2021 AMUG Conference May 2-6, 2021 - PRELIMINARY AS OF MARCH 17, 2021 Subject to change - Additive Manufacturing Users Group
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
2021
AMUG Conference
May 2-6, 2021 Hilton Orlando
Orlando, Florida, USA
PRELIMINARY AS OF MARCH 17, 2021
Subject to change
TABLE OF CONTENTS
GENERAL INFORMATION 03
FEATURED SPEAKERS 04
AGENDA AT-A-GLANCE 04-05
MOBILE APP 06
BOARD OF DIRECTORS ELECTIONS 07
HILTON ORLANDO OVERVIEW 08-09
PRE-CONFERENCE TRAINING AND 10
CERTIFICATION
PROGRAM SUNDAY-THURSDAY 11-19
AMUGEXPO 20-21
FLOOR PLANS 22-23
BOARD OF DIRECTORS / COMMITTEES 24-25
SPONSORS 26-27
Front Cover:
(Right) Erika Berg of Carbon - digitally printed helmet liner components and Riddell’s SpeedFlex Precision Diamond Helmet;
(Left) Maddie Frank of University of Wisconsin - Cello, and (Center) Bill Braune/Met-L-Flo - Master Chief reproduction.
AMUG Conference | May 2-6, 2021
General Information
AMUG CONFERENCE OFF-SITE EVENT AND DINNER
AMUG Conerence begins Sunday at 4pm and concludes Thursday night at 10:00pm. Conference attendees have full access to all conference activities including the AMUG
See Agenda at a Glance page 4-5. Tuesday-night Off-Site Event and Dinner (surprise location!). Conference attendees
have the option of bringing a guest for an additional fee, which can be purchased at the
REGISTRATION AND BADGE PICKUP registration desk.
REGISTRATION HOURS
Off-Site Event and Dinner: Tuesday, May 4
Sunday, May 2: 10:00am - 8:00pm
Board Buses: 6:00pm
Monday, May 3: 7:00am - 8:00pm
Buses Leave: 6:30pm promptly
Tuesday, May 4: 7:00am - 5:00pm
Wednesday, May 5: 7:00am - 6:00pm
You must wear your conference badge to board the bus. We suggest you wear closed-
Thursday, May 6: 7:00am - 11:00am
toe shoes and comfortable clothing appropriate for indoor and outdoor activities.
All pre-conference Training and Certification Courses require additional regis-
tration and feed. See page 10. DINING
Your AMUG Conference attendee pass includes all meals from Sunday evening through
AMUGEXPO HOURS Thursday evening.
AMUGEXPO AND DINNER
Sunday, May 2: 4:00pm -10:00pm BOARD OF DIRECTORS ELECTION
AMUGEXPO The AMUG Board of Directors election will take place via the AMUG mobile app or
Monday, May 3: 10:00am - 1:30pm in-person ballot. Paid conference attendees are eligible to vote. Voting will take place
AMUGEXPO,TECHNICAL COMPETITION, AND DINNER Sunday, May 2 at 4:00pm to Monday, May 3 at 11:59pm.
Monday, May 3: 6:00pm - 10:00pm
More information on page 7.
Diamond and Platinum booths open all week - see daily schedule for times.
AMUGexpo is part of the AMUG Conference. Seperate tickets or attendance for BUSINESS MEETING
the AMUGexpo are not available. AMUGexpo is open to all registered conference The AMUG Business Meeting will take place Wednesday, May 5 at 11:00am. The Business
attendees. Meeting is for AMUG Conference attendees only. The Board of Directors for 2020-2021
will be announced at the meeting. All AMUG Conference attendees are considered
AMUG Members, even first-time attendees. Please make sure to attend!
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 3
FEATURED SPEAKERS
Ag
genda-at-a-Glance
INTERNATIONAL SATURDAY, 1 MAY 2021 SUNDAY, 2 MAY 2021
SCHOLARSHIP WINNERS
CARL DEKKER
TODD GRIMM
REPORT PRE-CONFERENCE ACTIVITY PRE-CONFERENCE ACTIVITY
SUPPLEMENTARY CONFERENCE TRAINING AND SUPPLEMENTARY CONFERENCE TRAINING AND
CERTIFICATION CERTIFICATION
NEW! ASTM NEW! ASTM
ASTM Certification Course (2 day course) ASTM Certification Course (continuation)
Quality Assurance for Additive Manufacturing Quality Assurance for Additive Manufacturing
8:00am-5:00pm 8:00am-3:00pm
More info on page 10 More info on page 10
2021 Randy Stevens Scholarship Winner
2021 Guy E Bordaeu Scholarship Winner
NEW! UTOOLING | SME NEW! UTOOLING | SME
Additive Manufacturing – Technician Review Additive Manufacturing – Technician Review
Program (2 day course) Program (continuation)
8:00am-5:00pm 8:00am-3:00pm
AMUG AM Industry Advisor
More info on page 10 More info on page 10
T.A. Grimm & Associates
AMUG President
AMUG CONFERENCE ACTIVITY BEGINS
REGISTRATION OPEN
MET-L-FLO
10:00AM-8:00PM
SPEAKER CENTER AND APP DESK OPEN
10:00AM-8:00PM
CONFERENCE PROGRAM
KEYNOTE
JONATHAN MORRIS,, M.D.
New Member Welcome
2021 TECHCOMP WINNERS
INNOVATOR SHOWCASE
3:00pm-4:00pm
First-time conference attendees welcome and
introduction to the AMUG Conference.
AMUGexpo and Networking Dinner
EXPO OPEN
4:00pm - 10:00pm
Join us Sunday night for the AMUGexpo Opening. Enjoy a
buffet dinner and beverages as you tour the AMUGexpo.
ALL EXHIBITS OPEN
Anatomic Modeling Laboratory
Dr. Hans Langer, EOS Group
Co-Director, 3D Printing/
Mayo Clinic
4 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021
MONDAY, 3 MAY 2021 TUESDAY, 4 MAY 2021 WEDNESDAY, 5 MAY 2021 THURSDAY, 6 MAY 2021
REGISTRATION OPEN REGISTRATION OPEN REGISTRATION OPEN REGISTRATION OPEN
7:00am-8:00pm 7:00am-5:00pm 7:00am-6:00pm 7:00am-11:00am
SPEAKER CENTER AND APP DESK OPEN SPEAKER CENTER AND APP DESK OPEN SPEAKER CENTER AND APP DESK OPEN SPEAKER CENTER AND APP DESK OPEN
7:00am-4:30pm 7:00am-4:00pm 7:00am-4:00pm 7:00am-2:00pm
BREAKFAST BREAKFAST BREAKFAST BREAKFAST
7:00am-8:00am 7:00am-8:00am 7:30am-8:30am 7:30am-8:30am
CONFERENCE PROGRAM CONFERENCE PROGRAM CONFERENCE PROGRAM CONFERENCE PROGRAM
AMUG Opening Address DRIVING INNOVATION DRIVING INNOVATION AMUG Board of Directors Panel Session
Insights and Highlights 2021 DINO Awards Announced 2019 Technical Competition Winners 8:30am-9:00am
AMUG Board of Directors Election Process 8:30am-9:00am 8:30am-9:00am
8:00am-9:30am Distinguished INnovator Operator (DINO) Presentation The 2019 AMUG Technical Competition Winners will DRIVING INNOVATION
provide a presentation on their winning applications Keynote
Building the Future of AM International Report Jonathan Morris, MD, Mayo Clinic
9:30am-10:00am Todd Grimm, T.A. Grimm & Associates DRIVING INNOVATION 9:00am-10:00am
2021 AMUG Scholarship Recipients 9:00am-10:00am Innovators Showcase
Presentations from Guy Bourdeau and Randy Stevens Dr. Hans Langer, EOS Group Break
Scholarship recipients Break 9:00am-10:00am 10:00am-10:30am
10:00am-10:30am
Break Break AMUG, Sponsor Sessions and Training Lab Sessions
10:00am-10:30am AMUG, Sponsor Sessions and Training Lab Sessions 10:00am-10:30am 10:30am - 12:00pm
10:30am - 12:00pm
AMUGexpo DRIVING INNOVATION Networking Lunch
EXPO OPEN Networking Lunch 2021 Technical Competition Winners Announced 12:00pm-1:15pm
10:00am - 1:30pm (note: sessions begin at 1:30pm) 12:00pm-1:15pm 10:30am-11:00am
ALL EXHIBITS OPEN AMUG, Sponsor Sessions and Training Lab Sessions
AMUG, Sponsor Sessions and Training Lab Sessions AMUG Business Meeting 1:30pm - 2:30pm
Networking Lunch 1:30pm - 2:30pm 11:00am-12:00pm
12:00pm-1:15pm Open to all full-conference pass attendees. Break
Sponsors and Exhibitors welcome Break New 2021-2023 AMUG Board announced 2:30pm-3:00pm
2:30pm-3:00pm
AMUG, Sponsor Sessions and Training Lab Sessions Networking Lunch AMUG, Sponsor Sessions and Training Lab Sessions
1:30pm - 2:30pm AMUG, Sponsor Sessions and Training Lab Sessions 12:00pm-1:15pm 3:00pm - 5:30pm
3:00pm - 4:00pm
Break AMUG, Sponsor Sessions and Training Lab Sessions Family Dinner & Closing
2:30pm-3:00pm Board Buses for Off-Site Dinner 1:30pm - 2:30pm An event for all full-conference pass attendees and
6:00pm - 6:15pm sponsors.
AMUG, Sponsor Sessions and Training Lab Sessions Buses leave promptly at 6:30pm Break
3:00pm - 5:30pm Everyone must wear their AMUG badge or show their 2:30pm-3:00pm AMUG Family Dinner is the official closing event at
purchased ticket to board the bus. the AMUG Conference. Attendees and sponsors are
AMUGexpo, Technical Competition and Networking Location: Group Arrival location between David’s Club AMUG, Sponsor Sessions and Training Lab Sessions encouraged to submit their family or favorite recipes for
Dinner and Scratch Market on the Lobby Level 3:00pm - 5:30pm consideration.
EXPO OPEN with Technical Competition
6:00pm - 10:00pm AMUG Off-Site Dinner Dinner - Florida Style Along with a family dinner there will be music and
ALL EXHIBITS OPEN 7:00pm - 10:00pm 6:00pm-10:00pm activities for everyone to participate.
An event for all full-conference pass attendees and An event for all full conference pass attendees and
sponsors. sponsors. Enjoy a night of great food, games, and more. CONFERENCE CONCLUDES
Transportation provided. Additional dinner tickets are
available for purchase.
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 5
AMUG MOBILE APP
COMING SOON!
DOWNLOAD THE EVENTSCRIBE APP
Search for “eventScribe” in the Apple App Store or AMUG MOBILE APP
N !
Google Play Store. AMUG full-conference attendees
G SO O
INSTALL and OPEN the app then SELECT the event:
receive access to all contents within
N i n
the app including all course materials,
I
“AMUG 2021”
CO M c h
presentations, recording and evaluations.
u n
CLICK the icon to launch your app
l a
The Conference Proceedings will be
t o d
LOGIN TO THE AMUG CONFERENCE EVENT APP
p e
accessible via the mobile app and AMUG
e A p i s t e r
website.
b i l e g
To start using the event app, select “Login” and enter
M o l l r
your:
a
Exhibitors and Expo Staff receive access
t o
Username (email address you registered
2 1
with for the conference) to non-course materials (AMUGexpo Floor
l 2 0
plan and information, no presentation/
i
and
p r
Access Key (your conference registration
A
slide access).
number)
e e s !
EVALUATIONS
e n d
TAKE NOTES ON PRESENTATION SLIDES
t
Speaker and Conference evaluations are
a t
Presentations supplied by the speaker will be available the day of accessible through the mobile app or
the presentation. Note, some slides or presentations may differ from through the online planner.
what is shown in the presentation room.
Find the presentation you need and interact with the presentation BOARD ELECTIONS
by drawing on slides or highlighting text. Use the note-taking mode
2021 will begin the new process for AMUG
to type your notes next to each slide. Access your notes and print
them out by clicking the “My Notes” on the home screen or “Online Board fo Directors elections. See page 7
Personal Summary” in the hamburger menu ( ). for more infromation.
No mobile device? No Problem.
As long as you have an internet connection, you can take notes on
presentations through your laptop via this link:
https://tinyurl.com/amug2021
6 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021
AMUG Board of Directors
NEW ELECTION PROCESS
AMUG Board of Directors—Nomination and Election
The AMUG Board of Directors has nine Director positions; eight elected positions and one appointed position. Four of the Directors also serve as
officers of the organization.
Elections are held annually during the AMUG Conference. The election ballot consists of individuals that have submitted a self-nomination and have
passed a screening by the AMUG Nominating Committee. The nomination period for the 2021 elections is now closed.
2021 Election
Below are the nine board positions. Elections will be held during the AMUG Conference on May 2 and May 3 via the AMUG Mobile App. Candidates
for the Board of Directors will be presented to the AMUG membership via the AMUG website and mobile app in April. The newly elected Board of
Directors will be announced May 5, 2021. More information to follow.
BOARD OF DIRECTORS - 2021 ELECTION
OFFICER/DIRECTOR POSITIONS SEAT AVAILABLE TERM OF OFFICE (YEARS) ELECTED OR APPOINTED
President 1 1* Elected
Vice President 1 1* Elected
Treasurer 1 3 Appointed
Secretary 1 2 Elected
DIRECTORS POSITIONS SEAT AVAILABLE TERM OF OFFICE (YEARS) ELECTED OR APPOINTED
Director, Education and Conference 1 2 Elected
Director, Business Development 1 2 Elected
Director, Membership 1 1* Elected
Director, Event and Hospitality 1 1 Elected
Director at Large 1 1* Appointed
*These positions will serve through June 30, 2022. Thereafter, these positions will have 2-year terms.
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 7
Hilton Orlando Overview
Hilton Orlando
6001 Destination Parkway
Orlando, Florida USA
Phone: +1 407-313-4300
8 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 9
Pre-Conference Training and Certification
The programs listed below are available only to AMUG Conference attendees and are NOT included with AMUG Conference registration.
Saturday, May 1, 2021 - Sunday, May 2, 2021
Participation requires separate registration and is at an additional cost.
NEW! ASTM Certificate Course NEW! Additive Manufacturing—
Quality Assurance for Additive Manufacturing Technician Review Program
1 1/2 day of instruction; 1/2 day exam
This course is aimed at individuals with existing experience in AM who wish to understand the routes to The Technician certification is ideal for a candidate with a two-year associate’s degree in additive
releasing products requiring quality assurance and control (such as aerospace). Note that safety aspects manufacturing or is currently enrolled in a college program, and/or has one or more years of
will not be covered (this is covered in other training courses). working experience in a manufacturing-related field.
Date/time: Saturday, May 1, 2021 (8:00am – 5:00pm) & Sunday, May 2 (8:00am – 3:00pm) Successful (passing) completion of the exam yields the designation of Certified Additive
Manufacturing–Technician (CAM-T). The exam will be administered on Sunday, May 2.
Cost: $649/person (when registering before April 4, 2021)
$799/person (when registering after April 4, 2021) Date/time: Saturday, May 1 (8:00 am – 5:00 pm) & Sunday, May 2 (8:00 am – 3 pm)
Register: On ASTM’s website (here) Cost: $895/person
Instructors Register: coming soon
Martin White, Head of Additive Manufacturing Programs – Europe Region, ASTM International
Shane Collins, VP and General Manager North America Operations, Additive Industries
The certification covers key roles and responsibilities for an additive manufacturing technician, the
As additive manufacturing continues to mature as a production manufacturing method, it becomes more additive manufacturing process chain, design for additive manufacturing, materials and process
important than ever to demonstrate quality assurance to create quality products. selection, secondary processes, and key safety considerations.
This course will provide guidance for what is key to control quality output and demonstrate compliance The prep course is a discussion-oriented and interactive session in which participants receive
to requirements. The approaches here will be based on ASTM Additive Manufacturing Standards and how comprehensive application-based knowledge of the 3D printing industry. Covering key roles and
they can be combined with the ‘traditional’ manufacturing toolkit, including: responsibilities for an AM technician, the AM process chain, design for AM, material and process
• Quality Management Systems for Additive Manufacturing selection, secondary processes, and key safety considerations, you will begin to understand how
• “Make a plan, stick to the plan” to apply AM in your organization.
• Facility (machine qualification, supply chain, post-processing)
• Process The certification exam consists of 120 multiple-choice questions.
• Materials
• How can standards help? Objectives
• Linking Quality to Certification & Qualification • Summarize the AM process chain, materials, technologies and economic drivers
• Fundamental requirements for regulated industries • Evaluate designs for AM covering general guidelines, file formats, build factors and
• Demonstration of Suitable Qualified & Experienced Personnel – People are key optimization strategies
• Lean Manufacturing Methods – Driving towards ‘right first time’ • Evaluate differentiating factors when selecting AM materials and processes
• “Haven’t we done this before?” • Describe the end to end manufacturing chain from build preparation to quality assurance
• Configuration Management & Change Control – What is essential? • Explain how to leverage AM to support various traditional manufacturing methods
• How can we track performance, prevent deviations, and what to do if quality deviates? • Describe the impact of AM on the manufacturing environment and key risk and safety
• How do we use NDT, in-process monitoring, and other AM tools? considerations
The 2-day course will be followed by an exam that will be conducted 2 weeks after the training event, held
online. After successful completion of the course and passing marks for the exam, the participants will
receive the ‘ASTM AM Qualify Assurance Certificate’.
10 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021Saturday, May 1, 2021
AMUGexpo Pre-Conference Programs
Lower Level Additional Registration and Costs apply AMUG Programs
8:00am-8:30am AMUGexpo Sponsor and Exhibitor set-up AMUG Program Set-Up with Volunteers
NEW! ASTM Certificate Course NEW! TOOLINGU|SME continues
8:30am-9:00am
9:00am-9:30am Quality Assurance for Additive Additive Manufacturing – Technician
Manufacturing Review Program
9:30am-10:00am
Saturday, May 1 Saturday, May 1
10:00am-10:30am
8:00 am – 5:00 pm (1 1/2-day review)
10:30am-11:00am 8:00 am – 5:00 pm
continues
AMUGEXPO AREA CLOSED FOR SETUP
11:00am-11:30am Sunday, March 22 continues
11:30am-12:00pm 8:30 am – 3:00 pm Sunday, May 2
(1/2-day exam)
12:00pm-12:30pm 8:00 am – 3:00 pm
12:30pm-1:00pm
1:00pm-1:30pm Cost Cost
$649/person (before April 4, 2021) $895/person
1:30pm-2:00pm $799/person (after April 4, 2021)
2:00pm-2:30pm
2:30pm-3:00pm
Registration information at: https://www. Registration information at: https://www.
3:00pm-3:30pm amug.com/2021_train_certify/ amug.com/2021_train_certify/
3:30pm-4:00pm
4:00pm-4:30pm
4:30pm-5:00pm
Sunday, May 2, 2021
AMUGexpo Pre-Conference Programs
Lower Level Additional Registration and Costs apply AMUG Programs
8:00am-8:30am
NEW! ASTM Certificate Course NEW! TOOLINGU|SME
8:30am-9:00am
9:00am-9:30am Quality Assurance for Additive Additive Manufacturing – Technician
Manufacturing Review Program
9:30am-10:00am
2nd day 2nd day
10:00am-10:30am Sunday, March 22 Sunday, May 2 Registration Open
8:30 am – 3:00 pm (1/2-day exam) Location: Lobby Level
10:30am-11:00am
8:00 am – 3:00 pm
10:00am - 8:00pm
AMUGEXPO AREA CLOSED
11:00am-11:30am
registration for Saturday and Sunday required registration for Saturday and Sunday required
11:30am-12:00pm Badge Pick-up
Speaker Center
12:00pm-12:30pm Mobile App Center
12:30pm-1:00pm
1:00pm-1:30pm
1:30pm-2:00pm
2:00pm-2:30pm
2:30pm-3:00pm
3:00pm-3:30pm New Member Welcome
Location: Orange Ballroom
3:30pm-4:00pm
AMUGexpo 4:00pm-10:00pm AMUGexpo | Dinner and Networking
Open
Orlando Ballroom, Lower Level
4:00pm-
10:00pm ALL SESSIONS CLOSED
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 11REGISTRATION - SPEAKER CENTER - MOBILE APP DESK Hours Open Location
General Sessions and Breakouts open to all Conference Attendees
REGISTRATION and BADGE PICK-UP 7:00am - 8:00pm Lobby Level
Speakers, Dates and Times subject to change without notice - updates made through mobile app
Speaker Center and Mobile App Desk Open 7:00am - 4:30pm Lobby Level
Monday, May 3, 2021
AMUGexpo 7:00am-8:00am BREAKFAST Foyer, Lower Level
Lower Level
8:00am-9:30am AMUG OPENING ADDRESS Carl Dekker, AMUG President
AMUGEXPO
INSIGHTS AND HIGHLIGHTS
CLOSED
AREA
AMUG BOARD OF DIRECTORS NOMINATIONS, PAUL BATES, AMUG Past President and NomCom Committee Chair Orange Ballroom, Lower Level
9:30am-10:00am BUILDING THE FUTURE OF AM: Scholarship Recipients Presentation | Brett Charlton, AMUG Scholarship Chair
2021 Guy Bourdeau Scholarship Winner: TBA Orange Ballroom, Lower Level
2021 Randy Stevens Scholarship Winner: TBA
10:00am-10:30am BREAK Orlando Ballroom, Lower Level
10:00am-2:30pm AMUGEXPO OPEN Orlando Ballroom, Lower Level
12:00pm-1:15pm NETWORKING LUNCH Orlando Ballroom, Lower Level
BREAKOUT SESSIONS BEGIN
AMUG PROGRAM
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TR A C K Aerospace/Transportation AM Metal Technologies Scanning & Metrology Medical AM Technologies (Non-Metal)
AMUGexpo 1:30pm-2:30pm ROUNDTABLE PANEL ROUNDTABLE PANEL
Area OPEN
10:00am- Rapid Build Quality Inspection Method for An Introduction to Metrology and Subject Matter Experts Troubleshooting Panel
1:30pm
Divergent Adaptive Production System
Metal AM 3D Scanning
Michael Kenworthy MODERATOR
Simon Pun Matthew Donovan Giles Gaskell Shannon Van Deren, Layered Manufacturing MODERATOR
Divergent Technologies Jabil Hexagon Metrology and Consulting TBA
Derek Ellis PANELIST PANELIST
Authentise POC – Brent Wright, Eastpointe Orthotics and TBA
Prosthetics
Polymer Printing – Mike Littrell, C Ideas
Metal Printing – Ryan Kircher, Additive
Industries
Quality/Regulatory – Dawn Lissey, Empirical
Tech
Ceramic Printing – Dror Danai, XJet
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
3:00pm-4:00pm PANEL 3:00PM-3:30PM
Adoption and Industrialization In-process Inspection and Quality 3D Scanning Workshop Can 3D Printing Change Lives? Soft Touch Tooling - A Process Redefined
Challenges at Lockheed Martin Assurance Perspective from a Clinician and Patient
WORKSHOP COORDINATORS Andrew Roderick
Prabhjot Singh MODERATOR Derek Ellis, Authentise Brent Wright Extol, Inc.
Lockheed Martin Space Jordan Weston, MSOE Giles Gaskell, Hexagon Metrology Digital Designer
Lloyd Soss, Hexagon Metrology 3:30PM - 4:00PM
PANELIST Dan Perreault, NeoMetrix Technologies
TBA Beyond Jigs and Fixtures, Bringing Additive
to the Shop Floor
AMUGEXPO AREA CLOSED
Paul DeWys
2:30PM-6:00PM
Forerunner 3D Printing
4:00pm-4:30pm transition
4:30pm-5:30pm PANEL ROUNDTABLE PANEL 4:30PM-5:00PM
CAD Design Guide for Fused Deposition
Use of Pellet Fed Post Processing Metal Parts Panel 3D Scanning Panel Discussion Fast and Clear DLP 3D Printing Transforms Modeling, Polyjet, Stereolithography
Additive Manufacturing Machines Aligner and Retainer Business Models Technology Restrictions
ROUNDTABLE
Eric Johnson MODERATOR Derek Ellis, Authentise Eric Wu Brandon Slack
John Deere Jordan Weston, MSOE Giles Gaskell, Hexagon Metrology Wu Orthodontics Lockheed Martin
Lloyd Soss, Hexagon Metrology
PANELIST Dan Perreault, NeoMetrix Technologies 5:00PM - 5:30PM
Agustin Diaz, REM Surface Engineering
Steve Alviti, Bel Air Finishing Corporation 3D Printing for Robotic End of Arm Tooling
Richard Savage
Savage Automation
5:30pm-6:00pm ALL SESSIONS CLOSED
6:00pm-10:00pm AMUGexpo and Technical Competition | Dinner and Networking | Orlando Ballroom, Lower Level
PRELIMINARY AS OF MARCH 17, 2021
AMUGexpo
Area OPEN 12 2021 AMUG CONFERENCE -
6:00pm-
10:00pmWELCOME TO AMUG
INSIGHTS AND HIGHLIGHTS Carl Dekker, Paul Bates
BOARD ELECTIONS AMUG
8:00am-10:00am
12:00pm-1:15pm NETWORKING LUNCH | Orlando Ballroom, Lower Level
BREAKOUT SESSIONS BEGIN
PLATINUM SPONSOR PROGRAM DIAMOND SPONSOR PROGRAM
LAKE CONCORD LAKE HART ORANGE BALLROOM A-C ORANGE BALLROOM E-G FLORIDA BALLROOM 1-3 KEY WEST A-C
Lobby Level Lobby Level Lower Level Lower Level Lower Level Lower Level
ROOM PLATINUM SESSIONS PLATINUM SESSIONS Diamond Speaking Session Diamond Speaking Session Diamond Training Session Diamond Training Session
1:30pm-2:30pm Platinum Sponsor: EnvisionTEC Platinum Sponsor: Dinsmore & Associates Diamond Sponsor: DSM Additive Diamond Sponsor: SLM Solutions Diamond Sponsor: Diamond Sponsor: ExOne
Manufacturing
TBA TBA TBA TBA
TBA CLOSED
EnvisionTEC Dinsmore & Associates SLM Solutions ExOne
DSM Additive Technologies
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
3:00pm-4:00pm Platinum Sponsor: Plural Additive Manufacturing Platinum Sponsor: GKN Additive Diamond Sponsor: BASF Diamond Sponsor: Formlabs Diamond Sponsor: Dyndrite Corporation Diamond Sponsor:
TBA TBA TBA TBA TBA
Plural Additive Manufacturing GKN Additive BASF Formlabs Dyndrite Corporation CLOSED
4:00pm-4:30pm transition
4:30pm-5:30pm Platinum Sponsor: AddUp Solutions Platinum Sponsor: Titan Robotics Diamond Sponsor: Essentium Materials Diamond Sponsor: DMG MORI Diamond Sponsor: Diamond Sponsor: LuxCreo
TBA TBA TBA TBA TBA
AddUp Solutions Titan Robotics Essentium Materials DMG MORI CLOSED LuxCreo
5:30pm-6:00pm ALL SESSIONS CLOSED
6:00pm-10:00pm AMUGexpo and Technical Competition | Dinner and Networking | Orlando Ballroom, Lower Level
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 13REGISTRATION - SPEAKER CENTER - MOBILE APP DESK Hours Open Location
REGISTRATION and BADGE PICK-UP 7:00am - 5:00pm Lobby Level General Sessions and Breakouts open to all Conference Attendees
Speaker Center and Mobile App Desk Open 7:00am - 4:00pm Lobby Level Speakers, Dates and Times subject to change without notice - updates made through mobile app
Tuesday, May 4, 2021
DIAMOND & 7:00am-8:00am BREAKFAST Foyer, Lower Level
PLATINUM
8:30am-9:00am DRIVING INNOVATION | Distinguished INnovator Operator (DINO) Award Presentation
Orange Ballroom, Lower Level
Gary Rabinovitz, AMUG Chairman and Todd Grimm, AMUG AM Advisor
9:00am-10:00am INTERNATIONAL REPORT Todd Grimm, AMUG AM Advisor Orange Ballroom, Lower Level
10:00am-10:30am BREAK Foyer, Lower Level
BREAKOUT SESSIONS BEGIN
AMUG PROGRAM
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TRACK Aerospace/Transportation AM Metal Technologies Scanning & Metrology Education & Training Casting
DIAMOND & 10:30am-11:00am 10:30AM 10:30AM WORKSHOP PANEL
PLATINUM
BOOTH AREA
ACCESSIBLE State of Knowledge: Environmental Inspection and Process Optimization with Quality Management Workshop: How to A World Shared Between 3D Printed Metal
Additive Manufacturing Ecosystem Impacts of Metal Additive Manufacturing Industrial CT and Castings
Use the 8 Ms
10:30am- Applied Towards Application Development Sherry Handel Philip Sperling
12:00pm 11:00am-11:30am for Unmanned Arial System Additive Manufacturer Green Trade Association Volume Graphics GmbH MODERATOR MODERATOR
Ivan Madera, Morf3D Ed Graham, ProtoCAM
Steve Fournier 11:15AM 11:15AM
General Atomics Aeronautical Systems Inc. PANELIST
PANELIST
Stuck in the Middle - Bridging the The Role of X-Ray and Computed Amy Alexander, Mayo Clinic
11:30am-12:00pm Gap to Production Tomography for Additively Manufactured Gianluca Mattaroccia, Estée Lauder Paul Hollowaty, Spee3D
Shawn Morgan Parts Michael Pecota, NAVAIR Scott Volk, Kam Solutions
Sintavia LLC Jacob S. Rickter Gary Bredael, AddUp
Pinnacle Industrial X-Ray Laboratory (PiXL) Gerard Thiel, University of Iowa
Marshall Miller, Tesserract4D
Mike Hascher, Eagle Engineered Solutions
12:00pm-1:15pm NETWORKING LUNCH | LOCATION: The Promenade
PLATINUM BOOTH
AREA CLOSED
DIAMOND &
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
AM Technologies
TRACK Aerospace/Transportation (Non-Metal) Materials Education & Training Casting
DIAMOND & 1:30pm-2:30pm PANEL 1:30PM-2:00PM PANEL
PLATINUM
BOOTH AREA
ACCESSIBLE Developing and Transitioning Best AM Additive Manufacturing Applications in Ensuring High Quality Standards in Laser Quality Assurance and Safety for Additive 3D Printed Sand Molds Using the Latest in
Practices for Technological Dominance for Composites Powder Bed Fusion Production Manufacturing Topology and Simulation Software
1:30pm-
4:00pm Our Warfighters
Rick Neff Sebastian Piegert MODERATOR Brandon Lamoncha
MODERATOR Rick Neff, LLC Siemens Energy AG Paul Bates, ASTM Humtown Products
James Zunino, US Army Combat Capabilities
Development Command (DEVCOM) 2:00PM - 2:30PM PANELIST
TBA
PANELIST Benefits of Continuous Fiber for the
USMC Navy, US Navy Energy Sector
Air Force, US Air Force
Joel Alfano
Bill Marshall, New Jersey Innovation Institute LJ
Siemens Energy
Holmes, UDEL
2:30pm-3:00pm Joe Kott, US Army DEVCOMi BREAK | Location: Foyer, Lower Level
TR ACK Medical Materials Education & Training Casting
3:00pm-4:00pm
DIAMOND &
PLATINUM
FDA Registered versus ISO 13485 Certified Important Plastics Material Considerations Incorporating Combustible Dust Controls 3DP/AM Ceramic Cores for Investment
AREA and Maintaining Good Standing for Successful Open Platform 3D Printing into the Facility Design for Additive Casting Applications
CLOSES Manufacturing Processes
PROMPTLY
AT 4:00PM Dawn Lissy Haleyanne Freedman Michael Hascher
Empirical Testing Corp. M. Holland Company Jason Reason Eagle Engineered Solutions
Airdusco Engineering Design Services
4:00pm ALL SESSIONS CLOSED
AREA CLOSED
DIAMOND &
PLATINUM
6:00pm- 6:15pm Board Buses for Off-Site Dinner and Networking Event
7:00pm-10:00pm AMUG Off-Site Dinner and Networking Event
14 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021Todd Grimm
INTERNATIONAL REPORT AMUG Industryy Advisor
9:00am-10:00am
BREAKOUT SESSIONS BEGIN
PLATINUM SPONSOR PROGRAM DIAMOND SPONSOR PROGRAM
LAKE CONCORD LAKE HART ORANGE BALLROOM A-C ORANGE BALLROOM E-G FLORIDA BALLROOM 1-3 KEY WEST A-C
Lobby Level Lobby Level Lower Level Lower Level Lower Level Lower Level
ROOM PLATINUM SESSIONS PLATINUM SESSIONS Diamond Speaking Session Diamond Speaking Session Diamond Training Session Diamond Training Session
10:30am- Platinum Sponsor: MSC Software Platinum Sponsor: HP Diamond Sponsor: LuxCreo Diamond Sponsor: DMG MORI Diamond Sponsor: Essentium Materials
11:00am
TBA TBA TBA CLOSED TBA TBA
MSC Software HP LuxCreo DMG MORI Essentium Materials
11:00am-
11:30am
11:30am- CLOSED
12:00pm
12:00pm-1:15pm NETWORKING LUNCH | LOCATION: The Promenede
1:30pm-2:30pm Platinum Sponsor: DyeMansion Platinum Sponsor: Rosler Metal Finishing Diamond Sponsor: ExOne Diamond Sponsor: SLM Solutions Diamond Sponsor: DSM Additive
Manufacturing
TBA TBA
DyeMansion Rosler Metal Finishing CLOSED TBA TBA TBA
ExOne SLM Solutions DSM Additive Technologies
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
3:00pm-4:00pm Platinum Sponsor: RP America Platinum Sponsor: Renishaw Diamond Sponsor: Dyndrite Corporation Diamond Sponsor: Formlabs Diamond Sponsor: BASF
TBA TBA
RP America Renishaw TBA CLOSED TBA TBA
Dyndrite Corporation Formlabs BASF
4:00pm ALL SESSIONS CLOSED
6:00pm- 6:15pm Board Buses for Off-Site Dinner and Networking Event
7:00pm-10:00pm AMUG Off-Site Dinner and Networking Event PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 15REGISTRATION - SPEAKER CENTER - MOBILE APP DESK Hours Open Location
REGISTRATION and BADGE PICK-UP 7:00am - 6:00pm Lobby Level
General Sessions and Breakouts open to all Conference Attendees
Speaker Center and Mobile App Desk Open 7:00am - 4:00pm Lobby Level Speakers, Dates and Times subject to change without notice - updates made through mobile app
Wednesday, May 5, 2021
DIAMOND & 7:30am-8:30am BREAKFAST Foyer, Lower Level
PLATINUM
8:30am-9:00am DRIVING INNOVATION | PRESENTATION BY 2019 TECHNICAL COMPETITION WINNERS Jason Lopes, AMUG TechComp Chair
ADVANCED CONCEPTS Carbon - digitally printed helmet liner components and Riddell’s SpeedFlex Precision Diamond Helmet Orange Ballroom, Lower Level
ADVANCED FINISHING Maddie Frank, University of Wisconsin - Cello, and Met-L-Flo, Met-L-Flo - Master Chief reproduction
9:00am-10:00am DRIVING INNOVATION | INNOVATOR SHOWCASE WITH DR. HANS LANGER
DIAMOND AND PLATINUM BOOTH AREA CLOSED
Orange Ballroom, Lower Level
Hybrid Live and Recorded Presentation with Dr. Langer, EOS Group and Todd Grimm, AMUG AM Advisor
10:00am-10:30am BREAK Foyer, Lower Level
10:30am-11:00am DRIVING INNOVATION | 2021 TECHNICAL COMPETITION WINNERS ANNOUNCED Bonnie Meyer, AMUG TechComp Chair Orange Ballroom, Lower Level
11:00am-12:00pm AMUG Business Meeting - 2021-2022/2023 AMUG Board of Directors Announced Orange Ballroom, Lower Level
12:00pm-1:15pm NETWORKING LUNCH The Promenade
BREAKOUT SESSIONS BEGIN
AMUG PROGRAM
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TR A CK AM Metal Technologies Medical Software Materials Casting
1:30pm-2:30pm ROUNDTABLE PANEL ROUNDTABLE PANEL ROUNDTABLE PANEL
DIAMOND &
PLATINUM Current Status, Myths, and Challenges of AM for the BioPharma Industry Simulation Tools for Additive Flame Retardant Materials Lightweighting an Aircraft Casting: A Case
BOOTH AREA Directed Energy Deposition Processes Manufacturing Panel Discussion Study
ACCESSIBLE
1:30pm- Steven Kjar MODERATOR
5:30pm MODERATOR Thermo Fisher MODERATOR Thomas Mueller
Adam Penna, All Digital AM Tim Gornet, University of Louisville PANELIST Mueller Additive Manufacturing Solutions
Fred Arazan, UL
PANELIST PANELIST Tryggve Rogers, Danfoss
Carl Johnson, Additive Manufacturing, Norsk TBA Nirali Surati, DSM
Titanium
Mike Vasquez, PhD, 3Degrees Consulting
Lucas Brewer, Additive Manufacturing, Optomec
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
AM Metal Technologies Medical Software Education & Training Casting
3:00pm-4:00pm ROUNDTABLE PANEL ROUNDTABLE PANEL
Design for 3D Printing
Optimizing Refractory Metals for Additive Choosing to Print with Metal Practical Approaches to IoT and Additive Tips, Tricks and Techniques Using Ceramic 3D Printing with
Manufacturing Manufacturing Investment Casting
MODERATOR MODERATOR Mark Abshire
Faith Oehlerking Shannon Van Deren, Layered Manufacturing Mike Vasquez, 3Degrees Peter Lorenz
H.C. Starck Solutions and Consulting Signicast
PANELIST
PANELIST TBA
Tim Warden, Vertex Manufacturing
Shane Collins, Additive Industries
Scott Volk, KAM
Paul Bates, ASTM
4:00pm-4:30pm transition
TR A CK AM Metal Technologies Medical Software Education & Training AM Technologies (Non-Metal)
4:30pm-5:30pm ROUNDTABLE PANEL 4:30PM-5:00PM
Part Evaluation Workshop Advances in 3D Printed Polymer Injection 3D Printing Workflow and MES Panel PART 1 - Hands-On Silicone Mold-making Design for Large Format Extrusion
Mold Tooling and Urethane Casting Additive Manufacturing
Tad Steinberg MODERATOR
Siemens Energy Ben Arnold TBA William Molitor Alex Roschli
Fortify RAMPF Group, Inc. Oak Ridge National Laboratory
PANELIST
TBA 5:00PM - 5:30PM
Infrastructure Scale Additive
Manufacturing: Contemporary Concepts
and Challenges in Concrete 3D Printing
Brian Post
Oak Ridge National Laboratory
5:30pm-6:00pm ALL SESSIONS CLOSED
PLATINUM
DIAMOND
CLOSED
AREA
6:00pm-10:00pm AMUG Dinner and Networking | Location: The Promenade
&
16 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021Dr. Hans Langer
INNOVATOR SHOWCASE Founder and Former CEO, EOS GmbH
9:00am-10:00am Chairman, EOS Group
12:00pm-1:15pm NETWORKING LUNCH | The Promenade
BREAKOUT SESSIONS BEGIN
PLATINUM SPONSOR PROGRAM DIAMOND SPONSOR PROGRAM
LAKE CONCORD LAKE HART ORANGE BALLROOM A-C ORANGE BALLROOM E-G FLORIDA BALLROOM 1-3 KEY WEST A-C
Lobby Level Lobby Level Lower Level Lower Level Lower Level Lower Level
ROOM PLATINUM SESSIONS PLATINUM SESSIONS Diamond Speaking Session Diamond Speaking Session Diamond Training Session Diamond Training Session
1:30pm-2:30pm Platinum Sponsor: Markforged Platinum Sponsor: Diamond Sponsor: BASF Diamond Sponsor: Formlabs Diamond Sponsor: Dyndrite Corporation
TBA TBA TBA TBA TBA CLOSED
Markforged BASF Formlabs Dyndrite Corporation
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
3:00pm-4:00pm Platinum Sponsor: Platinum Sponsor: GKN Additive Diamond Sponsor: Essentium Materials Diamond Sponsor: DMG MORI Diamond Sponsor: LuxCreo
TBA TBA
TBA TBA CLOSED TBA
Essentium Materials DMG MORI LuxCreo
4:00pm-4:30pm transition
4:30pm-5:30pm Platinum Sponsor: Platinum Sponsor: Diamond Sponsor: DSM Additive Diamond Sponsor: SLM Solutions Diamond Sponsor: ExOne
Manufacturing
TBA TBA
TBA CLOSED TBA
TBA
SLM Solutions ExOne
DSM Additive Technologies
5:30pm-6:00pm ALL SESSIONS CLOSED
6:00pm-10:00pm AMUG Dinner and Networking | Location: The Promenade
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 17REGISTRATION - SPEAKER CENTER - MOBILE APP DESK Hours Open Location
REGISTRATION and BADGE PICK-UP 7:00am - 11:00am Lobby Level General Sessions and Breakouts open to all Conference Attendees
Speaker Center and Mobile App Desk Open 7:00am - 2:00pm Lobby Level Speakers, Dates and Times subject to change without notice - updates made through mobile app
Thursday, May 6, 2021
DIAMOND & 7:30am-8:30am BREAKFAST Foyer, Lower Level
PLATINUM
8:30am-9:00am AMUG BOARD PANEL DISCUSSION AMUG Board of Directors, The Future of AMUG Orange Ballroom, Lower Level
DIAMOND & PLATINUM BOOTH
9:00am-10:00am KEYNOTE ADDRESS: Jonathan Morris, MD Mayo Clinic Orange Ballroom, Lower Level
10:00am-10:30am BREAK Foyer, Lower Level
AREA CLOSED
BREAKOUT SESSIONS BEGIN
AMUG PROGRAM
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TR A C K Aerospace/Transportation Medical Materials Education & Training AM Technologies (Non-Metal)
10:30am-11:00am ROUNDTABLE PANEL
DIAMOND &
PLATINUM
SPONSOR Applying Industrial Metal PBF Process Polymers in Medical Characterization of Ceramic Powders Particle and Chemical Emissions from Failed Prints Mini-Expo
BOOTH AREA
Chain to a Function-Driven, Complex to Improve Performance in Powder-Bed Desktop 3D printers with Different
ACCESSIBLE
10:30am- 11:00am-11:30am Designs MODERATOR Additive Manufacturing Technologies
1:30pm Pete Liacouras, Walter Reed
Tim Bell Filip Francqui Qian Zhang
11:30am-12:00pm
Siemens PANELIST Granutools Underwriters Laboratories Inc.
Marta Ruscello, BASF
NETWORKING Eric Romano, DSM
LUNCH Jeph Ruppert, 3D Systems
12:00pm-
1:15pm
IN DIAMOND 12:00pm-1:15pm NETWORKING LUNCH | Location: AMUGexpo area, Orlando Ballroom, Lower Level
& PLATINUM
BOOTH AREA
ON LOWER AMUG PROGRAM
LEVEL
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TR A C K Aerospace/Transportation Medical Materials Education & Training AM Technologies (Non-Metal)
DIAMOND & 1:30pm-2:30pm PANEL 1:30PM-2:00PM
PLATINUM
BOOTHS
AREA CLOSED Future and Potential Uses of Additive Regulatory Panel Enhancing the Use and Re-Use of Metal Lessons Learned When it Comes to Supply The Art of Finishing 3D Printed Parts
AT 1:30PM
Manufacturing Using Laser Metal Powders for Additive Manufacturing Chain and a Global Pandemic Andrew Sliwa
Deposition in Automotive Custom Prototypes Inc.
MODERATOR Mike Vasquez
Taner KARAGÖZ Shannon Van Deren, Layered Manufacturing John Yin 3Degrees 2:00PM - 2:30PM
Coşkunöz Holding and Consulting Freeman Technology TBA
PANELIST
Dawn Lissey, Empirical Tech
Ben Johnson, 3D Systems
Ryan Kircher, Additive Industries
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
LAKE HIGHLAND LAKE SHEEN LAKE NONA LAKE MIZELL LAKE EOLA
ROOM Lobby Level Lobby Level Lobby Level Lobby Level Lobby Level
TR A CK Aerospace/Transportation AM Metal Technologies Materials Education & Training Casting
3:00pm-4:00pm ROUNDTABLE PANEL WORKSHOP 3:00pm-5:30pm
Accelerating True Innovation in AM Metals Safety Safety-Critical Performance Properties of What is Industrial 3D Printing? An AMUG Foundry In a Box, Pouring
Automotive and Motorsport Using Let’s All Go Home in One Piece Every Night AM Materials Member Discussion. of Molten Metal Into
3D Printing and Advanced Composite Todd Grimm Sand and Ceramic
Materials Paul Bates Kenneth Vessey T.A. Grimm & Associates
ASTM International UL David Rittmeyer
Stewart Davis Audience participation Hoosier Pattern
CRP USA
4:00pm-4:30pm transition
4:30pm-5:30pm
Prototype Aircraft Structure at the DLP Ceramic Printing at Sandia National PART 2 - Hands-On Silicone Mold-making
Extreme Limits of Design Laboratories and Urethane Casting
Ryan Manning Dale Cillessen William Molitor
Big Metal Sandia National Laboratories RAMPF Group, Inc.
Shawn Allan
Lithoz
18 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021
5:30pm-6:00pm SESSIONS CLOSED
6:00pm-10:00pm Family Dinner and Closing | Location: Hilton Orlando PoolJonathan Morris, M.D.
KEYNOTE SPEAKER Co-Director,, 3D Printing
g/Anatomic
9:00am-10:00am Modeling Laboratory
Mayo Clinic
BREAKOUT SESSIONS BEGIN
PLATINUM SPONSOR PROGRAM DIAMOND SPONSOR PROGRAM
LAKE CONCORD LAKE HART ORANGE BALLROOM A-C ORANGE BALLROOM E-G FLORIDA BALLROOM 1-3 KEY WEST A-C
Lobby Level Lobby Level Lower Level Lower Level Lower Level Lower Level
ROOM PLATINUM SESSIONS PLATINUM SESSIONS Diamond Speaking Session Diamond Speaking Session Diamond Training Session Diamond Training Session
10:30am- Platinum Sponsor: Platinum Sponsor: Diamond Sponsor: ExOne Diamond Sponsor: Essentium Materials Diamond Sponsor: DMG MORI
11:00am
TBA TBA
TBA TBA TBA
ExOne CLOSED Essentium Materials DMG MORI
11:00am-
11:30am
11:30am- CLOSED
12:00pm
12:00pm-1:15pm NETWORKING LUNCH | Location: AMUGexpo area, Orlando Ballroom, Lower Level
1:30pm-2:30pm Platinum Sponsor: Platinum Sponsor: Diamond Sponsor: LuxCreo Diamond Sponsor: DSM Additive Diamond Sponsor: SLM Solutions
Manufacturing
TBA TBA CLOSED
TBA TBA TBA
LuxCreo DSM Additive Technologies SLM Solutions
2:30pm-3:00pm BREAK | Location: Foyer, Lower Level
3:00pm-4:00pm Platinum Sponsor: Platinum Sponsor: Diamond Sponsor: Dyndrite Corporation Diamond Sponsor: BASF Diamond Sponsor: Formlabs
TBA TBA CLOSED
TBA TBA TBA
Dyndrite Corporation BASF Formlabs
4:00pm-4:30pm transition SESSIONS CLOSED
4:30pm-5:30pm CLOSED
5:30pm-6:00pm SESSIONS CLOSED PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 19
6:00pm-10:00pm Family Dinner and Closing | Location: Hilton Orlando PoolAMUGEXPO HOURS
AMUGexpo
AMUGEXPO HOURS AMUG PREPARATIONS
SPONSORS AND EXHIBITORS • We have arranged for one way entrance and exits. Please pay attention to the signs.
• Sponsors and Exhibitors may limit the amount of individuals they would like in their booth at one time. Look
Sunday, May 2, 2021 4:00pm - 10:00pm
for each booth social distancing requirements and respect the sponsor and exhibitors request.
Monday, May 3, 2021 10:00am - 1:30pm
• Sponsors and Exhibitors are responsible for cleaning high touch points within their assigned booth space.
Monday, May 3, 2021 6:00pm - 10:00pm
• Sponsors and exhibitors are responsible for adhering to their corporate guidelines. AMUG will not monitor
Exhibitors and Gold sponsors move out on Monday night. Make
or enforce corporate guidelines of participants.
sure to plan your time at the conference to see them all!
• Please respect the sponsor and exhibitors request within their booth.
DIAMOND AND PLATINUM SPONSORS ONLY
For more information regarding AMUG Preparations for the AMUG Conference, download the AMUG
Diamond and Platinum booths area open
Preparations Guide on the AMUG website at www.amug.com
Tuesday, May 4 10:30am - 12:00pm
1:30pm - 4:00pm
Wednesday, May 5 1:30pm - 5:30pm
Thursday, May 6 12:00 - 1:30pm (lunch)
COMPANY BOOTH COMPANY BOOTH COMPANY BOOTH COMPANY BOOTH
3DCERAM SINTO INC 37 ExOne D14 MET-L-FLO Inc 75 TIGER-VAC INC. 13
3Degrees 70 Fabrisonic LLC 50 MSC Software P25 Titan Robotics, Ltd. P3
6K Additive 24 Farsoon Technologies 7 Nikon Metrology 26 TRUMPF Inc. 43
Adaptive Corporation 29 FormAlloy Technologies, Inc. 78 nScrypt, Inc. 35 University of Louisville 76
ADDMAN Engineering 65 Formlabs D17 Photocentric 30 VacuCoat Technologies, Inc. 49
AddUp Inc P24 GE Additive D13 Pivot AM Service 28 VAC-U-MAX 4
ASTM International Additive 42 GKN Forecast 3D Additive Manufacturing P31 Plural Additive Manufacturing P37 Vorti-Siv/MM Industries, Inc. 3
Manufacturing Center of Excellence H.C. Starck Solutions 64 polySpectra 19 voxeljet America Inc. 51
Authentise Inc 32 Herding Filtration LLC 33 Pressure Technology, Inc. 27 XYZprinting, Inc. 17
BASF 3D Printing Solutions D8 HK Technologies, Inc. 15 Ramco Equipment 9 ZEISS Industrial Quality Solutions 47
Bel Air Finishing Supply 48 Hoganas 8 Rapid Prototyping Services 6
BRAYN CONSULTING LLC 67 HP 3D Printing P12 Renishaw Inc P6
CBG Biotech 10 IC3D Printers 73 RePliForm 1
CIDEAS Inc. 55 Impac Systems Engineering 68 Rosler Metal Finishing P20
Coreline Soft 11 INTAMSYS 5 RP America P13
Dinsmore Inc. P38 Keynote Photonics 74 Sciaky, Inc. 2
DMG MORI USA D11 kittyhawk 20 Sigma Labs Inc. 18
DSM D12 LINK3D, Inc. 54 SLM Solutions NA, Inc. D7
DyeMansion P7 Lithoz America, LLC 12 Solar Atmospheres 21
Dyndrite Corporation D15 LuxCreo D16 Surface Engineering 36
Elementum 3D 23 Markforged P19 Tech Met, Inc 53
EnvisionTEC P18 Massivit 3D 16 Tethon 3D 25
Essentium, Inc. D10 Materialise 56 Thermoset Solutions 22
20 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021AMUGexpo
Orlando Ballroom, Hilton Orlando
NOTE: BOOTH SELECTION STILL IN PROGRESS
SERVICE CORRIDOR
78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
12 13 36 37 60
P3 P4 P9 P10 P15 P16 P21 P22 P27 P28 P34 P35
11 14 35 38 59
10 15 34 39 58
P2 P5 P8 P11 P14 P17 P20 P23 P26 P29 P33 P36
9 16 33 40 57
8 17 32 41 56
D3 D4 D9 D10 D15 D16
7 18 31 42 55
EXIT FROM AMUGEXPO
FOYER
6 19 30 43 54
D2 D5 D8 D11 D14 P32 P37
5 20 29 44 53
4 21 28 45 52
P1 P6 P7 P12 P13 P18 P19 P24 P25 P30 P31 P38
3 22 27 46 51
2 23 26 47 50
D1 D6 D7 D12 D13 D17
1 24 25 48 49
ENTRANCE TO AMUGEXPO
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 21LOBBY LEVEL
T
I
RO P6 P5 P4
DS8 DS7 DS6
LR David’s Club
ED
Scratch Market P3
8 ELEVATORS
10 DS1 DS2 DS3 DS4 DS5
Hotel Registration
9 P2
P1 1
AV
DS11
DS10 2 Main Entrance/
DS9 Valet Parking
3
DS12 11
DS14
DS13 4
DS18
DS17
DS16
DS15 5
7
6
AMUG Pre-Conference Courses (Sat, Sun) DIAMOND SALES ROOMS DIAMOND SALES ROOMS PLATINUM SESSIONS
Information Desk 7 ASTM Certification Course DS1 Diamond Sales Room - DS1 DS10 Diamond Sales Room - DS10 P1 Platinum Speaking Session - P1
I Lake Eola, Lobby Level Bay Hill, Lobby Level Lake Down A, Lobby Level Lake Hart, Lobby Level
Lobby Level
1 AMUG Registration 6 UTOOLING | SME DS2 Diamond Sales Room - DS2 DS11 Diamond Sales Room - DS11 P2 Platinum Speaking Session - P2
Lobby Level Lake Mizell, Lobby Level Celebration, Lobby Level Lake George B, Lobby Level Lake Concord, Lobby Level
2 AMUG Office and Financial
Lake Lucerne, Lobby Level AMUG SESSIONS DS3 Diamond Sales Room - DS3 DS12 Diamond Sales Room - DS12 P3 Platinum Speaking Session - P3
Clermont, Lobby Level Lake Monroe A, Lobby Level ChampionsGate, Boardroom Lobby Level
8 Speaker Check-in 3 AMUG Track Session
Mobile App Center Lake Highland, Lobby Level
DS4 Diamond Sales Room - DS4 DS13 Diamond Sales Room - DS13
Lobby Level Thorton Park, Lobby Level Lake Florence B, Lobby Level
4 AMUG Track Session
9 AMUG Nominating Committee Lake Sheen, Lobby Level PLATINUM SALES ROOMS (PS)
Lobby Level DS5 Diamond Sales Room - DS5 DS14 Diamond Sales Room - DS14 Limited availability, by reservation only.
5 AMUG Track Session Maitland, Lobby Level Lake Florence A, Lobby Level Contact AMUG agenda@amug.com
10 AMUG Marketing Committee Lake Nona, Lobby Level
Spring LakeLobby Level PS1
AMUG Track Session DS6 Diamond Sales Room - DS6 Diamond Sales Room - DS15 Platinum Sales Room - PS1
6 DS15
Lake Mizell, Lobby Level Heathrow, Lobby Level Lake Virginia B, Lobby Level Clear Lake, Lobby Level
11 AMUG Track Leaders Committee
Lake Monroe B, Lobby Level
7 AMUG Track Session DS7 Diamond Sales Room - DS7 DS16 Diamond Sales Room - DS16 PS2 Platinum Sales Room - PS2
Lake Eola, Lobby Level Conway Lake, Lobby Level
College Park, Lobby Level Lake Virginia A, Lobby Level
PRE-CONFERENCE ACTIVITY
2 AMUG Bag Stuffing (Fri, Sat) SUPPORT TEAM DS8 Diamond Sales Room - DS8 DS17 Diamond Sales Room - DS17 PS3 Platinum Sales Room - PS3
Lake Lucerne, Lobby Level RO Red Oak Office Winter Park, Lobby Level Lake Louise B, Lobby Level Lake George B, Lobby Level
Pocket Lake, Lobby Level
AV AV Center - Lobby Level DS9 Diamond Sales Room - DS9 DS18 Diamond Sales Room - DS18
TRANSPORTATION Lake George A, Lobby Level Lake Down B, Lobby Level Lake Louise A, Lobby Level
T Buses for Tuesday Night LR Lead Retrieval
Ruby Lake, Lobby Level
ED Ed Winters Photography
Sand Lake, Lobby Level
22 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021LOWER FLOOR
D5
D3 13
AV MEDIA
D4 NM
D2
D6 D1
B
12
B D D
L
D
RO
AMUG AMUG DIAMOND SPEAKING SESSIONS DIAMOND TRAINING SESSIONS
12 AMUGexpo NM New Member Meet-up D1 Diamond Speaking Session - D1 D4 Diamond Speaking Session - D4
Orange Ballroom A-C, Lower Level Florida Ballroom 1-3, Lower Level
Orlando Ballroom, Lower Level Lower Level
13 AMUG General Session MEDIA Media Center D2 Diamond Speaking Session - D2 D5 Diamond Speaking Session - D5
Orange Ballroom, Lower Level Lobby Level Orange Ballroom D, Lower Level Florida Ballroom 5-7, Lower Level
B Breakfast D3 Diamond Speaking Session - D3 D6 Diamond Speaking Session - D6
Foyer and The Promenade, Lower Level SUPPORT TEAM Orange Ballroom E-G, Lower Level Key West A-C, Lower Level
RO Red Oak Expo Truck Center
L Lunch Load-in Access from Destination
AMUGexpo and The Promenade Parkway
D Dinner AV AV Center - Lobby Level
AMUGexpo and The Promenade Key West D, Lower Level
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 23AMUG 2019-2021
BOARD OF DIRECTORS
VINCE ANEWENTER
TREASURER
MSOE
CARL DEKKER treasurer@amug.com
PRESIDENT
MET-L-FLO
president@amug.com
GARY RABINOVITZ LESLIE FROST
CHAIRMAN SECRETARY
Reebok International GE Additive
PAUL BATES chairman@amug.com secretary@amug.com
PAST PRESIDENT
UL
pastpresident@amug.com
JAMIE CONE THOMAS SOROVETZ
VICE PRESIDENT EVENT MANAGER
BD FCA US LLC
vicepresident@amug.com eventmanager@amug.com
ANDREW ALLSHORN
TODD GRIMM
VICE PRESIDENT
AM ADVISOR
AT 3D-SQUARED LTD
T.A. Grimm &
vicepresident@amug.com
Associates
amadvisor@amug.com
The AMUG organization has been building the user group for 32 years. As an all-volunteer organization, the AMUG Board works
with individuals globally to increase awareness and build a strong additive manufacturing community. If you are interested in
joining the expanding AMUG team, contact our Nominating Committee at nomcom@amug.com.
24 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021AMUG TEAM
AMUG relies on the support of volunteers, and active participation in committees is one way to contribute. Below are the committees and the members that make them work.
CONFERENCE COMMITTEES
AGENDA & PROGRAM DINO SELECTION EVENT & HOSPITALITY EXPO (AMUGexpo) RECOGNITION
Co- Chairperson: Gary Rabinovitz, Reebok Chairperson: Gary Rabinovitz, Reebok Chairperson: Thomas Sorovetz, FCA US LLC Chairperson: Mark Wynn, Yazaki North Chairperson: Mark Barfoot, EWI
Elizabeth Goode, GoodeInk Members: Members: America
Members: Todd Grimm, T.A. Grimm & Associates Claire Belson, Emerson Members:
Andrew Allshorn, AT 3D-SQUARED LTD Kim Killoran, Stratasys Abbey Delaney, BigRep Andrew Allshorn, AT 3D-SQUARED LTD
Jamie Cone, BD Jason Lopes, Carbon Jamie Cone, BD
Jordan Weston, MSOE Larry Monahan, BD Matt Mitchell, Yazaki North America
Stefan Ritt, SPEE3D Thomas Murphy, Shapeways
Graham Tromans, G.P. Tromans Assoc. Bob Wood, ExOne
Shannon Van Deren, Layered Manufacturing
Contact: Agenda@amug.com Contact: DINO@amug.com Contact: Events@amug.com Contact: Expo@amug.com Contact: Awards@amug.com
REGISTRATION SCHOLARSHIP SPONSOR & EXHIBITOR TECHNICAL COMPETITION TRACK LEADER
Chairperson: Kevin Zaras, DSM Additive Chairperson: Brett Charlton, BD Chairperson: Jamie Cone, BD Chairperson: Bonnie Meyer Chairperson: Jordan Weston, MSOE
Members: Members: Members: Members: Members:
Vince Anewenter, MSOE Claire Belson, Emerson Automation Solutions Andrew Allshorn, AT 3D-SQUARED LTD Bruce Bradshaw, 6K Additive TTed Anderson, GE Additive
Leslie Frost, GE Additive Maddie Frank, University of Wisconsin – Jay Dinsmore, Dinsmore, Inc. Giles Gaskell, Hexagon Manufacturing
Milwaukee Youping Gou, Castheon Intelligence
Clay Guillory, Titan Robotics Ed Graham, ProtoCAM Edward Graham, ProtoCAM
Jim Harrison, Cimquest Evan Kirby, Materialise Paul Hojan, Christie Digital
Zac Holcomb, Additive America Larry Monahan, BD Colton Rooney, EMI Corporation
Sheku Kamara, MSOE Nate Schumacher, Midwest Prototyping
Rajeev Kulkarni, 3D Systems Tom Sorovetz, FCA US
Bob Markley, 3rd Dimension Industrial 3D Shannon VanDeren, Layered Mfg. & Con-
Printing sulting
Thomas Murphy, Shapeways
Contact: Registrar@amug.com Contact: Scholarship@amug.com Contact: VicePresident@amug.com Contact: TechComp@amug.com Contact: TrackLeader@amug.com
OPERATIONS COMMITTEES
EXECUTIVE FINANCE GOVERNANCE INTERNATIONAL MARKETING
Chairperson: Carl Dekker, Met-L-Flo Chairperson: Vince Anewenter, MSOE Chairperson: Leslie Frost, GE Additive Chairperson: Stefan Ritt, SPEE3D Chairperson: Kim Killoran, Stratasys
Members: Members: Members: Members: Members:
Vince Anewenter, MSOE Carl Dekker, Met-L-Flo Vince Anewenter, MSOE Andrew Allshorn, AT 3D-SQUARED LTD Todd Grimm, T.A. Grimm & Associates
Gary Rabinovitz, Reebok David Leigh, EOS North America Carl Dekker, Met-L-Flo Graham Tromans, GP Tromans Associates Kristen Eisiminger, EOS
Thomas Sorovetz, FCA Gary Rabinovitz, Reebok Nora Cibula. GE Additive Danny Levy, CATI
Dror Danai, XJet Tuan TranPham
Contact: President@amug.com Contact: Treasurer@amug.com Contact: Secretary@amug.com Contact: International@amug.com Contact: Marketing@amug.com
MEMBERSHIP NEW MEMBER NOMINATING PARTNERSHIP VOLUNTEER
Chairperson: Andrew Allshorn, AT Chairperson: Derek Ellis Chairperson: Paul Bates, UL Chairperson: Gary Rabinovitz, Reebok Chairperson: Leslie Frost, GE Additive
3D-SQUARED LTD Members: Members: Members: Members:
Members: Matthew Gray, Boeing Mark Abshire, CATI Todd Grimm, T.A. Grimm & Associates Kevin Ayers, Danfoss
Andrew Graves, DSM Additive Manufacturing Jim Harrison, AM Expert Tim Gornet, University of Louisville Elizabeth Goode, GoodeInk Gary Rabinovitz, Reebok
Jennifer Johns, Bristol University Nick Licari, CATI David Leigh, EOS North America Renee Bourdeau
Derek Ellis, Authentise Dana McCallum, Carbon Steve McDonald, L3 ISR Systems
Tryggve Rogers, Danfoss Harold Sears, Ford Motor Co.
Nate Schumacher, Midwest Prototyping
Contact: Volunteer@amug.com
Contact: Membership@amug.com Contact: NewMember@amug.com Contact: NomCom@amug.com Contact: Partners@amug.com
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 252021 AMUG CONFERENCE DIAMOND SPONSORS 26 2021 AMUG CONFERENCE - PRELIMINARY AS OF MARCH 17, 2021
TITANIUM SPONSORS GOLD/GOLD+ SPONSORS
GOLD PLUS SPONSORS
Farsoon Technologies Tethon 3D
Intamsys XYZPRINTING Inc.
Photocentric
PLATINUM SPONSORS GOLD SPONSORS
3D Metal Printing Massivit 3D
3D Printing Industry Materialise
3Dnatives Link3D
3DPrint.com Make Parts Fast
6K Additive Mechanical Engineering
Additive Manufacturing Media Metal AM
The Additive Report Midwest Prototyping
AMT Paxis LLC
ASTM International Rapid + TCT
CIDEAS INC Rapid Prototyping Services
Develop3D RePliForm, Inc.
Digital Engineering Sandvik Additive Manufacturing
Engineering.com Sciaky, Inc.
Höganäs AB Sigma Labs Inc
IC3D The TCT Group
SILVER SPONSORS
Vacucoat Technologies, Inc.
voxeljext America Inc.
LTD.
™
BRONZE SPONSORS
Pressure Technology Inc
PRELIMINARY AS OF MARCH 17, 2021 - FOR USERS. BY USERS. 272021
AMUG Conference
May 2-6, 2021
TELE
P: +1 623-242-2172
E-MAIL
info@amug.com
www.amug.com
ADDRESS
P.O. Box 510243
Milwaukee, WI 53203You can also read
