2018 GUIDE REFERENCE - Mopar
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
2018 CHARGER QUICK REFERENCE GUIDE
VEHICLE USER GUIDE — IF PASSIVE ENTRY
EQUIPPED
Vehicle User Guide NOTE: Keyless Enter-N-Go — Passive
Vehicle User Guide features are not available while
Access your Owner’s Information – right through the vehicle is moving. If you try to access while the Entry
your Uconnect 4C or 4C NAV touchscreen radio — vehicle is in motion, the system displays: Feature The Keyless Enter-N-Go system is an enhance-
If Equipped. not available while the vehicle is in motion.
ment to the vehicle’s key fob. This feature allows
To access the Vehicle User Guide on your Pre-Installed Features you to lock and unlock the vehicle’s door(s) and
Uconnect Touchscreen: Push the Uconnect Apps • Your User • Available when trunk without having to press the key fob lock or
button, then push the Vehicle User Guide icon on Guide — Updated and where you unlock buttons.
your touchscreen. No Uconnect registration is in real-time need it
required. • Touchscreen • Customizable To Unlock From The Driver Or
convenience interface Passenger Side
• Maintenance • Multilingual
schedules and
information
• Comprehensive
icon & symbol
glossary
NOTE:
Vehicle User Guide Touchscreen Icon Uconnect screen images are for illustration pur-
poses only and may not reflect exact software for
your vehicle.
Lift The Door Handle To Unlock
With a valid key fob located outside the vehicle NOTE:
and within 5 ft (1.5 m) of the driver or passenger • If “Unlock All Doors 1st Press” is programmed,
side door handle, lift either front door handle to all doors will unlock when you grab hold of the
unlock the door automatically. front driver's door handle.
• If a key fob is detected in the vehicle when
To Lock The Vehicle locking the vehicle using the power door lock
Both front door handles have buttons located on switch, the doors will unlock and the horn will
chirp three times. On the third attempt, your
the outside of the handle. With one of the vehicle's
key fob can be locked inside the vehicle.
key fobs located outside the vehicle and within 5 ft
(1.5 m) of the driver's or passenger front door • After pushing the button, you must wait two
Push The Door Handle Passive Entry Button seconds before you can lock or unlock the
handle, push the door handle button to lock all
To Lock vehicle using the door handle. This is done to
four doors and trunk.
allow you to check if the vehicle is locked by
Do NOT grab the door handle when pushing the pulling the door handle without the vehicle
lock button. This could unlock the door(s). reacting and unlocking.
• If a Keyless Enter-N-Go — Passive Entry door
handle has not been used for 72 hours, the
Keyless Enter-N-Go — Passive Entry feature for
that handle may time out. Pulling the deacti-
vated front door handle will reactivate the door
handle's Keyless Enter-N-Go — Passive Entry
feature.
Do NOT Grab The Handle When Locking
INSTRUMENT CLUSTER
D I S P L AY
To Enter The Trunk Whenever the vehicle is unlocked, you can enter Cluster Display
the trunk by pushing the button on the right side of
the applique. The instrument cluster display features a driver
interactive display that is located in the instru-
For further information, and applicable warnings
ment cluster. Pushing the controls on the left side
and cautions, please refer to the Owner’s Manual
at www.mopar.com/en-us/care/owners-manual.html of the steering wheel allows the driver to select
(U.S. Residents) or www.owners.mopar.ca (Cana- Vehicle Information and Personal Settings.
dian Residents).
Trunk Passive Entry Button
With a valid key fob located outside the vehicle
and within 5 ft (1.5 m) of the trunk, push the
button on the right side of applique which is
located on the trunk. Instrument Cluster Display Controls
PHONE PAIRING
• Push the up arrow button to scroll upward Compass Calibration Pairing Procedure
through the main menus (Speedometer, Ve-
This compass is self-calibrating, which eliminates Mobile phone pairing is the process of establishing a
hicle Info, Performance Pages – SRT only,
the need to set the compass manually. When the wireless connection between a cellular phone and
Driver Assist, Fuel Economy, Trip, Audio, Mes-
vehicle is new, the compass may appear erratic, the Uconnect system.
sages, Screen Setup) and sub menus.
and the cluster will display dashes (- -) until the
• Push the down arrow button to scroll downward Start Pairing Procedure On The Radio
compass is calibrated.
through the main menus and sub menus. Uconnect 4 With 7-inch Display
You may also calibrate the compass by completing
• Push the right arrow button to scroll forward to one or more 360 degree turns (in an area free from
the next menu or sub menu. large metal or metallic objects) until the dashes
• Push the left arrow button to scroll back to a (- -) displayed in the cluster turn off. The compass
previous menu or sub menu. will now function normally.
• Push the OK button to access/select the infor- For further information, and applicable warnings
mation screens, the submenu screens of a and cautions, please refer to the Owner’s Manual
main menu item, or to select a personal setting at www.mopar.com/en-us/care/owners-manual.html
in the setup menu. Push and hold the OK (U.S. Residents) or www.owners.mopar.ca (Cana-
button for two seconds to reset displayed/ dian Residents).
selected features that can be reset. Uconnect 4 With 7-Inch Display
1. Place the ignition in the ACC or ON position.
2. Press the “Phone” button.
3. Select “Settings.”
4. Select “Paired Phones.”
5. Select “Add device.”
• Uconnect Phone will display an “In progress”
screen while the system is connecting.
Uconnect 4C & 4C NAV With 8.4-inch Display Pair Your iPhone: 3. When your mobile phone finds the Uconnect
system, select “Uconnect”.
Complete The iPhone Pairing Procedure:
Uconnect 4C & 4C NAV With 8.4-Inch Display
1. Place the ignition in the ACC or ON position.
Pairing Request
2. Press the “Phone” button in the Menu Bar on Bluetooth On/Uconnect Device
the touchscreen. 1. When prompted on the mobile phone, accept
To search for available devices on your Bluetooth the connection request from Uconnect Phone.
3. Select “Pairing.”
enabled iPhone:
4. Select “Paired Phones And Audio Devices.” NOTE:
1. Press the Settings button. Some mobile phones will require you to enter the
5. Select “Add Device.” PIN number.
2. Select Bluetooth.
• Uconnect Phone will display an “In progress”
screen while the system is connecting. • Ensure the Bluetooth feature is enabled.
Once enabled, the mobile phone will begin
to search for Bluetooth connections.
Pair Your Android Device: 5. Once your mobile phone finds the Uconnect 1. Confirm the passkey shown on the mobile
system, select “Uconnect”. phone matches the passkey shown on the
Uconnect system then accept the Bluetooth
• You may be prompted by your mobile phone
pairing request.
to download the phonebook, check “Do Not
Ask Again” to automatically download the NOTE:
phonebook. This is so you can make calls by Some mobile phones require the PIN to be en-
saying the name of your contact. tered manually, enter the PIN number shown on
the Uconnect screen.
Complete The Android Pairing Procedure:
NOTE:
Software updates on your phone or the Uconnect
system may interfere with the Bluetooth connec-
Uconnect Device tion. If this happens, simply repeat the pairing
process. However, first, make sure to delete the
To search for available devices on your Bluetooth
device from the list of phones on your Uconnect
enabled Android Device:
system. Next, be sure to remove Uconnect from
1. Push the Menu button. the list of devices in your phone’s Bluetooth set-
2. Select Settings. tings.
3. Select Connections. For further information on Uconnect Phone,
please refer to “Uconnect Phone” in the vehicle’s
4. Turn Bluetooth setting to “On.” User Guide.
• Ensure the Bluetooth feature is enabled.
Once enabled, the mobile phone will begin
Pairing Request
to search for Bluetooth connections.
LIGHTS SPEED CONTROL
Automatic High Beam — If Adaptive Cruise Control (ACC) —
Equipped If Equipped
This system automatically controls the operation If your vehicle is equipped with Adaptive Cruise
of the headlamp high beams as oncoming vehicles Control, the controls operate exactly the same as
approach. the standard cruise control, with one difference.
• The Automatic High Beam Headlamp Control can You can set a specified distance you would like to
be turned on or off using the Uconnect System. maintain between you and the vehicle in front of
• Push the turn signal lever away from you. you.
• With the headlight switch in the “AUTO” posi- • If the ACC sensor detects a vehicle ahead, ACC
tion, the high beams are controlled automatically. will apply limited braking or acceleration auto-
• Pull the turn signal lever toward you to manu- matically to maintain a preset following dis-
ally deactivate the system. tance while matching the speed of the vehicle
ahead. Adaptive Cruise Switches
• To improve system recognition of crossing traf-
fic, and to limit use in a residential area, the NOTE: 1 — Adaptive Cruise Control (ACC) On/Off
vehicle must be moving at a speed greater than Your vehicle will not exceed the cruise speed you 2 — Distance Setting – Decrease
20 mph (32 km/h) before the Automatic High have set. 3 — Distance Setting – Increase
Beam Module (AHBM) begins requesting high
beam activation. • If the sensor does not detect a vehicle directly
ahead of you, it functions like a standard cruise For further information, and applicable warnings
NOTE: control system, maintaining the speed you set. and cautions, please refer to the Owner’s Manual
If the windshield or Automatic High Beam Head-
at www.mopar.com/en-us/care/owners-manual.html
lamp Control mirror is replaced, the mirror must
(U.S. Residents) or www.owners.mopar.ca (Cana-
be re-aimed to ensure proper performance. See a
dian Residents).
local authorized dealer.
S A F E T Y F E AT U R E S
LaneSense — If Equipped into the steering wheel at any time. When only a Forward Collision Warning With
single lane marking is detected and the driver
The LaneSense system is operational at speeds unintentionally drifts across the lane marking (no Mitigation — If Equipped
above 37 mph (60 km/h) and below 112 mph turn signal applied), the LaneSense system pro- The Forward Collision Warning (FCW) system can
(180 km/h). The LaneSense system uses a forward vides a visual warning through the instrument provide the driver with active braking, audible and
looking camera to detect lane markings and mea- cluster display to prompt the driver to remain visual warnings (within the instrument cluster dis-
sure vehicle position within the lane boundaries. within the lane. When only a single lane marking is play) and may apply a brake jerk to warn the driver
detected, a haptic (torque) warning will not be when it detects a potential frontal collision. The
Turning LaneSense On Or Off provided. warnings and limited braking are intended to pro-
The default status of LaneSense is “off”. The NOTE: vide the driver with enough time to react and avoid
LaneSense button is located on the center stack. The LaneSense system can be customized and or mitigate the potential collision.
LaneSense Warning Message turned off through the Uconnect System touch- The system status can be selected to: “Off”, “Only
screen. Warning”, and “Warning & Braking”. “Warning &
The LaneSense system will indicate the current
For further information, and applicable warnings Braking” status with “Medium” sensitivity are the
lane drift condition through the instrument cluster
and cautions, please refer to the Owner’s Manual default settings, but can be changed within the
display. The instrument cluster display will pro-
at www.mopar.com/en-us/care/owners-manual.html Uconnect settings under “Safety and Driving As-
vide a visual warning depicting the unintentional sistance”.
(U.S. Residents) or www.owners.mopar.ca (Cana-
lane departure.
dian Residents). FCW monitors the information from the forward-
When both lane markings are detected and the looking sensor, as well as the Electronic Stability
driver unintentionally drifts out of the lane (no turn Control (ESC) system and wheel speed sensors, to
signal applied), the LaneSense system provides a calculate the probability of a collision. When the
haptic warning in the form of torque applied to the system determines that a collision is probable, a
steering wheel to prompt the driver to remain warning message (both audible and visual) will be
within the lane boundaries. The driver may manu- displayed within the cluster display along with a
ally override the haptic warning by applying torque brake jerk warning (previously enabled in the
S TA R T I N G A N D O P E R AT I N G
Uconnect Settings). When the system senses the SRT Vehicles • Adjustable Modes - your vehicle is equipped
driver applying the brakes to avoid a probable col- with selectable driving modes: Default (Street),
lision, additional brake force will be provided to the Chassis Sport, Track, Custom, ECO, and Valet.
vehicle. When the system determines a collision • Wheels - due to the high performance nature of • Three-Season Tires - This vehicle may be
with the vehicle in front of you is no longer prob- the brake system, the wheels will get coated equipped with three-season tires to enhance
able, the warning message will be deactivated. with brake dust. It is recommended that performance. FCA US LLC does not recom-
NOTE: Mopar® Wheel Cleaner be used on your wheels mend use of these tires when temperatures are
to avoid any possible damage to the finish. below 40°F (4°C) or in snow/ice conditions.
The FCW feature can be customized and turned
However, do not use wheel cleaner if your
off through the Uconnect System touchscreen. Powertrain & Drivetrain
vehicle is equipped with Dark Vapor or Black
For further information, and applicable warnings Satin Chrome wheels, which must only be • Engine & Transmission (SRT Engine Break-In
and cautions, please refer to the Owner’s Manual cleaned with mild soap, water, and a soft cloth. Recommendations) - The following tips will be
at www.mopar.com/en-us/care/owners-manual.html helpful in obtaining optimum performance and
NOTE:
(U.S. Residents) or www.owners.mopar.ca (Cana- maximum durability for your new SRT Vehicle.
Due to the high performance nature of the brakes
dian Residents). Despite modern technology and World Class
on your SRT, vehicle dust and some noise are
expected and normal. manufacturing methods, the moving parts of
the vehicle must still wear in with each other.
• Tire Service Kit - your vehicle comes with a tire
inflator kit; there is no spare tire included in This wearing in occurs mainly during the first
your vehicle. 500 miles (805 km) and continues through the
first oil change interval For complete break-in
• Trailer Tow - Trailer towing with your SRT ve-
driving procedure, refer to the Owner’s Manual.
hicle is not recommended.
• ESC (Electronic Stability Control) - your vehicle NOTE:
is equipped with selectable ESC modes. The Check engine oil with every refueling and add if
ESC mode selected will alter the handling char- necessary. Oil and fuel consumption may be
acteristics of your vehicle. higher through the first oil change interval.• Engine Oil - 0W-40 Full Synthetic Engine Oil help control tire spin for maximum accelera- • Caution should be taken when driving through
recommended. tion. The launch RPM is also selectable water or snow more than 4 inches (100 mm)
• Fuel - for optimum performance, Premium through the race options screens. Launch Con- deep to avoid any potential for damage to your
Fuel with a minimum octane rating of 91 Pump trol is not available for the first 500 miles vehicle.
Octane Number (97 RON) is recommended. (805 km) of vehicle life.
Electrical
Transmission: Body & Exterior • Your vehicle may be equipped with a premium
• Fascias and Ground Effects - This vehicle has a “harman/kardon” sound system. Your audio
• Applying the brake and throttle pedals at the
unique exterior appearance, which includes mode can be configured using the radio.
same time, also known as “brake torquing”, for
an extended period of time will illuminate the SRT unique fascias and ground effects. These • Your vehicle is equipped with SRT performance
ETC fault light requiring the dealership to clear. exterior components define the style and ap- pages, Drive Modes, Performance Shift Indica-
pearance of your new vehicle. They also cause a tion, Launch Control, and Valet Mode, which
• The vehicle may be equipped with steering are displayed in the instrument cluster and the
lower approach angle in the front of the vehicle
wheel mounted “Paddle Shifters” and an M radio.
and reduced ground clearance. Due to lower
gate console shifter. When in the M gate the
ground clearance, driving your vehicle up steep • Valet Mode is offered on all SRT vehicles. The
vehicle will not shift at red line and must be
manual shifted with either the paddle shifters driveways, approach ramps, or near parking driver can activate and deactivate Valet Model
or the console shifter. In the M gate, the shift blocks may cause damage to the front fascia with a four-digit PIN they create. Custom PIN’s
light can be programed to assist the driver with and ground effects. are created with each use. If you forget your
optimal shift points. • If your vehicle is equipped with a SATIN FIN- PIN, disconnect the battery for five minutes to
reset.
Launch Control: ISH Exterior Body Paint: Use products made
specifically for satin paint, such as Swissvax • Your vehicle may be equipped with a Red key
• Your car may be equipped with Launch Control Opaque Satin Paint Wax and Dr. Beasley’s fob, in addition to the Black key fob. The Red
to improve acceleration performance. It is acti- Satin Paint and Sealant. Reference Satin Fin- key is the only key that can unlock the full
vated by pressing the LAUNCH button, located ish Tips Card. horsepower and torque potential of the SRT
in the instrument panel switch bank, as well as Hellcat engine, while the Black key fob limits
in the radio within “Race Options”, and will the driver to reduced engine output and reduc-SIRIUSXM GUARDIAN — IF
EQUIPPED
tion of transmission shift schedules. In addi- Activation
tion, the Red key fob will unlock all the options
within Drive Modes. The Black key fob will limit To use SiriusXM Guardian emergency, remote and
your options within Drive Modes. security services, you must activate your SiriusXM
• Your vehicle offers an ECO mode. ECO mode Guardian account.
will change the feel of the throttle response and 1. Press the Apps icon on the bottom of your
shift patterns. Please see the Owner’s Manual in-vehicle touchscreen.
for further information on configuration that are
automatically adjusted. 2. Select the “Activate Services” icon from your
list of apps.
For further information, and applicable warnings
and cautions, please refer to the Owner’s Manual 3. Select “Customer Care” to speak with a
at www.mopar.com/en-us/care/owners-manual.html SiriusXM Guardian Customer Care agent who
(U.S. Residents) or www.owners.mopar.ca (Cana- will activate services in your vehicle, or select
dian Residents). “Enter Email” to activate on the web.
Mobile App
Once you have activated your services, you’re only
a few steps away from using remote services. To use SiriusXM Guardian remote services, down-
load the Uconnect Mobile app:
• Once downloaded, use your Owner Account
login and password to open the app.
• Include similar language: You will use your
SiriusXM Guardian PIN to execute these re-
mote services.• Press the “Location” button on the bottom Features Remote Services
menu bar of the app to bring up a map to locate
SiriusXM Guardian helps you activate features
your vehicle or send a location to your SiriusXM Guardian keeps you connected to your
from a distance. The remote services are:
Uconnect Navigation, if equipped. vehicle. You have access to safety, remote and
• Press the “Settings” side menu in the upper security services. • Vehicle Finder helps you find where you parked
left corner of the app to bring up app settings your car.
In-Vehicle Features
and access the Assist Call Centers. • Send & Go allows you to send preset destina-
SiriusXM Guardian enhances your ownership and tions to your navigation system for easy access
For further information: driving experience by connecting your vehicle to on the go.
• U.S. residents visit: siriusxm.com/guardian an operable network. When connected to an oper-
• Remote Door Lock/Unlock lets you unlock or
• Canadian residents visit: siriusxm.ca/guardian/ able network, you have access to:
lock your doors from any distance.
• SOS Call: Connect to a live agent who contact • Remote Horn & Lights allows you to sounds
emergency services and stays on the line with your horn and flash your lights to easily find
you until help arrives. your car.
• Customer Care Assistance: Speak with a live • Receive monthly Vehicle Health Reports, and
agent when you press the ASSIST button on Alerts whenever a problem is detected under
your rearview mirror to get Roadside Assistance the hood.
or support.Security Services Vehicle Finder And Send & Go Send & Go
The Uconnect Mobile App helps you activate fea- Send & Go allows you to search for a destination
Two of the most convenient remote features of the
tures from a distance. The remote services are: on your mobile device and then send the route to
Uconnect Mobile App are Vehicle Finder and
• Receive text or email notifications if your vehi- your vehicle’s built-in navigation system. To send a
Send & Go.
cle's security alarm goes off. navigation route to your vehicle:
Vehicle Finder
• Receive stolen vehicle assistance, using GPS 1. Press the “Location” tab on the Uconnect
technology to help authorities locate your ve- Vehicle Finder allows you to find the location of Mobile App bottom bar.
hicle if it is stolen. your vehicle when you have lost it. You can also 2. Either type in the destination you would like to
sound the alarm and flash the lights to make navigate to, or search through one of the cat-
SiriusXM Guardian remote services can be used finding your vehicle even easier. To find your
with the Uconnect app from virtually anywhere. egories provided.
vehicle:
For further information on SiriusXM Guardian or 3. Select the destination you want to route to
1. Press the “Location” tab on the Uconnect from the list that appears.
the Uconnect Mobile App, refer to your Uconnect Mobile App bottom bar.
Owner’s Manual Supplement. 4. Press the “Send To Vehicle” button, and then
2. Select the “Vehicle” icon to determine the confirm the destination by pressing “Yes,” to
location of your vehicle. send the navigation route to the Uconnect
3. Select the “Find Route” button that appears, Navigation in your vehicle.
once your vehicle is located. 5. Finally, confirm the route inside your vehicle by
4. Select your preferred Navigation App to route a pressing the “Go Now” option on the pop-up
path to your vehicle. that appears on the touchscreen, when the
vehicle is started.DRIVE DODGE MOBILE APP
NOTE: or scheduling your next appointment, we know • Contact customer care with one click.
The Owner’s Mobile App content is applicable to you’ll find the app an important extension of your • Access to vehicle heritage, parts, accessories,
vehicles sold in the U.S. market and are not available Dodge vehicle. Simply download the FREE app, and social media networks.
from the Canadian App Store or Google Play Store. select your make and model and enjoy the ride. • Schedule your next service appointment.
Key Features • Available in English and Spanish.
Features/Benefits
*App supports selected vehicles from model year
• Owner Information For Your Vehicle • Available for free on iOS and Android smart- 2011 to present.
• Accident Assistant phones and tablets.
To get this FREE application, go directly to the
• Online Service Scheduling • Select Dodge brand vehicles from model year
App Store or Google Play Store and enter the
• Roadside Assistance 2011 to current model year.
search keyword “Dodge”.
• Maintenance History • You can also add other Chrysler, Jeep, Ram,
FIAT or Alfa Romeo vehicles.*
• And More
• Easy access to vehicle information anywhere
To get this FREE application, go directly to the you go using categories, bookmarks, search
App Store or Google Play Store and enter the and an A-Z index.
search keyword “Dodge”.
• Vehicle information such as operating instruc-
The DRIVE DODGE Application is the essential tions, maintenance, service history, vehicle
app for owners of Dodge brand vehicles. The app controls and emergency procedures.
puts driver and lifestyle information right in the • Find a dealer or an FCA-certified repair facility.
palm of your hand, anywhere you go. Whether it’s
providing information about specific product fea- • Easily document and email an accident report.
tures, taking a tour through your vehicle’s equip- • A parking reminder that allows you to drop a pin
ment, staying up to date on your vehicle’s health, on your location and navigate back to your
knowing what steps to take following an accident, vehicle.Whether it’s providing information about specific
product features, taking a tour through your
vehicle’s heritage, knowing what steps to take
following an accident or scheduling your next appointment,
we know you’ll find the app an important extension of your
Dodge brand vehicle. Simply download the app, select your
make and model and enjoy the ride. To get this app, go
directly to the App Store or Google Play and enter the search
keyword “Dodge” (U.S. residents only). DOWNLOAD A FREE ELECTRONIC COPY
www.dodge.com/en/owners (U.S.) provides special offers O F T H E M O S T U P - T O - D AT E O W N E R ’ S
tailored to your needs, customized vehicle galleries, MANUAL, MEDIA AND WARRANTY
personalized service records and more. To get this
information, just create an account and check back often.
BOOKLET BY VISITING:
Get warranty and other information online – you can review WWW.MOPAR.COM/EN-US/CARE/OWNERS-MANUAL.HTML
and print or download a copy of the Owner’s Manual,
(U.S. RESIDENTS);
Navigation/Uconnect manuals and the limited warranties
QUICK REFERENCE GUIDE
FOURTH EDITION
CHARGER
18LD-QRG-AA
provided by FCA US LLC for your vehicle by visiting WWW.OWNERS.MOPAR.CA
www.mopar.com (U.S.) or www.owners.mopar.ca (Canada).
Click on the applicable link in the “Popular Topics” area of (CANADIAN RESIDENTS).
the mopar.com (U.S.) or owners.mopar.ca (Canada)
homepage and follow the instructions to select the DODGE.COM (U.S.)
applicable year, make and model of your vehicle.
DODGE.CA (CANADA)
©2017 FCA US LLC. ALL RI GHTS RESERVED.
DODGE I S A REGI STERED TRADEMARK OF FCA US LLC.You can also read
