MOSO Bamboo product catalogue
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
MOSO®
Bamboo
product
catalogue
Sheryl Leysner
Peter Tijhuis
Viguier
Rob Turner Studios Daniel Osso
MOSO® Bamboo Products
Bamboo Bamboo Bamboo
X-treme® Decking 7 X-treme® Cladding 8 X-treme® Fencing 10
MOSO®
Bamboo
Outdoor
Bamboo Bamboo Bamboo
X-treme® X-treme® Beams 11 N-finity Cladding 13
accessories 9
Bamboo
N-finity
accessories 14
Bamboo Bamboo Bamboo
Elite 17 Elite Premium 18 UltraDensity® 19
MOSO®
Bamboo
Flooring
Bamboo
Bamboo Bamboo Bamboo Industriale
Flooring Supreme 23 Industriale 24 Premium 25
accessories 29
Floor heating /
cooling 31
Recommended
glue 32
Flooring
warranty 33
www.moso-bamboo.com/product-catalogue
Purebamboo 27 Topbamboo 28
Bamboo Bamboo
Solid Panel 35 Solid Beam 37
MOSO®
Bamboo
Panel,
Beam &
Veneer
Bamboo Bamboo
1-ply Panel 39 Veneer 40 Flexbamboo 41
Customised
Solutions 43
Apart from the standard
MOSO® product range, MOSO®
can produce and supply 2021© MOSO® International BV
Bamboo custom made products. To the best of the knowledge of
MOSO® International BV the
information contained in this
Unlimited
document is in accordance with the
facts and is provided on the basis
that MOSO® International BV and/or
any of its affiliates, officers,
employees or advisers are not liable
for any loss or damage whatsoever
in respect of the accuracy or
completeness of such information or
the result of having acted upon it.
www.moso-bamboo.com/production
From bamboo plant to product
stem to strip
Moso bamboo is one of the fastest growing plants on earth.
The bamboo stems grow from an underground root system
and after 4-5 years a stem can be harvested, while the others
continue to grow. This means the bamboo can be used without
destroying the forest. After harvesting, the Moso bamboo
stems are split and the outer and inner skins are removed.
The untreated strips have a light yellow colour (natural),
but can be steamed for a light brown colour (caramel).
strip to MOSO® product
After treating and drying, the strips are ready to be
connected in several ways to make the final product:
Plain Pressed Side Pressed Flexible High Density®
Strips are placed Strips are placed Strips are connected to Strips are compressed and
horizontally and glued vertically and glued a flexible latex backing. glued under high pressure,
together to create a together to create a The latex backing makes creating an elegant random
wide line pattern with narrow line pattern it very comfortable to line pattern. The result is
the characteristic with the bamboo walk on and offers a material that is even
bamboo nodes nodes visible in a excellent sound harder than the best
clearly visible. subtle way. absorption tropical hardwood species.
characteristics.
extra hard
In this catalogue High
Density® is indicated
4
by a hammer.
www.moso-bamboo.com/certifications
Explanation of technical terms and icons
edges DoP
declaration of performance
According to standard EN 17009 requirements are
MOSO® floor boards are EN 17009
defined related to safety, health, quality and
environmental impact of bamboo flooring.
available with various kinds of MOSO® bamboo floors meet these requirements.
edges that each provide a fire classification
According to EN 13501-1 the fire safety of flooring
different look: square edge products can be classified ranging from A1fl
for a closed, flat surface, (non combustible) to Ffl (highly combustible).
All MOSO® floors were tested for fire safety,
macro bevel for a clearly providing a satisfactory result ranging from Bfl to Cfl .
visible V-groove and micro or floor heating / cooling
Under specific conditions several MOSO® floors are
nano bevel for a subtlety suitable for installation on floor heating / cooling
systems. For details, please refer to the “floor heating /
visible V-groove. cooling” section in this catalogue.
intergrated click system
Square Edge (SE) For quick and easy installation without the use of glue.
carbon footprint
Nano Bevel (NB) MOSO® has conducted an LCA and carbon footprint
study together with Delft University of Technology
(TU Delft) and INBAR. The report, available at
moso-bamboo.com/lca, concludes that all assessed
EPD MOSO® products (all solid bamboo flooring, decking,
Micro Bevel (MIB) beams, panels and veneer) are CO2 negative over the
EN15804 full life cycle (“cradle till grave”).
The environmental impact of MOSO® products,
excluding carbon sequestration effect, was also
published in an official Environmental Product
Macro Bevel (MAB) Declaration (EPD) following EN 15804
(see also moso-bamboo.com/epd).
indoor emissions
For a healthy indoor environment it is important that
products used indoors have very low emissions and
comply with the official European E1 norm (EN 717-1).
finishes All MOSO® products meet this standard, while several
MOSO® products even comply with E0, the strictest
(unofficial) emission class available, commonly used to
To protect your MOSO® indicate that the product has a very low or no
detectable emission (formaldehyde emissions
MOSO®
Bamboo Outdoor
X-treme® Collection
With Bamboo X-treme®, MOSO® has developed a
truly ecological and durable alternative for
increasingly scarce tropical hardwood.
MOSO® uses a unique process to enhance the
hardness, dimensional stability, fire resistance
and durability to a level superior to the best
tropical hardwood species. MOSO® Bamboo
X-treme® can be used for decking, cladding,
fencing and outdoor furniture.
bamboo
Decking x-treme® decking
bamboo x-treme® cladding
Cladding
Accessories
bamboo x-treme® accessories
bamboo
Fencing x-treme® fencing
bamboo
Beams x-treme® beams
6
product datasheet www.moso-bamboo.com/x-treme/decking
MOSO® Bamboo X-treme® Outdoor Decking
MOSO® Bamboo X-treme® Decking is a solid, Thermo-Density® board, made from
compressed bamboo strips. A special, unique heat-treatment process at 200°C provides
MOSO® Bamboo X-treme® with the highest durability class possible in the appropriate EU
norms (see technical characteristics below) and the compression increases the hardness and
stability. A unique feature of MOSO® Bamboo X-treme® is the end-match system: this can only
be done with very stable materials and enables the connection of an unlimited number of
boards lengthways. The special symmetrical shape of the sides allows the possibility to
choose either the grooved or the flat surface, and allows for quick installation with MOSO®
Fasteners. Like any tropical hardwood species, when exposed to outdoor conditions, MOSO®
Bamboo X-treme® will turn grey over time creating a very natural look.
Standard Groove / Flat Curved V-Groove /
Standard Groove / Flat
(reversible) Curved V-Groove / RoughRough
SandedSanded
(reversible) (reversible) (reversible) End-matched High Density®
*) Ends of the boards are protected with Sikkens Kodrin WV 457 sealer.
Oiled Woca* Unfinished Surface Edge groove End-matched Length edges End edges Dimensions (mm)
BO-DTHT171G BO-DTHT170G Standard Groove/Flat Yes Yes R3 2 mm x 45° 1850x137x20
BO-DTHT171 BO-DTHT162 Standard Groove/Flat No - endprofile Yes R3 2 mm x 45° 1850x137x20
BO-DTHT181G Standard Groove/Flat Yes Yes R3 2 mm x 45° 1850x137x18
BO-DTHT371 BO-DTHT370 Standard Groove/Flat No Yes R3 2 mm x 45° 1850x137x30
BO-DTHT191G BO-DTHT190G Standard Groove/Flat Yes Yes R3 2 mm x 45° 1850x155x20
BO-DTHT191G-C Curved Yes Yes R3 2 mm x 45° 1850x155x20
BO-DTHT191GV-R V-Groove/Brushed Yes Yes R3 2 mm x 45° 1850x155x20
BO-DTHT211G BO-DTHT210G Standard Groove/Flat Yes Yes R3 2 mm x 45° 1850x178x20
installation summary technical characteristics and certifications
• Install suitable, fixed, stable and durable sub frame joists. • Density: +/- 1150 kg/m3
MOSO recommends the use of MOSO® Bamboo X-treme® Sub frame joists. • Dimensional stability: length: + 0.1 %; width + 0.9% (24 hours in water 20°C)
• Determine which side of the board will be used: the grooved or flat surface. • Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
• Fix the boards on the sub frame using fasteners (to be inserted in the grooves of the board) • Reaction to fire: Class Bfl-s1 (EN 13501-1)
or alternatively with screws (through the surface). • Flame spread index: Class A (ASTM E84)
• Use a 1-2% slope and ensure good ventilation. • Slip resistance: PTV 37 (Dry), PTV 29 (Wet), PTV 53 (Rough sanded version, Dry), PTV 42
The slope is not necessary for the curved boards. (Rough sanded version, Wet) (Pendulum friction test – CEN/TS 16165 Annex C –
• After installation: make sure proper cleaning and maintenance is done, CEN/TS 15676) / R 10, R 11 (Rough sanded version) (Shod ramp test - CEN/TS 16165 Annex B -
according to the chosen finish. DIN 51130) / Class C (Barefoot ramp test – CEN/TS 16165 Annex A – DIN 51097)
• When not applying outdoor oil regularly, the deck will acquire a grey • Thermal emittance: 0.81 (ASTM C1371) 1)
colour tone and the typical bamboo wood grain structure will become • Solar Reflectance (SR): 0.32 (ASTM C1549) 1)
less visible. • Solar Reflectance Index (SRI): Low 27, Medium 30, High 33 (ASTM E1980) 1)
• Bamboo X-treme® is available pre-oiled or unfinished. In order to maintain the rich brown • Modulus of Elasticity: 13565 N/mm2 (mean value - EN 408)
colour an exterior penetrating oil for hardwoods is recommended to be applied 3 to 4 • Bending strength: 54.4 N/mm2 (characteristic value - EN 408)
months after installation. We advise to apply the initial coat 3-4 months after installation. • Biological durability: Class 1 (EN 350 / CEN/TS 15083-2), simulated graveyard test
• For further info: please see the installation/maintenance instructions. / Class 1 (EN 350 / CEN/TS 15083-1)
• Store in a cool and dry place away from direct sunlight, and protected from weather • Effectiveness against Blue Stain: Class 0 (EN 152)
influences, dirt and dust. • Use Class: Class 4 (EN 335)
• Full version available at www.moso-bamboo.com/x-treme/decking • CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd)
• FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), EQ 2, SS 7
v2009: MR 6, MR 7 (FSC®), IEQ 4.3, IEQ 4.4
• Contribution BREEAM: MAT 1, MAT 3 (FSC®), MAT 5 (HD)
EPD • Guarantee: 25 years
1)
Tested on 3 years weathered MOSO® Bamboo X-treme®.
Class A
ASTM E84
EN15804
EN-202104
Class 1 Class 4
WARRANTY EN350 EN335 7
product datasheet www.moso-bamboo.com/x-treme/cladding
MOSO® Bamboo X-treme® Outdoor Cladding
MOSO® Bamboo X-treme® Cladding is a solid, Thermo-Density® exterior board, made from
compressed bamboo strips. A special, unique heat-treatment process at 200°C provides
MOSO® Bamboo X-treme® with the highest durability class possible in the appropriate EU norms,
increases the stability and density, and consequently the hardness. Furthermore, contrary to
other wood products, this material achieves fire resistance Class B-s1-d0 (EN 13501-1) without
impregnation with expensive and eco-damaging fire retardants. Bamboo X-treme® Cladding is
available in 3 shapes: a rebated profile for installation with MOSO® Fasteners (18 mm) and
screws, a closed profile for 'invisible' screw installation and a trapezium profile for installation
with screws. Like any tropical hardwood species, when exposed to outdoor conditions, MOSO®
Bamboo X-treme® will turn grey over time creating a very natural look.
Rebated profile
Rebated profile Trapezium
Trapezium
profile
profile Closed profile
Closed profile
High Density®
*) Effective width without gap between the boards, recommended gap 6 mm.
Product Code Shape Finish Surface Length End-matched End edges Effective width Dimensions
edges (mm)* (mm)
BO-DTHT500G Rebated profile Unfinished Flat R3 Yes 2 mm x 45° 128 1850x137x18
BO-DTHT510 Trapezium profile Unfinished Flat R3 Yes 2 mm x 45° 132 1850x137x18
BO-DTHT530 Closed profile Unfinished Flat R1 Yes 2 mm x 45° 124.5 1850x137x18
BO-DTHT505G Rebated profile Unfinished Flat R3 Yes 2 mm x 45° 63 1850x75x18
BO-DTHT515 Trapezium profile Unfinished Flat R3 Yes 2 mm x 45° 70 1850x75x18
BO-DTHT525 Trapezium profile Unfinished Flat R1 No 1.5 mm x 45° 70 1850x75x12
installation technical characteristics and certifications
• MOSO guarantees the bamboo material and the mounting materials (fastener/screw) it • Density: +/- 1150 kg/m3
supplies but does not guarantee the connection with other materials (such as sub frame • Dimensional stability: length: + 0.1 %; width: + 0.9% (24 hours in water 20°C)
joist/battens). It is the responsibility of the installer to make sure the used screw • Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
matches such materials during the full lifetime of the product. • Reaction to fire: Class B-s1-d0 (EN 13501-1) 1)
• Store in a cool and dry place away from direct sunlight, and protected from weather • Flame spread index: Class A (ASTM E84)
influences, dirt and dust. • Thermal emittance: 0.81 (ASTM C1371) 2)
• Full version available at: www.moso-bamboo.com/x-treme/cladding • Solar Reflectance (SR): 0.32 (ASTM C1549) 2)
• Solar Reflectance Index (SRI): Low 27, Medium 30, High 33 (ASTM E1980) 2)
• Modulus of Elasticity: 13565 N/mm2 (mean value - EN 408)
• Bending strength: 54.4 N/mm2 (characteristic value - EN 408)
• Biological durability: Class 1 (EN 350 / CEN/TS 15083-2), simulated graveyard test /
Class 1 (EN 350 / CEN/TS 15083-1)
• Effectiveness against Blue Stain: Class 0 (EN 152)
• Use Class: Class 4 (EN 335)
• CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd)
• FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), SS 7
v2009: MR 6, MR 7 (FSC®)
• Contribution BREEAM: MAT 1, MAT 3 (FSC®), MAT 5 (HD)
• Guarantee: 25 years
1)
Tested on 18 mm thickness, without gaps between boards, with ventilation space behind boards.
2)
Tested on 3 years weathered MOSO® Bamboo X-treme®.
EPD
Class A
ASTM E84
EN15804 WARRANTY
EN-202104
Class 1 Class 4
8 EN350 EN335
product datasheet www.moso-bamboo.com/x-treme
MOSO® Bamboo X-treme® Outdoor Decking & Cladding
accessories
MOSO® Fasteners
With these fasteners MOSO® Bamboo X-treme® Decking and Cladding can be easily installed. When installed correctly,
there will be 5-6 mm gaps between the boards. The fasteners are supplied with matching stainless steel screws
(square bit). For installation on aluminium sub frame joist (not provided by MOSO®), special screws are available.
Product Code Item Material Colour Dimensions Dimensions
fastener (mm) screw (mm)
CLIP-SCREW-BX08 Fastener Asymmetric with screw (20 mm) Stainless steel A2 (AISI304) Brown 27x22.5x10.8 4.5x30
CLIP-BX08 Fastener Asymmetric without screw (20 mm) Stainless steel A2 (AISI304) Brown 27x22.5x10.8
CLIP-SCREW-BX031 Fastener Symmetric with screw (20 mm) Stainless steel A2 (AISI304) Brown 27x22.5x10.8 4.5x30
CLIP-SCREW-BX301 Fastener Start/End Side/Top with screw (20 mm) Stainless steel A2 (AISI304) Brown 27x17x31 4.5x30
CLIP-SCREW-BX801 Fastener Start/End Top with screw (20 mm) Stainless steel A2 (AISI304) Brown 29x25x11.2 4.5x30
CLIP-SCREW-BX09 Fastener Asymmetric with screw (18 mm) Stainless steel A2 (AISI304) Brown 27x22.5x9.8 4.5x30
CLIP-BX09 Fastener Asymmetric without screw (18 mm) Stainless steel A2 (AISI304) Brown 27x22.5x9.8
CLIP-SCREW-BX041 Fastener Symmetric with screw (18 mm) Stainless steel A2 (AISI304) Brown 27x22.5x9.8 4.5x30
SCREW-09 Screw for aluminium sub frame joist Stainless steel A2 (AISI304) Brown 4.2x20
recommended number of fasteners/m2 CLIP-SCREW-BX08 / BX09
CLIP-BX08 / BX09
CLIP-SCREW-BX031 / BX041
decking* cladding**
137 mm 137 mm
~20 pcs/m² ~14 pcs/m²
155 mm 75 mm *) Based on distance of
~17 pcs/m² ~26 pcs/m² 462.5 mm between the
sub frame joist centres. CLIP-SCREW-BX301 CLIP-SCREW-BX801
178 mm **) Based on distance of
600 mm between the
~14 pcs/m² sub frame joist centres.
MOSO® Bamboo X-treme® Sub frame joist
The MOSO® Bamboo X-treme® Sub frame joists are made of the same material as
the decking boards: Thermo-Density® heat-treated bamboo.
Product Code Material Finish Dimensions (mm)
BO-SB155 Thermo-Density® bamboo Unfinished 2440x60x40
MOSO® Bamboo X-treme® Fascia board
The MOSO® Bamboo X-treme® Fascia board is intended for an elegant finish of the
sides of the decking. It is placed vertically against the sides of the deck to cover
the sub frame joists.
Product Code Material Finish Dimensions (mm)
BO-DTHT162 Thermo-Density® bamboo Unfinished 1850x137x20
BO-DTHT171 Thermo-Density® bamboo Woca 1850x137x20
BO-DTHT184 Thermo-Density® bamboo Woca 1850x137x18
maintenance & cleaning products
Product Code Material
Under the influence of wind, rain, sun and snow the decking will
weather. MOSO® recommends impregnating and maintaining
SEALER-03 Sealer for ends of boards
Sikkens Kodrin WV 456 0.75L the pre-oiled decking with Woca maintenance materials. It is
DISK-01 16” Silicon carbide disk recommended to finish the unfinished decking with Woca
BROOM-01 Silicon carbide broom
Exterior Wood Oil right after installation, but no later than after
the first winter. The silicon carbide broom and machine disk are
CLEANER-WOCA-01 Woca Exterior Wood Cleaner
perfectly suited to clean and smooth the decking surface of
OIL-WOCA-011 Woca Exterior Wood Oil Teak
Bamboo X-treme® and to remove splinters due to the capability
WOCA-APPLICATOR Woca Applicator set for oil
to sand the surface in addition to cleaning it.
EN-202104
9
product datasheet www.moso-bamboo.com/x-treme/fencing
MOSO® Bamboo X-treme® Fencing
MOSO® Bamboo X-treme® fence boards are solid, Thermo-Density® exterior boards, made
from compressed bamboo strips. A special, unique heat-treatment process at 200°C
provides MOSO® Bamboo X-treme® with the highest durability class possible in the
appropriate EU norms and increases the stability and density. The fence boards, equipped
with a tongue/groove connection, are mounted between posts with U-profiles (not provided
by MOSO®). Like any untreated tropical hardwood species, when exposed to outdoor
conditions, MOSO® Bamboo X-treme® will turn grey over time creating a very natural look.
High Density®
Product Code Edge groove Finish Surface Lenght edges End edges End-matched Effective width Dimensions
(mm) (mm)
BO-DTHT301TG Tongue/Groove Woca Flat 2 mm x 45° 1 mm x 45° No 131 1800x137x20
technical characteristics and certifications
• Density: +/- 1150 kg/m3
• Dimensional stability: length: + 0,1 %; width + 0,9% (24 hours in water 20°C)
• Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
• Reaction to fire: Class B-s1-d0 1) (EN 13501-1)
• Flame spread index: Class A (ASTM E84)
• Thermal emittance: 0.81 (ASTM C1371) 2)
• Solar Reflectance (SR): 0.32 (ASTM C1549) 2)
• Solar Reflectance Index (SRI): Low 27, Medium 30, High 33 (ASTM E1980) 2)
• Modulus of Elasticity: 13565 N/mm2 (mean value - EN 408)
• Bending strength: 54.4 N/mm2 (characteristic value - EN 408)
• Biological durability: Class 1 (EN 350 / CEN/TS 15083-2),
simulated graveyard test Class 1 (EN 350 / CEN/TS 15083-1)
• Effectiveness against Blue Stain: Class 0 (EN 152)
• Use Class: Class 4 (EN 335)
• CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd)
• FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), SS 7
v2009: MR 6, MR 7 (FSC®)
• Contribution BREEAM: MAT 1, MAT 3 (FSC®), MAT 5 (HD)
• Guarantee: 25 years
1)
Tested on 18 mm thickness, without gaps between boards, with ventilation space behind boards.
2)
Tested on 3 years weathered MOSO® Bamboo X-treme®.
EPD
Class A
ASTM E84
EN15804 WARRANTY
EN-202104
Class 1 Class 4
10 EN350 EN335product datasheet www.moso-bamboo.com/x-treme/beams
MOSO® Bamboo X-treme® Outdoor Beams
A unique heat-treatment process at 200°C and compression of the bamboo strips to increase
the density make the MOSO® Bamboo X-treme® material extremely durable and stable.
This durability and stability, and the pre-profiled rounded edges, make MOSO® Bamboo
X-treme® Beams ideal for use in outdoor furniture products. The elaborate manufacturing
process provides MOSO® Bamboo X-treme® Outdoor Beams with the highest durability class
possible in the applicable EU norms. As with tropical hardwoods, the colour of the material
changes under the influence of wind, rain, frost and sunshine (UV-light). This results in a typical
weathered natural grey-tone. Regular cleaning and maintenance with a finish/sealer protects
the material against this weather related discolouration.
Solid Beam outdoor
High Density®
BO-DTHT2171-2-01 BO-DTHT2173-2-01
2000 x 80 x 40 mm 2000 x 40 x 40 mm
Other dimensions, bevel and finish can be produced custom made.
Product Code Finish Edges (also on ends) Dimensions (mm)
BO-DTHT2170-2-01 Sikkens Cetol R4 2000x115x40
BO-DTHT2171-2-01 Sikkens Cetol R4 2000x80x40
BO-DTHT2172-2-01 Sikkens Cetol R4 2000x60x40
BO-DTHT2173-2-01 Sikkens Cetol R4 2000x40x40
BO-DTHT2174-2-01 Sikkens Cetol R4 2000x55x40
BO-DTHT2175-2-01 Sikkens Cetol R4 2000x90x40
installation summary technical characteristics and certifications
• To allow natural shrink- and swell behaviour, install beams with a minimum of 4 mm distance. • Density: +/- 1150 kg/m3
• MOSO® Bamboo X-treme® Beams must be mechanically fixed, using screws/bolts. The fixing • Dimensional stability: length: + 0,1 %; width + 0,9% (24 hours in water 20°C)
method depends on the application. • Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
• Use stainless steel A2 screws/bolts. • Reaction to fire: Class B-s1-d0 1) (EN 13501-1)
• For all our standard size beams, except 40x40 mm, we advise a minimum of 2 screws per • Flame spread index: Class A (ASTM E84)
fixing point. 40x40 mm beams can be fixed with 1 screw per fixing point. • Thermal emittance: 0.81 (ASTM C1371) 2)
• Horizontal installation: • Solar Reflectance (SR): 0.32 (ASTM C1549) 2)
• The number of fixing points is depends on the application and applicable load. • Solar Reflectance Index (SRI): Low 27, Medium 30, High 33 (ASTM E1980) 2)
• In general, a 2 meter beam should at least have 3 fixing points (2 on the sides and 1 • Modulus of Elasticity: 13565 N/mm2 (mean value - EN 408)
connection in the middle). • Bending strength: 54.4 N/mm2 (characteristic value - EN 408)
• Vertical installation: • Biological durability: Class 1 (EN 350 / CEN/TS 15083-2),
• End of the beam should be angled (min. 15°) to improve water drainage. simulated graveyard test
• Beams longer than 1 meter have to be fixed in at least 3 points. Class 1 (EN 350 / CEN/TS 15083-1)
• To avoid cracks caused by excessive water uptake, end of the beam must be treated with • Effectiveness against Blue Stain: Class 0 (EN 152)
Sikkens Kodrin WV 457 sealer. • Use Class: Class 4 (EN 335)
• Store in a cool and dry place away from direct sunlight, and protected from weather • CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
influences, dirt and dust. • Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd)
• Full version available at www.moso-bamboo.com/x-treme/beams • FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), SS 7
v2009: MR 6, MR 7 (FSC®)
• Contribution BREEAM: MAT 1, MAT 3 (FSC®), MAT 5 (HD)
• Guarantee: 10 years
1)
Tested on 18 mm thickness, without gaps between boards, with ventilation space behind boards.
2)
Tested on 3 years weathered MOSO® Bamboo X-treme®.
EPD
Class A
ASTM E84
EN15804
EN-202104
Class 1 Class 4
EN350 EN335 11MOSO®
Bamboo Outdoor
N-finity Collection
With the N-finity Collection, MOSO® has
developed a truly ecological and durable
alternative to increasingly scarce tropical
hardwood. By using a special impregnation
process, the material is made suitable for many
exterior applications, such as cladding, shutters
shutters, furniture
and structural and structural beams.
beams.
Bamboo
Bamboo N-finity Cladding
n-finity cladding
Bamboo N-finity Accessories
bamboo n-finity accessories
12product datasheet www.moso-bamboo.com/n-finity
MOSO® Bamboo N-finity Outdoor Cladding
MOSO® Bamboo N-finity Cladding is a solid, laminated bamboo board that is impregnated for
outdoor use. The special impregnation process provides the product the highest durability
class possible following EU norm EN 350 (see technical characteristics below).
MOSO® Bamboo N-finity Cladding is available in two standard lengths, and on request even in
lengths up to 5800 mm. The extraordinary length is achieved by connecting the strips with a
special patented hook connection. MOSO® Bamboo N-finity Cladding is available in 2 shapes: a
rebated profile and a trapezium shape. The former is installed with fasteners and screws and
the latter with screws. Like any untreated tropical hardwood species, when exposed to outdoor
conditions, MOSO® Bamboo N-finity will turn light grey over time creating a very natural look.
Rebated profile Trapezium shape
Side Pressed
Product Code Type Grooved Surface Length edges End edges Head-side Effective width Dimensions
Tongue/Groove (mm) (mm)
BO-IL500G-540 Rebated Yes Flat R3 Square Edge No 128* 5400x140x18
BO-IL500G-240 Rebated Yes Flat R3 Square Edge No 128* 2400x140x18
BO-IL510-540 Trapezium No Flat R3 Square Edge No 137* 5400x140x18
BO-IL510-240 Trapezium No Flat R3 Square Edge No 137* 2400x140x18
* Effective width without distance between the boards, recommanded distance 6 mm. Other profiles and dimensions can be produced custom made.
installation summary
technical characteristics and certifications
• Apply a waterproof membrane against the wall and fix the battens
(at least 20 mm thick, 60 mm wide) against the membrane with screws.
This creates a rigid/flat surface for installation of the cladding boards.
• Density: +/- 700 kg/m3
• Fix the cladding boards, starting with the lowest row of boards.
• Shrink/Swell: 0.14% per 1% change in Moisture Content
• Trapezium version: Use a countersink drill to predrill the screw holes; always use
• Resistance to Indentation - Brinell Hardness: ≥ 4 kg/mm2 (EN 1534)
2 screws on each batten. Install the board and make sure it is placed fully level.
• Reaction to fire: Class D-s2-d0 1) (EN 13501-1)
Make sure the screws used are suitable for the material used as battens.
• REACH: Does not contain SVHC (Substances of Very High Concern) as listed in
Install the second row of boards, using a minimum 6 mm spacing. Continue with
REACH Annex XVII/candidate list
the rest of the rows.
• Biocide Product Regulation: Used impregnation preservatives are listed in
• Rebated version: Use the MOSO® Fastener (CLIP-SCREW-BX09) to fix the boards
approved list of BPR
onto the battens; always use 2 fasteners on each batten. The boards must be
• Modulus of Elasticity: 9721 N/mm2 (SP), 8866 N/mm2 (PP) (EN 408)
placed fully level. Make sure the screws used are suitable for the material used as
• Bending strength: 56.7 N/mm2 (SP), 50.8 N/mm2 (PP) (EN 408)
battens. Continue with the rest of the rows.
• Biological durability: Class 1 (EN 350 / CEN/TS 15083-1)
• Cutting, planing and sanding should be avoided as it removes the anti-fungal protection.
• Effectiveness against surface fungi: Class 0, Strong fungi static (EN ISO 846),
• Bamboo N-finity does not require a finish, unless you want to slow down its natural
impregnation only superficial (2-3 mm)
weathering behavior. The material will turn light grey if you do not apply any finish.
• Use Class: Class 3 (EN 335)
• To finish the material we advise the use of Sikkens Cetol Savannah.
• FSC®: Products available with FSC® certification on request
• Only stainless steel grade A2 or A4 should be used in combination with
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®)
Bamboo N-finity.
v2009: MR 6, MR 7 (FSC®)
• Full version available at www.moso-bamboo.com/n-finity
• Contribution BREEAM: MAT 1, MAT 3 (FSC®)
1)
Tested on 18 and 36 mm thickness, without gaps between boards, with ventilation space behind boards.
EN-202104
Class 1 Class 3
EN350 EN335 13product datasheet www.moso-bamboo.com/n-finity
MOSO® Bamboo N-finity
accessories
MOSO® fasteners and screws
With these fasteners MOSO® Bamboo N-finity Cladding can be easily installed.
When installed correctly there will be 5-6 mm gaps between the boards.
The fasteners are supplied with matching stainless steel screws (square bit).
Product Code Item Material Colour Dimensions Dimensions
(mm) screw (mm)
CLIP-SCREW-BX09 Fastener Asymmetric with screw (18 mm) Stainless steel A2 (AISI304) Brown 27x22.5x9.8 4.5x30
CLIP-BX09 Fastener Asymmetric without screw (18 mm) Stainless steel A2 (AISI304) Brown 27x22.5x9.8
SCREW-09 Screw for aluminium sub frame joist Stainless steel A2 (AISI304) Brown 4.2x20
recommended number of fasteners/
m2 cladding:
137 mm board width: 14 pcs/m²
Based on distance of 600 mm
between the sub frame joist axes.
maintenance products
Under the influence of wind, rain, sun and snow the cladding will weather.
MOSO® recommends to maintain Bamboo N-finity with SIKKENS CetolSavannah.
After cross-cutting we recommend to apply Sikkens Kodrin WV 456 sealer.
Product Code Material
SATURATOR-SIK04 Sikkens Cetol WF 771
SEALER-03 Sealer for ends of boards Sikkens
Kodrin WV 456 0.75L
EN-202104
14MOSO®
Bamboo Flooring
Grand Collection
The Grand Collection was specially
developed for customers who appreciate the
aesthetics of large boards for a spacious
and exclusive look. Thanks to the generous
dimensions of the boards, the installation can
be done relatively fast. The wide choice of
colours and finishes in the Grand Collection
offers a suitable bamboo flooring for
any interior.
Bamboo Elite
bambooelite
bambooelite
Bamboo Elitepremium
Premium
bamboo ultradensity®
Bamboo UltraDensity®
15product datasheet www.moso-bamboo.com/bamboo-elite
MOSO® Bamboo Elite (solid wide board)
MOSO® Bamboo Elite is a floor board that is relatively long and wide (compared to other
MOSO® floors) and is made of three layers of solid bamboo, equipped with a tongue/
Bamboo Elite
groove connection. Purebamboo B
Plain Pressed Side Pressed High Density®
Natural/Caramel
Plain Pressed Natural/Caramel
Side Pressed Natural/Caramel
High Density®
Plain Pressed Side Pressed High Density®
L: Lacquered Bona 85 g/m2, LN: Lacquered Bona Naturale (extra matt) 125 g/m2, O: Pre-oiled Woca Air Dried (has to be re-oiled after installation).
*) Middle layer cross pressed.
Natural Caramel Style Finish Edges Dimensions (mm) Box Content (pcs.) Box Content (m²)
BF-LA350 Plain Pressed* - Square Edge 1960x159x15 8 2.493
BF-LA370 Side Pressed* - Square Edge 1960x159x15 8 2.493
BF-LA301 BF-LA351 Plain Pressed* L Micro Bevel 1960x159x15 8 2.493
BF-LA353 Plain Pressed* O Micro Bevel 1960x159x15 8 2.493
BF-LA321 BF-LA371 Side Pressed* L Micro Bevel 1960x159x15 8 2.493
BF-LA373 Side Pressed* O Micro Bevel 1960x159x15 8 2.493
BF-DT301 BF-DT351 High Density®* LN Micro Bevel 1830x142x13 6 1.559
BF-DT303 BF-DT353 High Density®* O Micro Bevel 1830x142x13 6 1.559
installation summary technical characteristics and certifications
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Density (Toplayer): +/- 700 kg/m3 (SP/PP), +/- 1050 kg/m3 (HD)
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum • Top layer thickness / Wear layer: approx. 5 mm (SP/PP), approx. 3 mm (HD)
allowed moisture content (for example 1.8% for sand cement). • Shrink/Swell bamboo: 0.14% per 1% change in Moisture Content (SP/PP)
• The floor should be fully glued (for glue details see full version of installation • Equilibrium MC: 10% at 20°C and 65% rel. Air Humidity (SP/PP)
instruction) and can also be installed floating (max width 6 m, max length 12 m, using 8% at 20°C and 50% rel. Air Humidity (SP/PP)
expansion gaps). • Resistance to Indentation - Brinell Hardness: ≥ 4 kg/mm2 (SP/PP),
• For floating installation use a PVAC wood adhesive to join the tongue and groove ≥ 9.5 kg/mm2 (HD) (EN 1534)
together. • Reaction to fire: Class Cfl-s1 (EN 13501-1)
• Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives • Formaldehyde emission: Class E0 (< 0.025 mg/m3) 1) Class E1 (< 0.124 mg/m3, EN 717-1)
only can be used, when: • Slip resistance 2): USRV 22 (SP/PP), USRV 26 (HD) (CEN/TS 15676) / R 10 (DIN 51130)
• Shear strength Ts > 1.4 N/mm2 • Thermal conductivity: 0.17 W/mK (SP/PP), 0.19 W/mK (HD) (EN 12667)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Thermal resistance: 0.0882 m2K/W (SP/PP), 0.0784 m2K/W (HD) (EN 12667)
• Shear elongation y >=0.5 • Use Class: Class 1 (EN 335)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
Please ask your glue supplier for more information. • Environmental Product Declaration - EPD (EN 15804) (www.moso-bamboo.com/epd)
• This floor type can be installed – under certain conditions – on floor heating / cooling. • FSC®: Products available with FSC® certification on request.
www.moso-bamboo.com/floorheating-cooling • Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), EQ2
• After installation: make sure proper cleaning and maintenance is done, fitting to the v2009: MR 6, MR 7 (FSC®), IEQ 4.3
chosen finish. For oiled finish: the floor has to be re-oiled after installation. Polish the • Contribution BREEAM: HEA 2, MAT 1, MAT 3 (FSC®), MAT 5 (HD)
oil with a red pad or patina disc (possibly afterwards with white pad). • Guarantee: 30 years
• Full version available at www.moso-bamboo.com/bamboo-elite
E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
1)
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
2)
Only for lacquered versions.
EN-202104
DoP EPD
EN 17009 EN15804 16product datasheet www.moso-bamboo.com/bamboo-elite
MOSO® Bamboo Elite Premium (solid wide board)
MOSO® Bamboo Elite Premium is a floor board that is even longer and wider compared to
Bamboo Elite. The board is made of three layers of solid bamboo, the middle layer is pressed
in cross direction to maximise the stability. The boards are equipped with a click system for
easy installation.
Bamboo Elite Premium click
Side Pressed Side Pressed Natural High Density® High Density®
Caramel White Side Pressed
Caramel High Density®
Natural White
L: Lacquered (extra matt) 80 g/m2, SL: Stained-lacquered (extra matt) 80 g/m2, O: Pre-oiled Woca Air Dried (has to be re-oiled after installation),
*) Middle layer cross pressed, **) “Nano” bevel, approx. 0,1 mm (barely visible).
Natural Caramel Style Finish Colour Edges Dimensions Box Content Box Content
(mm) (pcs.) (m²)
BL-EL371 Side Pressed* L Transparent Nano Bevel** 1960x190x15 8 2,979
BF-EL321-02 Side Pressed* SL White Nano Bevel** 1960x190x15 8 2,979
BF-EL373 Side Pressed* O Transparent Nano Bevel** 1960x190x15 8 2,979
BF-EL250 High Density®* L Transparent Nano Bevel** 1850x190x15 6 2,109
BF-EL200-02 High Density®* SL White Nano Bevel** 1850x190x15 6 2,109
installation summary technical characteristics and certifications
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Density (Toplayer): +/- 700 kg/m3 (SP), +/- 1050 kg/m3 (HD)
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum • Top layer thickness / Wear layer: approx. 4 mm
allowed moisture content (for example 1.8% for sand cement). • Shrink/Swell bamboo: 0.14% per 1% change in Moisture Content (SP)
• The floor should be installed floating (max width 7 m, max length 12 m, using • Equilibrium MC: 10% at 20°C and 65% rel. Air Humidity (SP)
expansion gaps) but can also be fully glued to the subfloor. 8% at 20°C and 50% rel. Air Humidity (SP)
• This floor type can be installed – under certain conditions – on floor heating / cooling. • Resistance to Indentation - Brinell Hardness: ≥ 4 kg/mm2 (SP),
www.moso-bamboo.com/floorheating-cooling ≥ 9.5 kg/mm2 (HD) (EN 1534)
• After installation: make sure proper cleaning and maintenance is done, fitting to the • Reaction to fire: Class Cfl-s1 (SP), Class Bfl-s1 (HD) (EN 13501-1)
chosen finish. For oiled finish: the floor has to be re-oiled after installation. Polish the • Formaldehyde emission: Class E0 (< 0.025 mg/m3) 1) Class E1 (< 0.124 mg/m3, EN 717-1)
oil with a red pad or patina disc (possibly afterwards with white pad). • Thermal conductivity: 0.17 W/mK (SP), 0.19 W/mK (HD) (EN 12667)
• Full version available at www.moso-bamboo.com/bamboo-elite • Thermal resistance: 0.0882 m2K/W (SP), 0.0725 m2K/W (HD) (EN 12667)
• Use Class: Class 1 (EN 335)
• CO2 neutral: LCA report TU Delft (ISO 14040/44) (moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (moso-bamboo.com/epd)
• FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), EQ2
v2009: MR 6, MR 7 (FSC®), IEQ 4.3
• Contribution BREEAM: HEA 2, MAT 1, MAT 3 (FSC®), MAT 5 (HD)
• Guarantee: 30 years
E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
1)
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
DoP EPD
EN 17009 EN15804
EN-202104
17product datasheet www.moso-bamboo.com/ultradensity
MOSO® Bamboo UltraDensity® Flooring
(for semi-outdoor high traffic areas)
MOSO® Bamboo UltraDensity® is a solid bamboo flooring board made from compressed bamboo
strips with an Ultra-High Density®. Thanks to its unique production method the material is
extremely stable, hard and durable and therefore suitable for the toughest conditions: in very high
traffic areas and even in semi-outdoor areas (protected from direct rain or sunshine). The boards
are available unfinished, and have to be finished on site. The boards come with tongue and
groove and a bevel on all 4 sides. This flooring type has to be fully glued down or installed
screwed down on MOSO® Bamboo X-treme® sub joists or alternative joists.
UltraDensity®
Caramel Style Finish Surface Edges Dimensions (mm)
BF-DS1060 UltraDensity® - Rough sanded Macro Bevel 1900x160x32
BF-DS2060 UltraDensity® - Rough sanded Macro Bevel 1900x160x20
BF-DS2061 UltraDensity® - Smooth Micro Bevel 1900x160x18
installation summary technical characteristics and certifications
Screw down installation: • Density (product): +/- 1150 kg/m3
• Install a PE (Polyethylene) film as moisture barrier. • Composition: 93% bamboo strips (lignin/cellulose) and 7% glue
• Install a suitable, fixed, stable and durable sub frame, preferably using Bamboo (outdoor resistance).
X-treme® sub beams. Distance between the beams: see table ‘field of use’, • Top layer thickness / Wear layer: approx. 7 mm for the 20 mm boards /
available in booklet. 11 mm for the 32 mm boards
• Always make sure the end of the board is supported by a joist. • Dimensional stability: Results conform to French standard
• Maximum length/width of the floor 100 m / 15 m. NF B 54008 (ISO 24339).
• Fix the boards on the sub frame screwing into the tongue of the board at a 45° angle. • Resistance to Indentation – Brinell Hardness: ≥ 9.5 kg/mm² (EN 1534)
Always predrill before screwing. • Reaction to fire 1): Class Bfl-s1 (EN 13501-1)
• Slip resistance 1): USRV 118 (EN 13036-4), R 10 (CEN/TS 16165 Annex B - DIN 51130)
Glue down installation: • Formaldehyde emission: Class E1 (< 0.124 mg/m3, EN 717-1), Class E0 (< 0.025 mg/m3) 2)
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Emission of VOC: A+ (ISO 16000-9)
• Check subfloor: it should be flat/clean/stable and should not exceed the maximum • Modulus of Elasticity: 12610 N/mm² (EN 408)
allowed moisture content (for example 1.8% for sand cement). • Bending strength: 95.5 N/mm² (EN 310)
• The floor should be fully glued. • Biological durability: Class 2 (EN 350 / CEN/TS 15083-1)
• MOSO® Bamboo UltraDensity® itself can be installed glued down without expansion • Use class: Class 3.1 (EN 335 / EN 460)
gap/joint, but with minimum 10 mm distance from the wall. When the building, where • UPEC classification according to French standard: Class U4P4E2C2 1)
the floor will be installed, requires expansion gaps (for example in concrete subfloors), • CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
these expansion gaps needs to be taken over and also be made in the MOSO® Bamboo • Environmental Product Declaration - EPD (EN 15804) (wwww.moso-bamboo.com/epd)
UltraDensity® floor. • Contribution LEED BD+C - v4: MR 1, MR 2, EQ2 v2009: MR 6, IEQ 4.4
• Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives • Contribution BREEAM: HEA 2, MAT 1, MAT 5
only can be used, when: • Guarantee: 30 years
• Shear strength Ts > 1.4 N/mm2
(3 days balanced at 23 degrees Celsius/50% Air Humidity) Only when finished with Woca Diamond Oil Active (WocaNo1) oil.
1)
E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
2)
• Shear elongation y >=0.5
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
(3 days balanced at 23 degrees Celsius/50% Air Humidity)
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
• Please ask your glue supplier for more information.
• This floor type can be installed – under certain conditions – on floor heating / cooling.
• After cleaning and drying, apply an appropriate finish (Woca Diamond Oil Active
(Woca No1) is advised for heavy traffic areas).
• After installation: make sure proper cleaning and maintenance is done, according to
the chosen finish.
• Full version available at www.moso-bamboo.com/ultradensity
EN350
EN-202104
DoP Class 2 EPD
EN 17009 EN350 EN15804 18product datasheet www.moso-bamboo.com/ultradensity
MOSO® Bamboo UltraDensity® Stair Panels
The MOSO® Bamboo UltraDensity® Stair Panel is a solid bamboo board, made from
compressed bamboo strips. Its unique production method makes the panels very dense,
hard and stable. The product has been certified and the mechanical properties allow for
structural applications such as stairs. Bamboo UltraDensity® Stair Panel is suitable for semi-
outdoor covered areas and indoor applications (Use Class 3 / EN 335).
Stair Panel Density Tatamat
UltraDensity®
Caramel Style Finish Edge Thickness (mm) Dimensions (mm)
BP-DS1080 UltraDensity® - Square Edge 38 2440x320
- The look may be different compared to High Density® flooring, please check before ordering if the products can be combined.
- Because of the High Density® of the UltraDensity® products the surface is very closed.
technical characteristics and certifications
• Density: +/- 1150 kg/m3
• Dimensional stability: Results conform to French standard
NF B 54008 (ISO 24339)
• Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
• Reaction to fire: Class Bfl-s1 (EN 13501-1)
• Formaldehyde emission: < 0.124 mg/m3, EN 717-1)
• VOC emission: A+ (ISO 16000-9)
• Modulus of Elasticity: 12610 N/mm2 (EN 408)
• Bending strength: 95.5 N/mm2 (EN 310)
• Biological durability: Class 2 (EN 350 / CEN/TS 15083-1)
• Use Class: Class 3.1 (EN 335 / EN 460)
• CO2 neutral: LCA report TU Delft (ISO 14040/44) (moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (moso-bamboo.com/epd)
• Contribution LEED BD+C - v4: MR 1, MR 2, EQ2 v2009: MR 6, IEQ 4.4
• Contribution BREEAM: HEA 2, MAT 1, MAT 5
• Guarantee: 30 years
EN-202104
Class 2 EPD
19 EN350 EN350 EN15804Bamboo
UltraDensity®
the solution for
heavy duty
natural flooring
D.S. Blay
SNCF
Shai Gil
AREP
Bordeaux Saint Jean train station France
SNCF – Railway Station Paris – Gare du Nord
Paris, France
Weinstein-Vaadia Architects
Doron Neva
David Ducastel (Philéas Fotos)
High School Shevach Mofet
Tel Aviv, IsraelMOSO®
Bamboo Flooring
Eternal Collection
The Eternal Collection offers the strongest and
most robust floors in the MOSO® assortment.
Especially for those looking for flooring that will
last a lifetime, flooring from the Eternal
Collection will be the best choice. These floors
are so strong that they can be installed in the
most demanding projects, such as public
buildings, offices and restaurants, but are also
suitable for residential applications.
Bamboo Supreme
bamboosupreme
bambooindustriale
Bamboo Industriale
bambooforest
Bamboo Industriale Premium
21product datasheet www.moso-bamboo.com/bamboo-supreme
MOSO® Bamboo Supreme (2-ply flooring)
MOSO® Bamboo Supreme is made from two layers of bamboo, with a 4 mm toplayer and a
cross pressed bamboo backing. The total thickness is 10 mm which is relatively thin compared
to other wood floors. However, as with any wood species the basic rule is: the thicker, the less
stable the wood (shrink/swell). The 10 mm thickness and 4 mm toplayer is an ideal
compromise between durability and stability and therefore offers a perfect solution for heavy
Bamboo Supreme Bamboo Plex Finebamboo
duty conditions, like installation on floor heating and/or installation in heavy traffic areas.
Plain Pressed Side Pressed High Density®
Natural/Caramel
Plain Pressed Natural/Caramel
Side Pressed Natural/Caramel
High Density®
Plain Pressed Side Pressed High Density®
L: Lacquered Bona 125 g/m2, LN: Lacquered Bona Naturale (extra matt) 125 g/m2, O: Pre-oiled Woca Air Dried (to be re-oiled after installation).
*) "Nano” bevel, approx. 0,1 mm (barely visible).
Natural Caramel Style Finish Edges Dimensions (mm) Box Content (pcs.) Box Content (m²)
BF-LA451 Plain Pressed - Square Edge 970x95x10 36 3.317
BF-LA471 Side Pressed - Square Edge 970x95x10 36 3.317
BF-LA403 BF-LA453 Plain Pressed O Square Edge 970x95x10 36 3.317
BF-LA423 BF-LA473 Side Pressed O Square Edge 970x95x10 36 3.317
BF-DT403 BF-DT453 High Density® O Nano Bevel* 920x96x10 24 2.120
BF-LA409 BF-LA459 Plain Pressed L Square Edge 970x95x10 36 3.317
BF-LA429 BF-LA479 Side Pressed L Square Edge 970x95x10 36 3.317
BF-DT409 BF-DT459 High Density® LN Nano Bevel* 920x96x10 24 2.120
installation summary technical characteristics and certifications
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Density (Toplayer): +/- 700 kg/m3 (SP/PP), +/- 1050 kg/m3 (HD)
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum • Top layer thickness / Wear layer: approx. 4 mm
allowed moisture content (for example 1.8% for sand cement). • Shrink/Swell bamboo: 0.14% per 1% change in Moisture Content (SP/PP)
• The floor should be fully glued. • Equilibrium MC: 10% at 20°C and 65% rel. Air Humidity (SP/PP)
• Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives 8% at 20°C and 50% rel. Air Humidity (SP/PP)
only can be used, when: • Resistance to Indentation - Brinell Hardness: ≥ 4 kg/mm2 (SP/PP),
• Shear strength Ts > 1.4 N/mm2 ≥ 9.5 kg/mm2 (HD) (EN 1534)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Wear resistance 2): ≥ 5000 Revolutions (WR2) (SP/PP),
• Shear elongation y >=0.5 ≥ 7000 Revolutions (WR3) (HD) (EN 13696)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Reaction to fire: Class Cfl-s1 (EN 13501-1)
Please ask your glue supplier for more information. • Formaldehyde emission: Class E1 (< 0.124 mg/m3, EN 717-1),
• This floor type can be installed – under certain conditions – on floor heating / cooling. Class E0 (< 0.025 mg/m3) 1) (HD)
www.moso-bamboo.com/floorheating-cooling • Slip resistance 2): USRV 22 (SP/PP), USRV 26 (HD) (CEN/TS 15676) / R 10 (DIN 51130)
• After installation: make sure proper cleaning and maintenance is done, fitting to the • Thermal conductivity: 0.17 W/mK (SP/PP), 0,21 W/mK (HD) (EN 12667)
chosen finish. For oiled finish: the floor has to be re-oiled after installation. Polish the • Thermal resistance: 0.0588 m2K/W (SP/PP), 0.0471 m2K/W (HD) (EN 12667)
oil with a red pad or patina disc (possibly afterwards with white pad). • Use Class: Class 1 (EN 335)
• Full version available at www.moso-bamboo.com/bamboo-supreme • Critical radiant flux: Class 1 (SP/PP), Class 1 (HD) (ASTM E 648)
• CO2 neutral: LCA report TU Delft (ISO 14040/44) (moso-bamboo.com/lca)
• Environmental Product Declaration - EPD (EN 15804) (moso-bamboo.com/epd)
• FSC®: Products available with FSC® certification on request.
• Contribution LEED BD+C - v4: MR 1, MR 2, MR 3 (FSC®), EQ2
v2009: MR 6, MR 7 (FSC®), IEQ 4.3
• Contribution BREEAM: HEA 2, MAT 1, MAT 3 (FSC®), MAT 5 (HD)
• Guarantee: 30 years
1)
E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
2)
Only for lacquered versions.
EN-202104
DoP EPD
EN 17009 EN15804 22product datasheet www.moso-bamboo.com/bamboo-industriale
MOSO® Bamboo Industriale (industrial look)
MOSO® Bamboo Industriale consists of small floor ‘boards’ made from short solid bamboo
strips, creating the specific industrial look. The ‘boards’ are in fact blocks of strips bundled
together with tape. The floor installer glues them on the subfloor, sands off the tape, fills the
gaps and finishes the surface. Being made of such small strips, the floor is very stable – making
it the perfect solution for application on floor heating. This floor has the thickest wear layer of
all MOSO® floors:
Bamboo up to 15 mm!
Industriale
Side Pressed Side Pressed High Density® High Density®
Natural Caramel Natural
Side Pressed High Density®
Caramel
Natural Caramel Style Finish Edges Dimensions (mm) Box Content (pcs.) Box Content (m²)
BF-PR300 BF-PR350 Side Pressed - Square Edge 280x140x10 96 3.763
BF-PR150 Side Pressed - Square Edge 280x140x15 60 2.352
BF-PR1000 BF-PR1050 High Density® - Square Edge 300x200x10 32 1.920
installation summary technical characteristics and certifications
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Density (Product): +/- 700 kg/m3 (SP), +/- 1050 kg/m3 (HD)
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum • Top layer thickness / Wear layer: approx. 10 mm
allowed moisture content (for example 1.8% for sand cement). • Shrink/Swell bamboo: 0.14% per 1% change in Moisture Content (SP)
• The floor should be fully glued. • Equilibrium MC: 10% at 20°C and 65% rel. Air Humidity (SP)
• Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives 8% at 20°C and 50% rel. Air Humidity (SP)
only can be used, when: • Resistance to Indentation - Brinell Hardness: ≥ 4 kg/mm2 (SP),
• Shear strength Ts > 1.4 N/mm2 ≥ 9.5 kg/mm2 (HD) (EN 1534)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Reaction to fire: Class Cfl-s1 (SP), Class Bfl-s1 (HD) (EN 13501-1)
• Shear elongation y >=0.5 • Formaldehyde emission: Class E0 (< 0.025 mg/m3) 1) Class E1 (< 0.124 mg/m3, EN 717-1)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Thermal conductivity: 0.17 W/mK (SP), 0.26 W/mK (HD) (EN 12667)
Please ask your glue supplier for more information. • Thermal resistance: 0.0588 m2K/W (SP), 0.0392 m2K/W (HD) (EN 12667)
• After the glue has hardened, the floor can be sanded, filled (with a mixture of • Use Class: Class 1 (EN 335)
sanding dust and floor filler) and finished (with floor lacquer or oil). • Critical radiant flux: Class 1 (SP), Class 1 (HD) (ASTM E 648)
• This floor type can be installed – under certain conditions – on floor heating / cooling. • CO2 neutral: LCA report TU Delft (ISO 14040/44) (moso-bamboo.com/lca)
www.moso-bamboo.com/floorheating-cooling • Environmental Product Declaration - EPD (EN 15804) (moso-bamboo.com/epd)
• After installation: make sure proper cleaning and maintenance is done, fitting to the • Contribution LEED BD+C - v4: MR 1, MR 2, EQ2
chosen finish. For oiled finish: the floor has to be oiled after installation. Polish the oil v2009: MR 6, IEQ 4.3
with a red pad or patina disc (possibly afterwards with white pad). • Contribution BREEAM: HEA 2, MAT 1, MAT 5 (HD)
• Attention: the width of the individual bamboo strips can vary between approx. • Guarantee: 30 years
4 and 8mm (High Density® 13-14mm). MOSO® guarantees that within 1 delivery the
variation in strip width is limited. E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
1)
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
• Full version available at www.moso-bamboo.com/bamboo-industriale
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
EN-202104
DoP EPD
23 EN 17009 EN15804product datasheet www.moso-bamboo.com/bamboo-industriale
MOSO® Bamboo Industriale Premium (industrial look)
MOSO® Bamboo Industriale floor boards consist of short, solid High Density® bamboo strips,
creating the specific 'Industriale' look. The strips are connected with a wooden strip at the
back of the board. Additionally, the boards are profiled with a tongue and groove for
convenient
Bambooinstallation.
IndustrialeBeing made of such small strips of High Density®
Premium Bamboo bamboo, the floor is
Industriale
very stable and hard – making it the perfect solution for installation on floor heating and ideal
for commercial applications.
High Density®
High Density® High Density®
Natural Caramel
Natural Caramel Style Finish Edges Dimensions (mm) Box Content (pcs.) Box Content (m²)
BF-PR2000-TG BF-PR2050-TG High Density® - Square Edge 485x245x10 20 2.377
installation summary technical characteristics and certifications
• Check room climate conditions (room temp. 18-21°C, air humidity 40-65%). • Density (Product): +/- 1050 kg/m3
• Check subfloor: this should be flat/clean/stable and should not exceed the maximum • Top layer thickness / Wear layer: approx. 4 mm
allowed moisture content (for example 1.8% for sand cement). • Resistance to Indentation - Brinell Hardness: ≥ 9.5 kg/mm2 (EN 1534)
• The floor should be fully glued. • Reaction to fire: Class Bfl-s1 (EN 13501-1)
• Elastic adhesive systems like 1-component Polyurethane or silan type of adhesives • Formaldehyde emission: Class E0 (< 0.025 mg/m3) 1) Class E1 (< 0.124 mg/m3, EN 717-1)
only can be used, when: • Thermal conductivity: 0.26 W/mK (EN 12667)
• Shear strength Ts > 1.4 N/mm2 • Thermal resistance: 0.0392 m2K/W (EN 12667)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • Use Class: Class 1 (EN 335)
• Shear elongation y >=0.5 • Critical radiant flux: Class 1 (ASTM E 648)
(3 days balanced at 23 degrees Celsius/50% Air Humidity) • CO2 neutral: LCA report TU Delft (ISO 14040/44) (www.moso-bamboo.com/lca)
Please ask your glue supplier for more information. • Environmental Product Declaration - EPD (EN 15804)
• After the glue has hardened, the floor can be slightly sanded and finished (www.moso-bamboo.com/epd)
(with floor lacquer or oil). • Contribution LEED BD+C - v4: MR 1, MR 2, EQ2
• This floor type can be installed – under certain conditions – on floor heating / cooling. v2009: MR 6, IEQ 4.3
www.moso-bamboo.com/floorheating-cooling • Contribution BREEAM: HEA 2, MAT 1, MAT 5 (HD)
• After installation: make sure proper cleaning and maintenance is done, fitting to the • Guarantee: 30 years
chosen finish.
• Full version available at www.moso-bamboo.com/bamboo-industriale E0 Class is an unofficial formaldehyde emission class, but it is commonly used to indicate that the
1)
product has a very low emission, not detectable (n.d.) emission or is produced with No Added
Formaldehyde (NAF) glues. E0 products automatically qualify for the official E1 Class according EN 717-1.
EN-202104
DoP EPD
EN 17009 EN15804 24You can also read
