HOSPITAL DOORS - PUBBLICAZIONE - OTTOBRE 2020 - Sesamo Srl
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PUBBLICAZIONE - OTTOBRE 2020
HOSPITAL DOORS
SESAMO was born in 1965 in Casale company, technological and product reality Monferrato (AL) with the intention of over the next fifty years. producing automatisms for doors and windows. Since seventies discovers his Innovation and creativity move it quickly calling for automations for sliding doors: one beyond its natural borders giving it an connotation that will give it a precise international dimension.
SESAMO
A STORY OF QUALITY
In 1996 SESAMO obtained the Even in the pharmaceutical environment,
certification of the quality assurance thanks to sealing characteristics, hermetic
system company according to the doors guarantee the maintenance of
standard ISO 9001 / UNI EN 29001: not different pressures, temperatures and
a goal but a noise. Sesamo doors guarantee to patients
starting point for project, production and and hospital staff an access in all safety,
testing of its products. comfort and hygiene.
In 2002 SESAMO gets, among the first Safety: our doors have the possibility to
companies in Italy, compliance with the be integrated with access control devices;
new regulations of UNI EN ISO 9001: 2000 all accessories satisfy the most demanding
quality as confirmation of the company's quality standards and comply with
deep passion for providing high quality international regulations.
products and services.
Comfort: our doors can be customized
Sesamo produces, installs and executes to satisfy different type of configuration,
the production of doors for the sector thanks to the wide range of surface
healthcare and pharmaceuticals where finishing materials and different options
acoustic, hygienic and thermal isolation for opening, in manual or automatic mode.
are requirements fundamental.
Hygiene: fundamental aspect and priority.
A sealed hermetic or airtight door is used The surfaces, whether they are in HPL
to isolate the different environments, plastic laminate or stainless steel, as
whether they are operating rooms, well like the perimetral profiles, they
laboratories, cleanrooms, recovery were carefully designed to prevent that
rooms, X-ray room or emergency care impurities can creep into corners and
units. joints.
EXPERIENCE
For over 50 years Sesamo has been designing and
building automatic entrances offering technological
and innovative products
QUALITY
We use materials and production processes that
guarantee a reliable product over time
FUNCTIONALITY
Our doors offer performance with low consumption
of energy, silent and smooth movements
Manual and automatic doors both swing and sliding,
hermetically sealed or simple airtight. Our doors
comply to international standards
pag. 6 pag. 10 pag. 14
ERMETIKA STS 40 STB
Hermetic sliding doors Airtight sliding doors Hospital swing doors
pag. 20 pag. 22 pag. 23
FINISHES WALL FRAMES ACCESSORIES
- PANEL - single corner - handles
- high-pressure - double - protection bands
laminate - telescopic - locks
- antibacterial - with lead - windows
- stainless steel - stainless steel
- glass
- PROFILES
- anodized
- painted
5
Hermetic sliding doors
DESCRIPTION
The Ermetika sliding door is available in both manual and automatic version.
The door has a perimeter frame with silver anodized aluminum profiles, 60 mm
coplanar panel thickness, external finish in HPL or stainless steel. The silicone gaskets
are mounted on all 4 sides of the door.
The innovative sliding guide of the automation allows you to manage the carriage
descent and translation of 12 mm to obtain levels of air permeability according to
the UNI standard EN 1026: 2016 in depression, up to class 4 according to the UNI EN
12207: 2017 standard.
Istituto Giordano S.p.A.
Via Rossini, 2 - 47814 Bellaria-Igea Marina (RN) - Italia
Tel. +39 0541 343030 - Fax +39 Via 0541 345540 Istituto Giordan
Rossini, 2 - 47814 Bellaria-Ig o S.p.A.
Tel. +39 0541 343030 ea Marina (RN) - Italia
istitutogiordano@giordano.it - www.giordano.it
PEC: ist-giordano@legalmail.it - Fax +39 0541
istitutogiordano@g 345540
Cod. Fisc./Part. IVA: 00 549 540 409 - Cap. Soc. € 1.500.000 i.v. iordano.it - www.gio
rdano.it
R.E.A. c/oCod.
C.C.I.A.A. (RN)IVA:
Fisc./Part. 156766 PEC: ist-giordano@legal
00 549 mail.it
Registro Imprese di Rimini n. 00 549 540 409 540 409 - Cap. Soc. € 1.500.000
R.E.A. c/o C.C.I.A.A i.v.
Registro Imprese . (RN) 156766
di Rimini n. 00 549
540 409
CERTIFICATIONS
TEST
TEST REPORT No. REPORT No. 3412
341289 89
Place and date
of issue: Bellar
ia-Igea Marina
Place and date of issue:
Custo Bellaria-Igea Marina - Italy, 12/04/2017 - Italy, 12/04/2017
mer: SESAMO
S.r.l. - Strad Gaban
The Ermetika sliding door has been tested at the laboratory
Customer: SESAMODate S.r.l. - Strada Gabannone, 8/10 - a15030 none, 8/10 (AL)
TERRUGGIA - Italy
- 15030 TERRUGGIA (AL)
test requested:
21/03/2017 - Italy
Date test requested:Order21/03/2017
number and date:
72654, 22/03/2017
Order number and Date date: 72654, 22/03/2017
sample received:
Giordano Institute according to the European standard UNI
30/03/2017
Date sample received: 30/03/2017
Test date: 31/03/2017
Test date: 31/03/2017Purpose of test:
air permeability
Purpose of test: air permeability ofand a sliding door inofaccordance
a sliding door
withinstandard
accordance UNI EN 1026:2016
EN 1026: 2016 and according to the American standard UL
classification with standard
and
Testclassification accordance withinstandard
site: IstitutoinGiord
accordance
UNIwith
EN 12207:2017
standard UNI EN
UNI EN 1026:2016
ano S.p.A. - Via 12207:2017
Test site: IstitutoSamp
Giordano S.p.A. - Via Erbosa, 72 - 47043 Erbos a, 72
Gatteo (FC) - ItalyGatte
- 47043
le origin: samp o (FC) - Italy
led and supplied
Sample origin: sampled and supplied by the Customer by the Customer
1784: 2015, obtaining results above market values for these
Identification
of sample receiv
ed:
Identification of sample received: No. 2017/0716 No. 2017/0716
range of products. These standards define the method
Sample name*
Sample name*
The test sampl
e is called “ERME
TIKA”.
The test sample is called “ERMETIKA”.
of test to determine the air permeability of doors and
windows.
(*) according to
that stated by
the Customer.
(*) according to that stated by the Customer.
Comp. AV
Revis. PB This document This test
is the English
This test report consists of 17report consists of 17
sheets.
Comp. AV translation of the test report sheets. Sheet
This document is the English translation of the
thetest report No. 341289 issued
only valid No. 341289 dated 12/04/2017
version
in Italian; in case of dispute
dated 12/04/201
Revis. PB CLAUSES: This
document
the only validonly
is the
version is the Italian one. Date ofItalian one. Date
translation: 27/04/2017.
7 issued in Italian;
in case of dispute1 of 17
relates to the sample of translation:
27/04/2017. Sheet
or material tested
and shallexcept
not be in
CLAUSES: This document relates only to the sample or material tested and shall not be reproduced full without Istituto Giordano’s written approval.
reproduced except in full without 1 of 17
Istituto Giordano’s
written approval.
6
ERMETIKA
MODELS
Automatic with KIT Ermetika Manual
Partial opening Partial opening
Full opening Full opening
DOOR PANEL COVER
Thickness60 mm Cover anodized aluminum free of sharp edges or
MDF support thickness 4mm fire retardant Scotch Brite stainless steel AISI 304 10/10
Perimeter strip in MDF fire retardant to ensure
adequate support also for doors with lead FLOOR GUIDES
shielding Double steel floor guide with
Internal core in polystyrene self-extinguishing insert in low-friction material
class "E"
External finish in HPL 0.9mm thickness, also WALL FRAME
available with antibacterial treatment, or Scotch- Perimeter wall frame in aluminum anodized or
Brite AISI stainless steel 304 10/10 Available in painted, available in versions with a simple "L"
the version with lead shield, thickness 1-2-3 mm shaped , double “L” for 100 mm wall thickness,
double "L" and insert in HPL or steel laminate
FRAME PROFILES
Aluminum profiles with chemical anodization ACCESSORIES
sandblasted to make it perfectly homogeneous ▪ handles
and thickness of 2 mm to ensure strenght and ▪ protective bands
hermetic seal, even in the presence of heavy ▪ windows
doors and high pressures. Available in RAL finish
INSTALLATION REQUIREMENTS
GASKETS The vertical sides and the top horizontal side must
Extruded 60sh/a silicone gaskets on 4 sides. be leveled with maximum error of +/- 5 mm. The
The silicone guarantees high durability and application surface of the door, both the beam
stability over time. The absence to release and the frame must be planar and straight.
particles of material makes it the most suitable The area of application of the operator's beam
solution for healthcare, pharmaceuticals and must be rigid and strong, it must allow fixing by
food environments means of dowels, along the size of the entire
beam itself.
TRACK PROFILE An applied load of 220Kg must be considered.
Extruded aluminum with increased section,
replaceable sliding guide
7
Hermetic sliding doors
143
SEZ. VERTICALE INTERNO SEZ. VERTICALE INTERNO
265
330
345
81
12
92
SH=50
HSC=HC+265
CODICE DESCRIZIONE FORMULE NOTE
LUP LARGHEZZA UTILE PASSAGGIO L-24 SP=60
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
LA LARGHEZZA ANTA LUP+100
HC=HUP+92
HA=HUP+40
HI=HUP+60
HA ALTEZZA ANTA HUP+40
HUP=H-12
LI LARGHEZZA IMBOTTE LUP+120
H
HI ALTEZZA IMBOTTE HUP+60 ANTA CHIUSA ANTA APERTA
HC ALTEZZA SOTTO CASSA HUP+92
HSC ALTEZZA SOPRA CASSA HC+265
1000
T TRAVERSO AUTOMAZIONE (QMC+QMT+(LAx2))-50
L
12 LUP=L-24 12 +12
SEZ. ORIZZONTALE
+12
12
22
10
QMT=53 (std)
PIOMBATURA NODO VERTICALE PIOMBATURA NODO ORIZZONTALE
ANTA CHIUSA
INTERNO
ST=50 SC=50
LA=LUP+100 LASTRA IN PIOMBO
LI=LUP+120
SEZ. ORIZZONTALE
24
LASTRA IN PIOMBO
59
60
ANTA APERTA
INTERNO
130
QMC=53 (std) SCHEMA DI PIOMBATURA IN CASO DI ANTA PIOMBATA SCALA 2:1
T = (QMC+QMT+(Ax2))-50 1 ANTA APRE A DESTRA
APERTUTA TOTALE
143
SEZ. VERTICALE INTERNO SEZ. VERTICALE INTERNO
265
330
345
81
12
92
SH=50
CODICE DESCRIZIONE FORMULE NOTE
HSC=HC+265
LII LARGHEZZA INTERNA IBOTTE L-24
SP=60
LUP LARGHEZZA UTILE PASSAGGIO LII-150
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
HC=HUP+92
LA LARGHEZZA ANTA LUP+100
HA=HUP+40
HI=HUP+60
HA ALTEZZA ANTA HUP+40
HUP=H-12
LI LARGHEZZA IMBOTTE LUP+120
H
ANTA APERTA
HI ALTEZZA IMBOTTE HUP+60
HC ALTEZZA SOTTO CASSA HUP+92
1000
HSC ALTEZZA SOPRA CASSA HC+265
T TRAVERSO AUTOMAZIONE (QMC+QMT+(LAx2))-200
L
12 LII=L-24 12 +12
SEZ. ORIZZONTALE +12
22
10
QMT=53 (std) PIOMBATURA NODO VERTICALE PIOMBATURA NODO ORIZZONTALE
12
ANTA CHIUSA
INTERNO
ST=50 SC=50 LASTRA IN PIOMBO
LA=LII+100
LI=LII+120
LUP=LII-150 150 SEZ. ORIZZONTALE
LASTRA IN PIOMBO
24
59
60
ANTA APERTA
INTERNO
SCHEMA DI PIOMBATURA IN CASO DI ANTA PIOMBATA
QMC=53 (std) 1 ANTA APRE A DESTRA
T = (QMC+QMT+(Ax2))-200 APERTUTA PARZIALE
8
ERMETIKA
143
SEZ. VERTICALE INTERNO SEZ. VERTICALE INTERNO
265
330
345
81
12
92
SH=50
HSC=HC+265
CODICE DESCRIZIONE FORMULE NOTE
LUP LARGHEZZA UTILE PASSAGGIO L-24 SP=60
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
LA LARGHEZZA ANTA LUP+100
HC=HUP+92
HA=HUP+40
HI=HUP+60
HA ALTEZZA ANTA HUP+40
HUP=H-12
LI LARGHEZZA IMBOTTE LUP+120
H
HI ALTEZZA IMBOTTE HUP+60 ANTA APERTA
HC ALTEZZA SOTTO CASSA HUP+92
HSC ALTEZZA SOPRA CASSA HC+265
1000
T TRAVERSO AUTOMAZIONE (QMC+QMT+(LAx2))-50
L
12 LUP=L-24 12 +12
+12
12
22
10
QMT=53 (std)
PIOMBATURA NODO VERTICALE PIOMBATURA NODO ORIZZONTALE
ANTA CHIUSA
SC=50 ST=50
LA=LUP+100 LASTRA IN PIOMBO
LI=LUP+120
24
LASTRA IN PIOMBO
59
60
ANTA APERTA
130
QMC=53 (std) SCHEMA DI PIOMBATURA IN CASO DI ANTA PIOMBATA
T = (QMC+QMT+(Ax2))-50 1 ANTA APRE A SINISTRA
APERTUTA TOTALE
143
SEZ. VERTICALE INTERNO SEZ. VERTICALE INTERNO
265
330
345
81
12
92
SH=50
CODICE DESCRIZIONE FORMULE NOTE
HSC=HC+265
LII LARGHEZZA INTERNA IBOTTE L-24
SP=60
LUP LARGHEZZA UTILE PASSAGGIO LII-150
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
HC=HUP+92
LA LARGHEZZA ANTA LUP+100
HA=HUP+40
HI=HUP+60
HA ALTEZZA ANTA HUP+40
HUP=H-12
LI LARGHEZZA IMBOTTE LUP+120
H
ANTA APERTA
HI ALTEZZA IMBOTTE HUP+60
HC ALTEZZA SOTTO CASSA HUP+92
1000
HSC ALTEZZA SOPRA CASSA HC+265
T TRAVERSO AUTOMAZIONE (QMC+QMT+(LAx2))-200
L
12 LII=L-24 12 +12
SEZ. ORIZZONTALE +12
22
10
QMT=53 (std) PIOMBATURA NODO VERTICALE PIOMBATURA NODO ORIZZONTALE
12
ANTA CHIUSA
INTERNO
SC=50 ST=50 LASTRA IN PIOMBO
LA=LII+100
LI=LII+120
SEZ. ORIZZONTALE
150 LUP=LII-150
LASTRA IN PIOMBO
24
59
60
ANTA APERTA
INTERNO
SCHEMA DI PIOMBATURA IN CASO DI ANTA PIOMBATA
QMC=53 (std) 1 ANTA APRE A SINISTRA
T = (QMC+QMT+(Ax2))-200 APERTUTA PARZIALE
9
Airtight sliding doors
DESCRIPTION
STS 40 single or double airtight sliding door are available in both manual both automatic,
The door has a perimeter frame with profiles in silver anodized aluminum, finished
panel 40 mm, external finishing in HPL or stainless steel. The airtight effect is guaranteed
through the use of aluminum labyrinth profiles and brushes or gaskets.
MODELS
Automatic with Dualcore automation KIT Manual
Partial opening Partial opening
Full opening Full opening
LUP
1 sliding wing
A
LUP
2 sliding wings
A A
LUP
2 telescopic wings
A A
X
LUP
10
ASTS 40
DOOR PANEL
Thickness 40 mm
Support in MDF 4 mm fire retardant
MDF perimeter strip to ensure adequate support even in case of doors with lead shielding
Internal core in self-extinguishing polystyrene
External finish in HPL 0.9 mm, optional antibacterial treatment, or Scotch-Brite AISI 304 10/10 stainless
steel
Available in the version with lead shield, thickness 1-2-3 mm
PROFILES
Aluminum profiles with increased section with anodizing or painting treatment
TRACK PROFILE
Extruded aluminum anodized, replaceable sliding guide
COVER
Extruded aluminium profile with flat surface or standard with rips
FLOOR GUIDE
Single floor guide with insert in low-friction material
WALL FRAME
Perimeter wall frame in aluminum anodized or painted, available in versions with a simple "L" shaped,
double “L” for 100 mm wall thickness, double "L" and insert in HPL or steel laminate
ACCESSORIES
▪ handles
▪ protective bands
▪ windows
INSTALLATION REQUIREMENTS
The vertical sides and the top horizontal side must be leveled with maximum error of +/- 5 mm. The
application surface of the door, both the beam and the frame must be planar and straight.
The area of application of the operator's beam must be rigid and strong, it must allow fixing by means
of dowels, along the size of the entire beam itself.
An applied load of 300Kg must be considered.
11Airtight sliding doors
SEZ. VERTICALE INTERNO
CODICE DESCRIZIONE FORMULE
LUP LARGHEZZA UTILE PASSAGGIO L-24
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
LA LARGHEZZA ANTA LUP+58
165
HA ALTEZZA ANTA HUP+65
Dualco re LH10 0-140
136
LI LARGHEZZA IMBOTTE LUP+120
12
90
HI ALTEZZA IMBOTTE HUP+60
HC ALTEZZA SOTTO CASSA HUP+102
HSC ALTEZZA SOPRA CASSA HUP+177
T TRAVERSO AUTOMAZIONE LUPX2+120
40
L
LUP=L-24
HA
12 12
HUP=H-12
SEZ. ORIZZONTALE
H
1000
ANTA CHIUSA
INTERNO
SC=50
LA=LUP+58
LI=LUP+120
12
LUP=L-24
SEZ. ORIZZONTALE
19
1 ANTA SCORREVOLE INTERNO
CON CORNICE SEMPLICE T
SEZ. VERTICALE INTERNO
CODICE DESCRIZIONE FORMULE
LUP LARGHEZZA UTILE PASSAGGIO L-24
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-12
LA LARGHEZZA ANTA (LUP+100) X 2
165
HA ALTEZZA ANTA HUP+65
Dualco re LH10 0-140
136
LI LARGHEZZA IMBOTTE LUP+120
12
90
HI ALTEZZA IMBOTTE HUP+60
HC ALTEZZA SOTTO CASSA HUP+102
HSC ALTEZZA SOPRA CASSA HUP+177
T TRAVERSO AUTOMAZIONE LUPX2+140
40
L
HA
12 12
HUP=H-12
SEZ. ORIZZONTALE
H
49,77
1000
LI=LUP+120 SC=50 INTERNO
LUP=L-24
SEZ. ORIZZONTALE
12
31,08
LA LA
INTERNO
T
2 ANTE SCORREVOLI
CON CORNICE SEMPLICE
12STS 40
SEZ. VERTICALE INTERNO
CODICE DESCRIZIONE FORMULE
LUP LARGHEZZA UTILE PASSAGGIO L-100
CONFIGURATORE INGRESSO
HUP ALTEZZA UTILE PASSAGGIO H-50
LA LARGHEZZA ANTA LUP+110
HA ALTEZZA ANTA HUP+85
117
Dualco re LH10 0-140
196
LI LARGHEZZA IMBOTTE
70
LUP+174
HI ALTEZZA IMBOTTE HUP+87
HC ALTEZZA SOTTO CASSA HUP+120
HSC ALTEZZA SOPRA CASSA HUP+196
T TRAVERSO AUTOMAZIONE LUPX2+210
40
87 L
LUP=L-100
HA
HUP=H-50
SEZ. ORIZZONTALE
H
240,71
1000
350,01
ANTA CHIUSA
SC=80
INTERNO
LI=LUP+174
12
LUP=L-100 SEZ. ORIZZONTALE
240,71
ANTA CHIUSA
INTERNO
1 ANTA SCORREVOLE
CON IMBOTTE ABBRACCIANTE T
CODICE DESCRIZIONE FORMULE
224
CONFIGURATORE INGRESSO
LUP LARGHEZZA UTILE PASSAGGIO L-29
HUP ALTEZZA UTILE PASSAGGIO H
LA LARGHEZZA ANTA (HUP+120)/2
HA ALTEZZA ANTA HUP+12
HC ALTEZZA SOTTO CASSA HUP+61
186
HSC ALTEZZA SOPRA CASSA HUP+186
T TRAVERSO AUTOMAZIONE
61
H=HUP
HA
421,7
411,9
L
LA
LA
29 LUP
T
2 ANTE TELESCOPICHE
13Hospital swing doors
Manual and automatic internal doors, with one or two leaves, suitable for all
hospital areas, laboratories, offices.
FLAT
DESCRIPTION
Swing airtight door, manual or
automatic, with coplanar panel
thicness 40 mm, external finish in
HPL, colors from sample book Abet.
Wall frame with rounded aluminium
profiles, telescopic, suitable for walls
plasterboard and masonry of variable
thickness.
Silver anodized or RAL painted
finishing.
MODELS
Automatic with Manual
KIT Proswing or SmartPRO with optional mechanical door
closer
1 wing 1 wing
2 wings 2 wings
14STB
DOOR PANEL
40 mm finished door panel consisting of a fir perimeter frame, surface in HPL or aluminium, double
support in MDF and core in polystyrene class “E”
Fishing of the borders of the panel with same color as the panel
Optional customization of the edges by adding “T” profile or with silver anodised “C” profiles, or with
7.5mm "U" aluminum profiles, not coplanar with the panel
External finish in HPL 0.9 mm fire retardant or stainless steel 10/10 Scotch-Brite finish
HPL colors from Abet sample book
Frame colors: ox silver and RAL 9010 (other RAL colors and other anodised finishes are available on
request)
GASKETS
Double neoprene perimeter gasket, bottom guigliottine gasket with single adjustment mechanism
(descent) characterized by the controlled movement of the mobile profile with gasket; immediate
descent from the hinge side of the door and consequent gradual descent for the entire length
STANDARD ACCESSORIES
n ° 3 silver aluminum hinges with anti-friction nylon bushing, latch lock, cylinder with n ° 2 keys, deadbolt
in double-leaf doors, safety-type handle in silver anodized aluminum
WALL FRAME
Rounded anodized aluminum profiles on telescopic frames (other colors RAL or anodized finishing are
available on request)
OPTIONS
▪ anti-grip handles, in aluminum or stainless steel
▪ protective bands
▪ windows
▪ version with 1‐ 2 - 3 mm lead shiels for X-ray rooms
15Hospital swing doors
ALU
DESCRIPTION
Aluminum door with panel insert
available in automatic or manual version,
40mm door blade, external finish in HPL,
colors from Abet sample book.
Wall frame with rounded aluminium
profiles, telescopic, suitable for walls
plasterboard and masonry of variable
thickness.
Silver anodized or RAL painted finishing.
MODELS
Automatic with Manual
KIT Proswing or SmartPRO with optional mechanical door
closer
1 wing 1 wing
2 wings 2 wings
16STB
DOOR PANEL
Door panel consisting of perimeter frame in aluminum, section 50/66, with lower crosspiece H 100
mm. Panel 40 mm thick , double support in mdf and core in polystyrene class "E" surrounded by plastic
laminate or alumnium coating.
External finish in HPL 0.9 mm fire retardant or stainless steel 10/10 Scotch Brite.
HPL, colors from Abet sample book
Panel colors aluminum version standard: RAL 9010, silver, RAL 1013, RAL 6005, RAL 7016,
Version with reducer profiles for laminated safety glass with transparent or opaque finish
Frame colors: ox silver and RAL 9010 (other RAL colors and other anodized finishes are available on
request)
GASKETS
Double neoprene perimeter gasket, bottom guigliottine gasket with single adjustment mechanism
(descent) characterized by the controlled movement of the mobile profile with gasket; immediate
descent from the hinge side of the door and consequent gradual descent for the entire length.
STANDARD ACCESSORIES
n ° 3 silver aluminum hinges with anti-friction nylon bushing, latch lock, cylinder with n ° 2 keys, deadbolt
in double-leaf doors, safety-type handle in silver anodized aluminum.
WALL FRAME
Rounded anodized aluminum profiles on telescopic frames (other colors RAL or anodized finishing are
available on request)
OPTIONS
▪ anti-grip handles, in aluminum or stainless steel
▪ protective bands
▪ windows
▪ version with 1‐ 2 - 3 mm lead shiels for X-ray rooms
17Hospital swing doors
FLAT 42 DB
DESCRIPTION
Aluminum door with finished panel available in automatic or manual versions, Swing
door with CERTIFIED NOISE REDUCTION at 42 dB, made with steel frame galvanized, RAL
standard painted or stainless steel 15/10 mm surface finishing, wall frame non-telescopic.
Suitable for plasterboard and masonry walls of any thickness
MODELS
Automatica con kit Manuale
Proswing o SmartPRO con o senza chiudiporta meccanico
1 anta 1 anta
2 ante 2 ante
CERTIFICATIONS
Test report for soundproofing N ° 264323 issued by Istituto Giordano S.p.A)
18STB
DOOR PANEL
Finished door panel thickness 58 mm consisting of a perimeter frame in wooden material, with
double overlap on three sides of the door, external coating in HPL and core made of sound-absorbing
materials.
Edges made with painted galvanized steel or stainless steel profile.
Made with flame retardant materials (HPL and 4 mm fire retardant MDF)
Panel colors: Abet / Polyrey colors available in door format
Frame colors: RAL painting
GASKETS
Double neoprene perimeter gasket, drop bottom guigliottine gasket with mechanism with a double
adjustment (descent and inclination) characterized by movement controlled (immediate descent
from the hinge side of the door e consequent gradual descent along the entire length) for an
adaptation to the floor, model 1770XNS No Sound with Rsw = 54 dB reduction certificate
STANDARD ACCESSORIES
n ° 3 VX7729 / 120 hinges in stainless steel suitable for a weight of 120 kg, external, lock with latch,
cylinder with 2 keys, deadbolt in double-leaf doors, handle in stainless steel
WALL FRAME
Frame with square profile, straight or rounded R15-R25, consisting of three elements to be screwed
at 45 °
Fixing of the wall frame to the wall with clamp, rapid block, holes for polyurethane foam injection
hidden under the wing stopper gasket and internal lining of the wall frame with acoustically material
performing
OPTIONS
▪ possibility to customize the door with the insertion of photographic laminates, aluminum inserts or
realization of the same in two-tone colors
▪ HPL laminate can be used on request with
antibacterial treatment obtained with silver ions
▪ footplate band and / or assembled floor board
coplanar with the laminate (in anodized aluminum
or stainless steel)
▪ panic bars
19FINISHES
Many different solutions, from the print subject to the surface finish,
the solutions in HPL guarantee maximum flexibility in realization and great
aesthetic impact.
Antibacterial solutions with polyvalent, resistant and hygienic coating.
Stainless steel is easy to clean, resistant to frequent washing and unassailable
by any chemical agents.
The glass divides the spaces in a discret way, with a filtered light that
create in the rooms a simple and natural atmosphere.
20FINISHES
DOOR PANEL
Thickness 0,9mm Thickness 0,9mm
fire retardant fire retardant
HPL ANTIBACTERIAL
Thickness 10/10 Flush with panel
Scotch-Brite
Maximun size
according to door
panel
STAINLESS STEEL GLASS
PROFILES
SILVER ANODIZED RAL COATING
21WALL FRAME
Fixed wall frame covering the perimeter wall on the
three sides , available in different
solutions, single, double or telescopic for walls with
different thickness.
Finishing in anodized aluminium, RAL coating or
Stainless Steel
TIPOLOGIA DI IMBOTTE MISURE + ACCESSORI IMBOTTE
SEMPLICE A
LTI=LI+50 GUARNIZIONE COPRICAVA
(LTI= LUNGHEZZA TAGLIO IMBOTTE)
45° TRAVERSO
45°
DOPPIO B
45°
45°
UTILIZZABILE SA SPESSORE
100
MURO DI 100mm IN SU'
(HTI= ALTEZZA TAGLIO IMBOTTE)
(HTI= ALTEZZA TAGLIO IMBOTTE)
SQUADRETTE DI GIUNZIONE
HTI=HI+50
HTI=HI+50
DOPPIO + PANNELLO TAMPONE C
FINITURA PANNELLO
TAMPONE MDF + :
L=
ABET : SQUADRETTA
FORNITA CON
ALLUMINIO OX N.4 GRANI
UNI 5923 M4x4
INOX
DOPPIA PER OGNI IMBOTTE COMPLETA
DA FORNIRE
NO PIOMBO MONTANTE SX MONTANTE DX
PIOMBO 1mm
PIOMBO 2mm
59
PIOMBO 3mm
60
PROLUNGHE PROLUNGHE
L=LUP+100
55
37 50
LUP
101
SP MURO
95
51
115
37
15
22ACCESSORIES
The range of Sesamo hospital doors can be completed with a wide range of accessories such as handles,
windows, with manual or electric Venetian blinds, electrical contacts and locks.
Sesamo automatisms can be completed with opening and safety devices such as sensors, selectors and
push buttons or with touchless activation.
- HANDLES
- PROTECTIVE BANDS
- ELECTRIC AND MANUAL LOCKS
- WINDOWS
23SESAMO SRL Str. Gabannone, 8/10 15030 Terruggia – AL – ITALY CALL Tel: +39 0142 403223 Fax: +39 0142 403256 ONLINE www.sesamo.eu info@sesamo.eu
You can also read
