The Easy Air TM Connect Purifier - Instruction Book - LAP158
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
the Easy Air TM
Connect Purifier
Instruction Book - LAP158• Keep the power cord out of • Do not route power cord
Contents IMPORTANT heavy traffic areas. To avoid
fire hazard, never put the cord
under furniture or appliances.
• Do not operate the air purifier
SAFEGUARDS under rugs, near heat registers, with a damaged power cord
2 Breville Recommends Safety First READ ALL radiator, stoves or heaters. or plug, or if the air purifier
6 Components • To protect against electrical has been dropped or
INSTRUCTIONS BEFORE damaged in any manner.
7 Control Panel hazards, do not immerse in
8 Features
USE AND SAVE FOR water or other liquids. Do Take the air purifier to your
8 Assembly FUTURE REFERENCE not use the air purifier in the nearest Breville service centre
9 Functions • Remove and safely discard immediate surroundings of for examination, electrical
10 Wi-Fi Connectivity any packaging material and a bath, a shower or or mechanical adjustment
11 Care, Cleaning & Storage promotional labels before using a swimming pool. or repair.
13 Troubleshooting the air purifier and filter for the • Children should be supervised • Do not use the air purifier
first time. to ensure they do not play with with an external timer,
• To eliminate a choking hazard the air purifier. programmer or any other
BREVILLE for young children, remove and • Always turn off and unplug
device that switches the air
purifier on automatically
RECOMMENDS safely discard the protective the air purifier before moving, since a fire risk may exist if
SAFETY FIRST cover fitted to the power plug
of this air purifier.
opening the grill, changing
filters, cleaning or whenever
the air purifier is covered or
At Breville we are very safety positioned incorrectly.
conscious. We design and
• When unpacking the air the air purifier is not in use. • Do not place anything on
manufacture consumer purifier, check to see you have • Do not unplug the air purifier top of the air purifier when
products with the safety of you, received all the items listed in by pulling on the power cord. assembled, when in use and
our valued customer, foremost the parts list, before discarding Always unplug using the when stored.
in mind. In addition, we ask that the packaging. power plug.
you exercise a degree of care • This air purifier is intended for • Never block the air openings,
and adhere to the following
• Never insert fingers, pencils or grills/outlets or place on a soft
household use only and not for any other objects through the surface such as a bed or sofa,
precautions. commercial or industrial use. guards whenever the power as this could cause the unit to
• Do not use outdoors. plug is connected, in particular, tip over, blocking the air inlet
SPECIFICATIONS
• Always ensure the air purifier is while the air purifier is or outlet opening.
Filter Life Approx. 6 months
properly assembled before use. switched on.
Microbe Shield Life Approx. 10,000 hours
Follow the instructions provided
TM
• Do not run the power cord
Product Dimension 194 x 321mm
in this book. under carpeting or cover the
For Room Size 15 to 25m²
Noise Level 30~60dB
• Do not place the air purifier power cord with rugs, runners
Power Consumption 12W
near the edge of a bench or or the like. Arrange the power
Weight 2kg
table during operation. Ensure cord away from traffic areas
OS Compatibility Android® 5.0 or later and
the surface is level, clean and and where it will not be
iOS 9.0 or later free of water. tripped over.
2 3• Do not attempt to repair • Do not let the power cord Breville Service Centre for source at the wall socket
or adjust any electrical or hang over the edge of a bench examination and/or repair. to prevent any electrical
mechanical functions on or table, touch hot surfaces or • Any maintenance other than surges that may arise during
this unit. Doing so will void become knotted. cleaning should be performed the storm and which may
your warranty. Other than the • To protect against electric at an authorised Breville inadvertently cause damage
filter, the inside of the unit shock, do not immerse the Service Centre. to the appliance and its
contains no user serviceable power cord, power plug or • This appliance is for electronic componentry.
parts. All servicing should appliance in water or any household use only. • Always turn the appliance to
be performed by qualified other liquid or allow Do not use this appliance the off position, switch off at
personnel only. moisture to come in contact for anything other than its the power outlet and unplug
• This air purifier contains a with the part, unless it is intended use. Do not use in at the power outlet when the
UV-C emitter. recommended in the cleaning moving vehicles or boats. appliance is not in use.
instructions. Do not use outdoors. • Before cleaning, always turn
• Unintended use of the
appliance or damage to the • The appliance is not Misuse may cause injury. the appliance to the off
housing may result in the intended for use by persons • The installation of a residual position, switch off at the
(including children) with current device (safety switch) power outlet, unplug at the
escape of dangerous UV-C reduced physical, sensory or power outlet and remove the
light radiation. UV-C light is recommended to provide
mental capabilities, or lack of additional safety protection power cord, if detachable,
radiation may, even in little experience and knowledge, from the appliance and allow
doses, cause harm to the eyes when using electrical
unless they have been given appliances. It is advisable all parts to cool.
and skin. supervision or instruction that a safety switch with • Do not place this appliance
• Keep the air purifier and concerning use of the a rated residual operating on or near a heat source, such
dust filters clean. Follow appliance by a person current not exceeding as hot plate, oven or heaters.
the cleaning instructions responsible for their safety. 30mA be installed in the • Position the appliance at a
provided in this book. • Children should be electrical circuit supplying minimum distance of 20cm
supervised to ensure that the appliance. See your away from walls, curtains and
IMPORTANT they do not play with the electrician for professional other heat or steam sensitive
appliance. advice. materials and provide
SAFEGUARDS • It is recommended to • During electrical storms, adequate space above and on
FOR ALL regularly inspect the the appliance should be all sides for air circulation.
appliance. To avoid a hazard, disconnected from the power
ELECTRICAL do not use the appliance if
APPLIANCES power cord, power plug or
appliance becomes damaged
• Fully unwind the power cord in any way. Return
before use. the entire appliance to
• Connect only to a 230V or the nearest authorised FOR HOUSEHOLD USE ONLY
240V power outlet. SAVE THESE INSTRUCTIONS
4 5Components Control Panel
A
B
TURBO
2H 4H 8H NIGHT LOW MED HIGH
C C D
B
TIMER IC R L SPEED
D
M
O B E S HIE
D
FILTER
RESET
A
E
F
G
A. Control Panel G. Locking Knob A. Power On/Off/Wi-Fi and Filter Reset C. Timer
B. Main Housing Body Button (up to 8 hours)
NOT PICTURED B. Microbe Shield /Night Mode
TM D. Fan Speed
C. Air Inlet (includes 4 speed modes; Low, Medium, High and Turbo)
D. Microbe Shield UV-C Light and Light Guard
TM
Air Outlet
E. 3-Layer Filter Adaptor Inlet Socket
F. Base Plate Adaptor Plug
6 7Night Mode
Features Assembly Functions • To turn on Night Mode, press the
Shield /NIGHT MODE button until the
TM
Microbe
Night indicator light starts to blink.
• After 10 blinks, all indicator lights on
YOUR BREVILLE AIR PURIFIER BEFORE FIRST USE OPERATING YOUR AIR PURIFIER the control panel will turn off as the unit
Your Breville Easy Air Connect Purifier
TM • Remove and safely discard any packaging 1. Press the POWER button to turn on enters night mode and the fan speed will
improves your indoor air quality using 4 material or promotional labels attached to and the POWER symbol light will automatically change to Low.
distinct levels of protection. your air purifier and filter. illuminate. • Press any button on the control panel to
• Remove the filter from the air purifier re-engage the control panel and turn off
2. The air purifier will begin operation. night mode. The Night indicator light will
3-LAYER, HEAVY-DUTY FILTER: (see REPLACING THE FILTER on page 12)
and take it out of the plastic bag. Then 3. The air purifier will begin operation in the extinguish.
1. A Pre-Filter last setting selected, including Night mode
re-insert the filter into the air purifier.
Captures larger airborne particles such as and Timer. FAN SPEED/TURBO MODE
human hair, pet dander and dust particles. • Select a flat and level location for the
air purifier. 4. To adjust how the air purifier operates, follow
2. A True HEPA Filter the directions below. NOTE
• For proper air flow, locate the unit at least
Traps up to 99.97% of allergens and 20cm from any wall or furniture.
airborne contaminants down to 0.3 microns • If the Wi-Fi has been activated prior to The air purifier will resume in the last
• Ensure the air inlet and outlets are not resetting the filter, press and hold the programmed setting once it has been turned
in size. These include dust, mould spores,
blocked before use. POWER button for 5 seconds again and the off, even if turned off at the power outlet. If the
plant spores, and pollen. Wi-Fi light will illuminate to indicate that Wi-
• Ensure the filter has been fitted correctly as last programmed setting was Night mode, once
3. An Activated Carbon Membrane per the instructions in this book. Fi has been
turned on, the control panel will illuminate
Along with assisting in the capture of re-activated.
• Plug the adaptor into a 230V–240V power with the Night indicator light blinking as a
dust, smoke, pollen and other airborne outlet and connect to the adaptor inlet of the
Microbe Shield /NIGHT MODE
TM reminder that Night mode has been set.
allergens, the activated carbon membrane air purifier. Turn on the power outlet.
helps to neutralise odours in the home and The Microbe Shield and Night Modes utilise
TM
• Press the FAN SPEED button repeatedly
to eliminate fumes emitted by household IMPORTANT the same button on the control panel. Pressing until the desired speed is illuminated on the
products as well as other volatile organic the Microbe Shield /NIGHT MODE button
TM
control panel.
compounds (VOC’s) that might be found When moving the air purifier, always lift the
will cycle through these two settings. • There are 4 fan speeds: Low, Medium, High
unit using two hands and set down gently on
in the air. a flat and level surface. and Turbo.
4. Microbe Shield Technology
TM Microbe Shield TM
• The purifier has reached Turbo mode when
Microbe Shield technology uses a
TM
IMPORTANT • Press the Microbe Shield /NIGHT MODE
TM
all three lights are illuminated on the control
shortwave UV-C light specially designed button until the Microbe Shield indicator
TM
panel at the same time.
Do not use any other AC adapter other than light illuminates to turn it on.
to target germs and bacteria from the the one provided with the unit.
incoming air as it passes through the air • Press the button repeatedly until the light NOTE
purifier before releasing the air back into extinguishes to turn off this function.
the surrounding area. The Microbe Shield When changing the fan speed, the unit may
TM
function can be turned on and off according take a few seconds to adjust.
to preference.
8 9TIMER CONNECT YOUR PURIFIER TO WI-FI
• The air purifier can be set to operate for Wi-Fi 1. Ensure the mobile device is connected to a Care, Cleaning
timed intervals of 2 hours, 4 hours and 8
hours, stopping automatically when the Connectivity home Wi-Fi network.
& Storage
selected operating time has elapsed. 2. The purifier must be turned on via the
The Breville Easy Air Connect Purifier can
TM
control panel. Once on, the symbol
• If no timer is set, the air purifier will offer remote operation by using a home Wi-Fi The air purifier and filter should be cleaned at
will flash fast on the display panel. The air least once every month. Ensure the air purifier
continuously operate until the unit is connection and the Breville Home Connect™
manually switched off. purifier is now ready to connect. is switched off and disconnected from the
app downloaded to a compatible mobile phone
through the Google Play store or Apple App 3. Log into your Breville Home Connect™ power outlet and allow all parts to cool before
• Press the TIMER button repeatedly until cleaning or storing.
the desired interval hours are illuminated on store. app account and stay on the “Home” page.
the control panel. To go straight to the appropriate app store, To add the purifier to the list, touch ‘Add • Use a clean, dry cloth to clean all external
scan the QR code below. Device’ or the symbol found in the top surfaces of the air purifier.
• For continuous operation, press the
TIMER button repeatedly until there are no right-hand corner of the screen. Follow the
lights illuminated under the timer intervals. prompts in the app. NOTE
More frequent cleaning may be required
FILTER RESET depending on environmental conditions.
• The filter reset light will illuminate red BREVILLE RECOMMENDS
indicating that the filter needs to be replaced.
• Always ensure the air purifier is turned
• Replace the filter according to the directions off, switched off at the power outlet and
found under Replacing the Filter in this book. unplugged and allow the unit to cool
• Once the filter is replaced, press and hold the For instructions on how to use the app, scan the before performing any cleaning or filter
POWER button for 5 seconds to reset the QR code below, refer to the Quick Start Guide replacement.
Filter Reset light. that can be found in the box or go to
• The built-in timer for the filter reset is 4,320 tinyurl.com/HomeConnectQuickStart. 8 DO NOT stick any foreign objects or your
fingers inside the air inlet/outlet of this unit.
operating hours.
• If the Wi-Fi is connected, while the reset filter 8 DO NOT use gasoline, benzine, thinner,
light is reset, the Wi-Fi will need to be harsh cleaners, etc. on and/or in the unit
re-activated. Press and hold the POWER while cleaning as they will damage the unit.
button until the light illuminates on the
Wi-Fi icon.
8 NEVER use alcohol or other solvents
on this unit.
NOTE FILTER CLEANING AND REPLACING
For best performance, the filter should be
cleaned at least monthly as per the instructions NOTE WARNING
found in the Care, Cleaning & Storage section
of this book. The Breville Home Connect™ app is The filter is not washable. Do not immerse any
compatible with mobile phones running part of the air purifier in water as it will cause
Android® 5.0 or later and iOS devices 9.0 4. If the connection is successful, the purifier damage.
or later. will appear in the main page of the app
and the symbol on the purifier will • The Pre-filter should be cleaned at least once
NOTE illuminate. every month using a vacuum cleaner. Gently
5. If connection is unsuccessful, touch and vacuum using a hand-tool attachment such
To control the purifier using the app, the as a brush or upholstery tool. Clean more
purifier must be plugged into an active power hold the button for 5 seconds until often if required.
outlet. the light is flashing slowly. Follow the
prompts in the app to connect in a different • Do not use any solutions, hard bristle
brushes or sharp objects to clean as this
mode. can cause damage.
• Replace the filter as indicated using the
instructions following.
10 11REPLACING THE FILTER
NOTE
Your Easy Air Connect Purifier filter should
Troubleshooting
TM
be replaced in the time frames indicated below. There is no top or bottom on the filter. The
filter can be placed into the unit either way.
• The filter life is approximately 6 months
if used 24 hours daily, or 12 months if used
12 hours daily. NOTE
MINI TROUBLESHOOTING GUIDE
• The filter life may vary to this timing, If the filter is not in place or not fitted correctly,
the air purifier will not operate. Before carrying out any of the following service
depending on environmental conditions. checks, unplug the unit from the mains.
• Remove all packaging from the replacement
filter and place the filter into the unit as WARNING PROBLEM WHAT TO DO
described below. Unintended use of the air purifier or damage
1. Carefully turn your air purifier upside down to the housing may result in the escape of Unit will not start. • Check that the power plug is connected to a power outlet
dangerous UV-C radiation which is dangerous and the outlet is turned on.
and remove the locking knob from the base
to the eyes and skin. Never operate the UV-C • Check that air purifier is assembled correctly.
of the unit.
light outside of the air purifier. • Check that the filter is fitted correctly in place.
2. Remove the base plate.
3. Remove the used filter, being careful that UV-C LIGHT CARE Insufficient air flow. • Check that the filters are clean.
any residue or debris that may fall from the The replacement of the UV-C light must be • Check for any obstructions in the air inlet and/or outlet.
filter will not cause damage. undertaken at an authorised Breville service
centre. Please contact Breville Customer
Excessive noise. • Check for any foreign objects that may be in contact with the fan.
4. Insert the replacement filter into the unit,
Service Centre for further support. • Check if the filter is clogged and ready for replacement.
ensuring that it is correctly fitted and
centred.
• Check that the air purifier has been assembled correctly
and the locking knob has been tightened.
REPLACEMENT FILTERS
5. Replace the base plate and refasten the
Replacement filters must be purchased from
• Check that the unit is on a level surface.
locking knob.
6. Return the air purifier to an upright
the Breville website^ or at participating retail
outlets.
UV-C Light not • Contact Breville service centre for UV-C light replacement.
illuminating
position.
See the table below for the replacement
7. Turn on the air purifier then press and product code to suit this Breville Air Purifier.
hold the POWER button for 5 seconds
to reset the Filter Reset light. Breville Air Purifier Filter Replacement
Model No. Product Code
8. If the Wi-Fi is connected, while the reset
filter light is reset, the Wi-Fi will need to be the Easy Air Connect
TM
LAP015WHT
re-activated. Press and hold the again LAP158WHT
until the light illuminates on the Wi-Fi icon.
the Smart AirTM Connect LAP030WHT
LAP308WHT
the Smart Air PlusTM Connect LAP050WHT
LAP508WHT
^Delivery charges may apply.
Please contact Breville Customer Service
Centre for further support.
Only use the original Breville filter specially
intended for this appliance. Do not use any
other filters.
12 13NOTE NOTE 14 15
Breville Customer Service Centre
Australian Customers New Zealand Customers
Phone: 1300 139 798 Phone: 0800 273 845
Web: www.breville.com Web: www.breville.com
Breville, the Breville logo, Master Every Moment, Easy Air, the Breville Home Connect and the
Microbe Shield logo are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2020.
Due to continued product improvement, the products illustrated/photographed in this booklet
may vary slightly from the actual product.
LAP158 ANZ B20You can also read
