TOOL CATALOG THE - Professional Tools & Accessories
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Professional Tools & Accessories Automotive | Commercial | Residential Paint Protection | Wraps | Vinyl & Graphics THE TOOL CATALOG
CONTENTS KNIVES & BLADES TUBE SQUEEGEES 1 19 SCRAPERS & BLADES INSTALLATION ACCESSORIES 4 21 HANDLED SQUEEGEES MEASURE/MARK & TRIM 6 23 SAFETY & SECURITY SPRAYERS & ACCESSORIES 11 24 SQUEEGEE ESSENTIALS CLEANING/PREP & CHEMICALS 12 25 PPF/WRAPS/VINYL & GRAPHICS SLITTERS & ACCESSORIES 15 28 HARD CARDS METERS 18 29
KNIVES & BLADES
KNIVES & BLADES
STANDARD 9MM KNIVES
GT126 OLFA “SILVER” SS KNIFE GT027 NT PRO A1 “RED DOT” KNIFE GT127 OLFA A1 KNIFE
The original Olfa stainless steel knife. Regarded by many installers as the Used for film pattern cutting and
finest professional knife available. trimming. Features a molded plastic
The blade can be advanced in 1/2 handle for maximum control and
segment increments for precision comfort. Right or left hand use.
control. Right or left hand use. Now
includes a stainless steel blade.
GT226 OLFA “SILVER 2” KNIFE GT1018 NT A250RP AUTO-LOCK KNIFE GT227 OLFA XA1 ERGONOMIC KNIFE
Significantly improved over the original Chemical-resistant and heat-resistant This ergonomically correct knife
“Olfa Silver”. Features right or left polypropylene grip. Ratchet auto- features a comfortable rubber grip for
handuse, blade position auto-lock, lock slider locks blade in place while better control and less fatigue.
and one-segment click-action. cutting. Right or left hand use.
GT1054 NT A300GR KNIFE GT124 PLASTIC UTILITY KNIFE
All-purpose standard duty utility knife Used for film pattern cutting and
with stainless steel sliding holder and trimming.
sturdy aluminum die cast grip for long
lasting use. Ratchet auto-lock slider
locks blade in place while cutting.
End cap also functions as a blade
snapper. Designed for either left or
right handed use with simple reversal
of blade.
NOTE
All knives include a carbon steel blade except the GT126,
GT226 & GT027 which include a stainless steel blade.
1
KNIVES & BLADES
KNIVES & BLADES
STANDARD 9MM BLADES
GT115
GT123
GT1031
GT116
GT115 OLFA AB10S STAINLESS GT123 OLFA AB50B CARBON GT1020 NT BA50SS STAINLESS
STEEL SNAP BLADES SNAP BLADES STEEL SNAP BLADES
Pack of 10. The industry standard Standard carbon snap blades Stainless steel snap blades from the
when it comes to snap blades for with superior sharpness and edge makers of the “Red Dot” knife. Use in
film and pattern cutting. Thirteen retention. This 9mm blade fits most 9mm and multi-blade cartridge knives.
cutting edges per blade. Use in most standard duty knives and has 13 Pack of 50.
standard duty knives. cutting edges per blade. Pack of 50.
GT116 OLFA AB50S STAINLESS GT1031 OLFA ULTRAMAX ABB50B
STEEL SNAP BLADES CARBON SNAP BLADES
Pack of 50. These blades are double-honed
for extreme sharpness and are 25%
sharper than the standard duty
carbon blade. Eight cutting edges per
blade, 50 blades per pack. Fits most
standard Olfa knives.
30° KNIFE & BLADES
GT1051 OLFA SAC1 KNIFE GT1052 OLFA A1160B 30° GT2100 BAD21P 30° BLADE 10PK
Slim stainless steel body with a 30° CARBON BLADES NT BAD-21P 30° blade. 10 blades per
angle blade for precision in pattern Standard duty acute angle snap-off pack, Carbon. Fits GT1051, GT026N
cutting. Great for graphics and paint blade for use when precision is a must. and GT027.
protection. Use GT1052 or GT2100 Seven cutting edges per blade strip.
replacement blades. Pack of 10.
MULTI-BLADE CARTRIDGE KNIVES
GT026N NT A553P INJECTOR GT984 NT A1000RP KNIFE GT114 OLFA PA2 PRO-LOAD KNIFE
CARTRIDGE KNIFE Cartridge cutter with aluminum die- Holds up to five blades at a time
Now comes with two 30 cast grip. Cartridge holds up to 5 giving you 65 new cutting segments
degree blades installed but will blades. per load.
accommodate standard 9mm blades
as well. Used for film pattern cutting
and trimming. Holds up to five blades
for automatic blade replacement
capabilities.
2
KNIVES & BLADES
KNIVES & BLADES
8PT HEAVY-DUTY KNIVES & BLADES
GT1019 NT L500GRP KNIFE GT111 8PT AUTO LOCK KNIFE GT112 OLFA LBB50B ULTRAMAX
NT heavy-duty knife with ratchet auto- Heavy-duty knife with breakaway 8PT BLADES
lock slider which locks the blade into points for use with security films 7 mil or Replacement blades for GT111 and
place while cutting. Blade storage in greater. Blade storage in handle. GT1019 heavy-duty knives. Triple-
handle. Use with 7 mil or greater films. honed for extremely sharp edge. Ideal
for cutting thick films, 7 mil or greater.
Pack of 50.
GT1021 BL50P BLADES GT131 8PT BLADES
Heavy-duty NT blades for use with the 18mm replacement blades. Fits GT111
GT1019 and GT111. Pack of 50. and GT1019. Pack of 5.
TOOL TIP
ANY BLADE CAN Try the most popular knife and blade option for the various applications:
- Automotive/Residential Window Films use GT126/GT027 (pg. 1) and GT116/
CUT OR GT1020 (pg. 2)
-Paint Protection use GT1051 and GT1052 (pg. 2)
SCRATCH GLASS! -Vinyl Graphics use GT026N/GT114 and GT123 (pg. 2)
It depends on the glass, -Safety and Security Films use GT1019 and GT112 (pg. 3)
edge of the blade and the
angle of the cut. No matter
what knife or blade you
use, be sure to use a SHARP
blade every time!
3
SCRAPERS & BLADES
SCRAPERS & BLADES
6” SCRAPERS & BLADES
GT107 6” TRIUMPH SCRAPER GT107A 6” ANGLED TRIUMPH SCRAPER GT107PC 6” TRIUMPH SCRAPER WITH
Lightweight and maneuverable. The handle is tilted at a 30° angle. SLIDE COVER
Includes cover and one double Includes cover and one double This is the new and improved version
edged blade edged blade. of the slide covered Triumph. With a
bigger button and smoother action,
the cover easily opens and closes
with no hassle. No more fumbling with
a separate blade cover while doing
ladder work. Great for regular window
cleaning, but not recommended for
stripping off old film.
GT106
GT110
GT983 6” ERGONOMIC GT983A 6” ANGLED ERGONOMIC GT106 6” RED HEAVY-DUTY
TRIUMPH SCRAPER TRIUMPH SCRAPER Scraper ideal for film removal. Includes
An improved version of the angled An improved version of the standard cover and one double edged blade.
6” Triumph scraper with a more 6” Triumph scraper with a more Use GT110 as replacement blades.
comfortable grip. Includes cover and comfortable grip and tilted handle.
one double edged blade. Includes cover and one double GT110 TRIUMPH HEAVY-DUTY
edged blade. CARBON BLADES
Replacement blades for the Red
Heavy-Duty Triumph Scraper (GT106).
This thicker blade (0.40 mm) offers
greater strength for those tough jobs.
Pack of 10.
GT108 6” TRIUMPH CARBON BLADES GT108SS 6” TRIUMPH STAINLESS GT108SS-HD 6” TRIUMPH STAINLESS
Carbon steel offers strong capable STEEL BLADES STEEL HEAVY-DUTY BLADES
scraping that lasts longer than stainless Long lasting rust resistant stainless steel This rust resistant stainless steel blade
steel blades but rust more easily. Use blade. Perfect for removing adhesive is thicker and stronger than the
these blades for scraping adhesive and other debris from glass surfaces. standard 6” Triumph Stainless Steel
and other debris from glass surfaces. The double edge blade offers you Blades. A must have for those tough
Double edged for more scraping per more scraping than other blades. film removal jobs. A new product
package. These blades fit any of the (0.15 mm x 6”) Pack of 25. exclusively for the tinting industry.
standard 6” Triumph Scrapers. (0.20 A must have for all residential and
mm x 6”) Pack of 25. commercial installers. (0.20 mm x 6”)
Pack of 25.
NOTE
All scrapers are packaged with a carbon blade.
4
SCRAPERS & BLADES
SCRAPERS & BLADES
4” SCRAPERS & BLADES
GT105 GT1007
GT104 4” SCRAPER WITH GT1023 AL PRO 4” STRIPPER GT105 4” CARBON SCRAPER BLADES
EXTENDED HANDLE This 4” scraper has an adjustable head Fits the GT104 and GT1023. (0.017mm x
4” scraper with extended handle as well as an adjustable knob for two 4”) Pack of 10.
allowing for better leverage. Use with handed use. Blades can be stored
GT105 or GT1007 as replacement inside the handle. GT1007 4” CARBON SCRAPER BLADES
blades. Blade cover included. Fits the GT104 and GT1023. (0.017mm x
4”) Pack of 100.
3” SCRAPERS & BLADES
TOOL TIP
Plastic razor blades are the most
effective way to safely prep
automotive glass. Although the
GT210 3” TRIUMPH SCRAPER GT211 3” TRIUMPH CARBON BLADES blades are plastic, proceeding with
Smaller version of the regular Triumph. Use in 3” Triumph Scraper (GT210). caution is always a good idea.
Designed to fit perfectly into corners. (0.20 mm x 3”) Pack of 10.
1” SCRAPERS & BLADES
GT138
GT212
GT994
GT138HYDE
GT109 1” CLIP SCRAPER GT138 HEAVY-DUTY 1” RAZOR SCRAPER GT212 1” NEON MINI SCRAPER
These effective scrapers will GT138HYDE HYDE 1” RAZOR SCRAPER Holds 1” single edge blade.
accommodate standard or stainless Retractable safety scraper; Use with GT140, GT140-12 & GT137.
steel 1” single edge blades as well as intermediate blade position keeps the
GT139 plastic razor blades. Try the Lil blade from sliding out while in use. GT994 BIG BLADE
Chizler in these handles for Jumbo size plastic razor blade perfect
more leverage. for cleaning & film removal.
(3” x 4”)
GT140
GT139
GT140-12 GT2023
GT140 #9 1” SINGLE EDGE BLADES GT137 1” SINGLE EDGE STAINLESS GT2023 SCRAPERITE PLASTIC
Use in any 1” blade holder. #9 Carbon STEEL BLADES RAZOR BLADES
steel single edge blade, non-rust Use in any 1” blade holder. Stainless These plastic razor blades are double
aluminum back. (.009”/.2286 mm) steel, uncoated. (.009”/.23 mm) Pack edged and safe for glass. Great for
Pack of 100. of 100. removing adhesives from window films
and vinyl decals. Pack of 100 blades.
GT140-12 #12 1” SINGLE EDGE BLADES
Use in any 1” blade holder. #12 GT139 PLASTIC RAZOR BLADES
Carbon steel single edge blade, non- Perfect for removing leftover film
rust aluminum back. (.012”/.3048 mm) and adhesive from surfaces that are
Pack of 100. easily damaged, such as rear window
defrosters or other sensitive glass. Pack
of 100.
5
HANDLED SQUEEGEES
HANDLED SQUEEGEES
GT054
GT056
GT050E
GT050 GT053
GT055
GT050 UNGER PRO (LATCH) HANDLE GT050A UNGER (SCREW) HANDLE GT056 18” SQUEEGEE & CHANNEL
The original Unger Pro Handle. For A modified Unger handle that has GT055 12” SQUEEGEE & CHANNEL
use with the GT053, GT054, GT055 or proven results for maximum water GT054 8” SQUEEGEE & CHANNEL
GT056 stainless steel channels with extraction. For flat glass applications GT053 6” SQUEEGEE & CHANNEL
black rubber for cleaning or blue use with the new Extruder channels Stainless steel channel and soft rubber
replacement blades (GT118) (GT252 & GT253). The handle also squeegee blade insert for use with the
for installation. works excellent with Super Clear Unger Pro Handle (GT050 or GT050E).
Max, Blue Max and Orange Crush Used in the flat glass cleaning process
GT050E UNGER ERGOTEC Squeegees. and in the final cleanup after the film
(SPRING) HANDLE installation to remove soap streaks
Features a spring mechanism for quick or smudges.
blade changing and a finger indent
on the top of handle for complete
control. For use with GT053, GT054,
GT055 or GT056 channels with black
rubber for cleaning or blue (GT118) for
installation.
GT045N GT252
GT048N
GT049N GT253
GT045N 140” SQUEEGEE BLADE GT1001-36 UNGER 36” HARD GT252 6″ EXTRUDER CHANNEL
GT048N 12” SQUEEGEE BLADE REPLACEMENT BLADE GT253 8″ EXTRUDER CHANNEL
GT049N 18” SQUEEGEE BLADE Hard replacement rubber is ideal for This channel works in your existing
Replacement blades for Unger warmer working conditions and for Unger handle or the GT050A. It is
squeegee channel. Use for window optimum liquid removal on large, flat designed to give your squeegee
cleaning, not installation. surfaces. blade added stiffness and a better
angle to aid in laying down the
film and extracting more water per
squeegee pass. Use GT118, GT2107 or
GT2108 squeegee material.
GT2107
GT208
GT2108 GT207
GT2107 120” FUSION ORANGE GT118 BLUE SQUEEGEE REFILL GT208 SIDE SWIPER HANDLE ONLY
CHANNEL REFILL (6”, 8”, 12”, 18” OR 120” ROLL) GT207 SIDE SWIPER WITH BLADE
GT2108 120” FUSION BLUE Use in the Unger squeegee channel A great tool for the lower edge of rear
CHANNEL REFILL as a finishing squeegee for maximum windows and behind brake lights. Use
Fusion Orange Channel squeegee water removal. Replacement blade 6” of GT118, GT2107 or GT2108 as a
is 85 durometer and Fusion Blue for GT207. Use with GT252 or GT253 replacement blade.
Channel Squeegee is 94 durometer. Extruder Channels.
Easily cut the roll to the channel.
GT081 SHORT-CUT
Short-Cut is a revolutionary tool
designed for reaching deep into the
window edge past the dot matrix.
Extraordinary rigidity, excellent grip,
but still nice and compact.
6
HANDLED SQUEEGEES
HANDLED SQUEEGEES
GT061 GT059
GT062 GT064
GT063 GT069
GT062 6” PRO SQUEEGEE DELUXE GT061 8” PRO SQUEEGEE BLADE GT059 8” FLATFOOT SQUEEGEE BLADE
GT064 8” PRO SQUEEGEE DELUXE GT063 6” PRO SQUEEGEE BLADE GT069 6” FLATFOOT SQUEEGEE BLADE
An installation squeegee as a ready- Replacement blade to Pro Squeegee Specially angled blades for the Pro
to-use assembly. Used to remove Deluxe (GT064 or GT062) used as Squeegee Deluxe (GT062 or GT064).
application solution during the a means of removing application The angle is designed to maximize the
installation of all flat glass film types. solutions from beneath the film during surface area in contact with the film,
the installation of all flat glass film thereby removing much more mounting
types. Square edge. solution than a standard Pro blade with
a square edge. Beveled edge.
GT040 SLIM FOOT GT034 WHALE TAIL SQUEEGEE GT1042R TITAN SQUEEGEE-RED
Modeled after the Big Foot Squeegee, Great for getting behind brake lights The Titan is made with the same
the Slim Foot has a slender design that and back window applications. plastic used to make bullet proof
can reach into tighter openings. This glass. This allows more strength and
no rib squeegee helps reach behind GT035 WHALE TAIL REPLACEMENT rigidity. The overall length is 14 3/4”
brake lights and has a rubber grip for BLADE which allows a longer reach for rear
secure handling. Measures 15” from windows and its unique design will
blade tip to handle end. GT036 WHALE TAIL HANDLE easily lift inner and upper door seals.
GT205
GT206
GT205 THE BULLDOZER I - AUTOMOTIVE GT985 PERFORMAX HANDLE GT043 BIG FOOT
Allows you to get to those hard to Ideal for water extraction when used Specifically designed to remove
reach areas, such as behind speakers, with GT117, GT117B, GT203 or GT257. water from the lower portion of rear
brake lights, low angles and rear Features a socket that accepts windows. Features a flex-firm blade
windows. Features a 6” squeegee standard broom or paint roller molded right into the long flattened
blade and is 15” in overall length. extensions. This allows installers to get tennis racquet-style handle. The
more leverage. handle is wrapped with genuine
GT206 THE BULLDOZER II - FLAT GLASS Head SofTac traction grip material.
Features reinforced ribs on the back Reaching the lower deck of back
side for extra rigidity and leverage. windows is not a problem with Big
Includes 6” squeegee blade and is Foot. This tool measures a full 15” from
15” in overall length. The Bulldozer blade tip to handle end.
Squeegees have a new rubber
compound for less slip resistance,
a flatter blade for better water
extraction and added plastic under
the blade corners for additional
strength.
7
HANDLED SQUEEGEES
HANDLED SQUEEGEES
GT178 THE REACH TOOL
This tool is designed to effectively squeegee water from the most difficult places
to reach. THE REACH allows you to squeegee water from the bottom of the back
window or windshield with ease.
THE REACH is made with a special formulated plastic and rubber in order to
achieve the necessary stiffness and durability of its four edges. This tool is 16 3/4
inches in length, and built with a double rubber blade on each side. One side
of the tool provides an excellent grip, while the other side uses both edges to
squeegee the water out; one pushes the water and the other drags the water.
This tool is completely adaptable with two different radiuses of curvature at each
side; in other words, one side is stiffer than the other.
Beveled Edge
Square Edge
GT204
GT122 GT117 GT117A GT117B
GT122 BLUE MAX SQUEEGEE GT117 5” BLUE MAX SQUEEGEE
WITH HANDLE GT117A 5” CROPPED BLUE MAX SQUEEGEE
GT204 SUPER CLEAR MAX Installation squeegee for automotive and flat glass applications. Harder than
SQUEEGEE WITH HANDLE GT203; great for water removal. The GT117A has cropped sides with a beveled
Ready-to-use installation squeegee. edge.
The specially modified Unger handle GT117B SQUARE BLUE MAX 5” HAND SQUEEGEE
makes these installation squeegees Ideal for installing security film.
must haves. The handle is sold
separately as GT050A. Replacement
blades are available as part number
GT203A and or GT117A.
GT203
GT203A
GT203 5” SUPER CLEAR MAX GT037 FUSION HANDEE TOOL GT939 5” PINK CLEAN
SQUEEGEE The Fusion Hand Dee Tool is a Pink Clean is a 5” Cropped squeegee
GT203A 5” CROPPED SUPER CLEAR MAGNETIC handle that can blade. The softest blade from Fusion
MAX SQUEEGEE accommodate any 5” squeegee. Tint Tools. This blade is specifically
Softer version of the Blue Max Equipped with a removable “jaw” designed with cleaning in mind. It is
Squeegee, more flexible for back and a rounded grip to fit perfectly in recommended to use the Pink Clean
window installations. your hand. squeegee blade to easily remove
liquids with minimal pressure applied
by the user.
GT2109
GT1022
GT1022B GT2110
DUROMETER
HARDEST SOFTEST
GT1022 STROKE DOCTOR GT2109 FUSION BLUE STROKE BLADE LEGEND
GT1022B STROKE DOCTOR GT2110 FUSION ORANGE STROKE
REPLACEMENT BLADE BLADE
Designed with an I-beam construction Fusion Blue and Orange Stroke Blades
handle that features an ergonomic fit the Stroke Doctor handle (GT1022).
slip-resistant grip and longer blade to Blue is 94 durometer while the Orange
apply squeegee pressure more evenly is softer at 85.
in the most hard to reach places.
8HANDLED SQUEEGEES
HANDLED SQUEEGEES
GT2056B GT2056Y GT2056R
GT2057B GT2057Y GT2057R
GT2056B GO DOCTOR BLUE (HARD) GT2057B GO DOCTOR BLUE BLADE (HARD)
GT2056Y GO DOCTOR YELLOW (FLEX-FIRM) Use for window film and auto wrap installs.
GT2056R GO DOCTOR RED (SOFT)
A fully integrated squeegee system where all of the GT2057Y GO DOCTOR YELLOW BLADE (FLEX-FIRM)
components have been designed together, to work GT2057R GO DOCTOR RED BLADE (SOFT)
together. The I-beam handle fits comfortably in your hand. Use for window film, auto wraps, vinyl graphics and paint
The I-beam handle is wrapped with a comfortable, non-slip protection installs.
material that provides secure grip. Go Doctor incorporates
a quick-change blade system for speedy on the job
replacements.
GT154Y
GT153O
GT153Y
GT154O
GT2057D DUAL DENSITY GO DOCTOR GT153Y GRIP-N-GLIDE YELLOW GT154Y GRIP-N-GLIDE YELLOW
REPLACEMENT BLADE (FLEX-FIRM) REPLACEMENT BLADE (FLEX-FIRM)
Replacement blade for any Go GT153O GRIP-N-GLIDE ORANGE GT154O GRIP-N-GLIDE ORANGE
Doctor Handle. Get two blades for the (SOFT) REPLACEMENT BLADE (SOFT)
price of one. The Dual Density blade is Grip-N-Glide combines an ergonomic Unlike tube squeegees with their belt-
double sided and reversible. 85A RED, handgrip with high-performance, sanded round edges, the Grip-N-Glide
95A BLUE. interchangeable blades to give you features a .24” thick squeegee blade
just what you need for tint, wrap and with French edges that are machine
PPF installations. milled for maximum water extraction.
Use either the firm yellow 90A or
softer orange 85A blade to meet
your application needs. The blades
fit snugly into a frame that is covered
by a substantial handgrip designed
with comfortable finger grooves and a
special surface texture to provide the
ultimate control in either wet or dry use.
GT2102
Orange side - 85 Durometer GT259 GT257
Blue side - 95 Durometer GT258
GT2103
GT2101 5” HYBRID SQUEEGEE GT259 8” ORANGE CRUSH GT2102 5” CLEAR CRUSH SQUEEGEE
On one side the Hybrid is an Orange GT258 5” CROPPED ORANGE CRUSH GT2103 5” CROPPED CLEAR
85 durometer squeegee blade and GT257 5” ORANGE CRUSH CRUSH SQUEEGEE
on the other side a harder Blue 95 These blades help expel water while The Clear Crush is a squeegee blade
durometer. This dual blade features keeping their strength. The Orange designed for users that prefer the
double beveled working edges. Crush conforms to curved glass. flexibility of a soft squeegee but with
Blades fit into a handled grip or can the stiffness of a harder squeegee. This
be used alone. blade is the best of both worlds. Soft
enough to squeegee curved surfaces
without having to apply too much
pressure but stiff enough to push or
DUROMETER
HARDEST SOFTEST
pull solution away from the job
LEGEND at hand.
9HANDLED SQUEEGEES
HANDLED SQUEEGEES
GT260
6”
3.5”
6” GT1046
GT1047 GT1058
GT117-8
GT1058S GT261
GT1047 5” FUSION HANDLE GT117-8 8” BLUE MAX SQUEEGEE GT260 5” YELLOW FLAT OUT BLADE
GT1058 5” FUSION HANDLE - The favored Blue Max installation GT261 8” YELLOW FLAT OUT BLADE
SHORT HANDLE squeegee is now available in 8” The Yellow Flat Squeegees are
GT1058S 5” FUSION SHORTY HANDLE making it perfect for flat glass installs! available in both 5” and 8” widths.
These handles are designed to Use this blade in the 8” Fusion Handle Slightly harder than the Orange Crush
optimize your leverage in removing (GT1046) or 8” Fusion Stretch Handle and comparable in hardness to the
mounting solution. Great for high (GT058) for great water extraction. Blue Max products they work great in
performance automotive films and GT1046 8” FUSION HANDLE flat glass and security applications. For
smaller residential windows. These Ideal handle for all residential and best results try in a Fusion Handle, Fusion
handles accommodate any standard commercial applications. Holds any Stretch series or Thor’s Hammer.
5” wide squeegee blade. Fusion 1/4” thick squeegee blade.
Shorty has the same handle length as
GT1058 but without the collar.
GT2114A
GT273 GT2115
GT058
GT057
GT2114 GT2115B
GT2114B
GT273 MAGNUM RED LINE SQUEEGEE GT2115 8” RED LINE EXTRACTOR 1/4” GT057 5” FUSION STRETCH HANDLE
BLADE DOUBLE BEVEL SQUEEGEE BLADE GT058 8” FUSION STRETCH HANDLE
GT2114 5” RED LINE EXTRACTOR 1/4” GT2115B 8” RED LINE EXTRACTOR 1/4” The Fusion Stretch handle is the latest
DOUBLE BEVEL SQUEEGEE BLADE NO BEVEL SQUEEGEE BLADE design for installing flat glass and
GT2114A 5” RED LINE EXTRACTOR 1/4” The Fusion 8” Red Line Extractor security films. These handles come
SINGLE BEVELED CROPPED SQUEEGEE Squeegee Blade is 1/4” thick with in both 5” & 8” widths. This handle
BLADE a durometer of 95. These extractor features a 14 ½” metal extension and
GT2114B 5” RED LINE EXTRACTOR 1/4” blades provide great liquid removal two rubber grip sections for maximum
NO BEVEL SQUEEGEE BLADE with every pass. Use with any of the water removal. Accommodates any
The Fusion 5” Red Line Extractor standard 8” Fusion Handles. 1/4” squeegee blade.
Squeegee Blade is 1/4” thick with
a durometer of 95. These extractor
blades provide great liquid removal
with every pass. Use with any of the
standard 5” Fusion Handles.
DUROMETER
SOFTEST
LEGEND
HARDEST
10SAFETY & SECURITY
SAFETY & SECURITY
GT058BM 8” FUSION BIG MOUTH STRETCH HANDLE GT057BM
GT1046BM 8” FUSION BIG MOUTH HANDLE
GT057BM 5” FUSION BIG MOUTH STRETCH HANDLE
GT1047BM 5” FUSION BIG MOUTH HANDLE
The Fusion Big Mouth Handle features brass inlaid screw
threads and stainless steel screws. This handle is designed to GT058BM
hold a 3/8” thick squeegee. One of the biggest issues installers
encounter when installing thick mil films is extended dry time.
This is mainly due to not being able to extract a majority of GT1047BM
the solution because their current tools flex too much or they
don’t have enough strength to push as hard as they need to.
The Big Mouth handles and 3/8” blades are the solution to that
problem by taking more of the force required to adequately GT1046BM
finish the job off of the installer and onto the tool. If you want
to get optimum use of your Big Mouth Blade, use the Fusion
Big Mouth Stretch Handle. The 14 1/2” extended handle is
texturized with dual grips for maximized leverage.
GT2117 GT2118 GT2143 GT2144
GT2117 5” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE GT2143 5” BIG MOUTH 3/8” THICK SINGLE BEVEL SQUEEGEE BLADE
GT2118 8” BIG MOUTH 3/8” THICK NO BEVEL SQUEEGEE BLADE GT2144 8” BIG MOUTH 3/8” THICK SINGLE BEVEL SQUEEGEE BLADE
The 3/8” thick blades are ideal for thick security films, graffiti films, hurricane/ bomb blast films, and windshield protection
films. It is a much stiffer option at 90 durometer designed to optimize solution extraction while not putting more pressure on
the back and arms of the installer. GT2143 and GT2144 have a beveled edge. Use with a Big Mouth Handle.
GT1006
GT041
GT042 GT117C
GT042 8” SILVER SECURITY SQUEEGEE GT1006 THOR’S HAMMER GT2128 FUSION FORCE GRIP
Comfortable, ergonomic handle is Use for 6-mil+ safety film installations, A speciality handle made for pushing
designed especially for security film and final pass on slow drying thin films. attachment systems into proper
installation. Comes equipped with the (Flat Glass Applications) Use GT117C placement.
GT041 blade. Curved handle applies as a replacement blade.
more pressure to surface, reducing
fatigue and ensuring easier, better GT117C SQUARE BLUE MAX-NARROW
installations. Blade is replaceable with Replacement Blade for GT1006 Thor’s
either the Security Squeegee (GT041), Hammer.
Yellow Flat Out Blade (GT261), or
Orange Crush (GT259) blade.
GT041 8” SILVER SECURITY
SQUEEGEE BLADE GT128 CERAMIC SAFETY
Standard replacement blade for TOOL TIP FILM CUTTER
GT042. Designed to deliver rapid, precise
Big Mouth Handles are designed
for 3/8” thick blades only. cuts for thick gauge safety films. It is
intended for precision pre-cutting on
flat, square-edged tables.
11SQUEEGEE ESSENTIALS
SQUEEGEE ESSENTIALS
GT088
GT068
GT995 WHITE KNIGHT SQUEEGEE GT066 6” CLEAR SUPER SQUEEGEE GT068 HARD CARD SHARPENER
Large squeegee with narrow handle Ideal for general purpose A must have to keep hard card and
allowing for better reach. squeegeeing. The consistency of the other squeegee edges smooth.
material produces great results with Uses 9mm replacement blades.
minimal effort.
GT088 BONDO SQUEEGEE
Flexible and soft card style squeegee.
Great for third brake light installs.
GT032Y
GT1050
GT092
GT091
GT032G GT1049
GT091 SLAMMER GT032Y TAIL FIN YELLOW (FIRM) GT1049 GATOR BLADE I
Used for cleaning corners and along GT032G TAIL FIN GREEN (SOFT) GT1050 GATOR BLADE II
gaskets, wicking water out along Great for getting behind brake lights The Gator Blade I and Gator Blade
borders and easily reaches rear and back window applications. II products are alternatives to the Lil
windows. Finger holes make holding onto the Chizler. Each has a unique shape
Tail Fin easy. to give you a better grip making it
GT092 SHUTTLE easier to apply pressure.
A hard card with the ability to reach
into tight areas located at the bottom
edge of rear window glass.
GT083
GT083W
GT2081G GT2082G
GT2081B
GT083Y
GT2082B
GT083YL
GT2081B SMOOTH-IT MAT-BLACK GT2082B BLACK REPLACEMENT MAT GT083 ORIG LIL CHIZLER
GT2081G SMOOTH-IT MAT-GREY GT2082G GREY REPLACEMENT MAT GT083Y YELLOW DURA CHISEL
Smooth-It is designed to effectively Smooth-It Replacement Mats are sold GT083W LIDCO WHITE CHIZLER
and evenly smooth out the edge of in a 3 pack. The black (600D) mat is GT083YL LIDCO SOFT YELLOW CHIZLER
most tools used for film installation. a medium fabric that works best and Ideal for removing decals, film or
It works great on plastic and rubber faster on big or deep scratches. The adhesive from sensitive surfaces. Use
tools. The black mat is a medium grey (1000D) is a fine fabric, ideal for for pressing down small film creases or
fabric that works best and faster on removing small or light scratches on air bubbles. The White Chizler is slightly
big or deep scratches in the tool’s your installation tools. larger, has thicker edges and is harder
edge while the grey mat is a fine than the original pink Lil Chizler or
fabric that is ideal for removing small the Yellow Dura Chisel. The Lidco soft
or light scratches from the tool. yellow Chizler is more flexible than all
the others.
GT202
GT148
GT202B GT149
DUROMETER
HARDEST SOFTEST
GT202 THE CONQUERER SQUEEGEE GT149 12” BLOCK SQUEEGEE LEGEND
GT202B THE BLUE CONQUERER GT148 6” BLOCK SQUEEGEE
SQUEEGEE Combination squeegee/hard
The Conquerer is the original corner card used for finishing during film
reach tool. Features a soft squeegee installations. Can be cut to various
blade along one edge and pointed angles to reach tight, sharp corners.
hard card tips on the ends making it a
versatile staple to any tool kit. Use the
Blue version for a harder blade. TOOL TIP
The Tail Fin (GT032) is a
great tool for squeegeeing
behind rear brake lights.
12SQUEEGEE ESSENTIALS
SQUEEGEE ESSENTIALS
GT201PLT
GT201Y
GT201G GT201PCH
GT201G GREEN CONTOUR (SOFT) GT113Y YELLOW DIAMOND TIP (SOFT)
GT201Y YELLOW CONTOUR (FLEX-FIRM) Designed to meet the challenge of hard to reach areas,
GT201PLT PLATINUM CONTOUR (HARD) with square edges and 20° angled corners on both
GT201PCH PEACH CONTOUR (FLEX-FIRM) sides. The raised area in the center gives you a secure,
Gives you curves where you need them. Designed to slip-resistant grip, even when wet. A great squeegee
match all those concave surfaces installers see every day. because of the firm texture delivering pressure to the
A great fit for window film, paint protection or vinyl installs. point-of-contact while the special material helps prevent
The Contour hugs surfaces evenly while spreading radial scratching. Ideal for bumping edges and heat shrinking
pressure outward for quick film adhesion. The elongated because of the high heat-resistant material.
triangular shape gets in to all those hard to reach areas.
GT151B
GT151W
GT151Y
GT256 POWER STROKE YELLOW (SOFT) GT151W WHITE QUICK FOOT (FLEX-FIRM)
The original hand held molded squeegee, designed to fit GT151B BLUE QUICK FOOT (SOFT)
comfortably in your hand. Measures 5.7” from tip to tip. GT151Y YELLOW QUICK FOOT (HARD)
Works well with dyed films and first pass on metal films. A stiff squeegee with a handle for jobs that require
medium reach. Slim and trim with an unwrapped handle.
Comes in a variety of flex ratings to meet a wide range of
applications.
GT044B
GT060
GT044R
GT044BLK
GT060PCH
GT060 EZ WING LIME (FLEX-FIRM) GT044B LITTLE FOOT BLUE (SOFT)
GT060PCH EZ WING PEACH (FLEX-SOFT) GT044R LITTLE FOOT RED (FLEX-FIRM)
The first difference in the EZ Wing from a product like the GT044BLK LITTLE FOOT BLACK (HARD)
EZ Reach or EZ Reach Ultra is the unique chizzler tip that The Little foot features the unique blade shape of the Big
enables you to flip it over to chisel out those stubborn Foot without the handle. Fits comfortably in your hand and
creases or dust spots. The second feature of the EZ Wing is features an angled, long-reach tip that gets behind gaskets
the increased stiffness across the nose of the tool. This will and rubber seals easily. This squeegee measures about 6”
allow you to apply more pressure out at the tip in those (15 cm) along the usable edge. The pointed edge of this
situations where you are reaching into a tight spot. Lastly tool allows the installer to squeegee in very tight areas. Has
the CCT technology provides a curved main edge. plenty of room to keep a good grip on the squeegee.
TOOL TIP
ProToolsNow PEACH is a super-lubricated material
option for Hard Cards, Contours, and EZ Wings.
DUROMETER
SOFTEST
Peach’s heavy loading of special lubrication creates
a unique reformable substrate when needed to shift LEGEND
shapes. These products glide effortlessly over the
surface of every application.
HARDEST
13SQUEEGEE ESSENTIALS
SQUEEGEE ESSENTIALS
GT1025M REBEL-MANGO (FLEX-FIRM) GT1070 PLATINUM SMART CARDZ
A hybrid of the bump card and Diamond Tip. Great as an The modern version of the hard card squeegee, only
applicator or use as a trim guide on flat glass. Rebel has better! 25% wider than a hard card, with a tapered tip,
a unique diagonal shape, reaching corners easily. The comfortable grip and thin squeegee edge make it the
parallel grip ridges make holding the Rebel easy. smartest tool in your apron. Great for sliding under gaskets
and seals. Use Smart Cardz anywhere you would use hard
card squeegees.
GT200 GT2003
GT200PLT
GT2003PLT
GT200 EZ REACH ULTRA GOLD (FLEX-FIRM) GT2003 ORIGINAL EZ REACH GOLD (FLEX-FIRM)
GT200PLT EZ REACH ULTRA PLATINUM (HARD) GT2003PLT ORIGINAL EZ REACH PLATINUM (HARD)
If you like the Original EZ Reach, you are going to love Ultra! Stop cutting down hard card squeegees and use this
It is exactly the same except the hole has been removed versatile tool instead. These triangular cards with flat edges
to make it stronger and the top has been trimmed down to are perfect for putting down those little corners of film in
give installers yet another handy angle to work with. hard to access areas. The gold version is flex-firm while the
Designed specifically to get at the corners of quarter glass platinum offers a hard card texture with internal lubrication
windows, you will also reach for it again and again to put technology to help prevent scratching. EZ Reach is the
down those little corners of film in hard to access areas. ultimate corner tool.
GT2042Y GT2042O
GT2043N
GT2042B
GT2042B TRI-EDGE BLUE GT2003 BLUE BLUE FROG EZ REACH
GT2042Y TRI-EDGE YELLOW An extension of the Original EZ Reach. The Blue Frog is the
GT20420 TRI-EDGE ORANGE most slippery of the EZ Reach family.
GT2043N TRI-EDGE PLUS
Precision angles, smooth edges and a comfortable grip.
Tri-Edge is the new standard in the industry. Tri-Edge Plus
features a rubber squeegee edge to help prevent dirty
water returning to any open surface.
GT2063B GT2063Y
GT2063P
GT2063O
DUROMETER
SOFTEST
GT2063P TRI-EDGE X PINK LEGEND
GT2063B TRI-EDGE X BLUE
GT2063Y TRI-EDGE X YELLOW
GT2063O TRI-EDGE X ORANGE
HARDEST
The angles have been recalculated and extended into a
bigger tool to make hard to reach areas more accessible.
14PPF/WRAPS/VINYL & GRAPHICS
PPF/WRAPS/VINYL & GRAPHICS
GT2018
GT2021
GT2021-4
GT2017
GT2017 FINISH LINE KNIFELESS TAPE GT2067 DESIGN LINE KNIFELESS TAPE GT2021 12YD. SLIP TAPE
The Knifeless Tape has a high strength Use Design Line Knifeless Tape to GT2021-4 4YD. SLIP TAPE
filament that creates a clean sharp create graphic elements and striping Slip tape is the ultimate product for
cut without the risk of damaging on single layers of vinyl that have making your application squeegees
painted surfaces. (3.5 mm x 50 m roll) curves and contours. Design Line smoothly and safely glide across
GT2018 BRIDGELINE KNIFELESS TAPE tape stretches more than other window film, paint protection, car
Bridgeline Knifeless Tape is great for products so it follows contours and wrap and vinyl graphic applications.
creating gaps and pinstripes (like rally turns easier. (3.5 mm x 50 m roll) Avoid tearing or scratching the
stripes). 12.7 mm x 50 Meter rolls. *Not material you are working with. Include
recommended for chrome or other this product in your tool box!
metalized or textured films.
SC2
SC50
SC2 SOOPER CLIP (2 PACK) GT1000 MACTAC FELT SQUEEGEE GT1010 3M WET OR DRY SQUEEGEE
SC50 SOOPER CLIP (50 PACK) Recommended for paint protection or Soft rubber card style squeegee.
Faster and easier than tape or rubber vinyl graphic installations. The soft felt Recommended for paint protection
bands. These brightly colored Sooper is designed to avoid scratching. installations.
Clips are designed for efficiency.
GT2099 SUEDE BLADE STRIP GT1065 4” LIDCO FELT SLEEVE GT1064 4” BUMP CARD WITH
4″ Suede replacement strip. These are A felt wrap for any 4” hard card FELT EDGE
die cut to fit the 4″ Speed Wing. Speed squeegee. Four inch hard card with two ridges or
Wing can be found on page 18. “bumps”. One edge is wrapped in felt.
TOOL TIP
GT2096-4 Felt edge tools are becoming increasingly popular due to the
GT2097-4
changes in the industry. From Car Wraps, Vinyl Graphics, to Paint
Protection films there is a felt product for most applications.
Check out this growing selection of products.
GT2096-4 4” LEMON SUEDE BLADE (FLEX-FIRM)
GT2097-4 4” CHERRY SUEDE BLADE (SOFT)
Evolved from the success of the Speed Wing family the new
Suede Blade has quickly answered a lot of challenges for
installers. The Suede Blade comes with a dual layer fabric that
gives installers a cushioned, smooth fabric over the edge of the
squeegee. The Suede Blade glides over window tint, paint
protection film and vinyl graphics/wraps with ease.
15PPF/WRAPS/VINYL & GRAPHICS
PPF/WRAPS/VINYL & GRAPHICS
GT2007
GT2008
GT2006 PURCHASE AS A SET WCKNIFE WCBLADE
OR INDIVIDUALLY.
GT2005
GT2005 MANGO SMART CARD WITH FELT WCKNIFE WRAP CUT LINER KNIFE
GT2006 MANGO REBEL WITH FELT The ultimate vehicle wrap knife! The Wrap Cut Knife by
GT2007 MANGO LITTLE FOOT WITH FELT Image 1 Impact is made specifically to cut through just the
GT2008 MANGO BUMP CARD WITH FELT liner side of any pressure sensitive vinyl graphic and wrap
GT1085 MANGO PRO PACK WITH FELT (SET) film. This knife will only cut through the paper release liner of
The Monkey Strip felt added to the edge of these tools the vinyl.
make them perfect for paint protection, vinyl signs and
graphics. (Felt strip not installed) WCBLADE REPL BLADES FOR WRAP CUT KNIFE
This is the replacement blade for the Wrap Cut Knife,
WCKNIFE. Each blade has 4 available cutting edges. 10
blades per pack.
GT237 SUNNY TUCKER WG1 WRAP GLOVE LG WG2 GHOST WRAP GLOVE
This tool is a must when applying WG1XL WRAP GLOVE XL The Ghost Glove is extremely slick so
graphics or PPF to challenging The Wrap Glove is sold in pairs and is defining edges with hands is
surfaces. Effortlessly glides over the a must have for anyone installing vinyl immediate with no drag. This glove
film surface while tucking in, wrapping graphics and vehicle wraps. Installing is lint and static free and prevents oil
around and laying down. with your bare hands can cause over transfer and fingerprints. Ghost Glove
stretching and puckering of the vinyl is rated as A2 (extremely) cut resistant.
as well as potential damage from One size fits most. Ghost Glove is sold
the transfer of oils on your skin. These as ONE glove not a pair.
lint free and durable Wrap Gloves
reduce friction while handling the
material giving you great results every
time.
MOLD5
MOLD11
WES WET EDGE SQUEEGEE MOLD5 MOLDING & TRIM BPOP BUBBLE POPPER PEN
Wrap your vehicles faster and better. REMOVAL TOOLS The Bubble Popper Pen is a must
The only squeegee applicator made MOLD11 MOLDING & TRIM have tool for any vinyl graphics
to use wet. No scratches, no marks, REMOVAL TOOLS installer or car wrapper. This tool is
just smooth motions that easily glides Mold5 includes five distinctive tools used to put a pin hole (never a knife
across vinyl films and painted surfaces and Mold11 includes eleven distinctive slit) into your vinyl, printed graphics
without worry of mistakes or damage. tools for the easy removal of body or car wrap where a bubble or rivet
The Wet Edge Squeegee is a Teflon fasteners, interior trim pieces, exterior might be to release the air and
squeegee with a unique microfiber body moldings, wheel hub caps, etc. flatten the film graphic on to the
bonded to it. Can be used either Made from heavy-duty plastic to substrate.
wet or dry. This is the top of the line prevent scratching and damage to
applicator in the business. Colors vary. vehicle surfaces.
16PPF/WRAPS/VINYL & GRAPHICS
PPF/WRAPS/VINYL & GRAPHICS
XMH6
XMH
XMH XTREME MAGNET (SINGLE UNIT) MONKEY STRIPS 4″ MONKEY STRIP
XMH6 XTREME MAGNETS-6 PER BOX These pre-cut buffers fit any standard 4″ squeegee.
These handy body magnets make applying vinyl and vehicle They are far superior to standard felt strips and will help
wraps faster and easier by acting as another hand to hold prevent scratches to the wrap material during installation.
the material. You can also use them in the place of masking Give your hard plastic squeegees a soft and smooth side
tape or pre-mask to position the material on the vehicle. with the Monkey Strips.
GT2105
GT2104
GT2092 4” PPF HORNET PADDLE GT2106 4” PPF HYBRID PADDLE GT2104 5” PPF BLACKOUT SQUEEGEE
GT2092-0.5 0.5” PPF HORNET PADDLE This paddle squeegee is dual GT2105 5” CROPPED PPF BLACKOUT
GT2092-2 2” PPF HORNET PADDLE durometer and designed for paint SQUEEGEE
GT2092-6 6” PPF HORNET PADDLE protection films that feature a durable The PPF Black Out is a squeegee
This triple durometer paddle squeegee hard coat. The blue side of the PPF blade designed specifically for paint
offers the handler two durometers Hybrid is a hard 94 durometer while protection film installs, but has also
to install with. The black install side the orange side is a more flexible 85 become a favorite in the automotive
measures in at a firm but flexible 80 durometer. window film industry. The PPF Black
durometer and the yellow side at a Out features a high content of slip
softer more pliable 70 durometer. additives to help the tool slide easily
across paint protection films. At
88 durometer it is flexible enough
to conform to odd surfaces. Pair
this blade with a magnetic Fusion
Hand Dee (GT037) to help hold the
paint protection film in place during
installation.
SQ4G GOLD NYLON BLEND SQUEEGEE SQSOFT4 GREEN SOFT FLEX SQUEEGEE
This uniquely nylon blended gold squeegee comes with The 4” Green Soft Flex Squeegee is the thinnest and the
a harder and softer side to give you a dual purpose tool softest installation card that we offer. Made from a unique
all in one card. This card will also be more durable than rubber and plastic blend, this squeegee has excellent
your typical plastic squeegee as it is made of a higher bend and flex characteristics which make it perfect for
grade nylon blended material. This card features three applications on curved surfaces.
rounded corners and one 90 degree sharp corner to
help with any shape or application challenge.
ER1 EMBLEM REMOVAL TOOL RB RIVET BRUSH IPEN INSTALLER’S PRIMER PEN
This tool is used before the vehicle Made of stiff bristle synthetic fiber, the The Installer’s Primer Pen is easy to
wrap/vehicle graphic application to rivet brush for fleet graphic installers keep in your tool pouch, pocket, or
remove emblems, logos and badges helps form flexible cut and printed tool box. Fast and easy to use on all
from your vehicle. Our Emblem vinyl over the rivet surface. your applications that require precise
Removal Tool comes with custom application of Primer 94. Works with
designed ergonomic handles that are any brand of vinyl film and can be
comfortable to use. used anywhere Primer 94 is required.
Ships ground domestic only.
17HARD CARDS
HARD CARDS
GT086GLD
GT086BLU GT086BLK GT086W
GT086PUR GT086PCH GT086PNK GT086PLT
GT086BLU BLUE HARD CARD GT086W WHITE HARD CARD
GT086PUR PURPLE HARD CARD GT086PNK PINK HARD CARD
GT086BLK BLACK HARD CARD GT086GLD GOLD HARD CARD
GT086PCH PEACH HARD CARD GT086PLT PLATINUM HARD CARD
GT087SQ GT087 GT099 GT080
GT087FT GT087GRY GT079
GT087SQ SQUARE YELLOW LIDCO SQUEEGEE GT099 UNIVERSAL SQUEEGEE
GT087FT FLAT YELLOW LIDCO SQUEEGEE GT079 4” 3M GOLD SQUEEGEE
GT087 YELLOW LIDCO SQUEEGEE GT080 4” 3M BLUE SQUEEGEE
GT087GRY GRAY LIDCO SQUEEGEE
GT087-6GRY GT086-6Y
GT086-6W
TOOL TIP
Use Slip Tape (GT2021 or GT2021-4 page 15) on
any edge to increase slip and reduce the risk of
scratching.
GT087-6GRY 6” GRAY LIDCO SQUEEGEE
GT086-6Y 6” YELLOW HARD CARD SQUEEGEE
GT086-6W 6” WHITE HARD CARD SQUEEGEE
GT2072-4 GT2072-6 GT2072-8
TOOL TIP
4” Speed Wings are now also available with a suede
edge. Check out Suede Blades on page 15.
GT2072-4 4″ LIME SPEED WING (HARD)
GT2072-6 6″ LIME SPEED WING (HARD)
GT2072-8 8″ LIME SPEED WING (HARD)
GT2076-4 4″ LEMON SPEED WING (FLEX-FIRM)
GT2076-6 6″ LEMON SPEED WING (FLEX-FIRM)
GT2076-8 8″ LEMON SPEED WING (FLEX-FIRM)
GT2077-4 4″ CHERRY SPEED WING (SOFT)
GT2077-6 6″ CHERRY SPEED WING (SOFT)
DUROMETER
HARDEST SOFTEST
GT2077-8 8″ CHERRY SPEED WING (SOFT)
The Speed Wing is designed with “wings” to enable the LEGEND
installer to reach areas typically out of the reach of most
bump, bondo, teflon and hard cards. The Speed Wing comes
with one flat edge and one curved edge. Speed Wing is
made from materials that enable it to slide across most film
surfaces easily while maintaining its rigidity to lay the material
flat and remove moisture or air trapped underneath. Features
new Contour Control Technology.
18TUBE SQUEEGEES
TUBE SQUEEGEES
GT119 GT119B GT120
GT152
GT121
GT150
GT146
GT119 4” BLACK SMOOTHIE TUBE SQUEEGEE GT152 5” RED TURBO BLADE
GT120 9” BLACK SMOOTHIE TUBE SQUEEGEE GT150 18 1/2” RED TURBO BLADE
GT121 28” BLACK SMOOTHIE TUBE SQUEEGEE The hardest version of the Turbo Blade, used for removal of
Soft black squeegee with gray pvc handle. application solution during the installation process.
GT119B 4” BLACK SMOOTHIE BLADE
GT146 28” BLACK SMOOTHIE BLADE
Squeegee tool used for glass cleaning, sometimes called
the “Smoothie”. Economy size (28”) usually cut to shorter
lengths before use.
GT1026 GT235S
GT2053
GT145S
GT2004
GT147S
GT2053 4 1/2” GREEN TURBO BLADE GT1026 3 1/2” SOFT DK. YELLOW TURBO SQUEEGEE
GT2004 18 1/2” GREEN TURBO BLADE GT235S 5 1/2” SOFT DK. YELLOW TURBO SQUEEGEE
The Green Turbo is perfect for paint protection installs, GT145S 18 1/2” SOFT DK. YELLOW TURBO SQUEEGEE
can be cut down to smaller sizes, and has a durometer GT147S 18 1/2” SOFT DK. YELLOW TURBO BLADE
(hardness) between the GT146 Black Smoothie and the A soft installation squeegee used to remove application
GT147 Yellow Turbo Blade. solution during installation of all auto and paint protection
films.
GT235 GT145
GT236 GT147
GT235 5 1/2” YELLOW TURBO SQUEEGEE
GT236 5 1/2” YELLOW TURBO SQUEEGEE BLADE
GT145 18 1/2” YELLOW TURBO SQUEEGEE
GT147 18 1/2” YELLOW TURBO SQUEEGEE BLADE
Used for removal of application solution during the
installation process. You can cut the blade down to smaller
lengths if desired.
DUROMETER
SOFTEST
LEGEND
HARDEST
19TUBE SQUEEGEES
TUBE SQUEEGEES
FUSION BLACK TURBO FUSION RED TURBO
82 durometer. Recommended for paint protection films 95 durometer. Super hard, recommended for thick vinyl
and films with a softer hard coat. applications and window films.
FUSION GREEN TURBO FUSION YELLOW TURBO
80 durometer. Recommended for paint protection films 85 durometer. Recommended for vinyl applications and
and films with a softer hard coat. areas that require more pressure.
FUSION PINK TURBO FUSION ORANGE TURBO
77 durometer. Super soft, recommended for paint 92 durometer. (Same durometer as Orange Crush)
protection films and cleaning. Recommended for most window films and vinyl
applications.
TOOL TIP
FUSION TURBO SIZES AND HANDLE OPTIONS: GT2086 5 1/2” Blade only
GT2083 3 1/2” Blade only GT2087 5 1/2” Blade with small white pvc handle
GT2083-4 4” Blade only (Black only) GT2088 5 1/2” Blade with large gray pvc handle
GT2084 3 1/2” Blade with small white pvc handle GT2089 8” Blade only
GT2085 3 1/2” Blade with large gray pvc handle GT2090 8” Blade with small white pvc handle
GT2085-4 4” Blade with large gray pvc handle (Black Only) GT2091 8” Blade with large gray pvc handle
20INSTALLATION ACCESSORIES
INSTALLATION ACCESSORIES
GT033
GT191
GT130 GASKET WIZARD GT944 AUTOMOTIVE GLASS GT033 RED DEVIL SQUEEGEE
This device is used to carefully pull EDGE TRIMMER Flexible squeegee that is great
back gaskets for easy film-to-glass Use along the top edge of roll for tight corners and maneuvering
installations below the gasket. Rub down windows for a precise “micro- around gaskets.
rails are located at the base of all edge” finish (1/8”). Use GT137 as a
automotive door window glass and replacement blade. GT191 THE EDGE TOOL
are used for weatherproofing the A convenient trim guide or use the
openings between the glass and the curved edge to pull back gaskets.
door structure. Many installers find the
Gasket Wizard helpful, even without
the use of the bungee cords.
TOOL TIP
Tinting automotive windows is
progressively more challenging. View the
different tools to assist you in “tucking”
the film under the door panel.
GT135
GT134
GT132 HOOK TOOL GT135 BLADEATER GT1004 OLFA DC4 BLADE DISPOSAL
Use this tool to pull back on rubber Designed for professional installers, Blade disposal unit that can be
gaskets to tuck film below the seal. the BLADEater holds your knife safely emptied and reused.
and securely, and allows you to easily
snap and discard blades into the
replaceable well. Once the well is full,
simply toss the well, blades and all.
TOOL TIP
GT134 BLADEATER You don’t want to leave behind discarded
REPLACEMENT WELL blades on a job site for a potential injury
Replacement well for BLADEater. later. Safely snap blades into a disposal unit.
SS-MINI SS-OG
GT194
GT194B
GT176 SS-XL SS-INSTALLER
GT1080
GT194 GASKET PUSH STICK GT176 WAIST APRON SS-MINI SOAK SHIELD-MINI
GT194B BLUE GASKET PUSH STICK Heavy-duty waist apron for easy SS-OG SOAK SHIELD-ORIGINAL
access to tools while on the job. SS-XL SOAK SHIELD-XL
SS-INSTALLER SOAK SHIELD-INSTALLER SET
GT1080 ERGODYNE WAIST APRON Soak Shield is tucked between the glass
13 pocket tool apron. and the deck to reduce the chances
of water damage to electronic parts
during film installation. SS-OG is 5-6’ long
depending on stretching. SS-XL is 18”
longer than the SS-OG for larger SUVs
and trucks. SS-Mini is the same length as
GT2029 SHANK
the OG only 30% thinner.
Shank is a great tool for getting under
tight moldings.
21INSTALLATION ACCESSORIES
INSTALLATION ACCESSORIES
GT251N WAGNER HT3500 GT250 FURNO 300 DUAL TEMP HEAT GUN GT2122 FUSION AFTERBURN TAPE
DIGITAL HEAT GUN Furno 300 Dual Temp Heat Gun with This amazing product is self-adhering,
This model allows you to heat shrink high, medium, low settings. (120 volt) meaning it bonds to itself with no
in low or high fan speeds and has a adhesive. When it’s removed, there
variable temperature setting to fine is no leftover glue residue. Apply it to
tune the amount of heat needed for anything and everything! Torch tips,
a specific application. (120 volt) heat guns, tools, steamers, and more!
The list is endless! This tape stretches up
to 300% and molds perfectly to odd
shaped items. High heat resistance up
to 500 degrees Fahrenheit (about 260
degrees Celsius) with only one layer
applied. Double or triple your layers to
increase your level of heat resistance
and protection!
GT921C
GT921B
GT979 KEVLAR HEAT GLOVES (PAIR) GT921C JIFFY STEAMER J2W GT270 MAX FLUX HEAT GUN
Heat-resistant gloves great for use REPLACEMENT BOTTLE The Fusion Max Flux Heat Gun is the
during heat shrinking. Replacement bottle for the J2W Jiffy first heat gun specifically designed for
Steamer (GT921). the window film industry. Offers a style
that fits perfectly in the nook of your
GT921B JIFFY STEAMER J2W arm for precision handling. The 26 CFM
REPLACEMENT FUSE gives you the ability to spread the heat
exactly where you need it. With an
adjustable heat guage from 750 - 1000
degrees (Fahrenheit) this heat gun is a
good choice for any job. Includes a full
GT271 MAX FLUX HEATING ELEMENT
roll of Fusion Afterburn Tape in the box
Heating element replacement for the
and pre-installed! (120 volt)
Max Flux Heat Gun.
GT2015 JIFFY STEAMER J4000W STEAMBLADE
The J4000W has a large 1 gallon internal water reservoir
and provides 2 hours of continuous steam before refilling.
Go from PREHEAT mode to full steam power in just two
minutes. Has a flexible 7.5’ hose for easy maneuverability
on the job and an angled 9” aluminum steam head that
concentrates steam into a targeted area for precise
removal. Steam- resistant nitrile gloves included in each
unit. Heats up to 180°F (120 volt; alternate voltage
available upon request).
GT2015 GT921
GT921 JIFFY STEAMER J2W FILM REMOVER
Impact resistant, with a 1300 watt heating element and
heats up in two minutes with 2 hours of steaming per
filling. Great for removing film and adhesive from vehicle
rear windows. Heats up to 165°F (120 volt; alternate
voltage available upon request).
TOOL TIP
Jiffy Steamer will help prevent damaging defroster lines when
removing film from rear windows. Besides making life easier, a
Steamer will pay for itself in just a few jobs when you consider the
considerable time savings.
22MEASURE/MARK & TRIM
MEASURE/MARK & TRIM
GT190GRY GT190W
GT190BLK
GT991
GT990
GT190GRY GRAY 5-WAY TRIM GUIDE GT991 1” RED FILM TAPE DOTRIX DOT MATRIX VINYL 16”X50’
GT190BLK BLACK 5-WAY TRIM GUIDE GT990 3/8” RED FILM TAPE Gives the dot matrix area on cars a
GT190W WHITE 5-WAY TRIM GUIDE Features low-tack adhesive. smooth finished look. Pressure sensitive
Use these tools as a trim guide or wrap Use to retape film rolls for storage. adhesive requires no heat shrinking.
in paper towels and use as a bump (60.1 yards per roll)
tool. Each of these offers unique
shapes and corners. The GT190 White
even features a ruler. TOOL TIP TOOL TIP
In addition to a trim guide, the GT190 Whether you’re a novice or a
5- Way Tools are also an effective professional, dot matrix on rear glasses
squeegee, especially when wrapped are difficult to contend with for installers
with a low lint paper towel or cloth to worldwide. Try the “Dotrix” product for
absorb moisture along the border of the most problematic areas.
the film.
GT158
GT981
GT157
GT078-75
GT1096 GT078
GT159
GT157 1/2” BLACK OUT TAPE GT981 DO NOT ROLL DOWN STICKER GT078-75 3/4” BLACK ACRYLIC FELT
GT158 1” BLACK OUT TAPE Perfect as a reminder on new auto GT078 1 1/2” BLACK ACRYLIC FELT
GT159 1 1/2” BLACK OUT TAPE installs. Features low-tack adhesive. Helps reduce scratching of
Black matte vinyl used to hide light (1000 per roll) automotive films on some vehicle roll
gaps along edges of film installations. down windows. (50’ per roll)
(150’ per roll) GT1096 DO NOT ROLL DOWN TAPE
Approximately 200 stickers per roll.
GT076 GT075
GT077
GT2031
GT076 FILM OPAQUER PEN - GT075 YELLOW FILM MARKER
THIN POINT GT2031 WHITE FILM MARKER TOOL TIP
Handy for 3 basic purposes: Application of felt tape has become
GT077 FILM OPAQUER PEN - 1. Marking film prior to installation a popular solution to the familiar
BROAD POINT of windows with unusual shapes “scratching” problem on some vehicle
Used by installers to hide fine line (arches, trapezoids, etc.) which roll down windows.
mistakes in trimming which causes must be cut to approximate shape
light intrusion at the film edge. before the final “lay-up”.
2. Circling a contaminant (hair or
fiber) before pulling back the film to
remove it.
3. Marking film edges to check for
glass movement on side roll-ups
during the trimming process. Yellow
grease mark easily wipes away.
GT187
GT186
GT187 12” TRIANGLE GT182 36” STRAIGHT RULER
45/90° with circle templates. Imperial measurements including
1/8ths & 1/16ths.
GT186 8” TRIANGLE
30/60° with circle templates.
23SPRAYER & ACCESSORIES
SPRAYER & ACCESSORIES
GT096
GT1067 GT1067R
GT1008
GT090 SPRAYMASTER GT096 POLYSPRAY 2 GT1067 MERCURY PRO+
BOTTLE & TRIGGER This pressurized spray bottle holds BOTTLE & TRIGGER
An overall heavy-duty sprayer, this more solution than the 32 oz. bottles The next generation in spray bottles,
spray bottle comes with a 5 year and reduces “finger-fatigue” the Mercury PRO+ features viton seals
manufacturers warranty and is eliminating the need for pumping and a double action pump that sprays
chemically resistant. It is equipped with while spraying via a simple trigger. both when you pull back and when
a strong trigger and holds 32 ounces. Handy for large windows and long you release the trigger giving you more
duration sprays. Has an adjustable liquid with each pull. This lightweight
spray nozzle. (1.25 liters) ergonomic trigger/bottle combo holds
up to 1 liter (33 ounces) of fluid.
GT1008 IMPACT JR.
PUMP-UP SPRAYER GT1067R MERCURY PRO + SUPER
GT097
Pressurized spray bottle that holds 48 300 SPRAYER
GT098N ounces and reduces “finger-fatigue” 360 degree sprayer that allows
eliminating the need for pumping continual spray at all angles, sideways
while spraying via a simple trigger. Has or even upside down which uses up all
adjustable spray nozzle. the product in the container. Double
GT097 32OZ. BOTTLE
action trigger for a constant fine spray.
Empty 32 ounce bottle only.
Viton® seals are resistant to most
common chemicals and detergents.
GT098N MAXI TRIGGER SPRAYER
Level indicator embossed on container
An industry staple. Ergonomic trigger
marked in ML and pints.
with high output and durability.
GT101N
GT1029
GT1038-HG
GT101-H
GT1038 GT101-HG
GT1038-HG GILMORE NOZZLE & GT101N 5 GALLON SS TANK GT101-H REPLACEMENT SPRAY GUN
HOSE ASSEMBLY GT1029 3 GALLON SS TANK Replacement nozzle for GT101N and
15’ flex line hose and Gilmore nozzle Deluxe pressure sprayer for mounting GT1029. (Does not fit GT1038-HG hose)
assembly for 3 and 5 gallon stainless solution in a stainless steel tank. Hose
steel tanks. can reach up to 25’ in length. Fill with GT101-HG 25’ REPLACEMENT HOSE
solution and pressurize with air from AND SPRAY GUN
GT1038 GILMORE NOZZLE any compressor. Curly, flexible hose Replacement hose and nozzle
Use with flex line hose. reaches into cars or stretches to go up assembly for GT101N and GT1029.
(Does not fit on GT101-HG hose) a ladder with you.
GT101G 5 GALLON SS TANK
This pressure sprayer has a 15’ flex line TOOL TIP
hose with a brass tip nozzle. The no
Always clean your tanks and sprayers after
curl hose allows for less tension when 48 hours of use to keep contamination
maximizing the reach. A great sprayer down. Don’t forget to clean the filters!
for any type of installation.
24You can also read
