HIGH PERFORMANCE BUILDING PRODUCTS - Fast Track Solutions for Professionals BUILDING MATERIALS - ARDEX UK
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
HIGH PERFORMANCE
BUILDING PRODUCTS
Fast Track Solutions for Professionals
BUILDING MATERIALS DECORATING & INTERIORS
CEMENTS & FLOORING, TILING &
BUILDING CHEMICALS WALL PREPARATION
For more than 60 years, ARDEX has been the quality leader,
and brand of choice for contractors and merchants.
Fast Track Solutions for Professionals
CLASS LEADING SYSTEM SOLUTIONS INNOVATIVE
CONSISTENT QUALITY ADDED VALUE TECHNICAL ADVICE
SITE SUPPORT TRAINING SPECIFICATION WRITING
01440 714939
info@ardex.co.uk www.ardex.co.uk
sponsor
Reg No. FM 1207 EMS 565427 OHS 628374
2
BUILDING MATERIALS
CEMENTS
Screed Cements 4-5
Floor Levelling 6-10
BUILDING CHEMICALS
Concrete Repair 11-12
External Resurfacing 13
Construction Adhesive 14
Crack Repair 15
DECORATING & INTERIORS
FLOORING
16-17
Moisture Control
18
Flooring Adhesive
TILING
19
Tanking & Waterproofing
20-22
Tile Adhesives
Tile Grouts & Silicones 23-26
PREPARATION
27-30
Wall Repair & Smoothing
PRIMERS & ANCILLARY PRODUCTS
31
3
RAPID DRYING CEMENT FOR FLOOR SCREEDS
ARDEX A 29
n Install ceramic tiles in as little as 24 hours and all
other floorcoverings after only 7 days
n O
utstanding performance at a true 1:7 mix
n E
xtended 90 minute working time
n P
asses the BRE (ISCR) Screed Test in as little as
24 hours
ARDEX A 29 combines excellent workability, speed and performance. Developed to perform in real UK site
conditions, it offers unique application and performance benefits to professional builders.
Installation Schedule Pack Size
THICKNESS: WORKING TIME: WALK ON: DRYING TIME: Consumption:
20mm - 75mm 90 minutes 8 hours From 7 Days 0.27kg per m2/mm
20kg
Suitable for:
Internal and external use Bonded, unbonded, and floating screeds
Wet areas Underfloor heating systems
All floor finishes Pump or hand application
4
QUICK DRYING LIQUID SCREED
ARDEX A 70 GYPFLO
n Walkable in as little as 6 hours
n Ready to receive floorcoverings in as little as 14 days
n E
xcellent flow properties
n L
ow shrinkage minimises cracking and curling
n P
re-blended for consistency and convenience
n J ust add water
ARDEX A 70 GYPFLO is a quick drying, flowable Calcium Sulphate screed that is specially formulated to receive
floorcoverings in as little as 14 days – over twice as fast as standard Calcium Sulphate screeds.
Installation Schedule Pack Size
THICKNESS: WORKING TIME: WALK ON: DRYING TIME: Consumption:
30mm - 45mm 120 minutes 6 hours From 14 Days 0.27kg per m2/mm
25kg
Suitable for:
Internal use Unbonded and floating screeds
Pump or hand application Underfloor heating systems
All floor finishes
5
RAPID SETTING LATEX FLOOR LEVELLING AND SMOOTHING COMPOUND
ARDITEX NA
Over Over Old
Screeds/Cement Adhesives Over Plywood
Over DPMs Over Steel Over Bitumen
n Ideal for renovation projects or problematic substrates
n Install floorcoverings after 4 hours, and ceramic tiles in
as little as 3 hours
MED Modules B and
D Approved
n Can
be used with confidence over old adhesive residues
including bitumen
n E
xcellent adhesion without priming to almost all
substrates including flooring grade plywood
Pumpable n Unaffected by moisture
n F
eather edge to 12mm in one application (30mm
incorporating ARDEX Coarse Aggregate)
n Use
with ARDEX Damp Proof Membranes for the
ultimate fast track floor renovation system
ARDITEX NA is a self-smoothing, protein free, latex levelling compound with improved flow and excellent adhesion,
flexibility and moisture resistance. These unique properties ensure that ARDITEX NA can be used with confidence
over almost all subfloors without priming.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
0-30mm 20 minutes After 2 hours From 3 hours 5m2 at 3mm
per bag 20kg
5kg
Suitable for:
Covering ceramic tiles Concrete Gypsum/anhydrite (prime first)
Sand and cement screeds Steel floors Bitumen and adhesive residue
Flooring grade plywood DPMs Underfloor heating systems
6
LATEX FLOOR LEVELLING AND SMOOTHING COMPOUND
ARDITEX CL
n Ideal for new build projects
n A
pply floorcoverings after 12 hours
n Receives
light foot traffic in as little as 2 hours
n E
xcellent flow and application properties
n Can be used on heated screeds
n Feather
edge to 10mm in a single application (30mm
incorporating ARDEX Coarse Aggregate)
ARDITEX CL is a two part levelling and smoothing compound with excellent flow and application properties. For
smoothing and levelling most common internal subfloors such as concrete, sand and cement or Gypsum (anhydrite)
based screeds. Prime the substrate before application with ARDEX P 51.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
0-30mm 20 minutes After 2 hours From 12 hours 5m2 at 2-3mm
per bag 20kg
5kg
Suitable for:
Sand and cement screeds Concrete Gypsum/anhydrite (prime first)
7
RAPID DRYING SMOOTHING AND PATCHING COMPOUND
ARDITEX FEATHER FINISH
n Install floorcoverings after 15 minutes
n True
feather edge allows for greater coverage - up to
50m2 coverage per 11kg bag
n Ideal for patching and smoothing minor surface damage
to levelling and smoothing compounds
n E
xceptional bond to plywood, concrete, smoothing
compounds, terrazzo and ceramic tiles, without the
need to prime
n Easy to mix and apply, just add water
ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond
strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the
need to prime. Ideal for use prior to the installation of resilient floorcoverings such as vinyl sheet or LVT.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
0-3mm 15 minutes After 15 minutes From 15 minutes 50m2 with skim
coat per 11kg bag 11kg
or
5kg
Suitable for:
Skimming plywood Smoothing ridges Uneven trowel marks
Patching and filling Depressions Old adhesive residue
Flooring grade plywood Existing smoothing compounds Sand and cement screeds
8
LEVELLING AND SMOOTHING COMPOUND
ARDEX K 11
n W
alkable in 2.5 hours regardless of thickness
n Free
flowing mortar 1.5mm – 10mm
n R
eceives floorcoverings the next day
n Suitable for floors with underfloor heating
Pumpable n E
xcellent surface finish even in thinner layers
n Low
odour and high yield
ARDEX K 11 is a cost effective free flowing rapid hardening levelling and smoothing compound designed for a wide
range of subfloor types including sand/cement screeds, gypsum screeds and concrete.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
1.5-10mm 30 minutes After 2.5 hours From 16 hours 4.7m2 at 3mm
per bag
22kg
Suitable for:
Concrete Traces of adhesive residue Underfloor heating systems
Sand and cement screeds Gypsum/anhydrite (prime first) DPMs
9
HIGH BUILD LEVELLING AND SMOOTHING COMPOUND
ARDEX K 15 HB
n A
pply from 5mm to 35mm in one operation
n Rapid
hardening - walkable in approximately 2 hours,
even with thick applications
n D
ry within 24 hours regardless of thickness
Pumpable n Ceramic floor tiles can be fixed after 4 hours
n C
an be hand mixed or pump applied
n Strong
- high compressive strength
ARDEX K 15 HB is an advanced and versatile high build levelling compound designed for applications from 5mm up
to a maximum of 35mm. It is virtually tension free and is designed to rapidly level uneven, hard subfloors.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
5-35mm 30 minutes 2 hours From 24 hours 2.7m2 at 5mm
per bag
25kg
Suitable for:
Concrete Traces of adhesive residue Underfloor heating systems
Pre-cast concrete Gypsum/anhydrite (prime first) DPMs
Sand and cement screeds
10MULTI-PURPOSE REPAIR MORTAR
ARDEX A 46
n E
N 1504 R2 polymer modified cementitious repair mortar
n Ideal for repairing damaged concrete
n No priming required
n S
ets within 30 minutes
n S
lump free – ideal for vertical and overhead repairs
n E
asy to smooth and float
n Shrinkage compensated
ARDEX A 46 is a slump free, rapid setting mortar for repairs, smoothing and refacing. Suitable for external and
internal use, it sets in only 30 minutes and can receive finishes in 4 hours regardless of thickness.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: SETTING TIME: COVERAGE:
2-50mm 15-20 minutes 30 minutes 4m2 at 2mm
per 11kg
11kg
5kg
Suitable For:
Damaged concrete Repairing bug holes Gaps
Building ramps Stair nosings Wall edges
Filling tie bolt holes Cracks Soffit repair
11FAIRING COAT AND FINE REPAIR MORTAR
ARDEX A 125
n EN 1504 R1 polymer modified cementitious repair mortar
n Ideal for the vertical and overhead repair of surface defects
and damage
n Finishes to a smooth surface suitable for painting
n F
ast track - ready to receive decorative finishes the next day
n Extended pot life of 4 hours
n Increased coverage over traditional fairing coats
n N
on-combustible – reaction to fire Class A1 (EN 13501-1)
n E
N 1504 certified and CE Marked
ARDEX A 125 is a grey, cement-based, fine coat finishing render, fairing coat and fine repair mortar. Suitable for the
rapid repair of many types of concrete surface imperfections, to produce a level and smooth finish. Can also be used
on blockwork and renders.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: DRYING TIME: COVERAGE:
0-5mm Approx 30 minutes 24 hours 5m2 at 3mm
thick
22kg
Suitable for:
Vertical and overhead Blockwork Internal and external use
Concrete Sand renders Receiving cement resistant coatings
Brickwork Receiving paint
12EXTERIOR SELF LEVELLING CONCRETE RESURFACING COMPOUND
ARDEX K 301
n F
lowable cementitious levelling and repair compound for
the repair and levelling of rough or damaged concrete
n Suitable
for internal and external applications onto
concrete and bonded sand/cement screeds
n F
or smoothing and resurfacing paths, drives, domestic
parking areas, courtyards, etc.
n Fast setting - walkable after 2-3 hours
n R
apid hardening - can withstand light vehicular traffic
after 48 hours
n Apply from 2mm to 20mm thick in a single application
ARDEX K 301 is fast setting resurfacing compound, ideal for exterior concrete areas including damaged drives, paths,
patios and larger surface areas such as domestic car parks and courtyards. It is easy to mix and apply and can be
pumped for faster application.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
2-20mm 30 minutes After 2-3 hours 48 hours 3m2 at 5mm
per bag
25kg
Suitable for:
Driveways Balconies Walkways
Court yards Patios
Parking areas Domestic garages
13MULTI-PURPOSE CONSTRUCTION ADHESIVE AND SEALANT
ARDEX CA 20 P
n B
onds virtually every building material
n Solvent
free and low odour
n S
hrinkage free
n High initial tack and bond strength
n C
an even be used underwater, for minor repair
applications
n Excellent resistance to UV, weather and ageing
ARDEX CA 20 P is suitable for a wide range of site applications, as an adhesive and sealant, for general building
maintenance on floors and walls in internal and external locations.
Installation Schedule Pack Size
WORKING TIME: WALK ON: SKINNING TIME: CURE TIME: COVERAGE:
30 minutes After 2-3 hours 10 mins 28 hours 1/4” bead =
9.75 lin/m
310ml
Suitable for:
Bonding skirting boards Stair nosings Adhering boxes/conduits
Dado rails, architrave, kick plates Edge trims Ceramic tile repairs
Carpet gripper Underwater applications Sealing around baths & sinks
14RAPID HARDENING CRACK REPAIR KIT
ARDEX P 10 SR
n Easy to use, no mixing equipment required
n Fast setting and load bearing in as little as 20 minutes
NEED n Full kit provided for the stitch repair of cracks and joints
IMAGE OF
PRODUCT n Low viscosity with high penetrating capabilities
n Odourless and low emissions
ARDEX P 10 SR is designed for the rapid repair of non-structural cracks, joint sealing and as a rapid hardening
general-purpose adhesive. The kit is very easy to use and includes stitching pins, protective gloves and mixing/dosing
bottles.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: DRYING TIME: COVERAGE:
Variable 10 minutes 20 minutes 20 minutes 4 Linear meters
2x
300ml
Suitable for:
Concrete Metal Wood
Sand and cement screeds Plastic Underfloor heating systems
15ONE COAT SURFACE DAMP PROOF MEMBRANE
ARDEX DPM 1 C
n P
rotects the floorcovering from residual construction
moisture and rising damp
n C
an be used where a structural DPM is not present or is
ineffective (common in pre 1970s structures)
n A
ccommodates Hygrometer readings up to 98% RH in
one coat
n A
dheres well to wet concrete even at 10°C
n Suitable for flooring with underfloor heating systems
Apply ARDEX DPM 1 C to protect the floorcovering installation from ground bearing moisture and residual
construction moisture. Ideal for use where there is no functioning structural DPM (common in older properties).
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: WALK ON: OVER COAT TIME: COVERAGE:
250-350 microns 20 minutes 6 hours 6 hours Up to 25m2
per 10kg unit 10kg
Suitable for:
Sand and cement screeds Up to 98% RH Saturated Concrete
Gypsum/anhydrite (Prime first) Residual construction moisture Underfloor heating systems
Concrete slabs
16ONE COMPONENT MOISTURE VAPOUR SUPPRESSANT
ARDEX A MVS 95
n P
rotects floors from residual construction moisture in
new concrete slabs and sand/cement screeds
n F
ast drying – ARDEX Levelling and Smoothing
Compounds can be applied in as little as 2 hours
n A
pply ARDEX Levelling and Smoothing Compounds
direct without priming
n Suitable for use on heated screeds
n Ready for use, resealable and reusable
n Water-based, low VOC technology
ARDEX MVS 95 protects the final floorcovering from residual construction moisture, ensuring fast track flooring
installations. ARDEX MVS 95 is ideal for use in new construction or refurbishment projects where a structural damp
proof membrane is present and the relative humidity of the floor does not exceed 95% RH.
Installation Schedule Pack Size
THICKNESS: WORKING TIME: WALK ON: OVER COAT TIME: COVERAGE:
150 - 200 microns 90 minutes 2 hours From 2 hours Up to 36m2
per 12kg unit
12kg
Suitable for:
Sand and cement screeds Up to 95% RH Concrete slabs
Residual construction moisture Underfloor heating systems
17UNIVERSAL FLOORING ADHESIVE
ARDEX AF 2365
Vinyl sheet Cushioned vinyl LVT
Textiles Rubber flooring Linoleum
n Suitable for installing all main floorcovering types
n H
igh temperature resistance, suitable for use over
underfloor heating systems
n S
olvent free
n V
ery low emissions
n O
nce applied, floorcoverings can be installed up to 40
minutes later
ARDEX AF 2365 is a universal adhesive, ideal for installing all types of vinyl floorcoverings, textiles, linoleum and
rubber up to 2.5mm thick. It offers excellent application properties and is protected from biodegradation.
Installation Schedule Pack Size
APPLICATION: AIRING TIME: WORKING TIME: OPEN TIME: Coverage:
A1/A2/B1/B2 trowel 0-20 minutes 10-40 minutes 15-50 minutes Up to 67m2
per 14kg unit
14kg or
6kg
Suitable for:
Luxury Vinyl Tiles and Planks Linoleum Jute/hessian backed lino
Textiles Rubber up to 2.5mm Carpet
Cushioned Vinyl Vinyl Sheet Carpet tiles
18WATERPROOF PROTECTION SYSTEM
ARDEX WPC
n T
he British Standard for Tiling recommends that wet areas are
protected by a tanking system (BS 5385)
n Flexible Rapid Drying Waterproof Coating for Internal Wet Areas
n Can also be used to fill holes, gaps and joints
n T
ile after only 90 minutes
n Quick and easy to apply with a roller, paint brush or trowel
n FREE roller & scrim tape in every box
n Ideal for internal wet rooms, power showers and bathrooms
ARDEX WPC is a rapid drying waterproof protection coating that allows tiling to commence after just 90 minutes.
The adjustable mix ratio means you can make a thicker mix to fill small cracks, gaps and joints with a small trowel,
then a thinner mix to cover the walls with the roller. Available in white or grey.
Installation Schedule Pack Size
APPLICATION: POT LIFE: TILE AFTER: COVERAGE:
45 minutes 90 minutes 6.6m2 per 10kg unit
10kg
Suitable for:
Cement Gypsum plaster Plasterboard
Wood based materials Sand and cement screeds Sealing joints
Filling gaps and holes
19MICROTEC® FLEXIBLE STANDARD SET TILE ADHESIVE
ARDEX X 77
n F
ix any tile size or type without slipping and without battens
n S
pend less time mixing and more time fixing, with a 3-hour pot life
and 60 minute open time
n G
et up to 8m2 from every bag, with a high yield formulation that
goes up to 40% further than leading competitors
n Ideal for almost all tile types including porcelain and non-moisture
sensitive natural stone
n Suitable for internal and external areas, including swimming pools
n Suitable for use with underfloor heating
n 10kg bag comes inside FREE mixing bucket
ARDEX X 77 MICROTEC® Flexible Standard Set Tile Adhesive has been specifically engineered to fit today’s tiles
with ease, whilst also providing additional performance benefits that support modern fixing practices. Suitable for
both floor and wall tilling including large format tiles. Available in grey or white.
Installation Schedule Pack Size
POT LIFE: OPEN TIME: GROUT AFTER: COVERAGE:
3 hours 60 minutes Walls - 8 hours 8m2 per 20kg bag
Floors - 24 hours
20kg 10kg
Suitable for:
Plasterboard backgrounds Wood boards and sheets Aslphalt
Gypsum plaster Painted surfaces Gypsum/anhydrite screeds
Sand and cement screeds Existing ceramic tiling Underfloor heating systems
20THICK BED FLOOR TILE ADHESIVE
ARDEX X 325
n A
pply 3-25mm thick to level uneven floors and fix tiles in a single
application
n S
olid bed fix large format floor tiles without back-buttering
n G
rout after just 3 hours
n Ideal for almost all tile types including porcelain and non-moisture
sensitive natural stone
n Suitable for internal and external areas, including swimming pools
n Suitable for use with underfloor heating
ARDEX X 325 PTB is an advanced pourable thick bed tile adhesive that’s the ideal all-in-one product for levelling
uneven floors and fixing large format floor tiles.
Installation Schedule Pack Size
POT LIFE: OPEN TIME: GROUT AFTER: COVERAGE:
30 minutes 20 minutes Floors - 3 hours 4.8m2 at 3mm
per 20kg bag
20kg
Suitable for:
Sand and cement screeds Wood boards and sheets Swimming pools
Gypsum/anhydrite screeds Painted surfaces Adhesive residues
Underfloor heating systems Wet areas Asphalt
21FLEXIBLE STANDARD SET TILE ADHESIVE
ARDEX X 7
n Extended pot life of 5 hours
n Excellent workability and slump resistance
n Ideal for almost all tile types including non-moisture sensitive
natural stone
n Suitable for wall and floor applications
n Suitable for internal and external areas, including swimming pools
n Suitable for use with underfloor heating
n Frost and weather resistant
ARDEX X 7 is a versatile multi-purpose tile adhesive, with enhanced properties of adhesion, suitable for fixing
ceramic, porcelain, glass mosaics, and most non-moisture sensitive natural stone floor and wall tiles. Available in
both white and grey.
Installation Schedule Pack Size
POT LIFE: OPEN TIME: GROUT AFTER: COVERAGE:
5 hours 30 minutes Floors - 8 hours 5.1m2 per
20kg bag
20kg
Suitable for:
Sand and cement screeds Wood boards and sheets Existing glazed tiles
Anhydrite screeds Painted surfaces Gypsum plaster
Underfloor heating Plasterboard Asphalt
22FLEXIBLE TILE GROUTS
ARDEX-FLEX FS & ARDEX-FLEX FL
n Available in 35 colours
n N
o colour variation or streaking during mixing
n W
ater repellent and dirt resistant
n Easy to apply and clean off the tile surface
n S
uitable for floor and wall tiling
n F
or internal and external applications,
including heated subfloors
ARDEX-FLEX Flexible Tile Grouts are available in 35 colours that blend uniformly to ensure a consistent, streak-
free finish. They are suitable for commercial and domestic environments, including swimming pools, showers and
kitchens.
Installation Schedule Pack Size
GROUT WIDTH: WORKING TIME: WALK ON TIME: COVERAGE:
FS up to 4mm FS 2.5hrs FS 5hrs Refer to
FL 3mm-15mm FL 30mins FL 90mins datasheet
10kg
5kg
2.5kg
Suitable for:
Ceramic and porcelain tiles Extruded tiles Glass blockwork
Non-moisture sensitive Non-moisture sensitive Internal and external use
natural stone quarry tiles
23GROUT COLOUR GUIDE
ALSO IN ARDEX ST ALSO IN ARDEX ST
01 Brilliant White 08 Floating Driftwood 15 Oyster Pink 22 Grey Dusk 29 Winter White
ALSO IN ARDEX ST
02 Blossom White 09 Fresh Snowdrop 16 Organic Earth 23 Stormy Mist 30 Spring Green
ALSO IN ARDEX ST ALSO IN ARDEX ST ALSO IN ARDEX ST
03 Antique Ivory 10 Gentle Blush 17 Dove Grey 24 Cast Iron 31 Summer Yellow
ALSO IN ARDEX ST ALSO IN ARDEX ST ALSO IN ARDEX ST
04 Spring Jasmine 11 Stone Beach 18 Silver Shimmer 25 Innocent Black 32 Autumn Red
ALSO IN ARDEX ST ALSO IN ARDEX ST
05 Gentle Dawn 12 Barley Sugar 19 Ocean Grey 26 Coffee Bean 33 Weathered Ash
ALSO IN ARDEX ST ALSO IN ARDEX ST
06 Natural Almond 13 Fresh Magnolia 20 Slate Grey 27 Ground Cocoa 34 Woodland Taupe
07 Classic Vanilla 14 Wild Mushroom 21 Pebble Drift 28 Burnt Orange 35 Pecan Syrup
Due to the printing process, all colours shown are approximate.
FREE colour sample
sticks or a complete
grout fan on request
24EPOXY TILE GROUT AND ADHESIVE
ARDEX EG 8 PLUS
White Grey Silver Grey
Bahama Beige Anthracite
n C
ombines the chemical resistance of epoxy grouts with the
enhanced application properties of cement-based grouts
n C
an be cleaned off in as little as 15 minutes and up to 60
minutes after application
n E
asier to use than traditional epoxy grouts with no special
application tools required
n R
esists chemical attack, and is waterproof and abrasion-
resistant
n H
ygienic and durable for a reduced maintenance schedule
n S
uitable for floor and wall tiling
ARDEX EG 8 PLUS has high chemical and abrasion resistance, and being impervious it also produces hygienic joints
that require minimal maintenance. Unlike traditional epoxy grouts however, it is easy to apply and clean off up to 60
minutes after application.
Installation Schedule Pack Size
GROUT WIDTH: WORKING TIME: WALK ON TIME: COVERAGE:
1-10mm 30 minutes 12 hours Refer to datasheet
4kg
Suitable for:
Swimming pools Showers Bathrooms
Spa baths Hydrotherapy baths Shops
25NEUTRAL CURE ELASTIC SILICONE SEALANT
ARDEX ST
n E
xcellent resistance to weather, UV-radiation and commonly used
cleaning chemicals and disinfectants
n C
ontains fungicide to prevent the growth of fungi and moulds
n N
eutral cure and low odour
n M
inimises discolouration and is suitable for most surface finishes,
including natural stone
n A
vailable in Transparent and 13 colours that complement the
most popular ARDEX-FLEX Tile Grout colours
n S
uitable for wall and floor applications, both inside and outside
n S
uitable for use with underfloor heating
ARDEX ST Elastic Silicone Sealant is ideal for movement joints, corner and connecting joints in bathrooms, showers
and living areas, and doors and windows abutting tiles. Available in Transparent and 13 colours designed to match
the most popular ARDEX-FLEX Flexible Tile Grout colours. (See Grout Colour Guide on page 24).
Installation Schedule Pack Size
JOINT WIDTH: WORKING TIME: WALK ON: SKINNING TIME: COVERAGE:
30mm on walls 30 minutes After 2-3 hours 5 mins 8.6m with a
15mm on floors 6mm bead
310ml
Suitable for:
Sealing movement joints Corner joints Connecting joints
Glazed and unglazed tiles Enamel Glass
Acrylic and plastics Wood and kitchen workboards Anodised aluminium
26RENOVATION COMPOUND & LIGHTWEIGHT HIGH BUILD REPAIR MORTAR
ARDEX A 950
n Polymer
Modified Cementitious Lightweight Repair Mortar
for Internal Use
n Slump free, apply from 2mm to 100mm
n C
an receive finishes after 24 hours regardless of thickness
n Ideal for general building work, filling large cavities and deep
holes around door frames
n No priming required
n N
on-combustible – Reaction to fire Class A1 (EN 13501-1)
n Low-tension and shrinkage compensated, even in thick layers
ARDEX A 950 is a multi-purpose lightweight high build repair mortar that can be used to repair walls and floors.
ARDEX A 950 can be applied from 2mm to 100mm, and will harden in as little as 1 hour, regardless of thickness.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: DRYING TIME: COVERAGE:
2-100mm 30-40 minutes From 90 minutes 8m2 at 3mm
thick
20kg
Suitable for:
Internal floors, walls and ceilings Boxing in pipework Electrical chases
Large cavities and deep holes Making columns and pedestals
Dot and dab fixing of plasterboard Modelling architectural features
27BRILLIANT WHITE ULTRA-FINE FINISHING PLASTER
ARDEX A 826
n Ideal for ultra-fine skim coats
n One coat application
n P
aint in as little as 1 hour
n Sanding not required, can be sponge finished
n Can
also be used to fill joints between plasterboards on walls
and ceilings
n Shrinkage
compensated, will not crack or craze
n B
rilliant White
ARDEX A 826 is a brilliant white, rapid hardening, ultra-fine plaster for the smoothing and finishing of interior wall
and ceiling surfaces. ARDEX A 826 creates a true feather finish for walls and ceilings.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: SURFACE DRY: COVERAGE:
0-10mm 1 hour 1-2 hours 27m2 at 1mm per
25kg bag
25kg
Suitable for:
Finishing plaster Background for paint Wallpaper finishes
Plasterboard backgrounds Pre-rendered walls Concrete backgrounds
Aerated concrete Lightweight blocks Construction boards
28FILLING COMPOUND AND SMOOTHING PLASTER
ARDEX A 828
n Ideal
for smoothing and plastering a variety of surfaces,
such as – render, concrete, aerated concrete, plasterboard,
construction boards
n Can
be used as a deep wall filler with all the advantages of a
fast setting plaster
n Can
fill large surface depressions in walls and ceilings
n Covers
old decorative finishes such as ARTEX
n Slump,
tension and crack free
ARDEX A 828 is a brilliant white, rapid hardening, plaster for filling, smoothing and finishing interior walls and
ceilings. As a high build plaster it can be used to fill electrical chases or repair static cracks. It’s smooth consistency
also provides you with the perfect finish.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: SURFACE DRY: COVERAGE:
0-30mm 1 hour 1 hours 27m2 at 1mm per
25kg bag
25kg
Suitable for:
Finishing plaster Background for paint Wallpaper finishes
Plasterboard backgrounds Pre-rendered walls Concrete backgrounds
Aerated concrete Lightweight blocks Construction boards
29RENOVATION PLASTER
ARDEX R 1
n Ideal
for problem walls, covers ARTEX, sound wallpapers,
and paint and tiles
n Can
receive finishes in as little as 24 hours, regardless
of thickness
n Brilliant White
n Tension
and crack free
n Slump
free
ARDEX R 1 is a brilliant white, cementitious, rapid drying renovation plaster for difficult walls and ceilings. It’s ideal
for smoothing and plastering walls and ceilings in dry internal areas, prior to the application of wallpaper, paints,
dispersion based renders and other wallcoverings.
Installation Schedule Pack Size
APPLICATION DEPTH: WORKING TIME: DRYING TIME: COVERAGE:
0-50mm 30 minutes 24 hours 27m2 at 1mm per
25kg bag
25kg
5kg
Suitable for:
Covers ARTEX Old wallpaper Concrete, cement and lime renders
Plaster Plasterboards Ceramic tiles
Paints Brickwork Sound tile adhesive
30PRIMERS, BONDING CEMENT & AGGREGATES
ANCILLARY PRODUCTS
ARDEX P 51 ARDEX R 3 E
CONCENTRATED WATER-BASED PRIMER MOISTURE TOLERANT EPOXY PRIMER
& BONDING AGENT
n M
ulti-purpose – seals and n F
or use on damp surfaces
primes a wide range of
applications n C
an be sand blinded for
thicker flooring systems
n B
lue pigment allows clear
identification of primed n Solvent free
areas
n C
onvenient resealable tub
COVERAGE: COVERAGE:
Up to 160m2 Up to 24m2
per 5kg tub per 6kg tub
ARDEX P 51 is a multi-purpose primer ideal for porous ARDEX R 3 E Moisture Tolerant Epoxy Primer is a two
surfaces prior to the application of ARDEX Levelling and component solvent free epoxy resin for use on concrete
Smoothing Compounds. and cementitious surfaces that have damp surfaces (e.g.
from water spillages or rain) prior to installing ARDEX
Levelling and Smoothing Compounds .
ARDEX A 18 ARDEX AGGREGATE
SCREED BONDING CEMENT WITH FINE & COARSE AGGREGATES
COLOUR INDICATOR
n P
roduces a slurry ideal for n F
ine aggregate for sand
bonding ARDEX Screed blinding ARDEX R 3 E
Cements
n C
oarse aggregate for deep
n H
igh adhesion strength fill levelling compounds
n C
olour change reduces n Dry and pre-packed
the risk of the application
of screeds into dry
bonding slurries PACK SIZE:
COVERAGE:
11m2 at 1.5mm
per 25kg bag 25kg
When mixed with water, ARDEX A 18 produces a slurry ARDEX Aggregates are for use with ARDEX Subfloor
ideal for bonding ARDEX Screed Cements. It can also be Smoothing compounds where thicker applications
used for joining daywork joints when a new bay is laid are required, or for fully blinding epoxy primers.
against a set and hardened screed.
31MIXING BUCKETS, SPONGES & WIPES, DUST EXTRACTION
ANCILLARY PRODUCTS
ARDEX MIXING BUCKET ARDEX SPONGE
n 3
2 litre capacity n A
RDEX branded square
cut sponge for the
n R
obust design with cleaning off of ceramic
reinforced rim and tiles when grouting
handles
n Ideal for smoothing the
n Ideal for mixing surface of ARDEX repair
ARDEX smoothing and mortars
levelling compounds
and cement based
adhesives and grouts
ARDEX HEAVY DUTY WIPES ARDEX MEASURING BUCKET
n F
ormulated to remove n C
lear walled measuring
adhesives, sealants, oils, bucket with scale for use
grease and more from hands with ARDEX water-based
and tools flooring products and
n R
esealable lid ceramic
tile adhesives
ARDEX DUSTFREE
n R
educes airborne dust from
mixing with drills
n E
asy to use - fits the ARDEX
Mixing Bucket and standard
vacuum equipment
32ARDEX TECHNICAL SUPPORT
TECHNICAL ADVICE
We’re on hand to offer advice and product recommendations, in line with
British Standards codes of practice, via telephone, email, video call and our
social media channels.
SITE SUPPORT
Our highly experienced Technical Service team are available to attend your site,
offering site assessments, advice and guidance on the best use of our products
and systems for your project.
SPECIFICATION WRITING
We work closely with architects, specifiers, contractors and floorcovering
manufacturers to ensure the most suitable specification for your project. When
specifying ARDEX you can rely on our expert team for on-going support at every
stage of your project, including a rapid response to specification writing.
TECHNICAL HELPLINE - 01440 714939
The ARDEX Technical Services is available to answer any technical questions between 08:30 and
17:00 GMT Monday to Friday. Email info@ardex.co.uk.
For the latest information on ARDEX products including technical datasheets, health and safety datasheets
and product coverage calculators, please visit the ARDEX website at www.ardex.co.uk
33ARDEX TRAINING
ARDEX offer a range of flooring training and tiling courses at our purpose built Academies in Suffolk and
Stoke-on-Trent.
Training is carried out by our team of technical experts, who have extensive knowledge and practical
experience of the flooring and tiling industries which allows our courses to remain accurate and
up-to-date, covering the latest information, technological advances and industry regulations.
For training enquiries contact our National Training Manager, Steve Davies on 01440 714939 or visit
www.ardex.co.uk/training
FLOORING COURSES
REPAIR >> PROTECT >> SMOOTH & LEVEL >> INSTALL
For the perfect floor you need the perfect subfloor. Our subfloor preparation courses are a perfect blend
of theory and hands on exercises, covering everything from moisture testing through to selecting the
correct Floorcovering Adhesive.
n Subfloor
Preparation
n Subfloor
Preparation & LVT Installation
n Intermediate Subfloor Preparation
n Identification
and Preparation of an Anhydrite/Calcium Sulphate Screed
n Subfloor
Preparation & Introduction to Installing Safety Flooring in a Wet Room
TILING COURSES
WATERPROOF >> FIX >> GROUT >> FINISH
On our tiling courses you’ll develop your knowledge of the key elements associated with professional tiling
installations; from wall and floor preparation through to tile fixing and grouting.
n Systems for Professional Tiling
n Systems,
Tools & Techniques for Professional Tiling (2 Day)
n Large Format Tiling
n Pool
& Wet Leisure Tiling
n Tiling Over Anhydrite/Calcium Sulphate Screeds
34ARDEX UK SALES TEAM
National Training Manager
Steve Davies
07817 470074
Contract Managers
Vince Ruffini
07736 638536
Ian Lawton
07850 356734
Daniel Fairhurst
Morris Pate 07815 525813
07860 528824
Phillip Wilkinson
07525 812818
John Gledhill
07860 528827
Kevin Gale
07860 528829
David Clay
07860 528825
Jonathan Ardley
Gary Wheeler 07977 412477
07860 528793
John Oliver
07860 440725
Darren Wilcock
Richard Marden 07525 591484
07860 528823
Martyn Bell
07866 913608
35ARDEX UK Ltd, Homefield Road, Haverhill, Suffolk CB9 8QP
01440 714939
info@ardex.co.uk www.ardex.co.ukYou can also read
