GOBI 77 Model DEHYDRATORS FOR COAXIAL CABLES
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Dehydrators for Coaxial Cables DEHYDRATORS FOR COAXIAL CABLES Model GOBI 77 (Suitable for fully continuous and automatic operation) Dehydrators Model GOBI77 Edition: July, 2021 Page 1
Dehydrators for Coaxial Cables General Description The Dehydrators GOBI77 are automatic regeneration equipments, designed to protect coaxial cable systems with limitless capacity (suggested up to 3600 liters). Able to supply ≥ 0,58 SCFM or 990 Nl/h of dry air at a working pressure set in the range of 25 ÷ 40 kPa (other range on request min. 5 max 60 kPa). The functioning principle of automatic regeneration is based on the alternating use of two pumps and two sections of desiccant tanks. The air, taken in by the pump, is dehydrated trough the desiccant tanks and then compressed in order to have a pressure for the pressurization of the cables. By means of a pressure regulator, a safety valve and some sampling instruments as a pressure gauge, a humidity indicator, etc., the pressure is reduced and the dew point of the air inflated into the cables is under control. The Flowmeters detect in real time the status of the air leakages of the system. The automatic regeneration system is equipped with two sections, each of them containing one pump and two desiccant tank. The tanks hold a non-toxic chemical salt able to keep the humidity of the air and then to discharge it through heating. A timer manages the alternation between the two sections in order to regenerate the salts of two tanks while the other dehydrates the air. The exchange happens every three hours for only 45 minutes of heating to have always the guarantee of the dry air available. Through the restrictions for the regeneration of salts, and working in pressostatic mode, the system continues to exchange air with the cables. This air exchange allows constantly to wash the cables that might contain moisture. The equipment have two air compressors at operation alternately to guarantee a double duration and avoid the use of solenoid valves (cause of many failures). The pumps are diaphragm type, with movement to the connecting rod and rotation motor without brushes. They have a low electrical input and don’t need break-away current. These pumps are without lubrication, so there’s no risk of the pollution of the air taken in the guide. Moreover since they work at low pressure, their wear and consequently their maintenance are very limited (up to 30.000 hours). The dehydrator is equipped with a locking system pumps in the event of an abnormality of the logic of the programmer. In this way, if one of the two pumps were to suck air from the column in the regeneration phase, prevents the entry of humid air in the cables. A irreversible hours counter starts to count when the pumps are turned ON, so it shows the total real time of functioning of the pumps. Dehydrators Model GOBI77 Edition: July, 2021 Page 2
Dehydrators for Coaxial Cables Technical characteristics Technical characteristics Code GOBI77 Output Flow Rate : ≥ 0,58 SCFM or 990 Nl/h Number of outlets : 4 (3/8”) with outlet cocks each Volume capacity : 1800 liters/4h - 3600 liters/8h – 7200 liters/16h Working pressure range : 25 ÷ 40 kPa (other on request min. 5 max 60 kPa) 50 kPa during the regeneration phase Applications : Wall, Rack 19”, Rack 21” Pressure indication : Analog Pressure gauge 0 ÷ 60 kPa Leakages monitor : n°4 Flowmeters 30 ÷ 300 l/h High Humidity presence : Humidity indicator with change of salt’s color and Electronic Humidity Alarm Regeneration type : Automatic - more than 5 years before change salts Dew point : Better than – 40°C @ 20°C Tamb. e 80% R.H. Over pressure protection : Safety valve fixed at 55 kPa ± 10% Air compression : 2 diaphragm pumps with alternatively working Desiccant salts type : AA 35 Quantity desiccant salts : 2 lt total Working temperature : -10 + 40°C Storage temperature : -20 + 60°C Power supply Voltage : 230 Vac +/- 10% – 50/60 Hz Current absorption max : Normal working 0,55 A : Salts reactivation (for 45 min. every 3 hours) 1,4 A Electrical connection : IEC socket Power supply cable type : cross-section > 1 mm² designation H05VV-F or H05VVH2-F2 Analog hours counter : up to 100.000 hours not resettable Functions and alarms Functions and alarms : Led Light of dehydrator ON Lack of main supply alarm Low pressure alarm @ 22 kPa Off Manual functioning alarm when CP is switched Efficiency control : indication of pump 1 working indication of pump 2 working indication of tank 1 regenerating indication of tank 2 regenerating indication and alarm of warmer 1 broken indication and alarm of warmer 2 broken wrong cycle alarm with automatic blocking system Hygrostat electronic alarm : High humidity alarm @ > -10°C of Dew point Tele alarms type : Grouped with dry contact switch (No – C – Nc) Tele alarms connections : To the 9 poles Sub-D jack Alarms cable type : Couple cable Sizes and weight Application wall : 482 (l) x 310 (h) x 290 (p) mm Application rack 19" : 482 (l) x 310 (h) x 245 (p) mm Application rack 21” : 535 (l) x 310 (h) x 245 (p) mm Net weight MAX : 18 kg Dehydrators Model GOBI77 Edition: July, 2021 Page 3
Dehydrators for Coaxial Cables Directives CEE EEC directives : 93/68/CEE e 92/31/CEE 2002/95/EC RoHS Compliance Quality standard : Under UNI EN 29001 Installation accessories included Power connector : n° 1 IEC socket Alarms connector : n° 1 female connector with plastic case Hose PR-5 Ø10 : 25 meters Output angle adapters : n° 4 plastic L code H2291 (Dehydrator side) Quick release union elbow Ø10 : n° 4 code H22106 (Cables side) Adapter connector for 1/8” : n° 4 code H0905 AIR DIAGRAM CABLES 4 13 14 1 2 6 12 3 5 11 10 9 7 8 1) Air-inlet filters 6) Regeneration heaters 11) Electronic humidity probe 2) Desiccant thanks 7) Pressure gauge 12) Regeneration restrictions 3) Diaphragm pumps 8) Safety valve 13) Flowmeter 4) Pressure regulator 9) Pressure Control 14) Air outlet cocks 5) Logic of control 10) Humidity indicator Dehydrators Model GOBI77 Edition: July, 2021 Page 4
Dehydrators for Coaxial Cables Mounting and size Application on wall 464,5 235 310 (7U) 290 437 482,5 (19”) Rack 19" application 464,5 437 248 235 310 (7U) 40 482,5 (19”) Rack 21" application 515 437 248 250 310 (7U) 40 535 (21”) Sizes in mm Dehydrators Model GOBI77 Edition: July, 2021 Page 5
Dehydrators for Coaxial Cables Pneumatics configurations with accessories DEHYDRATOR’S AIR OUTPUT Fast insert elbow code H2291 HOSE PR-5 Code M0331 Adapter for connectors of 1/8” code H0905 Quick release union: - elbow 90° code H22106 - in-line code H2229 (optional) Dehydrators Model GOBI77 Edition: July, 2021 Page 6
Dehydrators for Coaxial Cables PR-5 HOSE FOR THE TRANSPORT OF DESICCATED AIR TUBO PR-5 PER IL TRASPORTO DI ARIA ESSICCATA Data sheet Rev. March, 2009 Denominazione / Name .............................. : PR-5 Designazione / Uses ................................... : Trasporto di aria essiccata per la protezione di Guide d’Onda e Cavi coassiali. Transport of desiccated air for protection of Wave Guides and Coaxial Cables. Campo di applicazione / Applications note . : Idoneo per tutti gli agenti atmosferici Suitable for every atmospheric agent Grado di impermeabilità .............................. ............................... [°C di P.d.R ogni 10 m] : < 2 @ 20°C Tamb. & 80% U.R. Impermeability degree .................................. ....................... [°C of Dew point each 10 m] : < 2 @ 20°C Amb. Temp. & 80% R.H. Dimensioni / Dimensions .................... [mm] : est. Ø 10 – int. Ø 8 Tolleranza / Tollerance ..................... [mm] : ± 0,07 sul Ø est / on outside Ø Peso / Weight .................................... [g/m] : 26,06 Tolleranza / Tollerance ......................... [%] : ± 0,5 sul peso / on the weight Raggio minimo di curvatura ................[cm] : 6,0 Minimum Radius of curvature Pressione di esercizio max ................ [bar] : 7,0 @ 20°C Working pressure max Resistenza allo scoppio ...................... [bar] : 21,0 @20°C ÷ 12,0 @ 60°C Burst pressure Allungamento a rottura ......................... [%] : 400 ÷ 600 Tension at straight ........................................ Temperatura di funzionamento ........... [°C] : - 40 ÷ + 60 Temperature range Temperatura di installazione ............... [°C] : - 10 ÷ + 60 Installation temperature range Durezza / Hardness..................... [Shore D] : 46 Colorazione / Colors .................................. : Nero / Black Confezioni standard / standard packaging [m]: 50 – 100 – 200 - 500 Proteggere da /Protect to: Acquaragia – Ammoniaca – Benzene – Benzolo – Carburante per jet – Cloroformio – Etere – Etile cloruro e dicloruro – Fluoro – Freon 12/22 – Idrogeno – Metiletilchetone – Metile e Metilene cloruro - Nafta – Olio combustibile – Olio lubrificante – Olio minerale – Ozono – Petrolio – Sodio ipoclorito – Solforico acido. Code M0331 Dehydrators Model GOBI77 Edition: July, 2021 Page 7
You can also read