Mirka Canada Inc. PRODUCT CATALOG 2020-2021
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Table of Contents Abranet®.............................................................. 8 Sponges.............................................................. 24 Abranet® Ace .................................................. 9 Hiolit JF Belts.................................................... 25 Abranet® Ace HD........................................... 9 Hiolit XO Belts.................................................. 25 Autonet®............................................................. 10 Abranet® Max Belts....................................... 26 Golden Finish................................................... 10 Jepuflex Plus Belts......................................... 27 OSP......................................................................... 11 Sica Belts ............................................................ 27 Abralon®.............................................................. 12 Mirlon Total® .................................................... 28 Novastar™ / SR................................................. 13 Mirlon.................................................................... 28 Novastar Flex.................................................... 14 Polarshine®......................................................... 29 Microstar®........................................................... 14 Polishing Pads.................................................. 30 Polarstar® / SR................................................... 15 Grinding.............................................................. 32 Iridium.................................................................. 16 Dust Extractor.................................................. 34 Q.Silver®............................................................... 17 Dust Extractor Hoses................................... 36 Q.Silver® Micro................................................. 17 1.25" Tools......................................................... 43 Q.Silver® ACE..................................................... 18 3" Tools................................................................ 43 Gold Proflex....................................................... 18 5" Tools................................................................ 46 Goldflex-Soft..................................................... 19 6" Tools................................................................ 47 Gold Soft ........................................................... 19 8" Tools................................................................ 49 Gold....................................................................... 20 Hand Blocks...................................................... 50 Basecut® ............................................................. 22 Backup Pads...................................................... 51 Caratflex ............................................................. 22 Interface/Protector Pads........................... 55 Coarse Cut.......................................................... 23 Accessories........................................................ 56 Waterproof ....................................................... 23 Smart Carts/Trolley....................................... 58 Hiolit XO.............................................................. 24 2 mirka.com
NET ABRASIVES FILM-BACKED ABRASIVES Mirka’s innovative NET sanding concept is unlike any other. The patented Mirka’s film backing material creates a flexible and smooth abrasive construction consists of a dense network of fabric threads onto which surface, compared to paper backing. It offers outstanding performance the abrasive grit is bonded. This open weave, net structure means no on hard tooling gelcoats and scratch resistant clearcoats. dust particle is more than 0.5mm from a dust extraction hole. FOAM ABRASIVES PAPER ABRASIVES Abralon’s flexible construction creates a smooth sanding pattern on Mirka’s paper-backed abrasives are durable and well suited for high speed contoured surfaces and edges while minimizing the risk of pressure sanding in a multitude of applications. All products utilize stearate marks. The flexible weave also allows water and air to pass freely, coatings to prevent clogging which allows for the optimal sanding making it suitable for both dry and wet sanding. result. CLOTH ABRASIVES NON-WOVEN ABRASIVES Mirka’s cloth-backed abrasives are intended for machine sanding where Mirka’s non-woven abrasives are a three-dimensional sanding material, extreme durability and edge wear resistance is needed. Primarily used designed to be extremely flexible and long lasting. They can be used when large amounts of material need to be removed. wet or dry, and perform very well when profile sanding. BELTS POLISHING COMPOUNDS & PADS Mirka’s abrasive belts are designed with durability and performance in Polarshine® polishing compounds tackle any finishing job, small or large. mind; providing a smooth surface with minimal variation of the surface Pair Polashine with Mirka’s lineup of polishing pads to achieve the desired finish. The technology incorporated into the belts reduces excessive finish. surface dust and minimizes raised fibers with the highest level of efficiency. DUST-FREE SANDING Dust extractors, hoses and related accessories that help make up dust-free systems. Carts and trolleys make these systems mobile while keeping all abrasive components organized. mirka.com 3
About Mirka® Over the past thirty years, Mirka has grown into one of the world’s largest producers of coated abrasives. Today we have a wide product range for individual operations and complete sanding systems for specialized applications. Our product range includes not only abrasives, but tools and accessories, as well as polishing components. Our company philosophy can be described as striving for continuous improvements, systematic investments in quality, cost awareness, careful planning, the ability to take action and openness to unique solutions. Safety Warnings These symbols are found on all Mirka SOPs, as well as the product packaging for Mirka abrasives. Specific requirements for personal protective equipment (PPE) are presented in many different OSHA standards, published in 29 CFR. Wear appropriate eye and face protection and ensure that the selected form of protection is appropriate to the work being performed and properly fits each worker exposed to the hazard. Use gloves specifically designed for the hazards and tasks found in the workplace. The nature of the hazard and the operation involved will affect the selection of gloves. If engineering and work practice controls do not lower employee exposure to workplace noise to acceptable levels, employees must wear appropriate hearing protection. Selecting the right respirator requires an assessment of all the workplace operations, processes or environments that may create a respiratory hazard. Read and follow all instructions contained in Technical Data Sheets and User Manuals. The User is responsible for determining whether the Mirka product is fit for a particular purpose and suitable for the User’s application. The User is also responsible for complying with any applicable safety and health-related regulations and taking any safety and health-related precautions when using Mirka products. This includes, but is not limited to: wearing safety glasses, face masks, gloves, and protective clothing, if necessary; following instructions and warning labels; and operating Mirka products safely including at safe operating speeds. By User’s purchase or use of Mirka products, User acknowledges, represents, and warrants that User will: (a) comply with the foregoing; (b) assume all risks in connection with the use of Mirka products; and (c) read and understand the Mirka Warranty Policy. 4 mirka.com
Industries + Applications Auto Wood Industrial Marine/ Glass Construction/ Composite Decoration Symbols Discs File sheets Sheets Pads Rolls Delta Narrow belts Wide belts Portable belts Pump sleeves Net discs Net pads Net file sheets Net rolls SR discs Vacuum discs Multihole discs Multihole file sheets Product Number Reference Guide Product numbers are by series, configuration and grit. The last digits of the product number are the GRIT (XXX). EX. 9A-203-XXX = 9A-203-800 represents Abranet®, 3" disc, P800 23-647-XXX = 23-647-320 represents Gold, 5" vacuum disc, P320 FM-611-XXX = FM-611-2500 represents Microstar®, 6" vacuum disc, P2500 For part numbers without dashes - the last two digits XX are the GRITS (ex. Polarstar, FA622050XX) 80 = P80, 10 = P100, 12= P120, 15= P150, 18 = P180 , 25= P240, 32 = P320, 41 = P400, 51 = P500, 61 = P600, 81 = P800, 92 = P1000, 93 = P1200, 94 = P1500, 95 = 2000, 96 = 2500 Visit mirka.com for general information on Mirka’s products and systems mirka.com 5
WARRANTY POLICY WARRANTY Mirka Canada Inc. (“Mirka”) warrants that the following Mirka products will be free from defects in material or workmanship from the date of purchase for the time period indicated: a. Mirka tools have a two year warranty starting from the date of purchase. By registering your Mirka tool within 30 days from purchase you will obtain an additional one year warranty. 2 years * b. Tools used in a continuous industrial environment are excluded from the 2+1 warranty, and will be covered for 1 year only. The battery pack and charger included with the tool purchase are covered by the 2+1 year warranty program. The warranty does not cover parts bought separately. Battery is warranted for 2+1 years or 300 charges from the date of purchase, whichever first occurs. * By registering an electric tool within 30 days of purchase at www.mirka.com/warranty_registration/ Mirka will warrant the product for an additional one year. TERMS AND CONDITIONS The purchase of any Mirka product will constitute and be deemed to be acceptance of and agreement to the Mirka Warranty Policy (“Policy”) by the purchaser and/or user (collectively “User”) of any Mirka product. The Policy shall not apply to: • Normal wear and tear; or - Careless or unsafe handling; • Product failure or damages caused by: - Inadequate or improper maintenance; - Subsequent modification of the Mirka product; - Failure to follow any applicable instructions for the Mirka product; or - Repairs attempted or made on the Mirka product - Anything other than defects in material or workmanship. other than by Mirka; - Battery (with more than 300 charges) - Misuse, abuse or neglect; Mirka’s sole obligation under this Policy shall be, at Mirka’s option, fit for a particular purpose and suitable for the User’s application. The to: (1) repair or replace any Mirka product that is defective in User is also responsible for complying with any applicable safety and material or workmanship; or (2) refund the purchase price of the health-related regulations and taking any safety and health-related Mirka product that is defective in material or workmanship. precautions when using Mirka products. This includes, but is not The User is responsible for determining whether the Mirka product is limited to: wearing safety glasses, facemasks, gloves, and protective POLITIQUE DE GARANTIE GARANTIE Mirka Canada Inc. (« Mirka ») garantis que les produits Mirka suivants seront exempts de tout vice de matière ou de fabrication à compter de la date d’achat, et ce, pour la durée indiquée : a. Tous les outils Mirka sont garantis deux ans à compter de leur date d’achat. En enregistrant votre outil Mirka dans les 30 jours suivant son achat, vous obtiendrez un an de garantie supplémentaire. 2 ans * b. Les outils de façon continuelle dans un environnement industriel ne seront pas couverts par la garantie 2 + 1, mais seulement pour une période d’un an. Le batterie et le chargeur compris avec l’achat de l’outil sont couverts par la garantie 2+1. La garantie ne couvre pas les pièces achetées séparément. La pile est garantie pour 2+1 année ou encore pour 300 charges à partir de la date de l’achat, le premier des deux prévalant. * En enregistrant un outil électrique dans les 30 jours suivant l'achat à www.mirka.com/fr-CA/ca/QC_Top-Menu/Enregistrement-de-la-Garantie/ Mirka garantira le produit pour un an supplémentaire. MODALITÉS ET CONDITIONS L’achat de tout produit Mirka constituera et sera réputé être l’acceptation de la Politique de garantie de Mirka (« Politique ») et le consentement à y être lié par l’acheteur ou l’utilisateur (collectivement l’« Utilisateur ») de tout produit Mirka. La Politique ne s’applique pas : • à l’usure normale; ou - Maintenance inadéquate ou incorrecte; le non-respect des • au défaut du produit ou aux dommages causés par : instructions s’appliquant au produit Mirka; ou - Une modification subséquente du produit Mirka; - Toute autre chose qu’un défaut de matière ou de fabrication. - Des tentatives de réparation ou des réparations effectuées sur le - Batterie (avec plus de 300 charges) produit Mirka autrement que par Mirka; - Un mauvais usage, un abus ou une négligence; - Négligence ou la gestion non sécurisée; La seule obligation de Mirka en vertu de cette garantie sera, au gré de appartient à l’Utilisateur de déterminer si le produit Mirka convient à un Mirka, de : (1) réparer ou remplacer tout produit Mirka présentant un usage particulier et à l’application envisagée par l’Utilisateur. Il incombe défaut de matière ou de fabrication; ou (2) rembourser le prix d’achat également à l’Utilisateur de respecter toute réglementation de santé et du produit Mirka présentant un défaut de matière ou de fabrication.Il sécurité et de prendre toutes les mesures de santé et sécurité lorsqu’il 6 mirka.com
clothing, if necessary; following instructions and warning labels; and Any civil action against Mirka relating to or arising out of the sale of operating Mirka products safely including at safe operating speeds. Mirka products shall be commenced within one (1) year of the date By User’s purchase or use of Mirka products, User acknowledges, the cause of action accrued or otherwise the cause of action shall be represents, and warrants that User will: (a) comply with the foregoing; barred. and (b) assume all risks in connection with the use of Mirka products. No agent, representative, employee, distributor or dealer of Mirka is authorized to modify this Policy or to issue any warranty regarding any Mirka products. DISCLAMER Except for the provisions of this “WARRANTY,” Mirka expressly disclaims all guarantees and/or warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose and any implied warranty arising out of a course of dealing, custom or usage of trade. LIMITATION ON LIABILITY Mirka’s liability for any loss or damage arising out of or resulting from any breach or default by Mirka in connection with the sale of Mirka products hereunder shall not exceed the purchase price thereof, regardless of whether such liability arises in contract, tort (including, without limitation, strict liability) or otherwise. In no event shall mirka be liable for loss or damage arising from the Mirka product, whether direct, indirect, special, incidental, or consequential damages of any kind regardless of the legal theory asserted, including, without limitation, warranty, contract, negligence or strict liability. SUBMITTING A WARRANTY CLAIM To submit a warranty repair claim, Users must contact their Mirka dealer or Mirka customer support. Tools returned for warranty repair must be accompanied by a valid purchase receipt or invoice. utilise les produits Mirka. Ces mesures comprennent, mais sans s’y limiter: autorisé à modifier la présente Politique ou à donner une garantie pour porter des lunettes de protection, des masques faciaux, des gants et quelques produits Mirka que ce soit. des vêtements de protection, au besoin; suivre les instructions et lire les étiquettes d’avertissement; et utiliser de façon sécuritaire les produits Toute action civile contre Mirka en regard de ou suivant la vente de Mirka, et à des vitesses de fonctionnement sécuritaires. En procédant à produits Mirka sera engagée dans un délai d’un (1) an à compter de la l’acquisition et à l’utilisation des produits, l’Utilisateur reconnaît, déclare date où la cause de l’action a été constatée, sans quoi la cause d’action et garantit que l’Utilisateur (a) se conformera à ce qui précède; et (b) sera non avenue. assumera tous les risques inhérents à l’utilisation des produits Mirka; Aucun agent, représentant, employé, distributeur ou dépositaire n’est EXONÉRATION Exception faite des dispositions de la présente « GARANTIE », Mirka décline expressément toutes les garanties, expresses ou implicites, y compris les garanties de qualité marchande et de conformité pour un usage particulier ainsi que toute garantie implicite découlant de transactions commerciales, de pratiques commerciales courantes ou d’usages du commerce. LIMITATION DE RESPONSABILITÉ La responsabilité de Mirka pour toute perte ou tout dommage découlant ou résultant du non-respect ou du manquement de Mirka relativement aux produits Mirka faisant l’objet des présentes ne dépassera pas le prix d’achat desdits produits, peu importe que telle responsabilité découle d’un contrat, d’un tort (y compris, sans restriction, la responsabilité sans faute) ou autrement. Mirka ne pourra aucunement être responsable de toute perte ou dommage découlant du produit Mirka, qu’il s’agisse d’une perte ou d’un dommage direct, indirect, spécial ou accessoire de quelque nature que ce soit, et indépendamment de tout argument juridique invoqué, incluant sans toutefois s’y limiter, la garantie, le contrat, la négligence ou la responsabilité sans faute. SOUMETTRE UNE DEMANDE DE GARANTIE Pour soumettre une demande de réparation sous garantie, les utilisateurs doivent contacter leur concessionnaire Mirka ou soutien à la clientèle Mirka. Outils renvoyés pour réparation sous garantie doivent être accompagnées d'une preuve d'achat valide ou facture. mirka.com 7
NET ABRASIVES Abranet® - 9A Series FEATURES AND BENEFITS: High performance and long lifespan Removal of dust particles eliminates loading and pilling problems Woven mesh backing works with hook and loop attachment Net abrasives are a key component for dust-free sanding AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S 9A-223-XXX P80, P100, P120, P150, Grain Aluminum oxide 9" Grip P180, P240 Bonding Resin over resin 9A-262-XXX P80, P120, P150, P180, P240, Backing Polyamide NET 11" Grip P320, P400 Coating Closed 9A-219-XXX Color Brown P80, P120, P180, P240, P320, P400 3.9" x 6" x 6" Attachment Grip 9A-570-XXX P80, P100, P120, P180, P240, P320, 2¾" x 10 yds. Grip P400 9A-149-XXX P80, P120, P150, P180, P220, P240, AVAILABLE SIZES: AVAILABLE GRITS: 2¾" x 5" Grip P320, P400, P600 9A-150-XXX P80, P120, P180, P220, P240, P320, 9A-600-XXX P80, P120, P150, P180, P240. P320, 2¾" x 7¾" Grip P400 1¼" Grip P400 9A-151-XXX P80, P100, P120, P150, P180, P240, 9A-203-XXX P80, P120, P180, P220, P240, P320, 2¾" x 16½" Grip P320 3" Grip P400, P600 , AP 9A-129-XXX P80, P100, P120, P150, P180, P220, P80, P120, P180, P240, P320, P400 9A-232-XXX 3" x 4" Grip P240, P320, P400, P500, P600, 5" Grip P800, P1000, AP 9A-178-XXX P80, P100, P120, P150, P180, P240, 3" x 5" Grip P320, P400, P500, P600 P80, P100, P120, P150, P180, P220, 9A-241-XXX P240, P320, P400, P600, P800, 9A-110-XXX P80, P120, P180, P240, 6" Grip P1000, AP 4½" x 10 yds. Grip P320, P400 9A-252-XXX P80, P120, P180, P240, 9A-125-XXX P80, P120, P180, P240, P320, 8" Grip P320, P400, P600 4½" x 25 yds. Grip P400 8 mirka.com
Abranet® ACE - AC Series NET ABRASIVES FEATURES AND BENEFITS: Developed to achieve outstanding results on challenging surface conditioning and repair applications Well designed for metal applications Ceramic/ceramic coated grain Removal of dust particles eliminates loading and pilling problems Improved woven mesh backing offers increased strength and edge wear Net abrasives are a key component for dust-free sanding AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S AC-203-XXX P80, P220, P320, P400, P600 P800 Grain Ceramic/Ceramic coated 3" Grip Bonding Resin over resin P80, P100, P120, P150, P180, P220, AC-232-XXX Backing P240, P320, P400, P600, P800, Polyamide NET 5" Grip P1000 Coating Closed P80, P100, P120, P150, P180, P220, Color Maroon AC-241-XXX P240, P320, P400, P600, P800, 6" Grip Attachment Grip P1000 AC-178-XXX P80, P100, P120, P150, P180, P240, 3" x 5" Grip P320, P400 Abranet® ACE Heavy-Duty - AH Series FEATURES AND BENEFITS: Ceramic grains allows for maximum cutting speed and consistent performance across a variety of surfaces and substrates Coarse grit range makes this ideal for aggressive stock removal Features exceptional resistance to edge wear and clogging Net abrasives are a key component for dust-free sanding T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Ceramic AH-232-XXX P40, P60, P80 Bonding Resin over resin 5" Grip Backing Polyamide NET AH-241-XXX P40, P60, P80 Coating Closed 6" Grip Color Brown AH-252-XXX P40, P60, P80 Attachment Grip 8" Grip AH-570-XXX P40, P60, P80 2¾" x 10 yds. Grip mirka.com 9
Autonet® - AE Series NET ABRASIVES FEATURES AND BENEFITS: Excellent initial aggressivity Long life-span compared to paper-backed discs Eliminates clogging and pilling Developed specifically for the automotive repair industry Rolls have perforations every 23/4" making it simple to get the desired length Net abrasives are a key component for dust-free sanding T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminumn oxide AE-203-XXX P80, P120, P150, P180, P240, Bonding Resin over resin 3" Grip P320, P400, P600, P800 Backing Polyamide NET AE232050XX P80, P120, P150, P180, P240, Coating Closed 5" Grip P320, P400, P500, P600, P800 Color Gray AE241050XX P80, P120, P150, P180, P240, 6" Grip P320, P400, P500, P600, P800 Attachment Grip P80, P120, P150, P180, P240, AE-570-XXX P320, P400, P500, P600 2¾" x 11 yds. Grip Perforated every 2¾" Golden Finish FEATURES AND BENEFITS: Complete Post-Paint Finishing System Improved consistency and less re-work Less time required for the repair area Systematic approach with numeric codes Two step sanding system / Two step polishing system Standardized post-paint / polishing process Ideal for both small and large repairs AVAILABLE SIZES: PROCESS STEPS: Grip attachment OS-241-GF1 Step 1 Sanding 6" Grip (Film) Leveling surfaces OS-241-GF2 Step 2 Sanding 6" Grip (Foam) Conditioning scratches PC20-1L Polarshine® 20 Step 1 Polishing MPADLWY-6 6" Lambswool Pad FC5-1L Polarshine® VF5 Step 2 Polishing MPADBF-6W 6" Black Foam Pad M-9915G Finish / Clean surface Microfiber Cloth 10 mirka.com
OSP - Optimized Surface Preparation OSP FEATURES AND BENEFITS: Complete system for auto body repair applications Easy for all operators to use Combines three industry SOPs in one process Improved consistency and less re-work AVAILABLE SIZES: DESCRIPTION: Simple to standardize process across all facilities OS-203-001 Paint removal Less time required for the repair 3" Grip Body filler sanding Improved shop environment OS-241-001 Paint removal Less technician exposure to dust OSP 1 6" Grip Body filler sanding Reduced labor cost of clean-up and maintenance OS-150-001 Paint removal Rolls are perforated every 2¾" 2¾" x 7¾" Grip Body filler sanding OS-570-001 Paint removal 2¾" x 11 yds. Grip Body filler sanding OS-203-002 Body filler/glaze sanding 3" Grip OS-241-002 Body filler/glaze sanding 6" Grip OSP 2 OS-150-002 Body filler/glaze sanding 2¾" x 7¾" Grip OS-570-002 Body filler/glaze sanding 2¾" x 11 yds. Grip OS-203-003 Primer prep 3" Grip OS-241-003 Primer prep 6" Grip OSP 3 OS-150-003 Primer prep 2¾" x 7¾" Grip OS-570-003 Primer prep 2¾" x 11 yds. Grip T E C H N I C A L S P E C I F I C AT I O N S OS-127-004 Primer finishing Grain Blended 4½" x 5" Grip Bonding Resin OS-734-004 Primer finishing 3" 6-Hole Grip OSP 4 Backing Polyamide NET Coating Closed OS-241-004 Primer finishing Color Yellow 6" Grip Attachment Grip OS-711-004 Primer finishing 6" 15-Hole Grip Visit www.mirka.com/osp for more information Use with Mirka® Dry Guide Coat to Ensure the Perfect Finish! 9193500111 (Black) 9193600111 (White) Dry guide coat mirka.com 11
FOAM ABRASIVES Abralon® - 8A Series FEATURES AND BENEFITS: Combines benefits of abrasive cloth and non-woven products Constructed of fabric face, foam center and a grip backing Abrasive grains are bonded evenly to the fabric face Can be used for dry or wet sanding Open cell design holds large amounts of water or solvent for lubrication and cooling T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Silicon carbide 8A-600-XXX 360, 500, 1000, 2000, 4000 Bonding Special Resin 1¼" Grip Backing Knitted fabric on foam 8A-203-XXX 180, 360, 500, 1000, 2000, Coating Special Abralon® method 3" Grip 3000, 4000 Color Gray 8A-232-XXX 180, 360, 500, 600, 1000 5" Grip Attachment Grip 8A-241-XXX 180, 360, 500, 1000, 2000, 6" Grip 3000, 4000 8A-616-XXX 360, 500, 1000, 2000 COMMON APPLICATIONS FOR ABRALON® 9" Grip 8A-618-XXX Pre-polishing clearcoats (1000-4000) 180, 360, 500, 1000, 2000 12" Grip Surface finishing of aluminum or stainless steel XS-8A-129-XXX 180, 360, 500, 1000 Finishing of solid surface counter tops 3" x 4" * Sanding of sealers and primers (180-500) XS-8A-178-XXX 180, 360, 500, 1000 3" x 5" * Removing mold marks and flash from plastic parts Surface finishing of glass surfaces * 3" x 4" / 3" x 5" / 3.67" x 9" Custom order only. Minimum 2 week lead time. 12 mirka.com
Novastar™ - FG Series FILM ABRASIVES FEATURES AND BENEFITS: Aggressive initial cut in coarse grits for Heavy-Duty applications Long lasting disc life means excellent performance using fewer discs Consistent scratch pattern provides the desired finish Effective multi-hole pattern delivers outstanding performance without clogging Premium film backing offers outstanding edgewear resistance, flexibility and grain adhesion AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S FG-5MH-XXX 80, 120, 150, 180, Grain Ceramic / Aluminum oxide 5" Grip P240, P320,P400, P500, P600 Bonding Low VOC resin system FG-6MH-XXX 80, 120, 150, 180, Backing Polyester film 6" Grip P240, P320, P400, P500, P600 Coating Semi-open Color Transparent Attachment Grip Novastar™ - SR Series FEATURES AND BENEFITS: Made with a new manufacturing technology which enables a precise grain distribution and thus a consistent scratch pattern 3 micron 5 micron Easy to use, with minimal loading and pilling Durable, flexible and long-lasting discs gives an excellent surface finish, making the polishing faster and easier AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S FH-340-XXX Grain Aluminium oxide/Silicon carbide 1¼" PSA Finessing 3µ, 5µ Bonding Low VOC resin system Rolls Backing PET Film Coating Defined mono-layer coating technology Color Grey Grit Range 3 micron (eqv. to 5000) and 5 micron (eqv. to 3000) mirka.com 13
Novastar Flex - FX Series FILM ABRASIVES FEATURES AND BENEFITS: Ultra-flexible – No wrinkles, breakages or sharp edges Perfect balance in cutting & scratch pattern Tackles all kinds of shapes & complex contours Color coded grits and grip backing for easy use Center perforation for tearing in half Long life and superior finish Can be used with or without hand pad T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum Oxide FX-191-400 400 Bonding Blue, Green, Yellow, Orange, Peach Backing Polyurethane Film FX-191-600 600 Coating Resin Over Resin Color 400 (Blue), 600 (Green), FX-191-800 800 800 (Yellow), 1200 (Orange), 1500 (Peach) FX-191-1200 1200 Attachment Semi-Open FX-191-1500 1500 Microstar® - FM Series FEATURES AND BENEFITS: Ideal for removal of runs, dust nibs and excess orange peel from topcoat finishes before repainting or buffing Resists loading for longer disc life Ideal for sanding fresh or soft clearcoat Leaves an even scratch pattern, which buffs out quickly on all types of automotive paints Film-backed discs have full resin bonded aluminum oxide grain T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide FM-608-XXX P800, P1000, P1200, P1500, Bonding Low VOC resin system 3" Grip P2000 Backing Polyester film FM-612-XXX P800, P1000, P1200, P1500, Coating Semi-open 5" Grip P2000, P2500 Color White FM-622-XXX P800, P1000, P1200, P1500, Attachment Grip 6" Grip P2000, P2500 FM-611-XXX P800, P1000, P1200, P1500, 6" 15-Hole Grip P2000, P2500 14 mirka.com
Polarstar® - FA Series FILM ABRASIVES FEATURES AND BENEFITS: Outstanding performance on demanding applications such as hard tooling gelcoats and the latest scratch resistant automotive clearcoats Unique abrasive material resists clogging and delivers long lasting performance Excellent durability – retains its high performance sanding properties AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S Grain Aluminum oxide (P400–P600) FA-608-XXX P600, P800, P1000, P1200, / Silicon carbide (P800–P1500) 3" Grip P1500 Bonding Resin over resin FA61250XX P600, P800, P1000, P1200, 5" Grip P1500 Backing Polyester film Coating Semi-open FA622050XX P600, P800, P1000, P1200, 6" Grip P1500 Color Green/White Attachment Grip FA30100141 P400 13⁄8" PSA FA611050XX P600, P800, P1000, P1200, 6" 15-Hole Grip P1500 Polarstar® SR - SR Series FEATURES AND BENEFITS: Designed for spot repair of clearcoats Ideal for nib sanding to remove dirt or imperfections 3 micron 5 micron 7 micron Excellent durability Suitable for wet sanding AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S SR-301-3A 3A Grain Aluminum oxide 1¼" PSA 3 micron (comparable to P5000) Bonding Resin over resin SR-301-5A 5A Backing Polyester film 1¼" PSA 5 micron (comparable to P3000) Coating Semi-open SR-340-5A 5A Color Pale yellow (3A), Mint green (5A), 1¼" PSA 5 micron (comparable to P3000) Lilac (7A) SR-301-7A 7A Attachment Grip 1¼" PSA 7 micron (comparable to P2500) SR-340-7A 7A 1¼" PSA 7 micron (comparable to P2500) mirka.com 15
PA P E R A B R A S I V E S Iridium - 24 Series FEATURES AND BENEFITS: Fast sanding and consistent scratch pattern saves you time and money Consistent quality and non-stick coating repels dust an provides a long disc life Effective multihole pattern delivers outstanding performance without clogging Premium paper backing offers remarkable flexibility and grain adhesion AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S 24-314-XXX 80, 120, 150, 180, 220, 240, 5" PSA 320, 400, 600, 800, 1000 Grain Ceramic / Aluminum oxide 24-342-XXX 80, 120, 150, 180, 220, 240, Bonding Low VOC resin system 6" PSA 320, 400, 600, 800, 1000 Backing Latex C-paper 24-38P-XXX Coating Semi-open 60, 80, 120, 150, 180, 240, 320, 2¾" x 16" Perf Grip* 400 Color Gray *perforations every 8" Attachment Grip and PSA 24-570-XXX 80, 120, 150, 180, 240, 320, 2¾" x 33.5 yds. 400, 600 20-Hole Grip Perf-Roll AVAILABLE SIZES: AVAILABLE GRITS: 24-573-XXX 80, 120, 150, 180, 220, 320, 400 4½" x 10 yds. PSA Roll 24-3MH-XXX 80, 120, 150, 180, 220, 240, 3" Multi-Hole Grip 320, 400, 500, 600 24-574-XXX 80 2¾" x 20 yds. PSA Roll 40, 60, 80, 120, 150, 180, 220, 24-5MH-XXX 240, 320, 400, 500, 600, 800, 24-584-XXX 5" Multi-Hole Grip 120, 150, 180, 220, 320, 400 1000 2¾" x 40 yds. PSA Roll 40, 60, 80, 120, 150, 180, 220, 24-620-XXX 24-6MH-XXX 240, 320, 400, 500, 600, 800, 3.9" x 6" x 6" 80, 120, 180, 240 6" Multi-Hole Grip 1000 7-Hole Grip 24-35M-XXX 60, 80, 120, 150, 180, 240, 320, 24-8MH-XXX 80, 120, 150, 180, 220, 240, 3" x 5" 54-Hole Grip 400 8" Multi-Hole Grip 320, 400, 500, 600 16 mirka.com
Q.Silver® - 2B Series AVAILABLE SIZES: AVAILABLE GRITS: PA P E R A B R A S I V E S 2B-608-XXX P80, P120, P150, P180, P220, P320, 3" Grip P400 2B-634-XXX P80, P180, P320 3" 6-Hole Grip 2B-612-XXX P80, P120, P150, P180, P220, P240, 5" Grip P320, P400, P500 2B-332-XXX P80, P100, P120, P150, P180, P220, 5" PSA P240, P320, P400, P500 2B-614-XXX P80, P100, P120, P150, P180, P220, 5" 5-Hole Grip P320, P400 FEATURES AND BENEFITS: 2B-647-XXX P120, P150, P180, P220, P320, Excellent, uniform grain distribution provides an enhanced 5" 17-Hole Grip P400 surface with a more consistent scratch pattern 2B-342-XXX P80, P120, P150, P180, P220, P240, Semi-open coat design provides fast finishing 6" PSA Linkrol P320, P400, P500 Resin bonding provides superior grain support 2B-622-XXX P80, P120, P150, P180, P220, P240, Q.Silver® has a special self-sacrificing stearate coating to reduce 6" Grip P320, P400, P500 clogging and loading 2B-611-XXX P80, P100, P120, P150, P180, P220, 6" 15-Hole Grip P240, P320, P400, P500 T E C H N I C A L S P E C I F I C AT I O N S 2B-663-XXX P80, P180 Grain Aluminum oxide 2¾" x 16½" Grip Bonding Resin over resin 2B-574-XXX P80 2¾" x 20 yds. PSA Backing P80 - P320: D-paper P400 - P500: C-paper 2B-584-XXX P120, P150, P180, P220, P320, Coating Semi-open 2¾" x 40 yds. PSA P400 Color Blue Attachment Grip and PSA Q.Silver® Micro - 2C Series FEATURES AND BENEFITS: Excellent, uniform grain distribution provides an enhanced surface with a more consistent scratch pattern Outstanding performance on demanding applications such as hard tooling gelcoats and the latest scratch resistant automotive AVAILABLE SIZES: AVAILABLE GRITS: clearcoats Ideal for removal of runs, dust nibs and excess orange peel from 2C-608-XXX P600, P800, P1000, P1200, P1500 topcoat finishes before repainting or buffing 3" Grip Semi-open coat design provides fast finishing 2C-612-XXX P600, P800, P1000, P1200, P1500 5" Grip Q.Silver® has a special self-sacrificing stearate coating to reduce clogging and loading 2C-332-XXX P600 5" PSA 2C-622-XXX T E C H N I C A L S P E C I F I C AT I O N S P600, P800, P1000, P1200, P1500 6" Grip Grain Silicon carbide 2C-341-XXX P600, P800 Bonding Resin over resin 6" PSA Backing B-paper 2C-611-XXX P600, P800, P1000, P1200, P1500 Coating Semi-open 6" 15-Hole Grip Color Plum XS-2C-600 P600, P800, P1000, P1200, P1500 Attachment Grip and PSA 1¼" Grip mirka.com 17
Q. Silver® Ace - 2C Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Developed to achieve outstanding results on challenging surface conditioning and repair applications Well suited for metal applications Ceramic/ceramic coated grain AVAILABLE SIZES: AVAILABLE GRITS: Self-sacrificing stearate coating to reduce clogging and loading Semi-open coat design provides fast finishing 2C-612-XXX P80, P120, P150, P180, P220, 5" Grip P320, P400, P500 2C-647-XXX P80, P120, P180, P220, P320, T E C H N I C A L S P E C I F I C AT I O N S 5" 17-Hole Grip P400, P500 Grain Ceramic P80– P320 2C-688-XXX P80, P100, P120, P150, P180, Ceramic coated A/O P400–P500 3" x 5" 8-Hole Grip P240, P320 Bonding Resin over resin 2C-332-XXX P80, P120, P150, P180, P220 Backing Latex paper, D-paper/ C-paper 5" PSA Coating Semi-open 2C-622-XXX P80, P120, P180, P220 P320, Color Plum 6" Grip P400, P500 Attachment Grip and PSA 2C-611-XXX P80, P120, P150, P180, P220, 6" 15-Hole Grip P320, P400, P500 2C-674-XXX AVAILABLE SIZES: AVAILABLE GRITS: 2¾" x 5" Grip P80, P180, P320 XS-2C-600-XXX P80, P120, P150, P180, P220, 2C-635-XXX P80, P180, P320 1¼" Grip P320, P400, P500 2¾" x 7¾" 8-Hole Grip 2C-634-XXX P80, P120, P150, P180, P220, 2C-664-XXX 3" 6-Hole Grip P320, P400, P500 P80, P120, P180, P320 2¾" x 16½" 14-Hole Grip Gold ProFlex - 23 Series FEATURES AND BENEFITS: Designed for hand sanding applications Aluminum oxide grain provides a good cut and an excellent scratch pattern Flexible, latex-impregnated backing provides superior conformity in profile sanding Anti-slip coating on the back side provides a solid grip and feel during sanding T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide P80, P100, P120, P150, P180, 23-104-XXX Bonding Resin over resin P220, P240, P320, P400, P600, 9" x 11" Plain P800 Backing P80–P180 C-paper, P220–P800 B-paper Coating Semi-open Color Gold Attachment Plain 18 mirka.com
Goldflex-Soft - 23 Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Designed for hand sanding applications A-weight, latex impregnated paper backing with PE foam is highly flexible and ideal for profile sanding Produces a high quality finish Durable, aluminum oxide grain delivers a long lasting, smooth cut Bulk roll is perforated to allow easy sheet dispensing from box T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide 23-145-XXX P150, P180, P240, P320, P400, Bonding Resin over resin 4½" x 5" Plain P500, P600, P800, P1000 Backing A-weight latex paper, PE-foam Coating Semi-open Color Gold Attachment Plain Gold Soft - 23 Series FEATURES AND BENEFITS: Designed for final sanding of e-coats, primers, sealers and panel blends Durable, aluminum oxide grain delivers a long lasting, smooth cut A special stearate coating is used to resist clogging and loading 6" 15-hole discs can be used with or without vacuum T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide 23-645-XXX P320, P500, P800 Bonding Resin over resin 6" 15-Hole Grip Backing C-paper with PE-foam Coating Semi-open Color Gold Attachment Grip mirka.com 19
Gold - 23 Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Designed for both finishing and heavy stock removal Aluminum oxide grain delivers a fast, and long lasting cut High strength resin bonding provides superior grain support Special stearate coating is used to maximize resistance to clogging and loading AVAILABLE SIZES: AVAILABLE GRITS: Semi-open coat produces an even, consistent scratch pattern P36, P40, P60, P80, P100, P120, 23-622-XXX P150, P180, P220, P240, P280, 6" Grip P320, P400, P500, P600, P800 T E C H N I C A L S P E C I F I C AT I O N S 23-341-XXX P36, P40, P60, P600, P800 Grain Aluminum oxide 6" PSA Bonding Resin over resin, Progressice Bond® P80, P100, P120, P150, P180, 23-342-XXX Backing P80 - P150 D-weight latex paper, P220, P240, P280, P320, P400, 6" PSA Linkrol P180 - P800 C-weight latex paper P500 Coating Semi-open P80, P100, P120, P150, P180, 23-6MH-XXX Color Gold P240, P320, P400, P500, P600, 6" Multi-Hole Grip P800 Attachment Grip and PSA 23-379-XXX P80, P100, P120, P150, P180, 6" PSA Autobox P220, P320, P400 23-624-XXX P60, P80, P100, P120, P150, P180, AVAILABLE SIZES: AVAILABLE GRITS: 6" 6-Hole Grip P220, P240, P320 23-611-XXX P80, P100, P120, P150, P180, XS-23-600-XXX P80, P120, P150, P180, P220, 6" 15-Hole Grip P220, P320, P400, P600, P800 1¼" Grip P320, P400, P600, P800 P80, P100, P120, P150, P180, 23-631-XXX 23-608-XXX P36, P80, P180 P220, P240, P320, P400, P600, 8" Grip 3" Grip P800 23-352-XXX P36, P40, P80, P100, P120, P150, 23-634-XXX P220, P240, P320, P400, P600, 8" PSA P180, P220, P320, P400 3" 6-Hole Grip P800 23-632-XXX P180, P320 P36, P40, P60, P80, P100, P120, 8" 8-Hole Grip 23-612-XXX P150, P180, P220, P240, P320, 23-648-XXX P80, P100, P120, P150, P180, 5" Grip P400, P500, P600, P800 9" 27-Hole Grip P240 P36, P40, P60, P80, P100, P120, 23-332-XXX 23-688-XXX P80, P100, P120, P150, P180, P150, P180, P220, P240, P280, 5" PSA 3" x 5" 8-Hole Grip P220, P240, P320 P320, P400, P500, P600, P800 23-635-XXX P80, P100, P120, P150, P180, P80, P120, P150, P180, P220, 23-314-XXX 2¾" x 7¾" P220, P240, P320, P400, P500, P320, P400 5" PSA Linkrol 8-Hole Grip P600, P800 23-364-XXX 23-388-XXX P80, P100, P120, P150, P180, P36, P40, P60, P80, P120 2¾" x 16½" PSA 5" PSA Autobox P220, P240, P320, P400 P60, P80, P100, P120, P150, P180, 23-663-XXX 23-614-XXX P36, P40, P80, P320 P220, P280, P320, P400, P500, 2¾" x 16½" Grip 5" 5-Hole Grip P600, P800 23-170-XXX P36, P40, P60, P80, P100, P120, 23-321-XXX P60, P80, P100, P120, P150, P180, 2¾" x 17½" Plain P150, P180, P220 5" 5-Hole PSA P220, P240, P320, P400 23-574-XXX P60, P80, P100, P120, P150, P180, 2¾" x 20 yds. P80, P100 23-615-XXX PSA Autokut P220, P150, P180, P220, P240, 5" 8-Hole Grip P320, P400, P500, P600 23-584-XXX P120, P150, P180, P220, P240, 23-320-XXX 2¾" x 40 yds. P80, P120, P150, P220 P320, P400, P600 5" 8-Hole PSA PSA Autokut 23-573-XXX 23-647-XXX P80, P100, P120, P150, P180, P80, P100, P120, P150, P180, 4½" x 10 yds. 5" 17-Hole Grip P220, P320, P400, P600, P800 P220, P320, P400 PSA Autokut 20 mirka.com
COMING 2021 Gold Multi-Fit Paper and Film - 23 Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Designed for both finishing and heavy stock removal Aluminum oxide grain delivers a fast, and long lasting cut High strength resin bonding provides superior grain support Special stearate coating is used to maximize resistance to clogging and loading Semi-open coat produces an even, consistent scratch pattern T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide P40, P60, P100, P120, P150, Bonding Paper: Resin over resin (P80-P800) 23-5MF-XXX P220, P240, P320, P400, P500, 5" Multi-Fit Grip P600, P600, P800, P1000, Polyester Film: Progressive Bond® (P800-P1500) P1200, P1500 Backing P80-P150: D-Weight latex paper, P180-P800: C-Weight latex Paper, 23-5MFF-XXX P600, P800, P1000, P1200, P800-P1500: polyester Film 5" Multi-Fit Grip Film P1500, P2000 Coating Semi-open P40, P60, P80, P100, P120, Color P40-P800: Gold (Paper); 23-6MF-XXX P150, P180, P220, P240, P320, P800-P1500: White (Film) 6" Multi-Fit Grip P400, P600, P800 Attachment Grip 23-6MFF-XXX P600, P800, P1000, P1200, 6p" Multi-Fit Grip Film P1500, P2000 Gold Film - 23 Series FEATURES AND BENEFITS: Designed for fine finishing Aluminum oxide grain delivers a fast and long lasting cut High strength resin bonding provides superior grain support Special stearate coating is used to maximize resistance to loading Semi-open coat produces an even, consistent scratch pattern T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide 23-5NHF-XXX P800, P1000, P1200, 1P500 Bonding Polyester Film: Progressive Bond® 5" No-Hole Film Backing Polyester Film 23-6NHF-XXX P800, P1000, P1200, P1500 6" No-Hole Film Coating Semi-open Color White Attachment Grip mirka.com 21
Basecut - 22 Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Economical option Aggressive initial cut Resists clogging and loading T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide P40, P80, P100, P120, P150, P180, 22-622-XXX Bonding Resin over resin P220, P320, P400, P500, P600, P800, 6" Grip P1000, P1200, P1500 Backing P40-P80 D-paper, P100-P800 C-paper, P1000-P1500 B-paper 22-341-XXX P40 6" PSA Coating Semi-open Color Blue 22-342-XXX P80, P100, P120, P150, P180, P220, 6" PSA Linkrol P240, P320, P400, P500 Attachment Grip, PSA and Plain 22-352-XXX P40, P80 8" PSA 22-364-XXX P40, P80 2¾" x 16½" PSA AVAILABLE SIZES: AVAILABLE GRITS: 22-101-XXX P40, P60, P80, P100, P120, P150, 22-612-XXX P40, P80, P100, P120, P150, P180, 9" x 11" Plain P180, P220, P320, P400 5" Grip P220, P320, P400, P500, P600 22-580-XXX 22-314-XXX P80, P100, P120, P150, P180, P220, P80, P120, P150, P180, P220, P320, 2¾" x 25 yds. 5" PSA Linkrol P240, P320, P400, P500 P400 PSA Autokut Caratflex - 02 Series FEATURES AND BENEFITS: Designed for hand sanding of wood, sealers, paint and lacquers The latex impregnated paper backing is highly flexible and ideal for profile sanding An advanced stearate coating is used to resist loading AVAILABLE SIZES: AVAILABLE GRITS: Resin bonding improves grain adherence and product life 02-612-XXX Silicon carbide grain delivers an exceptionally sharp, smooth cut P180, P220 P320 5" Grip 02-314-XXX P100, P120, P150, P180, P320 5" PSA Linkrol T E C H N I C A L S P E C I F I C AT I O N S 02-101-XXX P80, P100, P120, P150, P180, Grain Silicon carbide 9" x 11" Plain P220, P240, P280, P320, P400 Bonding Resin over resin, Progressive Bond® 02-560-XXX P120, P150, P180, P220, P320 Backing P80 - P320 B-paper, P400 A-paper 2½" PSA* Coating Semi-open 02-570-XXX P120, P150, P180, P220, P320 3¼" PSA* Color Gray Attachment Grip, PSA and Plain * Special order ONLY. Lengths vary from 70" for P120 to 125" for P320 22 mirka.com
Coarse Cut - 40 Series PA P E R A B R A S I V E S FEATURES AND BENEFITS: Aggressive and fast cutting in coarse grades and is long lasting Specially reinforced paper exclusive to Mirka provides superior grain support Semi-open coat produces a consistent scratch pattern, while resisting loading AVAILABLE SIZES: AVAILABLE GRITS: 40-622-XXX P36, P40, P60, P80, P120 6" Grip T E C H N I C A L S P E C I F I C AT I O N S 40-341-XXX Grain Aluminum oxide P36, P40, P60, P80, P120 6" PSA Bonding Resin over resin, Progressive Bond® 40-624-XXX Backing Specially reinforced F-paper P36, P40, P60, P80 6" 6-Hole Grip Coating Semi-open 40-631-XXX Color P36, P40, P60, P80 Maroon 8" Grip Attachment Grip and PSA 40-352-XXX P36, P40, P60, P80, P100, 8" PSA P120 40-632-XXX AVAILABLE SIZES: AVAILABLE GRITS: 8" 8-Hole Grip P40, P80, P150 40-608-XXX 40-663-XXX P40, P80 P36, P40, P80 3" Grip 2¾" x 16½" Grip 40-612-XXX P36, P40, P60, P80, P100, 40-664-XXX 5" Grip P120 P40 2¾" x 16½" 14-Hole Grip 40-332-XXX 40-364-XXX P36, P40, P60, P80, P100 P36, P40, P60, P80 5" PSA 2¾" x 16½" PSA 40-614-XXX XS-40-698-XXX P40, P60, P80, P120, P150 P40, P80 5" 5-Hole Grip 2¾" x 16½" 18-Hole Grip Waterproof - 21 Series FEATURES AND BENEFITS: Waterproof paper offers full resin bonding on quality latex coated paper Ideal for nib sanding - to remove dirt and imperfections from paint surfaces Consistent and precise manufacturing process provides AVAILABLE SIZES: AVAILABLE GRITS: fine scratch pattern for improved finish 21-300-XXX 1¼" PSA P2500, P3000 T E C H N I C A L S P E C I F I C AT I O N S 21-800-XXX 13⁄8"PSA P1500, P2000 Grain Aluminum oxide P80–P360, Silicon carbide P400–P3000 21-118-XXX P1000, P1200, P1500, P2000, Bonding Resin over resin 5½" x 9" Plain P2500 Backing P80–P120 C-paper, P150–2500 B-paper 21-104-XXX P80, P100, P120, P150, P180, Coating Semi-open 9" x 11" Plain P220, P240, P320, P360, P400, Color Black P500, P600, P800, P1000, Attachment PSA and Plain P1200, P1500, P2000, P2500 mirka.com 23
Abrasive Sponges T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES AVAILABLE GRITS DESCRIPTION Grain Aluminum oxide 1351-XXX 100, 150, 180, 220, Double-sided Bonding Resin 3¾" x 4¾" x ½" 100B, 150B, 180B, 220B abrasive sponge Backing Foam 1353 -XXX 60, 100, 150, 180, 220, Four-sided Coating Closed 2¾" x 4" x 1" 100B, 150B, 220B abrasive sponge 60, 100, 120, 150, 180, 1355-XXX Single-sided 220, 60B, 100B, 120B, 4½" x 5½" x ¼" abrasive sponge 150B, 180B, 220B Hiolit XO - 51 Series / JF (56) Series FEATURES AND BENEFITS: The rigid cotton cloth is highly tear resistant Removes stock quickly, while producing a high-quality surface finish The durable aluminum oxide grain delivers an exceptionally long lasting cut T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide 56-332-XXX P60, P80, P100, P120, P150, Bonding Resin over resin 5" PSA P180, P220, P240, P320, P400 Backing X-weight cotton cloth (51) 51-332-XXX P40, P50, P60 J-weight cotton cloth (56) 5" Heavy-Duty PSA Coating Closed Color Maroon Attachment PSA 24 mirka.com
Hiolit XO - 57 Series B E LT S FEATURES AND BENEFITS: Designed for sanding operations where large amounts of material need to be removed Suitable for aggressive sanding Produces high quality results on challenging materials AVAILABLE SIZES: AVAILABLE GRITS: 57-2.5-14-XXXT T E C H N I C A L S P E C I F I C AT I O N S Custom Order P80, P100, P180 Portable belts 2.5" x 14" Grain Aluminum oxide 57-3-21-XXXT P50, P60, P80, P100, Bonding Resin over resin Portable belts 3" x 21" P120, P150 Backing Polyester cloth: P36-P80 X-weight cotton cloth P100 - P220 57-3-24-XXXT P50, P60, P80, P100, Portable belts 3" x 24" P120, P150 Coating Semi-open Color Maroon 57-4-24-XXXT P40, P50, P60, P80, Portable belts 4" x 24" P100, P120, P150 W: 0.5" - 12" L: up to 300" Custom Order Narrow belts P36-P220 57-Width-Length-Grit (width and length specified in inches) W: 13" - 56" L: up to 300" Custom Order P36-P220 Wide belts 57-Width-Length-Grit (width and length specified in inches) Hiolit JF - 55 Series FEATURES AND BENEFITS: Flexible properties and high quality sanding results make it ideal for metal and wood workshops Durability and excellent edge wear resistance make it ideal for sanding profiles and seams Ideal for aggressive sanding where flexibility is needed AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S Grain Aluminum oxide W: 0.5" - 12" L: up to 300" Bonding Resin over resin Custom Order Narrow belts P80-P220 55-Width-Length-Grit Backing J-weight cotton cloth (width and length specified in inches) Coating Semi-open Color Maroon W: 7", 8" , 9" L: 10.5" - 26.3" Custom Order P80-P220 Pump sleeves 55-Width-Length-Grit (width and length specified in inches) mirka.com 25
B E LT S Abranet Max - AB Series FEATURES AND BENEFITS: Tough aluminum oxide grain gives a high cut rate on harder wood types and materials Extremely long lifetime compared to conventional abrasive belts The symmetric net structure enables an efficient cut and stock removal Resists clogging on resinous wood types or soft materials Keeps sanded surface cooler to avoid burning Lower pressure required when sanding due to its net structure AVAILABLE SIZES: AVAILABLE GRITS: AB-2.5-14-XXXT P80, P100, P120, T E C H N I C A L S P E C I F I C AT I O N S Portable belts 2.5" x 14" P150, P180 Grain Aluminum oxide AB-3-18-XXXT P80, P100, P120, Portable belts 3" x 18" P150, P180 Bonding Resin over resin Backing NET AB-3-21-XXXT P80, P100, P120, Portable belts 3" x 21" P150, P180 Coating Closed AB-3-24-XXXT P80, P100, P120, Color Brown Portable belts 3" x 24" P150, P180 AB-4-24-XXXT P80, P100, P120, Portable belts 4" x 24" P150, P180 W: 2" - 11.8" L: 12" -100" Custom Order P80-P180 Narrow belts AB-Width-Length-Grit (width and length specified in inches) 26 mirka.com
Jepuflex Antistatic - 44 Series B E LT S FEATURES AND BENEFITS: Designed for sanding of hardwood such as oak and beechwood The closed coat gives the product high performance and long life Resistant to high temperatures and humidity Effective stock removal T E C H N I C A L S P E C I F I C AT I O N S AVAILABLE SIZES: AVAILABLE GRITS: Grain Aluminum oxide Bonding Resin over resin W: 13" - 56" L: 48" - 120" Backing Antistatic F-weight paper Custom Order P80-P220 Coating Closed 44-Width-Length-Grit Wide belts (width and lengths pecified in inches) Color Maroon Sica - 04 Series FEATURES AND BENEFITS: The antistatic treatment reduces dust loading and gives the product a longer life Fine scratch pattern produces a good final result after surface treatment Designed for sanding of hardwood and MDF Well suited to use after Jepuflex to achieve a better finish AVAILABLE SIZES: AVAILABLE GRITS: T E C H N I C A L S P E C I F I C AT I O N S W: 13" - 56" L: 48" - 120" Custom Order P80-P220 Grain Silicon carbide 04-Width-Length-Grit Wide belts (width and length specified in inches) Bonding Resin over resin Backing Antistatic F-weight paper Coating Closed Color Black mirka.com 27
NON-WOVEN ABRASIVES Mirlon® Total - 18 Series FEATURES AND BENEFITS: Open design is thinner and more flexible than traditional non-woven pads Three-dimensional structure made with cut fiber strands coated with resin and abrasive Consistent coating of aluminum oxide (VF 360) and silicon carbide ( XF 800, UF 1500, MF 2500) abrasive grains provide uniform, dense scratch pattern Very flexible, ideal for use on contoured surfaces AVAILABLE SIZES: AVAILABLE GRITS: 18-118-447 T E C H N I C A L S P E C I F I C AT I O N S VF (360) Red 4½" x 9" Grain Aluminum oxide (VF), 18-118-446 XF (800) Black Silicon carbide (XF,UF, MF) 4½" x 9" Bonding Resin 18-118-448 UF (1500) Gray Backing Non-Woven 4½" x 9" Coating Three dimensional Total Coating 18-118-449 MF (2500) Gold Color Red (VF), Black (XF), Gray (UF), Gold (MF) 4½" x 9" 18-241-XXX VF (360) Red, XF (800) Black 6" 18-573-373 VF (360) Red 4½" x 33' 18-573-943 UF (1500) Gray 4½" x 11yds. Mirlon® - 18 Series FEATURES AND BENEFITS: Three-dimensional structure made with cut fiber strands coated with resin and abrasive Consistent coating of aluminum oxide (VF) and silicon carbide (UF) abrasive grains provide more uniform scratch pattern Very flexible, ideal for use on contoured surfaces AVAILABLE SIZES: AVAILABLE GRITS: 18-241-447 VF (360) Maroon 6" Disc T E C H N I C A L S P E C I F I C AT I O N S 18-241-448 Grain Aluminum oxide (VF), UF (1500) Gray 6" Disc Silicon carbide (UF) 18-111-447 Bonding Resin VF (360) Maroon 6"x 9" Pad Backing Non-Woven 18-111-448 Coating Three dimensional UF (1500) Gray 6"x 9" Pad Color Maroon (VF), Gray (UF) 18-573-447 VF (360) Maroon 4" x 11 yds. Roll 18-573-448 UF (1500) Gray 4" x 11 yds. Roll 28 mirka.com
You can also read