SYNTHETIC RESIN FLOORING SYSTEMS - Monothlic Low VOC Antimicrobial Properties Chemical Resistant Cleanability - Miracote
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
M I R A F L O R
SYNTHETIC RESIN FLOORING SYSTEMS
Monothlic • Low VOC • Antimicrobial Properties • Chemical Resistant • Cleanability
MiraFlor CQ Pigmented
A thin film, two-component, 100% solids resinous material. Optional Topcoat (STD- CQ Clear,
It is designed for stand alone application, in conjunction with MID- Glazetop 85)
broadcast aggregates, or as a base coat for Miraflake systems.
Advantages: CQ Pigmented coat 2
• Virtually free of VOC
• Rapidly installed at a moderate cost CQ Pigmented coat 1
• Monolithic
• Resistant to many chemicals
• Slip-resistant with aggregate broadcast
• Durable - withstands repeated scrubbings
Where to use:
• Institutional, commercial and retail sanitary flooring areas
• Food prep and food service
• Laboratories and clinics
• Toilet rooms
• Pet care facilities
• Garage floors
MiraFlor Flake System
A decorative seamless epoxy flooring system with vinyl chips Topcoat (STD- CQ Clear,
broadcast into it. It consists of a primer, opaque or pigmented MID- Glazetop 85)
epoxy receiving coat, broadcast colored vinyl chips and a clear
epoxy or urethane topcoat. Flake Broadcast
CQ Pigmented
Advantages:
• Rapidly installed at a moderate cost
• Monolithic - integral cove base helps eliminate bacteria
• Resistant to many chemicals
• Slip-resistant
• Optional waterproof membrane
Where to use:
• Home garages
• Auto show rooms
• Retail stores
• Restaurants (not kitchens)
• Schools
• Churches
MiraFlor Quartz Broadcast
A durable thin section monolithic decorative flooring system that
Topcoat (STD- CQ Clear,
consists of colored quartz granules embedded in a MiraFlor CQ
MID- Glazetop 85)
Clear epoxy resin. Wide array of color combination possible.
Quartz Broadcast
CQ Clear
Advantages:
Quartz Broadcast
• Rapidly installed at a moderate cost
CQ Clear
• Monolithic - integral cove base helps eliminate bacteria
• Resistant to many chemicals
• Skid-resistant
• Optional waterproof membrane
Where to use:
• Large public foyers, lobbies, hallways and passageways
• Laboratories and clinics
• Food service and concession areas
• Toilet rooms
MiraFlor Glazetop 85
A high solids, UV stable, aliphatic elastomeric polyaspartic coating
that is formulated for low odor installation with a working time of Glazetop Clear 85
25 minutes, and a hard dry in 6 hours. Glazetop FC (Fast Cure) is (Clear or Pigmented)
available when a quick cure time and return to service are essential.
Glazetop 85 Clear is used as a stand-alone topcoat for all resinous Primer (Clear or Pigmented)
flooring systems where Performance and UV stability are critical.
Substrate
Advantages:
• Fast cure with low odor
• High elongation and tear strength
• Excellent abrasion resistance
• Displays excellent UV resistance
• High gloss finish
Where to use:
• Food and beveragle service areas
• Entryways and foyers
• High traffic areas
• Cold storage areas
• Parking decks, promenade decks and roof decks
MiraFlor MVERS Plus
A fluid-applied, one-coat moisture mitigation system consist-
ing of uniquely modified resinous epoxy and other chemical
compounds. It will withstand very high moisture vapor emission Mvers Plus
rates (MVER) and is the perfect choice for most all varieties of Substrate
floor coverings. MiraPrime MVERS Plus FC (Fast Cure) is available
when a quick cure time and return to service are essential.
Advantages:
• Under slab vapor retarders not required
• Quick cure time and low odor & zero VOC
• High compressive, flexural and tensile strengths
• Excellent resistance to 14 pH
• Excellent adhesion to damp concrete
• In compliance with ASTM F3010-13
Where to use:
• Under resinous floor coatings
• Under resilient floor coverings
• Under carpet tile
• Under wood flooring
MiraFlor WB A two-component, chemically resistant, water-based epoxy Miraflor WB coat 2 (Available in floor coating system available in gloss and satin formulations. Clear, Matte, Satin, or Pigmented) Advantages: • Can be applied over “green-concrete” Miraflor WB coat 1 (Available in • VOC compliant Clear, Matte, Satin, or Pigmented) • Slip resistance enhancement with synthetic aggregate • Recommended for interior application Substrate • ADA Compliant, for in-situ validate ADA Compliance use a Variable Incident Tribometer Machine • LEED Credit Points may be available under 5 different Classifications • Does not contain chemicals targeted by Green Seal Standard GS-11 and LEED-CS as unacceptable • Available through Miracote distributors Where to use: • Institutional • Commercial • Light to moderate manufacturing environments MiraFlor Metallux A unique architectural, high-solids, resinous floor coating that Metallux Coat 1 utilizes metallic and pearlescent powder integral pigments to produce brilliant and dynamic designer effects. Substrate Advantages: • Limitless distinctive designs and color variations • Superior chemical and abrasion resistance • Wide range of metallic colors and resin choices • Blend two or more pigments to create hybrid colors • Lower maintenance and life cycle costs vs. other flooring types • LEED-compliant, low odor and fast cure time • Meets USDA, FDA, OSHA standards • Superior resin clarity, color retention and UV stability Where to use: • Retail malls and stores • Commercial offices and reception areas • Restaurants, lounges and night clubs • Entertainment and dining facilities • Automotive and show room floors • Fitness centers and locker rooms • Cafeterias and food service facilities • Residential basements and garage floors
M i r a To p U r e t h a n e C e m e n t
A state-of-the-art, three-component, aliphatic urethane- Urethane Cement Sealer
modified cementitious concrete sealer designed for use as a
topcoat over MiraTop Flooring Systems. Broadcast Aggregate
Advantages: MiraTop Urethane
• Tenacious adhesion to concrete and most substrates Cement Resin
• Excellent chemical and abrasion resistance
• Outstanding color retention and UV stability Substrate
• LEED-compliant, low odor and fast cure time
• Meets USDA, FDA, OSHA requirements
• Does not support microbial growth
• Very rapid cure and minimal down time
• Withstands MVER exceeding 22 lbs./99% RH
Where to use:
• Production facilities
• Food processing plants
• Chemical processing areas
• Pharmaceutical plants and warehouses
• Commercial kitchens
• Cleaning and sanitation areas
• Water and wastewater treatment facilities
• Fountains, water features and aquatic environments
MiraCide
MiraCide Antimicrobial can be integrated with an array of MiraFlor and MiraTop flooring systems. Instead
of using chemicals, MiraCide leverages the all-natural power of silver ions to penetrate cell membranes of Bacterial Resistance: MiraCide
bacteria and kill the pathogen. Common bacterium have no defense against it. The system works continually, CoV (Covid19) •
giving you added protection between cleaning cycles.
SARS •
Based on the active agent N-butyl-1, 2- benzisothiazolin-3-one (BBIT), it is specially formulated to protect Salmonella Typhi •
flooring in tough and demanding environments, especially those exposed to high levels of moisture, UV light,
Staphylococcus Aureus •
or unsanitary conditions. The silver ion producing additive is integrated throughout the floor coating matrix -
not just the surface, so scratches and other points of wear do not create a place where pathogens can create Streptococcus Pygenes •
a home to grow and spread. The antimicrobial does not wash or wear away, preserving the protective proper-
ties for the life of the floor. MRSA •
E-coli •
Advantages: Where to use: Listeria Welshimeri •
• Works continually • Food Processing
• All-natural solution uses silver ions instead of chemicals • Beverage Processing Pseudomonas Aeruginosa •
• Added protection between cleaning cycles • Pharmaceutical Campila Bacta •
• Eliminates up to 99.9% of bacteria • Manufacturing
• Homogeniously distributed throughout floor matrix - not just the surface • Chemical Processing C.difficile •
• Seamless and easy to clean • Pulp & Paper Plants
• Impervious, non-porous • Hospitals & Clinics Proteus Vulgaris •
• Durable and hard wearing • Laboratories Entercoccus Faecalis •
• Chemical, heat and impact resistant • Commercial Kitchens
• Provides broader array of protection than antibacterials • Restaurants & Cafeterias
• Withstands high UV exposure • Locker Rooms
• Suitable for exterior or interior use • Public Restrooms Standards:
• Helps control odors generated by microbe action • Manufacturing Facilities
• ISO 22196
• Fire, Rescue & Public
• Safety Facilities • ISO JIS 222801
• Technology Centers • FSANZ
COLOR CHARTS:
M I R A F L O R
Standard Color Chart for
Standard Color Chart Efor• U • W
M1246 / M1248 / M1252 / M1254 / M1384 / M1388 /
Epoxy • Urethane • Polyaspartic • ColorPax
Base Coat: Speedway Gray Base Coat: Bright Gray Base Coat: Bright Gray Base Coat: Bright Gray Base Coat: Sandpiper Beige Base Coat: Speedway Gray
Standard Color Chart for
Standard Color Chart
M1394 /
Base Coat: Bright GrayEpoxyfor
• Urethane • Polyaspartic • ColorPax E •
M1364 /
Base Coat: Bright Gray
M1368 /
Base Coat: Speedway Gray
M1372 /
Base Coat: Bright Gray
M1356 /
Base Coat: Sandpiper Beige
M1358 /
Base Coat: Sandpiper Beige
xy • Urethane • Polyaspartic • ColorPax E • U • W
Q U A R T Z A G G R E G A T E
The following 6 colors 303
will be stocked at all Miracote locations.
Standard
Standard Color
IVORY
Color Chart
CREAM
Chart for for
211 GREEN 413 SPEEDWAY GRAY
• Urethane • Polyaspartic • ColorPax E • U • W
DFS-B-13 DFS-B-07 DFS-B-05 DFS-B-03 DFS-B-09 DFS-B-12
andard Color ChartEpoxy
for • Urethane • Polyaspartic • ColorPax 211
303 IVORY CREAM GREEN
E•U•W
413 SPEEDWAY GRAY
The following 6 colors413
RY CREAM
Epoxy • Urethane • Polyaspartic • ColorPax E • U • W
will SPEEDWAY
be made to order,
GRAY please allow 5-7211
day business
GREEN days for production
Standard ColorColor
Standard
304 SANDPIPER BEIGE
ChartChart
for for
431 BRIGHT GRAY 720 MEDIUM BLUE
DFS-B-01 DFS-B-04 DFS-B-06 DFS-B-08 DFS-B-10 DFS-B-89
e • Polyaspartic • ColorPax E • U • W
CREAM 413 SPEEDWAY GRAY 211 GREEN
S O L I D C O L O R S
Epoxy • Urethane
Epoxy •431Urethane • Polyaspartic
• Polyaspartic • ColorPax
• GRAY E •GRAY
ColorPax UE••W U
211 • W 720
304 SANDPIPER BEIGE 431 BRIGHT MEDIUM BLU
303 IVORY CREAM 413 SPEEDWAY GRAY GREEN
NDPIPER BEIGE 303 IVORY
BRIGHTCREAM
GRAY 413
720SPEEDWAY
MEDIUM BLUE 211 GREEN
413 Speedway Gray 431 Bright Gray 410 Silver Bullet 402 Dark Gray 499 Graphite 300 Bolsa
503 ADOBE 402 DARK GRAY 607 BRICK RED
413
PER SPEEDWAY GRAY
BEIGE 211 GREEN
431 BRIGHT GRAY 720 MEDIUM BLUE
ALSO AVAILABLE IN BLACK, WHITE, SAFETY RED AND SAFETY YELLOW.
303 Ivory Cream 304 Sandpiper
Color charts Beige 503 Adobe
approximate actual color. Final color appearance 211lighting,
607 Brick Red is affected by Green 720 Medium
surface texture andBlue
method of
application. Final color approval should be made from physical sample. Individual products may not be available in both
ALSO AVAILABLE IN BLACK, WHITE,
gloss and SAFETY
matte RED
finishes. AND your
Consult SAFETY YELLOW. for other colors and combinations. Depending on product selection,
Representative
303 IVORY CREAM a Clear Gloss413 SPEEDWAY
or Clear Matte top GRAY
coat may be required 211 GREEN
to achieve the desired look.
303 IVORY CREAM 503413 SPEEDWAY GRAY
ADOBE 402211
DARKGREENGRAY 607 BRICK RED
Printed colors approximate actual
304color. Actual color BEIGE
SANDPIPER should be approved based431upon actual samples
BRIGHT GRAY or draw downs of the selected
720 color and
MEDIUM material
BLUE
OBE 304
402 SANDPIPER
DARK GRAY BEIGE 431
607 BRIGHT
BRICK GRAY
RED 720 MEDIUM BLUE
sample. Final color appearance is affected by lighting, surface texture, profile, method of application and sealer selection.
Contact
ALSO AVAILABLE us today
IN BLACK, forSAFETY
WHITE, more information!
RED AND SAFETY YELLOW.
AILABLE IN BLACK, WHITE, SAFETY
West Coast • Rancho Dominguez, CA
RED• (310)
(310) 886-9100
Color charts
AND886-9119
SAFETY fax YELLOW. www.miracote.com East Coast • Roselle Park, NJ
approximate actual color. Final color appearance is affected by lighting, surface texture
(908) 245-2800 • (908) 245-0659 fax
application. Final color approval should be made from physical sample. Individual products may not be a
rts approximate actual color. Final color appearance is affected by lighting, surface texture and method of
gloss and matte finishes. Consult your Representative for other colors and combinations. Depending on pro
n. Final color approval should be made from physical sample. Individual products may not be available in both #543
a Clear Gloss or Clear Matte top coat may be required to achieve the desired look.
matte finishes. Consult your Representative for other colors and combinations. Depending on product selection,
oss431 miracote.com
BRIGHT
or Clear GRAY
Matte top • 402
coat miracote@cpcmail.net
may be required
DARK GRAY 720
to • West
MEDIUM
achieve Coastlook.
BLUE
the desired (310) 631-6594
607 BRICK RED• Central (210) 888-0449 • East Coast (908) 245-2800
Contact us today for more information!
ABLE IN BLACK, WHITE, SAFETY RED AND SAFETY YELLOW.
West Coast • Rancho Dominguez, CA East Coa
You can also read
