PRESTOTIG 220 AC/DC Portable TIG AC/DC and MMA manual welding installation for all professional applications.
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PRESTOTIG 220 AC/DC Portable TIG AC/DC and MMA manual welding installation for all professional applications. 2003-298 www.saf-airliquide.com
Technologie onduleur 3551-009 Beyond the work on non-alloy steels and stainless steels, the increasing use of aluminium in the industry requires versatile and high performance equipments for maintenance operations but also for different welding applications in manufacture. Key benefits For your aluminium TIG welding needs: • multi-process installation: - TIG AC, TIG DC - continuous, spot, pulsed welding - very complete welding cycle (double level of current) - HF or PAC system striking • using AC: adjustment of the balance: cleaning time / penetration, welding with cerium electrode 2002-543 (sharp) or with pure tungsten electrode (adjustment of the bowl) • adjustment of the pulsed function on the front panel. For operator comfort: For MMA welding (DC+, DC-, AC): • compact and light-weighted, • automatic Hot start for an easier 2003-643 • maximum safety with rest striking according the type of voltage, electrode, • user-friendliness of the control • arc dynamism adjustable for panel, optimising the electrode fusion • installation transportable with regarding type of electrode used thanks to the trolley RUNNYTIG, (rutile, basic or cellulosic). • connection of a remote control possible, For working in severe • torch connection with gas conditions: separate. • very rugged steel body. 2
The PRESTOTIG 220 AC/DC, inverter with low primary consumption is particularly well suited to severe criteria of vessel fabrication in stainless steel and light alloys. 1 Adjustment of the pulsed mode 2002-540 (cold current – cold time - hot time) 8 2 Adjustment of pre-gas – level – increase – level – 1 frequency (AC) – cleaning time - penetration 3 Adjustment of the welding parameters 2 4 Adjustment of the slope-out of the arc 3 5 Choice of the process 4 (TIG HF – TIG PAC system – MMA) 5 6 7 6 Choice of the welding mode (DC-, DC+, AC and pulsed) 7 Choice of the welding cycle ( 2S – 4S – Spot) 8 Display of the parameters of the cycle and of the welding current Technical characteristics Primary Single phase power supply 230 V - 50/60 Hz Consumption at max. current 16 A (PFC: power factor corrector) Secondary No-load voltage 95 V Duty cycle at 40 °C at 100 % 140 A 60 % 160 A 35 % 220 A Welding current 5 to 220 A (DC) 10 to 220 A (AC) (maximum 170 A with coated electrode) Welding cycles 2S - 4S - Spot Protection index IP 23 Standards EN 60974-1 Dimensional characteristics Dimensions (L x w x h) 540 x 215 x 395 mm Net weight 23.5 kg 3
Add-ons Cerium tungsten electrodes Torch with For a better penetration in fillet welding in aluminium welding built-in potentiometer (AC), we recommend to use cerium tungsten electrodes. Consult us. 1937-003 Pure tungsten electrode Cerium electrode Trolley RUNNYTIG For easier transportation : REFRISAF 220 • Light, compact and steady unit, For an optimized cooling • Loading of the bottles without • low noise cooling unit with security, effort, • very rugged steel body, • Three different fixtures to be • very easy external filling with leve suitable to every type of control visible from outside, Air Liquide gas bottles and others, • level of filling tank, • Equipped with a storage • internal components quickly (with padlocked door), accessible. • Passage of doors of L < 700 mm including rolled up cables et harness, • Reversibility of mounting for the power source and the cooling unit, 2002-550 2002-556 • 2 supports for the filler metal. 4
To order Standard offer UG 01-230 Power source delivered with 0387-1240 • a 3 m primary cable with European plug, • a 3 m earth cable with earth clamp, • a 3 m gas hose + intermediate connector, • an instruction manual. Cat. n° for packages, power source mentioned here above equipped with • cooling unit, cooling liquid, trolley and QUICKFLOW regulator 0387-1241 • with cooling unit, cooling liquid and QUICKFLOW regulator 0387-1242 • with trolley and QUICKFLOW regulator 0387-1243 Add-ons • Torch PROTIG 10 W RL C5B (250 A at 100 %) 5m 0423-0243 (others torches, see standard offer) 8m 0423-0244 • Built-in potentiometer torch consult us • Cooling unit REFRISAF 220 9157-0414 • Trolley RUNNYTIG 0387-1110 • Remote control B-BOX (not illustrated) 0320-2710 • Regulator with pre-setted flowrate QUICKFLOW 0961-1115 • Cerium tungsten electrodes Ø 2,0 0371-0533 Ø 2,4 0371-0534 Ø 3,2 0371-0537 5
Contacts SAF OERLIKON PRODUCTS LTD Low March - London Road Daventry - Northants NN 11 4 SD - England Tél.: +44 1 327 705511 Fax: +44 1 327 701310 www.saf-wp.co.uk SAF 13 rue d'Epluches The illustrations, descriptions and characteristics are provided for information purposes only and are not binding on the manufacturer. BP 70024 Saint Ouen l'Aumône 95315 Cergy Pontoise Cédex - France Tel.: + 33 1 34 21 33 33 Fax: + 33 1 34 21 31 30 www.saf-airliquide.com SAF reserves the right to modify its equipment without prior notice. © SAF 1515-0591 - 04 04 S 02 Ed. 1 Photos SAF : JSR www.airliquide.com QB : 1943 Founded in 1902 and now present in 65 countries with 31,900 employees, Air Liquide is the world leader in industrial and medical gases and related services. The Group offers innovative solutions based on constantly enhanced technologies to help manufacture many indispensable everyday products and preserve life.
You can also read