Natural Comfort for Everybody - Jadair
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Natural Comfort for Everybody AIR CONDITIONING SYSTEMS
Comfort takes Contents
on new Product Line Up
meaning with
4
Inverter Technologies 7
the power of Cleaning-Free Pipe
technology
Reuse Technology 9
Advanced Technology
Our technologically advanced Mr. Slim for High Efficiency 10
Power Inverter systems improve comfort,
operate with significantly less noise, Wi-Fi Controller 11
... and provide increased energy savings.
MA Wall Controller 12
Zone Controller 14
System Controls 16
Function List 25
Specifications 27
02 03
Product Line-up
1- & 3-phase 1- & 3-phase 1- & 3-phase 1- & 3-phase See
1-phase 2.5kW 1-phase 3.5kW 1-phase 5.0kW 1-phase 6.0kW 1-phase 7.1kW 3-phase 20.0kW 3-phase 25.0kW Remote Controller
10.0kW 12.5kW 14.0kW 17.0kW Page
PLA
Series
20
Wide
Power
optional optional optional
4-Way Cassette PLA-M71EA-A PLA-M100EA-A PLA-M125EA-A PLA-M140EA-A
Ceiling
Cassette
SLZ
18
Series
optional optional optional
SLZ-KF25VA3 SLZ-KF35VA3 SLZ-KF50VA3 SLZ-KF60VA3
Compact SEZ
19
Bulkhead Series
SEZ-KD25VAQ(L) SEZ-KD35VAQ(L) SEZ-KD50VAQ(L) SEZ-KD60VAQ(L) SEZ-KD71VAQ(L)* standard for optional
SEZ-VAL
PEAD
21
Series
PEAD-M71JAAD PEAD-M100JAAD PEAD-M125JAAD PEAD-M140JAAD standard optional optional optional
Ceiling-
Concealed
PEA
22
Series
optional optional optional
PEA-M100GAA PEA-M125GAA PEA-M140GAA PEA-RP170WJA PEA-RP200WJA PEA-RP250WHA
Ceiling- PCA-KA
23
Suspended Series
optional optional optional
PCA-M50KA PCA-M60KA PCA-M71KA PCA-M100KA PCA-M125KA PCA-M140KA
Wall- PKA
24
mounted Series
standard optional optional
PKA-M71KAL PKA-M100KAL
R410A
P Series
S Series
SUZ-KA25VAD2 SUZ-KA35VAD2 SUZ-KA50VAD2 SUZ-KA60VAD2 SUZ-KA71VAD2 PUZ-RP170V(Y)KA PUZ-RP200YKA PUHZ-RP250YKM
Outdoor
Unit
R32
P Series
PUZ-ZM71VHA-A PUZ-ZM100V(Y)KA PUZ-ZM125V(Y)KA PUZ-ZM140V(Y)KA
*SEZ/SLZ indoor units should be connected to an SUZ outdoor unit.
*PKA-M71KAL only available with PUZ-ZM7VHA.
04 05
Limited power
Limited energy savings Insufficient power
Inverter Technologies
Electricity is wasted when needed
Mitsubishi Electric inverters ensure a high level of performance, including the optimum control
of operation frequency. As a result, optimum power is applied in all heating/cooling ranges,
Heat Compressor
and maximum comfort is achieved while consuming minimal energy. Fast, comfortable
exchanger
operation and low running cost - that’s the Mitsubishi Electric promise.
Power Heat
receiver exchanger
How Do Inverters Work?
Inverters electronically control theLEV1 LEV2
electrical voltage, current and frequency of electrical devices such as the compressor motor
in an air conditioner.
They receive information from sensors monitoring operating conditions and adjust the revolution speed of the compressor,
which directly regulates air conditioner output. Optimum control of operation frequency results in eliminating the consumption
of excessive electricity and providing the most comfortable room environment.
Grooved
Economic Operation piping
Impressively low operating cost is a key advantage of inverter air conditioners. We’ve combined advanced inverter
technologies with cutting-edge electronics and mechanical technologies to achieve a synergistic effect that enables
improvements in heating/cooling performance efficiency. Better performance and lower energy consumption are the results.
True Comfort
Below is a simple comparison of air conditioner operation control with and without an inverter.
Pipe image
Cross-sectional
Inverter view
Operation Comparison
On/Off operation of compressor Optimum control of frequency
Non-inverter air conditioner Inverter air conditioner
keeps room temperature keeps preset room temperature
Change in room
temperature Full power Change in room
temperature
Minimum power
temperature
consumption
temperature
Preset
Preset
ON OFF ON OFF ON
getting too hot getting too cool Constant room temperature
Compressor operation Time Compressor operation Time
The compressors of air conditioners without an inverter start and stop repeatedly to maintain the preset room temperature. This repetitive on/
off operation uses excessive electricity and compromises room comfort. The compressors of air conditioners equipped with an inverter run
continuously; the inverter quickly optimises the operating frequency according to changes in room temperature. This ensures energy-efficient
operation and a more comfortable room.
KEY TECHNOLOGIES
Rotary Compressor Scroll Compressor
Our rotary compressors use our original “Poki-Poki Motor” Our scroll compressors are equipped with an advanced
and “Heat Caulking Fixing Method” to realise downsizing frame compliance mechanism that allows self-adjustment of
and higher efficiency, and are designed to match various the position of the orbiting scroll according to pressure load
usage scenes in residential to commercial applications. and the accuracy of the fixed scroll position. This minimises
Additionally, the development of an innovative production gas leakage in the scroll compression chamber, maintains
method known as “Divisible Middle Plate” realises further cooling capacity and reduces power loss.
size/weight reductions and increased capacity while also
answering energy-efficiency needs.
06 07
MORE ADVANTAGES WITH MITSUBISHI ELECTRIC
Joint Lap DC Motor Vector-Wave Eco Inverter
Cleaning-Free* Pipe Reuse
Technology
Mitsubishi Electric has developed a unique This inverter monitors the varying compressor motor frequency
motor, called the “Poki-Poki Motor” in Japan, and creates the most efficient waveform for the motor speed.
which is manufactured using a joint lapping As a result, operating efficiency in all speed ranges is improved,
technique. This innovative motor operates based less power is used, and annual electricity cost is reduced.
on a high-density, high-magnetic force, leading
to extremely high efficiency and reliability. Smooth wave patternSmooth Wave Pattern
Sine-wave drive soft PWM R32 | R410A REFRIGERANT
Inverter size has beenInverter size hasusing
reduced been reduced
insert-
using insert moulding, where
intothe
molding, where the circuit pattern is molded Ability to Use Existing Piping Reduces Pipe Waste and Replacement Time
circuit pattern is moulded into
Magnetic Flux Vector Sine Wave Drive the synthetic resin. To ensure quiet operation,
the synthetic resin. To ensure No need to clean* at the time of system renewal.
soft PWM control is quiet
This drive device is actually a microprocessor that converts usedoperation,
to preventsoft
thePWM
metallic
the compressor motor’s electrical current waveform fromwhine
a associated with conventional
control is used toinverters.
prevent the Chloride residue builds up in existing pipes and becomes a source of trouble. In addition, the iron particles and slime produced as a result
conventional waveform to a sine wave (180°conductance) to metallic whine associated with of compressor failure lead to problems. To counter this, various original Mitsubishi Electric technologies have been combined to enable the
achieve higher efficiency by raising the motor winding utilisation conventional inverters. introduction of “cleaning-free pipe reuse”.
ratio and reducing energy loss.
This feature is available in the PUZ-ZM71-200.
PAM (Pulse Amplitude Modulation)
Reluctance DC Rotary Compressor PAM is a technology that controls the current waveform so that it
Powerful neodymium magnets are used in the rotor of the resembles the supply voltage wave, thereby reducing loss and
realising more efficient use of electricity. Using PAM control, 98% Why Can’t Existing Piping Be Used?
reluctance DC motor. More efficient operation is realised by strong
of the input power supply is used effectively. R22 Refrigerant 1 2 R32 | R410A Refrigerant
magnetic and reluctance torques produced by the magnets.
Without PAM control With PAM control
Without PAM
Without control
PAM control With
With PAM
PAM control
control Problem Problem Result
Supply
DC compressor Neodymium Supply Supply
voltage
voltage
motor (rotor) magnets voltage At time of renewal Chloride residue
Current
Time
Time
High heat generated Accelerated deterioration
Current Time Time during operation of refrigerant oil
Current Time
Increased chloride
Time
At time of residue
PAM adjusts the form of the current wave so that it becomes close to that of the supply compressor failure Refrigerant circuit
PAM adjusts
voltage wave.the form
High of the current
harmonics wave soand
are reduced that98%
it becomes close to is
of the electricity that of the supply
utilized. Iron particles and slime malfunctions and
voltage wave. High harmonics are reduced and 98% of the electricity is utilized. causes failure
Magnetic torque
PAM adjusts the form of the current wave so that it becomes close to that of the supply
+ voltage wave. High harmonics are reduced and 98% of the electricity is utilized.
Reluctance torque Merits of PAM Control
Merits of PAM Control Power increased
Power increased
Efficient voltage increase
Efficientincreased
realises voltage increase
power Cleaning pipe or replacing with new pipe is required
Highly Efficient DC Scroll Compressor Significant energy savings
Merits of PAM Control
realises increased power
PAM
Significant
Remarkable energy savings
reduction in power Power increased
Without PAM control
PAM With PAM control
Higher efficiency has been achieved by adding Remarkable
loss reduction in power Supply
saves electricity Cleaning pipe or replacing with new pipe is required
loss saves electricity
Efficient
voltage
voltageConventional
increase
a frame compliance mechanism to the DC scroll realises increasedConventional
inverter
power
inverter
compressor. The mechanism allows movement Significant energy savings Current
Time
PAM
Remarkable reduction in power
Time
in the axial direction of the frame supporting the
Limited power
cradle scroll, thereby greatly reducing leakage loss saves electricity
Limited energy savings Limited power
Insufficient power Conventional Mitsubishi Electric’s Original Replacement Technologies
and friction loss, and ensuring extremely high Limited energy
Electricity savings
is wasted Insufficient
whenPAM adjusts power
needed inverter
the form of the current wave so that it becomes close to that of the supply
Countermeasure for Problem 1 Countermeasure for Problem 2
Electricity is wasted when needed
efficiency at all speeds. voltage wave. High harmonics are reduced and 98% of the electricity is utilized.
Technology 1: Technology 2:
Power Receiver and Twin LEV Control
Limited
Merits of PAMpower
Control Power increased
Original High-Quality Filtration Friction Reduction (moving parts in compressor)
Limited energy savings Insufficient power Efficient voltage increase
Fixed scroll
Leakage loss (minimum) Mitsubishi Electric has developed a power receiver and twin realises increased power Our original high-quality filtration device called the “Wide Strainer” Friction inside the compressor is reduced by using an original
Electricity is wasted when needed
linear expansion valves (LEVs) circuit thatSignificant
optimisesenergy savings
compressor
Remarkable reduction in power
PAM is equipped inside the refrigerant inlet and outlet pipe. The “Wide Mitsubishi Electric technology called the “Heat Caulking
Frame can
move in direction
Thrust gas power (minimum) performance. This technology ensures optimumloss saves control
electricity in Conventional Strainer” traps iron particles and provides cleaning-free pipe reuse. Fixing Method” or coating the edge of the blade in the scroll
of axis response to Heat Compressor
operating waveform and outdoor temperature. inverter
In addition, improvements to the metal used in the bearings of our compressor, thereby suppressing the increase in temperature
Heat
exchanger Compressor
Thrust friction loss (minimum) Operating efficiency has been enhanced by tailoring the system
exchanger Limited power new scroll compressors provide more robust units. that causes refrigerant oil deterioration.
to the characteristics of R410A refrigerant.
Limited energy savings Insufficient power
Power Technology 1
ElectricityHeat
is wasted when needed
Secondary back-pressure chamber Wide Strainer
Substantial
reduction in leakage
minimises thrust friction loss Power
receiver Original
Heat
exchanger High-quality Filtration “Wide strainer”
receiver exchanger
and friction loss
LEV1 LEV2 Our original high-quality filtration device
Primary back-chamber minimises LEV1 LEV2 called the “Wide strainer” is equipped inside
leakage loss Heat Compressor
the refrigerant inlet and outlet pipe. The
Frame Cradle scroll
exchanger “Wide strainer” traps iron particles and Existing piping can be used without cleaning*
provide
Heat cleaning-free
Compressor pipe reuse. In
exchanger
Grooved
Powerpiping addition, improvements to the metal used in
Heat
Grooved piping
receiver the bearings of our new scroll compressors
exchanger Power Heat
Heat Caulking Fixing Method provide more robust units.
receiver exchanger
To fix internal parts in place, a “Heat Caulking
LEV1 LEV2 LEV1 LEV2
Fixing Method” is used, replacing the former
arc spot welding method. Distortion of internal Cautions when using existing piping
parts is reduced, realising higher efficiency. Pipe image • When removing an old air conditioning unit, please make sure to perform the pump-down process and recover the refrigerant and refrigerant oil.
Grooved Piping
Cross-sectional view Pipe image Grooved piping
• Check to ensure that the piping diameter meets Mitsubishi Electric specifications and piping thickness meets Australian standards.
Cross-sectional view
High-performance grooved piping
Grooved piping • Check to ensure that the flare is compatible with R410A/R32.
isNon-inverter
used in heat exchangers
air conditioner
tooperation of compressor
On/Off
Inverter air conditioner
Optimum control of frequency
increase the heat exchange keeps area.
room temperature keeps preset room temperature
On/Off operation of compressor Optimum control of frequency*Cleaning-Free Pipe Reuse Technology specifically applies to piping which is contaminated with chlorine residue, iron particles and slime.
Non-inverter air conditioner Inverter air conditioner
keeps preset room temperature
DC Fan Motor Change in room
temperature
keeps room temperature
Full power Pipe image Change in room These contaminants are typically found in piping in which the previous system utilised R22 refrigerant. Cleaning-Free Pipe Reuse Technology cannot be
Change in room
Cross-sectional view temperature
A highly efficient DC motor drives the fan of the outdoor unit. temperature Full power Change in room
Minimum power used to clean pipes which contain foreign matter other than what can be generated from an operating air conditioner.
temperature
temperature consumption
Efficiency is much higher than an equivalent AC motor.
temperature
Minimum power
temperature
consumption
Preset
Optimum control of frequency
temperature
On/Off operation of compressor
08 Non-inverter air conditioner Inverter air conditioner
Preset
ON OFF ON OFF ON keeps room temperature keeps preset room temperature
09
Preset
Pipe image
Preset
Change in room
ON OFF ON OFF ON temperature Full power Constant room temperature Change in room
getting too hot getting too cool
Cross-sectional viewgetting too hot temperature
Minimum power
erature
cool
getting too Time Constant room temperature consumption
rature
Compressor operation Compressor operation Time
et
Advanced Technology
for High Efficiency
Econo Cool Energy-Saving Feature Demand Function (Onsite Adjustment) Control Your Comfort
“Econo Cool” is an intelligent temperature control feature that
adjusts the amount of air directed towards the body based on
The demand function can be activated when the unit is equipped with a
commercially available timer or an On/Off switch is added to the CNDM
Anywhere, Anytime
the air-outlet temperature. The setting temperature can be raised connector (option) on the control board of the outdoor unit. Energy
by as much as 2°C without any loss in comfort, thereby realising consumption can be reduced up to 100% of the normal consumption
a 20% gain in energy efficiency. (Function only available during according to the signal input from outside.
manual cooling operation.)
[Example: Power Inverter Series]
Limit energy consumption by changing the settings of SW7-1, SW2 and
Conventional Econo Cool
SW3 on the control board of the outdoor unit. The following settings are
possible.
Ambient Temperature 35°C 35°C
Set Temperature 25°C 27°C SW7-1 SW2 SW3 Energy Consumption
CONTROL
*
Perceived Temperature 30°C 29.3°C OFF OFF 100%
ON OFF 75%
Econo Cool Mode
ON
Controls
A comfortable room environment is maintained even when ON ON 50%
setting the temperature 2°C higher than the conventional
cooling mode. OFF ON 0% (Stop)
*PUZ outdoor only
Demand Response Capable Superior Customisation
Wi-Fi CONTROL*1
Based on the connection of a demand response enabling device This innovative technology places
multiple functions of your
(DRED), Demand Response Mode is activated in response to signals Wi-Fi Control unlocks the door to
sent from the electric power company at times when it is necessary to air conditioner at your fingertips.
smarter heating or cooling, for total Turning the unit On/Off, adjusting
reduce peak demand.
home comfort wherever you are. set temperature, changing mode,
fan speed and airflow direction are
all possible.
This innovative technology connects
AIR QUALITY
your Mitsubishi Electric air conditioner
Fresh-air Intake Long-life Filter to your smartphone, tablet or online
Indoor air quality is enhanced by the direct intake of fresh A special process for the entrapment surface improves the account, giving you the freedom to Develop Operating Rules
Tailor your system to always
exterior air. filtering effect, making the maintenance cycle longer than that of fully control each unit on-the-go via an
units equipped with conventional filters. meet your needs. Unlock
internet connection from anywhere the full potential of your air
High-efficiency Filter
Filter Check Signal in the world. conditioner, program your system
This high-performance filter has a much finer mesh compared to to automatically turn On/Off at
standard filters and is capable of capturing minute particulates Air conditioner operating time is monitored, and the user is
specific times, change settings,
floating in the air that were not previously caught. notified when filter maintenance is necessary.
and develop temperature rules to
*1 Optional upgrade adapter required per unit. ensure superior comfort
AIR DISTRIBUTION Requires an Internet connection and the App downloaded
from the App Store or GooglePlay Store on your smartphone
day after day.
or tablet with the latest Operating System available.
Auto Fan Speed Mode High Ceiling Mode *2 To use Amazon Alexa to control your air conditioner, you will NEW Wi-Fi Voice Control
need an Amazon Echo device.
*3 To use Google Assistant to control your air conditioner, you will with Amazon Alexa and
The airflow speed mode adjusts the fan speed of the indoor unit In the case of rooms with high ceilings, the outlet-air volume can be
need a Google Home smart speaker. Google Assistant
automatically according to the present room conditions. increased to ensure that air is circulated all the way to the floor.
Mitsubishi Electric air conditioning
systems connected with Wi-Fi
Horizontal Vane Wi-Fi FEATURES
Low Ceiling Mode Control*1 are now also Amazon
The air outlet vane swings up and down so that the airflow is Alexa*2 and Google Assistant*3
spread evenly throughout the room. If the room has a low ceiling, the airflow volume can be reduced enabled! This means you can
for less draft. »» View & control from anywhere in the world
enjoy hands-free control.
Vertical Vane »» Enhance energy savings
»» Set up 7 day weekly schedule
The air outlet fin swings from side to side so that the airflow
»» Wireless connection using WPS
reaches every part of the room.
10 11
MA Wall Controller Weekly Timer
Set up to 8 patterns per day including temperature control
Setting Example (Restaurant in summer time)
26
Preparation
1 Busy Off-peak Set to higher temperature
PAR-40MAA Weekly schedule timer can save two different settings which hours
Set to lower temperature
hours
can be easily switched according to different seasons. 25 7 8 Closing time
Temperature setting (°C)
In addition, it offers eight different pattern setting per day. Opening
User-friendly remote contoller with excellent operability and visibility. (On, Off and temperature setting). time
24 2 4 6
*Weekly Timer cannot be used when on/off Timer is in use.
Lunch time Dinner time
23 3 5
Alternate Background Display Night Setback 8-pattern setting
22
The screen background colour can set to black Keep desired room temperatures automatically
to suit the atmosphere of the living environment.
This function monitors the room temperature and automatically 0
10 12 14 16 18 20 22 24 (Time)
activates the heating mode when the temperature drops below Necessary to change temperature settings for cooling/heating times.
*Joint research conducted by Mitsubishi Electric.
the preset minimal temperature setting. It has the same function
for cooling, automatically activating the cooling mode when the
Full Dot Liquid-crystal Display Adopted temperature rises above the preset maximum temperature setting. Rotation, Back-up and 2nd Stage Cut-in Functions* (PAR-40MAA)
PUZ-M71–200
Easier to read thanks to the use of a full dot liquid-crystal display
with backlight, and easier to use owing to adopting a menu format Temperature Range Restriction (1) Rotation and Back-up Functions Operation Pattern
that has reduced the number of operating buttons. Function Outline (Back-up Function Only)
Prevents Overcooling/Overheating
Error occurs on main unit.
Using a temperature that is 1°C lower/higher for cooling/heating • Main and Sub units take turns operating according to a Start operation Main Sub
Display Example (Operation Mode) results in a 10% reduction in power consumption.* Temperature rotation interval setting. Main
Using aRestriction
temperaturelimits
that the
is 1°C lower/higher for heating/cooling unit Run Abnormal condition
Range maximum and minimum temperature • If one unit malfunctions, the other unit automatically begins I/U-1
Full Dot LCD results in a 10% reduction in power consumption.* Temperature operation (Back-up Function).
settings, contributing to the prevention of overcooling/overheating.
Range Restriction limits the maximum and minimum temperature
settings,oncontributing to the prevention of overheating/overcooling. Sub
*Based Mitsubishi Electric laboratory tests in controlled conditions System Image unit Stop Run
*Based on Mitsubishi Electric laboratory tests in controlled conditions System Image
I/U-2
Cooling/Dry (Setting example of minimum temp. in 25˚C)
O/U-1 O/U-2
19˚C 30˚C (Rotation Function) & (Back-up Function)
Main Sub
Possible temperature range setting unit unit Error occurs on main unit.
Start operation Main Sub Sub Main Main Sub
25˚C 30˚C I/U-1 I/U-2 Main
PAR-40MAA Lower temperature limit unit Run Stop Run Abnormal condition
I/U-1
Lower temperatures cannot To prevent excessive cooling
be selected
Energy Efficiency Schedule Sub
O/U : Outdoor Unit unit Stop Run Stop Run
Precise control of power consumption Recommended for: I/U : Indoor Unit
R/C I/U-2
PUZ-M71-200 Offices and Restaurants R/C : Wired Remote Controller 1–28 days 1–28 days
The amount of power consumed in each time period is managed so (When the
(When the request
request codecode "313",
is “313”, each
each unit operates
unit operates alternatively
alternately in daily cycle)
in daily cycle.)
(2) 2ndFunction
Stage Cut-in Function
that the demand value is not exceeded. The demand control function Auto-Return (2) 2nd Stage Cut-in
Function Outline
can be set to start and finish in 5-minute units. Additionally, the level Prevents wasteful operation by automatically returning to the Function Outline Operation Pattern (When Cooling)
• Number of units operating is based on room tem-
can be adjusted to 0, 50, 60, 70, 80 or 90% of maximum capacity, preset temperature after specified operating time • Number of unitsperature
operating
andispredetermined
based on room temperature
settings. 2nd Stage Cut-in Function
and up to 4 patterns can be set per day. Air conditioning operation and predetermined
After adjusting the temperature for initial cooling on a hot summer • Whensettings.
room temperature rises above the desired > Set point
is automatically controlled to ensure that electricity in excess of the Room temp. = Room temp. > = Set point –4°C
day or heating in winter, it is easy to forget to return the temperature setting, therises
• When room temperature standby unitthe
above starts (2-unitsetting,
desired operation). Start operation Sub unit starts operation Sub unit stops
contracted volume is not consumed. • When the(2-unit
room temperature
setting to its original value. The Auto-Return function automatically the standby unit starts operation). falls 4°C below the pre- Main
resets the temperature back to the original setting after a specified determined setting, the standby unit stops (1-unit unit Run
Setting pattern example • When the room operation).
temperature falls 4°C below the I/U-1
period of time, thereby preventing overcooling/overheating. predetermined setting, the standby unit stops (1-unit
Start time Finish time Adjusted capacity level System Constraint
The Auto-Return activation time can be set in 10-minute units, operation). Sub
8:15 12:00 80% in a range between 30 and 120 minutes. • This function is only available for rotation operation unit Stop Run Stop
and when the back-up function is in cooling mode. I/U-2
*Auto-Return cannot be used when Temperature Range Restrictions is in use.
System Constraint
12:00 13:00 50%
• This function is only available for rotation operation and
13:00 17:00 90% when the back-up function is in cooling mode.
Auto-Off Timer
17:00 21:00 50% Turns cooling/heating off automatically after preset time elapses *Applicable to PKA, PCA, PLA and PEAD indoor units only.
When using Auto-Off Timer, even if one forgets to turn off the unit,
operation stops automatically after the preset time elapses, thereby Easy Maintenance Function
Operation Lock PUZ-ZM71–200
preventing wasteful operation. Auto-Off Timer can be set in 10-minute
Fixed temperature setting promotes energy efficiency
units, in a range between 30 minutes and 4 hours, eliminating all • Monitor operation data of the indoor and outdoor units via the remote controller.
In addition to operation start/stop, the operation mode, temperature anxiety about forgetting to turn off the unit. Remote controller also lets you set the operating frequency, allowing easier inspection.
setting and airflow direction can be locked. Unwanted adjustment of Recommended for:
temperature settings is prevented, and an appropriate temperature Compressor Outdoor Unit Indoor Unit
Meeting Rooms and Changing Rooms
is constantly maintained, leading to energy efficiency. This feature is 1. Accumulated operating time (×10hr) 4. Heat exchanger temperature (°C) 7. Intake-air temperature (°C)
also useful in preventing erroneous operation or tampering.
Recommended for: 2. Number of on/off times (×100 times) 5. Discharge temperature (°C) 8. Heat exchanger temperature (°C)
Offices, Schools, Public Halls, Hospitals, Computer Server Facilities
3. Operating current (A) 6. Outdoor-air temperature (°C) 9. Filter operating time* (hr)
12 *The filter operating time is the time elapsed since the filter button was reset.
13
Zone Controller Easy to See and Use
• A large, full-dot liquid-crystal screen is incorporated,
simplifying touch panel operation.
PAC-ZC40/80L-E, PAC-ZC40/80H-E • The backlight makes operation in dark rooms possible.
Main Screen Zone Control Screen
Operation of up to 8 dampers. Occupancy and brightness sensors provide greater comfort while
improving energy-saving performance.
Control Operation of up to 8 Dampers
By controlling the operation of up to eight dampers, excessive power consumption to condition unoccupied areas and areas where air
conditioning is not needed can be prevented. Detailed control makes it possible to set operation to suit the user’s needs.
Actual size 120x140x25mm (HxWxD)
Oven
WIP Kitchen Living Occupancy and Brightness Sensors
PEAD/
PEA Veranda Occupancy sensors equipped with the controller can detect
when you leave the room. By then automatically switching into
energy-saving mode the Zone Controller turns the air conditioner
Media off, leading to potential energy savings.
Dining
Brightness sensors detect when a room changes between light
and dark and energy-saving
with amode can beandenabled accordingly.
Air Air Porch Entry
Robe Bed 4
The controller
Dayused
that are
is equipped
and time settings combined
to determine
occupancy
if the roomwithisthe
brightness
brightness
occupied.
sensors
sensors
When can is
no one
Intake Outlet WR
Robe
in theberoom,
used operation
to automatically turn the
switches air conditioner off
to energy-saving when Excellent
mode. lights
Oven Robe for ensuring that off.
are switched the air conditioning gets turned off, and thereby
WIP Kitchen Living contributing to further energy savings.
Bed 3 When “Zone Control” mode is selected among the energy-saving mode settings
PEAD/ Master suite Home theater Bed 2
PEA Veranda shown below.
The damper is closed.
Media
LED Indicator
Dining
The LED indicator in the lower part of the controller clearly shows
The LED indicator in the lower part of the controller clearly shows the operation mode. Easily confirm if the air conditioning is On or Off
fromthe operation mode. Easily confirm if the air conditioning is on or off
a distance.
*Setfrom a distance.
Robe Bed 4
to all green *Set to
display before shipping. all green display before shipping.
Robe
Brightness
Robe
sensor: If room light is on, energy-saving control is deactivated.
me theater Bed 2 Occupancy
Bed 3 Sensor: Judges whether or not someone is in the room by detecting human motion.
If the room is unoccupied, air conditioning is switched to energy-saving mode.
Touch panel with backlight: A 4.3-inch touch-panel liquid-crystal screen with a backlight has
been incorporated.
Occupancy Sensor
Temperature sensor: Monitors the temperature near the remote controller.
PAR-ZC01M-E Remote Controller
Wall 10m
LED indicator: Indicates the operation mode or room temperature using colours. PAR-ZC01M-E
*Setting is required. Remote Controller
110˚
10m 10m
11˚
20˚ 31˚
Wi-Fi Compatibility Schedule Setting
Can be operated from tablet, smartphone, etc. • Built-in weekly schedule function can control turning the 110˚
Floor
Zone Controller air conditioner on and off, and the opening and closing of each
Detection distance, right/left detection angle Up/Down detection angle
damper. Up to eight patterns can be set for each week, enabling
PAC-ZC 40H-E 240 Volt AC 4 zones (max.) operation suitable for each time zone to be set.
Energy Saving Mode
PAC-ZC 80H-E 240 Volt AC 8 zones (max.) • Night setback function is incorporated. If the room temperature
Energy-Saving Mode settings can be selected (see table below)
PAC-ZC 40L-E 24 Volt AC 4 zones (max.) is outside of the temperature range setting, heating or cooling
PAC-ZC 80L-E 24 Volt AC 8 zones (max.)
operation starts automatically. This can prevent condensation or Deactivate Even if no one is detected, Energy Saving Mode is not set
excessive temperature rise in the room. Temperature The slide to set desired temperature from presently
setting slide set temperature
Optional Parts
Reduce Airflow Set airflow to "Low"
Wi-Fi Control Interface MAC-568IF-E
Operation/Stop Stop operation
Remote Sensor PAC-SE4ITS-E
Zone control Turn off target zone settings
Zone Remote Controller PAR-ZC01M-E
14 15
SYSTEM CONTROLS (SUZ and Mr. Slim Power Inverter only) SYSTEM CONTROLS (SUZ and Mr. Slim Power Inverter only)
Versatile system controls can be realised by using optional parts, relay circuits, control panels, etc. Versatile system controls can be realised by using optional parts, relay circuits, control panels, etc.
MAJOR SYSTEM CONTROL FOR P SERIES AND S SERIES INDOOR UNITS
System Examples System Examples
Major Optional
Indoor Unit S Series & P Series Major Optional Wired Wireless Details
Indoor Unit
P Series Indoor Unit Details Parts Required
Parts Required Remote Controller Remote Controller
Outdoor Unit
Controller
S Series & MXZ Series Outdoor P Series Outdoor A
A • Wired Remote Controller
2 Remote PAR-40MAA, PAC-YT52CRA
• Up to two remote controllers can be (for PKA, PAC-SH29TC-E is required)
PAR-40MAA Controller Control connected to one group.
• PAR-40MAA-J PAR-SL97A-E
Control Standard equipment With two remote
(Wired remote controller) • Wireless Remote Controller
(for indoor units compatible controllers, control
PAC-YT52CRA • PAC-YT52CRA PAR-40MAA-J PAR-40MAA-J • Both wired and wireless remote PAR-SL97A-E (for SEZ and PLA-RP)
with wired remote controllers) can be performed PAC-YT52CRA
(Wired remote controller) PAC-YT52CRA controllers can be used in
Control PAR-40MAA-J locally and remotely combination.
PAC-YT52CRA * When using wired and wireless
from two locations. * Set "Main" and "Sub" remote controllers • Wireless Remote Controller Kit for
remote controllers. PCA PAR-SL948-E
(Example of Simultaneous Twin)
B (Example of 1 : 1 system)
• One remote controller can
control plural air conditioners
S Series Outdoor Unit B
• MAC-334IF-E/MAC-397IF-E
with the same settings (Interface) Relay box (to be purchased locally) Relay box (to be purchased locally)
Operation Control • Operation other than On/Off • Adapter for remote On/Off
simultaneously.
PAC-SE55RA-E
by Level Signal Adapter for Adapter for
remote
e.g. adjustment of temperature,
remote fan speed, and airflow) can be
• PAR-40MAA On/Off On/Off
• One remote controller can Air conditioner can be performed even when remote
(Wired remote controller) • Relay box
MAC-397IF-E control up to 16 refrigerant started/stopped remotely. controller operation is prohibited.
MAC-333IF-E (to be purchased locally)
systems (when connected to an In addition, On/Off
System Remote Remote
MXZ unit, MAC-397IF-E is counted operation by the local control control
Group as one system). • PAC-YT52CRA remote controller can be panel Wired remote panel PAR-SL97A-E • Timer control is possible with an • Remote control panel
PAR-40MAA-J PAR-40MAA-J (Wired remote controller) controller external timer.
Control prohibited/permitted. (to be purchased locally)
PAC-YT52CRA PAC-YT52CRA (Example of 1 : 1 system x 2) (Example of 1 : 1 system x 2)
• Up to two remote controllers
can be connected. P Series Outdoor Unit
• PAR-40MAA-J
(Wired remote controller)
C
• PAR-SL100A cannot be used Relay box (to be purchased locally) Relay box (to be purchased locally) • Connector cable for remote display
when connected through the PAC-SA88HA-E/PAC-725AD
C MAC-397IF-E, or when group Connector
cable for
Connector
cable for • The pulse signal can be turned (10 pcs. x PAC-SA88HA-E)
control is used. remote remote On/Off.
Operation Control display display
• Relay box
by Pulse Signal (to be purchased locally)
Remote Remote • Operation/emergency signal can be
control control received at a remote location.
panel Wired remote panel PAR-SL97A-E
controller • Remote control panel
Outdoor Outdoor (Example of 1 : 1 system x 2) (Example of 1 : 1 system x 2) (to be purchased locally)
unit unit S Series Outdoor Unit
Indoor Indoor • MAC-334IF-E
unit unit
• MELANS System controller
Indoor unit Indoor unit
• PAC-SC51KUA D Remote operation adapter/ Remote operation adapter/ • Remote display panel
City Multi PAR-40MAA-J PAR-40MAA-J Connector cable for remote display +
indoor unit (power supply unit) Connector cable for remote display + (to be purchased locally)
PAC-YT52CRA PAC-YT52CRA Relay box Relay box • Operation/emergency signal can be
Group of air conditioners can be
PAR-40MAA-J PAR-40MAA-J
PAR-40MAA-J PAR-40MAA-J received at a remote location (when
M-NET Connections PAC-YT52CRA PAC-YT52CRA
PAC-YT52CRA PAC-YT52CRA controlled by MELANS system P Series Outdoor Unit
Remote Display of • Connector cable for remote display
controller (M-NET). •P AC-SJ95MA-E (M-NET channeled through the
Operating Status PAC-SA88HA-E/ PAC-725AD
MAC-333IF-E converter)
(10 pcs. x PAC-SA88HA-E)
MELANS Operating status can PAC-SF40RM No-voltage signal,
system controller MELANS M-NET adapter • MELANS System controller
AE-200E system controller PAC-SF81MA-E be displayed at when channeled through the
•P AC-SC51KUA (power supply • Relay box (to be purchased locally)
AE-200E a remote location.
unit) Remote Remote • Remote operation adapter
display display
panel panel PAC-SA88HA-E 12V DC signal). PAC-SF40RM
PAC- PAR-40MAA-J PAR-SL97A-E
YT52CRA *Unable to use with wireless remote
controller.
(Example of 1 : 1 system) (Example of Simultaneous Twin)
E • Weekly Timer: On/Off and up to 8
pattern temperatures can be set for
each calendar day. (Initial setting)
Timer Operation: • On/Off Timer: On/Off can be set
once each within 72hr. in intervals
Allows On/Off
of 5-minute units.
operation with timer
- Standard functions of PAR-40MAA
*For control by an external PAR-40MAA-J • Auto-Off Timer: Operation will be
timer, refer to B: Operation
Control by Level Signal. switched off after a certain time
elapse. Set time can be changed
(Example of 1 : 1 system) from 30 min. to 4 hr. at 10 min.
intervals.
*Simple Timer and Auto-off Timer cannot
be used at the same time.
16 17
SLZ Series SEZ Series
4-WAY CEILING CASSETTE COMPACT BULKHEAD
SLZ-KF25/35/50/60VA3 SEZ-KD25/35/50/60/71VAQ(L)
Provides a smart solution to comfort and efficient air conditioning. Our ultra-compact design saves installation space and provides a flexible solution.
New Design Compact Ceiling-concealed Units Impressively Quiet
The straight-line form introduced has resulted in a beautiful Detects occupants Only the intake-air grille and outlet vents are visible when S Series units offer quiet operation at a hushed noise level
square design. Its high affinity ensures the ability to blend in 3D i-see Sensor detects the occupancy of people in the room using this ceiling-concealed indoor unit. The rest of the unit is of 23dB (SEZ-KD25/35), ensuring a calm and comfortable
seamlessly with any interior. The indoor unit is an ideal match for and sets the air conditioning settings accordingly. This makes conveniently hidden in the ceiling cavity, essentially leaving the environment.
office or store use. Of course, design matched 2x2 (600mm x automatic power-saving operation possible in places where the ceiling and walls free of bulky looking devices and maintaining They’re so quiet that you may find yourself checking to see if
600mm)600 mm
ceiling 600 mm
construction specifications. number of people entering and exiting is large. Additionally, a high-class interior décor. The compact units require minimal they’re on.
when the area is continuously unoccupied, the system switches space and can be installed in buildings with lowered ceilings,
where exposed units were the rule in the past. Noise Level
to a more enhanced power-saving mode. Depending on the
600 mm 600 mm setting, it will save additional capacity or stop operation together.
A Air inlet
Quiet
Sound Human
Train Passenger Library
B Air outlet of Rustling Hearing Limits
Interior Car Interior Interior
Detects people's position Leaves (Extremely Quiet)
C Access door (40km/h)
Once the position of a person is detected, the duct angle of
D Ceiling surface
E Canvas duct
the vane is automatically adjusted in that direction. Each vane F Air filter
can be independently set to "Indirect Airflow" or "Direct Airflow" G Inlet grille 80dB 60dB 40dB 23dB 20dB 10dB
according to taste.
245 mm
Horizontal Airflow Detects number
Drain Pump (Optional)
of people
The new airflow control completely eliminates that uncomfortable
* As of Aug 2015. Among compact 4-way cassettes The PAC-KE07DM-E drain pump is now available as an option.
drafty-feeling with
for system ceiling. (Anthe introduction
incompany of a horizontal airflow that spreads
investigation.)
245 mm With the pump, a drain hose length of up to 550mm can be used,
across the ceiling - the ideal airflow for offices and restaurants. Detects people’s adding to increased installation possibilities.
Airflow distribution* position
SLZ-KF60VA
* As of Aug 2015. |Among
Flowcompact
angle,4-way
cooling at 20°C
cassettes (ceiling height 2.7m)
Horizontal
for system ceiling. (An incompany investigation.)
Ceiling height : 2.7 m
(m/s) Detects position
2.7 2.0 (m/s) 2.0 and number of people 360°
1.0 1.0 Cold wind Detection
0.5 0.5 does not
Detects floor
2 temperature
bother. 2.7m
Height (m)
Horizontal 7.2m
Ceiling height : 2.7 m 8 sensors
2.71
Horizontal Horizontal (m/s) 1.1m
2.0 2.0
0.5
1.0 airflow airflow 1.0
0.5
Cold wind 12m
8 7 6 4 53 2 1 1 2 3 4 5 6 7 8
does not
2 bother.
Height (m)
0 Floor surface *In case of a 2.7m ceiling
4 3 2 1 0 1 2 3 4
Horizontal(m)
Floor distribution Floor distance Horizontal
(m)
*Vane angle: Horizontal
1
18 airflow airflow
19
0
4 3 2 1 0 1 2 3 4
Floor distance (m)PLA Series PEAD Series
4-WAY CEILING CASSETTE CEILING-CONCEALED
PLA-M71/100/125/140EA PEAD-M71/100/125/140JAAD
The thin, ceiling-concealed indoor units of the PEAD series is the
Advancements in PLA Series improve style and performance for indoor comfort. answer for the air conditioning requirements of buildings with minimum
ceiling installation space and wide-ranging external static pressure.
Automatic Grille Lowering Function (Optional) Energy-saving efficiency has been improved, thereby reducing
Detects occupants
An automatic grille lowering function is electricity consumption and contributing to a further reduction in
available for easy filter maintenance.
3D i-see Sensor detects the occupancy of people in the room Special wired and wireless remote Detects number operating cost.
and sets the air conditioning settings accordingly. This makes of people
controllers can be used to lower the intake
1.2m
automatic power-saving operation possible in places where the grille for maintenance. 1.6m
number of people entering and exiting is large. Additionally, Lighter Weight Wide Selection of Fan Speeds and External
when the area is continuously unoccupied, the system switches Grille Elevation Remote
Controller (comes with the 2.0m Compared to the previous PEA-RP·EAQ (7.1kW-14.0kW) Static Pressure
to a more enhanced power-saving mode. Depending on the automatic elevation panel) Detects people’s models, the unit weight has been reduced by an average of Five-stage external static pressure conversions and three fan speed
setting, it will save additional capacity or stop operation together.
position
2.4m
27kg. This significant weight reduction allows for increased selections are available. Capable of being set to a maximum of
ease of installation. 125Pa, units are applicable to a wide range of building types.
Detects people's position 2.8m
Once the position of a person is detected, the duct angle of 3.2m
the vane is automatically adjusted in that direction. Each vane Drainage Pump Installed as Standard High Energy-Saving Efficiency
can be independently set to "Indirect Airflow" or "Direct Airflow" Detects position 3.6m
360° The drainage pump can lift water up to 700mm from the Compared to the previous PEA-RP·EAQ (7.1kW-14.0kW) models,
according to taste. and number of people
4.0m
Detection lower surface of the indoor unit's main body. PEAD-RP models achieve enhanced energy efficiency through
Detects floor adopting a highly efficient DC fan motor. This contributes to a
Wired remote controller Wireless remote controller
temperature 2.7m
(PAR-40MAA) (PAR-SL100A-E) reduction in electricity consumption.
Detects number 7.2m
of people 8 sensors Automatic elevation to four meters
1.1m
Horizontal Airflow 491mm Capacity
Rated
Previous PEA-RP PEAD-M
EER/COP
12m Max.
Detects people’s The new airflow control removes that uncomfortable drafty 700mm
Rated EER 2.86 3.50 22% UP
8
position
8 7 6 4 53 2 1 1 2 3 4 5 6 7
feeling with the introduction of a horizontal airflow that spreads 7.1 kW
across the ceiling - the ideal airflow for offices and restaurants. 209mm Rated COP 3.35 4.00 19% UP
Floor surface *In case of a 2.7m ceiling
Airflow distribution* Rated EER 3.28 3.61 10% UP
Detects position 10.0 kW
360° Rated COP 3.54 4.12 16% UP
and number of people
Detection PLA-M140EA | Cooling at ceiling height of 3.2m
Detects floor
temperature 2.7m Indoor Unit Rated EER 2.95 3.33 13% UP
(m/s)
7.2m 3.2 3.0 12.5 kW
2.0
8 sensors 3 1.0 Rated COP 3.64 4.00 10% UP
1.1m 0.5
Rated EER 2.90 3.32 14% UP
12m 14.0kW
8 7 6 4 53 2 1 1 2 3 4 5 6 7 8 2
Height (m)
Rated COP 3.74 3.96 6% UP
Floor surface *In case of a 2.7m ceiling
1
0 1 2 3 4 5
20 Floor distance (m)
21PEA Series PCA Series
CEILING-CONCEALED CEILING-SUSPENDED
PEA-M100/125/140GAA, PEA-RP170/200WJA/250WHA PCA-M50/60/71/100/125/140KA
In addition to the conventional 4-speed setting, units are now
A stylish indoor unit design and airflow settings for both high
For elegance and style, the PEA Series compliments the room with aesthetically equipped with an automatic air-speed adjustment mode. This set-
and low ceiling interiors expand installation possibilities.
ting automatically adjusts the air-speed to conditions that match
pleasing ceiling installation and a vast line-up of performance functions.
t h e
Stylish Indoor Unit Design room environment. At the start of heating/cooling
Drain Pump operation,
Installation the
Possible
Freedom in Installation Flexible Duct Design Enables Use of High-pressure
Versatile and easy installation is possible; for example, it is possi- A stylish square-like design is adopted for the indoor units of all airflow is set to high-speed to quickly heat/coolDrainage the room. When
Static Fan Optional Drain Pump for outlet
bleVersatile andthe
to adjust easy installation
distance is possible;
between for example,
the air-intake it isair-outlet
and possible models. As a result, the units blend in better with the ceiling. Thethe room height
pumping tempera-of the optional drain can be 600mm
to adjust the distance between the air-intake
vents to create the optimal airflow configuration. and air-outlet vents to A flexible duct design and 150Pa external static high-pressure are Full-Capacity
ture reaches the de- Models above ceiling
create the optimal airflow configuration. A flexible duct design and 150Pa external
incorporated. static
The increased high-pressure
variation are
in airflow options ensures pump has The
been
pumping
increased
height of
from
the
400mm
optional
surface
sired setting, the
incorporated. The increased variation
operation in airflow
that best matches virtually options ensures
all room layouts. to 600mm, expanding
drain pump has been
airflow speed is de-
flexibility in choos-
increased from Ceiling
surface
operation that best ing unit location
400mm toduring
600mm,installation work.
expanding flexibility
creased automatical-
in choosing unit location during
matches virtually all PCA-GA PCA-KA ly for installation
stable comfort-
work.
Outside Air-Intake Characteristics
room layouts. 50
Static pressure (Pa)
L-shaped room
Long
Long
� rectangular
rectangular room
room Room
� Room with fixed
with fixed ceiling � L-shaped room Equipped with Automatic Air-Speed Adjustment Fresh Outside-Air Intake
0
–50
ceiling fixtures
fixtures –100
In addition to the conventional 4-speed setting, units are now Units Units
are equipped withwith
are equipped a knock-
a –150 PCA-RP100–140KA
–200 PCA-RP60/71KA
equipped with an automatic air-speed adjustment mode. out hole that enables the
knock-out hole that enablesinduc- –250 PCA-RP50KA
Easier Handling This setting automatically adjusts the air-speed to conditions tion ofthe
fresh outside-air.
induction of fresh outside-air.
–300
0 1 2 3 4
Airflow volume (m 3/min)
The new ducted fan coil unit (PEA-RP170/200/250) now has a that match the room environment. At the start of the cooling/
two-piece construction. This allows separation of the indoor unit heating operation, the airflow is set to high-speed to quickly
heat exchanger and the fan deck assembly for easier handling in cool/heat the room. Equipped with High/Low Ceiling Modes
the roof space. Units are equipped with high and low ceiling operation modes that
When the room temperature reaches the desired setting, the
make it possible to switch the airflow volume to match room height.
unit airflow speed is decreased automatically for stable comfortable
The ability to choose the optimum airflow volume makes it possible
has cooling/heating operation.
Computerised Dehumidification to optimise the breezy sensation felt throughout the room.
his Must be reassembled and installed prior
to using the system.
The fan speed is controlled electronically in dry mode, increasing
oor the range and efficiency of dehumidification.
Capacity High Ceiling Standard Ceiling Low Ceiling
the Strong Gentle 50 3.5m 2.7m 2.5m
sier 60 3.5m 2.7m 2.5m
. 71 3.5m 2.7m 2.5m
100 4.2m 3.0m 2.6m
Start of cooling/heating… After room temperature is stabilized…
125 4.2m 3.0m 2.6m
140 4.2m 3.0m 2.6m
22 23PKA Series Function List
WALL-MOUNTED
Standard Optional - Not Available
Combination P Series
PEA-M100/ PEA-
PLA- PEAD- PEA- PKA-M71/ PCA-M50/60/
Indoor Unit 125/140 RP170/
M71/100/125/140EA M71/100/125/140JAAD RP250WHA 100KAL 71/125/140KA
GAA 200WJA
Category
SUZ-
Outdoor Unit SUZ-KA PUZ-ZM SUZ-KA PUZ-ZM PUZ-ZM PUZ-RP PUHZ-RP PUZ-ZM PUZ-ZM
KA
DC Inverter
Joint Lap DC Motor 71 71 71 - - 71 71
Magnetic Flux Vector Sine Wave Drive - - - -
Reluctance DC Rotary Compressor 71 71 71 - - 71 71
Highly Efficient DC Scroll Compressor - 100-140 - 100-140 100-140 100 - 100-140
Technology Heating Caulking (Compressor) 71 71 - - - 71 71
DC Fan Motor
Vector-Wave Eco Inverter - - -
PAM (Pulse Amplitude Modulation) - -
Power Receiver and Twin LEV Control - - - - -
Grooved Piping
Felt Temperature Control (3D i-see Sensor) - - - - - - - -
i-See Sensor
AREA Temperature Monitor - - - - - - - -
PKA-M71/100KAL Energy Demand Function - - -
Saving Demand Response Capable
Elegant design and compact dimensions are ideal for Fresh-Air Intake - - - - - -
Air High-Efficiency Filter - - - - - -
offices and stores. Quality Long-Life Filter - - - -
Filter Check Signal - - -
Horizontal Vane (Auto Swing) - - - - -
Flat Panel & Pure White Finish Wired Remote Controller Available (Optional) Auto Vane - - - - -
A flat panel layout has been adopted for all models. Pursuing a A optional wired remote controller and a terminal block are available Air
High Ceiling Mode - - - - - -
Distribution
design that harmonizes with virtually any interior, the unit colour has to suit various installation sites. Low Ceiling Mode - - - - - -
been changed from white to pure white. Auto Fan Speed Mode - - -
Installation
Drainof Pump
the drainOption pump enables
Available with a All
drain outlet as high as
Models
On/Off Operation Timer
Auto Change Over
Quick Clean Grille 800mm Installation
above the of thebase of the
drain pump indoor
enables unit.
a drain Drain
outlet as highwater
as can be Auto Restart
The intake grille filter can easily slide out completely. This allows easy
discharged800mm easily
above even
the baseifofthe surface
the indoor where
unit. Drain waterthe
can wall-mounted
be
The intake grille filter can easily slide out completely, allowing easy Convenience Low-Temperature Cooling
cleaning without any special tools (can be washed in water). discharged easily even if the surface where the wall-mounted unit
unit does not have direct access outside, increasing the degree
cleaning without any special tools making it easy to clean in minutes, washing Low-Noise Operation (Outdoor Unit) - - -
in water. does not have direct access outside, increasing the degree of Ampere Limit Adjustment - - - - - - - - - -
of freedom for for
freedom installation.
installation. Operation Lock - - - - - - - - - -
PAR-40MAA-J Control *1
PAC-YT52CRA Control *1
Drain Pump System
Centraliesd On/Off Control *1
Indoor Unit Control
System Group Control *1
800mm
Front Grille M-NET Connection *1
Cleaning-free Pipe Reuse
Filter Reuse of Existing Wiring - - -
Wiring/Piping Correction Function - - - - - - - - - -
Installation
Drain Pump - - -
Pump Down Switch - - -
Flare Connection
Self-Diagnosis Function (Check Code Display)
Maintenance
Failure Recall Function
*1 Please refer to "System .Control" on pages 16 and 17 for details.
* If a numerical figure is listed, the feature is only available with the outdoor unit of that capacity.
24 25SPECIFICATIONS SPECIFICATIONS
4-way Ceiling Cassette (PLA Series) Ceiling-Concealed (PEAD Series)
Indoor Unit PLA-M71EA-A PLA-M100EA-A PLA-M125EA-A PLA-M140EA-A Indoor Unit PEAD-M71JAAD PEAD-M100JAAD PEAD-M125JAAD PEAD-M140JAAD
Outdoor Unit SUZ-KA71VAD2 PUZ-ZM71VHA-A PUZ-ZM100VKA-A PUZ-ZM100YKA-A PUZ-ZM125VKA-A PUZ-ZM125YKA-A PUZ-ZM140VKA-A PUZ-ZM140YKA-A Outdoor Unit SUZ-KA71VAD2 PUZ-ZM71VHA-A PUZ-ZM100VKA PUZ-ZM100YKA PUZ-ZM125VKA PUZ-ZM125YKA PUZ-ZM140VKA PUZ-ZM140YKA
Refrigerant R410A R32 Refrigerant R410A R32
Power Supply V: 230V, Single-phase, 50Hz Y: 400V, Three-phase, 50Hz Power Supply V: 230V, Single-phase, 50Hz Y: 400V, Three-phase, 50Hz
Capacity [Min-Rated-Max] (kW) 2.8 - 7.1 - 8.1 3.3 - 7.1 - 8.1 4.9 - 10.0 - 11.4 4.9 - 10.0 - 11.4 5.5 - 12.5 - 14.0 5.5 - 12.5 - 14.0 6.2 - 13.5 - 15.3 6.2 - 13.5 - 15.3 Capacity [Min-Rated-Max] (kW) 2.8 - 7.1 - 8.1 3.3 - 7.1 - 8.1 4.9 - 10.0 - 11.4 4.9 - 10.0 - 11.4 5.5 - 12.5 - 14.0 5.5 - 12.5 - 14.0 6.2 - 14.0 - 15.3 6.2 - 14.0 - 15.3
Total Input [Rated] (kW) 2.07 1.78 2.43 3.06 3.55 3.55 3.93 3.93 Total Input [Rated] (kW) 2.10 1.85 2.67 3.13 3.66 3.66 4.37 4.37
AEER/EER 3.39 / 3.43 3.77 / 3.98 3.95 / 4.11 3.11 / 3.26 3.42 / 3.52 3.37 / 3.52 3.34 / 3.43 3.30 / 3.43 AEER/EER 3.34 / 3.38 3.63 / 3.83 3.60 / 3.74 3.04 / 3.19 3.32 / 3.41 3.28 / 3.41 3.13 / 3.20 3.09 / 3.20
AEER [Part-load %] *1 - - - 4.40 - - - - AEER [Part-load %] *1 - - - 4.23 - - 4.20 4.09
Cooling Cooling
Running Current [Rated] A 9.28 8.10 11.10 5.10 16.60 5.50 18.07 6.40 Running Current [Rated] A 10.49 10.33 12.20 5.20 16.70 6.40 19.77 7.40
Sound In (Lo-Mid-Hi) 28 - 30 - 32 - 34 28 - 30 - 32 - 34 31 - 34 - 37 - 40 31 - 34 - 37 - 40 33 - 37 - 41 - 44 33 - 37 - 41 - 44 36 - 39 - 42 - 44 36 - 39 - 42 - 44 Sound In (Lo-Mid-Hi) 30 - 34 - 39 33 - 38 - 42 36 - 40 - 44 40 - 44 - 49
Pressure dB(A) Pressure dB(A)
Level *3 Out (PWL) 55 (69) 47 (67) 49 (69) 50 (70) 50 (70) 50 (70) 50 (70) 50 (70) Level *3 Out (PWL) 55 (69) 47 (67) 49 (69) 50 (70) 50 (70) 50 (70) 50 (70) 50 (70)
Air Volume (In) Lo-Mid-Hi L/S 267-283-317-350 267-283-317-350 317-383-433-483 317-383-433-483 350-417-467-517 350-417-467-517 400-433-483-533 400-433-483-533 Air Volume (In) Lo-Mid-Hi L/S 292 - 350 - 417 400 - 483 - 567 492 - 592 - 700 533 - 650 - 767
Capacity [Min-Rated-Max] (kW) 2.6 - 8.0 - 10.2 3.5 - 8.0 - 10.2 4.5 - 11.2 - 14.0 4.5 - 11.2 - 14.0 5.0 - 14.0 - 16.0 5.0 - 14.0 - 16.0 5.7 - 16.0 - 18.0 5.7 - 16.0 - 18.0 Capacity [Min-Rated-Max] (kW) 2.6 - 8.0 - 10.2 3.5 - 8.0 - 10.2 4.5 - 11.2 - 14.0 4.5 - 11.2 - 14.0 5.10 - 14.0 -16.0 5.10 - 14.0 - 16.0 5.7 - 16.0 - 18.0 5.7 - 16.0 - 18.0
Total Input [Rated] (kW) 2.19 2.03 2.94 3.05 3.58 3.58 4.48 4.48 Total Input [Rated] (kW) 2.04 1.93 2.80 3.06 3.52 3.52 4.18 4.18
ACOP/COP 3.61 / 3.65 3.75 / 3.94 3.68 / 3.80 3.50 / 3.67 3.80 / 3.91 3.75 / 3.91 3.49 / 3.57 3.45 / 3.57 ACOP/COP 3.87 / 3.92 3.93 / 4.14 3.86 / 4.00 3.49 / 3.66 3.86 / 3.97 3.81 / 3.97 3.73 / 3.82 3.69 / 3.82
ACOP [Part-load %] *1 - - - - - - - - ACOP [Part-load %] *1 - - - - - - - -
Heating Heating
Running Current [Rated] (mm) 9.82 9.89 14.02 5.10 16.30 5.90 21.14 7.20 Running Current [Rated] (mm) 10.08 8.80 12.70 5.10 16.00 6.20 18.80 7.10
Sound In (Lo-Mid-Hi) dB(A) 28 - 30 - 32 - 34 28 - 30 - 32 - 34 31 - 34 - 37 - 40 31 - 34 - 37 - 40 33 - 37 - 41 - 44 33 - 37 - 41 - 44 36 - 39 - 42 - 44 36 - 39 - 42 - 44 Sound In (Lo-Mid-Hi) dB(A) 30 - 34 - 39 33 - 38 - 42 36 - 40 - 44 40 - 44 - 49
Pressure Pressure
Level *3 Out (PWL) dB(A) 55 (68) 51 (70) 51 (69) 52 (70) 52 (70) 52 (70) 52 (71) 52 (71) Level *3 Out (PWL) dB(A) 55 (68) 51 (70) 51 (69) 52 (70) 52 (70) 52 (70) 52 (71) 52 (71)
Air Volume (In) Lo-Mid-Hi 267-283-317-350 267-283-317-350 317-838-433-483 317-383-433-483 350-417-467-517 350-417-467-517 400-433-483-533 400-433-483-533 Air Volume (In) Lo-Mid-Hi 292 - 350 - 417 400 - 483 - 567 492 - 592 - 700 533 - 650 - 767
Max. Running Current A 16.00 19.27 27.96 11.96 28.16 12.16 29.16 12.16 Max. Running Current A 16.00 20.28 29.18 13.18 29.90 13.90 31.10 14.10
Input [Rated] kW 0.04 0.04 0.07 0.07 0.10 0.10 0.10 0.10 Input [Rated] kW 0.17 / 0.15 0.25 / 0.23 0.36 / 0.34 0.39 / 0.37
Dimensions [HxWxD] mm 258 x 840 x 840 298 x 840 x 840 Dimensions [HxWxD] mm 250 X 1100 X 732 250 X 1400 X 732 250 X 1400 X 732 250 X 1600 X 732
Indoor Indoor
Unit Unit
Panel [HxWxD] mm 40 x 950 x 950 Weight kg 30 29 40 44
Weight [Panel] kg 21 (5) 24 (5) 27 (5) Static Pressure Pa 35 / 50 / 70 / 100 / 125
Dimensions [HxWxD] mm 880 x 840 x 330 943x950x300(+25) 1338 x 1050 x 330 (+40) 943 x 950 x 300
Dimensions [HxWxD] mm 880 x 840 x 330 1338 x 1050 x 330 (+40)
(+25)
Outdoor
Weight kg 54 70 113 114 113 114 113 114 Outdoor
Unit Weight kg 54 70 111 112 111 112 111 112
Unit
Breaker Size A 20 25 32 16 32 16 40 16
Breaker Size A 20 25 32 16 32 16 40 16
Diameter [Gas/Liquid] mm 15.88 / 9.52
Ext.
Diameter [Gas/Liquid] mm 15.88 / 9.52
Piping Ext.
Max. Length/Height m 30 / 30 50 / 30 75 / 30
Piping
Max. Length/Height m 30 / 30 50 / 30 75 / 30
Cooling *2 °C -15 ~ 52 -5 (-15) ~ 52
Guaranteed Operating
Cooling *2 °C -15 ~ 52 -5 (-15) ~ 52
Range [Outdoor] Guaranteed Operating
Heating °C -15 ~ 24 -20 ~ 21
Range [Outdoor]
Heating °C -15 ~ 24 -20 ~ 21
*1 M
EPS compliant at part load. (Rating Conditons)
*2 With the optional air protection guide, the operation at -15°C outdoor temperature is possible. Cooling: Indoor 27°C, D.B./19°C, W.B.
*3 Sound pressure level measured in anechoic room at 1m. Outdoor 35°C, D.B./24°C, W.B. *1 MEPS compliant at part load. (Rating Conditons)
Heating: Indoor 20°C, D.B./15°C, W.B. *2 With the optional air protection guide, the operation at -15°C outdoor temperature is possible. Cooling: Indoor 27°C, D.B./19°C, W.B.
Outdoor 7°C, D.B./6°C, W.B. *3 Sound pressure level measured in anechoic room at 1m. Outdoor 35°C, D.B./24°C, W.B.
Heating: Indoor 20°C, D.B./15°C, W.B.
Outdoor 7°C, D.B./6°C, W.B.
26 27You can also read
