DRY SYSTEM SOLUTIONS AND DECOUPLING - Suitable for floors, walls and ceilings in new build and retrofit
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
SOUND INSULATION UNDERFLOOR HEATING DRY SCREED
DRY SYSTEM SOLUTIONS
AND DECOUPLING
Suitable for floors, walls and ceilings
in new build and retrofit
Content
PhoneStar Sound insulation boards 4-7
PhoneStar 25 Floor weight improvement board 8-9
Floor Systems PhoneStar Fire protection 10-11
PhoneStar Technical data 12-13
Floor / ceiling / wall systems
PhoneStar Technical data 14-15
closed wooden beam / solid wood ceilings
PhoneStrip Decoupling strips 16-17
PhoneStrip Test results 18-19
Wolf Bavaria GmbH - has been a successful, innovative and expand- PhoneStrip Technical data 20-21
ing company in the international dry construction industry since Practical report decoupling with PhoneStrip 22-23
2004. As experts, we advise and support hundreds of construction
PowerFloor Basics for Underfloor Heating 24-25
projects worldwide for a wide variety of customer groups. We offer
simple and effective solutions for sound insulation, underfloor heating PowerFloor Product line / packages 26-27
and dry screed flooring. In 2019 we introduced products to sound in- Wolf Cell Height compensation board 28-29
sulate the junctions between load-bearing components. Our products
Wolf Accessories 30-31
are optimized for retrofit and new build.
System solutions 32-33
Measurement technology 34
Research & Development 35
2 3
PhoneStar - Sound insulation
Why sound insulation is so important
Sleep and the 5 senses Hearing Our solution against noise
(auditory perception)
SAND WOOD
Sight
(visual perception) PhoneStar is approved as a sound in-
sulation panel for use on floors, walls,
ceilings and sloping ceilings in ETA
Smell
20/0371.
(olfactory perception)
At the same time, PhoneStar is certi-
Taste fied as a sound-absorbing dry screed.
Touching (tactile perception) (gustatory perception) 12
00
+ Reduces airborne and impact sound m
m
+ Made from natural materials - sand /1
25
and cardboard 0
m m
m m
25
/6
The ear never sleeps ... mm
because it is a very sensitive organ Excessive noise is proven to be harm- PhoneStar from Wolf Bavaria can
environmentally friendly effective 80
0
that even notices the slightest noi- ful to human health and affects us provide very effective protection
se during sleep. How else would you in terms of school, home and work against these noise disturbances.
hear the alarm clock? routine. It can lead to insomnia,
20
This is why even more environ- cause cardiovascular or psychophy- ETA N° 20/0371
mental agencies and government siological impairments, reduce per-
institutions are now dealing with the formance and cause irritability or
PhoneStar can be doubled up
prevailing noise problem. behavioural changes in social inter-
to achieve even better Sound
action. (WHO, 2017)
Insulation results.
Sound kinetic
energy energy
This is how PhoneStar works
Acoustic insulation measure (in dB) The pain threshold is at 120 dB
The results on the graph
Longitudinal 80 PhoneStar Plus Tri Rw= 42 dB
clearly show the out- Test report no.: E140124/1a_rev00
Sound sound wave transmission Music
wave standing airborne sound PhoneStar Tri Rw= 38 dB
Longitudinal sound waves affect flanking noise
before insulating attributes of the Language Test report no.: E170606/1a_rev00
transmission. PhoneStar has a high internal damping 60
PhoneStar boards. They PhoneStar ST Tri Rw= 36 dB
capacity due to the heavy, but soft, sand filling. The Test report no.: E170606/2a_rev00
substantially reduce sound
principle is similar to striking sand with a hammer.
in the low frequency range, 40
PhoneStar Microscopic There is no sound wave created, therefore no
vibrations rising up to 40 - 45 dB in
longitudinal sound waves and no flanking conditions. Typical coincidence dip of ho-
the typical human hearing
mogenous building materials
PhoneStar 3 in 1 range. Additionally, the 20 Auditory threshold
Sound The multilayer structure and irregular shaped casing, coincidence dip does not
wave the soft loose sand filling and the high mass of the affect PhoneStar in the way
after PhoneStar board all contribute to substantially that it does with homoge- 0
8000
4000
5000
2000
2500
nous building materials.
1000
1600
1250
3125
800
400
500
200
reducing the energy in the sound wave.
250
630
100
160
125
315
65
32
4 Mass Multilayer structureeffect Bending flexibility Frequency (in Hz)
5
PhoneStar - Sound insulation
Delivery program and certification
Easy installation PhoneStar PREMIUM-Line for best possible improvement
Weight Thickness Length x Width Quantity
Product illustration Item number
[kg/m2] [mm] [mm] [per pallet]
31.25 m2
CUTTING PhoneStar Plus Tri 29 15 1015 1250 x 625
40 boards
Quick & easy, e.g. with a utility knife
or a hand-held circular saw.
TAPING PhoneStar PROFESSIONAL-Line for increased improvement
Tape cut edges with Wolf Tape. Product illustration
Weight Thickness
Item number
Length x Width Quantity
[kg/m2] [mm] [mm] [per pallet]
INSTALLATION FLOOR FINISHES 53.76 m2
1010 1200 x 800
The PhoneStar boards are laid in a Any type of final floor covering can 56 boards
PhoneStar Tri 18 15
brickwork formation either floating be installed over PhoneStar boards 54.69 m2
1008 1250 x 625
or glued onto floors, depending on with appropriate preparation. 70 boards
the final floor covering. 81.60 m2
WALL AND CEILING SURFACES 1009 1200 x 800
PhoneStar boards are installed 85 boards
Any type of final floor covering can PhoneStar Twin 12 10
either directly or preferably on to a 82.03 m2
be installed over PhoneStar boards 1012 1250 x 625
sub-structure, on walls or ceilings. 105 boards
with appropriate preparation.
PhoneStar STANDARD-Line for minimum improvement
DRILLING SOCKET HOLES
Weight Thickness Length x Width Quantity
Holes can be drilled easily. To Product illustration Item number
[kg/m2] [mm] [mm] [per pallet]
prevent a slight trickle, seal with
54.72 m2
acrylic. 1017 1200 x 800
57 boards
PhoneStar ST Tri 17.5 12.5
54.68 m2
1019 1250 x 625
70 boards
See current installation
instructions on:
83.52 m2
www.wolf-bavaria.com/ PhoneStar ST Twin 11.5 9 1018 1200 x 800
87 boards
downloadcenter/
Floor weight improvement board
PhoneStar boards are Product illustration
Weight Thickness
Item number
Length x Width Quantity
[kg/m2] [mm] [mm] [per pallet]
installed to timber or metal
stud wall using
the appropriate drywall 26.88 m2
PhoneStar 25 39 25 1011 800 x 600
56 boards
screws.
PhoneStar boards are in- CERTIFICATION
stalled to the wall on Wolf The complete PhoneStar product range is listed in the
TPS 25, Battens or with ETA-20/0371 with all superstructures/constructions for
20
Wolf wall plug fixings. ETA N° 20/0371 application in the areas of floors, walls, ceilings and sloping roofs.
6 7
PhoneStar - Floor weight improvement board
Floor weight improvement made easy
PhoneStar 25 - The Floor weight
improvement board
PhoneStar 25
PhoneStar 25 - The 25 mm thick The risk of moisture penetration + For all kinds of Concrete floors and Timber floors
weight improvement board in a into bound fillings through the + Ecological raw materials wood and sand
handy 800 x 600 mm format. formwork of the ceiling is eliminated
+ Replaces fillings (grit, etc.)
Designed and developed for the when using PhoneStar 25.
+ Easy to apply ceiling filling finish
replacement of fillings on mass PhoneStar 25 is preprepared for the
timber and wooden beam floors. + Easy to install - a particularly handy format
installation on mass timber floors
Addressing complaints, such as and open and closed wooden beam + Flat board material - no leveling of fillings required
fillings, is greatly simplified. Since floors for new build and retrofit. + Can be laid floating or glued
PhoneStar 25 is a board, the PhoneStar 25 improves the impact + No waiting times - immediately walkable and resilient
laborious transport of bagged sound on mass timber floors + Supply lines can be laid on PhoneStar 25 in order to
goods or bulk goods is no longer by approx. 6 dB. On a wooden prevent direct sound entry into the ceiling
necessary, dust generation is beam floors by approx. 9 dB.
minimized and the leveling of bulk Improvements of up to 29 dB can be
goods is eliminated. achieved on an open wooden beam
floors. Further information:
www.wolf-bavaria.com
20
ETA N° 20/0371
Simple and fast Floor weight improvement board as a replacement for bulk fillings. Technical data PhoneStar 25
Length 800 mm
Width 600 mm
Thickness 25 mm
Weight 39 kg/m2
Fire-resistant material category E DIN EN 13501
Item number 1011
user-friendly PhoneStar 25 can be laid in multiple
layers to achieve even higher sound
dry effective insulation values.
PhoneStar 25 - as a Floor weight PhoneStar 25 - as line level / height
8 improvement board compensation 9
PhoneStar fire protection
Lightweight walls with sound and fire protection Lightweight walls with sound insulation
TIMBER STUD WALL METAL STUD WALL Tested solutions for soundproof, non-load-bearing Metal Stud Wall
ONE SIDE PANELLING WITH PHONESTAR ONE SIDE PANELLING WITH PHONESTAR
Total thickness Airborne Sound Insulation measure
Airborne sound insulation of up to 53 dB Airborne sound insulation of up to 61 dB Depiction Depiction [mm] Rw(C;Ctr) according to ISO 10140-2
Fire resistance F 30-B Fire resistance F 30-AB ** 56 dB - Plaster board* 15 mm
- EGGER Ergo Board - OSB 12 mm
1 4 Fire Resistant Plasterboard 1 4 Fire Resistant Plasterboard
- Metal Stud w. MiWo* 40 kg/m3 100 mm 154 56 dB (-3/-8)
12.5 mm acc. to DIN 18180 12.5 mm acc. to DIN 18180 - EGGER Ergo Board - OSB 12 mm
2 Insulation Layer of 40 mm Insulation Layer of 40 mm - Plaster board* 15 mm
2
Thickness minimum (30 kg/m3) Thickness minimum (30 kg/m3)
61 dB - Plaster board* 15 mm
- EGGER Ergo Board - OSB 12 mm
3 PhoneStar ST Tri - 12.5 mm 3 PhoneStar ST Tri - 12.5 mm - Metal Stud w. MiWo* 40 kg/m3 100 mm
169 61 dB (-2/-6)
- EGGER Ergo Board - OSB 12 mm
1 2 3 4 1 2 3 4 - PhoneStar Tri 15 mm
- Plaster board* 15 mm
BOTH SIDES PANELLING WITH PHONESTAR BOTH SIDES PANELLING WITH PHONESTAR 65 dB - Plaster board* 15 mm
- PhoneStar Tri 15 mm
Test report
Airborne sound insulation up to 64 dB Airborne sound insulation up to 65 dB - EGGER Ergo Board - OSB 12 mm available on request
- Metal Stud w. MiWo* 40 kg/m3 100 mm 184 65 dB (-2/-7)
Fire resistance F 30-B Fire resistance F 30-AB
- EGGER Ergo Board - OSB 12 mm Test report of
1 5 Fire Resistant Plasterboard 1 5 Fire Resistant Plasterboard - PhoneStar Tri 15 mm MFPA Leipzig
12.5 mm acc. to DIN 18180 12.5 mm acc. to DIN 18180 - Plaster board* 15 mm
PB 4.2/16-393-(1-5)
3 Insulation Layer of 40 mm 3 Insulation Layer of 40 mm *Plasterboard according to EN 520 - type DF. / Mineral wool (MiWo) according to EN 13162A1, melting temperature 1000 ° C /
Thickness minimum (30 kg/m3) Thickness minimum (30 kg/m3) Profiles metal frame: max. distance 625 mm. ** Fire protection according to REI 60 according to test certificate P-SAC-02/ III-804Ä
2 4 PhoneStar ST Tri - 12.5 mm 2 4 PhoneStar ST Tri - 12.5 mm
1 2 3 4 5 1 2 3 4 5
Single-leaf apartment partitions
FURTHER FIRE PROTECTION CLASSES
Fire Resistant Plasterboard acc. to DIN 18180 including PhoneStar
FURTHER FIRE PROTECTION CLASSES
Fire Resistant Plasterboard acc. to DIN 18180 including PhoneStar wall with sound insulation
Insulating material Plasterboard Insulating material Plasterboard
Fire hazard Fire hazard
acc. to DIN 18180 acc. to DIN 18180
class
Minimum thickness / minimum bulk density
mm / kg/m 3 on both sides
class
Minimum thickness / minimum bulk density
mm / kg/m 3 on both sides
Measurement of an apartment partition in a reference object. Apartment
The building acoustic measurement of airborne sound shows partition in
F 60-B 40/40
each 2 x 12.5 mm
F 60-AB 40/40
each 2 x 12.5 mm
the increased sound insulation R`w 56 dB between the wall prefabrication
or 1 x 25 mm each or 1 x 25 mm each
(living) and child 2 on the ground floor.
40/100
F 90-B 80/100 each 2 x 12.5 mm
F 90-AB 60/50 each 2 x 12.5 mm
Wall structure with PhoneStar Test report airborne sound insulation ISO 16283-1
Fire protection according to DIN 4102-4: 2016-05 table 10.3 and
80/30
Expertise IBB No. 6A-2017/113-Mey
Fire protection according to DIN
Retrofit New build 4102-4: 2016-05 table 10.2 and
Expertise IBB 100 mm timber board
Timber frame houses
No. 6A-2017/113-Mey
Masonry houses
12.5 mm gypsum plaster board
In an Expertise, IBB GmbH from Groß Ipper has confirmed that 15.0 mm PhoneStar Tri
PhoneStar only results in a slight deviation when used in wall 12.0 mm OSB
constructions according to DIN 4102-:2016-5.
179 mm total thickness wall
Current fire protection reports Measurement result: R´w 60 dB
are available on request Test report MB 1119
10 Sound reduction index ISO 717-1 R'w (C;Ctr) : 60 (-1;-4)dB 11
PhoneStar - Technical Data
PhoneStar floor systems - Concrete floors PhoneStar Wall systems
Initial Value PhoneStar Overall height Impact sound
Construction
System Code Depiction (Board total- improvement
Thickness of Floor: Details
thickness) Construction ∆ Lw 1 Plasterboard 12,5 mm - according to DIN 18180 All the tested system
180 mm 2 PhoneStar Tri 15 mm structures are recorded and
attached directly to the wall with Wolf wall plug fixings.
3 Solid wall 120 mm released in ETA-20/0371
CONCRETE
Laminate
SLABS Prime example
BM 1.2 8 mm Tri - 15 mm 23 mm 22 dB
Wall structure solid wall
PhoneStar
Depth of Airborne Airborne
System Construc- Construction Board Structure sound sound
No final Code tion Details Details thickness (excluding the Insulation improvement
flooring wall) Rw ∆ Rw
R’w,R = 53 dB 2 x PhoneStar
BM 1.5 Twin - 10 mm 40 mm 26 dB
L’n,w,R = 73 dB 20 mm Wood
Fibre (WF) Directly 15 mm Tri
WMZ D 1.2 27.5 mm 48 dB 6 dB
(s´ = 50 MN/m3) MASONRY plugged* 12.5 mm GKB
15 mm Tri
Wood Fibre
WMZ W 1.2 Boards 12 mm
12.5 mm 39.5 mm 50 dB 8 dB
PhoneStar ceiling systems
Plasterboard
2 x 15 mm Tri
WMZ W Wood Fibre
Boards 12 mm
12.5 mm 54.5 mm 54 dB 12 dB
1.2.2 Plasterboard
Final
Airborne
Impact sound
Initial Value:
Construction Board sound Rw = 42 dB Battens 15 mm Tri
TIMBER CEILING System Code Depiction
Details Thickness
Construction
improvement
improvement
WMZ L 1.2 decoupled 12.5 mm 70.5 mm 59 dB 17 dB
Height
∆ Rw
∆ Lw Thickness: 120 mm
60/40 Plasterboard
Battens 18 mm OSB,
WMZ L 1.2
ST Tri 12.5 mm decoupled 15 mm Tri, 12.5 mm 88.5 mm 59 dB 17 dB
OSB
Ceiling Cover Fire Resistant 60/40 Plasterboard
DHG L 1.3 Battens 48/24 55 mm 12 dB 15 dB
in Place Plasterboard Curtain walling 15 mm Tri
12.5 mm WMZ V 1.2 CW 50 12.5 mm 87.5 mm 66 dB 24 dB
insulated Plasterboard
ST Tri 12.5 mm
Fire Resistant
R’w,R = 46 dB DHG H 1.3 Wolf TPS 25 52 mm 18 dB 25 dB Mass Timber
Plasterboard
L’n,w,R = 75 dB Battens
12.5 mm WMZ L 1.2 15 mm Tri 57.5 mm 50 dB 16 dB
60/40
ST Tri 12.5 mm
Traditional Battens Fire Resis-
DHA L 1.3 55 mm 12 dB 15 dB
Timber Floor 48/24 tant Plaster- CD 60/27 15 mm Tri
board12.5 mm WMH H 1.2 Direct vibra- 12.5 mm 54.5 mm 56 dB 22 dB
Initial Value:
Rw = 34 dB tion hangers Plasterboard
ST Tri 12.5 mm Thickness: 100 mm
Fire Resistant
R’w,R = 46 dB DHA H 1.3 Wolf TPS 25 52 mm 18 dB 25 dB The values given are guide values and may vary depending on the type of overall structure and the individual construction site situation.
Plasterboard They are primarily used to compare the individual systems. * Only for cladding with plasterboard.
L’n,w,R = 66 dB 12.5 mm
Mass Timber
Battens ST Tri 12.5 mm
DHB H 1.3 60/40 Plasterboard 52 mm 11 dB 14 dB
R’w,R = 42 dB Wolf TPS 25 12.5 mm
L’n,w,R = 76 dB
The values given are guide values and may vary depending on the type of overall structure and the individual construction site
situation. They serve primarily to compare the individual systems.
Loft conversion Modular construction - PhoneStar Wall insulation
12 PhoneStar installation in one layer installation in multiple glued layers PhoneStar ST 13
PhoneStar - Technical Data
Closed wooden Beam Floors 20
ETA N° 20/0371 Mass Timber Floor 20
ETA N° 20/0371
Bare ceiling: Closed wooden beam floors Bare ceiling: 140 mm solid Timber Floor
15 mm PhoneStar Tri 10 mm PhoneStar Twin
100/240 KVH / 240 mm MF / 22 mm OSB 2 x 15 mm PhoneStar Tri 2 x 10 mm PhoneStar Twin 80 mm cement-bound grit filling finish
80 mm bound limestone grit filling finish
Suspended ceiling 4 mm Protect Floor 220 Acoustics EP 3 4 mm Protect Floor 220 Acoustics EP 3
Suspended ceiling 4 mm Protect 20 mm Gutex 40 mm Gutex gf 4 mm Protect 20 mm Steico B 40 mm Gutex gf Ln,w 52 dB 47 dB 44 dB 54 dB 49 dB 46 dB
Visible ceiling
Ln,w 59 dB 56 dB 55 dB 59 dB 55 dB 57 dB RW 57 dB 61 dB 61 dB 52 dB 56 dB 56 dB
12.5 mm GKF Ln,w 56 dB 51 dB 48 dB 58 dB 53 dB 50 dB
RW 63 dB 66 dB 67 dB 63 dB 65 dB 65 dB 12.5 mm PhoneStar Tri
60/40 Battens 12.5 mm GKB
48/24 Battens RW 53 dB 57 dB 57 dB 48 dB 52 dB 52 dB
12.5 mm PhoneStar Ln,w 42 dB 41 dB 41 dB 42 dB 40 dB 42 dB
60/40 Battens / 12.5 mm PhoneStar Tri Ln,w 38 dB 33 dB 30 dB 40 dB 35 dB 32 dB
12.5 mm GKFI RW 70 dB 78 dB 70 dB 70 dB 70 dB 70 dB Hanger Wolf TPS 25 12.5 mm GKB
RW 68 dB 72 dB 72 dB 63 dB 67 dB 67 dB
Ln,w 36 dB 37 dB 37 dB 37 dB 36 dB 38 dB
12.5 mm GKFI Bare ceiling: 140 mm solid Timber Floor
2 x 15 mm PhoneStar Tri 2 x 10 mm PhoneStar Twin
RW 80 mm cement-bound grit filling finish
Hanger 75 dB 81 dB 75 dB 75 dB 75 dB 75 dB
Wolf TPS 25 Suspended ceiling 4 mm Protect Floor 220 Acoustics EP 3 4 mm Protect Floor 220 Acoustics EP 3
12.5 mm PhoneStar Ln,w 33 dB 31 dB 34 dB 33 dB 32 dB 36 dB
Ln,w 49 dB 44 dB 41 dB 51 dB 46 dB 43 dB
12.5 mm GKFI RW 75 dB 84 dB 75 dB 75 dB 84 dB 75 dB Visible ceiling
RW 64 dB 68 dB 68 dB 59 dB 63 dB 63 dB
Bare ceiling: Closed wooden beam floors 18 mm Gypsum fiber pre-finished screed / 12.5 mm PhoneStar Tri Ln,w 53 dB 48 dB 45 dB 55 dB 50 dB 47 dB
18 mm Gypsum fiber pre-finished screed / 20 mm
100/240 KVH / 240 mm MF / 22 mm OSB 20 mm PowerFloor Light 60/40 Battens 12.5 mm GKB
PowerFloor Light 2 x 15 mm PhoneStar Tri RW 60 dB 64 dB 64 dB 55 dB 59 dB 59 dB
80 mm bound limestone grit filling finish 2 x 10 mm PhoneStar Twin
60/40 Battens / 12.5 mm PhoneStar Tri Ln,w 35 dB 30 dB 27 dB 37 dB 32 dB 29 dB
Suspended ceiling 4 mm Protect 20 mm Gutex 40 mm Gutex gf 4 mm Protect 20 mm Steico B 40 mm Gutex gf
Hanger Wolf TPS 25 12.5 mm GKB
RW 75 dB 75 dB 79 dB 70 dB 74 dB 74 dB
Ln,w 59 dB 56 dB 55 dB 59 dB 55 dB 57 dB
12.5 mm GKF Bare ceiling: 140 mm solid Timber Floor 18 mm GF pre-finished screed 18 mm GF pre-finished screed
RW 63 dB 66 dB 67 dB 63 dB 65 dB 65 dB 80 mm cement-bound grit filling finish 2 x 15 mm PhoneStar Tri 2 x 10 mm PhoneStar Twin
48/24 Battens Suspended ceiling 4 mm Protect Floor 220 Acoustics EP 3 4 mm Protect Floor 220 Acoustics EP 3
12.5 mm PhoneStar Ln,w 41 dB 40 dB 40 dB 41 dB 40 dB 42 dB
12.5 mm GKFI Ln,w 52 dB 47 dB 44 dB 54 dB 49 dB 46 dB
RW 70 dB 70 dB 70 dB 70 dB 70 dB 70 dB Visible ceiling
RW 62 dB 66 dB 66 dB 57 dB 61 dB 61 dB
Ln,w 36 dB 37 dB 37 dB 37 dB 36 dB 38 dB
12.5 mm GKFI 12.5 mm PhoneStar Tri Ln,w 56 dB 51 dB 48 dB 58 dB 53 dB 50 dB
RW 75 dB 75 dB 75 dB 75 dB 75 dB 75 dB
60/40 Battens 12.5 mm GKB
Hanger RW 58 dB 62 dB 62 dB 53 dB 57 dB 57 dB
Wolf TPS 25
12.5 mm PhoneStar Ln,w 32 dB 30 dB 33 dB 32 dB 31 dB 35 dB 60/40 Battens / 12.5 mm PhoneStar Tri Ln,w 35 dB 30 dB 27 dB 37 dB 32 dB 29 dB
Hanger Wolf TPS 25 12.5 mm GKB
12.5 mm GKFI RW 75 dB 84 dB 75 dB 75 dB 75 dB 75 dB RW 75 dB 75 dB 79 dB 70 dB 74 dB 74 dB
Bare ceiling: 140 mm solid Timber Floor 50 mm cement screed 50 mm cement screed
Bare ceiling: Closed wooden beam floors 18 mm Gypsum fiber pre-finished screed /
18 mm Gypsum fiber pre-finished screed / 24 mm 80 mm cement-bound grit filling finish 2 x 15 mm PhoneStar Tri 2 x 10 mm PhoneStar Twin
100/240 KVH / 240 mm MF / 22 mm OSB 20 mm PowerFloor Eco 2 x 10 mm
PowerFloor Eco 2 x 15 mm PhoneStar TRI
80 mm bound limestone grit filling finish PhoneStar Twin Suspended ceiling 4 mm Protect Floor 220 Acoustics EP 3 4 mm Protect Floor 220 Acoustics EP 3
Suspended ceiling 4 mm Protect 20 mm Gutex 40 mm Gutex gf 4 mm Protect 20 mm Steico B 40 mm Gutex gf Ln,w 53 dB 48 dB 45 dB 55 dB 50 dB 47 dB
Visible ceiling
RW 66 dB 70 dB 70 dB 61 dB 65 dB 65 dB
Ln,w 59 dB 56 dB 55 dB 59 dB 55 dB 57 dB
12.5 mm GKF 12.5 mm PhoneStar Tri Ln,w 57 dB 52 dB 49 dB 59 dB 54 dB 51 dB
RW 63 dB 63 dB 67 dB 63 dB 65 dB 65 dB 60/40 Battens 12.5 mm GKB
RW 62 dB 66 dB 66 dB 57 dB 61 dB 61 dB
48/24 Battens
12.5 mm PhoneStar Ln,w 41 dB 40 dB 40 dB 41 dB 40 dB 42 dB Ln,w 39 dB 34 dB 31 dB 41 dB 36 dB 33 dB
60/40 Battens / 12.5 mm PhoneStar Tri
12.5 mm GKFI RW 70 dB 70 dB 70 dB 70 dB 70 dB 70 dB Hanger Wolf TPS 25 12.5 mm GKB
RW 75 dB 75 dB 75 dB 72 dB 75 dB 75 dB
Ln,w 36 dB 37 dB 37 dB 37 dB 36 dB 38 dB Bare ceiling: 140 mm solid Timber Floor 18 mm GF pre-finished screed / PowerFloor Light 18 mm GF pre-finished screed / PowerFloor
12.5 mm GKFI 80 mm cement-bound grit filling finish 2 x 15 mm PhoneStar Tri Light / 2 x 10 mm PhoneStar Twin
Hanger RW 75 dB 75 dB 75 dB 75 dB 75 dB 75 dB
Suspended ceiling 4 mm Protect Floor 220 Acoustics EP 3 4 mm Protect Floor 220 Acoustics EP 3
Wolf TPS 25
12.5 mm PhoneStar Ln,w 32 dB 32 dB 33 dB 32 dB 31 dB 35 dB
Ln,w 51 dB 46 dB 43 dB 53 dB 48 dB 45 dB
12.5 mm GKFI Visible ceiling
RW 75 dB 83 dB 75 dB 75 dB 75 dB 75 dB RW 62 dB 66 dB 66 dB 57 dB 61 dB 61 dB
12.5 mm PhoneStar Tri Ln,w 55 dB 50 dB 47 dB 57 dB 52 dB 49 dB
The values given are guide values and may vary depending on the type of overall structure and the individual construction site situation. They 60/40 Battens 12.5 mm GKB
serve primarily to compare the individual systems. The values in bold of the assessed sound insulation indices and standard impact sound level are RW 58 dB 62 dB 62 dB 53 dB 57 dB 57 dB
measured values.
60/40 Battens / 12.5 mm PhoneStar Tri Ln,w 36 dB 31 dB 28 dB 38 dB 33 dB 30 dB
Hanger Wolf TPS 25 12.5 mm GKB
RW 73 dB 75 dB 75 dB 68 dB 72 dB 72 dB
14 15
PhoneStrip Decoupling strip
The principle of operation Design values
PhoneStrip reduces both airborne and impact flanking sound Pressure resistance
transmission due to internal friction within the product itself.
N
PhoneStrip behaves differently to most common decoupling PhoneStrip has the value Characteristic fc,k = 23.00 mm2
products. When building elements begin to vibrate as a result 1 N N
and the value Design fc,d = 1.3 * 23.00 mm2 = 17.69 mm2
of sound transmission, the quartz sand filling inside PhoneStrip The kmodvalue is not applicable to PhoneStrip.
To determine design fc,d, the value of 1.3 used in wood
converts the vibrations into kinetic energy through microscopic
as strength values for the absorption of vertical loads. construction according to DIN 1995-1-1/NA table
movements of the sand. NA.2 and 3 is used.
Cross section
The sound transmission is therefore significantly reduced.
of PhoneStrip
The basis for the values given in ETA-20/0371 were tests Due to the high strength values, PhoneStrip can usually
at the MPA Bau at TU Munich. The results were adopted be used independently of the static loads without
Certified pressure-resistant innovative 1:1 in the ETA 20/0371. additional calculation.
AZ: 18-G-027 Wolf PhoneStar Entkopplungsstreifen
Gutachterliche Stellungnahme zum Tragverhalten und zur Dauerhaftigkeit
Seite 6 von 12
Certified for Europe Deformation behaviour According to ETA 20/0371, PhoneStrip has a maximum deformation at
fc, k = 23.00 N/mm2 of 3.5 +/- 0.5 mm (according to EN 26891 Tab 2).
4 Tragfähigkeit und Dauerhaftigkeit
20 AZ: 18-G-027 Wolf PhoneStar Entkopplungsstreifen The deformation under loads common in wood construction with a
ETA N° 20/0371 Gutachterliche Stellungnahme zum Tragverhalten und zur Dauerhaftigkeit
4.1 Tragfähigkeit Seite 6 von 12
wall-ceiling joint of 2.5 N/mm2 is specified in the ETA as 1.2 +/- 0.5 mm.
PhoneStrip is CE-certified as a decoupling strip for absorbing vertical
4.1.1 Ergebnisse aus Kurzzeit-Untersuchungen des MPA Bau
loads. All properties and applications as decoupling bearings for use in
Das MPA Bau der TU München hat 6 Handmusterproben des Produkts PhoneStar Professi- 4 Tragfähigkeit und Dauerhaftigkeit
Europe
onal Line-Tri 15 mm auf ihre Druckfestigkeit hin geprüft. Dabei wurden die Probekörper (PK are regulated and approved on the basis of ETA-20/0371. Stress-strain curve
2 – PK 6) mit einer maximale Prüfkraft von 526 kN (maximal mögliche Maschinenlast)
4.1 Tragfähigkeit
belastet, welche bezogen auf die Fläche der Probekörper einer Flächenlast von ca.
23 N/mm² entspricht. Die Belastung erfolgte in Anlehnung an das Prüfschema der DIN EN
26891. Nach Aussage des MPA Bau sind auf Grund des Aufbaus des Produktes allerdings 4.1.1 Ergebnisse aus Kurzzeit-Untersuchungen des MPA Bau
höhere aufnehmbare Druckkräfte zu erwarten. Zur Schubtragfähigkeit wurden keine Unter- Das MPA Bau der TU München hat 6 Handmusterproben des Produkts PhoneStar Professi-
suchungen durchgeführt. onal Line-Tri 15 mm auf ihre Druckfestigkeit hin geprüft. Dabei wurden die Probekörper (PK
2 – PK 6) mit einer maximale Prüfkraft von 526 kN (maximal mögliche Maschinenlast)
4.1.2 Beurteilung des Tragverhaltens belastet, welche bezogen auf die Fläche der Probekörper einer Flächenlast von ca.
23 N/mm² entspricht. Die Belastung erfolgte in Anlehnung an das Prüfschema der DIN EN
Zur Beurteilung der festgestellten Druckfestigkeit der PhoneStar-Streifen ist entscheiden,
26891. Nach Aussage des MPA Bau sind auf Grund des Aufbaus des Produktes allerdings
welche Beanspruchung die Trennstreifen im vorgesehenen Anwendungsfall – Trennstreifen
höhere aufnehmbare Druckkräfte zu erwarten. Zur Schubtragfähigkeit wurden keine Unter-
Deformation (mm)
zwischen Massivholzbauteilen – überhaupt erfahren können. Die maximale Beanspruchung,
suchungen durchgeführt.
Common loads in wood construction
die auf einen PhoneStar-Streifen einwirken kann, kann nicht höher liegen, als die Festigkei-
ten der gestoßenen Bauteile selbst. Als Trennlage zwischen Holzbauteilen kann also maxi-
mal die Druckfestigkeiten des verwendeten Holzes senkrecht oder parallel zur Faserrichtung 4.1.2 Beurteilung des Tragverhaltens
erreicht werden. Zur Beurteilung der festgestellten Druckfestigkeit der PhoneStar-Streifen ist entscheiden,
welche Beanspruchung die Trennstreifen im vorgesehenen Anwendungsfall – Trennstreifen
The maximum load in wood construction occurs with a wall-to-wall joint (end grain on end
zwischen Massivholzbauteilen – überhaupt erfahren können. Die maximale Beanspruchung,
die auf einen PhoneStar-Streifen einwirken kann, kann nicht höher liegen, als die Festigkei-
grain). Using the example of a laminated timber wall of strength class GL 24h under a short
ten der gestoßenen Bauteile selbst. Als Trennlage zwischen Holzbauteilen kann also maxi-
mal die Druckfestigkeiten des verwendeten Holzes senkrecht oder parallel zur Faserrichtung
PhoneStrip exposure period (kmod = 0.9), the maximum transferable surface load is: erreicht werden.
N 0.9 N N
Characteristic fc,0,k = 24.00 mm2
Design fc,0,d = 1.3 * 24.00 mm2 = 16.61 mm2
PhoneStrip
The characteristic value only slightly exceeds the area load achieved in the test.
Wall-wall joint.BSH
Wand-Wand-Stoß, BSH Wand-Decken-Stoß, BSP
Abbildung 3: Mögliche Beanspruchung des Produktes For a wall-ceiling joint, the maximum surface load
corresponds to the compressive strength of the ceiling component
across the fiber. For wood-based materials, this is 2.5 N/mm2. Tension [N/mm2]
Wand-Wand-Stoß, BSH WallWand-Decken-Stoß,
to floor joint joint.
BSPBSP
Abbildung 3: Mögliche Beanspruchung des Produktes
The deformation values were tested according to the test scheme of DIN EN 2689 at the MPA Bau in Munich and the evaluation
16 is included in ETA 20/0371. 17
PhoneStrip - Sound properties
PhoneStrip PhoneStrip test
Entkopplungsstreifen results PhoneStrip Test results L-joint
Entkopplungsstreifen
Übertragungsweg Decke/Untere Wand L-Stoß
Transmission route
Übertragungsweg floor / lower
Decke/Untere Wandwall L-Stoß
L-joint
Übertragungsweg Decke/Untere Wand L-Stoß
Tested build-up:
+ Floor: 140 mm, 5-layer CLT Wall to floor joint
PhoneStrip + Lower wall: 100 mm, 3-layer CLT with PhoneStrip
PhoneStrip
PhoneStrip
15 mm
PhoneStrip
15
15 mm
15 mm
mm
Joint execution & connecting material:
Kij = 16,0 dB
+ Floor / lower wall:
Kij = 16.0 dB
Kij
Kij ==
Kij = 16,0
16,0 dB
16,0 dB
dB PhoneStrip 15 mm; countersunk head
screws with full thread 8.0 x 240/230
Prüf-Nr.: B17-278-A11004-319a_bu mm at 30 cm centres.
Prüf-Nr.:
Prüf-Nr.: B17-278-A11004-319a_bu
B17-278-A11004-319a_bu
T-joint
Transmission route
Übertragungsweg floor / lower
Decke/Untere wall
Wand T-Stoß
Übertragungsweg
Übertragungsweg Decke/Untere
Decke/Untere Wand
Wand T-Stoß
T-Stoß
Tested build-up:
+ Upper Wall: 100 mm, 3-layer CLT
+ Floor: 140 mm, 5-layer CLT
PhoneStrip + Lower wall: 100 mm, 3-layer CLT
PhoneStrip
PhoneStrip
15 mm
PhoneStrip
15
15 mm
15 mm
mm Joint execution & connecting material:
+ Floor / upper wall: PhoneStrip 15 mm; angle joint
Kij = 17.0 dB
Kij = 17,0 dB
Kij
Kij ==
Kij = 17,0
17,0 dB
17,0 dB
dB 105 x 105 x 90 mm screwed at 106 cm centres
+ Floor / lower wall: PhoneStrip 15 mm; countersunk head screws The flanking sound transmission value
Prüf-Nr.: B17-278-A11005-319a-c_bu
Prüf-Nr.:
Prüf-Nr.: B17-278-A11005-319a-c_bu
B17-278-A11005-319a-c_bu with full thread 8.0 x 240/230 mm at 30 cm centres was determined in Graz University of
Technology in accordance with EN ISO
Übertragungsweg Obere Wand/Untere Wand 10848-1:2006. The calculation took place
Übertragungsweg
Transmission
Übertragungsweg Obere
route Wand/Untere
upper
Obere Wand
wall / lower
Wand/Untere Wandwall
within the frequency range (see dotted
line).
Test according to EN ISO 10848-1:2006 TU Graz / test report PhoneStrip L-joint
B17-278-A11004-319a_bu
PhoneStrip
PhoneStrip
PhoneStrip
15 mm
PhoneStrip
15
15 mm
15 mm
mm
Kij = 21,8 dB
Kij = 21.8 dB
Kij
Kij ==
Kij = 21,8
21,8 dB
21,8 dB
dB
Prüf-Nr.: B17-278-A11005-319a-c_bu
Prüf-Nr.:
Prüf-Nr.: B17-278-A11005-319a-c_bu
B17-278-A11005-319a-c_bu
Übertragungsweg Decke/Obere Wand
Übertragungsweg
Übertragungsweg Decke/Obere
Decke/Obere Wand
Wandwall
Transmission route floor / upper Tested build-up with
angle joints and
Kij = 17,3 dB screws
Kij
Kij =
Kij = 17,3
Kij
= =dB
17,3
17,3 dB
dB
17.3 dB
PhoneStrip
PhoneStrip
PhoneStrip
15 mm
PhoneStrip
15
15 mm
15 mm
mm
Prüf-Nr.: B17-278-A11005-319a-c_bu
Prüf-Nr.:
Prüf-Nr.: B17-278-A11005-319a-c_bu
B17-278-A11005-319a-c_bu PhoneStrip can also be used as a Complete test certificates
shadow gap
are available on request
18 19PhoneStrip - Technical Data
*
Technical Data Processing
PhoneStrip decoupling strips have been specifically designed
for use on building sites. CUT
All the edges are sealed with a special adhesive tape. The length is cut with a knife or
When installed, the seal creates water resistance, increases jigsaw.
the impact resistance of the edge and makes the butt joint
TAPING
airtight.
The open cut edge can easily be
closed again with PhoneStrip Tape.
PhoneStrip Technical Data
Length 1200 mm ± 3 mm
Width from 50 mm to 240 mm
Thickness 15 mm ± 1 mm
Density 1300 kg/m 3
LAYING
Weight 19 kg/m2 The decoupling strips can be nailed, glued
Fire-resistance class B2/E DIN 4102/EN 13501 or screwed to the construction to fix the
Pressure resistance: Characteristic fc,kw 23.00 N/mm 2
ETA-20/0371 position, whereby the laminated side
Pressure resistance:: Design fc, d 17.69 N/mm2 must point towards the outside weather.
Security factor 1.3 according to DIN 1995-1-1/NA, table NA.2 and 3 Installation in the rain does not harm the
Kmodvalue 0 ETA-20/0371
decoupling strip according to
Final deformation at 2.5 N/mm2 1.2 mm +/- 0.5 mm ETA-20/0371
ETA 20/0371.
Kij-value L-joint 16 dB EN ISO 10848-1:2006
SERVICE LIFE
Kij-value T-joint 17 dB Ceiling / lower wall
The ETA 20/0371 certifies PhoneStrip
17.3 dB Ceiling / Upper wall
for an unlimited lifespan when properly
21.8 dB upper wall / lower wall
installed and in a dry environment.
Thermal Conductivity 0.17 W/(mK) DIN 4108-3:2001-07
Thickness swelling 2% after 24 h of keeping it in cold water Further information:
Natural weathering maximum 4 weeks in installed condition www.wolf-bavaria.com
environmentally friendly effective tested
Areas of application The Features and Benefits of PhoneStrip
SAND WOOD
+ Naturally made of sand and wood
+ Sound decoupling is not related to the on-site design load
+ No risk of mix-up of grade to be used - versatile product
+ Easy to specify
+ High performance in low frequency range
Photo credit: Dormeier Carpentry
* The color of the adhesive tape may vary.
20 21Practical report on decoupling with PhoneStrip
PhoneStrip PhoneStrip in
Entkopplungsstreifen practice PhoneStrip PhoneStrip in
Entkopplungsstreifen practice
QUESTION: How does the PhoneStrip decoupling strip affect the QUESTION: How high is the Kij (joint insulation dimension
impact sound level? without using PhoneStrip?
STEP STEP
REQUIREMENT: The following values serve as the basis for the calculation: The airborne sound
01 INITIAL SITUATION: Two identical apartment dividing ceilings, 03
(Rw) of the wall, impact sound (Lnw) of the ceiling and the joint insulation dimension (Kij) of the
with and without a decoupled T-joint, were built in one property.
wall to be checked.
STRUCTURE 1 STRUCTURE 2
Wall structure
Wall and ceiling construction Wall and ceiling structure
without PhoneStrip with PhoneStrip in the T-joint
12.5 mm gypsum plaster board
15 mm Oak floorboards
70 mm Cement screed 12.0 mm OSB
30 mm MIWO EP1
20 mm Soft wood fiber
100 mm wooden board
70 mm Lime chippings, loose
PhoneStrip
15 mm
CLT Visible ceiling CLT Visible ceiling Schallschutznachweis nach DIN EN ISO 12354-1:2017 Schallschutznachweis nach DIN EN ISO 12354-1:2017
Trittschalldämmmessung 3: - Anlage 3 – Measurement Rw = 38 dB
ttschalldämmmessung 4: - Anlage 4 – Bodenaufbau in mm Bodenaufbau: in mm
15 Eichendiele 15 Eichendiele
Wooden wallboard Calculation value of the structures: Impact sound Ln,w = 44 dB Airborne sound Rw = 73 dB Wooden wallboard
70 Zementestrich Sound reduction index ISO 717-1 R´w (C; Ctr): 38 (-2;-6) dB 70 Zementestrich
Joint insulation dimension Kij = 17 dB
30 MIWO EP 1 s'PowerFloor
super light super slim
easy to install
WOOD ALUMINUM
• Fast reaction time and precise • Versatile in use due to low weight
controllability and thin construction height of 20
• Constructions are available to suit or 24 mm
all finished floor coverings • Available with and without high
• The individually created installa- quality 16mm plastic and metal
tion plan ensures simple and quick composite pipes.
processing.
PowerFloor is ideal for low tem-
perature heating systems. A water
temperature control unit allows con-
nection to existing heating systems
UNDERFLOOR HEATING
PowerFloor - an inspiring product
Advantages Without aluminium heat conduction sheet
The system
5 Inspiring Advantages! Comparison: Heating reaction of PowerFloor compared to Heated Screed Heat distribution in conventional systems
for individual requirements
+ Free design planning °C
√ Possible Cost Savings up to + Fast Installation and immediately usable
30% depending on the living Homogeneous heat distribution*
+ Full surface heat 25
24
conditions
Wolf PowerFloor with an aluminum heat-conducting plate + Immediately ready for final floor covering
+ Pleasant radiant heat 23
+ Low flow temperature 22 + No drying time
21
+ Suitable for solar and 20
Aluminum
heat-conducting
sheet
+ No heating costs during floor construction
Heated screed
heat pumps 19
18
Saving potential
PowerFloor
Pipe distance 250 mm + Construction height 2 - 2.4 cm
17
Time
Desired temperature
+ The underfloor heating reacts promptly to changes
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 in temperature
Aluminum
heat-conducting
+ High energy efficiency, saves heating costs
PowerFloor adapts to the desired temperature faster and can thus reduce
sheet
operating costs. Source: Arge Stiba + System only weighs 3 - 6 kg/m2 approx.
Pipe distance 125 mm
* The task of underfloor heating is to heat the room. In the case of drying systems, inhomogeneous heat distribution in the floor area can occur due to differently arranged floor
24 areas (aluminum distribution) and low pipe coverings. However, this does not limit the room heating function. 25PowerFloor
Product range Packages
Our PowerFloor product line is suitable for a wide range of applications.
The correct selection depends on the heating medium
and the subsequent end covering. All of our systems are available as package solutions
PowerFloor packages include: - Floor heating elements
Light - Perimeter filling elements
PowerFloor Light - Perimeter flanking strips
LxWxH: Straight Element: - Plastic and metal composite pipes
1000 x 500 x 20 mm ø 16 mm
Deflection: - Compression fitting
250 x 500 x 20 mm - Planning
Material: Honeycomb cardboard interior Example image
with aluminium strips between pipes on the
straight elements. Aluminium not included
on curved elements. Planning and installation
Sheet thickness: 0.4 mm Pipe distance: 250 mm Pipe distance: 125 mm
Compressive strength: 500 kPA The PowerFloor elements will be installed
Weight: approx. 2.1 kg/m2 according to a plan generated by Wolf Bavaria.
For each heating circuit, the metal composite pipe
is pressed into the grooves of the elements and
Slim Nature Eco plus connected to the distributor.
PowerFloor can be connected to both low-
PowerFloor Slim PowerFloor Nature PowerFloor Eco plus
temperature and high-temperature heating
LxWxH: Straight element: LxWxH: Straight element: LxWxH: Straight element:
1000 x 500 x 24 mm 1000 x 500 x 24 mm 1000 x 500 x 24 mm
systems (with fixed value control set).
Deflection: Deflection: Deflection:
250 x 500 x 24 mm 250 x 500 x 24 mm 250 x 500 x 24 mm
Material: Material: Material:
Honeycomb board with thick Honeycomb board without an Light wood fibre with aluminum
Preliminary plan
aluminum film aluminium heat-conducting plate heat-conducting board
(deflection excluded) (deflection excluded)
Foil thickness: 0.4 mm Compressive strength: 500 kPA Sheet thickness: 0.4 mm
Compressive strength: 500 kPA Weight: approx. 2.1 Kg/m 2 Compressive strength: 200 kPA
Weight: approx. 2.2 Kg/m2 Weight: approx. 7.1 Kg/m2
Easy to lay.
Layout plan
Pipe distance: 125 mm Pipe distance: 125 mm Pipe distance: 125 mm
Mounting on the wall
Further information:
26 complete individual exclusive www.wolf-bavaria.com 27Wolf Cell Height compensation board
Wolf Cell - Pressure-resistant height
compensation Easy processing
Wolf Cell is ecological and pressure- Compressive strength Problem CUTTING
resistant height compensation for Common materials for height com- Wolf Cell can be processed easily
floor constructions. pensation usually have a compres- and quickly with a cutter knife.
Petroleum-based materials are sive strength of less than 100 kPa
mostly used to compensate for at 10% compression, as these are
the height of pipes and ventilation usually insulation materials. DISPOSAL
ducts. It is often not possible Wolf Cell has a compressive Remains of the Wolf Cell can be
to use balancing and strength of over 5 KN/m2 * aus. safely disposed of as waste paper.
filling materials such
That is why, when using Wolf Cell,
as grit or other fillings.
there are fewer movements in the
Ecological materials in the
floor due to point and surface loads.
form of mineral or rock wool
Among other things, This enables
are available, as well as wood fiber
the simple laying of large-format
insulation materials, but process-
tiles without complex measures dur-
easy to process
ing is complex and less pressure-
ing execution. A big advantage with
resistant.
dry screeds.
pressure-resistant recyclable
If different insulation materials are
combined in the structure, they
Wolf Cell Technical Data can have a negative impact on the
impact sound insulation. Wolf Cell is INSTALLATION
Board dimensions 1200 x 800 mm
largely neutral here. Wolf Cell is suitable for structures with wet and dry screed.
Available thicknesses in mm 30 40 60 70 80
The board must be protected against rising moisture.
Weight VE in kg/m2 1.40 1.72 2.23 3.69 3.77
Item number 6002 6003 6004 6005 6006
Suitable for point loads up to 4 kN*
Compressive strength 5 KN/m2 * More information:
www.wolf-bavaria.com
Fire-resistant material category B2 according to DIN 4102/E according to EN 13501
* In conjunction with Wolf HUGO N+F.
Advantages of Wolf Cell
+ Very high resistance to compression
+ Easy to process
+ Ecological material
+ Easy disposal as waste paper
+ Suitable for large tile formats
+ Complements the Wolf Floor system
Wolf Cell can be laid in
28 multiple layers. 29Special products & accessories
Rapidly to the destination - Time-saving and clean when processing
with the right accessories
Wolf joint filler -
Wolf Tape - for masking Joint sealing in
cut edges on PhoneStar wall, floor and ceil-
Wolf Hugo N & F - Gypsum fiber boards. ing connections.
dry screed with tongue and groove Item no. 4095
connection. Simple laying with Wolf Hugo
glue - without screw connections.
Item no. 3082
Wolf Cell - the pressure-resistant board for
leveling the installation (pipe and ventilation
ducts). Item no. 1100 Wolf system glue -
Item no. see page 28 Item no. 1120
for gluing Phone
Item no. 1110 Star and Power-
Wolf Protect - Soft wood fiber decoupling Floor panels onto
board for use as a base for Wolf floor board, chipboard or
systems. OSB substrates.
Item no. 3081 Item no. 4070
Wolf decoupling board - To create a decoupling
Wolf Hugo
level on PhoneStar for laying tiles and
glue - for glueing
natural stone, as well as an alternative
HUGO boards to
dry decoupling level for parquet.
Item no. 3091
each other.
Item no. 4075
time-saving Wolf Roller adhesive - for glueing
PhoneStar boards and
Wolf parquet adhesive - for glueing
PhoneStar onto solid substrates and
PowerFloor underfloor heating. parquets.
effective Item no. 4085 Item no. 4080
Attachment material
Wolf TPS 25 - System Wolf system dowel - for the direct
vibration hangers, consisting of: mounting of PhoneStar on a solid wall
Profile, spring clip with screws and Item no. 4200 / 4201 / 4207 / 4205
connector.
Item no. 4400 / 4402 / 4403
Drywall screw for plasterboard on PhoneStar
- with an existing substructure
Item no. 4202/4208
Drywall screw fine thread
- for PhoneStar on metal structures
Item no. 4251
Drywall screw coarse thread
- for PhoneStar on wooden structures
Item no. 4253
30 * Excerpt from our range of accessories. You can find more products in our price list. 31Modular system solutions
The modular building block system Advantages that enthuse:
Dry screed systems compared to wet screed
The completely dry system solution of Wolf Bavaria:
+ dry screed (PhoneStar/Wolf Hugo)
+ Underfloor heating (PowerFloor)
Wolf Bavaria
+ Sound insulation (PhoneStar)
+ A comprehensive range of accessories Dry screed systems
Advantages: HANDLING
Easy and quick installation
+ Fast, easy and clean to install
Modular system elements
+ Ecological and economical Everything from a single source
+ No additional moisture
+ Natural raw materials CONSTRUCTION PERIOD
Everything from a single source All structures/ Shortened construction time since there is no
constructions are drying time
According to your needs 20
ETA N° 20/0371 included in the CE. No moisture entry
Fast covering maturity of the top covering
A well-thought-out structure SOUND INSULATION
Improvement of impact sound insulation with
PhoneStar
Wolf Hugo N & F or STRUCTURE HEIGHT / WEIGHT
Wolf decoupling board Slim built height
• Load distribution Weight reduction
• Even heat distribution
COSTS
Underfloor heating Wolf PowerFloor Reduction of coordination costs by system
• Underfloor heating in dry construction supplier
• With or without an aluminum heat-con-
Wet screed
ducting board
Sound proofing panels PhoneStar
• Sound insulation
• Dry screed HANDLING
• Load distribution Contribution by specialist companies
Wolf Protect / Wolf Cell CONSTRUCTION PERIOD
(pressure-resistant compensation) Drying time necessary
• Insulation and line level
• Installation level
Can be used in
SOUND INSULATION
Floors, walls & ceilings Increased risk of sound bridges
PhoneStar 25 Floor
floor weight improvement board STRUCTURE HEIGHT / WEIGHT / WATER
Loss of space due to structure
• Leveling
New buildings Increased ceiling load and
Introduction of water
PhoneStrip Decoupling strip Retrofit COSTS
• Flank decoupling
• Shadow gap Wood construction Possible additional costs for
CM measurements as well as for subsequent
surface treatment
Solid construction
32 Soundproofing panels Underfloor heating Accessories 33Measurement technology / research & development
precise
progressive
standardized
Our Service - Your Safety
+ Sound measurements in a real + Evaluation of the measurement
object based on the ISO 717 standard
+ Impact sound orientation + Determination of the single values
according to ISO 140 of the impact and airborne sound
We measure the sound insulation insulation
of your floor and wall structures. This basis is used for advice on floor
With a standard hammer and wall structures in new buildings
mechanism, impact sound is and for upgrading existing buildings.
generated on a ceiling and the + Review of the results after
incoming impact sound level is consultation and installation We always keep thinking one
measured in the room below.
The result is satisfied planners,
+ Airborne sound oriented house construction companies, step ahead
according to ISO 140 processors and customers. Federal award for
Analogously, the airborne sound In order to come closer to our vision of dry, ecologically sensible buildings,
excellent innovative
insulation of floors and walls is we are continuously expanding in all areas. Since sustainable management
services for the craft
determined with a dodecahedron and ecology play an important role in our company philosophy, we rely on
industry
loudspeaker. short distances and regionality. To achieve this, we have invested in a large
SELF center (training, development, logistics and research center) at our
company headquarters in Heilsbronn.
Three steps to the optimal result There is plenty of space here for research & development and training, but
also for optimizing warehouse management and for efficient order picking.
STEP STEP STEP
ANALYSIS OF THE 01 ADVICE
on system
02 EXAM of 03 RESULT
STATUS QUO optimization Test centers/institutes: Further information:
construction
ift Rosenheim • MPA Leipzig www.wolf-bavaria.com
IBB • Kit Karlsruhe • Kiwa
Fraunhofer • Institut TU Munich Innovation prize Construma 2019
To the best of our knowledge, the information provided in this prospectus represents our findings and experience to date. The data listed is a guideline and not contract data.
These guide values may vary depending on the type of structure. We will pass them on without liability. Changes in terms of technical progress and operational development
are reserved. Our information merely describes the characteristics of our products and services and does not represent a guarantee. The customer is not exempt from a careful
34 examination of the functions or applications of the products by qualified personnel. 35Everything from a single source
System solutions for all new build and retrofit projects
Your Wolf Bavaria specialist dealer
Wolf Bavaria GmbH Phone: +49 (0) 9872,953 98 0
Gutenbergstraße 8 Fax: +49 (0) 9872 953 98 - 11
91560 Heilsbronn Email: info@wolf-bavaria.com
Germany www.wolf-bavaria.com
Wolf Bavaria assumes noliability for printing errors. With the publication of this edition, all previous versions lose cease to be valid. © Copyright Wolf Bavaria GmbH, 2020. Edition June 2020You can also read
