COLD ECH - Componenti automazione Automation components Composants automation Componentes automatización - Coldtech
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
COLD ECH
Componenti automazione
Automation components
Composants automation
Componentes automatización
AUTOMATION COMPONENTS
STRONG 149
Automation system 148
MEDIUM 148
MEDIUM 148
designed for cold room doors Automation
WITH FRAME system 149
designed for cold room industrial doors WITH FRAME
Automation system 148
Down ramp 12 mm. Opening cover. Automation system 148
designed for cold roomPre-assembled.
doors WITH FRAMEtested in all its
Allow a loweing of 12 mm and
a 12 mm offset to compress the designed for coldPre-assembled
It allow s fast and easy
maintenance inspection.
in room
The doors
track comes to size, WITH
assembled and 400
FRAME
components,
Kg
The track comeselectrical
to size, panel, electric motor, wiring, etc...
gasket on the perimeter.
Down ramp 12mm
Opening cover
It allow s a fast and easy in
assembled and tested in all its
components, electric al panel,
0.28 m/’’
Allow a low ering of 12mm and a
12mm offset to compress the
gasket on the perim eter
maintenance inspection
Opening cover
Pre-assembled
electric motor, w iring, etc. ..
Pre-assembled
The track comes to size,
200200
Kg Kg
assembledThe and track
testedcomes to size,
in all its
Down ramp 12mm
Allow a lowDown
12mm offset
ering oframp
Allow
12mm 12mm
and a maintenance
a low eringtheof 12mm and a
to compress
Opening
It allow s a fast
It allow
cover
and easy in
s a fast and easy in
inspection
maintenance inspection
components, electriceal
assembl
components,
electric motor,
d and
paneltested
,
w iring, etc.electri
in all its
.. c al panel,
0.28 m/’’m/’’
0.28
12mm
gasket on the perimoffset
eter to compress the electric motor, w iring, etc. ..
gasket on the perim eter
|
| |
Reversible components.
All track components are reversible
compatible for both left and right
doors, fix ed to the profile without
Reversible components
drilling.
All track components are
rev ersible, compatible for both
left and right doors, fix ed to the
profile w ithoutcomponents
Reversible drilling
Pulleys. 24 Vdc gearmotor withAllencoder. Reversibleare
track components components Cold environments
rev ersible, All track components
for both are Ideal for large sized refrigerator doors
Complete with bearing Hight efficiency and reversible for compatible
wheel and adjustment left and revdoors,
right ersible,
fix compatible
ed to the for both thanks to the guarantee seal and
ultimate control off develeration and strong traction
to door minimum left drilling
profile w ithout and right doors, fix ed to the
position, with detection of obstacles inprofile w ithout drilling Cold environments
thickness 40mm. opening and closing. Cold environments
Ideal for medium-sized refrigerator
Pulleys Ideal for medium-sized
24 Vdc gearmotor with encoder doors thanks to the guarantee sealrefrigerator
Complete with bearing doors thanks to the guarantee seal
wheel and adjustm ent to High efficiency and reversible for
door minim um thic kness ultimate control off deceleration and
40mm position, with detection of obstacles
Pulleys in opening and closing
Pulleys
Complete with bearing Electrical panel 24 IP65.Vdc gearmotor
24 Vdc
with encoder
High efficiency andgearmotor with encoder
reversible for
wheel andComplete
adjustm entwith
to bearing Made of plastic, fixed on the machine,
High offefficiency and reversible for Full control "U8"
door minimwheel and adjustm ent to
um thic kness ultimate control deceleration and
wired to the motor and tested.
position, ultimate
with control
detection off deceleration and
of obstacles A single control unit, fits all models and
40mm door minim um thic kness Electrical panelinIP65 integrated functions
40mm opening position,
and closing with detection of obstacles
made of plastic, fix ed on theinmachine,
opening and closing
Push button IP65 wired to the motor and tested Full control "U8"
Directly connected to Full control
A single control unit, fits "U8"
all models and
the electric al panel Electrical panel IP65 A single control unit, fits all models and
integrated functions
Electrical
made of plastic, fix ed panel
on theIP65
machine, integrated functions
Pushbutton
button IP65IP65.
Push wired to themade
motorofandplastic,
testedfix ed on the machine,
Directy
Directl Push button
connected
y connected IP65
to to the wired to the motor and tested
electrical
the Directl
panel.
electric al y connected to
panel
the electric al panel
Advantages of a 24 Vdc automation
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
operating the reversal of the movement, in the event of contact with any obstacles Ability to remotely program all
Advantages of aof
24aVdc automation
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the
Advantages 24 Vdc automation
emergency batter ies to open and close the door
functions of the door without opening
the electric al panel
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
• Fast •openings the detection
24 Vdc electronics allows fine adjustment of analyzes
the operating speed and a
operatingObstacle
the reversal the 24 Vdc
of the movement, inelectronics
the event constantly the proper
of contact with any obstacles functioning of the door by Remote
Ability to remotel programmer
y program all
combination of smooth
operating the and quietofdoor
reversal the movement, in the event of contact with any obstacles functions ofAbilit
the ydoor
to remotel
withouty opening
program all
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the functions
the electric al panel of the door without opening
• Anti black-out in case of absence
emergency batter ies to open and close the door of electr ical energy, the control unit 24Vdc activates the the electric al panel
emergency
• Fast openings the 24batter
Vdcies to open and
electronics close
allows finethe door
adjustment of the operating speed and a
• Fastofopenings
combination smooth and thequiet
24 Vdcdoorelectronics allows fine adjustment of the operating speed and a
combination
www.dervet.com of smooth and quiet door
8
GB
www.dervet.com
www.dervet.com 6
3
GB GB
Tutte le informazioni riportate nel presente catalogo possono subire modifiche e cambiamenti6 in qualunque momento ad insindacabile giudizio della COLDTECH srl.
All descriptions and specifications are subject to change by Coldtech s.r.l. at any time without notice.
AUTOMATION COMPONENTS
COLD ECH
MEDIUM 148
Kit with chain (belt) holder profile WIRED
MEDIUM 148
Automation system 148
designed for cold room doors WITH FRAMEA1X1330
A1X1320
Automation system 148
designed for cold room doors WITH FRAME
Opening cover
Pre-assembled
The A1X2460
track comes to size,
200 Kg
assembled and tested in all its
Down ramp 12mm
Allow a low ering of 12mm and a
It allow s a fast and easy in
maintenance inspection
components, electric al panel, 0.28 m/’’
12mm offset to compress the
gasket on the perim eter A1X1358
Opening cover
electric motor, w iring, etc. ..
A1W0100
Pre-assembled
The track comes to size,
200 Kg A1X1365
assembled and tested in all its
Down ramp 12mm
Allow a low ering of 12mm and a
12mm offset to compress the
It allow s a fast and easy in
maintenance inspection
components, electric al panel,
electric motor, w iring, etc. ..
A1W0100
0.28 m/’’
gasket on the perim eter A1X1600
A1X1750
URV4010
URV4015 A1W2021
UMC0N08
|
A1V0025
UER2302
A1V0005
UEE2101 A1X1550
A1X21E0
A1X1506 |
A1X1801
A1X1854
Reversible components
All track components are
rev ersible, compatible for both
left and right doors, fix ed to the
profile w ithout drilling
Reversible components
All track components are Cold environments
Ideal for medium-sized refrigerator
rev ersible, compatible for both
left and right doors, fix ed to the doors thanks to the guarantee seal
profile w ithout drilling
Cold environments
A1V0035
Ideal for medium-sized refrigerator
Pulleys
Complete with bearing 24 Vdc gearmotor with encoder doors thanks to the guarantee seal
High efficiency and reversible for
wheel and adjustm ent to
door minim um thic kness ultimate control off deceleration and
40mm A1V0012 position, with detection of obstacles
Pulleys in opening
Complete with bearing 24 Vdcand closing with encoder
gearmotor
High efficiency and reversible for
wheel and adjustm ent to Full control "U8"
door minim um thic kness ultimate control off deceleration and A single control unit, fits all models and
40mm position, with detection of obstacles
Electrical panel IP65 integrated functions
in opening and closing
made of plastic, fix ed on the machine,
Push button IP65 wired to the motor and tested Full control "U8"
Directly connected to A single control unit, fits all models and
the electric al panel Electrical panel IP65 integrated functions
made of plastic, fix ed on the machine,
Push button IP65 wired to the motor and tested
Directly connected to
the electric al panel
Advantages of a 24 Vdc automation
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
operating the reversal of the movement, in the event of contact with any obstacles Ability to remotely program all
Advantages of a 24 Vdc automation
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the
functions of the door without opening
the electric al panel
emergency batter ies to open and close the door
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
• Fast openings the 24 Vdc electronics allows fine adjustment of the operating speed and a Ability to remotely program all
operating the reversal of the movement, in the event of contact with any obstacles
combination of smooth and quiet door functions of the door without opening
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the the electric al panel
emergency batter ies to open and close the door
• Fast openings the 24 Vdc electronics allows fine adjustment of the operating speed and a
combination of smooth and quiet door
www.dervet.com
6
4
GB
Tutte le informazioni riportate nel presente catalogo possono subire modifiche e cambiamenti in qualunque momento ad insindacabile giudizio della COLDTECH srl.
All descriptions and specifications are subject to change by Coldtech s.r.l. at any time without notice.
www.dervet.com GB
AUTOMATION COMPONENTS
COLD ECH
MEDIUM 148
kit without chain (belt) holder profile WIRED
A1X1412 belt
Automation system 148
A1X1414 chain
designed for cold room doors WITH FRAME
Opening cover
Pre-assembled
The track comes to size,
200 Kg
assembled and tested in all its A1X1676
Down ramp 12mm
Allow a low ering of 12mm and a
12mm offset to compress the
It allow s a fast and easy in
maintenance inspection
components, electric al panel,
electric motor, w iring, etc. ..
0.28 m/’’
gasket on the perim eter
A1X1341
UPC8M15 belt
UMC0N08 chain
A1X1700 belt
A1X1750 chain
B1X2510 belt
|
URV4010 belt A1X2460 B1X2530 chain
URV4015 chain
A1X1505
A1X1801
A1X21E0
A1X1824 belt
A1x1854 chain Reversible components
All track components are
UER2302 rev ersible, compatible for both
left and right doors, fix ed to the
profile w ithout drilling
Cold environments
Ideal for medium-sized refrigerator
doors thanks to the guarantee seal
A1V0053
Pulleys
Complete with bearing 24 Vdc gearmotor with encoder
High efficiency and reversible for
wheel and adjustm ent to
door minim um thic kness ultimate control off deceleration and
40mm position, with detection of obstacles
in opening and closing
Full control "U8"
A single control unit, fits all models and
Electrical panel IP65 integrated functions
made of plastic, fix ed on the machine,
Push button IP65 wired to the motor and tested
Directly connected to
the electric al panel
Advantages of a 24 Vdc automation
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
operating the reversal of the movement, in the event of contact with any obstacles Ability to remotely program all
functions of the door without opening
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the the electric al panel
emergency batter ies to open and close the door
• Fast openings the 24 Vdc electronics allows fine adjustment of the operating speed and a
combination of smooth and quiet door
5
www.dervet.com
Tutte le informazioni riportate nel presente catalogo possono subire modifiche e cambiamenti in6qualunque momento ad insindacabile giudizio della COLDTECH srl.
GB
All descriptions and specifications are subject to change by Coldtech s.r.l. at any time without notice.
AUTOMATION COMPONENTS
COLD ECH
MEDIUM 148
Kit Motor and electronic components NOT WIRED
Automation system 148
designed for cold room doors WITH FRAME
Opening cover
Pre-assembled
The track comes to size,
200 Kg
assembled and tested in all its
Down ramp 12mm
Allow a low ering of 12mm and a
12mm offset to compress the
It allow s a fast and easy in
maintenance inspection
components, electric al panel,
electric motor, w iring, etc. ..
0.28 m/’’
gasket on the perim eter
A1X2460
|
UPC8M15
URV4010
A1X21E0
UER2302 A1X1801
A1X1824 Reversible components
All track components are
rev ersible, compatible for both
left and right doors, fix ed to the
profile w ithout drilling
Cold environments
Ideal for medium-sized refrigerator
doors thanks to the guarantee seal
Pulleys
Complete with bearing 24 Vdc gearmotor with encoder
High efficiency and reversible for
wheel and adjustm ent to
door minim um thic kness ultimate control off deceleration and
40mm position, with detection of obstacles
in opening and closing
Full control "U8"
A single control unit, fits all models and
Electrical panel IP65 integrated functions
made of plastic, fix ed on the machine,
Push button IP65 wired to the motor and tested
Directly connected to
the electric al panel
Advantages of a 24 Vdc automation
• Obstacle detection the 24 Vdc electronics constantly analyzes the proper functioning of the door by Remote programmer
operating the reversal of the movement, in the event of contact with any obstacles Ability to remotely program all
functions of the door without opening
• Anti black-out in case of absence of electr ical energy, the control unit 24Vdc activates the the electric al panel
emergency batter ies to open and close the door
• Fast openings the 24 Vdc electronics allows fine adjustment of the operating speed and a
combination of smooth and quiet door
6
Tutte
Tutteleleinformazioni
informazioniriportate
riportatenel
nelpresente
www.dervet.com
presentecatalogo
catalogopossono
possonosubire
subiremodifiche
modificheeecambiamenti 6 momento
cambiamentiininqualunque
qualunque momentoad adinsindacabile
insindacabilegiudizio
giudiziodella
dellaCOLDTECH
COLDTECHsrl.
srl.
GB
All
Alldescriptions
descriptionsand
andspecifications
specificationsare
aresubject
subjectto
tochange
changeby
byColdtech
Coldtechs.r.l.
s.r.l.atatany
anytime
timewithout
withoutnotice.
notice.
AUTOMATION COMPONENTS
COLD ECH
Mechanical components
URV3010 Worm gearbox ratio 1:10 URV4010 Worm gearbox ratio 1:10
URV3015 Worm gearbox ratio 1:15 URV4015 Worm gearbox ratio 1:15
Aluminium alloy housing, high efficiency for Aluminium alloy housing, high efficiency for
A1X2450 120W motor A1X2460 250W motor
B1X2710 VSF complete motor shaft D=14 A1X1801 VSF complete motor shaft D=19
Motor shaft for worm gearbox URV30__ Motor shaft for worm gearbox URV40__
complete with self-locking ring nuts and complete with self-locking ring nuts and
splines splines
Material: stainless steel Material: stainless steel
UPC8M15 Toothed belt HTD8 UMC0N08 Roller chain 1/2"
High-strength HTD8 profile internally rein- Material: tempered steel
forced with steel
Material: poly urethane in White
A1X1700 Complete idler pulley A1X1750 Complete 1/2" chain idler pulley
On shielded ball bearing gear wheel on shielded ball bearing
Material: stainless steel and high-strength Material: galv aniz ed steel
thermoplastic
A1X1824 Complete motor pinion Z24 A1X1852 Complete Z16 motor pinion
Pinion for HTD8 toothed belt Pinion for 1/2" roller chain
Material: stainless steel Material: galv aniz ed steel
B1X2510 Complete belt tensioner clamp HTD8 B1X2530 Complete chain clamp
Same model for left and right-hand sliding Same model for left and right-hand sliding
doors doors
Material: galv aniz ed steel Material: galv aniz ed steel
www.dervet.com
17
7 GB
Tutte le informazioni riportate nel presente catalogo possono subire modifiche e cambiamenti in qualunque momento ad insindacabile giudizio della COLDTECH srl.
All descriptions and specifications are subject to change by Coldtech s.r.l. at any time without notice.
AUTOMATION COMPONENTS
COLD ECH
Electrical components
Pull cord switch UEE2101 433 MHz plug-in receiver
A1V0005 complete with stainless steel bracket, cable Superheterodyne radio receiv er to be
and knob plugged directly into the control board
A1V0065 RADIO pull cord switch 433 MHz A1V0064 433 MHz four-channel remote control
IP65 box with cable and knob, code pro- IP65 plastic box, remote control, code
grammable v ia dip sw itc hes (1024 combi- programmable via dip switches (1024
nations) combinations)
A1V0012 PNP Photocell kit UEE2141 433 MHz four-channel remote control
Infrared barrier consis ting just of a pair of Remote control, code programmable v ia
compact sensors with built-in electronic s, dip sw itches (1024 combinations)
complete with connector to be connected
directly to control board
A1V0015 Backup battery kit 3.3 A series 147/149 UEE2151 433 MHz wireless keyboard
backup batteries for operation in the event Remote control, programmable code
of a power failure (99999 combinations)
24VDc flashing light UEE2130 Complete infrared programmer
A1V0025 in yellow, complete w ith bulb and cable Can be used for programming a short
clamp distance from the display w ithout opening
the electric al panel. (the display must be
visible)
A1V0053 Standard push button A1X2460 24VDc 250 W motor
In plastic material IP65 with START, STOP Direct current electric motor with high
and PARTIAL button starting torque, essential for lifting the
sliding door off the ramps during opening.
A1V0058 Push button with display A1X2450 24VDc 120 W motor
In plastic material IP65 with START, STOP Direct current electric motor with high
and tw o-digit dis play starting torque, essential for lifting the
sliding door off the ramps during opening.
A1V0051 Push button with 1 start A1X21E0
In plastic material IP65 with START button
24Vdc control board + display
designed to operate the 24VDc motors,
the controller includes a tw o-digit
remote display
A1V0061 Wireless push button 433 MHz with1
start
In plastic material IP65 with START button
and programmable with dip-switch (1024
combinations)
UER2302 250VA 230V transformer UER2301 150VA 230V transformer
Double-insulated toroidal transformer Double-insulated toroidal transformer
insulation class B insulation class B
www.dervet.com
16
8 GB
Tutte le informazioni riportate nel presente catalogo possono subire modifiche e cambiamenti in qualunque momento ad insindacabile giudizio della COLDTECH srl.
All descriptions and specifications are subject to change by Coldtech s.r.l. at any time without notice.
COLD ECH COLDTECH s.r.l. Sede legale: C.so Francia 274 Sede operativa: Via Rivera 136/2 10093 Collegno (TO) - Italy 10040 Almese (TO) - Italy P.IVA 09393210019 Tel. ++39 011. 9370518 Fax ++39 011.9319297 www. coldtech. tech email: coldtech@coldtech.it
You can also read
