Disposable and Chemical Protective Clothing - Lakeland
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
LAKELAND DISPOSABLE / CHEMICAL PPE Disposable and Chemical Protective Clothing MicroMax® VP Bloodborne Pathogen and Chemical Protection all in one garment! Page 4 CleanMax® Cleanroom Apparel - available in Clean Manufactured Non-Sterile or Clean Manufactured Sterile versions Page 6 MicroMax® NS Vend Packs! Ideally packaged for vending, retail, response kits and single use applications Page 16 PermaSURE® Mobile-friendly online tool that models permeation rates and safe-use times for over 4,000 chemicals Page 34 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com
CONTENT Disposable Clothing Chemical Clothing 4 MICROMAX® VP 24 CHEMMAX® 1 Bloodborne Pathogen and Chemical Protection Your First Level of Chemical Protection 6 CLEANMAX® 26 CHEMMAX® 2 4 MICROMAX® VP Cleanroom apparel – Clean Manufactured Quality, Value, Durability with the Proven Non-Sterile or Clean Manufactured Sterile Protection of Saranex® 23P Barrier Film configurations 38 CHEMMAX® 3 16 MICROMAX® NS Advanced Chemical Protection for Industry, Microporous protection from dirt, grease, Emergency Response and Law Enforcement grime and light chemical splash! 40 CHEMMAX® 4 PLUS 18 MICROMAX® NS COOL SUIT Breathable back panel maximizes comfort! Superior, Advanced Chemical Protection. Now Supported by PermaSURE® 6 CLEANMAX® 20 MICROMAX® 42 INTERCEPTOR® PLUS Added durability for the toughest First Line Defense Against Extreme Chemical environments Hazards. Now Supported by PermaSURE® 21 SafeGard™ 45 COOLVEST™ Lightweight, breathable protection Chemical Suit Cooling Vest from 3 tough layers 22 SafeGard™ ECONOMY FR Disposable Clothing 40 CHEMMAX® 4 PLUS 34 PERMASURE® SafeGard Protection - Economical Design 29 PYROLON® PLUS 2 23 ZONEGARD® Perfect for use over thermally protective and Breathable, Lightweight Protection arc protective clothing! of Polypropylene 30 PYROLON® CRFR Chemical Resistance and Flame Resistance in one Disposable Protective Garment 32 PYROLON® CBFR Advanced Chemical Barrier and Flame Resistance for the Highest Chemical Hold-Out Resources 2 Lakeland® World-Class Sales and Support Note that it is up to the 9 Tips for Cleanroom Apparel Selection professionals responding 10 Sizing Guide and Critical Protection Data to any industrial or viral 11 Lakeland Brand Product Range Overview environment to do a thorough 12 Protection Levels and Seam Styles hazard assessment based on 14 Apparel Selection Guide the task to be performed and 28 Disposable FR Guide determine the complete PPE ensemble for the hazard(s) 34 PermaSURE® – Mobile-friendly on-line tool that models permeation rates! they will face. 44 Chemical Suit Options and Accessories
LAKELAND DISPOSABLE / CHEMICAL PPE PROTECTING WORKING Lakeland® Industries is a global manufacturer of personal protective equipment, specializing in Disposable PROFESSIONALS and Chemical Protective Apparel, FR/AR Clothing and Protective Gear for First Responders. SINCE 1982 For over 35 years Lakeland® has provided products to the working professionals in Electric and Gas Utilities, the Oil and Gas Industry, General Manufacturing, Public Safety and the Petrochemical sectors, keeping workers both safe and comfortable on the job. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 1
World-Class Sales and Support – all around the globe At Lakeland® Industries, our number one priority is creating protective garments that protect your people from hazardous particulates, liquids and chemicals, blood, diseases, and even fire and arc flash. Throughout the world, Lakeland® products Protect Your People®. It’s what we do. Headquartered in Ronkonkoma, New York, since 1982, and supported by a global team in over 18 countries around the world, you can trust our experience, our expertise, and most importantly, our proven track record of developing and delivering superior garments that provide the protection and performance you require on the job, every day. Lakeland’s customers worldwide have access to nearly 4 decades of our expertise developing and supplying products to the Oil and Gas, Petrochemical, Utility, Wind Energy, Healthcare, Cleanroom and hundreds of other Industries around the globe. Lakeland’s Team of Global Experts are ready to assist. Any application. Anywhere. EUROPE CHINA NEW YORK RUSSIA CANADA VIETNAM ALABAMA INDIA AUSTRAILIA MEXICO ARGENTINA CHILE 2
LAKELAND DISPOSABLE / CHEMICAL PPE Global Manufacturing and Design - supporting a worldwide customer network Lakeland® Industries’ products have established and maintained a global reputation for overall quality and are recognized as the industry’s gold standard. We design and manufacture a wide variety of technologically advanced protective clothing in our factories around the world. With manufacturing facilities in the United States, Mexico, China, Vietnam and India, Lakeland® is well positioned to source leading edge materials and produce the most advanced garments available to any region of the globe. Lakeland’s use of advanced technology doesn’t stop with product development and design. Lakeland’s customers have access to leading edge data and information to assist with proper product selection, calculate safe-use times and even model the effects of environmental changes and how they influence chemical permeation rates. We Design, We Develop, We Manufacture, and We Deliver. All to Protect Your People® 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 3
MicroMax® VP Applications Crime Scene Cleanup Research Laboratories MICROMAX VP ® Emergency Medical Response Embalming / Forensics Bloodborne Pathogen and Chemical Protection Serged Seam Passes ASTM F1670/F1671 and Passes ASTM D6978 Fentanyl MicroMax®VP is specifically designed to protect when the risk • Protective hood of blood, body fluids, bloodborne pathogens and viral contam- • Seamless front reduces risk of contaminant exposure ination are the greatest. Ideal for use in crime labs, crime scene • Taped storm flap protects zipper clean up and by emergency response personnel. • Elastic back for more comfortable fit • Passes ASTM F1670/F1671 for Blood and Viral Protection MicroMax® VP Fabric Physical Properties MicroMax® VP Fabric Liquid Penetration Data Physical Property Test Method Units Test Results Physical Property Test Method Test Results Material Thickness ASTM D1777 15 mil Liquid Penetration Using Synthetic ASTM F1670 Pass Blood Material Weight ASTM D3776 80 gsm Viral Penetration using фX174 ASTM F1671 Pass bacteriophage suspension Tensile Strength MD ASTM D5034 lbs. 36.30 lbs. Tensile Strength CD ASTM D5034 lbs. 24.15 lbs. MicroMax® VP Fabric ASTM F903 Liquid Penetration Data Elongation MD ASTM D5034 % 59 Avg. Physical Property Test Method Test Results Elongation CD ASTM D5034 % 71 Avg. Methanol ASTM F903 Pass 16 g/sq. Water Vapor Transmis- Ethyl Acetate ASTM F903 Pass ASTM E96 meter/ 24 hrs. sion Rate avg. Sulfuric Acid (97%) ASTM F903 Pass Bursting Strength ISO 13938-1 29.4 psi avg. Tetrahydrofuran ASTM F903 Pass Hydraulic Method CPSC16 CFR Sodium Hydroxide ASTM F903 Pass Burn Test 45° Pass 1610 Acetone ASTM F903 Pass The test Hydrofluoric Acid ASTM F903 Pass Surface Resistance sample Requirement for BS EN1149 Ω meets the Acetonitrile ASTM F903 Pass EN1149-5:2008 is ≤2.5 requirement x 10⁹ Ω. 2.4 X 10⁸ For Fentanyl Test Results using ASTM D6978 refer to page 10 4
LAKELAND DISPOSABLE / CHEMICAL PPE MicroMax® VP - Premium Protection from High-Risk Contaminants! Protective hood Seamless front reduces the risk of possible contamination from liquid penetration Taped storm flap keeps contaminants away from zipper Elastic back gives a more comfortable fit and helps prevent rip-outs MicroMax® VP Configurations Coverall Coverall MVP414 MVP428 • Zipper closure • Zipper closure • Attached hood • Attached hood • Boots • Elastic wrists • Elastic wrists • Elastic ankles Sizes: S – 5X Sizes: S – 5X Case Pack: 25 Case Pack: 25 Available with attached boots to help prevent cross- contamination during an event 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 5
CleanMax® Applications Cleanrooms Pharmaceutical CLEANMAX ® Compounding Cleanroom Apparel Bound Seam EN ISO 13982-1 EN 13034 EN 1073-2:2002 EN 14126:2003 :2004 +A1:2010 :2005 +A1:2009 TIL = Class 1 (Type 5B, 6B) Available in Clean Manufactured Non-Sterile or Clean Manufactured Sterile configurations STERILE R Irradiation Sterilization All Lakeland® CleanMax® Apparel is: CleanMax® Fabric Physical Properties • IEST-RP-CC003 Category I Particle Cleanliness Physical Property Test Method Units Results • Latex and Silicone Free Basis Weight ASTM D3776 oz/y2 1.55 oz/y2 • Compatible with ISO Class 4 -8 Cleanrooms and all Grab Tensile MD ASTM D5034 lbs. 22.0 lbs. Controlled Environments Grab Tensile XD ASTM D5034 lbs. 14.0 lbs. • Individually packaged and protective outer bag for ante areas Trapezoidal Tear MD ASTM D1117 lbs. 9.0 lbs. • Resistant to blood and body fluid penetration Trapezoidal Tear CD ASTM D1117 lbs. 5.8 lbs. • Resistant to viral penetration • Resistant to Blood Borne Pathogens Ball Burst ASTM D3787 lbs. 19.0 lbs. • Chemical Penetration Resistance to oils, bleach and Air Permeability ASTM D737 cfm
LAKELAND DISPOSABLE / CHEMICAL PPE Lakeland® Industries has spent over 30 years being an industry leader protecting people in the workplace and now we’ve extended our expertise to protect both your people and your cleanroom and/or controlled environment. CleanMax® is Does Your Cleanroom a high-quality microporous laminate material that is lightweight and breathable Apparel Meet Current but is impervious to liquids, harsh chemicals and microorganisms. IEST Standards? Both CleanMax® Clean Manufactured Non-Sterile and CleanMax® Clean Manufactured Sterile meet IEST-RP-C003 Category I particulate cleanliness Read our whitepaper and standards and are ready for immediate use in ISO Class 4 – 8 Cleanrooms. All find out... sterile garments are gamma radiation sterilized to a level of 10-6 SAL (Sterility Assurance Level) . These garments provide excellent comfort as well as protection, so you can easily don and doff your garments to reduce excursions and risk of contamination. lakeland.com/us/cleanroom-whitepaper Clean Sterile Garments and Packaging CleanMax® Clean Manufactured Sterile garments are sterile to a sterility assurance level of 10-6 SAL, and are compatible with ISO Class 4-8 Cleanrooms and all Controlled Environments CleanMax® Configurations CTL191 CTL417 CTL428 CTL713 CTL903 CTL850 Clean Manufactured Non-Sterile Garments Frock – CTL191CM Coverall – Coverall – Hood – CTL713CM Boot Cover – Sleeve • Mandarin collar CTL417CM CTL428CM • Covers shoulders CTL903CMP CTL850CMP-18 • Zipper closure • Zipper closure • Zipper closure • One size • Tunneled elastic top • Bound seams • No pockets • Tunneled elastic on • Attached hood • Ties to customize fit • 19” high • Tunneled elastic • Tunneled elastic wrists (with thumb • Tunneled elastic on Case Pack: 100 • Non-skid Vinyl sole • Thumb loops wrists with thumb loops), ankles, and wrists (with thumb Sizes: S/M, L/XL, 2X Size: 18” length loops back half of waist loops), ankles, and Case Pack: 50 pair Case Pack: 50 pair Sizes: M – 5X Sizes: M – 5X back half of waist Case Pack: 30 Case Pack: 25 Sizes: M – 5X Case Pack: 25 Irradiation Clean Manufactured Sterile Garments STERILE R Sterilization Clean Sterile Coverall – Coverall – Hood – CTL713CS Boot Cover – Sleeve • Certificate of Radia- CTL417CS CTL428CS • Covers shoulders CTL903CSP CTL850CSP-18 tion included • Zipper closure • Zipper closure • One size • Tunneled elastic top • Bound seams • Gamma radiation • Tunneled elastic on • Attached hood • Ties to customize fit • 19” high • Tunneled elastic indicator dots on wrists (with thumb • Tunneled elastic on Case Pack: 100 • Non-skid Vinyl sole • Thumb loops each package loops), ankles, and wrists (with thumb Sizes: S/M, L/XL, 2X Size: 18” length • IPA resistant ink back half of waist loops), ankles, and Case Pack: 50 pair Case Pack: 50 pair Sizes: M – 5X back half of waist Case Pack: 25 Sizes: M – 5X Case Pack: 25 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 7
CleanMax® Features and Benefits Clean Manufactured Garments All bound seams Garments that are clean man- CleanMax® garments feature ufactured offer significantly bound seams, which are precise- less particle counts in contrast ly sewn with an additional outer to garments that are not clean binding. This increases seam manufactured. strength and provides a better barrier from break through and Smooth Storm Flap for Added Level of Protection protection from strike through Very few disposable cleanroom than simple serged seams. garments have the added Smooth surface area prevents protection of a placket storm particles from sticking flap. Covering the zipper further CleanMax® garments are protects the critical chest and smoother than other leading front area of the garment from brands, which means particu- potential particulate break- lates are less likely to harbor on through. Additionally, our storm the garment surface. flap has finished seams so there are no exposed raw edges. Cuffed ankle allows for six inches of freedom Thumb Loops Expertly folded to reduce surface Plastic wrists with thumb loops contamination during the don- help secure the coveralls and ning process, the cuffed ankle frocks in place to prevent the provides six inches of freedom potential exposure of skin while when you are stepping into the worn during normal activities. gown Chemical Penetration Resistance CleanMax® offers chemical penetration resistance to oils, bleach and 50 percent sodium hydroxide. Premium Packaging Means Less Wrinkles, Less excursions Garments are individually packaged and expertly folded to prevent excessive wrinkling Download our FREE and the potential for increased Disposable Cleanroom excursions. Garment Guide! Get the added safety of CleanMax®, which offers resistance to blood and body fluid penetration, viral penetration and lakeland.com/us/cleanroom-guide bloodborne pathogens! 8
LAKELAND DISPOSABLE / CHEMICAL PPE Disposable Cleanroom Suits: Tips for Cleanroom Apparel Selection Confidence in your cleanroom starts with understanding how Applications for CleanMax® Cleanroom Apparel to select the right disposable apparel for your unique needs. CleanMax® Clean Manufactured Sterile Part of the benefit of working with Lakeland® is ongoing access • Aseptic or Terminally Sterile Cleanroom Environments to our team of cleanroom industry experts. In just a few min- • ISO Class 4-8 Cleanroom utes, we will work with you to determine the type of garment • Sterility assurance level of 10-6 SAL required for your application and environment, and discuss how CleanMax® Clean Manufactured Non-Sterile we can help you protect your team effectively with clean-manu- • ISO Class 4-8 or below Non-Aseptic Cleanrooms or factured garments. Controlled Environments Garment Configurations ISO 5 ISO 5 Apparel ISO 8 ISO 7 ISO 6 Sterile ISO 4 ISO 3 ISO 1 & 2 Non-Sterile (Aseptic) Hair cover R R R R R R R AS Barrier gloves AS AS AS AS R R R R Facial cover AS AS AS R R R R AS Hood AS AS AS R R R R AS Frock R R AS AS NR NR NR NR Coverall AS AS R R R R R R Shoe cover R R AS AS NR NR NR NR Boot AS AS R R R R R R Typical Frequency of 2X/week 2X/week 3X/week 1X/day Per Entry Per Entry Per Entry Per Entry Change* Chart shows Lakeland® garments relevant to ISO 5. Recommendations from IEST-RP-CC003. R = Recommended, NR = Not Recommended, AS = Application Specific CleanMax® vs. Reusables: Which is Better? Each time a cleanroom garment is handled, a chance for contamination occurs. A reusable garment goes through multiple steps in the laundering process leading to greater risk of contamination. Initial Initial Manufacturing Manufacturing Cleanroom Sterilize Worker Uses Garment CleanMax® Reusables 2 STEPS Cleanroom Worker Repackage - potential for cross contamination 7 STEPS Transport with soiled garments from other companies Disposal Uses Garment Launder - potential for Inspection cross contamination Sort - Repair if necessary Choose Lakeland® CleanMax® and feel secure in your investment in your most critical assets; your people, your controlled environment and your product 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 9
Lakeland® Brand Disposable/Chemical Sizing Guide 7’0” 6’6” 6’ 5’6” 5’ 4’6” 4’ 3’6” 3’ 2’6” 2’ S M L XL 2XL 3XL 4XL 5XL Height: Up to 5’6” Up to 5’7” Up to 5’9” Up to 6’0” Up to 6’3” Up to 6’5” Up to 6’7” Up to 6’9” Weight: Up to 110 lbs Up to 130 lbs Up to 150 lbs Up to 180 lbs Up to 220 lbs Up to 250 lbs Up to 280 lbs Up to 320 lbs The above chart is a suggested guide for garment selection. Proper fit varies with individual body shape and allowances should be made for clothing that will be worn underneath the garment. Always choose the larger size should you fall in between the suggested guidelines or are uncertain on which size to select. Critical Protection - Tested Performance Hazard Type Lakeland® Brand Test Method Test Results ISO 16604:2004 Protection against Blood Pass Class 6 (Maximum Level) and Body Fluids Blood and Infectious Agent MicroMax® NS ISO 22611:2003 Protection against Pass Class 3 (Maximum Level) Biologically Contaminated Aerosols ASTM F1670 Liquid Penetration to Synthetic MicroMax® NS Pass Blood Bloodborne Pathogens MicroMax® VP ASTM F1671 Viral Penetration фX174 Pass Bacteriophage Suspension ASTM F903 Penetration Testing – Pesticide Protection MicroMax® NS Pass Diazinon (Roundup) Isocyanate Based Paint MicroMax® NS ASTM F903 Penetration Testing Pass Ammonia – 99% Anhydrous Gas Pyrolon® CBFR ASTM F739 Permeation Testing >480 minutes (CAS Number 7664-41-7) Fentanyl - Testing per ASTM D6978 Minimum Steady State Breakthrough Test Drug and Permeation Rate Lakeland® Brand Detection Time Other Observations Concentration (Specimen 1/2/3) (Specimen 1/2/3) (µg/cm2/minute) (Minutes) Fentanyl Citrate Slight swelling; MicroMax® VP* >240 NA Injection, 100 mcg/2mL no degradation Fentanyl Citrate Slight swelling; ChemMax® 1** >240 NA Injection, 100 mcg/2mL no degradation * MicroMax® VP fabric holds out liquid Fentanyl, but is only recommended for Fentanyl in powder form due to serged seam construction ** ChemMax® 1 has >240 min hold out for liquid Fentanyl; Taped/Sealed Seam Garments are recommended for Fentanyl in liquid form Users should also ensure the gloves they are using for chemotherapy have been tested against the most recent standards. The current standard for exam gloves used in chemotherapy is ASTM D6978-05 “Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs. Prior to ASTM D6978-05 many exam gloves were tested against ASTM F739 “Resistance of Protective Clothing Materials to Permeation by Liquids or Gases Under Conditions of Continuous Contact”. ASTM D6978-05 uses ASTM F739 as a test method, but has a chemical permeation requirement that is 10 times more stringent than what is required by ASTM F739. Users of gloves tested under ASTM D6978-05 have a higher level of confidence that the gloves they are using are tested to the current, more stringent ASTM standard.” 10
LAKELAND DISPOSABLE / CHEMICAL PPE Lakeland® Brand Product Range Overview Interceptor® Plus Interceptor® Plus achieves the highest levels of chemical protection required for extremely hazardous areas, including Level A HazMat response. All supported by PermaSURE. ChemMax® 4 Plus ChemMax® 4 Plus fabric incorporates a 6 layer protective barrier system and is supported by the PermaSURE Toxicity Risk Modeler Software Application. CHEMICAL PROTECTION ChemMax® 3 barrier film is soft and durable while providing superior protection from both ChemMax® 3 chemicals and chemical warfare agents, all while backed by the PermaSURE database of 4,000+ chemicals. ChemMax® 2 ChemMax® 2 fabric is built with the proven protection of Saranex 23P barrier film to provide superior and economical chemical protection. ChemMax® 1 fabric is comprised of a polyethylene (PE) barrier film and a continuous filament ChemMax® 1 polypropylene nonwoven fabric. Lightweight and durable protection for most industrial acid and base chemicals. FLAME RESISTANT PROTECTION Pyrolon® CBFR Pyrolon® CBFR offers the highest level of chemical protection for harsh environments that also require Flame Resistant apparel due to flash fire concerns. Pyrolon® CRFR Pyrolon® CRFR fabric utilizes a 2.5 mil proprietary FR barrier film to provide chemical protection for primary FR/AR garments that won’t melt or drip in a flash fire scenario. Pyrolon® Plus 2 provides highly breathable, secondary FR protection, to keep primary FR/AR Pyrolon® Plus 2 garments free from contamination by dirt, grease, oil, hydraulic fluid and other dry particulate, aerosol and light liquid hazards. MicroMax®VP garments are specifically tailored for protection from the risk of blood, body fluids MicroMax® VP and bloodborne pathogens. ASTM F1670/F1671 for blood and viral and designed with no exposed seams or points for liquid penetration on the forward-facing portion of the garment. DISPOSABLE PROTECTION The MicroMax® family of fabrics are all based upon a spunbond polypropylene layer with a MicroMax® laminated microporous film. Dry particulate filtration to 1.0 micron and passes ASTM F1670/F1671 for bloodborne pathogens make the MicroMax line ideal choice blood, grease, paint, pesticides and light chemical splash. SafeGard™ fabric is a layering of Spunbond-Meltblown-Spunbond polypropylene filaments to SafeGard™ provide breathable protection against aerosols and light liquids, as well as particle filtration down to 10.0 microns. ZoneGard® ZoneGard® fabric is lightweight, highly breathable polypropylene fabric. Ideal protection for dirt, dust and other dry particulates. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 11
Lakeland® Brand Protection Levels and Seam Styles General Protection Aerosol/Spray Product Hazardous Non- Welding, Non- Paint, Applications Dirt, Oil and Dry Hazardous Cutting and Hazardous Hazardous Dry Particles Flammable Grease Environment Particulate Liquids Grinding Liquids Liquids MicroMax® NS l l l l l l MicroMax® NS Cool Suit l l l l l l MicroMax® l l l l l l MicroMax® VP CleanMax® SafeGard™ SMS l l l l l l Economy SMS l l l l l Pyolon® Plus 2 * l l l l l l ZoneGard® Polypropylene l l Pyrolon® CRFR * l l l l l Pyrolon® CBFR l l l ChemMax® 1 l l l l l ChemMax® 2 l l l ChemMax® 3 l ChemMax® 4 Plus Interceptor® Plus** * Must be worn over thermally protective clothing, such as flame resistant cottons, aramids or mono acrylics. ** Interceptor meets the requirements of NFPA 1991 limited flash fire for escape only option. Product Seam Availability The Seam You Choose is Product Serged Seam Bound Seams Heat Sealed Seams Heat Sealed Plus Seams Determined By MicroMax® NS MicroMax® NS Cool Suit l l Your Work Environment MicroMax® MicroMax® VP l and Your Potential Risk of Hazard Exposure! l CleanMax® l SafeGard™ SMS l Economy SMS l Pyolon® Plus 2 l ZoneGard® Polypropylene l Pyrolon® CRFR l Pyrolon® CBFR l ChemMax® 1 l l l ChemMax® 2 l l ChemMax® 3 l ChemMax® 4 Plus l Interceptor® Plus l l 12
LAKELAND DISPOSABLE / CHEMICAL PPE Chemical Splash Hazmat Critical Environment / Biohazard Low High Flammable Hazmat, Hazmat Bloodborne Waste Water Flash Fire Exposure, Exposure, Paint Booth Clean Room Liquids Maritime Non-Certified Pathogens Treatment Chemical Low Risk High Risk l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l Serged Seam Bound Seam Heat Sealed Seam Heat Sealed Plus Seam Low Risk of Moderate Risk of High Risk of Maximum Risk of Hazardous Exposure Hazardous Exposure Hazardous Exposure Hazardous Exposure A serged seam joins two pieces A bound seam joins two pieces A heat sealed seam is sewn This is the ultimate and of material with a thread that of material with an overlay of and then sealed with a heat strongest seam that Lakeland® interlocks. This is an economical similar material and is chain activated tape. This method offers. The seam is sewn stitching method for general stitched through all layers provides liquid proof seams, and then heat sealed on the applications. This stitching for a clean finished edge. This and is especially useful for Level outside and inside to offer the method is generally not used provides increased holdout of A and B chemical protective highest strength and chemical for chemical protective clothing. liquids and dry particulates. clothing. resistance. It is more commonly found on disposable clothing where dry particulates are a concern. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 13
Lakeland® Brand Apparel Selection Guide > 1micron Type 5 – SafeGard™ SMS Hazardous Is the particle size Dry greater or less No Type 5 – MicroMax® NS Particles than 1.0 micron? Does the application < 1 micron require a greater comfort level? Yes Type 5 – MicroMax® NS Cool Suit Infectious Is the hazard a blood-borne pathogen, biologically contaminated aerosol, Type 6 and Type 5 – MicroMax® VP, MicroMax® NS Agents dry microbial or body fluid? and MicroMax® Type 6 – SafeGard™ SMS, Aerosol MicroMax® NS/ NS Cool Suit, Is the liquid an aerosol ChemMax® 1 and ChemMax® 2*** Low or spray? Liquid Is the exposure level Spray Type 4* – (sealed seam products) Light Hazards low or high? ChemMax® 1 and ChemMax® 2 Is protection required High from light or heavy splash? Type 3* – (sealed seam products) Heavy ChemMax® 1, ChemMax® 2, ChemMax® 3 and ChemMax® 4 Plus We recommend garments No made of FR Cotton or FR Aramid fabric Is there a dry No particle hazard? Yes Type 5 – Pyrolon® Plus 2** Flash Fire/ In addition to Flash Fire, Chemical do you need chemical Hazards protection from liquid spray? Liquid Spray Type 6 – Pyrolon® Plus 2** Is the liquid a liquid spray Yes or liquid splash? Type 4* and Type 3* – Liquid Splash Pyrolon® CRFR, Pyrolon® CBFR** Does your application Gas/Vapor require an air-tight Type 1 Interceptor® Plus, EPA Level A Gas-Tight Suit Hazards positive pressure suit? Designation * For details on Type 4 and Type 3 solutions, contact your Lakeland® Sales Representative or call Customer Service at 800-645-9291. ** Must be worn over thermally protective clothing, such as fire resistant cottons, aramids or modacrylics. *** Refer to permeation data for which ChemMax® is indicated for a given hazard. 14
LAKELAND DISPOSABLE / CHEMICAL PPE ISO 16602 SafeGard™ SMS Page 21 What does garment “Type” stand for? MicroMax® NS Page 16 The ISO 16602 standard is based upon a system of Types and Classes. The MicroMax® NS garment “Type” designation is based upon Cool Suit the physical state of the hazard. Page 18 LOWEST PROTECTION Limited protection MicroMax® VP MicroMax® NS MicroMax® against liquid mist Page 4 Page 18 Page 20 MicroMax® NS Protection SafeGard™ SMS MicroMax® NS ChemMax® 1 ChemMax® 2 Cool Suit against airborne Page 21 Page 16 Page 24 Page 26 Page 18 solid particulate chemicals ChemMax® 1 ChemMax® 2 Page 24 Page 26 ChemMax® 4 ChemMax® 1 ChemMax® 2 ChemMax® 3 Plus Page 24 Page 26 Page 38 Protection against Page 40 liquid aerosols Protection against Pyrolon® pressurized liquid Plus 2 chemicals Page 29 Pyrolon® Plus 2 Page 29 Non gas-tight Pyrolon® CRFR Pyrolon® CBFR protection Page 30 Page 32 Gas-tight protection Interceptor® Plus against chemicals Page 42 and vapors and toxic particles HIGHEST PROTECTION This is a general guide to selecting garments only and should not be used as the definitive or only tool in garment selection. It is the responsibility of the user to select garments or products which are appropriate for each intended use and which meet all specified government and industry standards. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 15
MICROMAX NS ® MicroMax® NS Applications Light Chemical Handling Microporous protection from Sandblasting/Abrasives dirt, grease, grime and light Dirt, Oil and Grease chemical splash! Serged Seam MicroMax® NS Features: MicroMax® NS Fabric Physical Properties • Economical Physical Property Test Method Units Test Results • Lightweight Basis Weight ASTM D3776 oz/y2 1.55 oz/y2 • Features high MVTR (Moisture Vapor Transmission Rate) Grab Tensile MD ASTM D5034 lbs. 22.0 lbs. • Protection from dry particulates and light liquid splash Grab Tensile XD ASTM D5034 lbs. 14.0 lbs. Trapezoidal Tear MD ASTM D1117 lbs. 9.0 lbs. Trapezoidal Tear CD ASTM D1117 lbs. 5.8 lbs. Ball Burst ASTM D3787 lbs. 19.0 lbs. Air Permeability ASTM D737 cfm
LAKELAND DISPOSABLE / CHEMICAL PPE MicroMax® NS Configurations Lab Coat Lab Coat Lab Coat Lab Coat Frock Frock Shirt Pants CTL101 CTL104 CTL112 CTL140 CTL190 CTL191 CTL201 CTL301 • Snap closure • Snap closure • Snap closure • Snap closure • Mandarin collar • Mandarin collar • Snap closure • Elastic waist • 2 pockets • 2 pockets • No pockets • No pockets • 5 snaps • Zipper closure • Long sleeves Sizes: S – 5X • Long sleeve • Long sleeve • Long sleeve • Long sleeves • No pockets • No pockets Sizes: S – 5X Case Pack: 50 Sizes: S – 5X • Elastic wrists • Elastic wrists Sizes: S – 5X • Elastic wrists • Elastic wrists Case Pack: 50 Case Pack: 30 Sizes: S – 5X Sizes: S – 5X Case Pack: 30 Sizes: S – 5X Sizes: S – 5X Case Pack: 30 Case Pack: 30 Case Pack: 30 Case Pack: 25 Coverall Coverall Coverall Coverall Apron Apron CTL412 CTL414 CTL417 CTL428 CTL601 CTL603 • Zipper closure • Zipper closure • Zipper closure • Zipper closure • Sewn ties • Sewn ties Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood Sizes: 28”w x 36” l Sizes: 28”w x 44”l Case Pack: 25 • Boots • Elastic ankles • Elastic wrists Case Pack: 100 Case Pack: 100 Elastic wrists Sizes: S – 5X • Elastic ankles Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 25 Case Pack: 25 Hood Sleeve Shoe Cover Boot Cover Shoe Cover Boot Cover CTL713 CTL850P-18 CTL901P CTL903P CTL904P CTL905P • Elastic face • Elastic ends 901NSP (non-skid) 903NSP (non-skid) • Vinyl sole • Elastic top • Covers shoulders Sizes: 18” length • Elastic ankles • Elastic top Sizes: S/M, L/XL, 2X • 17” high • One size Case Pack: 100 pair • Style 901 – standard version • 17” high Case Pack: 200 pair • Vinyl sole Case Pack: 250 • Style 901NS – gray non-skid • Style 903 – standard version Sizes: S/M, L/XL, 2X version • Style 903NS – gray non-skid Case Pack: 200 pair Sizes: S/M, L/XL, 2X version Case Pack: 200 pair Sizes: S/M, L/XL, 2X Case Pack: 200 pair There is no detectable presence/absence of silicone using FTIR analysis for MicroMax NS fabric or other materials used in MicroMax NS garments such as elastic wrists and ankles, or zippers. All test method acceptance criteria were met. Test method STP0021 Rev 06 was performed in compliance with US FDA good manufacturing practice (GMP) regulations 21 CFR Parts 210, 211 and 820. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 17
MICROMAX NS ® MicroMax® NS Cool Suit Applications COOL SUIT Paint Spray Sandblasting/Abrasives Power Washing Breathable back panel maximizes comfort! Serged Seam MicroMax® NS Cool Suit Features: MicroMax® NS Cool Suit Configurations • SMS back panel increases breathablity and and provides a barrier to particulates and aerosol mist • Elastic back waist provides improved comfort • Front and sides material provides protection from dirt, liquids and light chemical splash • Storm flap over zipper protects against splashes Attached hood fits perfectly around most respirators Breathable back panel material keeps you cool Coverall Coverall COL412 COL428 • Zipper closure • Zipper closure MicroMax® NS Cool Suit Sizes: S – 5X Case Pack: 25 • Attached hood • Elastic wrists is the perfect solution for • Elastic ankles Sizes: S – 5X spray applications! Case Pack: 25 Elastic cuffs on sleeves and ankles helps seal out spray-over The Cool Suit breathable back panel provides efficient cooling while the front and sides offer light barrier protection from liquids and splash 18
LAKELAND DISPOSABLE / CHEMICAL PPE MicroMax® NS Cool Suit ... All-In-One Protection and Comfort! Protective hood Front and sides composed of microporous film SMS over a polypropylene Barrier substrate provides barrier protection Storm flap over zipper protects against splashes SMS back panel increases breathability and particulate barrier Elastic back waist provides improved comfort MicroMax® NS Cool Suit Fabric Physical Properties MicroMax® NS Cool Suit Fabric ASTM F903 Penetration Data Physical Property Test Method Units Test Results Basis Weight ASTM D3776 oz/y2 1.85 oz/y2 Chemical Tested Concentra- Test Test tion % Time – Results Strip Tensile MD ASTM D5035 lbs. 11.3 lbs. Minutes Strip Tensile XD ASTM D5035 lbs. 6 lbs. Diazinon (Roundup) 100% 60 Pass Tensile Strength MD ASTM D5034 lbs. 24.4 lbs. Motor Oil-40 wt. 100% 60 Pass Tensile Strength XD ASTM D5034 lbs. 16.2 lbs. Bleach-household 100% 60 Pass Trap/Tear MD ASTM D1117 lbs. 10.8 lbs. Isocyanate Based Paint 100% 60 Pass Trap/Tear XD ASTM D1117 lbs. 5.4 lbs. Sodium Hydroxide 50% 60 Pass Ball Burst ASTM 3787 lbs. 25.1 lbs. Sodium Hypochlorite 10% 60 Pass Taber Abrasion ASTM 3884 cycles 1062 cycles Blood Challenge Fluid Assay Pass Liter – 3.20 x Results Mocon-Breathability 5031 108 (PFU/mL) PFU/mL Air Permeability ASTM D737 cfm/ft2
MICROMAX ® MicroMax® Applications Dirt, Oil and Grease Added durability for the Hazardous Dry Particulate toughest environments Non-hazardous Liquids Serged Seam MicroMax® Features: MicroMax® Fabric Physical Properties • Rip-stop nylon scrim adds strength and durability Physical Property Test Method Units Test Results • Liquid under pressure will not pass through fabric Basis Weight ASTM D3776 oz/y2 2.10 oz/y2 • Ideal for Isocyanate paint Grab Tensile MD ASTM D5034 lbs. 32.4 lbs. • Proven protection for Pesticide Spraying Grab Tensile XD ASTM D5034 lbs. 32.6 lbs. Trapezoidal Tear MD ASTM D5733 lbs. 5.1 lbs. Trapezoidal Tear CD ASTM D5733 lbs. 6.2 lbs. Surface Resistance EN1149 Ω Pass MicroMax® Configurations MicroMax® Fabric ASTM F903 Penetration Data Chemical Tested Concentra- Test Test tion % Time – Results Minutes Diazinon (Roundup) 100% 60 Pass Motor Oil-40 wt. 100% 60 Pass Bleach-household 100% 60 Pass Isocyanate Based Paint 100% 60 Pass Sodium Hydroxide 50% 60 Pass Sodium Hypochlorite 10% 60 Pass Blood Challenge Fluid Assay Pass Liter – 3.20 x Results Coverall Coverall Coverall Coverall 108 (PFU/mL) PFU/mL TG412 TG414 TG417 TG428
LAKELAND DISPOSABLE / CHEMICAL PPE SafeGard ™ SafeGard™ Applications Dirt, Oil and Grease Lightweight, breathable protection Aerosol Mist from 3 tough layers Serged Seam SafeGard™ Features: SafeGard™ Fabric Physical Properties • Deluxe pattern coveralls feature Physical Property Test Method Units Test Results – hip pocket Basis Weight ASTM D3776 oz/y2 1.5 oz/y2 – chest pocket Grab Tensile MD ASTM D5034 lbs. 25 lbs. – elastic back Grab Tensile XD ASTM D5034 lbs. 20 lbs. • Aerosol mist protection Trap Tear MD ASTM D5733 lbs. 7.9 lbs. • Ideal for dry particulate Trap Tear XD ASTM D5733 lbs. 6.7 lbs. • Breathable Protection SafeGard™ Configurations Lab Coat Coverall Coverall Coverall Coverall Most SafeGard™ C8101 C8412 C8414 C8417 C8428 SMS garments are • Snap closure • Zipper closure • Zipper closure • Zipper closure • Zipper closure available in white • 2 pockets • Attached hood • Elastic wrists • Attached hood or Sky Blue. Sizes: S – 5X For Sky Blue, add • Long sleeve Case Pack: 25 • Boots • Elastic ankles • Elastic wrists a “B” at the end of • White only • Elastic wrists Sizes: S – 5X • Elastic ankles the style number. Sizes: S – 5X Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 30 Case Pack: 25 Case Pack: 25 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 21
SafeGard ECONOMY ™ SafeGard™ Economy Applications Dirt, Oil and Grease SafeGard™ Protection - Hazardous/Non-hazardous Economical Design Dry Particulates Aerosol Mist Serged Seam SafeGard™ Economy Features: SafeGard™ Economy SMS Fabric Physical Properties • SafeGard Protection - Ideal for dry particulate and light Physical Property Test Method Units Test Results aerosol mist Basis Weight ASTM D3776 oz/y2 1.5 oz/y2 • Standard coverall design Grab Tensile MD ASTM D5034 lbs. 25 lbs. • Available in White or Blue Grab Tensile XD ASTM D5034 lbs. 20 lbs. Trap Tear MD ASTM D5733 lbs. 7.9 lbs. Trap Tear XD ASTM D5733 lbs. 6.7 lbs. SafeGard™ Economy Configurations Coverall Coverall Coverall Coverall All Economy SMS E8412 E8414 E8417 E8428 garments are • Zipper closure • Zipper closure • Zipper closure • Zipper closure available in White • Attached hood • Elastic wrists • Attached hood or Blue. Sizes: S – 5X For Blue, add a Case Pack: 25 • Boots • Elastic ankles • Elastic wrists “B” at the end of • Elastic wrists Sizes: S – 5X • Elastic ankles the style number Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 25 Case Pack: 25 22
LAKELAND DISPOSABLE / CHEMICAL PPE ZONEGARD ® ZoneGard® Applications Dirt, Oil and Grease The Breathable, Lightweight Protection of Polypropylene Serged Seam ZoneGard® Features: ZoneGard® Fabric Physical Properties • Highly breathable Physical Property Test Method Units Test Results • Great for dirty, grimy environments Basis Weight ASTM D3776 oz/y2 1.25 oz/y2 • Economical ZoneGard® Configurations Coverall Coverall Coverall Coverall Sleeve Shoe Cover Bouffant Hat ZoneGard® cover- C2412 C2414 C2417 C2428 C2850P-18 C2901P 801-21 alls are available • Zipper closure • Zipper closure • Zipper closure • Zipper closure • Elastic ends • Elastic ankles • Bouffant hat in White or Navy. Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood Sizes: 18” length Sizes: S/M, L/XL, 2X Sizes: 21” For Navy, add an “N” to the end of Case Pack: 25 • Boots • Elastic ankles • Elastic wrists Case Pack: 100 pair Case Pack: 200 pair Case Pack: 100 the style number • Elastic wrists Sizes: S – 5X • Elastic ankles Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 25 Case Pack: 25 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 23
CHEMMAX 1 ® ChemMax® 1 Applications Waste Water Treatment Your First Level of Chemical High and Low PH Chemicals Protection Hazardous Liquid Spray Serged Seam Bound Seam Heat Sealed Seam ChemMax® 1 is constructed with a unique polyethylene barrier ChemMax® 1 provides economical, lightweight protection film and a continuous filament polypropylene nonwoven fabric. against most industrial acid and base chemicals. Bloodborne ChemMax® 1 garments bar many harmful contaminants from pathogen and viral protection make it a cost-effective option penetrating to inner clothing. Available with serged, bound and for waste water treatment facilities. ChemMax® 1 also meets the sealed seams for scalability. requirements of EN-1149 for Electrostatic Properties. ChemMax® 1 Coveralls Coverall Coverall Coverall Coverall Coverall Coverall Coverall Coverall C1S412Y C1S414Y C1S417Y C1S428Y C1T110Y C1T130Y C1T150Y C1T151Y Serged Seam Serged Seam Serged Seam Serged Seam Sealed Seam Sealed Seam Sealed Seam Sealed Seam • Zipper with storm C1B414Y C1B417Y C1B428Y • Collar • Zipper with storm • Zipper with storm • Respirator-fit hood flap Bound Seam Bound Seam Bound Seam • Storm flap over flap flap • Storm flap over Sizes: S – 5XL • Zipper with storm • Zipper with storm • Zipper with storm zipper. • Elastic face • Attached hood zipper Case Pack: 25 flap flap flap • Elastic wrists • Elastic wrists • Elastic wrists • Elastic face and • Attached hood • Elastic wrists • Attached hood • Elastic ankles • Elastic ankles • Attached boots wrists • Attached boots • Elastic ankles • Elastic wrists Sizes: S – 5XL Sizes: S – 5XL Sizes: S – 5XL • Attached boots • Elastic wrists Sizes: S – 5XL • Elastic ankles Case Pack: 6 Case Pack: 6 Case Pack: 6 Sizes: S – 5X Sizes: S – 5XL Case Pack: 25 Sizes: S – 5XL Case Pack: 6 Case Pack: 25 Case Pack: 25 24
LAKELAND DISPOSABLE / CHEMICAL PPE ChemMax® 1 Brand Features ChemMax® 1 Fabric Physical Properties Infectious Disease and Bloodborne Pathogen Property Test Method Units Test Results tested (sealed seam configuration) Basis Weight ASTM D3776 oz./sq. yd 2.29 Grab Tensile MD pounds 35 Available in multiple seam configurations Grab Tensile XD ASTM D5034 pounds 27 Trapezoidal Tear MD pounds 13.8 Excellent Protection for High and Low Trapezoidal Tear XD ASTM D5733 pounds 14.2 PH Chemicals (Acids and Bases) Ball Burst ASTM D751 pounds 25.5 Passes ASTM D6978 Fentanyl Permeation Data for ASTM Recommended List of Chemicals for Evaluating Protective Clothing Materials (ASTM F1001) CAS Physical Normalized Challenge Chemical Number State Breakthrough ChemMax® 1 Configurations Acetone 67-64-1 Liquid >480 Acetonitrile 75-05-8 Liquid >480 Ammonia Gas 7664-41-7 Gas imm. 1,3-Butadiene Gas 106-99-0 Gas imm. Carbon Disulfide 75-15-0 Liquid >480 Chlorine Gas 7782-50-5 Gas imm. Dichloromethane 75-09-2 Liquid imm. Diethylamine 109-89-7 Liquid imm. Dimethyl Formamide 68-12-2 Gas imm. Ethyl Acetate 141-78-6 Liquid imm. Ethylene Oxide Gas 75-21-8 Gas >480 n-Hexane 110-54-3 Liquid imm. Gown Apron Apron Hydrogen Chloride Gas 7647-01-0 Gas imm. C1S527Y C1S650Y C1B657Y Methanol 67-56-1 Liquid imm. • Open back • Sewn ties • Long sleeves Methyl Chloride Gas 74-87-3 Gas imm. • Long sleeve Sizes: 28” x 36” • Waist ties • Elastic wrists Case Pack: 100 Sizes: 28” x 53” Nitrobenzene 98-95-3 Liquid 45 minutes • Sewn ties Case Pack: 50 Sodium Hydroxide 50% 1310-73-2 Liquid >480 Sizes: 30” x 40” Sulfuric Acid, 96% 7664-93-9 Liquid 315 minutes Case Pack: 6 Tetrachloroethylene 127-18-4 Liquid imm. Tetrahydrofuran 109-99-9 Liquid imm. Toluene 108-88-3 Liquid imm. For Fentanyl Test Results using ASTM D6978 refer to page 10 ND = None Detected > = greater than L = liquid G = gas Numbers reported are averages of samples tested by the ASTM F739 test method. Sample results vary and therefore averages for these results are reported. Warnings: 1. ChemMax® 1 is not flame resistant and should not be used around heat, flame sparks, or in Sleeve Shoe Cover Boot Covers potentially flammable or explosive environments. C1S850YP-18 C1S901YP C1S903YP 2. Garments made of ChemMax® 1 should have slip resistant or anti-slip materials on the • Elastic ends • Elastic ankles Serged Seam outer surface of boots, shoe covers or other garment surfaces in conditions where slipping Sizes: 18” length Sizes: S/M, L/XL, 2X • Elastic top could occur. Case Pack: 100 pair Case Pack: 200 pair • 17” high Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per- Sizes: S/M, LG/XL, 2X formed on fabric samples only, not finished garments. Sources for all test data are independent Case Pack: 200 pair laboratory conditions and not actual use conditions. 1 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 25
CHEMMAX 2 ® ChemMax® 2 Applications Chemical Mixing and Handling Environmental Clean Up Hazardous Material Remediation Bound Seam Heat Sealed Seam Quality, Value, Durability with the Proven Protection of Saranex® 23P Barrier Film ChemMax® 2 is useful in protecting against hazardous chemi- The unparalleled strength and softness features a Saranex® 23P cals and contaminants found in the work place and is a superior film on two layers of a unique bi-component spunbond and economical chemical protective suit developed using the nonwoven substrate which provides protection for chemical knowledge and expertise that you have come to expect from mixing and handling, environmental clean-up, hazardous mate- Lakeland®. rials remediation and response, pharmaceutical manufacturing, spray painting and general industry. ChemMax® 2 Coveralls Coverall Coverall Coverall Coverall Coverall Coverall Coverall C2B414 C2B417 C2B428 C2T110 C2T132 C2T151 C2T165 Bound Seam Bound Seam Bound Seam Sealed Seam Sealed Seam Sealed Seam Sealed Seam • Zipper with storm • Zipper with storm • Zipper with storm • Collar • Respirator fit hood • Respirator fit hood • Respirator fit hood flap flap flap • Storm flap over • Zipper with storm • Zipper with storm • Storm flap over • Attached hood • Elastic wrists • Attached hood zipper. flap flap zipper • Attached boots • Elastic ankles • Elastic wrists • Elastic wrists • Elastic face • Attached hood • Attached boots with • Elastic wrists Sizes: S – 5XL • Elastic ankles • Elastic ankles • Elastic wrists • Elastic wrists boot flaps Sizes: S – 5XL Case Pack: 12 Sizes: S – 5XL Sizes: S – 5XL • Elastic ankles • Attached boots • Velcro® closure over Case Pack: 12 Case Pack: 12 Case Pack: 6 Sizes: S – 5XL Sizes: S – 5XL zipper Case Pack: 6 Case Pack: 6 Sizes: S – 5XL Case Pack: 6 26
LAKELAND DISPOSABLE / CHEMICAL PPE ChemMax® 2 Fabric Physical Properties Property Test Method Units Test Results ChemMax® 2 Brand Features Basis Weight ASTM D3776 oz./sq. yd 4.3 Grab Tensile MD pounds 47 ASTM D5034 Moderate to high level chemical protection Grab Tensile XD pounds 33.9 Trapezoidal Tear MD pounds 29.95 Bound and sealed seam configurations Trapezoidal Tear XD ASTM D5733 pounds 12.47 Ball Burst ASTM D751 pounds 48 2-layer (PP/PE) substrate Surface Resistance EN1149 Ω Pass 20% stronger than competitive fabrics Permeation Data for ASTM Recommended List of Chemicals for Evaluating Protective Clothing Materials ChemMax® 2 Configurations (ASTM F1001) Physical Normalized Challenge Chemical CAS Number State Breakthrough Acetone 67-64-1 Liquid >480 Acetonitrile 75-05-8 Liquid 390 Ammonia Gas 7664-41-7 Gas imm. 1,3-Butadiene Gas 106-99-0 Gas >480 Carbon Disulfide 75-15-0 Liquid imm. Chlorine Gas 7782-50-5 Gas >480 Dichloromethane 75-09-2 Liquid imm. Diethylamine 109-89-7 Liquid 165 Dimethyl Formamide 68-12-2 Gas >480 Apron Apron Boot Covers C2B657 C2T730 C2T740P Ethyl Acetate 141-78-6 Liquid 21 Bound Seam Sealed Seam Sealed Seam Ethylene Oxide Gas 75-21-8 Gas >480 • Long sleeves • Long sleeves • Elastic top n-Hexane 110-54-3 Liquid >480 • Waist ties • Elastic wrists • 17” high (extends over Hydrogen Chloride Gas 7647-01-0 Gas >410 Sizes: 28” x 53” • Hook and loop straps calf Methanol 67-56-1 Liquid >480 Case Pack: 50 at neck Sizes: S/M, LG/XL, 2X • Material ties in back Case Pack: 12 pair Methyl Chloride Gas 74-87-3 Gas >480. Sizes: 28” x 53” Nitrobenzene 98-95-3 Liquid 45 Case Pack: 12 Sodium Hydroxide 50% 1310-73-2 Liquid >480 Sulfuric Acid, 98% 7664-93-9 Liquid >480 Tetrachloroethylene 127-18-4 Liquid >480 Tetrahydrofuran 109-99-9 Liquid imm. Toluene 108-88-3 Liquid imm. ND = None Detected > = greater than L = liquid G = gas Numbers reported are averages of samples tested by the ASTM F739 test method. Sample results vary and therefore averages for these results are reported. Warnings: 1. ChemMax® 2 is not flame resistant and should not be used around heat, flame sparks, or in Sleeve Level B Encapsulated Level B Encapsulated potentially flammable or explosive environments. C2B850P-18 Suit Suit 2. Garments made of ChemMax® 2 should have slip resistant or anti-slip materials on the Bound Seam C2T400 - Flat Back C2T450 - outer surface of boots, shoe covers or other garment surfaces in conditions where slipping • Elastic ends • Rear entry Expanded Back could occur. Sizes: 18” length • Flat back • Rear entry Case Pack: 100 pair • 48” zipper • Expanded back Note: Chemical Resistance Data is in accordance with ASTM F-739 test method. Testing is per- • Storm flap • 48” zipper formed on fabric samples only, not finished garments. Sources for all test data are independent 2 • 20 mil Vinyl face shield • Double storm flap with laboratory conditions and not actual use conditions. • Elastic wrists hook and loop • 1 exhaust port with • 20 mil Vinyl face shield shroud • Elastic wrists • Air tube inlet • 2 exhaust ports with • Attached sock boots with shroud boot flap • Air tube inlet • Suit is not gas/vapor tight • Attached sock boots with Sizes: M – 4XL boot flap ChemMax® 2 Bound Seam Case Pack: 3 • Suit is not gas/vapor tight Sizes: M – 4XL coveralls now feature Case Pack: 3 blue binding for easier identification. 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 27
DISPOSABLE FR Why Wear an FR Disposable Over Your Primary FR Clothing? Secondary Primary FR Disposable FR Protective Flame resistant disposables are intended to provide liquid and Protection Garment dust protection when worn over a primary thermal protective garment. To keep your new, primary FR clothing clean and free of contaminants, make sure that you are selecting the correct disposable garment for your application. Standard disposables are made from polypropylene or polyeth- ylene (or both). These are thermoplastic derivatives of oil, both of which are flammable materials that will ignite, melt and burn. Any fabric that melts and drips in the event of an electric arc or flash fire should not be worn over primary FR garments. Repellency is also a critical attribute to consider when selecting an FR disposable garment. Understand the repellency perfor- mance of your disposable garment to ensure that possible flam- mable contaminants are not soaking through to your primary FR clothing. Make sure that your FR disposable has the repellen- cy to keep grease, hydraulic fluid and other harmful contami- nants from compromising your primary protective clothing. Don’t be misled by others citing the NFPA 701 curtain and drapery standard for their flammability performance. All Pyro- lon® products are designed to be worn over primary protective flame resistant clothing, are tested to ASTM F1930 and meet the NFPA 2113 requirements for section 5.1.9. Know the Facts! Get the FR protection you demand. Lakeland® has produced a video which demonstrates the superiority of Pyrolon® Plus 2 vs. competing fabrics. Don’t settle for substandard FR PPE that can be downright dangerous to wear. Visit the Lakeland® website at www.lakeland.com, or scan the QR code on this page. lakeland.com/us/pyrolon-alt 28
LAKELAND DISPOSABLE / CHEMICAL PPE PYROLON PLUS 2 ® Pyrolon® Plus 2 Applications Dirt, Oil and Grease Hazardous Dry Particulates Perfect for use over thermally protective and Flammable Environment arc protective clothing! Sewn Seam • Second generation Pyrolon® Plus 2 offers wet or dry strength Pyrolon® Plus 2 Fabric Physical Properties superior to that provided by other traditional Flame Resistant disposables Physical Property Test Method Units Test Results • Meets the NFPA 2113 requirements for section 5.1.9. Basis Weight ASTM D3776 oz./sq. yd 2.4 oz/y2 • ANSI/ISEA 203 Certified Grab Tensile MD ASTM D5034 lbs. 31.0 lbs. • Pyrolon® Plus 2 is breathable, making this a cool and comfortable garment to wear. Grab Tensile XD ASTM D5034 lbs. 20.0 lbs. Trapezoidal Tear MD ASTM D5733 lbs. 4.5 lbs. Pyrolon® Plus 2 can be used in work environments where hazardous or non-hazardous contaminants may be present. Trapezoidal Tear CD ASTM D5733 lbs. 5.6 lbs. Pyrolon® Plus 2 is certified to the ANSI/ISEA 203-2018 American Air Permeability ASTM D737 cfm 52 cfm National Standard for Secondary Single-Use Flame Resistant Char Length MD ASTM D6413 inches 3.70 inches Protective Clothing for Use Over Primary Flame Resistant Protective Char Length XD ASTM D6413 inches 3.70 inches Clothing. Ignition Point – degrees F 1000˚ F Surface Resistance EN1149 Ω Pass Pyrolon® Plus 2 Configurations Coverall Coverall Coverall Coverall Lab Coat Hood Boot Cover Pyrolon® Plus2 7412 7414 7417 7428 7101 7713B 7903BP coveralls and 7412B 7414B 7417B 7428B 7101B • Elastic face • Elastic top lab coats are • Zipper closure • Zipper closure • Zipper closure • Zipper closure • Snap closure • Covers shoulders • 17” high available in White or Blue. For Blue, Sizes: S – 5X • Attached hood • Elastic wrists • Attached hood • 2 pockets • One size • Available in Blue add an “B” to the Case Pack: 25 • Boots • Elastic ankles • Elastic wrists • Long sleeve • Available in Blue only end of the style • Elastic wrists Sizes: S – 5X • Elastic ankles Sizes: S – 5X only Sizes: S/M, L/XL, 2X number Sizes: S – 5X Case Pack: 25 Sizes: S – 5X Case Pack: 30 Case Pack: 250 Case Pack: 200 pair Case Pack: 25 Case Pack: 25 1-800-645-9291 | 256-350-3873 | lakeland.com | info@lakeland.com 29
PYROLON CRFR ® Pyrolon® CRFR Applications Petrochemical Chemical Resistance and Flammable Liquid Handling Flame Resistance in one Disposable Drug Lab Investigation Protective Garment Heat Sealed Seam Pyrolon CRFR is the Chemical Resistant and Flame Resistant Pyrolon CRFR is designed to be worn over Primary FR/AR Pro- disposable option designed to protect your Primary FR and ARC tective Clothing for environments where flash fire is a concern. Rated Garments when chemical splash is a concern. Pyrolon Utilizing Pyrolon CRFR when both chemical splash and flash CRFR garments bar contaminating flammables like paint, oil and fire are a concern helps the wearer meet the NFPA 2113 require- grease, hazardous liquids and contaminants, and dry particu- ments for section 5.1.9. lates from penetrating to inner Primary Protective Garments, potentially saturating them with flammable substances. Pyrolon® CRFR Coveralls Pyrolon® CRFR Brand Features: Combines Chemical Resistance with Flame Resistance Does Not Melt or Drip Meets the NFPA 2113 Coverall 51100 Coverall 51110 Coverall 51130 Coverall 51150 Coverall 51166 Requirements for Section 5.1.9 • Collar • Collar • Hood • Hood • Respirator fit hood • Storm flap over • Storm flap over • Storm flap over • Storm flap over • Storm flap/hook Penetration Data for ASTM F903 zipper zipper zipper zipper and loop closure • Open wrists • Elastic wrists • Elastic face • Elastic face and over zipper Standard Chemicals • Open ankles • Elastic ankles • Elastic wrists and wrists • Elastic face, wrists • Hemmed cuff Sizes: S - 5XL ankles • Attached boots and ankles Sizes: S - 5XL Case Pack: 6 Sizes: S - 5XL Sizes: S - 5XL Sizes: S – 5XL Case Pack: 6 Case Pack: 6 Case Pack: 6 Case Pack: 6 30
You can also read