Dräger Technical Training North America Optimizing productivity and safety 2018 / July - December - Draeger
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
D-57022-2014
Dräger Technical Training ANESTHESIA
VENTILATION
North America WARMING THERAPY
MONITORING &
Optimizing productivity and safety HEALTHCARE IT
2018 / July - December
02 |
CONTENTS
Introduction 03
General Information 04 - 05
Travel and Hotel Information 06
Anesthesia 07
Ventilation 08
Warming Therapy 09
Monitoring & HealthCare IT 10 – 13
Course Codes and Schedules 14 – 15
Registration 16 – 17
| 03
Comprehensive
Education
Technology for Life
The expression “Technology for Life” has more behind it than just excellent equipment.
We understand the support required to be successful. Dräger Training plays a major
role in enhancing care processes. Our holistic approach includes exceptional support
capabilities, which help ensure that your care processes run as smoothly and efficiently
as possible. After all, equipment provided for life support requires capable personnel
for proper operation and service.
Our education and training tools make the most Dräger is committed to providing technical training
of your resources. We offer a modular approach courses designed to assist you in meeting your
to education and training in three different areas – obligations of providing productivity and safety
from basic device training to application know-how with Dräger quality products and Dräger user and
and management knowledge skills. With improved maintenance courses.
equipment knowledge and user’s skills, equipment
can be used more effectively and confidently. THE DRÄGER TRAINING MISSION
Enhancing management knowledge skills empowers It is our goal to enhance the knowledge and
managers and staff to improve care processes. proficiency of our customers on the maintenance
and service of their Dräger products.
D-52654-2012
04 |
General Information
LANGUAGE, SCHEDULE, DRESS CODE REGISTRATION AND CONFIRMATION
All Dräger technical education courses that are conducted Seminar space is limited and students are enrolled on
in North America are done so using the American English a first-come, first-served basis. A letter of confirmation
language as are the training materials. will be sent to the registrant via U.S. Mail, fax or email to
confirm registration. Read this letter carefully. If corrections
Please observe the following requirements and restrictions. are needed, contact our Triage Center immediately.
— Classes typically begin promptly at 8:30 a.m. (classrooms
open at 8:00 a.m.) and end at 4:30 p.m. each class day. EQUAL OPPORTUNITY STATEMENT
No students are allowed in the classroom prior to 8:00 a.m. Dräger is an equal opportunity employer and educator.
— Due to the logistics of travel to the nearest airport (PHL), Dräger does not discriminate against otherwise qualified
it is recommended that no departure flights be booked learners on the base of race, color, creed, religion, sexual
earlier than 7:00 p.m. on the last class day. orientation, gender identity, ancestry, national origin,
— Dress code is business casual. No shorts or open toe age, disability, veteran status, marital status, or any other
shoes are permitted. characteristic protected by law.
PRE-REQUISITES AND CONTENT COURSE MATERIALS
The courses are designed with the idea that the participants All technical service manuals and service-related materials
have been exposed to the general function of the product(s) are in electronic format only. Each student will receive a
being discussed. one year license (from the date training was completed)
to Basic ServiceConnect® which provides access to the
Dräger does not perform component repairs to printed technical documentation for which the student is trained.
circuit board assemblies in the field and accordingly does A signed license agreement is required to access Basic
not recommend the participant doing so. Component repairs ServiceConnect® and is available for purchase beyond the
are done only at Dräger’s manufacturing plant by specifically first year. For minimum computer requirements and a brief
trained technicians, using appropriate and sophisticated test description of the ServiceConnect® software and additional
fixtures and equipment. All courses have been designed with forms required to receive this software, please contact the
this philosophy in mind. DrägerService® Triage Center at 800-437-2437, option 4.
All Dräger training personnel are full-time employees of TESTING
Draeger, Inc. They are not paid spokespeople for any Each course concludes with a timed written or practical
additional third party product or service. By attending this exam. Seminar participants must attain a grade of 70% or
training, it is understood that the academic focus will be better to satisfactorily complete each course. Certificates
on the Dräger equipment that is currently (or soon to be) and Continuing Education Units (CEU’s) are only issued
in possession of or contractually managed by the trainee’s following satisfactory completion for the course. A grade
employer. transcript will be issued upon request for a nominal fee.
COPYRIGHT Those participants that attain a grade less than 70% can
Dräger Technical Training is proprietary and all content is retest for a $300.00 administrative fee which can be taken
the property of Draeger, Inc. What you see and hear during the same day (time permitting) or within a six month period.
all Dräger technical courses are copyrighted and audio and
video recordings are not permitted. Attendance and successful completion of a technical
education course does not guarantee that the participant
TUITION may purchase parts for repair or replacement from Dräger.
Your tuition payment covers the cost of all course materials, Nor does it imply that the participant has a complete working
instruction, lunch and refreshments. Prices are subject knowledge of Dräger equipment. It is the institution’s
to change without notice. All travel, expenses and hotel responsibility to determine the technical aptitude of the
accommodations, including meals outside of Dräger, are technician.
the sole responsibility of each registered participant. Tuition
payment MUST be provided at the time of registration.| 05
Attendance and successful completion of the Monitoring CANCELLATION POLICY
and Healthcare IT training courses does not prepare the Substitute attendees are not permitted. Training either
student for installation or configuration of Dräger’s complex purchased by a healthcare institution or included in a
systems. The courses are designed to provide basic strategic alliance agreement, may only be used by individuals
information for first call troubleshooting and basic repairs. directly employed by that healthcare institution.
These systems should be installed by an appropriately
trained Dräger representative(s), under the guidelines of Cancellations received, in writing, 15 business days prior to
approved procedures established by Dräger. the course will not be billed for the seminar. A fee of 50%
of the total tuition will be charged for cancellations less than
TRAINING RECORDS 15 business days of the scheduled seminar date. Please
All Dräger training events are registered with a permanent note that if you do not cancel in writing and do not attend,
training database. A record of student attendance is you are still responsible for payment. Dräger reserves the
available (what course, where offered, when conducted) right to cancel or change the course dates due to low
upon written request only from the learner who attended the enrollment or other unforeseen circumstances. If Dräger
course. Training records are not released to any third party cancels a course, you will be provided with a minimum of
or employer per Dräger’s training privacy policy. Please 15 business day’s notice and the full tuition will be refunded
contact DrägerService® Triage Center at 800-437-2437, or applied toward any future course. Cancelled students
option 4 for more information regarding transcripts. will be placed on a priority list for the next available course.
Dräger cannot be held liable for non-refundable travel
expenses in the event of a course cancellation.
D-475-201706 |
Travel & Hotel Information
TRAVEL HOTEL ACCOMMODATIONS
All travel expenses and reservations including airline, rental (These locations are suggestions – the participant is not
car and hotel accommodations are the responsibility of required to stay at these facilities)
the participant. Lunches on seminar days are provided and
included as part of the tuition fees.
To allow for adequate travel time to the airport, departing Near the Telford, PA (USA) Training Center
flights should not be scheduled less than three (3) hours
following the conclusion of the course. All seminars end
Staybridge Suites (215) 393-8899
no earlier than 4:30 p.m. on the final day.
119 Garden Golf Boulevard · North Wales, PA 19454.
Participants are responsible for arranging their own
Homewood Suites (215) 362-6400
transportation to and from the airport and the Dräger
1200 Pennbrook Parkway · Lansdale, PA 19446
facilities. Information concerning rental cars should be
obtained from your travel service provider.
Holiday Inn Express (215) 529-7979
1918 John Fries Highway · Quakertown, PA 18951
Our corporate facilities are access badge controlled and
students should report to the main lobby upon their initial
Hampton Inn (215) 536-7779
arrival on the first day of the seminar to obtain a visitor
1915 John Fries Highway · Quakertown, PA 18951
badge.
Spring Hill Suites (215) 529-6800
The Telford, PA (USA) Training Center is located
1930 John Fries Highway · Quakertown, PA 18951
approximately 45 miles northwest of Philadelphia
International Airport and approximately 35 miles south of
Marriott Courtyard - Montgomeryville (215) 699-7247
Lehigh Valley International Airport. The corporate address is:
544 Dekalb Pike · North Wales, PA 19454
Draeger, Inc.
Residence Inn - Montgomeryville (267) 468-0111
3135 Quarry Rd.
1110 Bethlehem Pike · North Wales, PA 19454
Telford, PA 18969
The Mississagua, ON (Canada) Training Center is located Near the Mississuagua, ON (Canada) Training Center
approximately 1 mile southeast of Toronto Pearson
International Airport. The corporate address is:
Homewood Suites Toronto Airport (416) 646-4600
5515 Eglinton Avenue West · Toronto, ON M9C 5K5
Draeger Medical Canada, Inc.
2425 Skymark Ave, Unit 1&2
TownePlace by Marriott-Airport (800) 257-3000
Mississauga, ON L4W 4Y6
5050 Orbitor Drive · Mississauga, ON L4W 4X2
Residence Inn by Marriott Mississauga (905) 602-7777
5070 Creekbank Road · Mississauga, ON L4W 5R2| 07 Anesthesia APOLLO® DAYS P/N COURSE CODE COST *USD PREREQUISITE 5.0 1902156 DSU3081NET $10,970.00 None During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Apollo anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). FABIUS® FAMILY DAYS P/N COURSE CODE COST *USD PREREQUISITE 4.0 1902166 DSU3021NET $5,735.60 None This course is designed to introduce the biomedical professional to the Fabius family of anesthesia machines. All of these anesthesia machines incorporate ventilation features and hardware not found on other anesthesia devices, as well as new technologies in the gas delivery system. The course includes instruction on the pneumatic and absorber systems, ventilator, monitor technologies, and a detailed Preventive Maintenance Inspection procedure. FABIUS® MRI DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS) 1.0 1902535 DSU3022NET $1,872.00 Fabius Family This course is designed to introduce the biomedical professional to the Fabius MRI anesthesia machine. This course will focus on the differences between the Fabius MRI and the rest of the Fabius family. Included will be disassembly and reassembly of the unit and a complete peruse checkout. This course is designed as an experiential exercise with presentations on the MRI environment. An instructor is present at all times to assist and answer questions. PERSEUS® DAYS P/N COURSE CODE COST *USD PREREQUISITE 5.0 MQ09298 DSU3087NET $9,559.00 None During this course, the biomedical professional will receive information about the new and advanced technologies associated with the Perseus anesthesia machine. This anesthesia system incorporates additional ventilation features not found on other anesthesia equipment. This course includes instruction on pneumatic systems and components, ventilator/absorber systems, monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). PRIMUS® DAYS P/N COURSE CODE COST *USD PREREQUISITE 5.0 MQ00230 DSU3084NET $10,970.00 None During this course, the biomedical professional will receive information about the advanced technologies associated with the Primus anesthesia machine. This anesthesia machine incorporates additional ventilation features not found on other anesthesia devices. This course includes instruction on pneumatic systems and components, ventilator and monitoring capabilities, and Preventive Maintenance Inspection procedures (Test Certificate). Canada location only. VAPOR FAMILY DAYS P/N COURSE CODE COST *USD PREREQUISITE 1.0 1902159 DSU3061NET $1,054.00 None This course is designed to introduce the biomedical professional to the distinctive characteristics of both the Dräger Vapor 2000 and 3000. This course will include how to dismount and to mount the components and assemblies according to the maintenance and repair section in ServiceConnect®. The participant will also learn how to do the inspection and output test verification. ZEUS® DAYS P/N COURSE CODE COST *USD PREREQUISITE 7.0 MQ00268 DSU3085NET $13,383.00 *See below (within course description) During this course, the Biomedical professional will receive information about the advanced technologies associated with the Zeus® Anesthesia Workstation. The anesthesia system incorporates additional ventilation features not found on other anesthesia equipment. This course includes instruction on Pneumatic Systems and Components, Ventilator/Absorber Systems, monitoring capabilities, and PMS Inspection Procedures (Test Certificate). Canada location only. *Prerequisite: Basic Knowledge of Medical Technology; Evita 2 Dura/4/XL or Primus seminar (recommended that current service hours for ventilation & anesthesia devices are 50% of workload). Minimum of 8 Zeus IE machines in account. Basic knowledge of hemodynamics monitoring, basic IT knowledge is recommended.
08 |
Ventilation
CARINA®
DAYS P/N COURSE CODE COST *USD PREREQUISITE
1.0 1979851 DSU3215NET $2,043.60 None
Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the
Carina ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and
repair of this device. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.
EVITA® 4 / EVITA® 2 DURA / EVITA® XL
DAYS P/N COURSE CODE COST *USD PREREQUISITE
5.0 1902146 DSU3213NET $3,800.16 None
This course will highlight the built-in diagnosis and upgrading tools of the Evita series. The student will become skilled in identifying assemblies/
sub-assemblies and gain a depth of knowledge and understanding of the functions and basic troubleshooting of these devices. Upon successful
completion of this course, the student will be able to identify and understand the functions of the detachable user interface (Evita 4 / XL), the
integrated interface (Evita 2), and the pneumatic and electrical systems (Evita 4 / 2 / XL). The student will also be able to demonstrate competence
in performing a scheduled Preventive Maintenance Inspection.
EVITA® INFINITY® V500 / BABYLOG® VN500
DAYS P/N COURSE CODE COST *USD PREREQUISITE
5.0 MQ00231 DSU3212NET $3,864.64 None
During this course, students will become skilled in identifying assemblies/subassemblies and enhance their knowledge and understanding of device
functions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identify
and understand the functions of the pneumatic and electrical systems of the V500 and VN500, including the Human Interface Testing (HIT) software and
the optional gas supply unit (GS500). The student will also learn how to perform a scheduled Preventive Maintenance Inspection.
NOTE: A LAPTOP IS NOT REQUIRED DURING THIS SEMINAR. However, working with the V500/VN500 requires the participant to have a laptop computer
to perform troubleshooting and the PMI procedure. The laptop must have the following capabilities: Microsoft® Windows® XP or later/NT SP6, NOT including
Windows Vista® or Windows 7; Adobe® Acrobat® 7.0 or higher; Intel® Pentium® 4 or higher processor with at least 512 MB of RAM; DVD-ROM drive capable of
reading dual-layered DVD’s; access to an email account.
OXYLOG® 3000 / OXYLOG® 3000+
DAYS P/N COURSE CODE COST *USD PREREQUISITE
1.0 1902152 DSU3273NET $2,043.60 None
Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electronic systems of the
Oxylog 3000 ventilator. The student will also be able to perform basic troubleshooting and demonstrate the proper techniques in the disassembly, assembly and
repair of these devices. In addition, the student will learn how to perform the operation verification and complete a scheduled Preventive Maintenance Inspection.
SAVINA®
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
1.0 1902165 DSU3222NET $930.80 Savina 300
This course will highlight the built-in diagnosis and upgrading tools of the Savina. The student will become skilled in identifying assemblies/sub-assemblies and
gain a depth of knowledge and understanding of the device functions through various lecture and hands-on exercises. Upon successful completion of this course,
the student will be able to identify and understand the functions of the operator control panel and the pneumatic and electrical systems. The student will also be
able to complete a Preventive Maintenance Inspection, perform basic troubleshooting and operation verification.
SAVINA® 300
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
3.0 MQ00177 DSU3223NET $3,346.72 None
This course is designed to provide the biomedical professional with specific information related to the Savina 300 operating functions which differ from the Savina
ventilator. Upon successful completion of this course, the student will be able to identify and understand the functions of the pneumatic and electrical systems and
be familiar with the Preventive Maintenance Inspection.| 09 Warming Therapy CLOSED WARMING THERAPY SYSTEMS CLASS DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS) Caleo® 2.0 1902164 DSU3560NET $2,714.40 None Isolette® C2000 & 2.0 1902175 DSU3530NET $2,714.40 None Isolette® 8000 Upon successful completion of any one of these courses, the student will be able to identify and understand the functions of the heating, humidifying, controlling, O2 supply, power supply and monitoring systems. The student will also be able to troubleshoot the equipment and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection. INCUWARMER CLASS DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS) Babyleo® TN500 3.0 1903324 WWDCHT05EN $3995.00 None During this course, students will become skilled in identifying assemblies/sub-assemblies and enhance their knowledge and understanding of device functions. Basic troubleshooting as well as hands-on training will be included. Upon successful completion of this course, students will be able to identify sub-assemblies and understand the functions of the Babyleo TN500, including function on the Open and Closed modes and the Human Interface Testing (HIT) software. The student will also learn how to perform a scheduled Preventive Maintenance Inspection. OPEN WARMING THERAPY SYSTEMS CLASS DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS) Babytherm® 8004/8010 1.0 1902145 DSU3550NET $2,106.00 None Radiant Warmer 1.0 1979824 DSU3540NET $2,106.00 None and Resuscitaire® Birthing Room Warmer Upon successful completion of any one of these courses, the student should be able to identify and understand the functions of the heating, controlling and monitoring systems. The student will also be able to troubleshoot and demonstrate the proper techniques in the disassembly, assembly and repair of these devices. In addition, the student will learn how to implement an upgrade, operational verification and complete a scheduled Preventive Maintenance Inspection.
10 |
Monitoring & HealthCare IT
Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student
for installation or configuration of Dräger’s complex systems. The courses are designed to provide basic information
for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed,
technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.
NETWORK FUNDAMENTALS THEORY
DAYS P/N COURSE CODE COST *USD PREREQUISITE
2.0 1902805 DSU3603NET $1,000.00 None
This seminar introduces the learner to fundamental computer networking concepts and how they’re applied to the Dräger Omega and Omega-S products. This
seminar is the introduction to further study in the Draeger Healthcare field. This seminar is required for networking other Dräger Monitoring and IT products.
A list of the basic networking concepts discussed and applied will be:
–– Networking topologies (wired), their necessary communication protocols, and terminology.
–– TCP/IP network configuration (addressing, subnetting and planning) and how it is applied to integrate with the Infinity Omega and Omega-S.
–– LAN and WAN technologies, and how Infinity Omega and Omega-S solutions integrate with each.
To fully grasp the concepts of networking in regards to the Dräger Omega and Omega-S products it is highly recommended that the student attend this course
regardless of IT skillset.
ADVANCED INFINITY® NETWORKING
DAYS P/N COURSE CODE COST *USD PREREQUISITE
3.0 1902536 DSU3604NET $1,500.00 *See below (within course description)
This seminar continues where the Network Fundamentals Theory seminar left off. It introduces the learner to networking concepts and how they’re applied to the
rest of the Infinity® Monitoring and Healthcare IT product line. The seminar will be a combination of lecture and hands-on learning using the latest networking
appliances and Dräger equipment. Each student will be required to configure multiple devices including, but not limited to, Cisco 2600 series routers, switches
and a host of Draeger Infinity® products.
A list of the basic networking concepts discussed and applied will be:
–– Networking topologies (wireless), their necessary communication protocols, and terminology.
–– LAN and WAN technologies, and how Dräger’s Infinity Monitoring and Healthcare products integrate with each.
–– VLAN planning and application using managed switches and wireless devices.
–– Basic routing concepts using Cisco® devices for configuration and practical application within an Infinity network.
–– The student will also be challenged with a number of hands-on exercises that are centered around troubleshooting, error management and proper network
capacity usage techniques.
To fully grasp the concepts of the Infinity Monitoring and Healthcare IT product line it is highly recommended that the student attend this course regardless of IT
skillset. The methods used to fully configure and integrate a Dräger device onto an Infinity network go beyond basic computer networking and configuration skills.
This Advanced Infinity Networking course curriculum brings these concepts into the forefront of the lectures and hands-on exercises, and thus allowing the student to
become comfortable utilizing these universal concepts in a Dräger specific way.
*Advanced Infinity Networking course prerequisites.
Appropriate IT skills and/or experience needed to attend this class are as follows:
–– IP addressing
–– Network layers (OSI model)
–– Routing
–– Switches and hubs
–– LAN and WAN technologies
–– VLAN design
–– Network diagnostic tools and protocols
–– Port management and configuration
The following vendor-specific IT Certifications can be presented in lieu of not attending this course:
–– Cisco CCNA®
–– Cisco CCNP®| 11 Monitoring & HealthCare IT In order to better support our customer’s scheduling and that we may schedule you appropriately. Those customers travelling limitations, we have realigned the monitoring that select the Omega track do NOT need to take the classes into sequential courses (or tracks) based upon the Advanced Infinity Networking course to join the Infinity common dispositions of Dräger equipment. See the diagram Explorer Basic course, as required for those that are taking below for a clearer picture of these tracks and how they the IACS or Monitors tracks. differ. Please be sure to mention them when scheduling so
12 |
Monitoring & HealthCare IT
Attendance and successful completion of the Monitoring and Healthcare IT training courses does not prepare the student
for installation or configuration of Dräger’s complex systems. The courses are designed to provide basic information
for first call troubleshooting and basic repairs. These systems should be installed by an appropriately appointed,
technically-trained Dräger representative(s), under the guidelines of approved procedures established by Dräger.
INFINITY® ACUTE CARE SYSTEM
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
5.0 MQ00250 DSU3711NET $6,068.40 Advanced Infinity Networking
This seminar is designed to introduce the biomedical professional to the Infinity Acute Care System (IACS) monitoring solution. The content of the seminar
details the following products that make up of the IACS (C500/C700 Medical Cockpit, M540 patient monitor, M500 docking station and P2500 power supply).
This seminar includes product overviews, configuration of the system, testing the operation of the system and communications troubleshooting.
Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures,
detail the options concerning each unit, discuss and perform repair and maintenance for each unit, perform practical operational exercises on each unit
and complete a Preventive Maintenance Inspection.
INFINITY® CENTRALSTATION (VF)
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
3.0 1979823 DSU3642NET $3,640.00 Advanced Infinity Networking
This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity CentralStation
that is running VF software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be able to do the
following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair and maintenance for
each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.
INFINITY® CENTRALSTATION (VG)
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
3.0 1903170 DSU3645NET $3,640.00 Advanced Infinity Networking
This seminar is designed to introduce the biomedical professional to the service-related operations, configuration and physical layout of the Infinity
CentralStation that is running VG software, along with its role within the Infinity network. Upon successful completion of this seminar, the participant will be
able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss and perform repair
and maintenance for each unit, perform practical exercises of operation on each unit and complete a Preventive Maintenance Inspection.
INFINITY® EXPLORER BASIC
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
3.0 MQ00187 DSU3701NET $3,640.00 Advanced Infinity Networking
This seminar is intended to introduce the biomedical professional to the service-related operations, configuration and physical layouts of the Infinity C700
for IT workstation, Infinity Explorer software, and Omega solutions (Omega/Omega-S), along with its role in the Infinity Network. Upon successful completion
of this seminar, the participant will be able to do the following: explain software versions and download procedures, install and configure software, install
Dräger client applications, implement Microsoft® Windows® updates and hotfixes, execute repair and maintenance procedures, perform practical operational
exercises on the unit and complete a Preventive Maintenance Inspection.
INFINITY® GATEWAY
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
2.0 MQ09840 DSU3696NET $2,980.00 Network Fundamentals Theory and
Advanced Infinity Networking
The Infinity Gateway Suite software applications are intended to provide clinicians with the capacity of viewing patient data remotely via the Infinity Network and for
the data exchange of select clinical and administrative information between the Infinity Network and the hospital network.
Upon completion of this 2-day course students will be able to:
– Install Infinity Gateway
– Install Patient Watch
– Detail HL7 and how it relates to Infinity Gateway
– Detail ADT Interfaces
– Detail and use troubleshooting tools associated with the Infinity Gateway Suite| 13
INFINITY® M300 TELEMETRY
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
2.0 1902532 DSU3712NET $2,427.00 Infinity CentralStation
This seminar is intended to introduce the biomedical professional to the Infinity M300 wireless patient monitor and patient-worn telemetry device. This course
includes the programming and care of the Infinity M300 and the configuration of the Infinity CentralStation (ICS) as it pertains to the interaction of the M300
monitor. Upon successful completion of this seminar, the participant will be able to do the following: explain software versions and software download procedures,
detail the options concerning each unit, discuss and perform repair and maintenance, perform practical operational exercises and complete a Preventive
Maintenance Inspection.
INFINITY® MODULAR MONITOR SERIES WITH SCIO®
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
5.0 1902172 DSU3620NET $6,068.40 Advanced Infinity Networking
This seminar is designed to introduce the biomedical professional to the Infinity Delta/Delta XL/Kappa/Gamma XL monitors and the Scio gas module. This
seminar includes instruction on the service-related operation, configuration, and NBP calibration/characterization. Upon successful completion of this seminar,
the participant will be able to do the following: explain software versions and software download procedures, detail the options concerning each unit, discuss
and perform repair and maintenance for each unit, perform practical operational exercises on each unit and complete a Preventive Maintenance Inspection.
INFINITY® SYMPHONY
DAYS P/N COURSE CODE COST *USD PREREQUISITE (WITHIN 3 YEARS)
1.0 1979822 DSU3697NET $1,490.00 Network Fundamentals Theory and
Advanced Infinity Networking
Infinity Symphony Suite is a web-based application that expands your access to valuable patient information stored on the Infinity CentralStation database by
making it available virtually anywhere via the hospital network.
In this 1-day seminar participants will:
– Install Infinity Symphony
– Add users in Symphony
– Configure Symphony with an ICS
– Export Reports14 |
2018 Seminar Dates (Jul-Dec)
Dräger Technical Training
Seminars are subject to date changes or cancellation for low enrollment, please contact Dräger
for confirmation. Email: Draegerservice.Triage@draeger.com or Phone: 800-437-2437, option 4
ANESTHESIA
SEMINAR COURSE CODE DATE LOCATION
Apollo® DSU3081NET Jul 16 - 20 Telford, PA
Apollo® DSU3081NET Aug 20 - 24 Telford, PA
Apollo® DSU3081NET Sep 24 - 28 Telford, PA
Apollo® DSU3081NET Oct 15 - 19 Telford, PA
Apollo® DSU3081NET Nov 12 - 17 Telford, PA
Apollo® DSU3081NET Dec 10 - 14 Telford, PA
Fabius® Family DSU3021NET Jul 9 - 12 Telford, PA
Fabius® Family DSU3021NET Aug 6 - 9 Telford, PA
Fabius® Family DSU3021NET Sep 17 - 20 Telford, PA
Fabius® Family DSU3021NET Oct 8 - 11 Telford, PA
Fabius® Family DSU3021NET Nov 5 - 8 Telford, PA
Fabius® Family DSU3021NET Dec 3 - 6 Telford, PA
Fabius® MRI DSU3022NET Jul 13 Telford, PA
Fabius® MRI DSU3022NET Sep 21 Telford, PA
Fabius® MRI DSU3022NET Nov 9 Telford, PA
Perseus® DSU3087NET Jul 23 - 27 Telford, PA
Perseus® DSU3087NET Sep 10 - 14 Telford, PA
Primus® DSU3084NET Oct 22 - 16 Mississauga, ON
Vapor Family DSU3061NET Aug 10 Telford, PA
Vapor Family DSU3061NET Oct 12 Telford, PA
Vapor Family DSU3061NET Dec 7 Telford, PA
Zeus® DSU3085NET Aug 14 - 24 Mississauga, ON
VENTILATION
SEMINAR COURSE CODE DATE LOCATION
Carina® DSU3215NET Jul 25 Telford, PA
Carina® DSU3215NET Sep 5 Telford, PA
Evita® 4 / Evita® 2 dura / Evita® XL DSU3213NET Nov 12 - 16 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Jul 9 - 13 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Jul 16 - 20 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Jul 30 - Aug 3 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Oct 22 - 26 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Nov 5 - 9 Telford, PA
Evita® Infinity® V500 / Babylog® VN500 DSU3212NET Dec 3 - 7 Telford, PA
Oxylog® 3000 / Oxylog® 3000+ DSU3273NET Jul 26 Telford, PA
Oxylog® 3000 / Oxylog® 3000+ DSU3273NET Sep 6 Telford, PA
Savina® DSU3223NET Dec 11 - 13 Telford, PA
Savina® 300 DSU3222NET Dec 14 Telford, PA
CLOSED WARMING THERAPY SYSTEMS
SEMINAR COURSE CODE DATE LOCATION
Caleo® DSU3560NET Sep 10 - 11 Telford, PA
Isolette® C2000 & Isolette® 8000 DSU3530NET Sep 12 - 13 Telford, PA| 15 2018 Seminar Dates (Jul-Dec) Dräger Technical Training Seminars are subject to date changes or cancellation for low enrollment, please contact Dräger for confirmation. Email: Draegerservice.Triage@draeger.com or Phone: 800-437-2437, option 4 INCUWARMER SEMINAR COURSE CODE DATE LOCATION Babyleo® TN500 DSU3555NET Oct 9 - 11 Telford, PA Babyleo® TN500 DSU3555NET Dec 18 - 20 Telford, PA OPEN WARMING THERAPY SYSTEMS SEMINAR COURSE CODE DATE LOCATION Babytherm® 8004/8010 DSU3550NET Oct 4 Telford, PA Radiant Warmer and Resuscitaire® Birthing Room Warmer DSU3540NET Oct 3 Telford, PA MONITORING & HEALTHCARE IT SEMINAR COURSE CODE DATE LOCATION Network Fundamentals Theory DSU36043NET Jul 9 - 10 Telford, PA Network Fundamentals Theory DSU36043NET Aug 6 - 7 Telford, PA Network Fundamentals Theory DSU36043NET Sep 10 - 11 Telford, PA Network Fundamentals Theory DSU36043NET Oct 1 - 2 Telford, PA Network Fundamentals Theory DSU36043NET Nov 5 - 6 Telford, PA Network Fundamentals Theory DSU36043NET Nov 26 - 27 Telford, PA Advanced Infinity® Networking DSU3604NET Aug 8 - 10 Telford, PA Advanced Infinity® Networking DSU3604NET Sep 12 - 14 Telford, PA Advanced Infinity® Networking DSU3604NET Oct 3 - 5 Telford, PA Advanced Infinity® Networking DSU3604NET Nov 7 - 9 Telford, PA Advanced Infinity® Networking DSU3604NET Nov 28 - 30 Telford, PA Infinity® Modular Monitor Series with SCIO® DSU3620NET Jul 16 - -20 Telford, PA Infinity® Modular Monitor Series with SCIO® DSU3620NET Oct 8 - 12 Telford, PA Infinity® Modular Monitor Series with SCIO® DSU3620NET Dec 3 - 7 Telford, PA Infinity® CentralStation (VG) DSU3645NET Aug 20 - 22 Telford, PA Infinity® CentralStation (VG) DSU3645NET Sep 24 - 26 Telford, PA Infinity® CentralStation (VF) DSU3642NET Oct 15 - 17 Telford, PA Infinity® CentralStation (VF) DSU3642NET Dec 10 - 12 Telford, PA Infinity® M300 Telemetry DSU3712NET Aug 23 - 24 Telford, PA Infinity® M300 Telemetry DSU3712NET Sep 27 - 28 Telford, PA Infinity® M300 Telemetry DSU3712NET Oct 18 - 19 Telford, PA Infinity® M300 Telemetry DSU3712NET Dec 13 - 14 Telford, PA Infinity® Acute Care System Monitoring DSU3711NET Aug 13 - 17 Telford, PA Infinity® Acute Care System Monitoring DSU3711NET Sept 17- 21 Telford, PA Infinity® Acute Care System Monitoring DSU3711NET Nov 12 - 16 Telford, PA Infinity® Explorer Basic DSU3701NET Jul 11 - 13 Telford, PA Infinity® Explorer Basic DSU3701NET Oct 22 - 24 Telford, PA Infinity® Gateway DSU3696NET Sep 5 - 6 Telford, PA Infinity® Symphony DSU3697NET Sep 7 Telford, PA
16 |
Dräger Registration Form
Must be mailed, faxed or emailed to confirm enrollment Page 1 of 2
Fax or email completed form to: (215) 723-5935 or DraegerService.Triage@draeger.com
Name Title
Employer Phone
Address Fax
City Email
State Zip
COURSE SELECTIONS:
SELECTION # 1
Course Title Course Date Course Code
Course Fee USD
SELECTION # 2
Course Title Course Date Course Code
Course Fee USD
SELECTION # 3
Course Title Course Date Course Code
Course Fee USD
SELECTION # 4
Course Title Course Date Course Code
Course Fee USD
Please check here if you have special needs that may affect your participation (a representative will contact you to discuss your request).
REGISTRATION
Seminar space is limited and students are enrolled on a first-come, first-served basis. You may contact our Triage Center to verify course availability.
Please note the duration of each class when selecting your courses as this will determine your length of stay. A letter of confirmation will be sent to
the registrant via U.S. Mail, fax or email to confirm registration. Read this letter carefully. If corrections are needed, contact our Triage Center
immediately. A valid and complete email address required for registration. Please note that personal email addresses (Gmail, Hotmail, Yahoo
etc…) will not be considered as valid for registration. Only those provided by the registrant’s employer will be accepted.
TUITION
Your tuition payment covers the cost of all course materials, instruction, lunch and refreshments. Prices are subject to change without notice.
All travel, expenses and hotel accommodations, including meals outside of Dräger, are the sole responsibility of each registered participant.
Tuition payment MUST be provided at the time of registration.
IMPORTANT: CANCELLATIONS
Cancellations received, in writing, 15 business days prior to the course will not be billed for the seminar. A fee of 50% of the total tuition will be charged
for cancellations less than 15 business days of the scheduled seminar date. Please note that if you do not cancel in writing and do not attend, you are
still responsible for payment. Dräger reserves the right to cancel or change the course dates due to low enrollment or other unforeseen circumstances.
If Dräger cancels a course, you will be provided with a minimum of 15 business day’s notice and the full tuition will be refunded or applied toward any
future course. Cancelled students will be placed on a priority list for the next available course. Dräger cannot be held liable for non-refundable travel
expenses in the event of a course cancellation.
Course instruction will provide the student with confidential and proprietary information of Dräger products. This information shall not be
reproduced, distributed, used or disclosed in whole or in part unless otherwise authorized by Dräger in writing.| 17
Dräger Registration Form
Must be mailed, faxed or emailed to confirm enrollment Page 2 of 2
Fax or email completed form to: (215) 723-5935 or DraegerService.Triage@draeger.com
METHOD OF PAYMENT:
Payment must accompany the registration form in order to process registration.
Purchase Order No. Today’s Date
If included with machine purchase, please list:
Purchase Order No. Sales Order No.
I am enclosing a check – made payable to “Draeger” in the amount of $
Dräger, is authorized to charge the credit card below for my seminar registration fees in the amount on this form
Mastercard Visa Amex
Credit Card Acct No. CSC/CID Code
Expiration Date
Card Holder Email Card Holder Phone
Signature of Card Holder Print Full Name
AUTHORIZATION
Yes, I accept the Dräger Registration, Tuition, and Cancellation policy. The Participant that registers for and attends the
seminar associated with this sales order must be an employee of the purchasing facility and may be required to show proof
of employment. Registration is not transferable.
Student Signature (REQUIRED)
Signature Print Name
Student’s Supervisor Signature (REQUIRED)
Signature Print Name
For Payments and/or inquiries contact
PHONE (800) 437-2437, option 4
FAX (215) 723-5935
WEB www.draeger.com
EMAIL draegerservice.triage@draeger.com
MAIL Draeger, Inc.
3135 Quarry Road · Telford, PA 18969Not all products, features, or services are for sale in all countries.
Mentioned Trademarks are only registered in certain countries and not necessarily in the country
in which this material is released. Go to www.draeger.com/trademarks to find the current status.
CORPORATE HEADQUARTERS
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
www.draeger.com
90 71 402 | 18.05-2 | KB | LL | Subject to modifications | © 2018 Drägerwerk AG & Co. KGaA
Manufacturer: USA
Drägerwerk AG & Co. KGaA Draeger, Inc.
Moislinger Allee 53–55 3135 Quarry Road
23558 Lübeck, Germany Telford, PA 18969-1042
Tel +1 800 4DRAGER
(+1 800 437 2437)
Fax +1 215 723 5935
info.usa@draeger.com
CANADA
Draeger Medical Canada Inc.
2425 Skymark Avenue, Unit 1
Mississauga, Ontario, L4W 4Y6
Locate your Regional Sales Tel +1 905 212 6600
Representative at: Toll-free +1 866 343 2273
www.draeger.com/contact Fax +1 905 212 6601
Canada.support@draeger.comYou can also read
