PRODUCT CATALOGUE - SALUS Smart Home
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PRODUCT CATALOGUE 2021
SMART HOME SOLUTIONS
map of compatible products 4-7
SMART HOME series 8 - 18
FC series Fan coil thermostat 19
UNDERFLOOR HEATING
WIRED SYSTEM
map of compatible products 20 - 21
EXPERT NSB series 22 - 23
EXPERT HTR series 24 - 25
EXPERT series 26 - 27
THB actuator 28
OTHER THERMOSTATS
OPENTHERM thermostats 29
Internet thermostats for boilers 30 - 31
STANDARD series 32 - 39
Programmable timers 40
Weather controllers 41
PC series 41 - 43
ICONS DESCRIPTION:
New product in the offer 5 years warranty ACCESSORIES
2 x AA alkaline batteries power supply 1 x CR123 (3V) alkaline battery power supply ZigBee wireless communication PMV valves 44
2 x AAA alkaline batteries power supply 230V AC 50Hz power supply 868MHz wireless communication Magnetic filters 45
4 x AAA alkaline batteries power supply 24V AC 50Hz power supply Wired communication Others 46 - 47
1 x CR2 (3V) alkaline battery power supply 5V DC power supply Voltage free contacts
Technical data and wiring diagrams 48 - 63
1 x CR3032 (3V) alkaline battery power supply Li-Ion 3,7V battery power supply Work in ONLINE or OFFLINE mode
Smart Home elements
SALUS MAP OF COMPATIBLE PRODUCTS
Smart Home ONLINE MODE
PS600 RS600 \ SR600 SD600 WLS600
p. 16 p. 15 p. 16 p. 16
INTERNET
GET IT ON
UGE600
p. 8
Download on the
MS600 SB600 SW600 SPE600
p. 17 p. 16 p. 15 p. 15
UNDERFLOOR heating RADIATOR heating
SQ610RF SQ610 VS10WRF / VS10BRF VS20WRF / VS20BRF HTRP-RF(50) HTRS-RF(30) HTR-RF(20) TS600 SQ610RF SQ610 VS10WRF / VS10BRF VS20WRF / VS20BRF HTRP-RF(50) HTRS-RF(30) TS600
p. 9 p. 9 p. 10 p. 10 p. 11 p. 11 p. 11 p. 10 p. 9 p. 9 p. 10 p. 10 p. 11 p. 11 p. 10
230V AC power supply 230V AC power supply
TRV radiator heads
KL08RF KL04RF RX10RF
p. 12 p. 12 p. 14
Boiler connection wire 2 x 1 mm2 (additionally)
Actuator connection wire Pump connection wire TRV10RFM TRV28RFM TRV10RAM
2 x 0.75 mm2 2 x 1 mm2 p. 14 p. 14 p. 14
T30NC230 THB23030 PUMP (additionally) BOILER
p. 13 p. 13
4 5
MAP OF COMPATIBLE PRODUCTS
OFFLINE MODE
OR
CO10RF UGE600
p. 18 p. 8
UNDERFLOOR heating RADIATOR heating
SQ610RF SQ610 VS10WRF / VS10BRF VS20WRF / VS20BRF HTRP-RF(50) HTRS-RF(30) HTR-RF(20) SQ610RF SQ610 VS10WRF / VS10BRF VS20WRF / VS20BRF HTRP-RF(50) HTRS-RF(30)
p. 9 p. 9 p. 10 p. 10 p. 11 p. 11 p. 11 p. 9 p. 9 p. 10 p. 10 p. 11 p. 11
230V AC power supply 230V AC power supply
TRV radiator heads
KL08RF KL04RF RX10RF
p. 12 p. 12 p. 14
Boiler connection wire 2 x 1 mm2 (additionally)
Actuator connection wire Pump connection wire
2 x 0.75 mm2 2 x 1 mm2 TRV10RFM TRV28RFM TRV10RAM
p. 14 p. 14 p. 14
T30NC230 THB23030 PUMP (additionally) BOILER
p. 13 p. 13
6 7
SALUS Smart Home app Quantum thermostat
SMART HOME
SQ610RF Surface-mounted, multi-functional thermostat with humidity sensor
Power supply Built-in Li-Ion 3,7V Battery
creative control in your hands
Temperature range 5 - 40ºC
615302602 and built-in Li-Ion battery. It is used for wireless control of devices from
the SALUS Smart Home series. Display temperature accuracy 0.5ºC or 0.1°C
Control algorithm ITLC, Hysteresis: ±0.25°C / ± 0.5°C, THB
Product advantages: Communication Wireless, ZigBee 2.4 GHz
• you can create your own temperature schedules S1/S2 multifunctional input: Floor temperature sensor
• it has a built-in humidity sensor External air sensor
• you can choose desired control algorithms: Occupancy sensor
ITLC, Hysteresis ± 0.5 ° C or ± 0.25 ° C, THB actuator One Touch rule trigger
Temperature control for each • thermostat has comfort WARM FLOOR function Heating/Cooling modes changeover
separate room • you can lock thermostat's buttons by the PIN and set limits for the Working temperature 0 - 45ºC
set temperature IP protection class IP30
• it has a multi-functional input: temperature sensor (floor or air), Dimension [mm] 86 x 86 x 11
occupancy sensor, OneTouch rules
• quick and easy to install at every stage of the investment
Simple control of SALUS Smart • mounted with screws with dowels or mounting tape (included in
Home series devices set)
86 mm
86 mm
Advanced thermostat functions
86 mm 11 mm
Quantum thermostat 230V
OneTouch rules creating
SQ610 Control:
• Online:
Power supply
Max curren
230V AC 50 Hz
3 (1) A
615302601 • wirelessly - using the SALUS Smart Home application and the Temperature range 5 - 40ºC
UGE600 universal gateway Display temperature accuracy 0.5ºC or 0.1°C
Notifications from the system • wired when the thermostat is directly connected to the receiver (e.g. Control algorithm ITLC, Hysteresis: ±0.25°C / ±0.5°C, THB
(e-mail, SMS) wiring centre) and when the SALUS Smart Home application with
the UGE600 gateway is used Communication Wireless, ZigBee 2.4 GHz
• Offline (without internet connection) - with the CO10RF coordinator use. S1/S2 multifunctional input: Floor temperature sensor
• Wired (without UGE600 internet gateway and without CO10RF External air sensor
coordinator), when the controller is directly connected to the (for e.g.) Occupancy sensor
One Touch rule trigger
NO FEES wired wiring centre Heating/Cooling modes changeover
(for any subscriptions or licenses) Product advantages: Output control COM / NO (volt-free)
• you can create your own temperature schedules Working temperature 0 - 45ºC
• it has a built-in humidity sensor, IP protection class IP30
• you can choose desired control algorithms:
GET IT ON Dimension [mm] 86 x 86 x 28
The SALUS Smart Home app is completely free of charge. ITLC, Hysteresis ± 0.5 ° C or ± 0.25 ° C, THB actuator
• valve protection
Thickness after mounting in a 10
It will allow you to control smart home devices with cooperation with • thermostat has comfort WARM FLOOR function
wall-box φ60 [mm]
Flush-mounted, multi-functional thermostat with• you can lock thermostat's buttons by the PIN and set limits for the set
UGE600 gateway. Thanks to them you can create rules via the Internet - humidity sensor. A unique feature of this thermostat is temperature
Download on the
from a mobile phone or computer (via a website). the possibility of WIRELESS control of SALUS Smart Home• it has a multi-functional input: temperature sensor (floor or air),
series devices and WIRED control of devices that connect occupancy sensor, OneTouch rules
86 mm
86 mm
directly to it (e.g. wiring centre, boiler). • mounting in a wall-box φ60
• works as a repeater, increasing the range of the ZigBee network
An example of the rule creating can be found on page 18.
86 mm 28 mm
Universal Gateway Charging station for SQ610RF and WQ610RF thermostats
UGE600 CDEU
615171220 615301030 This device is used to charge buil-in Li-On batteries of the SQ610RF and Power supply 5VDC (micro USB)
WQ610RF wireless temperature thermostats (sold separately) via the Max. load 200 mA
It’s the heart of SALUS Smart Home system. It connects all SMART HOME Power supply 5V DC USB port..
devices in one fully integrated system, which works according to the Port 1x10/100 LAN port
Dimensions [mm] 82 x 82 x 66
rules (created by You). Included:
Mounting Table or wall mounted
In set: LAN cord and power supply adapter.
RF Frequency ZigBee 2.4 GHz HA 1.2
• charging station
Product advantages: Dimension H=55.5 Ø=90 • power supply 230V / 5VDC
• using the SALUS Smart Home application, it enables wireless control • USB - micro USB cable (1.5 m, white color)
of compatible devices
• it is recommended to use up to 100 devices per one gateway NOTE: the station only supports the specified thermostats models.
• easy and quick to install
• you can connect it via Wi-Fi or a LAN cord Product features:
The gateway has a built-in ZigBee network coordinator. • time to fully charge SQ610RF and WQ610RF is 24h
Use it instead of the CO10RF coordinator. • the product is handy and easy to use
• docking station can be used also as a elegant stand with
90 mm
90 mm
minimalistic design
82 mm
82 mm
90 mm 55.5 mm 82 mm 66 mm
8 9
Wireless digital thermostat 230V Wireless digital thermostat
SMART HOME
VS10WRF / VS10BRF HTRP-RF(50)
615172642 / 615172640 615122626
Flush-mounted thermostat for wireless control of devices from the Power supply 230V AC 50 Hz Surface-mounted thermostat for wireless control of devices from the Power supply 2 x AA batteries
SALUS Smart Home series, such as: Temperature range 5 - 35ºC
SALUS Smart Home series, such as: Temperature range 5 - 35ºC
KL08RF wiring centre, TRV radiator head and RX10RF receiver. KL08RF wiring centre, TRV radiator head and RX10RF receiver.
Display temperature accuracy 0.5ºC Display temperature accuracy 0.5ºC
Control: Control algorithm TPI or Hysteresis: ±0.25ºC or ±0.5ºC Control: Control algorithm TPI or
• Online - using the SALUS Smart Home application and the UGE600 • Online - using the SALUS Smart Home application and the UGE600 Hysteresis: ±0.25ºC or ±0.5ºC
Communication ZigBee 2.4 GHz
universal gateway Dimesions [mm] 86 x 86 x 42
universal gateway Communication ZigBee 2.4 GHz
• Offline (without internet connection) - with the CO10RF coordinator • Offline (without internet connection) - with the CO10RF coordinator Dimension [mm] 85 x 85 x 25
use. In offline mode it can also work as a weekly or daily thermostat Thickness after mounting in a 16.5 use. In offline mode it works as a weekly thermostat.
or as a hot water timer (with RX10RF module). wall-box φ60 [mm]
Product advantages:
Product advantages: • cooperates with the other elements of the SALUS Smart Home series
• cooperates with the other elements of the SALUS Smart Home series • it has a TPI algorithm - a guarantee of precise temperature
• it has a TPI algorithm - a guarantee of precise temperature maintenance
maintenance • you can create your own temperature schedules
• you can create your own temperature schedules • it has an input for an additional temperature sensor (floor or air)
86 mm
86 mm
85 mm
85 mm
• it has an input for an additional temperature sensor (floor or air) or • you can connect it at any stage of the investment
occupancy sensor
• mounting in a wall-box φ60
Two colours version: black and white 86 mm 42 mm 85 mm 25 mm
Wireless digital thermostat Wireless digital thermostat
VS20WRF / VS20BRF HTRS-RF(30)
615172645 / 615172644 615122625
Surface-mounted thermostat for wireless control of devices from the Power supply 4 x AAA batteries Surface-mounted thermostat for wireless control of devices from the Power supply 2 x AA batteries
SALUS Smart Home series, such as: Temperature range 5 - 35ºC
SALUS Smart Home series, such as: Temperature range 5 - 35ºC
KL08RF wiring centre, TRV radiator head and RX10RF receiver. KL08RF wiring centre, TRV radiator head and RX10RF receiver.
Display temperature accuracy 0.5ºC Display temperature accuracy 0.5ºC
Control: Control algorithm TPI or Hysteresis: ±0.25ºC or ±0.5ºC Control: Control algorithm TPI or
• Online - using the SALUS Smart Home application and the UGE600 Communication ZigBee 2.4 GHz • Online - using the SALUS Smart Home application and the UGE600 Hysteresis: ±0.25ºC or ±0.5ºC
universal gateway Dimension [mm] 86 x 86 x 29 universal gateway Communication ZigBee 2.4 GHz
• Offline (without internet connection) - with the CO10RF coordinator • Offline (without internet connection) - with the CO10RF coordinator Dimension [mm] 85 x 85 x 25
use. In offline mode it can also work as a weekly or daily thermostat use. In offline mode it works as a daily thermostat.
or as a hot water timer (with RX10RF module).
Product advantages:
Product advantages: • cooperates with the other elements of the SALUS Smart Home series
• cooperates with the other elements of the SALUS Smart Home series • it has a TPI algorithm - a guarantee of precise temperature
• it has a TPI algorithm - a guarantee of precise temperature maintenance
maintenance • you can create your own temperature schedules
• you can create your own temperature schedules • it has an input for an additional temperature sensor (floor or air)
86 mm
86 mm
85 mm
85 mm
• it has an input for an additional temperature sensor (floor or air) or • you can connect it at any stage of the investment
occupancy sensor
• you can connect it at any stage of the investment
• cooperation with the Amazon ALEXA system
Two colours version: black and white 86 mm 29 mm 85 mm 25 mm
Temperature sensor Wireless digital thermostat
TS600 HTR-RF(20)
615171349 615122624
It is a surface-mounted sensor and a thermostat for wireless control Power supply 2 x AA baterries Surface-mounted room thermostat. The wireless control of heating Power supply 2 x AA batteries
of SALUS Smart Home devices. Installation and configuration are Temperature range 5 - 35°C
only with the KL08RF wiring centre. Temperature range 5 - 32.5ºC
carried out using the SALUS Smart Home application, the UGE600
Display temperature accuracy 0.5°C (only in the app) Display temperature accuracy 0.5ºC
universal gateway is also required for operation. In Online mode it can Control:
communicate with devices such as: KL08RF wiring centre, mini TRV Control algorithm TPI or • Online - using the SALUS Smart Home application and the UGE600 Control algorithm TPI or
radiator head, RX10RF receiver, SR600 smart relay and SPE600 smart Hysteresis: ±0.25°C or ±0.5°C universal gateway Hysteresis: ±0.25ºC
plug. Communication ZigBee 2.4 GHz • Offline (without internet connection) - with the CO10RF coordinator Communication ZigBee 2.4 GHz
Dimension [mm] 51 x 85 x 26 use. In offline mode it works as a daily thermostat. Dimension [mm] 80 x 80 x 35
Product advantages:
• has an input for an additional sensor (floor or air temperature) Product advantages:
• intuitive configuration of parameters in the application • cooperates with the other elements of the SALUS Smart Home series
• work according to schedules created in the application • it has a TPI algorithm - a guarantee of precise temperature
maintenance
• you can create your own schedules in the app
• you can connect it at any stage of the investment
85 mm
85 mm
80 mm
80 mm
51 mm 26 mm 80 mm 35 mm
10 11
Wiring centre, for 8 zones Thermal actuator - normally closed NC
SMART HOME
KL08RF* T30NC / T28NC*
615171432 T30NC 230V - 615211603 / T28NC - 615211500
Control: Model KL08RF KL08RF24V Actuators can be used e.g. with thermostatic valves in the manifold Model T30NC230 / T28NC230 T30NC24
• Online - using the SALUS Smart Home application and the UGE600 Power supply 230V AC 50 Hz 230V AC 50 Hz
for underfloor heating or with zone valves. They allow cutting off the Power supply 230V AC 50 Hz / 24V AC/DC
universal gateway heating medium supply to a given element. They can cooperate directly
Rating max 3A 2A Max. inrush current 200 mA / 200 ms 250 mA / 120 s
• Offline - with the CO10RF coordinator use (in set with the wiring with room thermostats or via wiring centres (wired or wireless).
centre) Inputs Heating/cooling changeover NC actuators are normally closed devices, which means that when Power consumption 2W
Dew point there is no current, the actuator closes the loop. The condition of the Type NC = Normally closed
Product advantages: Outputs Pump (NO/COM) actuator can be checked quickly thanks to the indicating element. Closing force 100 N (±10%)
• control of 8 independent heating zones Boiler (NO/COM)
• 24 outputs for connecting the actuators (3 per zone) Product advantages: Opening time about 2 min
Actuator outputs 230V 24V
The wiring centre works in a wireless connection with • works only with SALUS Smart Home series thermostats • faster installation thanks to the ‘FIRST OPEN’ function Adaptive stroke length [mm] 4
Communication ZigBee 2.4 GHz
thermostats of the SALUS Smart Home series. • adaptation for mounting on a 35 mm DIN rail • short opening time - about 2 min Thread's size M30x1.5 / M28x1.5
It has built-in pump and boiler control outputs - works Dimension [mm] 355 x 85 x 67 • it has adaptive stroke length - about 4 mm
Dimension [mm] 40 x 70 x 40
with NC or NO actuators. • it has small size
• consumes a small amount of power Power cord length [cm] 89
You can connect 9 KL08RF wiring centres in one ZigBee
network (Online or Offline).
85 mm
85 mm
70 mm
40 mm
*Available in 24V version - KL08RF 24V *Available in 24V version - T30NC 24V
615171433 355 mm 67 mm 615211606 40 mm 40 mm
Wiring centre extension for KL08RF Thermal actuator - normally opened NO
KL04RF T30NO
615171430 T30NO 230V - 615211608
The KL04RF module is an extension to the KL08RF wiring centre by Power supply 230V AC 50 Hz Actuators can be used e.g. with thermostatic valves in the manifold Model T30NO230 T30NO24
another 4 zones. It works only in connection with the KL08RF wiring Dimension [mm] 170 x 85 x 67
for underfloor heating or with zone valves. They allow cutting off the Power supply 230V AC 50 Hz / 24V AC/DC
centre - extends number of controlled zones up to 12. heating medium supply to a given element. They can cooperate directly
with room thermostats or via wiring centres (wired or wireless). Max. inrush current 200 mA / 200 ms 250 mA / 120 s
Product advantages: NO type actuators are normally open devices, which means that when Power consumption 2W
• adaptation for mounting on a 35 mm DIN rail there is no current, the actuator opens the loop. The condition of the Type NO = Normally opened
• works only with KL08RF wiring centre actuator can be checked quickly thanks to the indicating element. Closing force 100 N (±10%)
Product advantages: Opening time about 2 min
• short opening time - about 2 min Adaptive stroke length [mm] 4
• it has adaptive stroke length - about 4 mm Thread's size M30x1.5 / M28x1.5
• it has small size
Dimension [mm] 40 x 70 x 40
• consumes a small amount of power
Power cord length [cm] 89
85 mm
85 mm
*Available in 24V version - KL04RF 24V
70 mm
615171431
40 mm
*Available in 24V version - T30NO 24V
170 mm 67 mm 615211609 40 mm 40 mm
Auto balancing actuator
THB23030
615210214
Self-regulating actuator dedicated for underfloor heating. It has two Model THB23030 THB2430
temperature sensors that are installed on the supply and return of the
appropriate floor heating loop. Power supply 230V AC 50 Hz 24V AC/DC
It measures the temperature on the sensors and adjusts its operation Power consumption 0,5 W
to maintain the correct temperature difference between supply and Opening time 30 seconds
return (ΔT).
Protection class IP54
Product advantages: Thread's size M30 x 1.5
• easy to install on the manifold Dimension [mm] 93 x 38 x 54
• guarantees efficient heating even at different loop lengths Power cord length [cm] 93
• has 2 contact sensors for measuring the flow and return Sensor cord length [cm] 45
temperature in the heating loop
• short opening time (about 30 seconds)
• consumes a small amount of power (less than 0,5 W)
Fits the most popular M30x1.5 thread size.
93 mm
93 mm
*Available in 24V version - THB2430
615210215 38 mm 54 mm
12 12 13
Thermostatics radiator valve (TRV) Smart Plug
SMART HOME
TRV10RFM / TRV28RFM / TRV10RAM SPE600
615170712 / 615170713 / 615170710 615171350
The electronic thermostatic head is used to control the radiator Power supply 2 x AA batteries The intelligent plug is connected directly to the electric socket (as an Power supply 230V AC 50 Hz
heating. An excellent replacement for a traditional manual Communication ZigBee 2.4 GHz extension) - it gives the possibility to control the device plugged into it. Rating max 16 A
thermostatic head. For proper operation of the TRV head, it is necessary Thread size 10RFM - M30 x 1.5
It should be used together with the UGE600 universal gateway and the
Plug and Socket type EU Schuko
to synchronize it with a wireless thermostat using the CO10RF 28RFM - M28 x 1.5 SALUS Smart Home application.
coordinator or the UGE600 universal gateway (sold separately). The 10RAM - Danfoss RA Communication ZigBee 2.4 GHz
head paired with SALUS Smart Home series thermostats provides a Dimension [mm] 10RFM - 50 x 90 x 50 Product advantages: Dimension [mm] 42 x 77 x 42
feeling of warmth and comfort throughout the entire room, not just 28RFM - 50 x 90 x 50 • Amazon ALEXA voice control
the radiator. 10RAM - 50 x 102 x 50 • overload protection
Up to 6 heads can be paired with one thermostat • works as a repeater for ZigBee network
in one room. • measures the power consumption of connected devices
• has a programmable schedule in the application SALUS Smart Home
Product advantages: • history of energy consumption (as a chart in the Smart Home
• auto-fitting to the valve insert application)
• key lock (ideal when you have children)
102 mm
• antifreeze protection
90 mm
90 mm
TRV10RAM
77 mm
TRV10RFM
50 mm
TRV28RFM
42 mm
50 mm 50 mm 50 mm 50 mm
TRV10RFM TRV28RFM TRV10RAM 42 mm 42 mm
Tamper-proof housing for TRV heads Smart Relay / Roller shutter
TP10 / TP28-30 SR600 / RS600 Smart Relay SR600 is a remote-controlled device, designed to work in a
switch box, wall socket or where there is a need to control a receiver with a SR600
maximum load of 16A. It should be used together with the UGE600 universal
615171382 / 615171381 615171351 / 615173700 gateway and the SALUS Smart Home application.
Power supply 230V AC 50 Hz
Rating max 16 (5) A
Solid shields protecting TRV heads against theft or unnecessary Product advantages:
manipulation. Ideal for use in public buildings (e.g. schools, hospitals). Output NO/COM
• remote relay for voltage devices (boilers, pumps, valves, actuators, lighting
The TP10 model is designed for the TRV10RAM head - in set with and other 230V devices)
Inputs S1, S2
mounting screws and ABS plastic housing. • remote relay for voltage free devices Communication ZigBee 2.4 GHz
Model TP28-30 is designed for TRV10RFM and TRV28RFM heads - in set • (alarm control panels, gate controllers, opening sensors and others) Dimension [mm] 45 x 45 x 20
with mounting screws, allen key and metal clamps. • works as a repeater for ZigBee network
• can be used as a "smart input" to the system (you can activate OneTouch RS600
Product advantages: rules) Power supply 230V AC 50 Hz
• fast and easy mounting • has a programmable schedule in the application SALUS Smart Home Rating max 5 (2) A
• theft protection TP10
Roller shutter RS600 controls drives of window blinds, curtains or lighting S1, S2 inputs 230V AC 50 Hz
TP10 with a maximum load of 5A. The device is factory prepared for controlling 230V SL1, SL2 outputs 230V AC 50 Hz
SR600 AC drives. Special operating modes can be programmed in the RS600 using Communication ZigBee 2.4 GHz
the SALUS Smart Home application, in which case it must be connected to the
Dimension [mm] 45 x 45 x 20
UGE600 universal gateway. It can work with various types of switches.
Product advantages:
• controls roller shutter drives - closing roller blinds throughout the house
45 mm
45 mm
(One Touch rule)
• controls lighting - works with different types of switches
• flush mounting or in SRS600 housing possible
TP28-30 • works as a repeater for ZigBee network housingage
TP28-30 Examples of use RS600 45 mm 20 mm
Heat source control module - receiver Window/door sensors (slim and standard)
RX10RF SW600 / OS600
615171354 615171384 / 615171357
The module is the executive element in the SALUS Smart Home system Power supply 230V AC 50 Hz The wireless sensor is used to signal the opening of windows / doors. SW600 power supply 1 x CR2
and is started on the basis of a heating signal from thermostats from Rating max 16 (5) A
It should be used together with the UGE600 universal gateway and the OS600 power supply 1 x CR3032
the same network. It can replace the wired connection between SALUS Smart Home application. In combination with thermostats, it
Output NO/COM Max. Magnet Gap (distance) 25 mm
KL08RF wiring centre and the boiler. In a system with heads, TRV is an automatically switches the heating off for ventilation time.
optional element that activates the heat source. Communication ZigBee 2.4 GHz Communication ZigBee 2.4 GHz
For RX10RF to work with SALUS Smart Home wireless thermostats, Dimension [mm] 145 x 100 x 35 Product advantages: SW600 Dimension [mm] Sensor: 22 x 70 x 20
it must be used together with the CO10RF coordinator (Offline) or • free status change notifications (SMS, @) Magnet: 11 x 41 x 10
the UGE600 universal gateway (Online) and the SALUS Smart Home • history of open/close states in the SALUS Smart Home application OS600 Dimension [mm] Sensor: 55 x 40 x 12
application. Magnet: 55 x 16 x 12
The module can work as a receiver:
• groups of thermostats (RX1 mode) - reacts to the command
to heat any thermostat in the ZigBee network (heat source
control)
70 mm
70 mm
• one thermostat (RX2 mode) - reacts to the command
55 mm
55 mm
100 mm
100 mm
to heat only one thermostat in the ZigBee network
41 mm
41 mm
(controlling one zone or hot water timer in combination SW600
with thermostats VS10..RF / VS20..RF)
22 mm 11 mm 20 mm 10 mm 40 mm 16 mm 12 mm
WS600 WS600 OS600
145 mm 35 mm OS600
14 15
Water leak sensor Motion sensor
SMART HOME
WLS600 MS600
615170401 615171386
The sensor is used to detect the presence of water on the surface under Power supply 1 x CR2 MS600 is a motion detector. The sensor requires the UGE600 internet Power supply 1 x CR123A
the sensor or on the contacts of wires connected to the sensor. Communication ZigBee 2.4 GHz
gateway and SALUS Smart Home application. Through the application Communication ZigBee 2.4 GHz
Depending on the needs, it can be placed horizontally or vertically. The we can remotely monitor motion in the room and receive SMS/email
External sensor length 2m Detection distance 8 meters
wires are attached to the sensor through a handle. WLS600 must be notifications. Thanks to the OneTouch rules and devices such as SPE600
used with the UGE600 universal gateway and the SALUS Smart Home Sensor Dimension [mm] H=25, Ø=55 or SR600, the motion sensor can switch ON/OFF any electrical device, Detection angle 80°
application. Case Dimension [mm] 60 x 66 x 30 e.g. switching on light after detection of movement on stairs. Dimensions [mm] 60.45 x 80.52 x 43.18
Product advantages: Product advantages:
• by connecting to the application, it gives you the opportunity to • up to 3 years of sensor operation on one battery
receive free notification of leakage and / or flooding (SMS, e-mail) • It supports the pet immunity function (up to 36 kg)
• is completely waterproof • OneTouch rules operation (e.g. when motion is detected after
• has various mounting options (accessories included) sunset, activate lighting for a certain period of time)
• works according to OneTouch rules (e.g. close the valve when you 25 mm
detect a water leak)
80,52 mm
Ø55 mm
66 mm
66 mm
60 mm 30 mm 60,45 mm 43,18 mm
Smoke detector Button - activator for OneTouch rules (single / double)
SD600 CSB600 / SB600
615170402 615171359 / 615171353
The sensor detects the presence of smoke in real time. It can be used as Power supply 1 x CR123A The wireless button is used to run OneTouch rules in the SALUS Smart Power supply 2 x AAA batteries
a stand-alone device (without the UGE600). Communication ZigBee 2.4 GHz Home system. For its operation, the UGE600 universal gateway and Communication ZigBee 2.4 GHz
the SALUS Smart Home application are required. It has the option of
Sound level ≥ 85dB CSB600 Dimension [mm] 59 x 66 x 27
Product advantages: receiving a free notification of the event (SMS, e-mail).
• alerts when a threat is detected (audible and visual alarm) Working temperature -10 - 50˚C SB600 Dimension [mm] 59 x 59 x 19
• synchronized with the UGE600 gateway and the SALUS Smart Home Humidity ≤ 95% CSB600 product advantages:
application, it gives the possibility to notify about the event (SMS Dimension [mm] 60 x 60 x 49 • has the ability to work as an emergency button - sending an SMS
and e-mail) notification
• functional warning system (to be used e.g. in hotels, warehouses) • it can be the switch of one event (OneTouch rules) - e.g. turn off
66 mm
66 mm
CSB600
heating, start the schedule, turn on the light for a specific time
• activation of one OneTouch rule without running the SALUS Smart
SB600 Home application
SB600 product advantages: 59 mm 27 mm
• can be a trigger for two events (OneTouch rules)
• activation of 2 different OneTouch rules without running the SALUS
60 mm
Smart Home application
59 mm
59 mm
• has the ability to work as a lighting switch and switch SB600
49 mm
CSB600
60 mm 60 mm 59 mm 19 mm
Wireless temperature sensor ZigBee network repeater
PS600 RE600 / RE10RF
615171387 615171355 / 615171356
The PS600 temperature sensor - in relation to the measured Power supply 1 x CR2 Repeater increases the ZigBee network signal range for SALUS Smart RE600
temperature - allows to control products connected to the SPE600 Wireless communication ZigBee 2.4 GHz
Home devices. The device is helpful in installations where distances Power supply 230V AC 50 Hz
smart plugs or SR600 smart relays e.g. pumps, valves, actuators etc. or obstacles (e.g. thick walls, metal elements) can impair wireless
Measuring range -50°C - 100°C Communication ZigBee 2.4 GHz
The large measuring range of the sensor is an important feature and connectivity.
offers a wide range of applications for heating, cooling, temperature Cable length 470 mm Dimension [mm] 45 x 45 x 20
monitoring and OneTouch events/rules trigger within the system. The Dimensions [mm] 73.5 x 24.7 x 20 RE600 can be used:
sensor requires the UGE600 internet gateway and SALUS Smart Home • Online - using the SALUS Smart Home application and the UGE600 RE10RF
application. universal gateway
Power supply 5V DC
Product advantages: RE10RF can be used: Dimension [mm] 54 x 26 x 20.7
• sensor probe is designed to be mounted on a 15-18mm pipe • Online - using the SALUS Smart Home application and the UGE600
• removable sensor buckle allows you to place it e.g. in a electrical universal gateway
conduit • Offline - with CO10RF coordinator
• works according to the OneTouch rules (e.g. switch off the pump,
when temperature drops below 25°C) RE600 Product advantages:
• increases the range of the ZigBee network
73,5 mm
73,5 mm
• recommended for a large number of battery devices
54 mm
54 mm
45 mm
45 mm
in the network
• The RE600 can be mounted in a subtle housing
(included), optionally in a φ 60 box
RE10RF • RE10RF has a power supply adapter included 45 mm 20 mm 26 mm 20.7 mm
24,7 mm 20 mm RE600 RE10RF
16 17
An elegant housing for mounting SR600 / RS600 / RE600 Tamper-proof housing for VS20WRF/VS20BRF thermostat Fan coil thermostat
SMART HOME
SRS600 VSTC FC600
615171383 615171380 615170500 Power supply 230V AC 50 Hz
Protective housing against theft or unnecessary
It allows mounting SR600, RS600 or RE600 products tampering with the VS20WRF / VS20BRF battery Multifunctional device designed to control 2 or 4-pipe fan coils, trench Rating max 5 (2) A
on a wall or ceiling. The handle also works as a heaters or water heaters, which have a built-in fan. The thermostat
FC600
Control outputs: 230 V AC 50 Hz
thermostat.
housing. controls the fan and valves to maintain the set temperature in the - Fan Speed control (I, II, III gear)
Product advantages: room. - Valve actuator (cooling/heating)
Product advantages: • made of plastic Temperature range 5 - 40°C
• device protection against external damage Product advantages: Display temperature accuracy 0.1°C or 0.5°C
• cords protection against pulling out • factory configured as daily, with the possibility of work as a weekly Communication ZigBee 2.4 GHz
• it can be controlled locally or via the Internet (using the SALUS
Smart Home application and the UGE600 gateway) Dimension [mm] 86 x 86 x 46
• has settings memory in case of power loss Thickness after mounting in wall 16.5
• works according to a previous set hysteresis or energy-saving TPI box φ 60 [mm]
control algorithm
• Amazon ALEXA voice control (temperature control)
• work as a repeater increasing the range of the ZigBee network
• mounting in a φ 60 mm wall box
107 mm
107 mm
86 mm
86 mm
84 mm
84 mm
84 mm 28 mm 90 mm 30 mm 86 mm 46 mm
External antenna for KL08RF wiring centre ZigBee network coordinator The module is designed for fans with an EC motor
08RFA CO10RF FC600-M 0-10V
Product advantages:
615171361 • increases the range of the communication signal 615171360 CO10RF coordinates the work of wireless 515251830
• enables quick assembly with a built-in magnet heating devices in offline mode. Necessary Module for fan coils, trench heaters or heaters with fans controlled by Power supply 24V DC
• simple and easy to install to create a ZigBee network. Provides wireless 0-10V signal. It complements the main controller SALUS FC600. The Inputs: 230V AC
control of all devices. One CO10RF can support module smoothly controls the fan speed by setting the control voltage - F1, F2, F3: Low/Medium/High fan speeds
Dimension [mm] H=131 Ø=29 up to 30 thermostats, 9 wiring centres and in the range of 0 ... 10V. The device controls two electric actuators - V1, V2: Valve inputs (heating and cooling)
Cord length [cm] 100 90 radiator heads. If there are more than (heating and cooling valve). Outputs:
Mounting magnetic 32 battery-powered devices in the network - Fan power supply 24V DC; 6.5 A
Plug SMA-K
(e.g. thermostats, thermostatic heads) or the Product advantages: - Fan control 0...10V
distances between devices cause connectivity • controls fans with EC motor - Valve outputs (heating and cooling) 24V DC; 1 A
problems, the system should be equipped with • converting the valves signal from 230V to 24V DC Mounting DIN rail 35 mm
an additional RE10RF repeater. • silent operation of the controlled device (thanks to smooth Dimension [mm] 51 x 90 x 65
adjustment between fan speeds)
Power supply 5V DC • has control inputs adapted for FC600 thermostat
Dimension [mm] 54 x 26 x 20.7
131 mm
1000 mm
90 mm
90 mm
54 mm
54 mm
29 mm
29 mm 29 mm 26 mm 20.7 mm 51 mm 65 mm
OneTouch rules They give you the freedom to create scenarios. Intuitive commands in the application make it easy to create the perfect
day. Know our system in practice. Look at some ready-made solutions and get inspired to create your own.
Morning 07:00
A nice morning will put you in a Set the temperature that best stimulates
you to actions.
Activate garden sprinkling. Back at home 17:00 Raise the temperature and turn on
the hot water pumps.
good mood for all day.
Prepare your home for your return:
automatically when you deactivate the
Gradually open the blinds and let the light Take care of hot water. alarm or sooner - from the SALUS Smart Enjoy the perfect temperature
into your home. Turn on the hot water timer. and hot water after returning. Raise the blinds.
Home application.
Out of home 08:30 Evening 22:00
A button that activates Nice evening and a peaceful sleep. Change the temperature to night time
Turn off lighting throughout the house. - economic.
everything with a single click. Bring them to your home.
Close the shutters according to your Save energy and turn off the
Turn on the sprinklers in the garden. Turn on outdoor lighting as the sun sets.
preferences hot water pump.
18 19PRODUCT ROADMAP WHICH THERMOSTATS YOU CAN
CONNECT WITH?
EXPERT NSB SERIES EXPERT HTR SERIES EXPERT SERIES EXPERT NSB SERIES EXPERT HTR SERIES EXPERT SERIES
VS30W / VS30B VS35W / VS35B BTRP230(50) BTR230(20) HTRP230(50) HTRS230(30) HTR230(20) RT10 VS30W / VS30B VS35W / VS35B BTRP230(50) BTR230(20) HTRP230(50) HTRS230(30) HTR230(20) RT10
p. 22 p. 22 p. 25 p. 25 p. 24 p. 24 p. 24 p. 26 p. 22 p. 22 p. 25 p. 25 p. 24 p. 24 p. 24 p. 26
Supply Supply
230V AC 230V AC
Power supply cord 4 x 0.75 mm2 Power supply cord 4 x 0.75 mm2
KL08NSB KL04NSB (optional) KL06-M PL07 PL06
p. 23 p. 23 p. 27 p. 27 p. 27
Actuators control cord Pump control cord Boiler control cord Actuators control cord Pump control cord Boiler control cord
2 x 0.75 mm2 2 x 1 mm2 2 x 1 mm2 2 x 0.75 mm2 2 x 1 mm2 2 x 1 mm2
T30NC230 THB23030 PUMP (optional) BOILER T30NC230 THB23030 PUMP (optional) BOILER
p. 28 p. 28 p. 28 p. 28
Detailed wiring diagrams on pages: 48-63.
20 21Wired digital programmable thermostat Wiring centre, for 8 zones
VS30W / VS30B KL08NSB
615132931 / 615132930 615131403
Flush-mounted thermostat dedicated for surface heating / cooling Power supply 230V AC 50 Hz Product advantages: Power supply 230V AC 50 Hz
control, characterized by high thermal inertia. It is connected to the Rating max 3A
• control of 8 independent heating zones Rating max 3A
wiring centre. It has the function of creating your own schedules. • 32 outputs for connecting the actuators (4 per zone)
Output signal 230V AC 50 Hz Outputs Pump (NO/COM)
It can control daily thermostats - via wiring centre it sends them • has the ability to connect an external clock Boiler (NO/COM)
an NSB signal and switches them to economic temperature. Then Temperature range 5 - 35°C • it can be expanded with a KL04NSB module UFH thermal actuators (230 V)
the time schedule is common to all thermostats (according to the Display temperature accuracy 0.5°C • the ability to control the boiler and pump operation
Dimension [mm] 355 x 85 x 67
NSB SERIES
weekly thermostat), while temperatures are set individually on each Control algorithm PWM or • it has a protection for wires against breaking out
thermostat. Hysteresis: ±0.25°C or ±0.5°C • adaptation for mounting on a 35 mm DIN rail
Communication Wired
Product advantages:
Dimension [mm] 86 x 86 x 42
• has a PWM control algorithm The wiring centre allows easy and quick connection
• protection against too high or too low temperature using an of wired thermostats and actuators by the PLUG-IN
additional FS300 floor sensor method. It has an integrated pump and boiler control
• valve protection function module and overload protection. The wiring centre is
• an input for the additional temperature sensor adapted to work with NC (normally closed) and NO
• has frost protection mode (normally opened) actuators.
86 mm
86 mm
85 mm
85 mm
• working with actuators of both types - NC and NO
• mounting in a φ 60 mm wall box
*Available in 24V version - KL08NSB 24V
615131405
Two colour versions: black and white The thermostat works with the KL08NSB or KL06-M (230V) wiring centre. 86 mm 42 mm 355 mm 67 mm
Wired digital thermostat - non-programmable Wiring centre extension for KL08NSB
VS35W / VS35B KL04NSB
615132933 // 615132932 615131400
Concealed room thermostat dedicated for surface heating / cooling Power supply 230V AC 50 Hz The module is an extension to the KL08NSB wiring centre with another Power supply 230V AC 50 Hz
control, characterized by high thermal inertia. It is connected to the Rating max 3A
4 heating zones. Increases the functionality of the combined set to 12 Dimension [mm] 170 x 85 x 67
wiring centre. The thermostat does not have the function of creating individually controlled heating zones.
Output signal 230V AC 50 Hz
schedules - it lowers the set temperature via wiring centre after
receiving the NSB signal from the weekly thermostat. Temperature range 5 - 35°C Product advantages:
Display temperature accuracy 0.5°C • it can only work with the KL08NSB wiring centre connection
Product advantages: Control algorithm PWM or • 4 additional heating zones and 16 outputs for actuators
• has a PWM control algorithm Hysteresis: ±0.25°C or ±0.5°C • has the ability to connect an external clock
• protection against too high or too low temperature using an Communication Wired • it has a protection for wires against breaking out
additional FS300 floor sensor • adaptation for mounting on a 35 mm DIN rail
Dimension [mm] 86 x 86 x 42
• valve protection function
• an input for the additional floor sensor
• working with actuators of both types - NC and NO
• mounting in a φ 60 mm wall box
The thermostat works with the KL08NSB or KL06-M (230V) wiring centre.
86 mm
86 mm
85 mm
85 mm
*Available in 24V version - KL04NSB 24V
615131406
Two colour versions: black and white 86 mm 42 mm 170 mm 67 mm
22 23Wired digital thermostat - programmable Wired, flush-mounted, digital thermostat - programmable
HTRP230(50)* BTRP230(50)
615122922 615122911
Surface-mounted (or on a flush-box) thermostat dedicated for surface Model HTRP230(50) HTRP24(50) Flush-mounted room thermostat for installation in a 55x55 mm frame Power supply 230V AC 50 Hz
heating / cooling control, characterized by high thermal inertia. It is Power supply 230V AC 50 Hz 24V AC 50 Hz
dedicated for surface heating / cooling control, characterized by high Rating max 0.5 A
connected to the wiring centre. It has the function of creating your own thermal inertia. It is connected to the wiring centre. It has the function
Rating max 0.5 A 1.5 A Output signal 230V AC 50 Hz
schedules. It can control daily thermostats - via wiring centre it sends of creating your own schedules. It can control daily thermostats - via
them an NSB signal and switches them to economic temperature. Output signal 230V AC 50 Hz 24V AC 50 Hz wiring centre it sends them an NSB signal and switches them to Temperature range 5 - 35°C
Then the time schedule is common to all thermostats (according to the Temperature range 5 - 35°C economic temperature. Then the time schedule is common to all Display temperature accuracy 0.5°C
weekly thermostat), while temperatures are set individually on each Display temperature accuracy 0.5°C thermostats (according to the weekly thermostat), while temperatures Control algorithm PWM or Hysteresis: ±0.25°C or ±0.5°C
thermostat. Control algorithm PWM or Hysteresis: ±0.25°C or ±0.5°C
are set individually on each thermostat. Communication Wired
Product advantages: Communication Wired Dimension [mm] 71 x 71 x 46
• absolutely silent operation (TRIAC) Dimension [mm] 85 x 85 x 25 Product advantages:
• has a PWM control algorithm • absolutely silent operation (TRIAC)
HTR SERIES
• protection against too high or too low temperature using an • has a PWM control algorithm
additional FS300 floor sensor • protection against too high or too low temperature using an
• protection of thermostatic valves against stagnation (VP) additional FS300 floor sensor
• an input for the additional temperature sensor • protection of thermostatic valves against stagnation (VP)
85 mm
85 mm
• has frost protection mode • an input for the additional temperature sensor
71 mm
71 mm
• has frost protection mode
• mounting in a φ 60 mm wall box
*Available in 24V version - HTRP24(50) The HTRP230 (50) thermostat works with KL08NSB or KL06-M (230V) wiring centres
615122924 The HTRP24 (50) thermostat works with the KL0624V wiring centre 85 mm 25 mm
The thermostat works with the KL08NSB or KL06 (230V) wiring centres 71 mm 46 mm
Wired digital thermostat - non-programmable Wired, flush-mounted, electronic thermostat - non-programmable
HTRS230(30) BTR230(20)
615122921 615122910
Surface-mounted (or on a flush-box) room thermostat dedicated Zasilanie 230V AC 50 Hz Flush-mounted room thermostat for installation in a 55x55 mm frame Power supply 230V AC 50 Hz
for surface heating / cooling control, characterized by high thermal Power supply 0.5 A
dedicated for surface heating / cooling control, characterized by high Rating max 0.5 A
inertia. It is connected to the wiring centre. The thermostat does not thermal inertia. It is connected to the wiring centre. The thermostat
Output signal 230V AC 50 Hz Output signal 230V AC 50 Hz
have the function of creating schedules - it lowers the set temperature does not have the function of creating schedules - it lowers the set
via wiring centre after receiving the NSB signal from the weekly Temperature range 5 - 35°C temperature via wiring centre after receiving the NSB signal from the Temperature range 5 - 30°C
thermostat. Display temperature accuracy 0.5°C weekly thermostat. Control algorithm PWM or Hysteresis: ±0.5°C
Control algorithm PWM or Hysteresis: ±0.25°C or ±0.5°C Communication Wired
Product advantages: Communication Wired
Product advantages: Dimension [mm] 71 x 71 x 53
• absolutely silent operation (TRIAC) • absolutely silent operation (TRIAC)
• has a PWM control algorithm Dimension [mm] 85 x 85 x 25 • has a PWM control algorithm
• protection of thermostatic valves against stagnation (VP) • changes the temperature according to the weekly thermostat
• has frost protection mode command
The HTRP230 (30) thermostat works with KL08NSB or KL06-M (230V) wiring centres
• protection of thermostatic valves against stagnation (VP)
• mounting in a φ 60 mm wall box
The thermostat works with the KL08NSB or KL06 (230V) wiring centres
85 mm
85 mm
71 mm
71 mm
85 mm 25 mm 71 mm 53 mm
Wired electronic thermostat - non-programmable
HTR230(20)* CHOOSE
YOUR STYLE
615122920
Surface-mounted (or on a flush-box) room thermostat dedicated for Model HTR230(20) HTR24(20)
surface heating / cooling control, characterized by high thermal inertia. Power supply 230V AC 50 Hz 24V AC 50 Hz
It is connected to the wiring centre, through which you can lower
Rating max 0.5 A 1.5 A
the set temperature on it, receiving a signal NSB (night temperature
reduction) from the weekly thermostat. Output signal 230V AC 50 Hz 24V AC 50 Hz
Temperature range 5 - 30°C
Product advantages: Control algorithm PWM or Hysteresis: ±0.5°C
• absolutely silent operation (TRIAC) Communication Wired
• has a PWM control algorithm
• has the function of lowering the NSB temperature at night Dimension [mm] 85 x 85 x 30
• protection of thermostatic valves against stagnation (VP)
The HTRP230 (20) thermostat works with KL08NSB or KL06-M (230V) wiring centres
The HTRP24 (20) thermostat works with the KL0624V wiring centre
85 mm
85 mm
*Available in 24V version - HTR24(20)
615122923 85 mm 30 mm Berker, Ospel and Simon frames were used for the photos.
24 25Wired electronic thermostat - non-programmable 230V wiring centre (6 zones) with pump module
ERT2024V KL06 + PL06
615112972 615111404
Surface-mounted room thermostat dedicated for surface heating / Power supply 24V AC 50 Hz The set consists of a 230V wiring centre together with pump or boiler Wiring centre:
cooling control, characterized by high thermal inertia. Rating max 10 (3) A
control module. Power supply 230V AC 50 Hz
It is connected to a 24V wiring centre. Via wiring centre it is possible Rating max 2 (1) A
Output signal 24V AC 50 Hz
to lower the set temperature on it, receiving a signal NSB (night Product advantages: Outputs Thermoelectric actuators (230V)
temperature reduction) from the weekly thermostat. Temperature range 5 - 30°C • control of 6 independent heating zones
Control algorithm Hysteresis: ±0.5°C • 24 outputs for connecting the actuators (4 per zone) Dimension [mm] 300 x 86 x 63
Product advantages: • convenient installation of wires by using the PLUG-IN method Module:
Communication Wired
• has a PWM control algorithm Dimension [mm] 80 x 80 x 35
• adaptation for mounting on a 35 mm DIN rail Power supply From KL06 wiring centre
• valve protection function • has integrated overload protection Rating max 5 (2) A
• easy to install and easy to use • possible selection of which zone starts the module first Output signal NO/COM/NC
• has a knob backlight when it is sending a signal to work • very easy and quick module mounting in the wiring centre
Dimension [mm] 60 x 80 x 20
The thermostat works with the KL0624V wiring centre
80 mm
80 mm
86 mm
86 mm
80 mm
71 mm
EXPERT SERIES
80 mm 35 mm 60 mm 20 mm 300 mm 63 mm
Wired electronic thermostat - non-programmable Boiler and pump control module for KL06 wiring centre
RT10230V* PL07
615112920 615111806
Surface-mounted (or on a flush-box) room thermostat dedicated for Model RT10230V RT1024V The PL07 module increases the capabilities of the KL06 wiring centre. Power supply From KL06 wiring centre
surface heating / cooling control, characterized by high thermal inertia. Power supply 230V AC 50 Hz 24V AC 50 Hz
It is used to control the circulation pump and the boiler by means of Rating max 5 (2) A
It is connected to the wiring centre. Via wiring centre it is possible voltage-free COM / NO output contacts. The COM / NO contacts close
Rating max 10 (2) A 10 (3) A Output signal 2 x NO/COM
to lower the set temperature on it, receiving a signal NSB (night when any of the thermostats connected to the wiring centre indicate
temperature reduction) from the weekly thermostat. Output signal 230V AC 50 Hz 24V AC 50 Hz heat demand. Otherwise, output COM/NO relay contacts are opened. Dimension [mm] 70 x 80 x 20
Temperature range 5 - 30°C
Product advantages: Control algorithm PWM or Hysteresis: ±0.5°C
Product advantages:
• has a PWM control algorithm • very easy and quick assembly into the wiring centre
• protection of thermostatic valves against stagnation (VP) Communication Wired • individual pump and boiler control
• easy to install and easy to use Dimension [mm] 75 x 75 x 25 • adaptation to work with both voltages - 230V and 24V of KL06
The RT10230V thermostat works with KL08NSB or KL06-M (230V) wiring centres
The RT1024V thermostat works with the KL0624V wiring centre
80 mm
80 mm
75 mm
75 mm
*Available in 24V version - RT1024V
615112921 75 mm 25 mm 70 mm 20 mm
Wiring centre, for 6 zones Pump or boiler control module for KL06 wiring centre
KL06-M* PL06
615111401 615111805
Product advantages: Model KL06-M KL0624V The PL06 module increases the functionality of the KL06 wiring centre. Power supply From KL06 wiring centre
• control of 6 independent heating zones Power supply 230V AC 50 Hz 24V AC 50 Hz
It is used to control the circulation pump (or boiler) with the potential- Rating max 5 (2) A
• 24 outputs for connecting the actuators (4 per zone) free NC / COM / NO output contacts. The COM / NO output closes when
Rating max 2 (1) A Output signal NO/COM/NC
• the ability to control the boiler and pump operation (via PL06/PL07 any of the thermostats connected to the terminal has a demand for
module sold separately). Output signal 230V 24V heat. Otherwise, output COM/NO relay contacts stay opened. Dimension [mm] 60 x 80 x 20
Dimension [mm] 300 x 86 x 63
KL06-M and KL0624V wiring centres has adaptation for mounting on a Product advantages:
Supply 24V version:
35 mm DIN rail. • very easy and quick assembly into the wiring centre
Power supply 230V AC 50 Hz • possible selection of which zone starts the module first
KL0624V wiring centre in the set has included a transformer Output voltage 24V AC 50 Hz • adaptation to work with both voltages - 230V and 24V of KL06
The wiring centre allows easy and quick connection (230 / 24V). Rated power 80VA
of wired thermostats and actuators by the PLUG-IN
Dimension [mm] 81 x 90 x 68
method.
The KL06 230V wiring centre is adapted to work with NC
(normally closed) type actuators.
Up to 6 thermostats can be connected to the wiring
centre.
80 mm
80 mm
86 mm
86 mm
*Available in 24V version - KL0624V
615111407
300 mm 63 mm 60 mm 20 mm
26 27Flush-mounted thermostat for wired control of heating devices OpenTherm wired, surface-mounted thermostat - programmable
WQ610 RT520
615292903 WQ610 offers two connection variants: Power supply 230V AC 50Hz 615292902
• Activation of the heat source by built-in volt-free relay (ON/OFF)
• Boiler output modulation via OpenTherm communication protocol
Max load 3(1)A The control can be done in two ways: Power supply 2 x AA batteries
(OT+ 4.0) Output signal OpenTherm or COM/NO relay • starting the heat source by closing contacts in a heating device Rating max 3 (1) A
Temperature control range 5 - 35°C equipped with an input for connecting the ON / OFF thermostat
• boiler power modulation by means of communication via the Output signal OpenTherm or
What are the advantages of using OpenTherm? Accuracy of indication 0.1°C or 0.5° voltage free relay NC / COM / NO
OpenTherm protocol (OT + 4.0). Two-way communication between
• two-way communication between the boiler and thermostat
ITLC or Hysteresis control ±0.25°C or ±0.5°C the boiler and thermostat as well as boiler power modulation Temperature range 5 - 33.5°C
algorithm ensures maximum efficiency and comfort. Display temperature accuracy 0.1°C or 0.5°C
• boiler output modulation for maximum efficiency
Communication Wired
• domestic hot water (DHW) temperature regulation Control algorithm TPI or Hysteresis: ±0.25°C or ±0.5°C
• displaying errors and alarm states of the boiler on thermostat screen Dimensions [mm] 86 x 86 x 27 Product advantages:
Communication Wired
• automatically detects OT + 4.0 protocol and regulates hot water
Product features: temperature Dimension [mm] 118 x 95 x 26
• possibility to choose Hysteresis or built-in TPI algorithm for all types
• automatically detects the OT+ 4.0 protocol and regulates the HUW of heating
temperature • works with time schedules
• hysteresis or built-in ITLC algorithm control algorithms • service mode protected by a PIN code
• 3 operation modes (AUTO, MANUAL, OFF) • maximum / minimum temperature limitation
WQ610 is maintaining comfortable conditions in the The surface-mounted thermostat is used for wired
95 mm
95 mm
• PIN-protected service mode • can temporarily change the temperature (overwriting until the next
86 mm
86 mm
room according to pre-programmed schedule or a fixed control of heating devices. It works by maintaining program change)
temperature setpoint set by user. This thermostat needs • maximum/minimum setpoint temperature limits comfortable room conditions in accordance with the
wired/direct connection to the boiler or other heating • temporary override function (manually overrided setpoint work schedule or a constant temperature set by the user.
device. temperature until next change forced by schedule) The thermostat is connected directly to the boiler.
118 mm 26 mm
86 mm 28 mm
ACTUATORS
Surface-mounted thermostat, used to control heating devices wirelessly. OpenTherm wireless, surface mounted thermostat - programmable
WQ610RF WQ610RF offers two connection variants: Transmitter power supply Built-in 3.7V Li-Ion battery
RT520RF
615292604 Activation of the heat source by built-in volt-free relay (ON/OFF) 615292601
OPEN THERM
Power supply for the receiver 230V AC 50Hz
Boiler output modulation via OpenTherm communication protocol The control can be done in two ways:
Max load on the receiver 6(5)A Thermostat's power supply 2 x AA batteries
(OT+ 4.0) • starting the heat source by closing contacts in a heating device
Output signal OpenTherm output signal or COM/ Receiver's power supply 230V AC 50 Hz
equipped with an input for connecting the ON / OFF thermostat
What are the advantages of using OpenTherm? NO relay
• boiler power modulation by means of communication via the Receiver's rating max 16 (5) A
• two-way communication between the boiler and thermostat Temperature control range 5 - 35°C OpenTherm protocol (OT + 4.0). Two-way communication between Output signal OpenTherm or
• boiler output modulation for maximum efficiency Accuracy of indication 0.1°C or 0.5°C the boiler and thermostat as well as boiler power modulation voltage free COM / NO relay
• domestic hot water (DHW) temperature regulation ensures maximum efficiency and comfort. The thermostat Temperature range 5 - 33.0°C
TPI control algorithm or ±0.25°C or ±0.5°C
• displaying errors and alarm states of the boiler on thermostat screen Hysteresis automatically detects the OT + 4.0 protocol, displays boiler error Display temperature accuracy 0.1°C or 0.5°C
Wireless communication 2.6 GHz codes and allows you to adjust the hot water temperature.
Product features: Control algorithm TPI or Hysteresis: ±0.25°C or ±0.5°C
Dimensions [mm] Transmitter 86 x 86 x 11
Product advantages: Communication Wireless, 868 Mhz
• the set is factory paired and prepared for operation Dimensions [mm] Receiver 98 x 98 x 23 • set is factory-paired and ready to work Dimension [mm] Thermostat: 118 x 95 x 26
• maximum boiler setpoint temperature can be limited by OT+ 4.0 • option to choose Hysteresis or built-in TPI algorithm for all types of Receiver: 96 x 96 x 27
protocol heating
• hysteresis or built-in ITLC algorithm control algorithms • works with time schedules
• 3 operation modes (AUTO, MANUAL, OFF) • service mode protected by a PIN code
• PIN-protected service mode • maximum / minimum temperature limitation
WQ610RF in maintaining comfortable conditions in the • maximum/minimum setpoint temperature limits • can temporarily change the temperature (overwriting until the next
room according to pre-programmed schedule or a fixed • temporary override function (manually overrided setpoint The surface-mounted thermostat is used for wireless
control of heating devices. It works by maintaining program change)
temperature setpoint set by user. Thermostat is factory temperature until next change forced by schedule) • has unique transmission codes
paired with the receiver. The receiver is connected to the comfortable room conditions in accordance with the
work schedule or a constant temperature set by the user. • operates at 868 MHz - a stable and noise-resistant signal
boiler or other heat source.
The thermostat is factory-paired with the receiver. The
receiver is connected to the boiler.
96 мм
96 мм
86 мм
86 мм
96 mm
96 mm
95 mm
95 mm
86 мм 11 мм 96 мм 27 мм
118 mm 26 mm 96 mm 27 mm
A list of compatible boilers can be found on the website
www.salus-controls.eu
28 29You can also read
