Bush 19/22/26in LCD TV - Instruction Manual - Please keep for future reference - Q41T2201672 1B
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Instruction Manual - Please keep for future reference
Bush 19/22/26in LCD TV
4-08
Q41T2201672 1BIMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before use and keep for future reference. Read all instruction before use and keep for future reference.
WARNING FOR SAFETY
• Misuse or modification of this appliance may result in breakdown or injury. DO NOT:
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • Attempt to disassemble this unit or carry out repairs.
• Attempt to modify the unit in any way.
• Make sure that foreign objects do not get inside the unit.
IMPORTANT INFORMATION • Place naked flame sources - such as lit candles on or near the unit.
• Place objects filled with liquids - such as vases, on or next to the unit.
• The appliance is intended for household use only.
• Cover the unit - allow the unit to be well ventilated.
• The appliance should always be turned to OFF before plugging or unplugging from socket. Never
• Drop the unit or subject it to strong shocks.
yank cord to disconnect from socket; instead, grasp plug and pull to disconnect.
• Attempt to service this product yourself as opening or removing covers may expose you to
• Check that the voltage on the rating plate of your product corresponds with your local electricity
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
supply which must be A.C. (Alternating Current).
• If the mains sockets in your home are not suitable for the plug supplied with this product, check
with a qualified electrician for replacement.
CHILDREN
• Children do not always understand the dangers associated with operating electrical appliances.
FOR OPTIMUM PERFORMANCE Never allow children to use this appliance.
• Do not use in environments which are extremely hot, cold, dusty or humid.
• Keep the unit free from dust and clean with a dry cloth.
POWER SUPPLY
• Do not use in areas exposed to direct sunlight or where it can become extremely hot.
• Keep away from sources of strong magnetism - such as speakers. • If the unit uses a mains supply, ensure that the plug is securely inserted into the mains socket,
• Avoid placement where there is a lot of movement, vibration or on an unstable surface. and it is easily accessible.
• To reduce the risk of fire or electric shock, the equipment shall not be exposed to rain or moisture • Protect the power lead from sharp objects, excessive heat and damp or wet locations. Check
and objects filled with liquids, such as vases, shall be placed on the apparatus. the power lead periodically, and replace if damaged.
• The equipment shall not be exposed to dripping or splashing. • If the unit uses batteries, please ensure that they are inserted correctly - observing the polarity
• To avoid fire, no naked flame source, such as lit candles, should be placed on or around the unit. (+/-).
• For ventilation, leave at least 10 cm free all around the TV. Do not place the TV on a carpet.
F • Do not mix new and used batteries.
• The ventilation holes must be kept clear from obstructions. • Please make sure that used batteries are disposed of correctly. Do not burn or incinerate.
• In case of smoke, or unusual noises or smells coming from the unit, switch it off, unplug it from • Check that the voltage on the rating plate of your product corresponds with your local electricity
the wall socket and contact your dealer or service center. supply which must be A.C. (Alternating Current).
• Place the TV in such a position that the screen is not exposed to direct sunlight. It is best to have • Any repairs should only be carried out by a fully qualified electrician or an authorised service agent.
soft indirect lighting whilst watching TV. Avoid dark environments and screen reflection as these
may cause eye fatigue.
• When the TV has been moved from a cold place, it will need time for the moisture from inside to LISTENING WITH EARPHONES
evaporate.
• The appliance coupler is used as the disconnect device of this apparatus, the disconnect device • Listen at moderate volumes to avoid hearing damage.
shall remain readily operable. • If you hear no sound during playback, do not turn the volume up as the music may suddenly begin
at a high volume. Excessive sound pressure from earphones and headphones can cause hearing loss.
• The apparatus must be connected to a mains socket outlet with a protected earthed connection.
• To avoid damaging your ears, adjust the volume to the lowest level before playback, and turn up
to the desired level when playback has started.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK), THERE ARE NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
1CONTENTS KNOW YOUR MACHINE
A POWER
B VIDEO 1 x Remote Control
Know Your Machine ......................................................................................... 3
C SCART
Remote Control ................................................................................................ 6
D TV
A
Wall Mounting.................................................................................................... 8 E PC
Antenna Connection ......................................................................................... 10 F Numerical Buttons B D
G EPG C E
Tuning Menu Options ...................................................................................... 11
H PRE PR
Other Connections ............................................................................................13 J ASPECT F
Basic Operation ................................................................................................ 18 K SOURCE
L NICAM G H
Menu Operation ................................................................................................ 22 J L
M SLEEP
Teletext .............................................................................................................. 32 K M
N PICTURE
Common Interface Module ............................................................................... 34 O PR LIST N P
P SOUND O R
Troubleshooting ............................................................................................... 36
Q VOL
Specifications .................................................................................................. 37 R MUTE
Q S
Product Guarantee .......................................................................................... 39 S PR
T DISPLAY
T
U MENU
U V
V EXIT
X OK
Y Navigation Buttons X Y
a Green Button
b Yellow Button a b
d Blue Button e d
e Red Button f h
g k
f MIX
g TELETEXT m p
h SIZE n q
k SUBPAGE
m INDEX
n SUBTITLE
p REVEL/Tick
2
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 q HOLD/VIEW 3KNOW YOUR MACHINE KNOW YOUR MACHINE
1 x LCD TV Front View
A Power LED
Z 1 x AC Power Cord
B Wall Mount Hole
C Volume Up
D Volume Down
E Channel Up
F Channel Down A
G MENU Button
H Source Button
J Power Button
K Common Interface Slot Control Panel Side Connections
L Headphone Output B Rear View
M Video Input
C
N Audio Input
K
O S-Video Input D
P HDMI 2 Input E
Q Antenna Input F L
R SCART Input M
G
S PC Audio Input
N
T SPDIF Output H
U Component Input O
J
V HDMI 1 Input P
X Power Connector
Y VGA Input
Rear Connections
Y
a 2 x AAA Battery
X V U T S R Q
4 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 5REMOTE CONTROL REMOTE CONTROL
3. Carefully close the Battery Cover.
See fig. 3.
NOTES:
- Please read the important safety
instructions before use. fig. 1 PRECAUTIONS: fig. 3
To obtain the best performance
from your remote control, please
REMOTE CONTROL consider the following:
• Ensure there is no obstruction
1. Unclip the Battery Cover from the between remote control and
Remote Control. TV set.
See fig. 1.
• Bright sunlight may affect the
remote control performance.
• Always ensure that both
2. Insert two new 1.5V size AAA batteries are replaced at the
Batteries with the and marks same time.
correctly aligned. Battery
See fig. 2. Compartment
Cover
NOTE ON BATTERIES:
• Do not mix different types of
batteries or an old battery with
a new one. fig. 2
• To prevent the risk of leakage
or explosions, never recharge
the batteries, apply heat or take
them apart.
• When not using batteries,
remove them to prevent battery
drain.
• If liquid leaks from the batteries,
throw them away. Thoroughly
clean the battery compartment
with a dry cloth.
6 7
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105WALL MOUNTING WALL MOUNTING
NOTES:
- Please read the important safety
instructions before use.
3. Use 4 Wall Mount Holes B and
WALL MOUNTING (Optional) Screws (not included) to mount the
TV on the Bracket (not included).
IMPORTANT: When drilling into See fig. 7.
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable fig. 7
fig. 4
for supporting the unit. Consult B
a qualified tradesperson if you
are not sure. Stand Screws
4. For the Wall Bracket - Refer to
the user instructions supplied
NOTE: It would be useful to ask with the wall bracket (not
someone to help you at this fig. 5 included).
stage. See fig. 8.
1. Put the unit face down on a safe, TV Screen VESA-Compatible Screw Type
W Size (inches) Wall bracket
flat surface that is covered by a
H
(W x H mm)
smooth cloth. Stand
See fig. 4 and 5.
19" 100 x 100 mm Metric 4 x 10 mm
22" 100 x 100 mm Metric 4 x 10 mm
26" 200 x 100 mm Metric 4 x 10 mm
2. Unscrew the screws of the stand. fig. 8
Then remove the Stand.
See fig. 4 - 6.
fig. 6
8 9
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105ANTENNA CONNECTION TUNING MENU OPTIONS
TURN ON THE LCD-TV
WARNING:
1. When the POWER J or A is
- Switch off the TV before pressed the TV will turn on and the
connecting any external device. fig. 9
Power LED A on the front of the
TV will change from red to blue
See fig. 10 and 11.
CONNECTING THE ANTENNA
1. Connect the Antenna Plug to the 2. When the LCD-TV is turned off
using the POWER J or A , the J
Antenna Input Q located at the fig. 10
rear of the TV. LCD-TV will go into standby mode
A
See fig. 9. and the Power LED A will turn
red.
2. For optimum picture quality, adjust See fig. 10 and 11. A
the direction of the antenna.
3. To improve picture quality where fig. 11
the signal is poor use a signal
amplifier (not included). X Q FIRST TIME INSTALLATION
1. This display will appear on the
screen when the TV is turned on
for the first time. U
AC POWER CORD CONNECTION See fig. 12.
Y
NOTE: Make sure your local
voltage is 230V/240V~, 50Hz. NOTE: If you can not find this a
screen press MENU U . Then
1. Connect the AC Power Cord Z
use the Natvigation Keys Y to
to the Power Connector X .
select the TV menu.
See fig. 9.
See fig. 11.
2. Connect the AC Power Cord Z
to the mains socket.
2. Press the Green Button a to
See fig. 9. Thank you for your purchase of this TV.
proceed with the installation.
fig. 12
See fig. 11. Please proceed with the following steps to set-up your TV.
Antenna Plug
Mains Socket
Next
Z
10 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 11TUNING MENU OPTIONS OTHER CONNECTIONS
fig. 13 SCART1
WARNING:
3. Use Navigation Keys Y to select - Switch off the TV before
your language. Then press Green Y connecting any external device.
Button a to continue.
See fig. 13 and 14.
a b
SCART INPUT
e
- To connect external devices
such as DVD players, set top
4. Use Navigation Keys Y to select boxes or games consoles. R
your country. Then press Green fig. 17
Button a to continue or press 1. Plug the scart lead from the
Yellow b to go back. external device into TV SCART
See fig. 13 and 15. Socket R .
See fig. 17.
TV Installation 1/3 SCART Lead
English
Language
Espanol 2. SCART 1 - Full SCART, which
Français
Deutsch
transmits RGB, S-Video and CVBS
Italiano
Nederlands
in and CVBS tuner out (Analog).
5. System searching may take few Svenska
minutes to complete.
Dansk
3. Press SCART C or SOURCE K
fig. 14 Next Previous
to select the SCART.
See fig. 16.
See fig. 18. C
TV Installation 2/3
Austria
Country
Belgium
Czech Republic
Denmark
Finland
France
Gemary
Ireland
6. A message will be displayed when Next Previous
the search is complete. Press Red fig. 15
Button e to finish system
searching. The LCD TV will TV Installation 3/3
K fig. 18
automatically display the first System searching. Please wait...
channel found automatically. Analog channels found: 0
See fig. 13. Digital channels found: 0
Exit Next
fig. 16
12 13
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105OTHER CONNECTIONS OTHER CONNECTIONS
YPbPr INPUT U VGA INPUT V Y S
- For connecting devices such as
- You can use your LCD-TV as a
video cameras.
monitor for your personal computer.
1. Make sure that the power of the 1. Connect the D type 15-pin VGA
LCD-TV and the AV device are interface cable (not supplied) to
off. VGA Input Y on the LCD-TV.
See fig. 21.
2. Connect the (Y, Pb, Pr) cables 2. Connect the audio cable (not
and audio cables to the supplied) to Audio Input S on the
fig. 19 fig. 21
Component and Audio Input on back of the LCD-TV (if necessary).
the TV. See fig. 21.
See fig. 19.
3. Press PC E or SOURCE K to
select the PC input.
See fig. 22.
3. Turn on the power of the LCD-TV
first and then turn on the power Pr Pb Y
of the AV device. HDMI to PC
Audio Cables
Cable
4. Press VIDEO B or SOURCE K HDMI 1 INPUT
to select the YPbPr input.
See fig. 20. CAUTION: You must ensure both
devices are switched off before
connection.
1. Connect the cable from the HDMI
B E
devices to the TV HDMI Input V .
See fig. 21.
B
2. Press VIDEO B or SOURCE K
to select the HDMI input.
See fig. 22.
3. Operate the corresponding external K fig. 22
equipment. (Refer to external
equipment operating guide.)
K fig. 20
14 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 15OTHER CONNECTIONS OTHER CONNECTIONS
AV INPUT COMMON INTERFACE SLOT fig. 25
fig. 23
- For connecting an AV device.
- You can use a Conditional Access
1. Make sure that the power of the Module (CAM) card to view Pay
LCD-TV and the AV device are off. TV.
2. Connect the Video cables from the
1. Insert the CAM card (not included)
AV device's output jacks to the
in Common Interface Slot K .
Video Input M .
See fig. 25.
See fig. 23.
3. Connect the Audio cables from the 2. Please refer to the COMMON
AV device's output jacks to the INTERFACE section for more
Audio Input N . detailed information.
See fig. 23. K
3. Turn on the LCD-TV first ; and then
turn on the AV device. HEADPHONE OUTPUT
L
4. Press VIDEO B or SOURCE K M 1. Connect a set of stereo
to select the AV input. headphones (not included) to the
See fig. 24. N Headphone Output L for private
listening. When headphones are
O
S-Video Cable
in use, the speakers will be
automatically disconnected. P
S-VIDEO INPUT See fig. 25.
- For connecting video recorders.
IMPORTANT: When using
1. Make sure that the power of the headphones always set the
LCD-TV and the AV device are off. volume control to a low level
2. Connect the audio and S-Video before you put the headphones
cables from the VCR's output jacks on, then put the headphones
to the S-Video Input O and Audio B on and gradually increase the
Input N . volume to a comfortable
See fig. 23. listening level.
3. Turn on the LCD-TV first and then
turn on the VCR.
HDMI 2 INPUT
4. Press VIDEO B or SOURCE K
to select the S-VIDEO input.
K fig. 24 - Same as HDMI 1.
See fig. 24.
16 17
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105BASIC OPERATION BASIC OPERATION
SELECT SOURCE SOUND
1. Press POWER A to turn on the A 1. Press SOUND P to set the LCD
LCD-TV. Then press TV D , PC TV to a predefined sound setting.
E , SCART C , VIDEO B or B D Off / Rock / Pop / Live / Dance /
SOURCE K to select the source. C E Techno / Classic / Soft.
See fig. 26. See fig. 27.
F
AUDIO CONTROL
SELECT TV CHANNEL H
1. Press VOL+ Q to increase the L
volume or VOL- Q to decrease K 1. You can use the Number Keys F
the volume. A number will on the remote control to directly
appear on screen indicating the select TV channels. Enter the N P
volume level. R channel number you want to
See fig. 26. watch, the keys must be pressed
within 3 seconds of each other.
Q See fig. 27.
S
MUTE
2. Press PR +/- S to select the
1. Press MUTE R to mute the previous or next TV channel.
sound. A mute icon will appear See fig. 27.
on the screen.
See fig. 26. 3. Press PRE PR H to display the
TV channel previously selected.
2. Press MUTE R again or See fig. 27.
VOL+/VOL-to restore the sound.
The mute icon will disappear.
See fig. 26.
PICTURE
NICAM
1. Press PICTURE N to set the LCD
1. Press NICAM L to select MONO,
TV to a predefined picture setting.
STEREO, DUAL 1 and DUAL 2
User / Cinema / Sport / Vivid / Hi-
for ATV channel. Select Audio
bright.
language for DTV channel.
fig. 26
See fig. 27. fig. 27
See fig. 26.
18 19
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105BASIC OPERATION BASIC OPERATION
EPG PICTURE FORMAT
J fig. 29
- Press EPG G to display electronic 1. Press ASPECT J on the remote
program guide in TV mode. control to enter the picture format
See fig. 28. menu.
See fig. 29.
2. Use the Navigation Keys Y to
PR LIST select a picture format and press X Y
OK X to confirm your choice.
- Press PR LIST O to display a G See fig. 29.
list of channels and input - Automatic: DTV and HDMI
sources. M input will automatically display
See fig. 28. the correct format, while ATV
and SCART will need to be set.
O
- Panorama: Removes the black
bars on the side of 4:3
DISPLAY broadcasts with minimal
distortion.
Automatic
- Press DISPLAY T to display the Movie expand 16:9
- 4:3: Displays the classic 4:3
current signal status, including T format.
input source/channel audio mode.
See fig. 28. - Movie expand 14:9: Scales the
classic 4:3 format to 14:9.
X Y - Movie expand 16:9: Scales the
classic 4:3 format to 16:9. Panorama
SLEEP 16:9 subtitle
- 16:9 subtitle: Display 4:3
1. Press SLEEP M to turn the LCD pictures using the full surface of
TV off after a preset time. the screen leaving the subtitles
See fig. 28. visible.
- Wide screen: Stretches the 4:3
2. Use Navigation Keys Y to set the
classic 4:3 format to 16:9.
time (5-180 minutes.)
See fig. 30. Wide screen
See fig. 28.
3. Press OK X to confirm. fig. 30
See fig. 28. fig. 28
Movie expand 14:9
20 21
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105MENU OPERATION MENU OPERATION
OSD SETTING Picture
Settings 5 Picture 9
1. Press MENU G or U to enter the fig. 31 Picture mode Picture Picture mode
OSD setting. There are five items - To set the LCD TV to a predefined Sound Brightness
in the list: Picture, Sound, TV, picture settings. Use Navigation TV
Contrast
Installation
Installation and Parental. fig. 32 Keys Y to toggle between User, Parental
Sharpness
See fig. 31 and 32. Cinema, Sport, Vivid, and Hi-bright. Colour temperature
Noise Reduction
See fig. 34 and 35.
Back light
2. Use Navigation Keys Y to select
Brightness
and press OK X to confirm your
- To brighten the dark parts of the
choice. G
U V picture. fig. 34
See fig. 31 and 32.
X Contrast
Y
3. Press EXIT V to exit the screen. - To sharpen the picture quality.
See fig. 31 and 32.
Colour
- To add or reduce colour.
Sharpness
Picture - To improve detail. fig. 35
- Shows more picture modes and
functions based on your favourite Colour temperature
channels and enables you to - To choose between Normal
adjust the colour and brightness Settings 5 Picture 9
(neutral), Warm (redder), and Cool
setup. Picture Picture mode (bluer).
Sound Brightness
Sound TV Noise reduction
Contrast
- Provides more audio selections. Installation
Sharpness
- To filter out and reduce the image
You can also set the audio
Parental
Colour temperature
noise and improve picture quality.
environment of the LCD TV. Noise Reduction Use Navigation Keys Y to toggle
Back light between Off, Low, Medium, and
TV Strong.
- Enables you to adjust special
functions for country, audio Back light
fig. 33 - To make the background brighter Y
language and the TV channels.
or darker.
Installation
- Enables you to adjust settings Picture format
related to the installation of the TV - To display a list of available display
channels and language. formats. Use Navigation Keys Y
to toggle between Automatic,
Parental Panorama, 4:3, Movie expand 14:
- Enables you to control special 9, Movie expand16:9, 16:9 subtitle
functions for the TV channels. and Wide screen.
22 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 23MENU OPERATION MENU OPERATION
Sound - The following functions are only
Settings 5 Picture 7 available for digital channels with Settings 5 Picture 7
Balance Picture Balance
audio signals. Picture Balance
- To adjust the balance between Sound Bass Sound Bass
Treble Treble
left/right channels.
TV
Volume-visually impaired TV
Installation Virtual surround Installation Virtual surround
See fig. 36 and 37. Parental Sound mode
- To increase or decrease the Parental Sound mode
AVL volume for the visual impaired. AVL
Bass Digital audio out Use Navigation Keys Y to adjust Digital audio out
- To adjust the amount of bass. the volume.
Treble Tip: Before you adjust the
- To adjust the amount of treble. volume, please make sure
fig. 36 fig. 38
Audio description is On.
Virtual surround See fig. 38 and 39.
- To add greater depth and
dimension to the TV sound. Use Hearing impaired
Navigation Keys Y to toggle - To transmit an audio-frequency
between On or Off. for the hearing impaired. Use
fig. 37 Navigation Keys Y to toggle fig. 39
Sound mode between On or Off.
- To set the LCD TV to a
predefined sound setting. Use Audio description
Navigation Keys Y to toggle - To enable or disable the volume-
between Off, Rock, Pop, Live, visually impaired function. Use
Dance, Techno, Classic, and Soft. Navigation Keys Y to toggle
between On or Off.
AVL
- To eliminate the volume
differences between channels
and programs and also reduce
the dynamics of the sound.
Digital audio out
- To select the Digital audio out. Y Y
Use Navigation Keys Y to toggle
between Off, Bit stream and
PCM.
Tip: When Bit stream is
selected, make sure the
amplifier supports digital
audio.
24 25
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105MENU OPERATION MENU OPERATION
TV Analog manual store Settings TV
Settings 5 TV 3 1. Use Navigation Keys Y to select Channels 5 Channel scan
Country Picture Country
Channel scan in the Channels menu. Channel scan
Sound Audio Language
- To select the relevant country. TV Channels 2. Press the Right Navigation Key
Update scan Start
Analogue manuals...
This is the country you are in, Installation Y to enter it and press Navigation Channel skip
or the country whose channels Parental
Keys Y to toggle between Search Channel sort
you want to receive if you live or Fine tune. Channel name edit
near its borders. • Search: to start manual scanning
See fig. 40 and 41. from the specified frequency.
• Fine tune: to fine tune the
Audio language (Digital TV only) program.
fig. 40 fig. 42
- To display a dialogue enabling See fig. 42 and 43.
the preferred language to be set.
This is the language to be used Channel skip
for all channels if it is available. 1. Use Navigation Keys Y to select
Channel skip in the Channels menu.
Channels 2. Press the Right Navigation Key
fig. 41 fig. 43
- Use the Navigation Keys Y to Y to enter it and use Navigation
toggle between Channel scan, Keys Y to highlight the program
Update scan, Analog manual you want to skip and press OK X
store, Channel skip, Channel to confirm.
sort and Channel name edit. Tip: The skipped program may
Channel scan not be found by pressing
1. Use the Navigation Keys Y Navigation Keys Y but can be
to select Channel scan in the accessed by pressing number
Channels menu. buttons directly.
2. Press the Right Navigation • Programs with this are active
Key Y to enter it and press OK • Programs with this are skipped
X to start searching the local Channel sort
program automatically. 1. Use Navigation Keys Y to select
X Y X Y
Update scan Channel sort in the Channels menu.
1. Use Navigation Keys Y to 2. Press the Right Navigation Key
select Channel scan in the Y to enter it and use Navigation
Channels menu. Keys Y to highlight a program you
2. Press the Right Navigation want to sort and press OK X to
Key Y to enter it and press OK select.
X to start searching the local 3. Use Navigation Keys Y to
program automatically. highlight the second program you
want to exchange with and press
OK X to switch.
26 27
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105MENU OPERATION MENU OPERATION
Channel name edit Installation
1. Use Navigation Keys Y to Settings 5 Installation 7
select Channel name edit in the Language Picture Language
Sound Source
Channels menu. - To select the interface language. TV Time setup
2. Press the Right Navigation Key See fig. 46 and 47. Installation Subtitle
Y to enter it and press Navigation X Y Parental Teletext
Source Current software info
Keys Y to highlight the program
- To identify the accessory devices Reset AV settings
you want to edit. a you have connected to the external
3. Press the Red Button e to start
inputs/outputs.
editing program name. e
4. Use Navigation Keys Y to edit Time setup fig. 46
name and use the Right - Use Navigation Keys Y to toggle
Navigation Keys Y to move to between :
the next character. Please refer
to the table below for available fig. 44 • Time zone: to select the time
characters. zone you are in.
5. Press the Green Button a to • Time: to set the time and date fig. 47
confirm. or select auto synchronisation.
See fig. 44 and 45.
Tip: Before setting the time and
Available characters date manually, make sure Auto
Tip: When functions attached
to the Colour Buttons are active _ - . @ 0 1 2 3 4 synchronisation is Off.
or selected, the Colour Buttons 5 6 7 8 9 A B C D E
• Sleep timer: to set the TV to turn
F G H I J K L M N O
are shown on screen. itself off after a set period of time.
P Q R S T U V W X Y
Z a b c d e f g h i
j k l m n o p q r s Subtitle
t u v w x y z - Use Navigation Keys Y to toggle
between :
Available characters • Analog subtitle: to display the
transmitted subtitle on the screen.
0 . @ 0 Y
1 _ - 1 This text can either be permanently
2 A B C a b c 2 displayed (assuming that the
3 D E F d e f 3 service is available with the
4 G H I g H i 4 broadcast) or only when mute is
5 J K L j k l 5
active.
6 M N O m n o 6
7 P Q R S p q r s 7 • Digital subtitle language: to
8 T U V t u v 8 select the teletext language.
9 W X Y Z w x y z 9 • Subtitle type: to choose the
normal type or hearing impaired
fig. 45 type of subtitle.
28 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 29MENU OPERATION MENU OPERATION
Teletext Parental
- Use Navigation Keys Y to toggle Settings 5 Installation 7 Settings 5 Parental 3
between : Picture Language Picture Channel lock
Sound Source Channel lock Sound Program lock
• Digital teletext language: to TV Time setup - To lock a certain TV channel or TV Change PIN
select the teletext language. Installation Subtitle Installation
external source completely.
• Decoding page language: to set Parental Teletext Parental
Current software info See fig. 50.
the teletext language to the Reset AV settings
regional location.
Program lock
See fig. 48 and 49.
- To control access to programs
based on their age ratings. All
Current software info fig. 48 fig. 50
settings apply to digital channels.
- This menu appears with your TV
software information.
Change PIN
- To change your access code. If
Reset AV settings
no PIN-code exists, the menu item
- To reset most of the picture and
fig. 49
is set to Set PIN. Please follow
sound settings to their default
the instructions to set it. If a PIN-
factory levels.
code has been entered previously,
the menu item is set to Change
PIN. Please follow the instructions
to change it. All number
combinations from 0000 to 9999
are valid.
Tip: Remember that 0711 is the
default Change PIN code. If
your access code has been
changed or you have forgotten
the code, you can always get
in by entering the default code.
Y
30 31
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105TELETEXT TELETEXT
TELETEXT HOLD
- (Designed for Europe - Press HOLD q to stop the
PAL/SECAM/DVB-T systems scrolling of pages, press again to
only) continue.
See fig. 52.
TELETEXT
- Press TELETEXT g to activate REVEAL
Teletext. Press again to turn off - Press REVEAL p to display
Teletext. hidden information such as
See fig. 51. answers to a quiz.
MIX R/G/Y/B (Colour button)
- Press MIX f to activate Teletext - Press Colour Buttons a , e , b ,
overlaying the TV picture. and d to select from on screen
options, which have the same
SIZE coloured text.
- Press SIZE h to change the
screen size: Full screen, Top half
and Bottom half.
a b
SUBPAGE
- Press SUBPAGE k to display the e d
sub page (when available) f h
g k
INDEX
- Press INDEX m to return to page m p
100 or the index page; and then
press 0 to 9. The teletext page n q
will be numbered and added to
the page you select or the
secondary item.
SUBTITLE fig. 51 fig. 52
- Press SUBTITLE n to select the
next page marked as a subtitle
page.
32 33
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105COMMON INTERFACE MODULE COMMON INTERFACE MODULE
Common Interface Module 3. Select Common Interface to view Settings
the menu options and information TV 4 Common Interface
Country
- The Common Interface CI Slot on the inserted CI card.
Audio Language Top Up TV
K , is designed to accept the See fig. 57. Channels
Smart Card K
Conditional Access CA Module Common Interface
coupled with a Smart card, in
order to view pay TV programmes
and additional services. Contact
your Common Interface service CA Module fig. 53
provider for further information
about modules and subscription fig. 57
options. Please note that CA
fig. 55
modules and smart cards are not
included, or supplied as optional
extras by us. X
See fig. 53. 4. Press OK X to access the card
fig. 58
menu, for more details refer to
the module's instruction manual.
WARNING: Switch off your TV See fig. 58 - 59. Main menu
before any module is inserted
into the Common Interface slot. Module information
Language
U Software Download
1. Correctly insert the CA Module G
and then the Smart Card into
the CI slot located at the side of
the TV.
Exit OK Cancel
See fig. 53. fig. 54 Press OK to select, or Exit to quit
fig. 59
5. When module is removed, the
2. Turn on the TV and press MENU Settings 5 TV 4
"Common Interface" menu will
G or U and select the TV sub- Settings 5 TV 4 Picture Country
disappear from the screen.
menu. "Common interface" will Picture Country Sound Audio Language
Sound Audio Language See fig. 60. TV Channels
be displayed if the CA module is TV Channels Installation
detected. Wait for few moments Installation Common Interface Parental
until the card is activated. Parental fig. 56
See fig. 54 - 56.
fig. 60
34 35
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105TROUBLESHOOTING SPECIFICATIONS
The following table contains common problems and the solutions to these problems. Screen Size 19" 22" 26"
Please check this list before you contact technicians.
DISPLAY DISPLAY
Aspect Ratio 16:9 16:9 16:9
Problems Sloutions
Resolution 1440 x 900 1680 x 1050 1366 x 768
1. Connect power cord correctly.
2. Turn on power. OSD Language English, German, French, Italian, Spanish, Portuguese, Dutch,
No picture Danish, Finnish, Swedish, Norwegian, Polish, Russian, Greek
3. Connect signal cable correctly.
4. Press any button on the LCD TV. ENHANCEMENT ENHANCEMENT
Abnormal colours Connect signal cable correctly. Sound Output (RMS Watts) 3W 3W 5W
1. Connect signal cable correctly. Sound Mode Rock, Pop, Live, Dance, Techno, Classic, Soft
Twisted picture
2. Please use compatible signal.
Picture Formats Automatic, Panorama, 4:3, Movie expand 14:9,
Adjust brightness and contrast. Movie expand 16:9, 16:9 subtitle, Wide screen
Picture too dark
Audio only, no images
Picture Mode User, Cinema, Sport, Vivid, Hi-bright
1. Please check if input signal is connected correctly.
Audio only, no images CONNECTIONS CONNECTIONS
2. TV-RF signal must not be lower than 50dB.
1. Connect signal cable correctly. Rear Connectors Tuner input (75 )
2. Adjust volume to proper level. SCART 1
Picture only, no audio PC IN :VGA and Audio cable
3. Connect audio signal cable correctly.
4. TV-RF signal must not be lower than 50dB. Component Video and L/R Audio input
SPDIF Output (Digital audio out)
1. Please change battery. AV L/R Audio Output
Cannot use remote control
2. Turn off power for 10 seconds; and then restart power. HDMI 1
Cannot receive sufficient Please use the Channel scan function to increase the number Side Connectors Earphone Output
channels through antenna of channels not included in memory.
AV In (Composite Audio/ Video)
No colours Please adjust the colour setup. S-Video
HDMI 2
1. Check the connection of antenna/signal cable. Common Interface
Blinking picture accompanied by
2. Check if channel is in play mode.
ghost image
3. Press signal source and change input mode. WEIGHT & DIMENSIOIN WEIGHT & DIMENSION
Adjust antenna. Product Dimension 446 mm 512 mm 652 mm
Broken lines or segments Keep the TV away from noise sources, such as vehicles, neon (WxDxH) 359 mm 400 mm 480 mm
lights, and hair dryers. 145 mm 145 mm 220 mm
Certain TV channels are blocked Please use the Update scan method to add the channels not Net Weight 4.0 kg 5.0 kg 8.8 kg
(Hope to acquire some channels) included in memory.
POWER POWER
Overlapping images or ghost Please use multi-directional outdoor antenna. (If your TV is
images Operation (Max.) < 50 W < 55 W < 110 W
subject to the influence of nearby mountains or buildings).
Standby < 1W
Cannot use a function If the item you choose turns grey, that item cannot be selected.
Mains Power AC100-240V AC100-240V AC100-240V
Please use the Update scan method to add the channels not
Cannot receive programs 1.5A 1.5A 1.5A
included in memory.
50-60Hz 50-60Hz 50-60Hz
36 37
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 0105SPECIFICATIONS
Connecting to Power
Check that the voltage marked on the product corresponds with your supply voltage.
This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable
or needs to be replaced, please note the following :
PRODUCT GUARANTEE
Plug Replacement This product is guaranteed against manufacturing defects for a period of
If you need to replace the fitted plug.
WARNING :
Never connect live or neutral wires to the earth terminal of the plug.
Only fit an approved 13 Amp BS1363/A plug and the correct rated fuse.
If in doubt, consult a qualified electrician.
IMPORTANT YELLOW & GREEN
Year
This unit is a Class 1 Appliance and must be fitted (EARTH)
with an Earthed Plug fitted with a 13A fuse.
The wires in this mains lead are coloured as follows: This product is guaranteed for twelve months from the date of original purchase. Any
Yellow & Green-Earth defect that arises due to faulty materials or workmanship will either be replaced,
Blue-Neutral refunded or repaired free of charge where possible during this period by the dealer
Brown-Live BROWN from whom you purchased the unit.
(LIVE)
As the colours of the wires in the mains lead of this BLUE CABLE The guarantee is subject to the following provisions:
(NEUTRAL) GRIP
apparatus may not correspond with the coloured - The guarantee does not cover accidental damage, misuse, cabinet parts, knobs
markings identifying the terminals in your plug, or consumable items.
proceed as follows: - The product must be correctly installed and operated in accordance with the
The wire which is Coloured Yellow & Green must be connected to the terminal instructions contained in this manual.
which is marked E or the earth symbol ( ). The wire which is coloured blue must - It must be used solely for domestic purpose.
be connected to the terminal which is marked with N or coloured blue. The wire - The guarantee will be rendered invalided if the product is re-sold or has been
which is coloured brown must be connected to the terminal which is marked L damaged by inexpert repair.
or coloured brown. Always ensure that the plug cord grip is fastened correctly. - Specifications are subject to change without notice.
If a 13A (BS1363) fused plug is used it must be fitted with a 5A fuse conforming - The manufacturer disclaims any liability for the incidental or consequential damages.
to BS1362 and be ASTA approved. If in doubt contact a qualified electrician. - The guarantee is in addition to, and does not diminish your statutory or legal rights.
- In the event of a problem with the product within the guarantee period call the
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE customer helpline on 0845 604 0105
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK WITH
Guarantor: Argos Ltd
YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
38
BUSH HD Ready Digital LCDTV User Manual Customer Helpline 0845 604 010519/22/26 LCD TV QUICK START GUIDE 1
CAUTION: We recommend you read 4 - FIRST TIME INSTALLATION
the Full Instructions before using
the Quick Start Guide to ensure fig. 1 Thank you for your purchase of this TV.
the correct set up of your LCD 1. This display will appear on the
fig. 4
TV. Incorrect settings or fitting 2 x size AAA 1.5V screen when the TV is turned on Please proceed with the following steps to set-up your TV.
could cause problems or be for the first time.
dangerous. If you encounter a See fig. 4. Next
problem when setting up, please
refer to the user manual before 2. Press the Green Button on the
calling the Customer Helpline remote control to proceed with
0845 604 0105. the installation.
See fig. 5.
1 - INSERT BATTERIES INTO fig. 5
YOUR REMOTE CONTROL 3. Use the Up or Down Navigation
Buttons to select your language.
1. Insert two new 1.5V size AAA Then press the Green Button to
batteries with the and marks continue.
correctly aligned into the Remote See fig. 5 and 6.
Control. TV Installation 1/3
See fig. 1. 4. Use the Up or Down Navigation Language
English
Espanol
Buttons to select your country. Français
Deutsch
Then press the Green Button to Italiano
2 - CONNECTING THE ANTENNA continue or the Yellow Button to
Nederlands
fig. 2 Svenska
Dansk
fig. 6
go back.
1. Connect the Antenna Plug to the Next Previous
See fig. 7.
Antenna Socket located at the
rear of the TV.
5. System searching may take few TV Installation 2/3
See fig. 2.
minutes to complete. Country Austria
Belgium
See fig. 8. Czech Republic
Denmark
3 - AC POWER CORD Finland
France
CONNECTION NOTE: If you can not find this Gemary fig. 7
Ireland
NOTE: Make sure your local screen, press MENU on the Next Previous
voltage is 230V, 50Hz. remote control. Then use the
Navigation Buttons to select the TV Installation
1. Connect the AC Power Cord to Antenna Plug TV menu.
the mains socket. Mains Socket System searching. Please wait...
See fig. 5.
See fig. 2. Analog channels found:
Digital channels found:
0
0
fig. 8
2. Press the Power Button to turn on
the TV. fig. 3 Exit Next
See fig. 3.
BUSH HD Ready Digital LCDTV QSG Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV QSG Customer Helpline 0845 604 010519/22/26 LCD TV QUICK START GUIDE 2
HDMI 1 VGA SCART1 COMMON INTERFACE SLOT fig. 10
5 - CONNECTING OTHER DEVICES
- You can use a Conditional Access
YPbPr Module (CAM) card to view Pay Common
fig. 9 TV. Interface
WARNING: See fig. 10. Slot
- Switch off the TV before
connecting any external device. HEADPHONE OUTPUT Headphone
- Connect a set of stereo Video In
headphones (not included) to the Audio In
SCART INPUT Headphone Output for private
- To connect external devices such listening. S-Video In
as DVD players, set top boxes or See fig. 10. S-Video Cable HDMI 2
games consoles. Rear Panel
See fig. 9.
AV INPUT HDMI Cable
- For connecting an AV device. Side Panel
See fig. 10.
YPbPr INPUT
- For connecting devices such as
video cameras. S-VIDEO INPUT
See fig. 9. SCART Lead - For connecting video recorders.
See fig. 10.
HDMI to PC
Cable HDMI INPUT
VGA INPUT - To connect external devices such
- You can use your LCD-TV as a as Blu-ray disc players or HD
monitor for your personal computer. games consoles.
Stand fig. 11
See fig. 9. See fig. 10.
Screws
HDMI INPUT Wall Mounting (Optional)
- To connect external devices such
as Blu-ray disc players or HD 1. Unscrew the stand screws. Then
games consoles. remove the Stand.
See fig. 9. See fig. 11.
Y Pb Pr Audio Cables
2. Fix the TV to the wall mounting
CAUTION: You must ensure both
bracket (not supplied), using the
devices are switched off before
stand fixing holes.
connection.
See fig. 12. fig. 12
Screw Holes
BUSH HD Ready Digital LCDTV QSG Customer Helpline 0845 604 0105 BUSH HD Ready Digital LCDTV QSG Customer Helpline 0845 604 0105
Q41T780067213BYou can also read
