Disposable and Chemical Protective Clothing - Lakeland
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
LAKELAND DISPOSABLE / CHEMICAL PPE
Disposable
and Chemical
Protective
Clothing
MicroMax® VP
Bloodborne Pathogen and
Chemical Protection all in one garment!
Page 4
CleanMax®
Cleanroom Apparel - available in Clean
Manufactured Non-Sterile or
Clean Manufactured Sterile versions
Page 6
MicroMax® NS Vend Packs!
Ideally packaged for vending, retail,
response kits and single use applications
Page 16
PermaSURE®
Mobile-friendly online tool that models
permeation rates and safe-use times for
over 4,000 chemicals
Page 34
1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com
LAKELAND DISPOSABLE / CHEMICAL PPE
CONTENT
Disposable Clothing Chemical Clothing
4 MICROMAX® VP 24 CHEMMAX® 1
Bloodborne Pathogen and Chemical Protection Your First Level of Chemical Protection
6 CLEANMAX® 26 CHEMMAX® 2 4 MICROMAX® VP
Cleanroom apparel – Clean Manufactured Quality, Value, Durability with the Proven
Non-Sterile or Clean Manufactured Sterile Protection of Saranex® 23P Barrier Film
configurations
38 CHEMMAX® 3
16 MICROMAX® NS Advanced Chemical Protection for Industry,
Microporous protection from dirt, grease, Emergency Response and Law Enforcement
grime and light chemical splash!
40 CHEMMAX® 4 PLUS
18 MICROMAX® NS COOL SUIT
Breathable back panel maximizes comfort!
Superior, Advanced Chemical Protection.
Now Supported by PermaSURE®
6 CLEANMAX®
20 MICROMAX® 42 INTERCEPTOR® PLUS
Added durability for the toughest First Line Defense Against Extreme Chemical
environments Hazards. Now Supported by PermaSURE®
21 SafeGard™ 45 COOLVEST™
Lightweight, breathable protection Chemical Suit Cooling Vest
from 3 tough layers
22 SafeGard™ ECONOMY FR Disposable Clothing
40 CHEMMAX® 4 PLUS
34 PERMASURE®
SafeGard Protection - Economical Design
29 PYROLON® PLUS 2
23 ZONEGARD® Perfect for use over thermally protective and
Breathable, Lightweight Protection arc protective clothing!
of Polypropylene
30 PYROLON® CRFR
Chemical Resistance and Flame Resistance in
one Disposable Protective Garment
32 PYROLON® CBFR
PROTECTING WORKING
Advanced Chemical Barrier and Flame
Lakeland® Industries is a global
Resistance for the Highest Chemical Hold-Out
manufacturer of personal protective
equipment, specializing in Disposable
Resources
PROFESSIONALS
and Chemical Protective Apparel,
FR/AR Clothing and Protective Gear for
2 Lakeland® World-Class Sales and Support
Note that it is up to the First Responders.
9 Tips for Cleanroom Apparel Selection professionals responding
SINCE 1982
10 Sizing Guide and Critical Protection Data For over 35 years Lakeland® has provided
to any industrial or viral
11 Lakeland Brand Product Range Overview products to the working professionals
environment to do a thorough
in Electric and Gas Utilities, the Oil and
12 Protection Levels and Seam Styles hazard assessment based on
Gas Industry, General Manufacturing,
14 Apparel Selection Guide the task to be performed and
Public Safety and the Petrochemical
28 Disposable FR Guide determine the complete PPE
sectors, keeping workers both safe and
ensemble for the hazard(s)
34 PermaSURE® – Mobile-friendly on-line tool that models permeation rates! comfortable on the job.
they will face.
44 Chemical Suit Options and Accessories
1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 1
LAKELAND DISPOSABLE / CHEMICAL PPE
World-Class Sales and Support – all around the globe
At Lakeland® Industries, our number one priority is creating protective garments that protect
your people from hazardous particulates, liquids and chemicals, blood, diseases, and even fire
and arc flash. Throughout the world, Lakeland® products Protect Your People®.
It’s what we do.
Headquartered in Ronkonkoma, New York, since 1982, and supported by a global team in
over 18 countries around the world, you can trust our experience, our expertise, and most
importantly, our proven track record of developing and delivering superior garments that
provide the protection and performance you require on the job, every day.
Lakeland’s customers worldwide have access to nearly 4 decades of our expertise developing
and supplying products to the Oil and Gas, Petrochemical, Utility, Wind Energy, Healthcare,
Cleanroom and hundreds of other Industries around the globe.
Lakeland’s Team of Global Experts are ready to assist. Any application. Anywhere. Global Manufacturing and Design - supporting a worldwide customer network
Lakeland® Industries’ products have established and maintained a global reputation for overall
EUROPE
CHINA quality and are recognized as the industry’s gold standard. We design and manufacture a wide
variety of technologically advanced protective clothing in our factories around the world.
NEW YORK RUSSIA
CANADA
VIETNAM
With manufacturing facilities in the United States, Mexico, China, Vietnam and India, Lakeland®
is well positioned to source leading edge materials and produce the most advanced garments
ALABAMA
INDIA available to any region of the globe.
AUSTRAILIA
MEXICO
Lakeland’s use of advanced technology doesn’t stop with product development and design.
Lakeland’s customers have access to leading edge data and information to assist with proper
product selection, calculate safe-use times and even model the effects of environmental
changes and how they influence chemical permeation rates.
ARGENTINA
We Design, We Develop, We Manufacture, and We Deliver.
CHILE
All to Protect Your People®
2 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 3
LAKELAND DISPOSABLE / CHEMICAL PPE
MicroMax® VP Applications
Crime Scene Cleanup
MicroMax® VP - Premium Protection from High-Risk Contaminants!
Research Laboratories
MICROMAX VP ® Emergency Medical
Response
Embalming / Forensics Protective hood
Bloodborne Pathogen and
Chemical Protection
Serged Seam
Seamless front reduces the risk
of possible contamination from
liquid penetration
Taped storm flap keeps
contaminants away from zipper
Passes ASTM F1670/F1671 and
Passes ASTM D6978 Fentanyl Elastic back gives a more
comfortable fit and helps
prevent rip-outs
MicroMax®VP is specifically designed to protect when the risk • Protective hood
of blood, body fluids, bloodborne pathogens and viral contam- • Seamless front reduces risk of contaminant exposure
ination are the greatest. Ideal for use in crime labs, crime scene • Taped storm flap protects zipper
MicroMax® VP Configurations
clean up and by emergency response personnel. • Elastic back for more comfortable fit
• Passes ASTM F1670/F1671 for Blood and Viral Protection
MicroMax® VP Fabric Physical Properties MicroMax® VP Fabric Liquid Penetration Data
Physical Property Test Method Units Test Results Physical Property Test Method Test Results
Material Thickness ASTM D1777 15 mil Liquid Penetration Using Synthetic ASTM F1670 Pass
Blood
Material Weight ASTM D3776 80 gsm Viral Penetration using фX174 ASTM F1671 Pass
bacteriophage suspension
Tensile Strength MD ASTM D5034 lbs. 36.30 lbs.
Tensile Strength CD ASTM D5034 lbs. 24.15 lbs. MicroMax® VP Fabric ASTM F903 Coverall Coverall
Liquid Penetration Data MVP414 MVP428
Elongation MD ASTM D5034 % 59 Avg.
• Zipper closure • Zipper closure
Physical Property Test Method Test Results • Attached hood • Attached hood
Elongation CD ASTM D5034 % 71 Avg.
Methanol ASTM F903 Pass • Boots • Elastic wrists
16 g/sq. • Elastic wrists • Elastic ankles
Water Vapor Transmis- Ethyl Acetate ASTM F903 Pass
ASTM E96 meter/ 24 hrs. Sizes: S – 5X Sizes: S – 5X
sion Rate avg. Case Pack: 25 Case Pack: 25
Sulfuric Acid (97%) ASTM F903 Pass
Bursting Strength ISO 13938-1 29.4 psi avg. Tetrahydrofuran ASTM F903 Pass
Hydraulic Method
CPSC16 CFR Sodium Hydroxide ASTM F903 Pass
Burn Test 45° Pass
1610 Acetone ASTM F903 Pass
Surface Resistance The test Hydrofluoric Acid ASTM F903 Pass Available with attached
sample
Requirement for BS EN1149 Ω meets the Acetonitrile ASTM F903 Pass
boots to help prevent cross-
EN1149-5:2008 is ≤2.5
x 10⁹ Ω. requirement contamination during an event
2.4 X 10⁸
For Fentanyl Test Results using ASTM D6978 refer to page 10
4 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 5
LAKELAND DISPOSABLE / CHEMICAL PPE
CleanMax® Applications Lakeland® Industries has spent over 30 years being an industry leader protecting
Cleanrooms
people in the workplace and now we’ve extended our expertise to protect both
your people and your cleanroom and/or controlled environment. CleanMax® is
Does Your Cleanroom
Pharmaceutical a high-quality microporous laminate material that is lightweight and breathable Apparel Meet Current
CLEANMAX ® IEST Standards?
Compounding but is impervious to liquids, harsh chemicals and microorganisms.
Both CleanMax® Clean Manufactured Non-Sterile and CleanMax® Clean
Manufactured Sterile meet IEST-RP-C003 Category I particulate cleanliness
Read our whitepaper and
Cleanroom Apparel standards and are ready for immediate use in ISO Class 4 – 8 Cleanrooms. All find out...
Bound Seam sterile garments are gamma radiation sterilized to a level of 10-6 SAL (Sterility
Assurance Level) . These garments
provide excellent comfort as well as
protection, so you can easily don
EN ISO 13982-1 EN 13034 EN 1073-2:2002 EN 14126:2003
and doff your garments to reduce
:2004 +A1:2010 :2005 +A1:2009 TIL = Class 1 (Type 5B, 6B)
excursions and risk of contamination.
lakeland.com/us/cleanroom-whitepaper
Clean Sterile Garments and
Packaging
CleanMax® Clean Manufactured Sterile
garments are sterile to a sterility assurance
level of 10-6 SAL, and are compatible
with ISO Class 4-8 Cleanrooms and all
Controlled Environments
Available in Clean Manufactured Non-Sterile or
Clean Manufactured Sterile configurations
STERILE R Irradiation
CleanMax® Configurations
Sterilization
All Lakeland® CleanMax® Apparel is: CleanMax® Fabric Physical Properties
• IEST-RP-CC003 Category I Particle Cleanliness Physical Property Test Method Units Results
• Latex and Silicone Free Basis Weight ASTM D3776 oz/y2 1.55 oz/y2
• Compatible with ISO Class 4 -8 Cleanrooms and all Grab Tensile MD ASTM D5034 lbs. 22.0 lbs.
Controlled Environments
Grab Tensile XD ASTM D5034 lbs. 14.0 lbs.
• Individually packaged and protective outer bag for ante areas CTL191 CTL417 CTL428 CTL713 CTL903 CTL850
Trapezoidal Tear MD ASTM D1117 lbs. 9.0 lbs.
• Resistant to blood and body fluid penetration
Trapezoidal Tear CD ASTM D1117 lbs. 5.8 lbs.
• Resistant to viral penetration Clean Manufactured Non-Sterile Garments
• Resistant to Blood Borne Pathogens Ball Burst ASTM D3787 lbs. 19.0 lbs.
Frock – CTL191CM Coverall – Coverall – Hood – CTL713CM Boot Cover – Sleeve
• Chemical Penetration Resistance to oils, bleach and Air Permeability ASTM D737 cfm
LAKELAND DISPOSABLE / CHEMICAL PPE
CleanMax® Features and Benefits Disposable Cleanroom Suits: Tips for Cleanroom Apparel Selection
Clean Manufactured Garments All bound seams Confidence in your cleanroom starts with understanding how Applications for CleanMax® Cleanroom Apparel
to select the right disposable apparel for your unique needs. CleanMax® Clean Manufactured Sterile
Garments that are clean man- CleanMax® garments feature Part of the benefit of working with Lakeland® is ongoing access • Aseptic or Terminally Sterile Cleanroom Environments
ufactured offer significantly bound seams, which are precise- to our team of cleanroom industry experts. In just a few min- • ISO Class 4-8 Cleanroom
less particle counts in contrast ly sewn with an additional outer utes, we will work with you to determine the type of garment • Sterility assurance level of 10-6 SAL
to garments that are not clean binding. This increases seam required for your application and environment, and discuss how
manufactured. strength and provides a better CleanMax® Clean Manufactured Non-Sterile
we can help you protect your team effectively with clean-manu-
barrier from break through and • ISO Class 4-8 or below Non-Aseptic Cleanrooms or
Smooth Storm Flap for Added factured garments. Controlled Environments
Level of Protection protection from strike through
Very few disposable cleanroom than simple serged seams. Garment Configurations
garments have the added ISO 5
Smooth surface area prevents ISO 5
protection of a placket storm particles from sticking Apparel ISO 8 ISO 7 ISO 6 Sterile ISO 4 ISO 3 ISO 1 & 2
Non-Sterile (Aseptic)
flap. Covering the zipper further CleanMax® garments are Hair cover R R R R R R R AS
protects the critical chest and smoother than other leading Barrier gloves AS AS AS AS R R R R
front area of the garment from brands, which means particu- Facial cover AS AS AS R R R R AS
potential particulate break- lates are less likely to harbor on Hood AS AS AS R R R R AS
through. Additionally, our storm the garment surface. Frock R R AS AS NR NR NR NR
flap has finished seams so there
Coverall AS AS R R R R R R
are no exposed raw edges. Cuffed ankle allows for six
inches of freedom Shoe cover R R AS AS NR NR NR NR
Thumb Loops Expertly folded to reduce surface Boot AS AS R R R R R R
Plastic wrists with thumb loops contamination during the don- Typical
Frequency of 2X/week 2X/week 3X/week 1X/day Per Entry Per Entry Per Entry Per Entry
help secure the coveralls and ning process, the cuffed ankle Change*
frocks in place to prevent the provides six inches of freedom Chart shows Lakeland® garments relevant to ISO 5. Recommendations from IEST-RP-CC003.
potential exposure of skin while when you are stepping into the R = Recommended, NR = Not Recommended, AS = Application Specific
worn during normal activities. gown
CleanMax® vs. Reusables: Which is Better?
Chemical Penetration
Resistance Each time a cleanroom garment is handled, a chance for contamination occurs. A reusable garment goes through multiple steps in
CleanMax® offers chemical the laundering process leading to greater risk of contamination.
penetration resistance to oils,
bleach and 50 percent sodium Initial Initial
hydroxide. Manufacturing Manufacturing
Premium Packaging Means Cleanroom
Sterilize Worker
Less Wrinkles, Less excursions Uses Garment
Garments are individually
CleanMax® Reusables
2 7
packaged and expertly folded
to prevent excessive wrinkling Download our FREE
STEPS STEPS
Repackage - Transport with
and the potential for increased Disposable Cleanroom potential for soiled garments
cross
excursions. Garment Guide! contamination
from other
companies
Cleanroom
Disposal Worker
Get the added safety of Uses Garment
Launder -
CleanMax®, which offers potential for
cross
Inspection
resistance to blood and contamination Sort -
Repair if
necessary
body fluid penetration,
viral penetration and lakeland.com/us/cleanroom-guide Choose Lakeland® CleanMax® and feel secure in your investment in your most critical assets;
bloodborne pathogens! your people, your controlled environment and your product
8 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 9
LAKELAND DISPOSABLE / CHEMICAL PPE
Lakeland® Brand Disposable/Chemical Sizing Guide Lakeland® Brand Product Range Overview
7’0”
6’6”
6’
Interceptor® Plus Interceptor® Plus achieves the highest levels of chemical protection required for extremely
hazardous areas, including Level A HazMat response. All supported by PermaSURE.
5’6”
5’
4’6”
ChemMax® 4 Plus ChemMax® 4 Plus fabric incorporates a 6 layer protective barrier system and is supported by the
PermaSURE Toxicity Risk Modeler Software Application.
CHEMICAL PROTECTION
4’
3’6”
3’
ChemMax® 3 barrier film is soft and durable while providing superior protection from both
2’6”
ChemMax® 3 chemicals and chemical warfare agents, all while backed by the PermaSURE database of
4,000+ chemicals.
2’
S M L XL 2XL 3XL 4XL 5XL
ChemMax® 2 ChemMax® 2 fabric is built with the proven protection of Saranex 23P barrier film to provide
superior and economical chemical protection.
Height: Up to 5’6” Up to 5’7” Up to 5’9” Up to 6’0” Up to 6’3” Up to 6’5” Up to 6’7” Up to 6’9”
Weight: Up to 110 lbs Up to 130 lbs Up to 150 lbs Up to 180 lbs Up to 220 lbs Up to 250 lbs Up to 280 lbs Up to 320 lbs
ChemMax® 1 fabric is comprised of a polyethylene (PE) barrier film and a continuous filament
The above chart is a suggested guide for garment selection. Proper fit varies with individual body shape and allowances should be made for clothing that ChemMax® 1 polypropylene nonwoven fabric. Lightweight and durable protection for most industrial acid
and base chemicals.
will be worn underneath the garment. Always choose the larger size should you fall in between the suggested guidelines or are uncertain on which
size to select.
Critical Protection - Tested Performance
FLAME RESISTANT PROTECTION
Hazard Type Lakeland® Brand Test Method Test Results
Pyrolon® CBFR Pyrolon® CBFR offers the highest level of chemical protection for harsh environments that also
require Flame Resistant apparel due to flash fire concerns.
ISO 16604:2004 Protection against Blood Pass Class 6 (Maximum Level)
and Body Fluids
Blood and Infectious Agent MicroMax® NS
ISO 22611:2003 Protection against
Biologically Contaminated Aerosols Pass Class 3 (Maximum Level)
Pyrolon® CRFR Pyrolon® CRFR fabric utilizes a 2.5 mil proprietary FR barrier film to provide chemical
protection for primary FR/AR garments that won’t melt or drip in a flash fire scenario.
ASTM F1670 Liquid Penetration to Synthetic
MicroMax® NS Pass
Blood
Bloodborne Pathogens
MicroMax® VP ASTM F1671 Viral Penetration фX174 Pass
Bacteriophage Suspension
Pyrolon® Plus 2 provides highly breathable, secondary FR protection, to keep primary FR/AR
Pesticide Protection MicroMax® NS ASTM F903 Penetration Testing –
Diazinon (Roundup) Pass Pyrolon® Plus 2 garments free from contamination by dirt, grease, oil, hydraulic fluid and other dry particulate,
aerosol and light liquid hazards.
Isocyanate Based Paint MicroMax® NS ASTM F903 Penetration Testing Pass
Ammonia – 99% Anhydrous Gas Pyrolon® CBFR ASTM F739 Permeation Testing >480 minutes
(CAS Number 7664-41-7) MicroMax®VP garments are specifically tailored for protection from the risk of blood, body fluids
MicroMax® VP and bloodborne pathogens. ASTM F1670/F1671 for blood and viral and designed with no
Fentanyl - Testing per ASTM D6978 exposed seams or points for liquid penetration on the forward-facing portion of the garment.
Minimum
DISPOSABLE PROTECTION
Steady State
Breakthrough The MicroMax® family of fabrics are all based upon a spunbond polypropylene layer with a
Test Drug and Permeation Rate
Lakeland® Brand Detection Time Other Observations
Concentration (Specimen 1/2/3)
(Minutes)
(Specimen 1/2/3)
(µg/cm2/minute) MicroMax® laminated microporous film. Dry particulate filtration to 1.0 micron and passes ASTM F1670/F1671
for bloodborne pathogens make the MicroMax line ideal choice blood, grease, paint, pesticides
and light chemical splash.
Fentanyl Citrate Slight swelling;
MicroMax® VP* >240 NA
Injection, 100 mcg/2mL no degradation
Fentanyl Citrate Slight swelling; SafeGard™ fabric is a layering of Spunbond-Meltblown-Spunbond polypropylene filaments to
ChemMax® 1** >240 NA
Injection, 100 mcg/2mL no degradation
SafeGard™ provide breathable protection against aerosols and light liquids, as well as particle filtration
down to 10.0 microns.
* MicroMax® VP fabric holds out liquid Fentanyl, but is only recommended for Fentanyl in powder form due to serged seam construction
** ChemMax® 1 has >240 min hold out for liquid Fentanyl; Taped/Sealed Seam Garments are recommended for Fentanyl in liquid form
Users should also ensure the gloves they are using for chemotherapy have been tested against the most recent standards. The current standard for exam gloves used in
chemotherapy is ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs.
Prior to ASTM D6978-05 many exam gloves were tested against ASTM F739 “Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of
Continuous Contact”. ASTM D6978-05 uses ASTM F739 as a test method, but has a chemical permeation requirement that is 10 times more stringent than what is required by ASTM
ZoneGard® ZoneGard® fabric is lightweight, highly breathable polypropylene fabric. Ideal protection for dirt,
dust and other dry particulates.
F739. Users of gloves tested under ASTM D6978-05 have a higher level of confidence that the gloves they are using are tested to the current, more stringent ASTM standard.”
10 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 11
LAKELAND DISPOSABLE / CHEMICAL PPE
Lakeland® Brand Protection Levels and Seam Styles
General Protection Aerosol/Spray Chemical Splash Hazmat Critical Environment / Biohazard
Product Hazardous Non- Welding, Non- Paint, Low High
Applications Dirt, Oil and Dry Hazardous Cutting and Hazardous Hazardous Dry Particles Flammable Exposure, Exposure, Flammable Hazmat, Hazmat Paint Booth Bloodborne Waste Water Flash Fire Clean Room
Grease Environment Liquids Maritime Non-Certified Pathogens Treatment Chemical
Particulate Liquids Grinding Liquids Liquids Low Risk High Risk
MicroMax® NS l l l l l l l l l l
MicroMax® NS Cool Suit l l l l l l l
MicroMax® l l l l l l l l l l
MicroMax® VP l l
CleanMax® l
SafeGard™ SMS l l l l l l
Economy SMS l l l l l
Pyolon® Plus 2 * l l l l l l l
ZoneGard® Polypropylene l l
Pyrolon® CRFR * l l l l l l l l l l
Pyrolon® CBFR l l l l l l l l
ChemMax® 1 l l l l l l l l l l l
ChemMax® 2 l l l l l l l l l
ChemMax® 3 l l l l l l
ChemMax® 4 Plus l l l
Interceptor® Plus** l l l l
* Must be worn over thermally protective clothing, such as flame resistant cottons, aramids or mono acrylics.
** Interceptor meets the requirements of NFPA 1991 limited flash fire for escape only option.
Product Seam Availability The Seam You Choose is
Product Serged Seam Bound
Seams
Heat Sealed
Seams
Heat Sealed
Plus Seams Determined By
MicroMax® NS
MicroMax® NS Cool Suit
l
l
Your Work Environment Serged Seam Bound Seam Heat Sealed Seam Heat Sealed Plus Seam
MicroMax®
MicroMax® VP
l
and Your Potential Risk Low Risk of
Hazardous Exposure
Moderate Risk of
Hazardous Exposure
High Risk of
Hazardous Exposure
Maximum Risk of
Hazardous Exposure
of Hazard Exposure!
l
CleanMax® l
SafeGard™ SMS l
Economy SMS l
Pyolon® Plus 2 l
ZoneGard® Polypropylene l
Pyrolon® CRFR l
Pyrolon® CBFR l A serged seam joins two pieces A bound seam joins two pieces A heat sealed seam is sewn This is the ultimate and
of material with a thread that of material with an overlay of and then sealed with a heat strongest seam that Lakeland®
ChemMax® 1 l l l interlocks. This is an economical similar material and is chain activated tape. This method offers. The seam is sewn
ChemMax® 2 l l stitching method for general stitched through all layers provides liquid proof seams, and then heat sealed on the
applications. This stitching for a clean finished edge. This and is especially useful for Level outside and inside to offer the
ChemMax® 3 l
method is generally not used provides increased holdout of A and B chemical protective highest strength and chemical
ChemMax® 4 Plus l for chemical protective clothing. liquids and dry particulates. clothing. resistance.
Interceptor® Plus l l It is more commonly found on
disposable clothing where dry
particulates are a concern.
12 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 13
LAKELAND DISPOSABLE / CHEMICAL PPE
Lakeland® Brand Apparel Selection Guide
ISO 16602
> 1micron Type 5 – SafeGard™ SMS
SafeGard™ SMS
Page 21 What does garment “Type”
Hazardous
stand for?
Is the particle size MicroMax® NS
Dry greater or less No Type 5 – MicroMax® NS
Page 16 The ISO 16602 standard is based upon
Particles than 1.0 micron? Does the application a system of Types and Classes. The
< 1 micron require a greater
comfort level? MicroMax® NS garment “Type” designation is based upon
Yes Type 5 – MicroMax® NS Cool Suit Cool Suit
the physical state of the hazard.
Page 18
LOWEST
PROTECTION
Limited protection
Infectious Is the hazard a blood-borne pathogen,
biologically contaminated aerosol,
Type 6 and Type 5 –
MicroMax® VP, MicroMax® NS
MicroMax® VP MicroMax® NS MicroMax® against liquid mist
Agents dry microbial or body fluid? and MicroMax®
Page 4 Page 18 Page 20
Type 6 – SafeGard™ SMS, MicroMax® NS Protection
SafeGard™ SMS MicroMax® NS ChemMax® 1 ChemMax® 2
Aerosol MicroMax® NS/ NS Cool Suit, Cool Suit against airborne
Page 21 Page 16 Page 24 Page 26
Is the liquid an aerosol ChemMax® 1 and ChemMax® 2*** Page 18 solid particulate
Low or spray? chemicals
Liquid Is the exposure level Spray Type 4* – (sealed seam products) ChemMax® 1 ChemMax® 2
Light
Hazards low or high? ChemMax® 1 and ChemMax® 2 Page 24 Page 26
Is protection required
High from light or heavy splash? Type 3* – (sealed seam products) ChemMax® 4
ChemMax® 1 ChemMax® 2 ChemMax® 3
Heavy ChemMax® 1, ChemMax® 2,
Page 24 Page 26 Page 38
Plus
Protection against
ChemMax® 3 and ChemMax® 4 Plus Page 40
liquid aerosols
We recommend garments
No made of FR Cotton or
FR Aramid fabric
Is there a dry Protection against
No particle hazard?
Pyrolon® pressurized liquid
Yes Type 5 – Pyrolon® Plus 2** Plus 2 chemicals
Flash Fire/ In addition to Flash Fire, Page 29
Chemical do you need chemical
Hazards protection from liquid spray? Pyrolon®
Liquid Spray Type 6 – Pyrolon® Plus 2** Plus 2
Page 29
Is the liquid a liquid spray
Yes or liquid splash? Non gas-tight
Type 4* and Type 3* – Pyrolon® CRFR Pyrolon® CBFR protection
Liquid Splash Pyrolon® CRFR, Pyrolon® CBFR** Page 30 Page 32
Does your application Gas-tight protection
Gas/Vapor require an air-tight
Type 1
Interceptor® Plus, EPA Level A
Interceptor®
Plus against chemicals
Gas-Tight Suit
Hazards positive pressure suit? Designation Page 42 and vapors and toxic
particles HIGHEST
PROTECTION
* For details on Type 4 and Type 3 solutions, contact your Lakeland® Sales Representative or call Customer Service at 800-645-9291. This is a general guide to selecting garments only and should not be used as the definitive or only tool in garment selection. It is the responsibility of the user to select garments or
** Must be worn over thermally protective clothing, such as fire resistant cottons, aramids or modacrylics. products which are appropriate for each intended use and which meet all specified government and industry standards.
*** Refer to permeation data for which ChemMax® is indicated for a given hazard.
14 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 15
LAKELAND DISPOSABLE / CHEMICAL PPE
MICROMAX NS ® MicroMax® NS MicroMax® NS Configurations
Applications
Light Chemical Handling
Microporous protection from Sandblasting/Abrasives
dirt, grease, grime and light Dirt, Oil and Grease
chemical splash!
Serged Seam
Lab Coat Lab Coat Lab Coat Lab Coat Frock Frock Shirt Pants
CTL101 CTL104 CTL112 CTL140 CTL190 CTL191 CTL201 CTL301
• Snap closure • Snap closure • Snap closure • Snap closure • Mandarin collar • Mandarin collar • Snap closure • Elastic waist
• 2 pockets • 2 pockets • No pockets • No pockets • 5 snaps • Zipper closure • Long sleeves Sizes: S – 5X
• Long sleeve • Long sleeve • Long sleeve • Long sleeves • No pockets • No pockets Sizes: S – 5X Case Pack: 50
Sizes: S – 5X • Elastic wrists • Elastic wrists Sizes: S – 5X • Elastic wrists • Elastic wrists Case Pack: 50
Case Pack: 30 Sizes: S – 5X Sizes: S – 5X Case Pack: 30 Sizes: S – 5X Sizes: S – 5X
Case Pack: 30 Case Pack: 30 Case Pack: 30 Case Pack: 25
MicroMax® NS Features: MicroMax® NS Fabric Physical Properties
Coverall Coverall Coverall Coverall Apron Apron
• Economical Physical Property Test Method Units Test Results CTL412 CTL414 CTL417 CTL428 CTL601 CTL603
• Lightweight Basis Weight ASTM D3776 oz/y2 1.55 oz/y2 • Zipper closure • Zipper closure • Zipper closure • Zipper closure • Sewn ties • Sewn ties
Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood Sizes: 28”w x 36” l Sizes: 28”w x 44”l
• Features high MVTR (Moisture Vapor Transmission Rate) Grab Tensile MD ASTM D5034 lbs. 22.0 lbs. Case Pack: 25 • Boots • Elastic ankles • Elastic wrists Case Pack: 100 Case Pack: 100
• Protection from dry particulates and light liquid splash Elastic wrists Sizes: S – 5X • Elastic ankles
Grab Tensile XD ASTM D5034 lbs. 14.0 lbs.
Sizes: S – 5X Case Pack: 25 Sizes: S – 5X
Trapezoidal Tear MD ASTM D1117 lbs. 9.0 lbs. Case Pack: 25 Case Pack: 25
Trapezoidal Tear CD ASTM D1117 lbs. 5.8 lbs.
Ball Burst ASTM D3787 lbs. 19.0 lbs.
Air Permeability ASTM D737 cfmLAKELAND DISPOSABLE / CHEMICAL PPE
MICROMAX NS ® MicroMax® NS Cool Suit
Applications MicroMax® NS Cool Suit ... All-In-One Protection and Comfort!
COOL SUIT
Paint Spray
Sandblasting/Abrasives
Power Washing Protective hood
Breathable back panel
maximizes comfort!
Front and sides composed
of microporous film SMS
Serged Seam over a polypropylene Barrier
substrate provides barrier
protection
Storm flap over zipper
protects against splashes
SMS back panel increases
breathability and
particulate barrier
Elastic back waist
provides improved
comfort
MicroMax® NS Cool Suit Features:
MicroMax® NS Cool Suit Configurations
• SMS back panel increases breathablity and and provides a
barrier to particulates and aerosol mist
• Elastic back waist provides improved comfort
• Front and sides material provides protection from dirt, liquids
and light chemical splash
• Storm flap over zipper protects against splashes
Attached hood fits perfectly around MicroMax® NS Cool Suit Fabric Physical Properties MicroMax® NS Cool Suit Fabric
most respirators ASTM F903 Penetration Data
Physical Property Test Method Units Test Results
Basis Weight ASTM D3776 oz/y2 1.85 oz/y2 Chemical Tested Concentra- Test Test
Breathable back panel material tion % Time – Results
keeps you cool
Coverall Coverall Strip Tensile MD ASTM D5035 lbs. 11.3 lbs. Minutes
COL412 COL428 Strip Tensile XD ASTM D5035 lbs. 6 lbs. Diazinon (Roundup) 100% 60 Pass
• Zipper closure • Zipper closure
MicroMax® NS Cool Suit Sizes: S – 5X
Case Pack: 25
• Attached hood
• Elastic wrists
Tensile Strength MD ASTM D5034 lbs. 24.4 lbs. Motor Oil-40 wt. 100% 60 Pass
is the perfect solution for • Elastic ankles
Sizes: S – 5X
Tensile Strength XD
Trap/Tear MD
ASTM D5034
ASTM D1117
lbs.
lbs.
16.2 lbs.
10.8 lbs.
Bleach-household 100% 60 Pass
spray applications!
Isocyanate Based Paint 100% 60 Pass
Case Pack: 25 Trap/Tear XD ASTM D1117 lbs. 5.4 lbs. Sodium Hydroxide 50% 60 Pass
Ball Burst ASTM 3787 lbs. 25.1 lbs. Sodium Hypochlorite 10% 60 Pass
Taber Abrasion ASTM 3884 cycles 1062 cycles Blood Challenge Fluid Assay Pass
Liter – 3.20 x Results
Elastic cuffs on sleeves and ankles helps Mocon-Breathability 5031 108 (PFU/mL) PFU/mL
seal out spray-over The Cool Suit breathable back panel provides Air Permeability ASTM D737 cfm/ft2LAKELAND DISPOSABLE / CHEMICAL PPE
MICROMAX ® MicroMax® Applications
Dirt, Oil and Grease SafeGard ™ SafeGard™ Applications
Dirt, Oil and Grease
Added durability for the Hazardous Dry Particulate Lightweight, breathable protection Aerosol Mist
toughest environments Non-hazardous Liquids from 3 tough layers
Serged Seam Serged Seam
MicroMax® Features: MicroMax® Fabric Physical Properties SafeGard™ Features: SafeGard™ Fabric Physical Properties
• Rip-stop nylon scrim adds strength and durability Physical Property Test Method Units Test Results • Deluxe pattern coveralls feature Physical Property Test Method Units Test Results
• Liquid under pressure will not pass through fabric Basis Weight ASTM D3776 oz/y2 2.10 oz/y2 – hip pocket Basis Weight ASTM D3776 oz/y2 1.5 oz/y2
• Ideal for Isocyanate paint Grab Tensile MD ASTM D5034 lbs. 32.4 lbs. – chest pocket Grab Tensile MD ASTM D5034 lbs. 25 lbs.
• Proven protection for Pesticide Spraying Grab Tensile XD ASTM D5034 lbs. 32.6 lbs. – elastic back Grab Tensile XD ASTM D5034 lbs. 20 lbs.
Trapezoidal Tear MD ASTM D5733 lbs. 5.1 lbs. • Aerosol mist protection Trap Tear MD ASTM D5733 lbs. 7.9 lbs.
Trapezoidal Tear CD ASTM D5733 lbs. 6.2 lbs. • Ideal for dry particulate Trap Tear XD ASTM D5733 lbs. 6.7 lbs.
Surface Resistance EN1149 Ω Pass • Breathable Protection
MicroMax® Configurations MicroMax® Fabric ASTM F903 Penetration Data SafeGard™ Configurations
Chemical Tested Concentra- Test Test
tion % Time – Results
Minutes
Diazinon (Roundup) 100% 60 Pass
Motor Oil-40 wt. 100% 60 Pass
Bleach-household 100% 60 Pass
Isocyanate Based Paint 100% 60 Pass
Sodium Hydroxide 50% 60 Pass
Sodium Hypochlorite 10% 60 Pass
Blood Challenge Fluid Assay Pass
Liter – 3.20 x Results
Coverall Coverall Coverall Coverall 108 (PFU/mL) PFU/mL Lab Coat Coverall Coverall Coverall Coverall Most SafeGard™
TG412 TG414 TG417 TG428LAKELAND DISPOSABLE / CHEMICAL PPE
SafeGard ECONOMY ™ SafeGard™ Economy
Applications
Dirt, Oil and Grease
ZONEGARD ® ZoneGard® Applications
Dirt, Oil and Grease
SafeGard™ Protection - Hazardous/Non-hazardous
The Breathable, Lightweight Protection
Economical Design Dry Particulates of Polypropylene
Aerosol Mist
Serged Seam
Serged Seam
SafeGard™ Economy Features: SafeGard™ Economy SMS Fabric Physical Properties ZoneGard® Features: ZoneGard® Fabric Physical Properties
• SafeGard Protection - Ideal for dry particulate and light Physical Property Test Method Units Test Results • Highly breathable Physical Property Test Method Units Test Results
aerosol mist Basis Weight ASTM D3776 oz/y2 1.5 oz/y2 • Great for dirty, grimy environments Basis Weight ASTM D3776 oz/y2 1.25 oz/y2
• Standard coverall design Grab Tensile MD ASTM D5034 lbs. 25 lbs. • Economical
• Available in White or Blue Grab Tensile XD ASTM D5034 lbs. 20 lbs.
Trap Tear MD ASTM D5733 lbs. 7.9 lbs.
Trap Tear XD ASTM D5733 lbs. 6.7 lbs.
SafeGard™ Economy Configurations ZoneGard® Configurations
Coverall Coverall Coverall Coverall All Economy SMS Coverall Coverall Coverall Coverall Sleeve Shoe Cover Bouffant Hat ZoneGard® cover-
E8412 E8414 E8417 E8428 garments are C2412 C2414 C2417 C2428 C2850P-18 C2901P 801-21 alls are available
• Zipper closure • Zipper closure • Zipper closure • Zipper closure available in White • Zipper closure • Zipper closure • Zipper closure • Zipper closure • Elastic ends • Elastic ankles • Bouffant hat in White or Navy.
• Attached hood • Elastic wrists • Attached hood or Blue. Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood Sizes: 18” length Sizes: S/M, L/XL, 2X Sizes: 21” For Navy, add an
Sizes: S – 5X For Blue, add a “N” to the end of
Case Pack: 25 • Boots • Elastic ankles • Elastic wrists “B” at the end of Case Pack: 25 • Boots • Elastic ankles • Elastic wrists Case Pack: 100 pair Case Pack: 200 pair Case Pack: 100 the style number
• Elastic wrists Sizes: S – 5X • Elastic ankles the style number • Elastic wrists Sizes: S – 5X • Elastic ankles
Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Sizes: S – 5X Case Pack: 25 Sizes: S – 5X
Case Pack: 25 Case Pack: 25 Case Pack: 25 Case Pack: 25
22 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 23LAKELAND DISPOSABLE / CHEMICAL PPE
CHEMMAX 1 ® ChemMax® 1 Applications
Waste Water Treatment
ChemMax® 1 Brand Features
Infectious Disease and Bloodborne Pathogen
ChemMax® 1 Fabric Physical Properties
Property Test Method Units Test
Your First Level of Chemical High and Low PH
Chemicals
tested (sealed seam configuration) Basis Weight ASTM D3776 oz./sq. yd
Results
2.29
Protection Grab Tensile MD pounds 35
Hazardous Liquid Spray Available in multiple seam configurations Grab Tensile XD
ASTM D5034
pounds 27
Trapezoidal Tear MD pounds 13.8
Excellent Protection for High and Low Trapezoidal Tear XD
ASTM D5733
pounds 14.2
PH Chemicals (Acids and Bases) Ball Burst ASTM D751 pounds 25.5
Serged Seam Passes ASTM D6978 Fentanyl Permeation Data for ASTM Recommended List of
Chemicals for Evaluating Protective Clothing Materials
(ASTM F1001)
CAS Physical Normalized
Challenge Chemical
Bound Seam Number State Breakthrough
ChemMax® 1 Configurations
Acetone 67-64-1 Liquid >480
Acetonitrile 75-05-8 Liquid >480
Ammonia Gas 7664-41-7 Gas imm.
Heat Sealed 1,3-Butadiene Gas 106-99-0 Gas imm.
Carbon Disulfide 75-15-0 Liquid >480
Seam
Chlorine Gas 7782-50-5 Gas imm.
Dichloromethane 75-09-2 Liquid imm.
Diethylamine 109-89-7 Liquid imm.
Dimethyl Formamide 68-12-2 Gas imm.
Ethyl Acetate 141-78-6 Liquid imm.
Ethylene Oxide Gas 75-21-8 Gas >480
n-Hexane 110-54-3 Liquid imm.
Gown Apron Apron Hydrogen Chloride Gas 7647-01-0 Gas imm.
ChemMax® 1 is constructed with a unique polyethylene barrier ChemMax® 1 provides economical, lightweight protection C1S527Y C1S650Y C1B657Y Methanol 67-56-1 Liquid imm.
• Open back • Sewn ties • Long sleeves Methyl Chloride Gas 74-87-3 Gas imm.
film and a continuous filament polypropylene nonwoven fabric. against most industrial acid and base chemicals. Bloodborne • Long sleeve Sizes: 28” x 36” • Waist ties
• Elastic wrists Case Pack: 100 Sizes: 28” x 53” Nitrobenzene 98-95-3 Liquid 45 minutes
ChemMax® 1 garments bar many harmful contaminants from pathogen and viral protection make it a cost-effective option • Sewn ties Case Pack: 50 Sodium Hydroxide 50% 1310-73-2 Liquid >480
penetrating to inner clothing. Available with serged, bound and for waste water treatment facilities. ChemMax® 1 also meets the Sizes: 30” x 40” Sulfuric Acid, 96% 7664-93-9 Liquid 315 minutes
Case Pack: 6 Tetrachloroethylene 127-18-4 Liquid imm.
sealed seams for scalability. requirements of EN-1149 for Electrostatic Properties.
Tetrahydrofuran 109-99-9 Liquid imm.
Toluene 108-88-3 Liquid imm.
For Fentanyl Test Results using ASTM D6978 refer to page 10
ChemMax® 1 Coveralls ND = None Detected
> = greater than
L = liquid
G = gas
Numbers reported are averages of samples tested by the ASTM F739 test method. Sample
results vary and therefore averages for these results are reported.
Warnings:
1. ChemMax® 1 is not flame resistant and should not be used around heat, flame sparks, or in
Sleeve Shoe Cover Boot Covers potentially flammable or explosive environments.
C1S850YP-18 C1S901YP C1S903YP 2. Garments made of ChemMax® 1 should have slip resistant or anti-slip materials on the
• Elastic ends • Elastic ankles Serged Seam outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
Sizes: 18” length Sizes: S/M, L/XL, 2X • Elastic top could occur.
Case Pack: 100 pair Case Pack: 200 pair • 17” high Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per-
Sizes: S/M, LG/XL, 2X formed on fabric samples only, not finished garments. Sources for all test data are independent
Case Pack: 200 pair laboratory conditions and not actual use conditions.
Coverall Coverall Coverall Coverall Coverall Coverall Coverall Coverall
1
C1S412Y C1S414Y C1S417Y C1S428Y C1T110Y C1T130Y C1T150Y C1T151Y
Serged Seam Serged Seam Serged Seam Serged Seam Sealed Seam Sealed Seam Sealed Seam Sealed Seam
• Zipper with storm C1B414Y C1B417Y C1B428Y • Collar • Zipper with storm • Zipper with storm • Respirator-fit hood
flap Bound Seam Bound Seam Bound Seam • Storm flap over flap flap • Storm flap over
Sizes: S – 5XL • Zipper with storm • Zipper with storm • Zipper with storm zipper. • Elastic face • Attached hood zipper
Case Pack: 25 flap flap flap • Elastic wrists • Elastic wrists • Elastic wrists • Elastic face and
• Attached hood • Elastic wrists • Attached hood • Elastic ankles • Elastic ankles • Attached boots wrists
• Attached boots • Elastic ankles • Elastic wrists Sizes: S – 5XL Sizes: S – 5XL Sizes: S – 5XL • Attached boots
• Elastic wrists Sizes: S – 5XL • Elastic ankles Case Pack: 6 Case Pack: 6 Case Pack: 6 Sizes: S – 5X
Sizes: S – 5XL Case Pack: 25 Sizes: S – 5XL Case Pack: 6
Case Pack: 25 Case Pack: 25
24 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 25LAKELAND DISPOSABLE / CHEMICAL PPE
CHEMMAX 2 ® ChemMax® 2 Applications
ChemMax® 2 Fabric Physical Properties
Chemical Mixing and
Handling Property Test Method Units Test Results
Environmental Clean Up ChemMax® 2 Brand Features Basis Weight ASTM D3776 oz./sq. yd 4.3
Grab Tensile MD pounds 47
ASTM D5034
Hazardous Material Moderate to high level chemical protection Grab Tensile XD pounds 33.9
Remediation Trapezoidal Tear MD pounds 29.95
Bound and sealed seam configurations Trapezoidal Tear XD
ASTM D5733
pounds 12.47
Ball Burst ASTM D751 pounds 48
2-layer (PP/PE) substrate Surface Resistance EN1149 Ω Pass
Bound Seam
20% stronger than competitive fabrics
Permeation Data for ASTM Recommended List of
Chemicals for Evaluating Protective Clothing Materials
ChemMax® 2 Configurations (ASTM F1001)
Heat Sealed Physical Normalized
Challenge Chemical CAS Number State Breakthrough
Seam
Acetone 67-64-1 Liquid >480
Acetonitrile 75-05-8 Liquid 390
Ammonia Gas 7664-41-7 Gas imm.
1,3-Butadiene Gas 106-99-0 Gas >480
Carbon Disulfide 75-15-0 Liquid imm.
Chlorine Gas 7782-50-5 Gas >480
Dichloromethane 75-09-2 Liquid imm.
Diethylamine 109-89-7 Liquid 165
Quality, Value, Durability with the Proven Protection Apron Apron Boot Covers
Dimethyl Formamide
Ethyl Acetate
68-12-2
141-78-6
Gas
Liquid
>480
21
C2B657 C2T730 C2T740P
of Saranex® 23P Barrier Film Bound Seam Sealed Seam Sealed Seam Ethylene Oxide Gas 75-21-8 Gas >480
• Long sleeves • Long sleeves • Elastic top n-Hexane 110-54-3 Liquid >480
• Waist ties • Elastic wrists • 17” high (extends over Hydrogen Chloride Gas 7647-01-0 Gas >410
Sizes: 28” x 53” • Hook and loop straps calf Methanol 67-56-1 Liquid >480
ChemMax® 2 is useful in protecting against hazardous chemi- The unparalleled strength and softness features a Saranex® 23P Case Pack: 50 at neck Sizes: S/M, LG/XL, 2X
• Material ties in back Case Pack: 12 pair Methyl Chloride Gas 74-87-3 Gas >480.
cals and contaminants found in the work place and is a superior film on two layers of a unique bi-component spunbond
Sizes: 28” x 53” Nitrobenzene 98-95-3 Liquid 45
and economical chemical protective suit developed using the nonwoven substrate which provides protection for chemical Case Pack: 12 Sodium Hydroxide 50% 1310-73-2 Liquid >480
knowledge and expertise that you have come to expect from mixing and handling, environmental clean-up, hazardous mate- Sulfuric Acid, 98% 7664-93-9 Liquid >480
Tetrachloroethylene 127-18-4 Liquid >480
Lakeland®. rials remediation and response, pharmaceutical manufacturing,
Tetrahydrofuran 109-99-9 Liquid imm.
spray painting and general industry. Toluene 108-88-3 Liquid imm.
ND = None Detected
> = greater than
ChemMax® 2 Coveralls L = liquid
G = gas
Numbers reported are averages of samples tested by the ASTM F739 test method. Sample
results vary and therefore averages for these results are reported.
Warnings:
1. ChemMax® 2 is not flame resistant and should not be used around heat, flame sparks, or in
Sleeve Level B Encapsulated Level B Encapsulated potentially flammable or explosive environments.
C2B850P-18 Suit Suit 2. Garments made of ChemMax® 2 should have slip resistant or anti-slip materials on the
Bound Seam C2T400 - Flat Back C2T450 - outer surface of boots, shoe covers or other garment surfaces in conditions where slipping
• Elastic ends • Rear entry Expanded Back could occur.
Sizes: 18” length • Flat back • Rear entry
Case Pack: 100 pair • 48” zipper • Expanded back Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per-
• Storm flap • 48” zipper formed on fabric samples only, not finished garments. Sources for all test data are independent
2
• 20 mil Vinyl face shield • Double storm flap with laboratory conditions and not actual use conditions.
• Elastic wrists hook and loop
• 1 exhaust port with • 20 mil Vinyl face shield
Coverall Coverall Coverall Coverall Coverall Coverall Coverall shroud • Elastic wrists
C2B414 C2B417 C2B428 C2T110 C2T132 C2T151 C2T165 • Air tube inlet • 2 exhaust ports with
Bound Seam Bound Seam Bound Seam Sealed Seam Sealed Seam Sealed Seam Sealed Seam • Attached sock boots with shroud
• Zipper with storm • Zipper with storm • Zipper with storm • Collar • Respirator fit hood • Respirator fit hood • Respirator fit hood boot flap • Air tube inlet
flap flap flap • Storm flap over • Zipper with storm • Zipper with storm • Storm flap over • Suit is not gas/vapor tight • Attached sock boots with
• Attached hood • Elastic wrists • Attached hood zipper. flap flap zipper Sizes: M – 4XL boot flap ChemMax® 2 Bound Seam
• Attached boots
• Elastic wrists
• Elastic ankles
Sizes: S – 5XL
• Elastic wrists
• Elastic ankles
• Elastic wrists
• Elastic ankles
• Elastic face
• Elastic wrists
• Attached hood
• Elastic wrists
• Attached boots with
boot flaps
Case Pack: 3 • Suit is not gas/vapor tight
Sizes: M – 4XL
coveralls now feature
Sizes: S – 5XL
Case Pack: 12
Case Pack: 12 Sizes: S – 5XL
Case Pack: 12
Sizes: S – 5XL
Case Pack: 6
• Elastic ankles
Sizes: S – 5XL
• Attached boots
Sizes: S – 5XL
• Velcro® closure over
zipper
Case Pack: 3 blue binding for easier
Case Pack: 6 Case Pack: 6 Sizes: S – 5XL identification.
Case Pack: 6
26 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 27LAKELAND DISPOSABLE / CHEMICAL PPE
DISPOSABLE FR PYROLON PLUS 2 ®
Perfect for use over thermally protective and
Pyrolon® Plus 2 Applications
Dirt, Oil and Grease
Hazardous Dry Particulates
Flammable Environment
Why Wear an FR Disposable Over Your Primary FR Clothing? Secondary Primary arc protective clothing!
FR Disposable FR Protective
Flame resistant disposables are intended to provide liquid and
Protection Garment
dust protection when worn over a primary thermal protective
garment. To keep your new, primary FR clothing clean and free
Sewn Seam
of contaminants, make sure that you are selecting the correct
disposable garment for your application.
Standard disposables are made from polypropylene or polyeth-
ylene (or both). These are thermoplastic derivatives of oil, both
of which are flammable materials that will ignite, melt and burn.
Any fabric that melts and drips in the event of an electric arc or
flash fire should not be worn over primary
FR garments.
Repellency is also a critical attribute to consider when selecting
an FR disposable garment. Understand the repellency perfor-
mance of your disposable garment to ensure that possible flam-
mable contaminants are not soaking through to your primary
• Second generation Pyrolon® Plus 2 offers wet or dry strength Pyrolon® Plus 2 Fabric Physical Properties
FR clothing. Make sure that your FR disposable has the repellen-
superior to that provided by other traditional Flame Resistant
cy to keep grease, hydraulic fluid and other harmful contami- disposables Physical Property Test Method Units Test
Results
nants from compromising your primary protective clothing. • Meets the NFPA 2113 requirements for section 5.1.9.
Basis Weight ASTM D3776 oz./sq. yd 2.4 oz/y2
• ANSI/ISEA 203 Certified
Don’t be misled by others citing the NFPA 701 curtain and Grab Tensile MD ASTM D5034 lbs. 31.0 lbs.
• Pyrolon® Plus 2 is breathable, making this a cool and comfortable
drapery standard for their flammability performance. All Pyro- garment to wear. Grab Tensile XD ASTM D5034 lbs. 20.0 lbs.
lon® products are designed to be worn over primary protective Pyrolon® Plus 2 can be used in work environments where hazardous Trapezoidal Tear MD ASTM D5733 lbs. 4.5 lbs.
flame resistant clothing, are tested to ASTM F1930 and meet the or non-hazardous contaminants may be present. Trapezoidal Tear CD ASTM D5733 lbs. 5.6 lbs.
NFPA 2113 requirements for section 5.1.9. Pyrolon® Plus 2 is certified to the ANSI/ISEA 203-2018 American Air Permeability ASTM D737 cfm 52 cfm
National Standard for Secondary Single-Use Flame Resistant Char Length MD ASTM D6413 inches 3.70 inches
Protective Clothing for Use Over Primary Flame Resistant Protective
Know the Facts! Clothing. Char Length XD ASTM D6413 inches 3.70 inches
Get the FR protection you demand. Lakeland® has produced a Ignition Point – degrees F 1000˚ F
video which demonstrates the superiority of Pyrolon® Plus 2 vs. Surface Resistance EN1149 Ω Pass
competing fabrics. Don’t settle for substandard FR PPE that can Pyrolon® Plus 2 Configurations
be downright dangerous to wear. Visit the Lakeland® website at
www.lakeland.com, or scan the QR code on this page.
Coverall Coverall Coverall Coverall Lab Coat Hood Boot Cover Pyrolon® Plus2
7412 7414 7417 7428 7101 7713B 7903BP coveralls and
7412B 7414B 7417B 7428B 7101B • Elastic face • Elastic top lab coats are
• Zipper closure • Zipper closure • Zipper closure • Zipper closure • Snap closure • Covers shoulders • 17” high available in White
or Blue. For Blue,
Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood • 2 pockets • One size • Available in Blue add an “B” to the
Case Pack: 25 • Boots • Elastic ankles • Elastic wrists • Long sleeve • Available in Blue only end of the style
• Elastic wrists Sizes: S – 5X • Elastic ankles Sizes: S – 5X only Sizes: S/M, L/XL, 2X number
Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 30 Case Pack: 250 Case Pack: 200 pair
lakeland.com/us/pyrolon-alt Case Pack: 25 Case Pack: 25
28 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 29LAKELAND DISPOSABLE / CHEMICAL PPE
PYROLON CRFR ® Pyrolon® CRFR Applications
Petrochemical
Secondary
FR and
Chemical
Pyrolon® CRFR helps reduce Total Body Burn!
Pyrolon® CRFR third party testing by North Carolina State University
to ASTM F1930 confirms:
Chemical Resistance and Flammable Liquid Handling
Protective Material Body Burn Results
Flame Resistance in one Disposable Drug Lab Investigation Garment 6.5 oz. Westex® DH alone 16.4% total body burn
Protective Garment Pyrolon® CRFR over 6.5 oz.
Westex® DH
15.84% total body burn
Primary FR
Heat Sealed Protective Pyrolon® CRFR Physical Properties, 2.5 Mil
Seam
Garment Physical Property Test Method Units Test
Results
Basis Weight oz./sq. yd 4.92
Grab Tensile MD lbs. 34
Grab Tensile XD lbs. 27
Mullen Burst lbs./sq.in. 35
Char Length MD inches 4.7
Char Length XD inches 4.5
Afterflame seconds 60
Acetonitrile 75-05-8 Liquid >60
Benzene 71-43-2 Liquid >60
Pyrolon® CRFR Brand Features: Pyrolon® CRFR Coveralls
Carbon Disulfide
Diesel Fuel
75-15-0
N/A
Liquid
Liquid
>60
>60
Diethylamine 109-89-7 Liquid >60
Combines Chemical Resistance with Flame Resistance Crude Oil N/A Liquid >60
Ethyl Acetate 141-78-6 Liquid >60
Does Not Melt or Drip n-Hexane 110-54-3 Liquid >60
Hexamethylene Diiso-
Meets the NFPA 2113 Requirements for Section 5.1.9 cyanate 822-06-0 Liquid >60
Hydrochloric Acid 7647-01-0 Liquid >60
Penetration Data for ASTM F903 Standard Chemicals Methanol 67-56-1 Liquid >60
Methyl Ethyl Ketone 78-93-3 Liquid > 60
(MEK)
Pyrolon CRFR is the Chemical Resistant and Flame Resistant Methyl Isobutyl Ketone 108-10-1 Liquid >60
disposable option designed to protect your Primary FR and ARC Monochlorobenzene 108-90-7 Liquid >60
Rated Garments when chemical splash is a concern. Pyrolon n-Butyl Acetate 123-86-4 Liquid >60
CRFR garments bar contaminating flammables like paint, oil and Coverall Coverall Apron Orthodichlorobenzene, 95-50-1 Liquid >60
51130 51150 51730 Grade F
grease, hazardous liquids and contaminants, and dry particu- • Hood • Hood • Long sleeve Polychlorinated 92-52-4 Liquid > 60
• Storm flap over • Storm flap over • Elastic wrists Biphenyl (PCB)
lates from penetrating to inner Primary Protective Garments, zipper zipper • 32” length Sodium Hydroxide, 50% 1310-73-2 Liquid >60
potentially saturating them with flammable substances. • Elastic face • Elastic face and Sizes: L-4X Sulfuric Acid, 98% 7664-93-9 Liquid 45
• Elastic wrists and wrists Case Pack: 12
ankles • Attached boots Surrogate Gasoline
Pyrolon CRFR is designed to be worn over Primary FR/AR Pro- 108-88-3
Sizes: M - 5X Sizes: M - 5X (Toulene 50%) Liquid > 60
540-84-1
(Isooctane 50%)
tective Clothing for environments where flash fire is a concern. Case Pack: 6 Case Pack: 6
Tetrachloroethylene 127-18-4 Liquid >60
Utilizing Pyrolon CRFR when both chemical splash and flash Toluene 108-88-3 Liquid >60
fire are a concern helps the wearer meet the NFPA 2113 require- Trichlorobenzene Mixture Liquid >60
Mixture
ments for section 5.1.9. Xylene 1330-20-7 Liquid >60
Note: Chemical Resistance Data is in accordance with ASTM F903 test method. Testing
is performed on fabric samples only, not finished garments. Sources for all test data are
independent laboratories. All tests were performed under laboratory conditions and
not actual use conditions.
30 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 31LAKELAND DISPOSABLE / CHEMICAL PPE
PYROLON CBFR ® Pyrolon® CBFR Applications
Ammonia
Hydrofloric Acid
Pyrolon® CBFR Brand Features:
Combines Advanced Chemical
Pyrolon® CB-FR Physical Properties Physical Properties
Physical Property Test Method Units Test Results
Advanced Chemical Barrier and Barrier with Flame Resistance Basis Weight ASTM D3776 oz./sq. yd 7.16 oz/y2
Petrochemical
Flame Resistance for the Highest Thickness ASTM D1777 mils 12
Chemical Hold-Out Higher Chemical Hold-out Grab Tensile MD ASTM D5034 lbs. 55.2 lbs.
Than CRFR Grab Tensile XD ASTM D5034 lbs. 42.88 lbs.
Mullenburst ASTM D3786 psi 32.5
Chemical Permeation Data Trapezoidal Tear MD ASTM D5587 lbs. 16.28 lbs.
Heat Sealed Available Trapezoidal Tear CD ASTM D5587 lbs. 24.08 lbs.
Seam Surface Resistance EN1149 Ω Pass
Lower Predicted Body Burn when Pyrolon® CB-FR Permeation Testing - ASTM F1001
Paired with Lakeland’s 6.5 oz. Chemical CAS Physical Concentra- ASTM F739 EN 369
Number State tion
Westex® DH FR Coverall Acetone 67-64-1 Liquid 99% >480 >480
Acetonitrile 75-05-8 Liquid 99% >480 >480
ANSI/ISEA 203 for Secondary Acrylonitrile 107-13-1 Liquid 99% >480 >480
Benzene 71-43-2 Liquid 99% >480 >480
Single-Use Flame Resistant Carbon Disulfide 75-15-0 Liquid 99% >480 >480
Protective Clothing for Use Crude Oil
Dichloromethane
Various
75-09-2
Liquid
Liquid
Mixture
99%
58
>480
>480
>480
Over Primary Flame Resistant Diesel Fuel Various Liquid Mixture >480 >480
Diethylamine (DEA) 109-89-7 Liquid 99% 130 309
Protective Clothing Dimethylformamide 68-12-2 Liquid 99% >480 >480
(DMF)
Ethyl Acetate 141-78-6 Liquid 99% >480 >480
Gasoline Various Liquid Mixture 138 >480
Hydroflouric Acid 7664-39-3 Liquid 48% >480 >480
n-Hexane 110-54-3 Liquid 99% >480 >480
Pyrolon CBFR - Advanced chemical protection and self extin- Respirator fit hood Secondary Methanol 67-56-1 Liquid 99% 25 33
Nitrobenzene 98-95-3 Liquid 99% >480 >480
guishing FR protection. Designed to be worn over primary FR FR and Sodium Hydroxide, 50% 1310-73-2 Liquid 50% >480 >480
protective clothing, for environments where both chemical Chemical Sulfuric Acid 93.1% 66˚B 7664-93-9 Liquid 93% >480 >480
exposures and flash fire are a concern. This advanced chemical Protective Tetrachloroethylene 127-18-4 Liquid 99% >480 >480
(perc)
barrier is self-extinguishing, won’t melt or drip, and meets the Tape sealed seams Garment Tetrahydrofuran (THF) 109-99-9 Liquid 99% 13 21
NFPA 2113 requirements for section 5.1.9. Toluene 108-88-3 Liquid 99% >480 >480
Gases
Ammonia Anhydrous 7664-41-7 Gas 99% >480 >480
Pyrolon CBFR is your choice for protection in Pyrolon® CBFR Configurations
1, 3-Butadiene inhibit- 106-99-0 Gas 99% >480 >480
Protective ed 99%
harsh chemical environments for the likes of storm flap over Chlorine 99.5% 7782-50-5 Gas 99% >480 >480
zipper
Ammonia, Hydroflouric Acid and other serious Ethylene Oxide 99.7% 75-21-8 Gas 99% >480 >480
Hydrogen Chloride
chemicals where workers need chemical 99% 7647-01-0 Gas 99% 182 >480
protection over primary FR protective Methyl Chloride 99.5% 74-87-3 Gas 99% >480 >480
Note: Chemical Resistance Data is in accordance with ASTM F739 test method. Testing is performed on fabric samples
garments. only, not finished garments. Sources for all test data are independent laboratories. All tests were performed under
laboratory conditions and not actual use conditions.
Primary FR
Protective Pyrolon® CB-FR Predicted Body Burn when worn over a
Garment Lakeland® 6.5 oz. Westex® DH FR Coverall (includes the head)
6.5 oz. Westex® DH coverall alone – 16.4% Total Body Burn
Burn 2nd Degree 3rd Degree Average
Coverall Coverall
52151 52132 Garment 1 0% 6.56% 6.56%
• Respirator-fit hood • Respirator-fit hood Garment 2 0.82% 6.56% 7.38%
Styles with and • Storm flap over • Storm flap over
without attached zipper zipper Garment 3 2.46% 6.56% 9.02%
boots • Elastic face and • Elastic face, wrists
wrists and ankles Overall Average 7.65%
• Attached boots Sizes: S - 5XL
Sizes: S - 5XL Case Pack: 6
Case Pack: 6
32 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 33You can also read
