What are the varieties of pipe fittings?
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
What are the varieties of pipe fittings?
Just as in mathematics, sets fall into subsets, types of reinforcement can be structured into varieties. Fittings are done
by the use of carbon steel flanges.
variety by purpose and scope
The largest subset is varieties by purpose and scope.
As classification features, operation features can be used - vacuum valves, cryogenic valves, or operating features, for
example, shut-off. The basis for separation is also: the installation and the presence of additional options (valves with
heating).
But the most significant reason to divide the pipeline valves into varieties is its purpose: control valves, anti-surge
valves, pressure reducing valves, drain valves, test and drain valves, etc.
Areas of application for pipeline a420 wpl6 fittings cannot but impose special requirements on it. The fittings used in
the gas industry must be airtight due to the high fire and explosion hazard, which in this case, is the working medium ─
gas.
Pipe fittings for the oil and oil refining industries, due to the sufficiently high chemical aggressiveness of oil, must have
increased corrosion resistance. An even more aggressive environment, including concentrated acids and alkalis, acts
on a860 wphy 60 pipe fittings used in the chemical industry.
pipeline connection varieties
According carbon steel pipe fittings manufacturers, the reinforcement is divided into flange, wafer, inner flange
(i.e., wafer mounted between the pipe flanges). Coupling fittings are equipped with connecting pipes with internal
threads. Welding fittings - pipe fittings for welding to the pipeline. Connecting branch pipes are also at fittings.
variety in design and body shaping
Based on the position of the nozzles, we can talk about straight fittings (connecting nozzles are coaxial or mutually
parallel) or angular reinforcement (the axis of the inlet and outlet nozzles are perpendicular or not parallel to each
other). Reinforcement with offset axes of nozzles is also produced.
If the cross-sectional area of the flow part is less than the area of the inlet port opening, ─ this is an incomplete
passage a860 wphy 52 fitting. If approximately equal to or greater ─ full bore fittings.
According to the method of manufacturing hull parts, cast, litho-welded, die - welded, stamp - welded reinforcement is
distinguished.
varieties by type of seals
Valves in which the stem, spindle, or other movable element is sealed concerning the environment by a stuffing box
seal is called a stuffing box.
Valves for which the packing is not used for sealing are called sealless valves. Bellows and membrane fittings fall into
this category.
The alphabets of most languages in the world contain dozens of letters. But this did not stop them from accumulating
hundreds of thousands of words. So with a860 wphy 65 pipe fittings ─ its incredible variety consists of a relatively
small number of classification units, measured in units, sometimes tens. And it appeared not by chance, but because of
the need to answer a huge number of questions, to find an algorithm for solving a large number of problems.
Such a wide range of requirements is presented to a234 wpb fittings pipe fittings that often technical solutions by
which they can be implemented come into conflict with each other, and the appearance of a large number of various
designs is one of the ways to overcome it. And classification is the best way not to get lost in this variety.You can also read
