UNINTERRUPTIBLE POWER SUPPLY (UPS) - Protecting Your Data - CATALOGUE
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Your Inspirations. Our Innovations.
UNINTERRUPTIBLE
POWER SUPPLY (UPS)
Protecting Your Data
CATALOGUE
2014 Revision 2.0
Table of Contents
Table of
Contents About Us - Company Profile 02
Online UPS 04
Professional Series (1P/1P) - Tower 04
Professional Series (1P/1P) - Dual 06
Master Series (1P/1P) - Tower 08
Master Series (1P/1P) - Combo 12
Master Series (1P/1P) - 2-in-1 Rack/ Tower 14
Master Series (3P/1P) - Tower 18
Master Series (3P/1P) - Rack Mount 21
Master Series (3P/3P) - Tower 23
Power Series 25
PPM Series 30
Line Interactive UPS 33
PRO SFC Series 33
PRO SFT Series 35
PRO Series 37
PRO-L Series 39
PRO Rack/ Tower Series 41
Outdoor Line Interactive Series 43
Inverter UPS 45
LCD Inverter Series 45
Auto Voltage Regulator 47
PVR Series 47
DC UPS 48
PDC Series 48
PBU Series 49
Solar UPS 50
Zonne Series 51
PPS Series 52
PCC Series 53
PSI Hybrid Series 54
PSI On-Grid Amnets Series 55
PSI Off-Grid Haus Series 56
PSI Off-Grid Haus MPPT Series 57
Software & Accessories 59
Appendix 64
01
About Us - Company Profile
Fida International (S) Pte Ltd has been a provider of technologically innovative and user-friendly products
manufactured under the brand name “PROLiNK®” since 1991. With more than two decades of professional
experience in the information communications sector, PROLiNK is now renowned as a specialist in its field,
especially in the area of Back-up UPS products.
Over the years, PROLiNK has built its presence through a strong foundation of technological leadership within the
South Asian, South-east Asian and Middle Eastern regions and is continuing to build its presence worldwide. With
its current network of sales offices in more than 20 countries, customers can be assured that PROLiNK is able to
provide the right solutions to meet the needs of both home and business users within each geographical location
both efficiently and effectively.
The company’s quest for continuous improvement and quality assurance to its customers has earned us the
ISO9001 quality certification since 1999. With its consistently strong commitment to quality, customers can be
assured of they are getting true value - superior quality products at affordable prices.
Our Mission
Accentuate The Best For The E-generation
PROLiNK® aspires to accentuate the best for the e-generation. With technology becoming an essential aspect of
modern living, the e-generation concept has gradually become ingrained in our lives and digital literacy is
becoming more and more commonplace.
PROLiNK products are designed to make technology work for the e-generation. Created with the end-user in mind,
our products are crafted to enhance performance whether you are at work or play – our products work harder,
while you work smarter to achieve your desired results with less effort and better efficiency.
Providing value to our consumers – whether home or business users, remains a firm commitment of PROLiNK.
With its wide range of quality products, PROLiNK makes it easy for home users to find user-friendly yet affordable
solutions for their technological needs, while business users are assured of reliable and secure solutions for their
network infrastructure.
Our Vision
Ideas, Innovation and Information
PROLiNK® aims to be the key driving force behind technological changes and improvements in both developing
and developed countries. With its strong focus on technology, our team sets high standards for itself in the areas
of innovation, change and improvement so as to provide the next generation of users with products that are suita-
ble for their technology advanced environments.
The small “i” in PROLiNK represents ideas, innovation and information – three key pillars of growth that drive us
towards achieving excellence in our field of expertise and challenges us to think beyond our usual boundaries.
02
About Us - Company Profile
Core Values
Secured Information Management
With more than two decades of professional experience in providing backup power solutions to our customers, we
are able to support our customers with superior technological know-how and expertise, as well as advice on
market trends. At the same time, we are also fully committed to protecting the privacy of our customers and to
manage confidential information discreetly.
Innovative Design
Our products are carefully thought out to ensure that each item is designed to meet the needs of our customers.
With the team’s solid experience in the UPS market, customers can be certain that our designs are innovative yet
functional, and suitable for each dynamic market that we have a presence in.
Superior Service Standards
Strict and rigorous testing makes up a huge part of our quality control procedures. We ensure that every item
meets our strict standards – from the individual components to the actual finished product.
Total Quality Assurance System
Our products go through careful planning and checks at every stage of the production cycle - from the beginning
stages of product design to the manufacturing and finally the actual delivery of the goods. This guarantees that
our customers receive only the best quality goods – of high reliability and durability. Our total quality system has
been audited and approved by globally recognized bodies.
Range of UPS
The wide range of our products gives you an infinite range of solutions:
1. Online UPS
2. Line Interactive UPS
3. Inverter UPS
4. DC UPS
4. Solar UPS
03
Online UPS
Professional Series (1P/1P) - Tower
Online Professional Series
1kVA – 6kVA
Small Computer Local Area Work-Stations Servers
Network Network (LAN)
Professional Series (1P/1P) is an advanced yet affordable
single-phase UPS system that uses on-line double conversion
technology. It is designed to protect against power outages,
disturbances and spikes, making them most suitable for voltage
fluctuating environments. This device is able to provide
high-efficiency charging with its high input power factor correction.
Professional Series is available in capacities ranging from 1000VA to
6000VA. High voltage battery chargers and battery extension
assembly are made available for longer runtime applications. Users
can also have the option to top-up an additional isolation
transformer to obtain pure and clean power for their sensitive
devices.
• True Double-Conversion Online UPS
• Wide input voltage range (110~300VAC)
• Input Power Factor correction of 0.98
• Output Power Factor of 0.80
• Generator compatible
• LCD User Interface
• Choice between RS-232 communication port or USB / RS-232 / AS400 / SNMP interface
• Smart battery charger designed to optimize battery performance
• Isolation transformer (optional)
Rear Panel
For 1kVA to 6kVA model
1. Output receptacles 5 5
2. AC input 4 4
3. Input circuit breaker 6 6
5
6 8 8
4. Network/Fax Modem Surge Protection
9 9
5. Intelligent slot for communication port/ 1 1
SNMP. (standard come with USB port) 9
6. External battery connection (only available for L model) 4
1 3
7. Output terminal 3 7 2 7
8. Output circuit breaker 2 2
9. Fan
PRO901S/L PRO903S/L PRO906S/L
PRO902S/L
04
Online UPS
Options
• RS-232 Port (communication interface).
• AS-400 Card (External alarm indicator).
• SNMP Card for data communication via network connection.
• Output Isolation Transformer.
• External PDU & Maintenance Bypass Switch. (suitable for UPS up to 3kVA only)
Full Specifications
MODELS PRO901S/ L PRO902S/ L PRO903S/ L PRO906S/ L
Capacity 1000 VA 2000 VA 3000 VA 6000 VA
INPUT
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110-300 VAC ± 5 % at 50% / 160-300 VAC ± 5 % at 100%
Nominal Frequency 50 or 60Hz
Frequency Range 40 ~ 70Hz
Power Factor ≧ 0.98
OUTPUT
Output Voltage 200/ 208/ 220/ 230/ 240VAC
Static Regulation ±1% ±3%
Frequency 50Hz or 60Hz auto selection
Frequency Range 47 ~ 53 Hz or 57 ~ 63 Hz
Power Factor 0.8
Current Crest Ratio 3:1
Liner Load ≦ 3 % THD
Voltage Distortion
Non-Liner Load ≦ 7 % THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 88%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 9AH 10AH
Standard Model
Recharge Time (Typical) 9 hours recover to 90% capacity
Charging Current 1.0 A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 1A / 2A / 4A / 8A (Default) 1A / 2A / 4A / 6A (Default)
OVERLOAD
100% < Load < 110% Overload warning only (No shutdown)
110% < Load 130% 1.5 seconds
INDICATORS
LCD Display Input / Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
Dimension (mm) D x W × H 397 x 145 x 220 421 × 190 × 318 426 × 190 × 318
Standard Model
Net Weight (kgs) 10.8 17.2 28.7 36.2
Dimension (mm) D × W × H 397×145×220 421×190×318 426×190×318
Long-Run Model
Net Weight (kgs) 5.7 8.9 13.1 15.2
ENVIRONMENT
Operation Humidity
Online UPS
Professional Series (1P/1P) - Dual
Online Professional Series
1kVA – 3kVA
Small Computer Local Area Work-Stations Servers
Network Network (LAN)
Professional Series (1P/1P) - Dual is an advanced yet affordable
single-phase UPS system that uses on-line double conversion
technology with 2 different input voltage ranges. It is designed to
protect against power outages, disturbances and spikes, making
them most suitable for voltage fluctuating environments.
Professional Series (1P/1P) – Dual is most suitable to be used in
areas that are plagued by voltages that are as low as 100V. With the
advanced double-conversion technology, the dual series is able to
regulate and maintain consistent output even when it is fully loaded.
Also, this device is able to provide full isolation and complete
common mode noise rejection from complementary equipment. The
Dual Series is available in various capacities, ranging from 1000VA
to 3000VA.
• Online True double-conversion
• Accepts Ultra Low Voltage inputs for special power environment
• Wide input voltage range (88-144VAC and 176-288VAC) at full load
• Input Power factor correction of 0.99
• Output Power Factor of 0.80
• LCD User Interface
• Complete galvanic isolation design offers full isolation and complete
common mode noise rejection
• Choice between RS-232 communication port or USB / RS-232 /
AS400 / SNMP interface
Rear Panel
5 5
For 1kVA to 3kVA model
4 4
1. Output receptacles 5
6 9 6 9 6
2. AC input 8
3. Input circuit breaker
9 1 1
4. Network/Fax/Modem surge protection 9 9
5. Intelligent slot for communication port/SNMP 4 1
3 2 2 7
(standard come with USB port)
2
6. External battery terminal
(only available for Long-run model)
9 9 9
7. Output terminal
8. Output circuit breaker
9. Fan PRO901D S/L PRO902D S/L PRO903D S/L
06
Online UPS
Options
• RS-232 Port (communication interface)
• AS-400 Card (External alarm indicator)
• SNMP Card for data communication via network connection.
• External PDU & Maintenance Bypass Switch. (suitable for UPS up to 3kVA only)
Full Specifications
MODELS PRO901D S/L PRO902D S/L PRO903D S/L
Capacity 1000 VA 2000 VA 3000 VA
INPUT
Nominal Voltage 208/ 220/ 230/ 240VAC
Voltage Range 88VAC ~ 144VAC and 176VAC ~ 288VAC (auto sensing)
Nominal Frequency 50 or 60Hz
Frequency Range 45 ~ 65Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 47 ~ 53 Hz or 57 ~ 63 Hz
Power Factor 0.8
Current Crest Ratio 3:1
Linear Load ≦ 2% THD
Voltage Distortion
Non-Linear Load ≦ 6% THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 80%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 9AH
Standard Model
Recharge Time (Typical) 5 hours recover to 90% capacity
Charging Current 1.0 A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 4.0 A or 8.0 A (max.)
OVERLOAD
100% < Load < 110% Overload warning only (No shutdown)
110% < Load < 130% 30 seconds
>130% 1.5 seconds
INDICATORS
LCD Display Input/ Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
Dimension (mm) D x W × H 423 x 145 x 320 426 x 190 x 448
Standard Model
Net Weight (kgs) 26.5 34 56
Dimension (mm) D × W × H 423 x 145 x 332 421 x 190 x 448
Long-Run Model
Net Weight (kgs) 21.5 23 41
ENVIRONMENT
Operation HumidityOnline UPS
Master Series (1P/1P) - Tower
Online Master Series
1kVA – 10kVA
Small Computer Local Area Work-Stations Servers
Network Network (LAN)
Master Series (1P/1P) is a single-phase UPS system that employs a true
online double-conversion technology. It is designed to deliver clean and
high quality electrical power for devices such as small computer centres,
servers, telecom applications, lab testing equipments and industrial
applications. The Master series (1P/1P) comes with a wide input voltage
range that protects devices against outages, disturbances and spikes. In
addition, this device comes with a smart battery charger that optimizes
the battery performance, ensuring longer lasting battery life. High voltage
battery chargers and battery extension assembly are made available for
longer runtime applications. The Master series (1P/1P) also comes in
various capacities ranging from 1kVA to 10kVA to suit your needs.
The 6kVA and 10kVA UPS system comes with 2 additional features; an
internal bypass system and a parallel redundant system. An internal
bypass system allowing continuous power is integrated for convenience
when maintenance is necessary and a parallel redundant system that
allows two UPS models to operate in parallel as backup for each other.
• True Double-Conversion Online UPS
• Wide input voltage range (110~300VAC)
• Input Power Factor correction of 0.99
• Output Power Factor 0.80
• Generator compatible
• LCD User Interface
• Choice between RS-232 communication port or USB / RS-232 / AS400 / SNMP interface
• Smart battery charger designed to optimize battery performance
Rear Panel
For 1kVA to 3kVA model
1. Programmable outlets: connect to non-critical loads
7 8 9 7 8 9
2. Output receptacles: connect to mission critical loads
7 8 9 6 6
3. AC input 5 5
6
4. Input circuit breaker 13 10 13 10
5 10
5. Network/ Fax/ Modem surge protection 12
6. Emergency power off function connector (EPO) 13
7. USB communication port 1 13 13
2 1
8. RS-232 communication port 4 2 1 4
2 4
9. SNMP intelligent slot 11
3 3 3
10. External battery connection (only available for L model)
11. Output terminal PRO801S/L PRO802S/L PRO803S/L
12. Output circuit breaker PRO8015S/L
13. Fan
08Online UPS
For 6kVA to 10kVA model
1. RS-232 communication port 1 2 3 4 5 5
6
2. USB communication port
3. Emergency power off function connector (EPO connector) 8 7
4. Share current port (only available for parallel model)
5. Parallel port (only available for parallel model)
6. Intelligent slot 8 14
7. Charger fan
8. Power stage fan
9. Maintenance bypass switch 9
10. Input circuit breaker 10
11. Input/Output terminal
12. Output terminal 1 16 12 13 15 11
13. Output terminal 2
14. External battery terminal (only available for Long-run model)
15. Utility input terminal
16. Output IEC Socket
PRO806S/L
PRO810S/L
Battery Pack
For 1kVA to 3kVA model
Model G6 G12 G18
Battery Type 12V7AH 12V9AH 12V7AH 12V9AH 12V7AH 12V9AH
Battery Number (max) 6 pcs 6 pcs 12 pcs 12 pcs 18 pcs 18 pcs
Dimension (DxWxH) mm 397 × 145 × 220 421 × 190 × 318 535 × 190 × 318
Weight (kg) 18 20 36 40 55 61
For 6kVA to 10kVA model
Model G40 G60
Battery Type 12V7AH 12V9AH 12V7AH / 12V90AH
Battery Number (max) 40 pcs 40 pcs 60 pcs 60 pcs
Dimension (DxWxH) mm 592 × 250 × 576 830 × 250 × 576
Weight (kg) 109 125 166 190
09Online UPS
Options
• AS-400 Card (External alarm indicator)
• SNMP Card for data communication via network connection.
• Output Isolation Transformer.
• External PDU & Maintenance Bypass Switch. (Only suitable for UPS that are up to 3kVA)
Full Specifications
MODELS PRO801S/ L PRO8015S/ L PRO802S/ L PRO803S/ L PRO806S/ L PRO810S/ L
Capacity 1000 VA 1500 VA 2000 VA 3000 VA 6000 VA 10000 VA
INPUT
Nominal Voltage 200/208/220/230/240 VAC
Voltage Range 110 - 300 VAC ± 5 % at 50% load / 160 - 300 VAC ± 5 % at 100% load
Nominal Frequency 50 or 60Hz
Frequency Range 40 ~ 70Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 200/ 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 47 ~ 53Hz or 57 ~ 63Hz
Power Factor 0.8
Current Crest Ratio 3:1
Linear Load ≦ 2% THD ≦ 3% THD
Voltage Distortion
Non-Linear Load ≦ 4% THD ≦ 6% THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 90%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 7AH 9AH 7AH 9AH 7AH 9AH
Standard Model
Recharge Time (Typical) 9 hours recover to 90% capacity
Charging Current 1.0 A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 8.0 A (max) 4.0 A (max)
OVERLOAD
100% < Load < 110% Overload warning only (No shutdown)
110% < Load < 130% 30 seconds
>130% 2 seconds
INDICATORS
LCD Display Input/ Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
Dimension (mm) D x W × H 397 x 145 x 220 421 × 190 × 318 592 x 250 x 576
Standard Model
Net Weight (kgs) 13 14 26 28 81 83
Dimension (mm) D × W × H 397×145×220 421×190×318 592 x 250 x 576
Long-Run Model
Net Weight (kgs) 7 7 13 13 25 27
ENVIRONMENT
Operation HumidityOnline UPS
True double-conversion Online UPS SNMP + USB + RS-232 Multiple
A true double conversion UPS will provide clean, high Communication port for Models ranging from 1
level quality power to fully protect mission-critical to 3kVA.
devices such as sensitive networks, small computer This feature allows either the USB or RS-232
centers, servers, telecom applications, as well as for communication port to simultaneously operate with the
industrial applications. SNMP interface.
Output Power factor of 0.8 Higher Accuracy for Output Voltage
As compared to the online UPS models in the current The advanced control firmware allows the Master Series
market, the Master Series (1P/1P) provides better output (1P/1P) to achieve higher accuracy with the output
power factor of up to 0.8. This unit is able to offer higher voltage tolerance of +/- 1%. The device is applicable for
performance and efficiency for your critical applications. the use with critical test and IT equipments.
Smart Battery Charger Design to Optimise
Wide Input Voltage Range (110 V -300 V) Battery Performance
Master Series (1P/1P) can still provide stable power to Master Series (1P/1P) 1-3kVA models are equipped with
connected devices under unstable power environments. a 2-stage charger design to guarantee precise battery
discharge time. The charging voltage is also
automatically adjusted according to the ambient
Programmable Power Management Outlets temperature, to lengthen the service life of the battery.
The programmable power
management outlets allow users to The 6kVA and 10kVA models come with an additional
easily and independently control the extendable charger that allows for large-capacity battery
load segment. In the event of a charging.
power failure, this feature enables
users to manage and extend the
battery time for mission critical DSP Technology (Applies for the above
devices by shutting down the models)
non-critical devices. A DSP controller improves the performance and
Programmable Outlets (P1) efficiency of the UPS.
- connect to non-critical devices
Maintenance Bypass Available For 6kVA And
50/60 Hz Frequency Converter Mode Above Models
Lock output frequency at 50Hz or 60Hz to suit power Internal bypass assures continuous power to critical
sensitive equipments. devices during UPS maintenance.
ECO Mode Operation For Energy Saving Optional Hot Standby and N+X Parallel
Offers efficiency as high as 97% to cut energy usage & Redundant System (Available for Models
cost. UPS power application via static bypass, timely
ranging from 6kVA and above)
returning to online double conversion when the need
arises. An internal bypass system allowing continuous power is
integrated for convenience when maintenance is
necessary and a parallel redundant system that allows
Emergency Power Off (EPO) Function two UPS models to operate in parallel as backup for each
other.
This feature can protect the personnel and the
equipment in the case of fire outbreak or other types of
emergency.
11Online UPS
Master Series (1P/1P) - Combo
Online Master Series
6kVA – 10kVA
Small Computer Local Area Work-Stations Servers
Network Network (LAN)
Master Series (1P/1P) - Combo is a single-phase UPS system that employs a true
online double-conversion technology. It is designed to deliver clean and high
quality electrical power for devices such as small computer centres, servers,
telecom applications and industrial applications. Designed with a small footprint,
this device ensures that it will fit into any corner of your small office.
Master Series (1P/1P) - Combo series comes with a wide input voltage range that
protects devices against the outages, disturbances and spikes. Fitted with a smart
battery charger design, this device is able to optimize its battery performance,
ensuring longer lasting battery life. High voltage battery chargers and battery
extension assembly are made available for longer runtime applications. The
Combo series are available in the following capacities; 6kVA and 10kVA.
• True double-conversion on line UPS
• DSP technology guarantees high performance
• Wide input voltage range (110-300 VAC)
• Active input power factor correction of 0.99
• Output power factor of 0.8
• 50Hz/60Hz frequency converter mode
• Standard backup UPS and long backup UPS in one integrated unit
• Charging current can be adjusted via LCD or software (1A~6A)
• Emergency power off function (EPO)
• Comes with a USB and PS-232 communication port
• Comes with a mini slot for AS-400 / SNMP communication card
• Comes with a maintenance bypass function
4
Rear Panel 1 2 3
For 6kVA to 10kVA model 5
1. RS-232 communication port 7
6
2. USB communication port
3. Emergency power off function connector (EPO connector) 8
4. Intelligent slot 4
5. Power stage fan 9
1 2 3
6. Maintenance bypass switch
7. Input circuit breaker 5 10
8. Input/Output terminal
7
9. External battery terminal (only available for Long-run model) 6
10. Battery Compartment (only available for Standard model)
8
PRO806CL/ PRO806C/
PRO810CL PRO810C
12Online UPS
Options
• AS-400 Card (External alarm indicator)
• SNMP Card for data communication via network connection.
• Output Isolation Transformer.
Full Specifications
MODELS PRO806C/ CL PRO810C/ CL
Capacity 6000 VA 10000 VA
INPUT
Nominal Voltage 208/ 220/ 230/ 240VAC
Voltage Range 110-300 VAC at 50% load / 176-300 VAC at 100% load
Nominal Frequency 50 or 60Hz
Frequency Range 46 ~ 64Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 46 ~ 54Hz or 56 ~ 64Hz
Power Factor 0.8
Current Crest Ratio 3:1
Linear Load ≦3 % THD
Voltage Distortion
Non-Linear Load ≦ 6% THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 90%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 7AH 9AH
Standard Model
Recharge Time (Typical) 9 hours recover to 90% capacity
Charging Current 2.0A
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 6.0 A (max)
OVERLOAD
100% < Load < 110% 10 minutes
110% < Load < 130% 1 minute
>130% 1 second
INDICATORS
LCD Display Input/ Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
Dimension (mm) D x W × H 360 x 192 x 688 440 x 192 x 688
Standard Model
Net Weight (kgs) 60 75
Dimension (mm) D × W × H 360 x 192 x 318 440 x 192 x 318
Long-Run Model
Net Weight (kgs) 21 23
ENVIRONMENT
Operation HumidityOnline UPS
Master Series (1P/1P) - 2-in-1 Rack/ Tower
Online Master Series 1kVA – 10kVA
Small Computer Local Area Work-Stations Servers 19” Rack
Network Network (LAN) Mount
Master Series (1P/1P) – 2-in-1 Rack/Tower is a single-phase UPS system that employs a true online
double-conversion technology. This device comes with a practical 2U universal-mount case that provides an
option for the user to either install it as a floor-standing tower or in a mounted position using a 19-inch rack mount
bracket. With its high density output power factor of 0.9, this device is able to provide outstanding performance
and efficiency to meet the requirements of a mission critical environment.
This 2-in-1 Rank/Tower UPS is brilliantly designed with a hot-swapping battery feature to facilitate the
replacement of the existing batteries without the hassle of having to shut the devices down. On top of that, models
with a 6kVA and 10kVA capacity comes with a parallel redundant system that allows two UPS models to operate
in parallel and as backup for each other. High voltage battery chargers and battery extension assembly are made
available for longer runtime applications. The PROLiNK 2-in-1 Rank/Tower UPS comes with a wide range of
capacities from as low as 1kVA to as high as 10kVA to accommodate to your every need.
• True Double-Conversion Online UPS
• Rack or Tower design
• Wide input voltage range (110~300VAC)
• Input Power Factor correction of 0.99
• Output Power factor of 0.90
• 50/60Hz frequency converter mode
• Hot-Swappable battery design
• Emergency Power Off (EPO) function
• ECO Operation Mode provides energy conservation
• Generator Compatible
• Option available for long-run models to expand the charger capacity to 8A
• Multiple communication interface (SNMP/USB/RS-232)
• Smart battery charger is designed to optimize overall battery performance
• Selectable output voltage via LCD panel
14Online UPS
Rear Panel
For 1kVA to 3kVA model
1. Programmable outlets: Connect to non-critical loads
1
2. Output receptacles: Connect to mission-critical loads 7
3
3. AC input 5 12 6 10 9
8
4. Input circuit breaker 2 4
5. Network/Fax/Modem surge protection PRO801RS/RL PRO8015RS/RL PRO802RS/RL
6. Emergency power off function connector (EPO)
7 1 3
7. USB communication port
5 12 12 10 9 6 11
8. RS-232 communication port
8
9. SNMP intelligent slot 2 4
10. External battery terminal (only available for Long-run model) PRO803RS/RL
11. Output IEC320-C20 connector
12. Fan
For 6kVA to 10kVA model
1. Programmable outlets: Connect to non-critical loads
2. Output receptacles: Connect to mission-critical loads
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection 13
6. Emergency power off function connector (EPO)
9 6
7. USB communication port 4
7 12
8. RS-232 communication port 11 16 15
14 10
9. SNMP intelligent slot 7
10. Battery connection PRO806RS/RL
11. Input terminal PRO810RS/RL
12. Fan
13. Parallel port (only available for parallel model)
14. External maintenance by-pass switch connection
15. Output Terminal
16. Ground
Battery Pack
For 1kVA to 10kVA model
Model G8R G12R G20R
Battery Type 12V9AH 12V7AH 12V9AH
Battery Number (max) 8 pcs 12 pcs 20 pcs
Dimension (DxWxH) mm 480 × 438 × 88 600 × 438 × 88 580 × 438 × 133
Weight (kg) 29.8 42.5 57 63
15Online UPS
Options
• AS-400 Card (External alarm indicator)
• SNMP Card for data communication via network connection
• MODBUS Card (communication interface)
• Universal Rackmount Slider for installation in rack cabinets
• External PDU & Maintenance Bypass Switch (Only suitable for UPS that are up to 3kVA)
• Maintenance Bypass Switch [MBS] (Only available in UPS ranging from 6 to 10kVA)
• External Automatic Transfer Switch (ATS)
Full Specifications
MODELS PRO801RS/ RL PRO8015RS/ RL PRO802RS/ RL PRO803RS/ RL PRO806RS/ RL PRO810RS/ RL
Capacity 1000 VA 1500 VA 2000 VA 3000 VA 6000 VA 10000 VA
INPUT
Nominal Voltage 200/ 208/ 220/ 230/ 240 VAC
Voltage Range 110-300 VAC at 50% load / 160-300 VAC at 100% load
Nominal Frequency 50 or 60Hz
Frequency Range 40 ~ 70Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 200/ 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 47 ~ 53Hz or 57 ~ 63Hz
Power Factor 0.9
Current Crest Ratio 5:1 5:1 3:1
Linear Load ≦ 2% THD
Voltage Distortion
Non-Linear Load ≦ 4 % THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 90%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 9AH 7AH 9AH
Standard Model
Recharge Time (Typical) 4 hours recover to 90% capacity 9 hours recover to 90% capacity
Charging Current 1.0 A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 1A / 2A / 4A / 8A 4.0 A (max)
OVERLOAD
100% < Load < 110% Overload warning only (No shutdown) 10 minutes
110% < Load < 130% 30 seconds 1 minute
>130% 2 seconds 1 second
INDICATORS
LCD Display Input/ Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
UPS Unit: UPS Unit:
580x438x133 (3U) 688x438x133 (3U)
Dimension (mm) D x W × H 380x438x88 (2U) 480x438x88 (2U) 600x438x88 (2U)
Standard Model Battery Unit: Battery Unit:
580x438x133 (3U) 580x438x133 (3U)
UPS unit: 20 UPS unit: 23.5
Net Weight (kgs) 12.9 17.6 20.6 28
Battery pack: 57 Battery pack: 63
Dimension (mm) D × W × H 380x438x88 (2U) 480x438x88 (2U) 600x43x88(2U) 580x438x133 (3U) 668x438x133 (3U)
Long-Run Model
Net Weight (kgs) 8.6 10.7 11.3 13.8 20 23.5
ENVIRONMENT
Operation Humidity < 95 % non-condensing
Ambient Temperature 0°C - +40°C
Noise Level < 60dBA @ 1 Mete
Regulations Safety: EN62040-1-1; EMI: EN62040-2; EN62040-3
MANAGEMENT
USB/ RS-232 Supports Windows® 2000/2003/XP/Vista/2008/7, Linux, Unix, and MAC
L stands for Long-run model
S stands for Standard model
*All specifications, designs and contents are subject to change without prior notice.
16Online UPS
True Double-conversion Online UPS Output power factor 0.9
A true double conversion UPS system will provide clean Master (1P/1P) 2-in-1 rack/Tower Series is a
and high quality electrical power to fully protect mission high-density UPS system with an output power factor of
critical systems such as sensitive networks, small 0.9. With this high power factor, the Master series is able
computer centers, servers, telecom applications and to provide higher performance to critical applications.
industrial applications.
Programmable Power Management Outlets
User-friendly LCD Display The programmable power management outlets allow
The front panel digital display comes with an auto- users to easily and independently control the load
rotation feature that caters to your installation segment. In the event of a power failure, this feature
preference; either vertically or wall mounted. enables users to manage and extend the battery time for
mission critical devices by shutting down the non-critical
devices.
Programmable Outlets (P1)
- connect to non-critical
devices
Rack Display Tower Display
ECO and Advanced ECO Mode for Energy Saving
Rack / Tower Design It allows the UPS to operate in high efficiency of up to
This device comes with a practical 2U universal-mount 97% during energy saving ECO mode and 98% in
case that provides an option for the user to either install operation mode. In the event of an electrical AC failure,
it as a floor-standing tower or in a mounting position the inverter will automatically step-in and provide
using a 19-inch rack mount bracket. electrical supply to the connected systems.
Emergency Power Off Function (EPO)
This feature provides adequate protection for the user
and the equipment against hazards such as fire
break-out or other emergencies.
19” Rack-mounting Floor-standing Tower
Hot-swapping Battery Design
The hot-swapping battery feature helps to facilitate the
replacement of the existing batteries without the hassle
High Output Crest Ratio of having to shut the devices down.
The Master (1P/1P) 2-in-1 Rack/Tower Series is
designed with a high output crest ratio of 5:1 that allows
the device to be extremely compatible with equipment
such as compressors, generators and motors.
Output Voltage Regulation (tolerance +/- 1%)
The Master (1P/1P) 2-in-1 rack / Tower Series is able to Long Battery Runtime Models Available
produce extremely stable and clean electrical power with
Our Long Battery Runtime Models offers the flexibility to
its high efficiency output voltage regulator. This regulator
add-on additional external batteries to provide a longer
is able to achieve a tolerance of +/- 1%, making it
back-up time.
extremely compatible even with sensitive power
supplies.
17Online UPS
Master Series (3P/1P) - Tower
Online Master Series
10kVA – 30kVA
Local Area Telecommunication Data Electro-Medical Storage Emergency E-Business
Network Devices Centre Device PLCS Alarm (Server Farms,
(LAN) Devices ISP/ASP/POP)
Master Series (3P/1P) three-phase input / single-phase output, true online double
conversion UPS system guarantees consistent and quality electrical power to protect
your mission critical applications such as mid-sized business servers,
telecommunication systems and industrial equipment. The (3P/1P) UPS is designed with
a wide input voltage range to handle voltage fluctuating situations and a high accuracy
output voltage to fail-safe your equipment.
This Voltage Frequency Independent (VFI) system is available in capacities from 10kVA to
30kVA. By adopting the latest IGBT technology, this device is able offer excellent voltage
switching characteristics during generator operation. An internal bypass system allowing
continuous power is also integrated for convenience when maintenance is necessary. In
addition, this device comes with a parallel redundant system that allows two UPS models
to operate in parallel and as backup for each other. The Master series (3P/1P) UPS also
offers the option of adding on an isolation transformer to suit your requirements.
• True Double-Conversion Online UPS • Wide input voltage range
• DSP technology guarantees high performance • Output Power Factor 0.80
• Input Power Factor Correction 0.99 • Comes with a maintenance bypass function
• Active power factor correction in all phases • Optional N+X parallel redundancy
• 50/60Hz frequency converter mode • Emergency Power Off (EPO) function
• Multiple communication interface (SNMP/USB/RS-232) • Isolation transformer (Optional)
Rear Panel
For 10kVA model
1. RS-232 communication port 1 2 3 4 5 5
6
2. USB communication port
3. Emergency power off function connector (EPO connector) 8 7
4. Share current port (only available for parallel model)
5. Parallel port (only available for parallel model) 14
8
6. Intelligent slot
7. Charger fan
8. Power stage fan 9 10
9. Maintenance by-pass switch
11
10. Input circuit breaker
12 13
11. Output circuit breaker for receptacles
12. Output receptacles: connect to mission-critical loads
13. Input/Output terminal
14. External battery connector (Only available for Long-run Model) PRO83110S/L
18Online UPS
For 15kVA to 30kVA model
1. RS-232 communication port
1 2 3 4 5 5
2. USB communication port 6
3. Emergency power off function connector (EPO connector)
8
4. Share current port (only available for parallel model) 7
5. Parallel port (only available for parallel model)
6. Intelligent slot 8
7
7. Charger fan 1 2 3 4 5 5
6
8. Power stage fan
8 9 10
9. Maintenance by-pass switch 7
10. Input circuit breaker
11
11. Output circuit breaker for receptacles
8
7
12. Output receptacles: connect to mission-critical loads
13. Input/Output terminal
14. Output Terminal: Connect to mission-critical loads 9 10
15. Programmable Output terminal: Connect to non-critical loads
16. External battery terminal (only available for Long-run model) 11 18
17. Utility input terminal
18. Grounding terminal (only available for parallel system)
PRO83115L PRO83115S
PRO83120L PRO83120S
PRO83130S/L
PRO83130L
For 10K model For 15K & 30K model
18
14 15 17
14 15 16 17
Options
• AS-400 Card (External alarm indicator)
• SNMP Card for data communication via network connection
• MODBUS Card (Communication interface)
• Output Isolation Transformer
19Online UPS
Full Specifications
MODELS PRO83110S/ L PRO83115S/ L PRO83120S/ L PRO83130 (S/L)
Capacity 10 kVA 15 kVA 20 kVA 30kVA
INPUT
Nominal Voltage 3 x 400 VAC (3Ph+N)
Voltage Range 305-478 VAC (3-phase) at 100% load
Nominal Frequency 50 or 60Hz
Frequency Range 46 ~ 64Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 50 ~ 60Hz ± 0.1 Hz
Power Factor 0.8
Current Crest Ratio 3:1
Liner Load ≦ 2% THD
Voltage Distortion
Non-Liner Load ≦ 5% THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 90%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 9AH
Standard Model
Recharge Time (Typical) 9 hours recover to 90% capacity
Charging Current 1.0 A (max) 2.0 A (max) 4.0 A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 4A 8A 12.0 A (max)
OVERLOAD
100% < Load < 110% 10 minutes
110% < Load < 130% 1 minute
>130% 1 second
INDICATORS
LCD Display Input / Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
Dimension (mm) D x W × H 592 x 250 x 576 815 × 250 × 826 815 × 300 × 1000
Standard Model
Net Weight (kgs) 83 164 234
Dimension (mm) D × W × H 592 ×250 × 576 592 x 250 x 576 815 × 250 × 826
Long-Run Model
Net Weight (kgs) 28 40 64
ENVIRONMENT
Protection IP20
Operation HumidityOnline UPS
Master Series (3P/1P) - Rack Mount
Online Master Series 10kVA – 20kVA
Local Area Telecommunication Data 19” Rack Storage Emergency
Network Devices Centre Mount PLCS Alarm
(LAN) Devices
Master Series (3P/1P) – Rack three-phase input / single-phase output, true online double conversion UPS system
guarantees consistent and quality electrical power to protect your mission critical applications such as mid-sized
business servers, telecommunication systems and industrial equipments. This (3P/1P) UPS is designed with a wide
input voltage range to handle voltage fluctuating situations and a high accuracy output voltage to fail-safe your
equipment.
This Voltage Frequency Independent (VFI) system is available in capacities from 10kVA to 20kVA. By adopting the latest
IGBT technology, this device is able offer excellent voltage switching characteristics during generator operation. An
internal bypass system allowing continuous power is also integrated for convenience when maintenance is necessary.
In addition, this device comes with a parallel redundant system that allows two UPS models to operate in parallel and as
backup for each other. The Master series (3P/1P) – Rack UPS also offers the option of adding on an isolation transformer
to suit your requirements.
• True double-conversion • Eco mode operation for energy saving (ECO)
• DSP technology guarantees high performance • Emergency power off function (EPO)
• Output Power Factor 0.8 • Generator compatible
• Wide input voltage range • Multiple communication interface (SNMP/USB/RS-232)
• Active power factor correction in all phases • Adjustable battery numbers
• 50Hz/60Hz frequency converter mode • Optional N+X parallel redundancy
4 4 4
Rear Panel 5 7
1
8
6 6 2
For 10kVA to 20kVA model 11
3
1. RS-232 communication port 9 12 10
2. USB communication port PRO83110RS/RL
3. Emergency power off function connector (EPO connector)
4. Parallel port (only available for parallel model) 5 7
1
5. Intelligent slot 2
6 6
6. Fan 9 3
7. External maintenance by-pass switch connection
12 4
8. Input circuit breaker
8
9. Input/Output terminal 10 6 6 4
10. Output terminal 4
11
11. Battery terminal
12. Input terminal PRO83120RS/RL
21Online UPS
Options
• AS-400 Card (External Alarm Indicator)
• SNMP Card for data communication via network connection
• MODBUS Card (Communication interface)
• Universal Rackmount Slider for installation in rack cabinets
• External Maintenance Bypass Switch (Only available with 10kVA model)
Full Specifications
MODELS PRO83110RS/ RL PRO83120RS/ RL
Capacity 10kVA 20kVA
INPUT
Nominal Voltage 3 x 400 VAC (3Ph+N)
Voltage Range 305-478 VAC (3-phase) at 100% load
Nominal Frequency 50 or 60Hz
Frequency Range 46 ~ 64Hz
Power Factor ≧ 0.99
OUTPUT
Output Voltage 208/ 220/ 230/ 240VAC
Static Regulation ±1%
Frequency 50Hz or 60Hz auto selection or selectable
Frequency Range 46 ~ 54Hz or 56 ~ 64Hz
Power Factor 0.8
Current Crest Ratio 3:1
Linear Load ≦ 2% THD
Voltage Distortion
Non-Linear Load ≦ 5% THD
Waveform Pure Sinewave
EFFICIENCY
AC Mode Up to 89%
BATTERY
Type Valve regulated Lead Acid battery (Maintenance free batteries)
Capacity 9AH
Standard Model
Recharge Time (Typical) 9 hours recover to 90% capacity
Charging Current 1.0 A (max) 2.0A (max)
Type Depending on the application
Long-Run Model Capacity Depending on the application
Charging Current 4.0 A (max)
OVERLOAD
100% < Load < 110% 10 minutes
110% < Load < 130% 1 minute
>130% 1 second
INDICATORS
LCD Display Input/ Output Voltage, Load Level, Batt Level, UPS Status, Fault Conditions
PHYSICAL
UPS Unit: 668 x 438 x 133 (3U) UPS Unit: 668 x 438 x 266 (6U)
Standard Model Dimension (mm) D x W × H
Battery Pack: 580 x 438 x 133 (3U) BatteryPack: 580 x 438 x 133 (3U) x 2
UPS unit: 22 UPS unit: 45
Net Weight (kgs)
Battery pack: 63 Battery pack: 63 x 2PCS
Dimension (mm) D × W × H 668 x 438 x 133 (3U) 668 x 438 x 266 (6U)
Long-Run Model
Net Weight (kgs) 22 45
ENVIRONMENT
Protection IP20
Operation HumidityOnline UPS
Master Series (3P/3P) - Tower
Online Master Series
10kVA – 30kVA
Local Area Telecommunication Data Electro-Medical Storage Emergency E-Business
Network Devices Centre Device PLCS Alarm (Server Farms,
(LAN) Devices ISP/ASP/POP)
Master Series (3P/3P) – Tower three-phase input / three-phase output, true
online double conversion UPS system guarantees consistent and quality
electrical power to protect your mission critical applications such as small
server room, medical devices, telecommunication facilities and industrial
processes. This (3P/3P) UPS is designed with a wide input voltage range to
handle voltage fluctuating situations and a high accuracy output voltage to
fail-safe your equipment.
The Master Series (3P/3P) UPS system is available in capacities from 10kVA to
30kVA. By adopting the latest IGBT technology, this device is able offer excellent
voltage-switching characteristics during generator operation. An internal
bypass system allowing continuous power is also integrated for convenience
when maintenance is necessary. In addition, this device comes with a parallel
redundant system that allows two UPS models to operate in parallel and as
backup for each other. The Tower series UPS also offers the option of adding on
an isolation transformer to suit your requirements.
• True Double-Conversion Online UPS • Wide input voltage range
• DSP technology guarantees high performance • Output Power Factor of 0.80
• Input Power Factor Correction 0.99 • Comes with a maintenance bypass feature
• Active power factor correction in all phases • Optional N+X parallel redundancy
• 50/60Hz frequency converter mode • Emergency Power Off (EPO) function
• Multiple communication interface (SNMP/USB/RS-232) • Isolation transformer (Optional)
Rear Panel 1 2 3 4 5
6
For 10kVA to 30kVA model 8
7
1. RS-232 communication port
2. USB communication port 8
7
3. Emergency power off function connector (EPO connector)
4. Share current port (only available for parallel model) 9 11 10 13
5. Parallel port (only available for parallel model)
6. Intelligent slot 12
7. Charger fan
8. Power stage fan
9. Maintenance bypass switch
10. Bypass Input Circuit Breaker (Only available for dual input unit)
11. Input circuit breaker
12. Input/Output terminal
PRO83310S/L
13. External battery terminal (only available for Long-run model) PRO83320S/L
PRO83330S/L
23Online UPS Options • AS-400 Card (External Alarm Indicator) • SNMP Card for data communication via network connection • MODBUS Card (Communication interface) • Output Isolation Transformer Full Specifications MODELS PRO83310S/ L PRO83320S/ L PRO83330S/ L Capacity 10kVA 20kVA 30kVA INPUT Nominal Voltage 3 x 400 VAC (3Ph+N) Voltage Range 300VAC
Online UPS
Power Series
Online Power Series
15kVA – 120kVA
Local Area Telecommunication Data Electro-Medical Storage Emergency E-Business
Network Devices Centre Device PLCS Alarm (Server Farms,
(LAN) Devices ISP/ASP/POP)
Power Series (3P/3P) three-phase input / three-phase output, true online double conversion
UPS system guarantees to supply consistent and quality electrical power to protect your
mission critical applications such as data centres, medical equipments and call centres.
Harmful effects of harmonic injection are eliminated with the employment of Adaptive Feed
Forward Cancellation (AFC) technology. With a UPS system that reflects low harmonic
distortion and high input power factor, it is able to lower installation costs by utilizing smaller
cables and miniature circuit breakers (MCB).
Our team of specialists has gathered together to revolutionize the UPS usability by adding in a
5.7” LCD monitor display with all information and alarm notifications viewable within a single
display. To ensure our products are user centered, our group of specialist has also adopted a
front access concept to create a UPS system that is easy for users to carry out preventative
maintenance and replacement activities. In addition, this device comes with a parallel
redundant system that allows four UPS models to operate in parallel. An option of an
additional isolation transformer is also available to suit your requirements. The Power series is
available in models ranging from 15kVA to 120kVA.
• Online double conversion technology with DSP control
• Harmful effects of harmonic injection are eliminated with the employment
of Adaptive Feed Forward Cancellation (AFC) technology
• Very low input current distortion (THDi < 1%)
• Input power factor 0.99 at 10% load
• Output efficiency up to 95%
• Control designed to withstand all kinds of loads
• Variety of communication options available
• Optional N+X parallel redundancy
• Remaining backup time calculation
• Optional isolation transformer
1 1
2 2
Rear Panel (Internal) 1
3 3
2 10 10
For 15kVA to 80kVA model 3
4 4
1. Relay interface 10
2. Emergency Power Off (EPO) 4
3. RS-232 COM ports
4. Intelligent Slow
5 6 7 8 5 6 7 8
5. Input circuit breaker
5 6 7 8
6. Maintenance bypass switch
9 9 9
7. Output switch
8. Battery switch
9. System Terminal PRO73315S/SI PRO73330S/SI PRO73360S/SI
PRO73320S/SI PRO73340S/SI PRO73380S/SI
10. Parallel port (only available for parallel model)
25Online UPS
1
For 100kVA to 120kVA model 3
2
1. Relay interface 10
2. Emergency Power Off (EPO)
4
3. RS-232 COM ports
4. Intelligent Slow
5. Input circuit breaker
6. Maintenance bypass switch
7. Output switch 5 6 7 8
8. Battery switch
9
9. System Terminal
10. Parallel port (only available for parallel model)
PRO733100S
PRO733120S
Full Specifications
MODELS PRO73315S/ SI PRO73320S/ SI PRO73330S/ SI PRO73340S/ SI PRO73360S/ SI PRO73380S/ SI
Capacity 15kV 20kVA 30kVA 40kVA 60kVA 80kVA
INPUT
Nominal Voltage 3 x 400V (3Ph + N)
Voltage Range 300VACOnline UPS MODELS PRO733100S PRO733120S Capacity 100kVA 120kVA INPUT Nominal Voltage 3 x 400V (3Ph + N) Voltage Range 300VAC
Online UPS
The Most Versatile Solution For Power Input Power Factor 0.99 At 10% Load
Protection Lower power losses would result in reduced
The Power Series is designed with the new state of art consumption, lower operation and maintenance costs.
transformerless PWM technology that can be easily
INPUT POWER FACTOR
adapted to any kinds of complicated loads such as the
1,20
non-linear systems (IT systems), highly inductive/
capacitive loads, high-density discharge lamps and 1,00
induction motors. The Power series is designed with 2 0,80
important criterions in mind; maximum efficiency and
PFin
0,60
energy conservation. The unit also comes with a small
0,40
form factor to allow for minimum installation effort.
Furthermore, a parallel redundant system is integrated to 0,20
allow two UPS models to operate in parallel as backup 0,00
for each other. The Power Series is available in 0% 25% 50%
LOAD
capacities ranging from 15 to 120kVA.
Output Efficiency of up to 95%
Online Double Conversion Technology with
DSP Control Designed with a DSP controller and fourth generation
IGBT transistors, the UPS is able to achieve extremely
The Power Series is able provide a higher load up-time high efficiency of up to 95%. With such high ratings,
and effective insulation against network disturbance components in the UPS are not only protected but also
with its online double conversion technology. A Digital prolonged due to the decrease in heat losses.
Signal Processor (DSP) controller improves the
performance and efficiency of the UPS. SERIES TIPICAL EFFICIENCY
100%
75%
EFFICIENCY
50%
Advanced Control with Adaptive Feed Forward
Cancellation (AFC) Technology 25%
By cancelling both the input current and the output
voltage harmonics, the harmful effects of harmonic 0%
0% 25% 50%
injection can be eliminated and this enhances the load LOAD
integrity.
Small Form Factor
Low Input Current Distortion (THDi < 1%) Utilizes a transformerless technology allows the design
AFC cells are used to achieve extremely low distortion of the UPS to be lighter and smaller.
values. The Power series is able to obtain a low input
current distortion at THDi < 1% under full load and a THDi
< 5% under smaller load (i.e. 10% of load). This will
prevent distortion of electrical network upstream and
thus, result in the reduction of cable usage and protective
devices in the electrical network.
28Online UPS
Front Access concept Variety Of Communications And Option
An important consideration has Available
been given during the UPS design The UPS has provided the following standard
phase to create a system that communication selections:
allows users to access the • Relay interface
unit’s electronic cards and power • RS-232/485 port
components with minimum • 1 × SNMP slot
effort. All electronic boards and • Modbus RTU / SEC protocol
components can be accessed • 2 × connectors for parallel connection
from the front panel for easy
maintenance and replacement
activities.
Made of 60% Recyclable
Materials
When it comes to conserving the
environment, PROLiNK is committed to
play a part by designing their UPS
Versatile Single-Phase / Three-Phase set-ups products using recyclable materials.
This highly versatile UPS is designed with different types
of setting-up options;
• Three-phase input / Three-phase output (III/III)
• Three-phase input / Single phase output (III/I)
Back-up Time indicator
With the use of simple algorithms, an estimated
remaining back-up time can be calculated and
indications will be reflected on a LCD panel.
Control Components are designed to with
stand all kinds of loads
In the Power Series, the control components are
designed to withstand all types of loads. These include
loads such as; resistive, capacitive, non-linear, 5.7” Multiple Languages Graphical LCD
high-density discharge lamps, induction motors, speed Display
drives etc. This makes the UPS extremely compatible
Our team of specialists has gathered together to
with many types of electronics. Better yet, the UPS
revolutionize the UPS usability by adding in a 5.7” LCD
comes with a wide array of parameters that can be
monitor display with all information and alarm
programmed locally or remotely to fit different types of
notifications viewable within a single display.
environment.
N+1 Redundancy
A parallel redundant system allows 4 UPS models to
operate in parallel and as backup for each other.
29Online UPS
PPM Series
PROLiNK Power
Modular (PPM)
UPS System
Local Area Telecommunication Data Electro-Medical Storage Emergency E-Business
Network Devices Centre Device PLCS Alarm (Server Farms,
(LAN) Devices ISP/ASP/POP)
PROLiNK PPM Series modular three-phase input / three-phase output
online double conversion UPS takes scalability to a whole new level. Based
on a scalable design, the PPM comes with a wide range of capacity, ranging
from as low as 30kVA to as high as 210kVA. The PPM series is designed with
a N+X parallel redundancy system that allows two or more UPS modules to
operate in parallel and as back-up for each other. This unit provides an ideal
protection for data centers, telecommunication facilities and other critical
applications. Up to seven 30kVA modules can be fitted into a standard
cabinet to simplify maintenance and replacement activities. The PPM Series
guarantees a low mean-time-to-repair (MTTR), giving users a shorter
elapsed time between the point of repair and the point of equipment
recovery.
• N+1 parallel redundancy
• Online double conversion technology
• Output Power Factor of 1
• Modular design decreases MTTR
• High scalability
• Internal maintenance bypass available
• Adjustable charging current
• Highly interactive 5.7" LCD design
High Efficiency Online Double Conversion High Scalability
Technology Based on a scalable design, the PPM Series simplifies
PROLiNK PPM is designed with the latest online double future expansion by making UPS units easily upgradable.
conversion technology that provides a high efficiency This architecture allows you to meet power demands by
rating of 96%. With such a high efficiency rating, the PPM adding additional modules vertically in a single rack
can save you hundreds of dollars each year. enclosure.
Unity Output Power Factor Modular Design Lowers MTTR
With a unity output factor (kVA = kW), the PROLiNK The modular design ensures uninterrupted power supply
PPM UPS system is 100% compatible with today's high during UPS maintaining and replacing activities. Also, the
power factor loads. It is able to meet the latest PPM Series guarantees a low mean-time-to-repair
server requirements, giving the best value for your IT (MTTR), giving users a shorter elapsed time between the
investments. point of repair and the point of equipment recovery.
30Online UPS
N+X Parallel Redundancy Ease Of Installation and Maintenance
The PPM series is designed with a N+X parallel With a built-in maintenance bypass feature, the UPS is
redundancy system that allows two or more UPS able to deliver continuous power to the critical load
modules to operate in parallel and as back-up for each during maintenance. Better yet, the PPS comes with a
other. front access concept to facilitate installation.
Adjustable Charging Current High Overload Capability
PROLiNK PPM comes with a maximum charging current
PROLiNK PPM supports 110% overload for 60 minutes,
of up to 8A for each individual module. The charging
120% for 10 minutes and 150% for 1 minute.
current can be adjusted based on the necessary
requirement.
5.7” LCD Graphic Mimic Panel
A multilingual 5.7" graphic
LCD screen is integrated as
part of the design to provide
users with visual information
and advanced control
abilities.
PPM90
The PROLiNK PPM90 is a compact stand alone UPS system that provides the
best backup solution for small and medium loads. This unit comes with a
standard EIA height of 30U and is able to fit capacities ranging from 30kVA to
90kVA in the same cabinet. With features such as N+1 redundancy and the
capability for future expansion, the PROLiNK PPM90 is definitely able to make
your backup experience an absolute cinch.
No. Of Module Capacity Dimension
1 30kVA
2 60kVA 600 x 1100 x 1485 (30U) mm
3 90kVA Exterior Interior
PPM210
The PROLiNK PPM210 is a standalone UPS system that comes with a standard
EIA height of 42U. This unit is able to fit 7 x 30kVA modular redundancy in the
same cabinet. Even better, the PPM210 has the capability to manage future
capacity expansion of up to 210kVA, making the PPM210 the best backup
solution for greater loads.
No. Of Module Capacity Dimension
1 30kVA
2 60kVA
3 90kVA
4 120kVA 600 x 1100 x 2030 (42U) mm
5 150kVA
6 180kVA
7 210kVA Exterior Interior
31You can also read
