITH HOLE - 7 PCS
Ideal for all security TX screw
heads.
Blade: Circular blade, brushed chromium-
plated Output: For TX socket screws with
locking pin, Black Point
Contents: 7 pcs.
7 TX screwdrivers with hole TX 10, 15,
20, 25, 27, 30, 40
Contents for Art. No. 0613 934 87 Art. No. P. Qty.
TX screwdriver with hole TX10 0613 434 810
TX screwdriver with hole TX15 0613 434 815
TX screwdriver with hole TX20 0613 434 820
TX screwdriver with hole TX25 0613 434 825 1
TX screwdriver with hole TX27 0613 434 827
TX screwdriver with hole TX30 0613 434 830
TX screwdriver with hole TX40 0613 434 840 Art. No. 0613 934 87
Cat. Page 12 1548
Page 12 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.SCREWDRIVER SET FOR HEXAGON HEAD SCREWS - 6 PCS
Straight drive for areas with
restricted space.
Blade: Circular blade, brushed
chromium-plated
Output: DIN 475/.
Standard: DIN 312.
Contents: 6 pieces
1 each of socket wrench, size 6, 7,
8, 10, 12, 13
Contents for Art. No. 0613 936 6 Art. No. P. Qty.
Socket wrench for hexagon head screws 6 mm 0613 436 06 1
Socket wrench for hexagon head screws 7 mm 0613 436 07 1
Socket wrench for hexagon head screws 8 mm 0613 436 08 1
Socket wrench for hexagon head screws 10 mm 0613 436 10 1
Socket wrench for hexagon head screws 12 mm 0613 436 12 1 Art. No. 0613 936 6
Socket wrench for hexagon head screws 13 mm 0613 436 13 1 Cat. Page 12 1564
Page 13 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.SCREWDRIVER SET FOR HEX SOCKET SCREWS, BALL HEAD - 6 PCS
For tight access and where
speed is needed.
Blade: Hexagon blade, brushed
chromium-plated
Output: Size similar to DIN 911
Black Point
Contents: 6 pieces
1 each of ball head screwdriver,
size 2.5; 3; 4; 5; 6; 8 mm
Contents for Art. No. 0613 915 6 Art. No. P. Qty.
Hexagon ball head screwdriver 2.5 mm 0613 415 025 1
Hexagon ball head screwdriver 3 mm 0613 415 03 1
Hexagon ball head screwdriver 4 mm 0613 415 04 1
Hexagon ball head screwdriver 5 mm 0613 415 05 1
Hexagon ball head screwdriver 6 mm 0613 415 06 1 Art. No. 0613 915 6
Hexagon ball head screwdriver 8 mm 0613 415 08 1 Cat. Page 12 1570
Page 14 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.PRECISION SCREWDRIVER SET TX - 7 PCS
Ideal for all fine and delicate screws
in electrical engineering and precision
engineering.
For optimised work in watchmaking.
Rotatable centring head with large finger recess.
Easy and rapid identification.
Centring cap marked with screw symbol and size.
Comfortable and pleasant to use.
Multi-component handle with large, soft-grip
components.
For fast rotation in the full hand
position.
Quick-action rotating zone.
Optimum corrosion protection.
Chromium-plated blades of highly tempered
special steel.
Precise fit.
Black Point tip.
Blade: Circular blade, brushed
chromium-plated.
Contents for Art. No. 0613 489 1 Art. No. P. Qty.
Precision screwdriver, TX 5 0613 482 05
Precision screwdriver, TX 6 0613 482 06
Precision screwdriver, TX 7 0613 482 07
Precision screwdriver, TX 8 0613 482 08 1
Precision screwdriver, TX 9 0613 482 09
Precision screwdriver, TX 10 0613 482 10 Art. No. 0613 489 1
Precision screwdriver, TX 15 0613 482 15 Cat. Page 12 1634
Page 15 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.WIRE STRIPPING PLIERS AS 61
Automatic gauging system, no
adjustment to cable cross-section is
necessary.
• Pistol grip/design for fatigue-free operation,
especially when working on tables and
workbenches.
• Adjustable longitudinal stop: 5–15 mm.
• Integrated cable cutters: Up to 2.5 mm2.
• Fixing device on handle end.
• Made in Germany.
Application area:
For sheath stripping PVC-insulated single-core
cables, e.g. H05V-K, H07V-K, H05V-U, H07V-U.
Notice:
Not suitable for working on or in the vicinity of
live parts.
Type description AS 61
Blade geometry V-shaped
Min./max. wire cross section 0.2-6 mm2
Min./max. American Wire Gauge (AWG) (AWG) 24-10
Length x width x height 165 x 27 x 140 mm
Material Plastic/metal Art. No. 0714 109 006
Material of the grip handle Plastic Cat. Page 12 6021
PET plastic packaging with Euro holes made of recycled plastic (PET bottles)
Page 16 New Product Specials - Offers valid from 19th February to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.CYLINDER SAW,
HSS BI-METAL LONGLIFE & SPEED HSCO8 NEW SIZES NOW AVAILABLE!
Steel/stainless steel. Extremely fast drilling speed
and long service life, even on stainless steel solid
Up to 200 mm materials.
diameter now
available! • Extremely fast sawing progress with minimal effort.
• High concentricity and side stroke accuracy.
• Very quiet and low-vibration operation to a cutting depth
of 38 mm.
Art. No. Range: 0632 900...
Cat. Page 02 0761
DIAMOND TILE DRY CORE BIT M14 SEAT NEW SIZES NOW AVAILABLE!
Specially developed diamond core drill bit for dry
drilling of even the very hardest of materials like
stoneware for use on angle grinders.
• Particularly suitable for tiles and stoneware with a thickness
of up to 15 mm. Thicker materials up to the specified working
length can still be drilled, but more frequent pauses for cooling
down will be necessary.
• Suitable for hard ceramic, thin granite and marble panels and
hard-baked bricks.
Art. No. Range: 5457 235...
Cat. Page 02 0761
Page 17 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.MANUAL SCREW TAPS NEW SIZES NOW AVAILABLE!
Taper Tap HSS, DIN 352
With trim cut form A for producing metric ISO standard threads
by hand in accordance with DIN13 in through holes and blind
holes in the steel, non-ferrous metals and cast iron material
Art. No. Range: 0640 1...
groups up to a strength of 800 N/mm2.
Cat. Page 02 2023
Second Tap HSS, DIN 352
With trim cut form D for producing metric ISO standard threads
by hand in accordance with DIN13 in through holes and blind
holes in the steel, non-ferrous metals and cast iron material
Art. No. Range: 0640 2...
groups up to a strength of 800 N/mm2.
Cat. Page 02 2024
Third Tap HSS, DIN 352
With trim cut form C for producing metric ISO standard threads
by hand in accordance with DIN13 in through holes and blind
holes in the steel, non-ferrous metals and cast iron material
Art. No. Range: 0640 3...
groups up to a strength of 800 N/mm2.
Cat. Page 02 2025
Manual Screw Tap Set HSS, DIN 352
3 pieces Consisting of a taper tap (form A), a second tap (form
D) and third tap (form C) for producing metric ISO standard
threads by hand in accordance with DIN13 in through holes and
blind holes in the steel, non-ferrous metals and cast iron material
groups up to a strength of 800 N/mm2
Type Thread Pitch Length Thread Shaft Size of Core hole Art. No. P. Qty.
type x mm mm length Dia. square diameter
Nom. (metric mm mm mm
Dia. thread) mm
- M2 0.4 36 8 2.8 2.1 1.6 0639 2
M3 0.5 40 11 3.5 2.7 2.5 0639 3
M4 0.7 45 13 4.5 3.4 3.3 0639 4
M5 0.8 50 16 4.2 0639 5
M6 1 56 19 6 4.9 5 0639 6
Hand M8 1.25 63 22 6.8 0639 8
1
tap M10 1.5 70 24 7 5.5 8.5 0639 10
set M12 1.75 75 28 9 7 10.2 0639 12
M14 30 11 12 0639 14
2 80 9
M16 32 12 14 0639 16
M18 14 11 15.5 0639 18
2.5 95 34
M20 16 12 17.5 0639 20 Cat. Page 02 2026
Page 18 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.MANUAL SCREW TAPS NEW SIZES NOW AVAILABLE!
Taper Tap HSS, DIN 2181
Taper tap with notch shape A for producing metric ISO
fine threads according to DIN 13 manually in through
holes and blind holes, in steel, non-ferrous metals and
Art. No. Range: 0642 1...
cast iron material groups up to a strength of 800 N/mm2.
Cat. Page 02 2027
Third Tap HSS, DIN 2181
Third tap with notch shape C for producing metric ISO fine
threads according to DIN 13 manually in through holes
and blind holes, in steel, non-ferrous metals and cast iron
Art. No. Range: 0642 3...
material groups up to a strength of 800 N/mm2.
Cat. Page 02 2028
Page 19 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.MACHINE SCREW TAP HSCO NEW SIZES NOW AVAILABLE!
Blue Ring Through Hole DIN 371/376
The blue ring machine tap for general, wide
ranging applications in long-chipping, non-alloyed
steels up to a strength of 850 N/mm2.
Art. No. Range: 0653...
Cat. Page 02 2062
Green Ring Through Hole DIN 371/376
The low-priced machine tap for processing
alloyed and high-alloyed steels (stainless steels),
as well as rust-resistant and acid-resistant steels.
Art. No. Range: 0645 5...
Also suitable for processing conventional steel
Cat. Page 02 2067
materials up to a strength of 850 N/mm2.
Blue Ring Blind Hole DIN 371/376
The blue ring machine tap for general, wide
ranging applications in long-chipping, non-alloyed
steels up to a strength of 850 N/mm2.
Art. No. Range: 0653 0...
Cat. Page 02 2073
Green Ring Blind Hole DIN 371/376
The low-priced machine tap for processing
alloyed and high-alloyed steels (stainless steels),
as well as rust-resistant and acid-resistant steels.
Art. No. Range: 0655 0...
Also suitable for processing conventional steel
Cat. Page 02 2074
materials up to a strength of 850 N/mm2.
Page 20 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.FULL RANGE OF STAINLESS STEEL FINISHING STAINLESS STEE
FINISHING RA L
CONSUMABLES NOW AVAILABLE! NGE
OVER 15,000
PRODUCTS
ONLINE-SHOP
www.wurth.com.a
u
FLEECE VELCRO DISC SUPPORT PLATE FOR
VELCRO DISC
For matting, burnishing,
polishing and for matching For optimal sanding results.
"pre-sanded“ metal sheets. The sanding plates are
Achieving effective surfaces, matched to the application.
cleaning oxide coatings and
removing tempering colour.
Art. No. 0585 472 180 Art. No. 0586 64...
Cat. Page 03 1665 Cat. Page 03 1674
HARD-PRESSED COMPACT
HOOK-AND-LOOP FLEECE DISC
FABRIC DISC CERALINE
For direct use on speed
Used for grinding surfaces, controllable angle and fillet
dressing, smoothing, seam grinders; offers a uniform
deburring and for welding finish without damaging the
seam machining. surface at a defined roughness.
Art. No. 0573 512 5... Art. No. 0585 012...
Cat. Page 03 1667 Cat. Page 03 1668
HARD-PRESSED COMPACT
FLEECE DISC
With fabric plate for direct use on
speed controllable angle grinders,
offers a uniform finish without
damaging the surface at a defined
roughness.
Art. No. 0585 012 348
Cat. Page 03 1676
Instructions:
Remove welding seam with riptape fabric Adjustment of the surface as well as fine sanding Satin finish with fleece folding ring.
disc and support plate with hard design. with Trizact® riptape fabric disc and support
plate with mediume duty deisgn.
Page 21 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.MANDREL M14
M14 thread for attachment to angle grinder and CLAMPING MANDREL
compatible with: 0672 911 080/100/180 and 0672 WITH QUICK-CHANGE M14 thread for attachment to angle grinder and
912 080/180. FUNCTION compatible with: 0673 23 50,
Art. No. 0702 451 010 Art. No. 0702 451 021 0672 919 080/100/180/280/400,
Cat. Page 03 1664 Cat. Page 03 1664 0672 929 080/180/280 and 0672 939 080/180.
FOLDED SANDING FLEECE RING
Burnishing roller made of folded
sanding fleece for virtually shoulder-free
line matting. With 6 mm wedge taper
and size 19 hole for surface sanding
machines and polishing machine with
clamping mandrel.
Art. No. 0672 911...
Cat. Page 03 1670 Compatible with mandrel 0702 451 010.
BURNISHING ROLLER CERALINE BURNISHING ROLLER FLEECE
Specially designed for processing Specially designed for processing
stainless steel. Removal of minor scratches, stainless steel. For virtually shoulder-
for virtually shoulder-free matting and free matting and burnishing and for
burnishing and for matching pre-sanded matching pre-sanded metal sheets.
metal sheets. Suitable for impressive Suitable for impressive surfaces,
surfaces, cleaning oxide coatings, but cleaning oxide coatings, but also for
also for removing discolouration. removing discolouration.
Art. No. 0672 939... Art. No. 0672 929...
Cat. Page 03 1671 Compatible with mandrel 0702 451 021. Cat. Page 03 1672 Compatible with mandrel 0702 451 021.
SATIN FINISHING RING CERALINE
MINI POLISHING DISC
Specially designed for processing
stainless steel. Removal of minor scratches, For high-gloss polishing or buffing of
for virtually shoulder-free matting and all polishable materials in conjunction
burnishing and for matching pre-sanded with a polishing paste.
metal sheets. Suitable for impressive
surfaces, cleaning oxide coatings, but also Compatible with
for removing discolouration. mandrel 0702 451 021.
Art. No. 0672 912... Art. No. 0673 23 50
Cat. Page 03 1673 M14 thread for attachment to angle grinder. Cat. Page 03 1666
Page 22 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.SELF ADHESIVE STAINLESS STEEL TAPE
• Uniform sanding pattern on both frame parts.
• Allows fast, simple and precise taping off.
• Simple to cut to size with ordinary household scissors.
• Simple and economical solution.
• Reusable.
Art. No. 0672 101 001
Cat. Page 03 1675
FOLD ROLLER SANDING FLEECE
Burnishing roller made of folded sanding fleece for virtually shoulder-
free line matting. With 6 mm wedge taper and size 19 hole for
surface sanding machines and polishing machine with clamping
mandrel.
Compatible with mandrel 0702 451 021.
Art. No. 0672 919...
Cat. Page 03 1669
Page 23 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.PAG OIL 100 NEW - NOW AVAILABLE!
PAG polyalkylene glycol air-conditioning compressor
oil for vehicle air-conditioning systems using R134a
refrigerant.
• Good mixing properties.
• Optimum lubrication effect.
• High degree of wear protection.
• Very hydrophobic.
• Ensures thermal stability.
Art. No. 0892 764 026
P. Qty. 1/12 Benefits:
• Excellent for R134a conversions (retro-fits)
• Reduces the possibilities of A/C problems and acts as insurance
Contents 250 ml
on used and later model cars.
Viscosity/consistency Liquid
• This product will not contaminate A/C recovery equipment.
Cat. Page 04 5002 • An inexpensive way to fix the majority of A/C system leaks.
• Able to discover larger A/C leaks with U/V (fluorescent green)
Instructions:
dye.
Top up low compressor oil according to the amount used or to the amount
• Product will not crystallise, gel up or set hard.
recommended by the vehicle manufacturer and add to the air-conditioning circuit via
the air-conditioning service units.
Application area:
For maintaining, lubricating and cooling vehicle air-conditioning
Notice:
compressors, sliding and rotating parts in the R134a air-
Do not mix with other air-conditioning compressor oils. Store so the oil is protected
conditioning circuit.
from moisture. Avoid storing in open containers..
COMPRESSOR OIL
FOR VEHICLE AIR-
CONDITIONING
SYSTEMS
Page 24 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.ASK TO SEE OUR 2020 NEW PRODUCT RE-CAP...
DID YOU MISS OUT O
MANY PRODUCTS IN N THE
DURING 2020? TRODUCED
OVER 3,000 NEW ARTICLES!
Page 25 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.RANGES EXPANDED!
COUNTERSUNK WASHER COUNTERSUNK WASHER COUNTERSUNK WASHER
Deep yellow galvanised. Deep yellow galvanised. Deep zinc plated blue.
Art. No. Range: 0457 700 1... Art. No. Range: 0457 5... Art. No. Range: 0457 700 0...
Cat. Page 06 4704 Cat. Page 06 4699 Cat. Page 06 4703
COUNTERSUNK WASHER/
WASHER ROSETTE ROSETTE SHAPE 2
Flat zinc plated blue. Stainless steel A4, plain. Brass, nickel-plated (E2J).
Art. No. Range: 0457 700 1... Art. No. Range: 0455 000 0... Art. No. 0455 608 4
Cat. Page 06 4703 Cat. Page 06 4704 Cat. Page 06 4704
ANGLED WASHER ANGLED WASHER 45°
ROSETTE SHAPE 3 30° CLT FOR HARDWOOD
A1 stainless steel. For ASSY® screws with For transferring high tensile forces
countersunk head. (high head pull-through resistance) in
Art. No. Range: 0455 6...
Cat. Page 06 4703 Art. No. 0457 700 462 wood/wood connections with ASSY
Cat. Page 06 4705 countersunk head screws.
Art. No. 0457 700 468
Cat. Page 06 4706
Page 26 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.RANGES EXPANDED!
ANGLED WASHER ANGLED WASHER 45° 45° ANGLED WASHER
45° A2 OVAL HOLE OVAL HOLE ROUND HOLE
For optimum transfer of tensile For optimum transfer of tensile loads 45° angled washer, round hole
stresses for metal/wood connections for metal/wood connections with ASSY For optimum transfer of tensile loads
with ASSY 4 or ASSY 3.0 stainless countersunk screws. for metal/wood connections with ASSY
steel countersunk head screws countersunk screws.
in outdoor areas exposed to the Art. No. Range: 0457 700 48... Art. No. Range: 0457 700 48...
elements. Cat. Page 06 4709 Cat. Page 06 4707
Art. No. Range: 0457 700 49...
Cat. Page 06 4708
HEXAGONAL BOLT WITH SHANK RANGE EXPANDED!
DIN 931 (ISO 4014)
Tensile Strength: 8.8 or 10.9
Material: Steel
Finish: Plain, Zinc or HDG.
Material: Stainless Steel
Grade: A2/304, A4/316
Cat. Page 06 5601/2 Class: 70 A2, 80 A4
PAN HEAD SCREW WITH HEXALOBULAR HD RANGE EXPANDED!
ISO 14583, steel 8.8, zinc-plated, blue passivated
(A2K).
Hexalobular drives must Increase in assembly productivity.
comply with DIN EN ISO When elements are joined using hexalobular (TX) fasteners, the
10664. force is transmitted over a large surface area across the flanks of
As a result, connection elements the drive rather than being centred on one point, as is the case
with hexalobular heads are with hexagon socket drives, for example. This has a number of
Art. No. Range: 4004 1...
standardised and can be used advantages:
Cat. Page 06 5663
all over the world. • Reduced tool wear.
• Tool does not slip because force is distributed optimally.
• No damage to surface coating.
• No wobbling.
• Screw locates securely.
Page 27 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.ASSY®PLUS 4 A2 TH GLASS STRIP SCREW,
A2 PLAIN STAINLESS STEEL, PARTIAL
THREAD, TOP HEAD 60° RANGE EXPANDED!
Special partial thread screw made of high quality,
austenitic A2 stainless steel with small top head and
milling ribs. Suitable for gap free fastening close to
edges of delicate glass strips or skirting boards in
outdoor areas constantly exposed to weathering.
Art. No. Range: 0166 13...
Cat. Page 06 3943/4
RIVET NUT, TRUSS HEAD RANGE EXPANDED!
Detachable, electrically insulating rivet connection
with vibration and noise-damping function for
fastening metal and plastic connections.
Material:
• Rivet body made of chloroprene with
brass insert.
• Hardness: 60 Shore.
Art. No. Range: 0948 75...
Cat. Page 06 2575
RIBBED NUT RANGE EXPANDED!
Nut for frame bolt in zinc-nickel, transparent
passivated (P3E) with sealant. From M12 with fine
thread.
Working principle of locking ribs: From M12 with fine thread (thread pitch 1.5 mm).
During tightening, the locking ribs roll the
counter-material in the area of the nut contact Chromium(VI) free.
surface. This causes a plastic deformation that Complies with the EU End of Life Vehicles Directive.
hardens the surface. No significant settling
Art. No. Range: 0263 92 1... is determined at the end of tightening. The Corrosion resistance.
Cat. Page 06 5103 locking ribs limit the amount of settling of the Approx. 720 hours of base metal corrosion according to DIN EN
connection and therefore reduce the loss of ISO 9227-NSS .
pretensioning force.
Page 28 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.HEXALOBULAR-TYPE CHEESE HEAD SCREW RANGE EXPANDED!
ISO 14579, steel 8.8, zinc-plated, blue passivated
(A2K).
Increase in assembly productivity.
When elements are joined using hexalobular (TX) fasteners, the
force is transmitted over a large surface area across the flanks of
Art. No. Range: 4025 1... the drive rather than being centred on one point, as is the case with
Cat. Page 06 5757/8 hexagon socket drives, for example.
THREADED ROD RANGE EXPANDED!
DIN 976-1
Surface: Hot Dip Galvanised (HDG)
Property Class: 4.6/8.8
Material: Steel
• Allows you to cut threaded studs to any length.
• Reduced storage space. Surface: Zinc
• Lengths of 1 metre only. Property Class: 4.8
Material: Steel
Cat. Page 06 6021
Material: Stainless Steel
Grade: A2/304, A4/316
Class: 70 A2, 80 A4
THREADED ROD RANGE EXPANDED!
DIN 976 & DIN 976-1
Surface: Plain, Zinc plated, Hot dip galvanized
Cat. Page 06 6022
WOOD SCREW, DIN 571 A4 HEXAGON HEAD RANGE EXPANDED!
DIN 571 A4 stainless steel.
• For secure wood connections.
• Hexagon head for improved application of force when
installing screws.
• The wood screw forms its nut thread instead of cutting.
Art. No. Range: 0191 0...
• A core hole must be pre-drilled depending on the diameter and
Cat. Page 06 3827/8
type of wood (hardwood).
Page 29 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.GRUB SCREW (PLAIN) RANGE EXPANDED!
DIN 916 (ISO 4029) Ideal for use against hardened shafts, zinc, die
With cup point. castings and soft materials. Allows for the joining
of parts in assembly where high tension and torque
Material: Stainless steel. cannot be applied.
Grade: A2/304
A4/316
Class: 80 A4
Art. No. Range: 0244... & 0296 9... 70 A2
Cat. Page 06 3503
HEXAGON SOCKET SET SCREW WITH
TRUNCATED CONE RANGE EXPANDED!
ISO 4026, steel 45H, galvanised, blue passivated
(A2K).
Steel set screws are intended for use under compressive stress
only (see also DIN EN ISO 898-5). Typical uses include clamping
in an adjusting ring or applying pressure to a counterpart.
Steel set screws are therefore extremely hard in order to ensure
torsional strength in the hexagon socket during tightening/
Art. No. Range: 0255 0... loosening.
Cat. Page 06 3504
WING-TIP DRILLING SCREW WITH
COUNTERSUNK MILLING HEAD WITH
AW DRIVE PIAS® RANGE EXPANDED!
The self-drilling screw with up to 50% time savings
when fastening wood to metal sub-structures.
• Zinc-plated steel.
• With self-tapping thread.
• Countersunk milling head for use with hard and soft woods.
Art. No. Range: 0219 12...
Cat. Page 06 3691
Page 30 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.HAMMER DRILL BIT PLUS QUADRO-L VARIO NEW SIZES NOW AVAILABLE!
The perfect solution for reinforcements
and hard materials, featuring a
symmetrical, one-piece head with four
Dia. Total Length Working Length Art. No. cutting edges and a four-spiral Vario
in mm in mm in mm feed helix with core reinforcement.
260 210 0648 051 526
15
450 400 0648 051 545 Significantly improved compatibility
with reinforcements.
Hammer drill bit Plus Quadro-L Vario
The symmetrical 4 x 90° cutting edge geometry
Assortment - 75 pieces (up to Ø 10 mm with solid carbide head)
Includes: 10mm x 15; 6mm x 30; 8mm x 30 prevents the drill bit from hooking in or running off
centre when striking e.g. reinforcements.
Noticeably quicker drilling.
The advanced tip geometry and asymmetrically
placed elevations on the cutting edges ensure
improved traction.
Art. No. 5964 648 075 Cat. Page 02 0691/2
FORSTNER DRILL BIT LONGLIFE & SPEED
The high-performance Forstner drill bit
with up to ten times higher working
speed and up to three times longer
service life than conventional Forstner
drill bits.
Length 90 mm Ideal for drilling precise, tear-free
Shaft length 30 mm holes in soft and hard woods, coated
Shank style 3-face shank chipboard and MDF boards.
Color Coding System Hardwood, Wood
Application area:
The Longlife & Speed Forstner bit can be used
Diameter Shaft diameter Art. No. either hand-guided or stationary (e.g. in CNC
12 mm 6 mm 0650 990 120 machining centres). The following cutting values
15 mm 0650 990 150 must be observed in this regard depending on the
16 mm 0650 990 160 material.
18 mm 0650 990 180
19 mm 0650 990 190
20 mm 0650 990 200
22 mm 8 mm 0650 990 220
24 mm 0650 990 240
25 mm 0650 990 250
26 mm 0650 990 260
28 mm 0650 990 280
30 mm 0650 990 300
32 mm 0650 990 320
35 mm 10 mm 0650 990 350
38 mm 0650 990 380 Cat. Page 02 0722
Page 31 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.FORSTNER BIT ASSORTMENT LONGLIFE AND SPEED
l
e cia tory 5 pieces. The high-performance Forstner
Sp duc ! bit with up to ten times higher working
r
t ro ffe speed and up to three times longer
In O service life than conventional Forstner
drill bits.
Ideal for drilling precise, tear-free
holes in soft and hard woods, coated
chipboard and MDF boards.
Recommended speeds
Bore Dia. Softwood Hardwood/MDF
> 12 mm 2400 rpm 2000 rpm
> 16 mm 2400 rpm 1500 rpm
> 25 mm 1800 rpm 1000 rpm
> 35 mm 1600 rpm 900 rpm
> 70 mm 1000 rpm 500 rpm
Number of pieces in assortment/set 5 PCS
Shank style 3-face shank
Contents for Art. No. 0650 990 001 Art. No. P. Qty.
Forest worker drill bit Longlife & speed Diameter 15 mm 0650 990 150 1
Forest worker drill bit Longlife & speed Diameter 20 mm 0650 990 200 1
Forest worker drill bit Longlife & speed Diameter 25 mm 0650 990 250 1
Forest worker drill bit Longlife & speed Diameter 30 mm 0650 990 300 1 Art. No. 0650 990 001
Forest worker drill bit Longlife & speed Diameter 35 mm 0650 990 350 1 Cat. Page 02 0722
Page 32 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.THREAD DIE HSS DIN EN 22568 FOR STANDARD METRIC ISO THREADS
Type description For metric ISO thread DIN 13 Round die in accordance with DIN EN
Cutting material HSS 22568 in closed, pre-slotted design
Surface Plain (shape B) for the production of standard
Thread type Metric thread metric ISO threads according to DIN 13
Form B in steel up to 850 N/mm2 strength and
Tolerance class 6g in cast iron.
Material to be processed Steel, Cast iron
Color Coding System Steel Two-sided cut.
• Can be used on both sides.
• Threads can be cut in one process.
• Easy cutting and excellent chip removal in
Thread type x Nom. Dia. Pitch Outer Dia. Height Colour Coding System Art. No. cutting direction.
mm mm mm
M3 0.5 0652 3 High edge retention.
5
M4 0.7 0652 4
20
M5 0.8 0652 5 Instructions:
7
M6 0652 6 The die is placed in the die holder at the height of
1
M7 0652 7 the middle screw. The screws are tightened with
25 9
M8 1.25 0652 8 a screwdriver. The die is placed vertically on the
M10 1.5 30 11 0652 10 workpiece. Can be used on both sides. When
Steel
M12 1.75 0652 12 cutting, sufficient cutting oil must be added. After
38 14
M14 0652 14 two revolutions, the cut can be broken by briefly
2
M16 0652 16 turning back.
M18 45 18 0652 18
M20 2.5 0652 20
M22 0652 22
55 22
M24 3 0652 24
Thread type x Nom. Dia. Pitch Outer Dia. Height Colour Coding System Art. No.
mm mm mm
MF4 Steel 0652 04 05
0.5 5
MF5 20 0652 05 05
-
MF6 0.75 7 0652 06 075
MF8 25 9 0652 8 1
1
MF10 0652 10 1
30 11
MF10 1.25 0652 10 125
MF12 0652 12 125
MF12 1.5 0652 12 15
38 10
MF14 1.25 0652 14 125
Steel
0652 14 15
LARGER RANGE NOW
MF14
MF16 0652 16 15
MF18
MF20
1.5
45 14 0652 18 15
0652 20 15
AVAILABLE!
MF22 0652 22 15
55 16
MF24 0652 24 15
Cat. Page 02 2021 - 2022
Page 33 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.STEEL ADHESIVE WEIGHT FOR CARS
BLACK NOW AVAILABLE!
On a roll for cut-off. Weight of balance weight 5000 g
Material Steel
• With galvanised and additionally powder-coated surface and dark Length 12.75 m
adhesive tape that is thermally stable up to 180°C. Width 19 mm
• Time savings, as no need to search for and sort out individual Height 3.8 mm
weights. Product weight (per item) 5600 g
• 1000 x 5 g segments (5 kg).
Surface Colour
Application Area: Black nickel plated Black
3.8
Can be used with any aluminium rims.
Art. No. 0830 14 427
Cat. Page 08 1509
HOLDER FOR ADHESIVE WEIGHTS ON 5-KG ROLLS
For efficient use of wheel weight rolls.
Convenient Holder
Suitable for table or wall-mounting. Also Available
Guarantees storage close to workplace.
Compact design.
• Space-saving mounting directly at the workstation.
• Space required for mounting only 8 x 16 cm. Art. No. 0830 14 990
Cat. Page 08 1509
Page 34 New Product Specials - Offers valid from 1st March to 31st March 2021• Prices exclude GST
Prices within this promotion are recommended selling prices excluding GST and will be valid while stocks last. Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.You can also read
