Publications of professor Salah Amroune - PEOPLE'S DEMOCRATIC REPUBLIC OF ALGERIA MINISTRY OF HIGHER EDUCATION AND SCIENTIFIC RESEARCH
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PEOPLE'S DEMOCRATIC REPUBLIC OF ALGERIA
MINISTRY OF HIGHER EDUCATION AND SCIENTIFIC RESEARCH
Publications of professor Salah Amroune
09-02-2022Title Link
Investigation of the Date Palm Fiber for Green Composites https://www.tandfonline.com/doi/abs/10.1080/15440478.2
Reinforcement: Thermo-physical and Mechanical 019.16457911
Properties of the Fiber
Investigation of the date palm fiber for green composites https://www.sciencedirect.com/science/article/pii/S092666
reinforcement: Quasi-static and fatigue characterization of 90203005102
the fiber
Characterization of a novel natural cellulosic fiber from https://www.sciencedirect.com/science/article/pii/S014486
Juncus effusus L. 17173049523
Mechanical Characterisation and Optimization of https://link.springer.com/article/10.1007/s00170-020-
Delamination Factor in Drilling Bidirectional Jute Fibre- 06217-64
Reinforced Polymer Biocomposites
Brittle fracture investigation from disc specimen weakened http://m.growingscience.com/beta/esm/3889-brittle-
by U- notch in mixed mode I + II. fracture-investigation-from-disc-specimen-weakened-by-u-
notch-in-mixed-mode-i-ii.html5
Tensile mechanical properties and surface chemical https://www.sciencedirect.com/science/article/pii/S135983
sensitivity of technical fibres from date palm fruit branches 5X140039476
(Phoenix dactylifera L.)
Statistical and Experimental Analysis of the Mechanical https://www.tandfonline.com/doi/abs/10.1080/15440478.2
Properties of Flax Fibers 020.17757517
Effect of eco-friendly chemical sodium bicarbonate https://link.springer.com/article/10.1007/s00170-019-
treatment on the mechanical properties of flax fibres: 04628-88
Weibull statistics
Impact of surface treatment of flax fibers on tensile https://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view
mechanical properties accompanied by a statistical study /33769
Evaluation of mechanical properties of jute yarns by two- /////10
and three-parameters weibull method
Analyse statistique et effet des traitements chimique sur le https://www.ajol.info/index.php/srst/article/view/12544611
comportement physico-mécanique des fibres des bras de
grappe des palmiers dattier.
New approach for computer-aided static balancing of https://yadda.icm.edu.pl/baztech/element/bwmeta1.element
turbines rotors .baztech-62497ef8-71cd-46ff-9783-1647a0a2237d12
EXPERIMENTAL INVESTIGATIONS OF SURFACE https://yadda.icm.edu.pl/yadda/element/bwmeta1.element.b
WEAR BY DRY SLIDING AND INDUCED DAMAGE aztech-1721d18a-6639-4dc7-b17a-36e201cb43f513
OF MEDIUM CARBON STEEL
The analysis and effects of flow acoustic in a commercial https://books.google.com/books?hl=fr&lr=&id=VU-
automotive exhaust system fDwAAQBAJ&oi=fnd&pg=PA197&dq=The+analysis+an
d+effects+of+flow+acoustic+in+a+commercial+automotiv
e+exhaust+system&ots=F9c_Dz3sSs&sig=flwuZDeFSV6
WoKscG5joOqszjA414
Geometric regeneration and mechanical analysis of a gas http://m.growingscience.com/beta/esm/2734-geometric-
turbine blade type Frame 9001 GE regeneration-and-mechanical-analysis-of-a-gas-turbine-
blade-type-frame-9001-ge.html15
Quantitatively Investigating the Effects of Fiber Parameters https://www.tandfonline.com/doi/abs/10.1080/15440478.2
on Tensile and Flexural Response of Flax/Epoxy 020.181783116
Biocomposites
Caractérisations mécaniques et étude de l’endommagement https://www.ccdz.cerist.dz/admin/notice.php?id=00000000
des matériaux composites renforcés par des fibres de 00000070501800029117
palmier
A comparison between hybrid method technique and https://scindeks.ceon.rs/article.aspx?artid=1451-
transfer matrix method for design optimization of vehicle 20922102494M18
muffler
A hybrid method technique for design and optimization of https://akjournals.com/view/journals/1848/11/2/article-
Formula race car exhaust muffler p174.xml19High gradient magnetic separation method for weakly https://mfint.imp.kiev.ua/en/abstract/v41/i08/1103.html20
magnetic particles: An Industrial Application of iron metals
Fluid dynamic and acoustic optimization methodology of a https://yadda.icm.edu.pl/baztech/element/bwmeta1.element
formula-student race car engine exhaust system using .baztech-cf256b32-3365-4784-8dc2-b30b3911ae6121
multilevel numerical CFD models
Elaboration and Characterization of Flax Fiber Reinforced https://www.tandfonline.com/doi/abs/10.1080/15440478.2
High Density Polyethylene Biocomposite: Effect of the 020.184873722
Heating Rate on Thermo-mechanical Properties
Engineering Solid Mechanics https://api.taylorfrancis.com/content/books/mono/downloa
d?identifierName=doi&identifierValue=10.1201/97802037
57307&type=googlepdf23
Réhabilitation d'un rotor turbine à vapeur et contribution à https://www.ccdz.cerist.dz/admin/notice.php?id=12238324
l'élaboration d'un logiciel de répartition d'aubes
Contribution à l'étude et à la caractérisation de l'état de https://www.pnst.cerist.dz/detail.php?id=22987/25
surface usinée
Effect of Pre-Post TIG Welding Heat Treatment on Cast NI https://www.gup.ugal.ro/ugaljournals/index.php/awet/articl
Superalloy e/view/408426
Dessin Assisté par Ordinateur DAO https://www.researchgate.net/profile/Salah-
Amroune/publication/314444407_Dessin_assiste_par_ordi
nateur/links/5aa89d03458515b024fb10fb/Dessin-assiste-
par-ordinateur.pdf27
Investigation of perforated tube configuration effect on the http://cejsh.icm.edu.pl/cejsh/element/bwmeta1.element.oai-
performance of exhaust mufflers with mean flow based on journals-pan-pl-120788/c/oai-journals-pan-pl-120788_full-
three-dimensional analysis text_aoa.2021.138148.pdf-128
High-Gradient Magnetic Separation Method for Weakly https://mfint.imp.kiev.ua/en/abstract/v41/i08/1103.html29
Magnetic Particles: an Industrial Application
Characterization and mechanical behaviour of similar and http://dspace.univ-
dissimilar parts joined by rotary friction welding msila.dz:8080/xmlui/handle/123456789/2042830
Determination of the rupture parameters of a plant fiber by https://www.sciencedirect.com/science/article/pii/S221478
using two diameter measurement techniques 532200075X31
ETUDE ET REALISATION D’UNE PIECE SUR http://dspace.univ-
MACHINE A COMMANDE NUMERIQUE TYPE F1 msila.dz:8080/xmlui/handle/123456789/1611532
CNC EMCO
Manufacturing of rapid prototypes of mechanical parts https://www.researchgate.net/profile/Salah-
using reverse engineering and 3D Printing Amroune/publication/357323063_Manufacturing_of_rapid
_prototypes_of_mechanical_parts_using_reverse_engineeri
ng_and_3D_Printing/links/61c6bd70da5d105e55f66c87/M
anufacturing-of-rapid-prototypes-of-mechanical-parts-
using-reverse-engineering-and-3D-Printing.pdf33
MECHANICAL, PHYSICAL AND CHEMICAL https://content.iospress.com/articles/journal-of-
CHARACTERIZATION OF JUTE YARNS AND BIO- computational-methods-in-sciences-and-
COMPOSITES engineering/jcm77634
Contribution à l’étude de l’équilibrage statique des rotors http://dspace.univ-
turbines msila.dz:8080/xmlui/handle/123456789/666035
The effect of the gage length and the diameter on the https://www.sciencedirect.com/science/article/pii/S014486
mechanical properties of a new lignocellulosic fibre 171730495236
(Juncus effusus L.)
EXPERIMENTALLY CHARACTERIZATION OF THE https://www.sciencedirect.com/science/article/pii/S014211
FATIGUE BEHAVIOR OF LONG DATE PALM FIBERS 231730255437
Mechanical characterization of bio-composite laminates https://www.tandfonline.com/doi/abs/10.1080/15440478.2
reinforced with date palm fibres under 3-point bending. 020.181783138
Extraction, caractérisation physico-chimique et mécanique http://depot-e.uqtr.ca/id/eprint/7971/1/031471857.pdf39
d’une nouvelle fibre végétale (Juncus effusus L.)
Etude du comportement en traction des fibres de Palmier https://www.ajol.info/index.php/srst/article/view/12544640
Dattier traitées et non traitées afin d’être utilisées dans des
matériaux compositesExtraction, caractérisation et effet du traitement chimique https://www.ajol.info/index.php/srst/article/view/12544641
sur les propriétés mécaniques des fibres naturelles de
Palmier Dattier
Influence of heat treatments on the Impact strength For https://link.springer.com/article/10.1007/BF0267062142
welded constructions
MEMOIRE DE FIN D’ETUDE http://dspace.univ-
msila.dz:8080/xmlui/handle/123456789/2729543
Etude de la liaison entre le PC et la MOCN type EMCO http://dspace.univ-
CNC msila.dz:8080/xmlui/handle/123456789/202044
Dessin assisté par ordinateur (DAO) https://www.researchgate.net/profile/Salah-
Amroune/publication/314444407_Dessin_assiste_par_ordi
nateur/links/5aa89d03458515b024fb10fb/Dessin-assiste-
par-ordinateur.pdf45
EVALUATION OF MECHANICAL PROPERTIES OF //////46
JUTE YARNS BY TWO-AND THREE-PARAMETERS
WEIBULL METHOD PROCENA MEHANIČKIH
SVOJSTAVA PREDIVA KONOPLJE PRIMENOM
DVO-I TRO-PARAMETARSKOG …
References:
1
AMROUNE, Salah, BEZAZI, Abderrezak, DUFRESNE, Alain, et al. Investigation of the date palm fiber for green
composites reinforcement: thermo-physical and mechanical properties of the fiber. Journal of Natural Fibers, 2021,
vol. 18, no 5, p. 717-734.
2
BEZAZI, Abderrezak, AMROUNE, Salah, SCARPA, Fabrizio, et al. Investigation of the date palm fiber for green
composites reinforcement: Quasi-static and fatigue characterization of the fiber. Industrial Crops and Products, 2020,
vol. 146, p. 112135.
3
MAACHE, Mabrouk, BEZAZI, Abderrezak, AMROUNE, Salah, et al. Characterization of a novel natural cellulosic
fiber from Juncus effusus L. Carbohydrate polymers, 2017, vol. 171, p. 163-172.
4
BELAADI, Ahmed, BOUMAAZA, Messaouda, AMROUNE, Salah, et al. Mechanical characterization and
optimization of delamination factor in drilling bidirectional jute fibre -reinforced polymer biocomposites. The
International Journal of Advanced Manufacturing Technology, 2020, vol. 111, no 7, p. 2073-2094.
5
MOUSSAOUI, Mustafa, AMROUNE, Salah, TAHIRI, Antar, et al. Brittle fracture investigation from disc specimen
weakened by U-notch in mixed mode I+ II. Engineering Solid Mechanics, 2020, vol. 8, no 4, p. 337-352.
6
AMROUNE, Salah, BEZAZI, Abderrezak, BELAADI, Ahmed, et al. Tensile mechanical properties and surface
chemical sensitivity of technical fibres from date palm fruit branches (Phoenix dactylifera L.). Composites Part A:
Applied Science and Manufacturing, 2015, vol. 71, p. 95-106.
7
AMROUNE, Salah, BELAADI, Ahmed, BOURCHAK, Mostefa, et al. Statistical and experimental analysis of the
mechanical properties of flax fibers. Journal of Natural Fibers, 2020, p. 1-15.
8
BELAADI, Ahmed, AMROUNE, Salah, et BOURCHAK, Mostefa. Effect of eco-friendly chemical sodium
bicarbonate treatment on the mechanical properties of flax fibres: Weibull statistics. The International Journal of
Advanced Manufacturing Technology, 2020, vol. 106, no 5, p. 1753-1774.
9
BEDJAOUI, Azzedine, BELAADI, Ahmed, AMROUNE, Salah, et al. Impact of surface treatment of flax fibers on
tensile mechanical properties accompanied by a statistical study. International Journal of Integrated Engineering, 2019,
vol. 11, no 6, p. 10-17.10
SAAIDIA, Aziz, BEZAZI, Abderrezak, BELBAH, Ahmed, et al. Evaluation of mechanical properties of jute yarns
by two-and three-parameters weibull method. Structural Integrity and Life-integritet I Vek Konstrukcija, 2015, vol. 15,
no 3, p. 157-162.
11
BEZAZI, Abderrezak, AMROUNE, Salah, et SCARPA, Fabrizo. Analyse statistique et effet des traitements
chimique sur le comportement physico-mécanique des fibres des bras de grappe des palmiers dattier. Synthèse: Revue
des Sciences et de la Technologie, 2015, vol. 31, p. 108-120.
12
AMROUNE, Salah, BELAADI, Ahmed, MENASRI, Noureddine, et al. New approach for computer-aided static
balancing of turbines rotors. Diagnostyka, 2019, vol. 20.
13
ELHADI, Abdelmalek, AMROUNE, Salah, ZAOUI, Moussa, et al. Experimental investigations of surface wear by
dry sliding and induced damage of medium carbon steel. Diagnostyka, 2021, vol. 22.
14
MOHAMAD, B. et AMROUNE, S. The analysis and effects of flow acoustic in a commercial automotive exhaust
system. In : Advances and Trends in Engineering Sciences and Technologies III, Proceedings of the 3rd International
Conference on Engineering Sciences and Technologies (ESaT 2018), September 12 –14, 2018, High Tatras Mountains,
Tatranské Matliare, Slovak Republic. 2019. p. 197-202.
15
AMROUNE, S., MOHAMAD, B., MOUSSAOUI, M., et al. Geometric regeneration and mechanical analysis of a
gas turbine blade type Frame 9001 GE. Engineering Solid Mechanics, 2018, vol. 6, no 2, p. 105-112.
16
AMROUNE, Salah, BELAADI, Ahmed, DALMIS, Ramazan, et al. Quantitatively Investigating the effects of fiber
parameters on tensile and flexural response of flax/epoxy biocomposites. Journal of Natural Fibers, 2020, p. 1-16.
17
AMROUNE, Salah. Caractérisations mécaniques et étude de l’endommagement des matériaux composites renforcés
par des fibres de palmier. 2016. Thèse de doctorat. GUELMA.
18
MOHAMAD, Barhm, KAROLY, Jalics, ZELENTSOV, Andrei, et al. A comparison between hybrid method
technique and transfer matrix method for design optimization of vehicle muffler. FME Transactions, 2021, vol. 49, no
2, p. 494-500.
19
MOHAMAD, Barhm, KAROLY, Jalics, ZELENTSOV, Andrei, et al. A hybrid method technique for design and
optimization of Formula race car exhaust muffler. International Review of Applied Sciences and Engineering , 2020.
20
FARSI, Chouki, AMROUNE, Salah, MOUSSAOUI, Mustafa, et al. High-Gradient Magnetic Separation Method for
Weakly Magnetic Particles: an Industrial Application. Metallofiz. Noveishie Tekhnol, 1951, vol. 41, p. 1103-1119.
21
MOHAMAD, Barhm, ALI, Mohammed Qasim, NEAMAH, Hayder Ahmed, et al. Fluid dynamic and acoustic
optimization methodology of a formula-student race car engine exhaust system using multilevel numerical CFD
models. Diagnostyka, 2020, vol. 21.
22
MAKHLOUF, Azzedine, BELAADI, Ahmed, AMROUNE, Salah, et al. Elaboration and characterization of flax
fiber reinforced high density polyethylene biocomposite: effect of the heating rate on thermo -mechanical
properties. Journal of Natural Fibers, 2020, p. 1-14.
23
RAGAB, Abdel-Rahman et BAYOUMI, Salah Eldin. Engineering solid mechanics: fundamentals and applications.
CRC Press, 2018.
24
AMROUNE, Salah. Réhabilitation d'un rotor turbine à vapeur et contribution à l'élaboration d'un logiciel de
répartition d'aubes. 2001. Thèse de doctorat. M'sila, Université Mohamed Boudiaf. Institut de Genie Mecanique.
25
AMROUNE, Salah. Contribution à l'étude et à la caractérisation de l'état de surface usinée . Thèse de doctorat.
Université de Sétif 1-Ferhat Abbas.26
SAIB, C., ZAOUI, M., MENASRI, N., et al. Effect of Pre-Post TIG Welding Heat Treatment on Cast NI
Superalloy. Annals of “Dunarea de Jos” University of Galati. Fascicle XII, Welding Equipment and Technology , 2020,
vol. 31, p. 35-42.
27
AMROUNE, Salah. Dessin Assisté par Ordinateur DAO. Éditions universitaires européennes, 2018.
28
MOHAMAD, Barhm, KAROLY, Jalics, ZELENTSOV, Andrei, et al. Investigation of perforated tube configuration
effect on the performance of exhaust mufflers with mean flow based on three -dimensional analysis. Archives of
Acoustics, 2021, vol. 46, no 3.
29
FARSI, Chouki, AMROUNE, Salah, MOUSSAOUI, Mustafa, et al. High-Gradient Magnetic Separation Method for
Weakly Magnetic Particles: an Industrial Application. Metallofiz. Noveishie Tekhnol, 1951, vol. 41, p. 1103-1119.
30
HOURIA, Benkherbache. Characterization and mechanical behaviour of similar and dissimilar parts joined by rotary
friction welding. 2020.
31
KHALDOUNE, Abd Raouf, ROKBI, Mansour, AMROOUNE, Salah, et al. Determination of the rupture parameters
of a plant fiber by using two diameter measurement techniques. Materials Today: Proceedings, 2022.
32
AHMED SAID, ZEDAME. ETUDE ET REALISATION D’UNE PIECE SUR MACHINE A COMMANDE
NUMERIQUE TYPE F1 CNC EMCO. 2019. Thèse de doctorat. UNIVERSITE MOHAMED BOUDIAF-M’SILA.
33
AMROUNE, Salah, BELAADI, Ahmed, ZAOUI, Moussa, et al. Manufacturing of rapid prototypes of mechanical
parts using reverse engineering and 3D Printing. Journal of the Serbian Society for Computational Mechanics/Vol ,
2021, vol. 15, no 2, p. 1-10.
34
HAMZA, Bouguessir, ELHADI, Harkati, MANSOUR, Rokbi, et al. Physico-chemical and mechanical
characterization of Jute fabrics for civil engineering applications. Journal of Computational Methods in Sciences and
Engineering, 2018, vol. 18, no 1, p. 129-147.
35
HOUARI, A. M. I. N. Contribution à l’étude de l’équilibrage statique des rotors turbines. 2018. Thèse de doctorat.
Université Mohamed Boudiaf-M’sila.
36
MAACHE, Mabrouk, BEZAZI, Abderrezak, AMROUNE, Salah, et al. Characterization of a novel natural cellulosic
fiber from Juncus effusus L. Carbohydrate polymers, 2017, vol. 171, p. 163-172.
37
SALEH, Menna A., AL HARON, Mohamed H., SALEH, Aya A., et al. Fatigue behavior and life prediction of
biodegradable composites of starch reinforced with date palm fibers. International Journal of Fatigue, 2017, vol. 103,
p. 216-222.
38
AMROUNE, Salah, BELAADI, Ahmed, DALMIS, Ramazan, et al. Quantitatively Investigating the effects of fiber
parameters on tensile and flexural response of flax/epoxy biocomposites. Journal of Natural Fibers, 2020, p. 1-16.
39
EL OMARI, Hind. Matériaux lignocellulosiques fonctionnels à partir de plantes vivaces marocaines et de pâtes
commerciales. 2016. Thèse de doctorat. Université du Québec à Trois -Rivières.
40
BEZAZI, Abderrezak, AMROUNE, Salah, et SCARPA, Fabrizo. Analyse statistique et effet des traitements
chimique sur le comportement physico-mécanique des fibres des bras de grappe des palmiers dattier. Synthèse: Revue
des Sciences et de la Technologie, 2015, vol. 31, p. 108-120.
41
BEZAZI, Abderrezak, AMROUNE, Salah, et SCARPA, Fabrizo. Analyse s tatistique et effet des traitements
chimique sur le comportement physico-mécanique des fibres des bras de grappe des palmiers dattier. Synthèse: Revue
des Sciences et de la Technologie, 2015, vol. 31, p. 108-120.
42
CORTIAL, F., CORRIEU, J. M., et VERNOT-LOIER, C. Influence of heat treatments on microstructure, mechanical
properties, and corrosion resistance of weld alloy 625. Metallurgical and Materials Transactions A, 1995, vol. 26, no 5,
p. 1273-1286.43
MCA, BOUDILMI Aissa, MAA, MOUSSAOUI Nafissa, et MCA, SAIB Cherif. MEMOIRE DE FIN D’ETUDE.
44
WAFA, Ammari. Contribution à l’étude d’un système CFAO pour les machines outils EMCO CNC . 2017. Thèse de
doctorat. Faculte de technologie/UniversiteMohamed Boudiaf-M’sila.
45
AMROUNE, Salah. Dessin Assisté par Ordinateur DAO. Éditions universitaires européennes, 2018.
46
SAAIDIA, Aziz, BEZAZI, Abderrezak, BELBAH, Ahmed, et al. Evaluation of mechanical properties of jute yarns
by two-and three-parameters weibull method. Structural Integrity and Life-integritet I Vek Konstrukcija, 2015, vol. 15,
no 3, p. 157-162.You can also read
