8-Cube Organizer - assembly instructions - style 4274 4280 4291 dpci - Webcollage.net
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
8-Cube Organizer style dpci finish 4274 002-11-0793 Avington 4280 002-11-0794 White 4291 002-11-0796 Weathered Gray >> assembly instructions
Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck—though we’re confident you won’t need it. before you begin 1. Check for damaged or missing parts. Call 1-800-874-0008 to order missing supplies. 2. Use the carton as a working surface to prevent product damage during assembly. 3. Gather all tools prior to assembly. tools needed supplied 2
table of contents introduction 2 hardware 4 parts list 5 safety precautions 6 installing L-bracket 7 assembly 8-12 additional accessories 13 weight capacity/care instructions 14 QUESTIONS? Just call 1-800-874-0008 for parts and service. For faster service, have the style number and DPCI number ready when calling. 3
hardware (H1) x 22 pre-glued dowel (H2) x 8 hex screw (H3) x 2 (H4) x 2 (H5) x 2 L-bracket screw wall screw L-bracket #10 x 1/2” #10 x 1-1/2” 4
ITEM DESCRIPTION QUANTITY A side panel 2 B B top/ bottom panel 2 C divider 4 C D fixed shelf 3 D C A A D C D C B 5
safety precautions warning • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur. • Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. • Do not overload unit. If any shelf, top, or bottom of unit bows or bends, it is overloaded. The shelf, top, or bottom could collapse and cause serious bodily injury and/or damage to personal belongings. • Do not climb or step on the unit. This is not a bench. The unit may become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. • Do not use this unit as a television stand. Serious bodily injury and/or damage to personal belongings may occur. • Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip. Serious bodily injury and/or damage to personal belongings may occur. • Do not stack units. Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or damage to personal belongings. • Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings, and/or damage to the wall may occur. • All units must be secured individually to wall stud using hardware provided. If wall stud is not accessible, consult your local hardware store for appropriate mounting hardware. Failure to do so may create an unsafe tipping hazard that could lead to serious bodily injury and/or damage to personal belongings. • Follow proper safety procedures if using power tools and ladders. • We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc. • We recommend you hand-tighten screws. Use care not to overtighten if using power tools. 6
installing L-bracket There are several "key points" to L- bracket installation. Please Secure L-bracket on the inside of panel B. See step 5 review the drawings and for detailed installation instructions. comments at right as well as the assembly steps provided. panel B All units must be fastened to the wall. Always mount L-bracket to a wall- stud. The L-bracket is intended to be installed on panel B. panel A WARNING wall stud Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: - Install tip-over restraint provided. - Unless specifically designed to accommodate, Install the screw hole end of L-bracket against do not set TVs or other heavy objects on top of this product. at least one wall stud; horizontal adjustable end - Never allow children to climb or hang on against unit. L-bracket must be mounted no more drawers, doors, or shelves. than 1 1/2 inches from edge of panel. - Place heavy items on lower shelves and as far back as possible. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. This is a permanent label. Do not attempt to remove. 7
step 1. (H1) (H1) (H1) 22x (H1) D (H1) (H1) (H1) D (H1) (H1) (H1) (H1) D (H1) (H1) C (H1) (H1) (H1) (H1) (H1) (H1) C C (H1) (H1) (H1) x 22 (H1) pre-glued dowel C (H1) 1. Arrange dividers (C) and fixed shelves (D) as shown. 2. Quickly dip pre-glued dowels into a cup of water, making sure entire dowel gets wet. 3. Immediately push dowels into holes on unfinished edges of each panel. Three dividers will only have two dowels on one side. 8
step 2. C C D C C D D C C D 1. Align dowels on dividers (C) with center holes on fixed shelves (D) as shown. 2. Push dividers into place. Dowels in divider (C) should interlock with divider (C) on other side of fixed shelf (D). 9
step 3. B C C B C D C D C D B 1. Align dowels on dividers (C) with center holes on both top/bottom panels (B). 2. Push top/bottom panels into place. 10
step 4. 8x A C B (H2) C D C D C D A B (H2) x 8 hex screw 1. Align center holes in each side panel (A) with dowels in fixed shelves (D). 2. Secure side panels (A) to both top/bottom panels (B) using four hex screws for each panel. Tighten screws using supplied hex wrench. 11
step 5. warning All units MUST be fastened to the wall. panel B 1 in. 1 2 MAX wall stud (H4) panel A (H3) (H3) x 2 (H4) x 2 (H5) x 2 L-bracket screw wall screw L-bracket #10 x 1/2” #10 x 1-1/2” 1. Align side of unit with wall stud. 2. Place small hole end of L-bracket against wall/wall stud. Use 1-1/2” screw to secure L-bracket to wall. 3. Use 1/2” screw to secure L-bracket to panel B. L-bracket must be mounted no more than 1 1/2 inches from edge of panel. 12
additional accessories - purchased separately USE 2 SETS WITH ORIENTATIONS SHOWN BELOW CASTERS DO NOT USE WITH ORIENTATIONS SHOWN BELOW USE 3 SETS WITH ORIENTATIONS SHOWN BELOW USE 2 SETS WITH ORIENTATIONS SHOWN BELOW FEET USE 3 SETS WITH ORIENTATIONS SHOWN BELOW 13
weight capacity/care instructions 50 lbs. warning This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive "sagging" of the top or shelves. Extreme overloading can cause failure of the unit and possible injury. 30 lbs. 30 lbs. Care Instructions: Dust with a clean, lint-free dry cloth. 105 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 30 lbs. 14
15
© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
You can also read