Moscow, 08-10 June 2021 - DATE FOR 27 January - wire

 
CONTINUE READING
Moscow, 08-10 June 2021 - DATE FOR 27 January - wire
Moscow,
         08–10 June 2021
                   Russia I www.wire-russia.com

                                                    CLOSING
                                                            R
                                                    DATE FO
                                                          TIONS:
                                                  APPLICA
                                                             ry
                                                    27 Janua
                                                       2021

Supported by

               In conjunction with
GB

A    Application
     Page 1 of 2
                                                                                                             For use by Messe Düsseldorf only:

                                                                                                             Kunden-Nummer
                                                                                                                                                                   1.0

                                                                                                             Auftragsnummer

                                                                                                             Online-Anmeldung ID

                                                                                                                                                                                  The International
                                                                                                                                                                                  Wire and Cable
                                                                                                                                                                                  Trade Fair in Russia
                                                                                                            Closing date for applications:                                      8 – 10 June 2021
                                                                                                                                                                                  Moscow, Russia
          Messe Düsseldorf GmbH                                                                             27 January 2021
          U1 – P14 / Ms. Caroline Schmidt
                                                                                                            Phone:          +49 211 45 60 - 7271
          Postfach 10 10 06
          40001 Düsseldorf                                                                                  Fax:            +49 211 45 60 - 877271
          Germany                                                                                           E-mail:         SchmidtCa@messe-duesseldorf.de
                                                                                                            Website:        www.wire-russia.com

      1         Legal name and address of the exhibitor*
                (contract partner/service recipient* of Messe Düsseldorf GmbH)
                                                                                                             2       Product categories (Form B)

        !       Our media partner will contact you regarding your catalogue/website
                presentation in good time.
                                                                                                             Please note that product codes are not automatically listed in the catalogue!

       Company **

                                                                                                             Main area of presentation**
                                                                                                             (list one only):

       Street **
                                                                                                             3       Application for stand space
                                                                                                                     The following details under 3.1 and 3.2 can only be taken into account
                                                                                                                     where feasible and cannot be regarded as a condition of participation.

       Post Code **       City **                                                                                    Registration fee:                                                    600.- EUR

                                                                                                              3.1 Minimum size: 12 m         2

       P.O. Box **                                 Post Code **                                                     Area in m2                   Width in meters                Depth in meters

                                                                                                                                             min.             max.             min.            max.
       Country **

       Company phone **                            Company fax **
                                                                                                              3.2 Stand type and prices
                                                                                                                       Space only                                         Standard stand construction
                                                                                                                       min 20 m2
                                                                                                                     please tick                                          inculding stand space per m2
       Our parent company is located (country)

                                                                                                                     			                                                  Details for furnishing
                                                                                                                     			                                                  and design (Form D)
       Website **
                                                                                                                     Row stand – 1 side open 355.– EUR/m2                      Basic package
                                                                                                                     			                                                       (min 12 m2) 380.– EUR
       Company E-Mail **                                                                                             			                                                       Premium package
                                                                                                                     			                                                       (min 18 m2) 440.– EUR

       Our contact person – first name/surname                    Phone                                              Corner stand – 2 sides open 355.– EUR/m2                  Basic package
                                                                                                                     			                                                       (min 12 m2) 380.– EUR
                                                                                                                     			                                                       Premium package
                                                                                                                     			                                                       (min 18 m2) 440.– EUR
       E-Mail                                                     Fax
                                                                                                                     End of block – 3 sides open 355.– EUR/m2		                Basic package
                                                                                                                     				                                                      (min 12 m2) 380.– EUR
       Our Managing Director – first name/surname
                                                                                                                                                                               Premium package
                                                                                                                     				                                                      (min 18 m2) 440.– EUR

                                                                                                                     Island side – 4 sides open 355.– EUR/m2		                 Basic package
       Our order number                                                                                              				                                                      (min 12 m2) 380.– EUR

                                                                                                                                                                               Premium package
                                                                                                                     				                                                      (min 18 m2) 440.– EUR
       VAT ID
                                                                                                                     We request a customised stand construction proposal instead of
       I herewith confirm that the company (= exhibitor) is an entrepreneur and that all future                      standard construction
       services of Messe Düsseldorf GmbH will exclusively be purchased for our business.
       in addition only for companies within EU: I herewith confirm that all future services of Messe
       Düsseldorf GmbH will be purchased under the explicit use of the VAT-ID No. above mentioned.           Details of main exhibit:

                                                                                                               Height in meters       Width in meters       Length in meters          Weight in kg
       Legal (corporate) structure                                                                            3.3         We exhibited at the last show                  Stand No.

     * after notification of admission by Messe Düsseldorf GmbH                                             In the absence of any statutory ruling to the contrary, all prices are to be understood
                                                                                                            as subject to German turnover tax at the statutory rate.
     ** The basic entry in the catalogue and on the Internet includes company name, address, and            Data protection regulations see www.messe-duesseldorf.de
     contact information, as well as the main area of presentation mentioned. You will receive additional
     catalogue and portal entry options from the respective publisher after notification of admission.
                                                                                                                                                                                                page		2
GB

A    Application                                                                                                       Closing date for applications:

     Page 2 of 2                                                                                                       27 January 2021

      Please re-enter details
                                                                                                                       Phone: +49 211 45 60 - 7271
       Company
                                                                                                                       Fax:     +49 211 45 60 - 877271
                                                                                                                       SchmidtCa@messe-duesseldorf.de
                                                                                                                       www.wire-russia.com                                                 The International
                                                                                                                                                                                           Wire and Cable
                                                                                                                                                                                           Trade Fair in Russia
       Post Code            City
                                                                                                                                                                                          8 – 10 June 2021
                                                                                                                                                                                           Moscow, Russia

      4         No. of proposed co-exhibitors:                                                                          7      Invoicing (choose only one)

                The registration of co-exhibiting companies (form E) must also obligatorily be                                 Electronic invoicing:
                                                                                                                               (pursuant to clause 3 of the General Terms of Participation)
                submitted for each co-exhibitor. The exhibitor will receive in due time via email
                further information about the online invitation/registration. Please note: the                                 Would you email us the Messe Düsseldorf invoice, with the PDF file
                                                                                                                               attached. For VAT regulatory reasons invoices will always be issued to
                registration fee is payable for each co-exhibitor.                                                             the exhibitor listed under item 1.
                                                                                                                               The exhibitor guarantees proper invoice processing by the recipient.
                                                                                                                               Please send the electronic invoice to us at the following e-mail address:

       5        We exhibit:                                                                                                    via e-mail to
                    Machinery for the manufacture of                      Testing technology, sensor technology and      or
                    rods, wires and strips (1)                            quality assurance for the wire and cable
                                                                          industry (5)
                    Machinery for the processing of
                    rods, wires and strips (2)                            Environmental technologies and resource
                                                                                                                               Invoicing by mail:
                    Tools and auxiliary materials and agents
                                                                          efficiency for the wire and cable                    We prefer receiving the invoice by mail. For VAT regulatory reasons
                    for the manufacture of drawn wire and the
                                                                          industry (6)                                         invoices will always be issued to the exhibitor listed under item 1.
                    further processing of wire products (3)               Software and various services for the wire
                    Wire and wire products (4)
                                                                          and cable industry (7)                                        to the address of the exhibitor listed under item 1
      5.1 n Registered/incorporated company                                           yes                  no
                                                                                                                                        to the following billing address
                  City

                  No.                                                   since
      5.2 n International target markets:                                                                                      Company

                    Africa                    Asia             China                    Europe
                    India                     Indonesia        Iran                     South America
                    USA                       None of the above
                                                                                                                               Street
      5.3 n Target groups from the following segments:
                    Wire industry (1)                                 Cable industry (2)                                       Post Code          City
                    Iron, steel and non-ferrous metals (3)            Automotive supply industry (4)
                    Aerospace supply industry (5)                     Electrical industry (6)                                  Country
                    Construction industry (7)                         Skilled trade (8)
                    Associations (9)
                                                                                                                        8      Comments

      6         Third party authorised signatory for all legally binding
                actions for the exhibitor – after being approved as an
                exhibitor (incl. authority to accept legal documents)
                Third party authorized signatory cannot however be considered as the exhibitor.
                                                                                                                       By signing this application we accept as binding the Conditions of Participation as issued by
                To be completed only if different from company address above.                                          Messe Düsseldorf GmbH, Düsseldorf.
                                                                                                                       The place of performance and jurisdiction for all mutual obligations is Düsseldorf or, at
                                                                                                                       the request of Messe Düsseldorf, the jurisdiction of the exhibitor‘s place of business. This
                                                                                                                       also applies to actions under the Bills of Exchange/Cheques Act.
       Company

       Name – first name/surname

       Street

       Post Code            City

                                                                                                                       Place, Date
       Country

       Phone                                                    Fax

       E-Mail

     Data protection regulations see www.messe-duesseldorf.de                                                          Legally binding signature and company stamp of the exhibitor listed under 1

                                                                                                                                                                                                          page		3
GB

B    Product categories

                                                                                                                                  The International
                                                                                                                                  Wire and Cable
                                                                                                                                  Trade Fair in Russia
                                                                                                                                8 – 10 June 2021
                                                                                                                                  Moscow, Russia

        1         Machinery for the manufacture of rods, wires and strips      2.3.8.2   Cold pressure welding machines
                                                                               2.3.8.3   Special purpose welding machines
        1.1       Casting
                                                                               2.3.8.4   Systems for soldering
        1.1.1     Continuous casting lines
                                                                               2.3.8.5   Wire and rope welding machines
        1.1.2     Other casting systems
                                                                               2.3.8.6   Other welding machines
        1.1.3     Continuous cast rod process lines (CCR process)
                                                                               2.3.8.7   Wire connection of coils
        1.2       Rolling                                                     2.3.9      Single-wire drawing machines (intermediate, fine and
        1.2.1     Hot rolling lines                                         		           superfine wire drawing)
        1.2.2     Cold rolling lines                                           2.3.10    Multiwire drawing machines
                                                                               2.3.11    Tandem wire drawing lines for telephone cables
        1.3       Extrusion
                                                                               2.3.12    Inline wire drawing lines for data cables
        1.3.1     Extrusion lines (for metals)
                                                                               2.3.13    Machines for the manufacture of enamelled wires
        1.4       Drawing                                                      2.3.14    Welding wire manufacturing lines
        1.4.1     Rod breakdown lines                                          2.3.15    Other wire manufacturing machines

        2         Machinery for the processing of rods, wires and strips     2.4         Machinery for the heat treatment of wires and
                                                                            		           strips
        2.1       Handling systems
                                                                               2.4.1     Continuous resistance annealers
        2.1.1     Wire pay-off systems
                                                                               2.4.2     Bell furnaces
        2.1.2     Rewinding systems for wire
                                                                               2.4.3     Continuous induction annealers
        2.1.3     Coilers and spoolers for wire
                                                                               2.4.4     Patenting lines
        2.1.4     Machines for the strapping of coils
                                                                               2.4.5     Oil tempering lines
        2.1.5     Cutting systems
                                                                               2.4.6     Other heat treatment lines
        2.1.6     Other handling systems
                                                                               2.4.7     Drying furnaces and paint baking furnaces
        2.1.7     Coiling and decoiling systems for strips
                                                                               2.4.8     Annealing furnaces with inert gas
        2.1.8     Systems for automatic reel swap
                                                                               2.4.9     Annealing furnaces without inert gas
        2.2       Machinery for the processing of rods                         2.4.10    Vacuum annealing furnaces
        2.2.1     Rod straightening machines
                                                                             2.5         Machinery for the surface treatment of wires and
        2.2.2     Rod cutting machines                                      		           strips
        2.2.3     Rod straightening and cutting machines                       2.5.1     Pickling and descaling lines for wires
        2.2.4     Rod drawing machines                                         2.5.2     Brushing lines for wire rod
        2.2.5     Rod separating machines                                      2.5.3     Wire cleaning lines
        2.2.6     Rod peeling machines                                         2.5.3.1   Ultrasonic cleaning lines for wires
        2.2.7     Bundling and tying-off lines for rods                        2.5.3.2   Airwipes
        2.2.8     Pointing machines for rods                                   2.5.4     Coating lines for wires
        2.2.9     Welding machines                                             2.5.4.1   Galvanic wire plating lines
        2.2.9.1   Butt welding machines                                        2.5.4.2   Enamelling lines for wires
        2.2.9.2   Cold pressure welding machines                               2.5.4.3   Galvanizing lines
                                                                               2.5.4.4   Other surface treatment lines
        2.3       Machinery for the processing of wires and strips
                                                                               2.5.4.5   Metal coating (chemical, electroplating etc.)
        2.3.1     Wire single-block drawing systems
                                                                               2.5.5     Cleaning lines for coils
        2.3.2     Multiple drawing machines for wire
        2.3.2.1   Lubricant application equipment                              2.6       Machinery for the manufacture of cables
        2.3.2.2   Other Multiple drawing machines for wire                     2.6.1     Pay-off systems for wires and cables
        2.3.3     Wire stretching lines                                        2.6.2     Bunching machines
        2.3.4     Draw-peeling machines for wire                               2.6.3     Foil pay-off and taping systems
        2.3.5     Wire reduction rolling mills                                 2.6.3.1   Cable filling machines
        2.3.6     Strip rolling mills                                        2.6.3.2     Tape Application machinery, with/without
        2.3.7     Pointing and threading up machines for wire               		           auto-splicing
        2.3.7.1   Hammering machines                                           2.6.4     Accumulators
        2.3.8     Welding machines                                             2.6.5     Stranding machines
        2.3.8.1   Butt welding machines                                        2.6.5.1   Bow stranding machines

                                                                                                                                               page		4
GB

B    Product categories

                                                                                                                        The International
                                                                                                                        Wire and Cable
                                                                                                                        Trade Fair in Russia
                                                                                                                    8 – 10 June 2021
                                                                                                                        Moscow, Russia

        2.6.5.2    Rigid stranding machines                          2.9        Machinery for the manufacture of wire mesh, wire
        2.6.5.3    Tubular stranding machines                      		           cloth and wire netting
        2.6.5.4    Planetary stranding machines                      2.9.1      Wire mesh welding machines
        2.6.5.5    Drum twisters                                     2.9.2      Wire weaving machines
        2.6.5.6    Single twist stranding machines                   2.9.3      Wire netting machines
        2.6.5.7    Double twist stranding machines                   2.9.3.1    Chain link fence machines
        2.6.6      Braiding machines                                 2.9.3.2    Hexagonal wire netting machines
        2.6.7      Spiraling machines                                2.9.3.3    Wire fence machines
        2.6.8      Winding machines for braiding bobbins             2.10       Machinery for the manufacture of springs, chains,
        2.6.9      Powder-coating machines                         		           and punched and bent parts
        2.6.10     Compounding plants                                2.10.1     Tension spring coiling machines
        2.6.11     Extrusion lines                                   2.10.2     Torsion / leg spring coiling machines
        2.6.11.1   Extrusion machines                                2.10.3     Compression spring coiling machines
        2.6.11.2   Other extrusion systems                           2.10.4     Spring end grinding machines
        2.6.12     Sheathing lines                                   2.10.5     Spiral spring coiling machines
        2.6.13     Crosslinking lines                                2.10.6     Other spring coiling machines
        2.6.14     Cutting and crimping machines                     2.10.7     Chain bending machines
        2.6.14.1   Insulation strippers for cables                   2.10.8     Chain welding machines
        2.6.15     Machines for cable marking                        2.10.9     Chain bending and welding machines
        2.6.16     Lead extruders                                    2.10.10    Chain calibration machines
        2.6.17     Take-ups and coilers for cables                   2.10.11    Bending machines
        2.6.18     Spoolers for cables                               2.10.11.1 Single-head wire bending machines
        2.6.19     Haul-off devices for cables                       2.10.11.2 Multiple-head wire bending machines
        2.6.19.1   Wheel / disc type haul-offs                       2.10.11.3 Wire and strip bending machines
        2.6.19.2   Belt type haul-offs                               2.10.11.4 Ring coiling machines
        2.6.19.3   Caterpillar haul-offs                             2.10.11.5 Other bending machines
        2.6.20     Cable stripping machines                          2.10.12    Punching and bending machines
        2.6.21     Machines for the repair of cables                 2.10.13    Processing centers for punched and bent parts
        2.6.22     Coil / spool winding lines                        2.10.14    Punching and stamping machines
        2.6.23     Peripheral systems for cable production           2.10.15    Ring, hook and eye wire machines
        2.6.23.1   Cooling troughs                                   2.10.16    Hairclip and paperclip machines (office accessories)
        2.6.23.2   Cable cooling systems
                                                                     2.11       Machinery for the manufacture of fasteners
        2.6.23.3   Length measuring machines                       		           (bulk metal forming)
        2.6.24     Other cable manufacturing machines                2.11.1     One-stage presses
        2.7        Machinery for the manufacture of fibre optics     2.11.2     Multi-stage presses
        2.7.1      Drawing lines for fibre optics                    2.11.3     Wire nail presses
        2.7.2      Ink coating devices for fibre optics              2.11.4     Micro-forming machines
        2.7.3      Stranding machines for fibre optics               2.11.5     Thread rolling machines
        2.7.4      Spooling systems for fibre optics                 2.11.6     Profile rolling machines
        2.7.5      Stranding lines for fibre optics                  2.11.7     Thread cutting machines
        2.7.6      Lines for the assembly of fibre optics            2.11.8     Forging presses
        2.7.7      Machines for the marking of fibre optics          2.11.9     Other machines for bulk metal forming
        2.7.8      Fibre optic manufacturing machinery               2.11.9.1   Cold upsetting, forging
                                                                     2.11.10    Nail machines
        2.8        Machinery for the manufacture of wire ropes
        2.8.1      Stranding machines for wire ropes                2.12        Machinery for the manufacture of other wire
                                                                   		           products
        2.8.2      Stranding machines for steel cord
                                                                     2.12.1     Barbed wire machines
        2.8.3      Machines for the assembly of wire ropes
                                                                     2.12.2     Wire knitting machines
        2.8.4      Stranding
                                                                     2.12.3     Manufacturing machines for cut wire shot
                                                                     2.12.4     Manufacturing machines for other wire products

                                                                                                                                     page		5
GB

B    Product categories

                                                                                                                                     The International
                                                                                                                                     Wire and Cable
                                                                                                                                     Trade Fair in Russia
                                                                                                                                    8 – 10 June 2021
                                                                                                                                     Moscow, Russia

        2.12.5    Machines for transformer wire winding                           3.1.1.4    Turks head rolls
        2.12.6    Electrode manufacturing machines                                3.1.1.5    Plain rolls
        2.12.7    Lead wire and solder wire production plant                      3.1.1.6    Shape rolls
        2.12.8    Special-purpose machines (bag ties, belt fasteners,             3.1.2      Drawing tools
      		          drawing pins, clothes hangers, can openers, buckles,            3.1.2.1    Drawing capstans
      		          lead shot etc.)                                                 3.1.2.2    Wire pullers
                                                                                  3.1.2.3    Drawing dies with natural diamond (ND)
        2.13      Machinery for the heat treatment of bulk goods
      		          made from wire or strip                                         3.1.2.4    Drawing dies with polycrystalline diamond (PCD)

        2.13.1    Salt-bath furnaces                                              3.1.2.5    Hard metal dies

        2.13.2    Conveyor furnaces                                               3.1.2.6    Drawing tools made of ceramics
                                                                                  3.1.2.7    Enamelled drawing dies
        2.13.3    Chamber furnaces
                                                                                  3.1.2.8    Adjustable drawing dies
        2.13.4    Hardening and tempering lines
                                                                                  3.1.2.9    Tube and rod drawing dies
        2.13.5    Preheater
                                                                                  3.1.3      Machines for drawing die processing
        2.14      Machinery for the surface treatment of wire products           3.1.4       Tools for the manufacture of cables, fibre optics and
        2.14.1    Cleaning lines for wire products                             		            wire ropes
        2.14.2    Coating lines for wire products                                 3.1.4.1    Wire guidings, fiber guidings and cable guidings
        2.14.3    Shot blasting machines for springs                              3.1.4.2    Compacting tools
        2.14.4    Vibratory finishing machines for wire products                  3.1.4.3    Stranding dies
                                                                                  3.1.4.4    Bows for rotating machines
        2.15      Sorting machinery for wire products
                                                                                  3.1.4.5    Extrusion dies
        2.15.1    Sorting machines for springs
                                                                                  3.1.4.5.1 Extrusion heads
        2.15.2    Sorting machines for punched and bent parts
                                                                                  3.1.4.5.2 Other extrusion dies
        2.15.3    Sorting machines for fasteners
                                                                                  3.1.4.6    Cutting and crimping tools for cables
        2.15.4    Sorting machines for other wire products
                                                                                  3.1.4.7    Flat cores
        2.15.5    Machines for size reduction
                                                                                  3.1.4.8    Round cores
        2.16      Machinery for additive manufacturing (3D printing)             3.1.4.9     Tools for power transmission purposes (cones, rings,
                                                                               		            guide and bearing pulleys)
        2.17      Second-hand machines for the wire and cable industry
                                                                                  3.1.4.9.1 Steel/cast, chrome-plated
        2.18      Spare and wear parts for the wire and cable industry            3.1.4.9.2 Stainless steel
        2.18.1    Haul-off-belts for Caterpiller-machines                         3.1.4.9.3 Plastics
        2.18.2    Timing-belts                                                    3.1.4.9.4 Other materials
        2.18.3    Other spare and wear parts for the wire and cable industry      3.1.5      Tools for the manufacture of springs
                                                                                  3.1.5.1    Grinding wheels for spring end grinding machines
        2.19      Machinery for cable recycling
                                                                                  3.1.5.2    Ceramic tools for the manufacture of springs
        2.20      Machines for other types of material processing                 3.1.5.3    Other tools for the manufacture of springs
        2.20.1    Turning, milling, grinding, spinning                            3.1.6      Tools for the manufacture of fasteners
        2.20.2    Deburring, peeling, upsetting                                   3.1.6.1    Tools for thread rolling
        2.20.3    Grinding, pointing, lapping                                     3.1.6.2    Other rolling tools
                                                                                  3.1.6.3    Pressing tools
        2.21      Machines for tool manufacturing
                                                                                  3.1.6.4    Tools for forming technology
        2.21.1    Spark erosion
                                                                                  3.1.7      Other forming tools
        2.22      Plant engineering and construction                              3.1.7.1    Cold upsetting and stamping tools
                                                                                  3.1.7.2    Other materials
        3.        Tools and auxiliary materials and agents for the
      		          manufacture of drawn wire and the further processing of         3.1.8      Tools and devices for processing of rods, wires and
      		          wire products                                                		            wire products
                                                                                  3.1.8.1    Cutting devices
        3.1       Tools for wire production
                                                                                  3.1.8.2    Straightening devices
        3.1.1     Rolling tools
                                                                                  3.1.8.3    Bending devices
        3.1.1.1   Steel
                                                                                  3.1.9      Tools for casting
        3.1.1.2   Hard metal, hard-faced
        3.1.1.3   Ceramics, ceramic-coated                                        3.2        Agents for wire processing

                                                                                                                                                  page		6
GB

B    Product categories

                                                                                                                              The International
                                                                                                                              Wire and Cable
                                                                                                                              Trade Fair in Russia
                                                                                                                             8 – 10 June 2021
                                                                                                                              Moscow, Russia

        3.2.1     Pickling agents                                           3.5.1      Material Handling
        3.2.2     Cleaning agents
                                                                            3.6        Logistics for the wire and cable industry
        3.2.3     Drawing agents
                                                                           3.6.1       Machines for the counting, weighing and sorting of
        3.2.4     Lubricants                                             		            wire products
        3.2.5     Other chemicals                                           3.6.1.1    Separating systems
        3.2.6     Coating agents                                            3.6.2      Dosing machines
        3.2.7     Agents for chemical and galvanic coating                  3.6.3      Packing / packaging machines
        3.2.8     Grinding and lapping materials                            3.6.3.1    Counting and packaging machines
        3.2.9     Adhesives                                                 3.6.3.2    Collating machines
        3.3       Materials and agents for cable production                 3.6.3.3    Packaging (coil forming, storing)
        3.3.1     Insulating and sheathing materials for cables             3.6.4      Conveyor systems
        3.3.1.1   Polymers                                                  3.6.4.1    Small capacity lifting devices
        3.3.1.2   Flame-retardant, halogen-free polymers                    3.6.5      Warehouse systems, storage systems
        3.3.1.3   Elastomers                                                3.6.6      Packaging materials
        3.3.1.4   Silicones                                                 3.6.7      Coiling and decoiling systems
        3.3.1.5   Natural rubber                                            3.7        Marking and labelling systems
        3.3.1.6   Tapes made of paper, textile and non-woven materials
        3.3.1.7   Resins and varnishes for wire insulation                  3.8        Others

        3.3.1.8   Crosslinked polymers                                      3.9        Stock automation
        3.3.1.9   Insulating, separating and special tapes
                                                                            3.10       Auxiliaries (guides, feed devices, brakes etc.)
        3.3.2     Additives for insulating and sheathing materials
        3.3.2.1   Colorants                                                 4.         Wire and wire products
        3.3.2.2   Fillers
                                                                            4.1        Wire and bar material
        3.3.2.3   Flame-retardant substances
                                                                            4.1.1      Wire, related to its shape and dimension
        3.3.2.4   Other additives
                                                                            4.1.1.1    Wire rod
        3.3.2.5   Masterbatches
                                                                            4.1.1.2    Drawn or cold-rolled wire
        3.3.3     Yarns and foils for cables and ropes
                                                                            4.1.1.3    Round / rounded wire
        3.3.3.1   Reinforcing yarns and filler yarns for cables
                                                                            4.1.1.4    Fine wire
        3.3.3.2   Water swellable yarns for cables
                                                                            4.1.1.5    Superfine wire
        3.3.3.3   Yarns for steel wire ropes
                                                                            4.1.1.6    Ultra-fine wire
        3.3.3.4   Foils for cables
                                                                            4.1.1.7    Flat / flattened wire
        3.3.3.5   Non-woven tapes for cables
                                                                            4.1.1.8    Profile / profiled wire
        3.3.3.6   Other reinforcing elements for cables
                                                                            4.1.2      Wire, related to its material: Iron and steel
        3.3.3.7   Other anti-moisture systems
                                                                            4.1.2.1    Iron wire, bare
        3.3.3.8   Other wrapping materials
                                                                            4.1.2.2    Iron wire with metallic coating
        3.4       Handling systems for the wire and cable industry          4.1.2.3    Iron wire with non-metallic coating
        3.4.1     Headstocks                                                4.1.2.4    Steel wire, bare
        3.4.2     Spools                                                    4.1.2.5    Steel wire with metallic coating
        3.4.2.1   Steel spools                                              4.1.2.6    Steel wire with non-metallic coating
        3.4.2.2   Wooden spools                                             4.1.2.7    Low alloy steel wire
        3.4.2.3   Plastic spools                                            4.1.2.8    High alloy steel wire
        3.4.2.4   One-way spools                                            4.1.2.9    Stainless steel wire
        3.4.2.5   Bobbins for braiding machines                             4.1.2.10   Wire made of other steels
        3.4.2.6   Cable reels / drums                                       4.1.2.11   Low-carbon steel wire
        3.4.2.7   Other special coils, spools and reels                     4.1.2.12   High-carbon steel wire
        3.4.3     Barrels                                                   4.1.2.13   Annealed steel wire
        3.4.4     Cardboard containers and disposable containers            4.1.2.14   Tempered steel wire
        3.4.5     Other containers                                          4.1.2.15   Strain hardened steel wire
                                                                            4.1.2.16   Wire of special alloys
        3.5       Robot technology for the wire and cable industry
                                                                            4.1.2.17   Bare wire, rod and wire ropes
                                                                                                                                           page		7
GB

B    Product categories

                                                                                                                               The International
                                                                                                                               Wire and Cable
                                                                                                                               Trade Fair in Russia
                                                                                                                             8 – 10 June 2021
                                                                                                                               Moscow, Russia

         4.1.3      Wire, related to its material: Non-ferrous materials     4.1.4.29   Wire for sieves and filters
         4.1.3.1    Aluminium wire / aluminium alloy wire                    4.1.4.30   Bending wire
        4.1.3.2     Copper wire / copper alloy wire (such as brass wire or   4.1.4.31   Chain wire
      		            bronze wire)                                             4.1.4.32   Wire for use in the automotive and aircraft industries
         4.1.3.3    Magnesium wire                                           4.1.4.33   Auxiliary welding materials
         4.1.3.4    Nickel wire                                              4.1.5      Bar material
         4.1.3.5    German silver wire                                       4.1.5.1    Iron, steel and special steel bars
         4.1.3.6    Chromium-nickel wire                                     4.1.5.1.1 Low alloy steel
         4.1.3.7    Gold wire                                                4.1.5.1.2 Structural steel
         4.1.3.8    Platinum wire                                            4.1.5.1.3 Bright steel
         4.1.3.9    Silver wire                                              4.1.5.1.4 Hardening and tempering steel
         4.1.3.10   Lead wire                                                4.1.5.1.5 Tool steel
         4.1.3.11   Zinc wire                                                4.1.5.1.6 Machining steel
         4.1.3.12   Tin wire                                                 4.1.5.1.7 Ball bearing steel
         4.1.3.13   Titanium wire                                            4.1.5.1.8 Case-hardening steel
         4.1.3.14   Tungsten (wolfram) wire                                  4.1.5.1.9 Stainless steel
         4.1.3.15   Beryllium wire                                           4.1.5.1.10 Other Steels
         4.1.3.16   Molybdenum wire                                          4.1.5.2    Aluminium and aluminium alloy bars
         4.1.3.17   Niobium wire                                             4.1.5.3    Copper and copper alloy bars
         4.1.3.18   Tantalum wire                                            4.1.5.4    Other non-ferrous metals bars
         4.1.3.19   Zirconium wire
                                                                             4.2        Wire ropes
         4.1.3.20   Wire made of other metals and alloys
                                                                             4.2.1      Wire ropes made from stainless steel
         4.1.4      Wire, related to its application
                                                                             4.2.2      Wire ropes made from galvanized steel
         4.1.4.1    Reinforcing wire / armouring wire
                                                                             4.2.3      Customized wire ropes
         4.1.4.2    Cold-upsetting wire / cold heading wire
                                                                             4.2.4      Wire rope accessories
         4.1.4.3    Screw wire
                                                                             4.2.5      Rope cores
         4.1.4.4    Spring steel wire
         4.1.4.5    Spring wire made of non-ferrous metals                   4.3        Cables
         4.1.4.6    Rope wire                                                4.3.1      Conductor ropes
         4.1.4.7    Netting wire                                             4.3.2      Underwater cables
         4.1.4.8    Wire for architectural wire mesh                         4.3.3      Underground cables
         4.1.4.9    Brazing wire / soldering wire                            4.3.4      Extra-high voltage cables (EHV)
         4.1.4.10   Eroding wire                                             4.3.5      High voltage cables (HV)
         4.1.4.11   Metallizing wire                                         4.3.6      Medium voltage cables (MV)
         4.1.4.12   Carrying wire for fiber-optic cables                     4.3.7      Low voltage cables (LV)
         4.1.4.13   Enamelled wire / magnet wire / winding wire              4.3.8      Telecommunication cables
         4.1.4.14   Electronic wire                                          4.3.9      LAN cables
         4.1.4.15   Heating / heat conducting wire / resistance wire         4.3.10     Control cables
         4.1.4.16   Stitching wire                                           4.3.11     Computer cables
         4.1.4.17   Teabag wire                                              4.3.12     Flat cables
         4.1.4.18   Staple wire                                              4.3.13     Automotive cables
         4.1.4.19   Lightning protection wire                                4.3.14     Battery cables
         4.1.4.20   Tyre wire                                                4.3.15     Marine cables
         4.1.4.21   Welding wire / cored wire / filler rod                   4.3.16     Railway cables
         4.1.4.22   Wire for brushes                                         4.3.17     Photovoltaic cables
         4.1.4.23   Binding wire                                             4.3.18     Installation cables
         4.1.4.24   Florist’s wire                                           4.3.19     Fibre optic cables
         4.1.4.25   Barbed wire                                              4.3.20     Hybrid cables
         4.1.4.26   Wire for other purposes                                  4.3.21     Other special cables
         4.1.4.27   Braiding wire                                            4.3.22     Plastic and paper-insulated cables
         4.1.4.28   Grid wire                                                4.3.23     Continuously Transposed Cables (CTC)

                                                                                                                                            page		8
GB

B    Product categories

                                                                                                                           The International
                                                                                                                           Wire and Cable
                                                                                                                           Trade Fair in Russia
                                                                                                                           8 – 10 June 2021
                                                                                                                            Moscow, Russia

        4.4        Springs                                                4.4.4.7    Cleaned springs
        4.4.1      Metallic springs and spring elements                   4.4.4.8    Other treated springs
        4.4.1.1    Tension springs / helical extension springs            4.4.5      Packages for springs
        4.4.1.2    Compression springs / helical compression springs      4.4.5.1    Blister packages for springs
        4.4.1.3    Torsion springs / leg springs                          4.4.5.2    Cartons for springs
        4.4.1.4    Bending springs / strip springs / leaf springs         4.4.5.3    PE bags for springs
        4.4.1.5    Special shaped springs                                 4.4.5.4    Plastic hoses for springs
        4.4.1.6    Conical springs                                        4.4.5.5    Other packages for springs
        4.4.1.7    Roller- and mainsprings
                                                                          4.5        Punched and bent parts
        4.4.1.8    Annular springs
                                                                          4.5.1      Punched / stamped parts
        4.4.1.9    Spiral springs
                                                                          4.5.2      Bent parts (such as staples, paper clips, brackets)
        4.4.1.10   Torsion bar springs
                                                                          4.5.3      Hose clamps
        4.4.1.11   Disc springs
                                                                          4.5.4      Complete assemblies
        4.4.1.12   Spring rings (Belleville springs)
                                                                          4.5.5      Other punched and bent parts
        4.4.1.13   Spring washers
        4.4.1.14   Clamping washers                                       4.6        Fasteners
        4.4.1.15   Securing elements                                      4.6.1      Metallic screws
        4.4.1.16   Snap rings                                             4.6.1.1    Sheet metal screws
        4.4.1.17   Shaft rings                                            4.6.1.2    Wood screws
        4.4.1.18   Splints                                                4.6.1.3    Chipboard screws
        4.4.1.19   Micro springs                                          4.6.1.4    Lock screws
        4.4.1.20   Other spring components                                4.6.1.5    Anchor bolts
        4.4.1.21   Assemblies with other elements                         4.6.1.6    Suspension screws
        4.4.2      Non-metallic springs and spring elements               4.6.1.7    Self drilling screws
        4.4.2.1    Elastomer springs (rubber springs)                     4.6.1.8    Screws with conical shank
        4.4.2.2    Springs made of plastics                               4.6.1.9    Screws with cylindrical shank
        4.4.2.3    Springs made of fiber composite materials              4.6.1.10   Fine-thread screws
        4.4.2.4    Springs made of ceramics                               4.6.1.11   Flat-thread screws
        4.4.2.5    Fluid springs                                          4.6.1.12   Round-thread screws
        4.4.2.6    Air springs (gas spring)                               4.6.1.13   Screws with buttress thread
        4.4.2.7    Spring and securing elements                           4.6.1.14   Self drilling screws / thread cutting screws
        4.4.2.8    Other non-metallic spring elements                     4.6.1.15   Screws with sharp thread
        4.4.3      Starting materials for springs                         4.6.1.16   Screws with trapezoidal thread
        4.4.3.1    Rod material for springs                               4.6.1.17   Screws with other thread forms
        4.4.3.2    Round wire for springs                                 4.6.1.18   Mushroom head screws
        4.4.3.3    Flat wire for springs                                  4.6.1.19   Half-round head screws
        4.4.3.4    Profile wire for springs                               4.6.1.20   Truncated cone head screws
        4.4.3.5    Strip for springs                                      4.6.1.21   Round-head screws
        4.4.3.6    Spring steel                                           4.6.1.22   Raised countersunk-head screws
        4.4.3.7    Other steel types for springs                          4.6.1.23   Tapered head screws
        4.4.3.8    Copper and copper alloys for springs                   4.6.1.24   Screws with decorative head
        4.4.3.9    Aluminium and aluminium alloys for springs             4.6.1.25   Cylinder head screws
        4.4.3.10   Other metals and alloys for springs                    4.6.1.26   Screws with external hexagon drive / hex head screws
        4.4.3.11   Non-metallic materials for springs                   4.6.1.27     Screws with external square drive / square-head
        4.4.4      Springs, related to forming process and condition   		            screws
        4.4.4.1    Hot-formed springs                                     4.6.1.28   Screws with internal square drive
        4.4.4.2    Cold-formed springs                                   4.6.1.29    Screws with hexagon socket drive / hex socket head
                                                                       		            cap screws
        4.4.4.3    Heat-treated springs
                                                                          4.6.1.30   Screws with hexalobular drive
        4.4.4.4    Surface-treated springs
                                                                          4.6.1.31   Screws with internal serrated drive
        4.4.4.5    Coated springs
                                                                          4.6.1.32   Screws with I-star drive
        4.4.4.6    Greased springs

                                                                                                                                        page		9
GB

B    Product categories

                                                                                                                               The International
                                                                                                                               Wire and Cable
                                                                                                                               Trade Fair in Russia
                                                                                                                             8 – 10 June 2021
                                                                                                                               Moscow, Russia

       4.6.1.33     Screws with cruciform-style drive / cross recessed 		     4.6.7.6   Clinching systems
      		            screws
         4.6.1.34   Screws with longitudinal slot drive / slotted screws      4.7       Other wire products
         4.6.1.35   Screws with other drive types                             4.7.1     Round steel chains
         4.6.2      Further fasteners                                         4.7.2     Elements for link chains
         4.6.2.1    Threaded rods / thread rods                               4.7.3     Ball bearings
         4.6.2.2    Bolts                                                     5.        Testing technology, sensor technology and quality
         4.6.2.3    Pins                                                    		          assurance for the wire and cable industry
         4.6.2.4    Nails                                                     5.1       Materials testing
         4.6.2.5    Rivets                                                    5.1.1     Equipment for destructive materials testing
         4.6.2.6    Hooks                                                     5.1.2     Equipment for non-destructive materials testing
         4.6.2.7    Nuts                                                      5.1.3     Hardness testers
         4.6.2.8    Threaded inserts / thread inserts                         5.1.4     Vibration test equipment
         4.6.2.9    Washers (see also 4.4.1)
                                                                              5.2       Product testing
         4.6.2.10   Other elements
                                                                              5.2.1     Tension measuring equipment
         4.6.2.11   Assemblies with other elements
                                                                              5.2.2     Optical test systems for wire
         4.6.3      Non-metallic fasteners
                                                                              5.2.3     Diameter measuring devices
         4.6.3.1    Screws made from polymers
                                                                              5.2.4     Profile testers
         4.6.3.2    Nuts made from polymers
                                                                              5.2.5     Concentricity testers
         4.6.3.3    Safety elements made from polymers
                                                                              5.2.6     Ovality testers
         4.6.3.4    Other elements
                                                                              5.2.7     Geometry testers
         4.6.4      Starting materials for fasteners
                                                                              5.2.8     Eddy current test instruments
         4.6.4.1    Round wire for fasteners
                                                                              5.2.9     Ultrasonic test equipment
         4.6.4.2    Rod material for fasteners
                                                                              5.2.10    X-ray inspection equipment
         4.6.4.3    Cold heading steel / cold upsetting steel
                                                                              5.2.11    Temperature measuring equipment
         4.6.4.4    Other steels for fasteners
                                                                              5.2.12    Rope testing equipment
         4.6.4.5    Copper and copper alloys for fasteners
                                                                              5.2.13    Capacitance meters
         4.6.4.6    Aluminium and aluminium alloys for fasteners
                                                                              5.2.14    Spark testers
         4.6.4.7    Other metals and alloys for fasteners
                                                                              5.2.15    Analytical equipment
         4.6.4.8    Non-metallic materials for fasteners
                                                                              5.2.16    Spring force measuring instruments
        4.6.5       Finished products in relation to the manufacturing
                                                                              5.2.17    Optical testing systems for wire products
      		            (forming) process and the final condition
                                                                              5.2.18    Testing machines for springs
         4.6.5.1    Cold-formed screws
                                                                              5.2.19    Testing machines for punched and bent parts
         4.6.5.2    Hot-formed screws
                                                                              5.2.20    Testing machines for fasteners
         4.6.5.3    Machined screws
                                                                              5.2.21    Testing machines for other wire products
         4.6.5.4    Coated screws
                                                                              5.2.22    Empty bobbin detection systems
         4.6.5.5    Cleaned screws
                                                                              5.2.23    Test benches
         4.6.5.6    Surface-treated screws
                                                                              5.2.24    Laser measuring equipment
         4.6.5.7    Heat-treated screws
                                                                              5.2.25    Test equipment for optical fiber cables
         4.6.6      Packages for fasteners
                                                                              5.2.26    Other test equipment
         4.6.6.1    Blister packages for fasteners
                                                                              5.2.27    Test equipment for auxiliary materials
         4.6.6.2    Cartons for fasteners
                                                                              5.2.28    Laboratory test equipment
         4.6.6.3    PE bags for fasteners
                                                                              5.2.29    Other testing systems for wire products
         4.6.6.4    Plastic hoses for fasteners
         4.6.6.5    Other packages for fasteners                              5.3       Sensor technology
         4.6.7      Tightening / screwdriving and stapling tools              5.3.1     Sensors for wire and cable machinery
         4.6.7.1    Manually operated tightening tools                        5.3.2     Sensor evaluation systems (see also 7.1)
         4.6.7.2    Electrically driven tightening tools                      5.3.3     Drive and control technology
         4.6.7.3    Automatically operating tightening tools                  5.3.4     Torsion control equipment
         4.6.7.4    Stapling and nailing and tools
                                                                              5.4       Process monitoring systems
         4.6.7.5    Riveting machines

                                                                                                                                            page		10
GB

B    Product categories

                                                                      The International
                                                                      Wire and Cable
                                                                      Trade Fair in Russia
                                                                      8 – 10 June 2021
                                                                       Moscow, Russia

       5.5      Quality assurance systems (incl. factory data
      		        acquisition)

        6.      Environmental technologies and resource
      		        efficiency for the wire and cable industry

        6.1     Cooling and cleaning systems for drawing agents

        6.2     Filtration systems and filters for drawing machines

        6.3     Water treatment plants

        6.4     Air exhaust systems

        6.5     Storage systems for chemicals

        6.6     Processing systems for chemicals

        6.7     Recycling systems for chemicals

        6.8     Disposal systems for chemicals

        7       Software and various services for the wire and
      		        cable industry

        7.1     Software
        7.1.1   Software for the design of springs
        7.1.2   Software for the design of fasteners
        7.1.3   Software for the design of cables
        7.1.4   Software for the design of other wire products
        7.1.5   Simulation systems
        7.1.6   Production Data Acquisition (PDA) systems
        7.1.7   Enterprise Resource Planning (ERP) systems
        7.1.8   Manufacturing Execution Systems (MES)

        7.2     Services
        7.2.1   Reconditioning services for drawing dies
        7.2.2   Technical consulting
        7.2.3   Industry 4.0: Consulting and solutions
        7.2.4   Market, technology and competition monitoring
        7.2.5   Patent information
        7.2.6   Testing laboratories
        7.2.7   Certifications
        7.2.8   Others
        7.2.9   Galvanotechnical consulting

        7.3     Education and training

        7.4     Research and teaching

        7.5     Wholesale

        7.6     Specialist literature / publishing houses

        7.7     Associations

                                                                                   page		11
GB

     C
                                                    The International
                                                    Wire and Cable
                                                    Trade Fair in Russia
                                                    8 – 10 June 2021
                                                     Moscow, Russia

     Conditions of Participation
      1   Title of event
      2   Organizer
      3   Venue
      4   Dates
      5   Deadline for Registration
      6   Catalogue Entry
      7   Participation fees
      8   Application
      9   Admission
     10 Terms of Payment
     11 Withdrawal or Non-Participation
     12 Operation of exhibition stands
     13 Co-Exhibitors and group stands
     14 Exhibits
     15 Technical Guidelines
     16 Fair Insurance and Exclusion of Liability
     17 Circulars
     18 Reservations
     19 Final Provisions
     20 Salvatorian clause

                                                                 page		12
1                                                                            7.1.2 Premium Package:
    Title of event                                                           (Minimum Stand space: 18 sqm)                       EUR 440,–/sqm
    wire RUSSIA 2021                                                         (with surface price)
    The International Wire and Cable Trade Fair in Russia                    Premium equipment for shell scheme model, 18 sqm stand space
                                                                             Stand construction and dismantling, incl. all ancillary costs,
2   Organizer                                                                comprising:
    Messe Düsseldorf GmbH                                                    • High-quality, hard-wearing carpeting in colour of your choice
    Postfach 10 10 06, 40001 Düsseldorf                                      • Octanorm Maxima lightweight system stand construction,
    Messeplatz, 40474 Düsseldorf                                               including sturdy cabin, rear and side walls
    Germany                                                                  • Lockable cabin, 1 x 2 m
    Phone:        +49 211 45 60 – 01                                         • Signet board with lettering of your choice
    Fax:          +49 211 45 60 – 668                                          (two signet boards on corner stands)
    www.messe-duesseldorf.de                                                 • Furniture comprising 4 chairs, one table and one sideboard
                                                                               (equipment may vary from illustration)
                                                                             • 1 Waste paper basket
3   Venue                                                                    • 1 coat rack
    Moscow – Fairground EXPOCENTRE Fairgrounds in Krasnaya Presnya           • Power connection (220 V/1 KW)
                                                                             • 1 HQI spot per 4 sqm stand area, incl. power consumption
4                                                                            		 and electric supply
    Dates
    Construction: 5 – 7 June 2021                                            For additional lighting, outlets etc. it is necessary to order a
    Duration:        8 – 10 June 2021                                        separate electric main connection.
    Dismantling: 11 June 2021                                                Resignation or modifications of a already booked basic or premium
    The exhibition will be opened on Tuesday, 8 June 2021.                   package are just valid up to six weeks before beginning of the
    Opening times: 8 – 9 June 2021           9.00 a.m. – 6.00 p.m.           exhibition. Afterwards, an arrangement fee has to be paid.
                     10 June 2021            9.00 a.m. – 4.00 p.m.
                                                                             7.1.3 Price for Row stand: space only             EUR 355,–/sqm
                                                                                     1 side open (Minimum stand space: 20 sqm)
5   Deadline for Registration                                                7.1.4 Two-storey stands: 50% surcharge on
    27 January 2021                                                                  raw-space price per sqm (for the fitted area)
                                                                             7.1.5 Registration fee			                          EUR 600,–
6   Catalogue Entry                                                           7.2 A management fee is due and payable to the site
    6.1 Registration fee                                                            management EXPOCENTRE Fairgrounds for stands without
    A one-off registration fee of EUR 600 is due and payable upon                   stand fitting.
    submission of application. The exhibitor shall be billed for such        7.3 Stand construction approval/procedure
    amounts. The registration fee includes an basic entry in the             The fees for the stand construction approval/procedure by the
    official trade fair media, consisting of exhibitor’s name (in Latin      fairground owners/organisers can be found in the technical
    and cyrillic) full address, contact data (phone, fax, email and          guidelines (see also point 14).
    internet) and an entry under the main area of presentation in the
                                                                             7.4 General services and facilities
    index of products (print and online).
                                                                             – Provision of net fair space (stand area) during the official
    6.2 Catalogue Entry                                                        opening hours
    The exhibitor is forwarded separate forms in due course for              – Pro rata charge for collectively used area (difference b­ etween
    catalogue entries in addition to the 6.1 entry.                             gross and net area)
    These provisions (6.1 and 6.2) also apply to co-exhibitors.              – Stand number
    6.2.1 The catalogue is issued by Messe Düsseldorf. Exhibitors will       – Cleaning of aisles and passages in halls (exhibitors are
    receive in due time either from Messe Düsseldorf or an appointed           ­responsible for cleaning stands)
    third party full details on catalogue entries and placing of             – General security (no individual surveillance)
    advertisements.                                                          – Fire protection service during assembly, event and d­ ismantling
    No claims can be entertained for incorrect, incomplete or omitted        – Carpet in the aisles
    entries.                                                                 – General illumination
                                                                             – Design of open-air space and halls (flags, inscriptions)
                                                                             – Equipping and operating a MD service centre (telephone and
7   Participation fees                                                         telefax exchange, technical facilities office and organiser‘s
    The costs of participation to be paid are as set forth in the partici-     office)
    pation options described under 7.1–7.3 below.                            – Comprehensive visitor canvassing
                                                                             – Mandatory liability insurance by local organisers
    7.1 Stand space inside exhibition hall incl. standfitting                Any waiver of individual company-specific or general services shall
                                                                             constitute no claim to reduction of the participation fee.
    7.1.1 Package price:                                                     All fees are net, without value added tax, which may have to be
    (Minimum Stand space: 12 sqm)                      EUR 380,–/sqm         paid separately. Any additional technical services required, e.g.
    (with surface price)                                                     power, security elements, water, local labour etc., are provided
    Basic equipment for shell scheme model                                   exclusively by Messe Düsseldorf at an extra charge and can be
    Stand construction and dismantling, incl. all ancillary costs,           ordered using special order forms.
    comprising:                                                              Fees for additional stand assembly services supplementary to those
    • Covering the entire floor area of the booth with grey neddle          included in the participation fee, and any orders for services shall
      punch carpet                                                           be agreed on or charged according to Messe Düsseldorf ‘s price lists
    • Stand partition walls to the neighbouring boothes, 250 cm high,       valid at the time of the event.
      Octanorm system, white                                                 Exhibitors shall pay additional rental fees for use of such areas
    • 1 fascia with lettering (without logo)at the aisle, held by           outside official opening hours
      aluminium modular system top edge of booth, 33 cm high, white
                                                                             7.5    Taxation
    • 1 table 70 x 70 cm
    • 2 chairs                                                              The participation fees, in accordance with article 7 of the contract,
    • 1 socket, 1 KW                                                        are to be understood as net prices, plus any value added tax and/
    • 1 spotlight (100 W), per 6 sqm of booth area, incl. power             or usage, or rather, service provision tax required by law. If such
      consumption and electric supply.                                       taxes are triggered by the services, then they are due in addition
    • 1 Waste paper basket                                                   to the agreed price.
    For additional lighting, outlets etc. it is necessary to order a
    separate electric main connection.
    Resignation or modifications of a already booked basic or premium
    package are just valid up to six weeks before beginning of the
    exhibition. Afterwards, an arrangement fee has to be paid.

                                                                                                                                             page		13
The customer will effect all payments due hereunder without                    the part of Messe Düsseldorf the space allocated is no longer
    withholding of, deduction for or on account of any present or                  available, the exhibitor shall be entitled to a refund of the
    future taxes, duties, assessments or governmental charges of                   participation fee. No claims for damages may be submitted.
    whatever nature imposed or levied by any governmental authority                Following admission by Messe Düsseldorf (conclusion of the
    in connection with this Agreement. If the customer becomes                     contract), the obligation to pay the participation fee shall remain
    obligated by law to make such withholding or deduction at source,              legally binding even if, for example, the authorities in the
    the customer will pay to the Messe Düsseldorf GmbH such                        exhibiting country do not approve, in whole or in part, the
    additional amounts as may be necessary to enable the Messe                     exhibitor’s import requirements, or if exhibits fail to arrive in time
    Düsseldorf GmbH to receive on the due date a net amount equal to               or to arrive at all (e.g. owing to loss, delays in transit or customs),
    the full amount which it would have received the payment had not               or if the exhibitor or his agent is delayed or even unable to attend.
    been subject to the Taxes. The customer shall promptly pay all of              Should the exhibitor or his agent fail to take over the allocated
    the Taxes, deductions and withholdings and shall not later than                stand area two days prior to the beginning of the event, such area
    eight Business Days after receiving the same, furnish the Messe                may be otherwise disposed of. This shall not release the exhibitor
    Düsseldorf GmbH with such certificates, receipts or other                      from his contractual obligations or entitle him to a demand refund
    documents confirming receipt by the competent authority of such                or lodge any other claims.
    payments.

    7.5.1 invoice revision                                                    10   T erms of Payment
    We charge a fee of EUR 50.– for each invoice revision                           10.1 Participation costs set forth in Item 7 shall become due upon
    requested by you.                                                               approval of the admission. The exhibitor shall be billed for
                                                                                    this account

8                                                                                  10.2 Bills for other, separately ordered services or deliveries shall
     Application                                                                   be payable at the time of performance or on the date of the bill at
    Applications must be submitted using the enclosed form,                        the latest.
    ack­now­ledg­ing these Conditions of Participation. The completed
    ­application form ­bearing a legally binding signature should be               10.3 From 1 January 2006, a European Payments Council
     mailed to:                                                                    resolution requires all European banks to process all cross-border
     Messe Düsseldorf GmbH                                                         euro payments, received within the European Union and the
     U1 – P14                                                                      European Economic Area (EEA), with mandatory BIC (Bank
     P.O. Box 10 10 06                                                             Identifier Code - colloquially known as the SWIFT code) and IBAN
    40001 Düsseldorf                                                               (International Bank Account Number) information. Remittances
    Germany                                                                        quoting the name of the event, customer’s and bill numbers, are
    No account shall be taken of conditions or provisos contained in               payable into any of the following accounts of Messe Düsseldorf,
    applications. Requests for specific sites do not constitute a condition        Düsseldorf:
    of participation.                                                              Deutsche Bank AG Düsseldorf
    The application shall be binding irrespective of admission by                  BLZ:         300 700 10
    Messe Düsseldorf.                                                              Konto-No:    1641 414 00
    Only upon receipt by Messe Düsseldorf shall the application be                 Swift-Code: DEUTDEDD
    deemed to have been submitted; it shall be binding pending final               IBAN:        DE66 30070010 0164141400
    admission or non-admission. Particulars given shall be stored for              BIC-Code:    DEUTDEDDXXX
    automatic data processing and shall be made available to third                 Commerzbank AG Düsseldorf
    parties upon implementation of the contract. Applications shall be             BLZ: 300 800 00
    processed in the order received. Any applications received after               Konto-No:    211 279 600
    the registration deadline can only be considered if sufficient                 Swift-Code: DRESDEFF300
    space is available. Any services offered by companies having                   IBAN:        DE05 30080000 0211279600
    exclusive rights in the fair grounds must be ordered through Messe             BIC-Code:    DRESDEFF300
    Düsseldorf.                                                                    Stadt-Sparkasse Düsseldorf
                                                                                   BLZ: 300 501 10
9   Admission                                                                     Konto-No:    10 117 950
     In principle, only those exhibitors are admitted whose product                Swift-Code: DUSSDEDD
     range is covered by the title and remit of the event. There is no             IBAN:        DE94 30050110 0010117950
     legal right to admission.                                                     BIC-Code:    DUSSDEDDXXX
     Messe Düsseldorf decides on the admission of exhibitors and                   10.4 For all outstanding liabilities Messe Düsseldorf may retain
     exhibits. Any firm which has failed to meet its financial                     the stand equipment and products of the relevant exhibitor as
     obligations as against Messe Düsseldorf (from previous fair                   security.
     participations and/or under the terms of these Conditions of                  Sec. 562a, sent. 2 of Germany’s Civil Code (BGB) shall not apply.
     Participation, Item 10) may be rejected.                                      Messe Düsseldorf shall not be liable for damage to and/or loss of
     Exhibitors will be informed of admission in writing and admission             goods to which a lien attaches.
     shall apply only to the exhibitor stated therein. Exhibitors will
     receive written confirmation surface mail or electronically that              10.5 If invoices are sent to a third party on the exhibitor’s
     they have been admitted with their products.                                  instructions, the latter shall still remain debtor.
     Notification of admission, whether by surface mail or electronically,         10.6 In case of default, interest shall be charged at a rate 8%
     constitutes the conclusion of the contract between Messe                      above the current base rate according to Sec. 247 of Germany’s
     Düsseldorf GmbH and the exhibitor. The electronic transmission                Civil Code (BGB). Where payment dates are not met, Messe
     has been made, as soon as the confirmation of admission has                   Düsseldorf shall be entitled to rescind the contract or otherwise
     become accessible to the exhibitor. The exhibitor must ensure                 dispose of the stand area. Item 11 of the Conditions of
     that its inbox is checked at regular intervals and that the technical         Participation shall apply.
     requirements for the receipt of e-mails are available. If the
     exhibitor’s relevant e-mail address changes, then Messe                  11    ithdrawal or Non-Participation
                                                                                   W
     Düsseldorf must be notified immediately. If Messe Düsseldorf                  The exhibitor is entitled to withdraw his application prior to
     suffers loss or damage due to faulty or missing technical                     admission. Should an exhibitor withdraw his application after the
     requirements and/or due to the exhibitor’s failure to notify Messe            date of deadline for registration but prior to admission, he shall
     Düsseldorf of a new email address, then the exhibitor shall be                forfeit any a­ dvance payment made.
     liable to Messe Düsseldorf for compensation.                                  Following admission, the exhibitor is no longer entitled to
     The exhibitor will be given a floor plan showing the position of its          withdraw his application or reduce the exhibition space. Both the
     stand. If appropriate, a site map of the exhibition centre or a hall          participation fee and any other costs actually incurred must be
     plan will be sent via e-mail additionally.                                    paid. Where the exhibitor fails to occupy the stand area allocated
                                                                                   to him and where such area can be otherwise rented by Messe
    Messe Düsseldorf reserves the right to cancel a stand booking                  Düsseldorf (except by way of ex­change), the exhibitor shall pay
    approved on the basis of misleading or false information or if the             40% of the participation fee as well as any other costs actually
    requirements for participation are no longer met or the booking is             incurred. The exhibitor reserves the right to furnish evidence that
    no longer in accordance with the admission regulations.                        the costs demanded of him are excessive.
    Should Messe Düsseldorf be compelled to relocate or change                     Withdrawal by the exhibitor or any waiver of the allocated stand
    individual stands, entrances, exits or aisles at a later point in              area shall only become effective upon receipt by Messe Düsseldorf
    time, this shall not give rise to any claims. If through no fault on           of a written declaration to that effect.

                                                                                                                                                     page		14
Messe Düsseldorf is entitled to rescind the contract in the event            all right to asserting any claims for damages which would have
     of an application for insolvency proceedings in respect of the               been covered, had they taken out the insurance protection offered.
     exhibitor’s assets or where such an application is rejected on the           All damages incurred must be reported in writing to the police and
     grounds of insufficient assets. The exhibitor shall inform Messe             to the insurance broker (also by telex or telefax). Incidences of
     Düsseldorf thereof at once.                                                  fire, theft and burglary must be reported to the trade fair
                                                                                  management and the police within 24 hours. Messe Düsseldorf is
12                                                                                liable for financial losses and damage to property or assets only in
     Operation of exhibition stands                                               the case of wilful intent or gross negligence.
     During the exhibition opening hours the stand must be manned by              Messe Düssedorf accepts no duty to excercise proper care with
     a sufficient number of staff and should be accessible to visitors.           respect to exhibits and/or stand fittings. This exclusion is in no
     Exhibitors have no right of access to other stands outside the               way limited by the security measures provided or decoration
     official opening hours, unless permission has been obtained from             services undertaken in individual cases.
     the stand exhibitors. Exhibition stands must be operated in                  The exhibitor is liable for all damages caused to third parties as
     accordance with the legal conditions and administrative guidelines.          a result of his exhibiton participation, including damage to
                                                                                  buildings on the fairgrounds and to the exhibition halls and/or
13   C o-exhibitors and group stands                                             their furniture and fittings, save where such damages are covered
      Without the prior consent of Messe Düsseldorf, exhibitors are not           by a local third-party indemnity insurance.
      permitted to give their allotted stand either fully or in part to a
      third party, whether for payment or free of charge. Products or        17   C irculars
      companies other than those specified on the admission slip cannot            Once the stand areas have been allocated, the exhibitors receive
      be advertised on the stand.                                                  circulars giving information on preparations for and the staging
      Permission to accept co-exhibitors will be given only upon                   of the fair. Any consequences arising from disregarding these
      application in writing by the exhibitor to Messe Düsseldorf. The             circulars shall be borne by the exhibitor.
      co-exhibitor is liable to the same conditions as the main exhibitor.
      The co-exhibitor is required to pay the registration fee to Messe
      Düsseldorf. The main exhibitor will, however, always be liable for     18    eservations
                                                                                  R
      the payment of the co-exhibitor’s fee/Registration fee. If a                 Any rules and regulations of the host country or of the local
      co-exhibitor is admitted without the consent of Messe Düsseldorf,            contractual partner differing from these Conditions of Participation
      Messe Düsseldorf will have the right to cancel the contract with             or imposing additional restrictions shall have precedence at all
      the main exhibitor without further notice and to clear the stand at          times. Messe Düsseldorf shall not be liable for any resulting losses
      the exhibitor’s cost. The exhibitor waives the rights of unwarranted         or other disadvantages for the exhibitor.
      interference. The exhibitor will have no right to claim damages.             Messe Düsseldorf shall be entitled to postpone, curtail, extend or
      Co-exhibitors are all exhibitors who are represented on a stand              cancel the event and to close individual or all sections of the fair
      with their own staff and own exhibits alongside the main                     either temporarily or permanently where unforeseen circumstances
      exhibitor. Companies with close economic or organisational ties              so dictate. Should it become necessary to postpone, curtail,
      are also classified as co-exhibitors. Company representatives will           extend or cancel the event, the exhibitor shall not be entitled to
      not be admitted as co-exhibitors. Additionally represented                   withdraw from the contract or to claim compensation; should he
      companies are classified as those whose exhibits are shown by                nevertheless waive his right to the stand area allocated to him,
      the exhibitor.                                                               Item 11 of these Conditions of Participation shall apply. Messe
      Manufacturers of such equipment, machinery or other products                 Düsseldorf shall not be liable for any losses sustained or
      which are necessary for the demonstration of an exhibitor’s                  disadvantages suffered by the exhibitor as a result of a
      products are not regarded as co-exhibitors or as additionally                cancellation. Rather, the exhibitor shall in such case be required
      represented companies. In accordance with the admissions                     to bear a reasonable share of the costs incurred by Messe
      regulations co-exhibitors can be entered into the catalogue with             Düsseldorf in preparing for the event.
      their full address provided all fees have been paid and the                  Where the exhibitor has placed orders with Messe Düsseldorf for
      necessary documents have been received by the specified deadline.            services supplementary to those covered by the participation fee
      Messe Düsseldorf can authorise group stands provided they are in             (Item 7), he shall be billed for the contributions incurred until this
      keeping with the overall pattern of the event. Exhibitors on group           point in time.
      stands are subject to all regulations. If a stand is allocated to
      two or more companies, each company will be jointly and                19
      severally liable to Messe Düsseldorf. Companies on a joint stand            Final Provisions
      should nominate a common representative on the application                   All agreements, individual approvals and special regulations require
      form.                                                                        written confirmation by the trade fair company. Whereever
                                                                                   admission documents contain the reference that they haven been
                                                                                   drawn up by Messe Düsseldorf GmbH by computer, even if they
14   Exhibits                                                                     contain no signature, they are legally binding. If the exhibitor is
      All exhibits must be listed individually on the application form             already registered with Messe Düsseldorf for the relevant event and
      giving an exact description. Any display of inflammable or pungent           if he/she has his/her own signature, orders/offers are also valid
      exhibits or exhibits whose demonstration entails noise requires the          if they are received by Messe Düsseldorf electronically using this
      prior written consent of Messe Düsseldorf.                                   procedure.
      Exhibits may not be removed during the course of the event. The              All claims by exhibitors against Messe Düsseldorf – with the
      operation and demonstration of exhibits is only admissible within            exception of liability with intent – must be made within 6 months.
      the scope of legal requirements and accepted standards. Messe                Claims made thereafter are invalid. The period of limitation starts
      Düsseldorf is neither in charge of nor responsible for questions             at the end of the month in which the event finished.
      of legal requirements and licenses, quotas or transfers of sales             The place of performance and jurisdiction for all mutual obligations
      proceeds.                                                                    is Düsseldorf or, at the request of Messe Düsseldorf, the jurisdiction
                                                                                   of the exhibitor’s place of business. This also applies to complaints
15                                                                                 arising from cheques or drafts. If the exhibitor loses the case, he/
     Technical Guidelines                                                         she bears the costs of the legal proceedings as well as the costs of
      The Technical Guidelines are a constituent part of these Conditions          any legal representation.
      of Participation and must be adhered to. The Technical Guidelines            If the ineffectiveness of any provision is due to the extent of
      shall be handed over to the exhibitor at the latest with the order           service or period (deadline or date), stated therein, it shall be
      form for services.                                                           replaced by the legally permitted scope which comes closest to the
                                                                                   provision.
16   F air Insurance and Exclusion of Liability
      Messe Düsseldorf has concluded a general exhibiton insurance
      contract covering the usual insurable risks such as fire, burglary,
      theft, breakage, leakage and water damage, including the risks
      of transportation to and from the fairgrounds. On application
      each exhibitor can have his participation risk covered at his own
      expense under this general i­nsurance contract. On request a
      corresponding form will be sent to the exhibitor under separate
      cover together with the service package offer.
      Exhibitors who do not avail themselves of the insurance cover
      offered by this general insurance contract or do not do so in time
      acknowledge in respect of the exhibiton company that they waive

                                                                                                                                                    page		15
20   Salvatorian clause
     In the event of any provision of this contract being or becoming
     wholly or partially ineffective, or should a loophole transpire in
     this contract, such circumstances shall not affect the validity of
     the remaining contract. Instead of the ineffective provision and in
     order to close the loopholes, an appropriate provision shall apply,
     which in as far as legally possible, most closely approximates the
     objective which was, or would have been intended by the parties
     to the contract according to the sense and purpose of the contract,
     based on their consideration of the provision.
     If the ineffectiveness of any provision is due to the extent of
     service or period (deadline or date), stated therein, it shall be
     replaced by the legally permitted scope which comes closest to
     the provision.

     The law of the Federal Republic of Germany is applicable.
     The German text is binding.

     Messe Düsseldorf GmbH			                        10 September 2020

                                                                           page		16
You can also read