MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...

Page created by Carlos Fitzgerald
 
CONTINUE READING
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
MED Membership
Annual Division Update
               Executive Committee
      Manufacturing Engineering Division (MED)
                   July 2021
          Laine Mears, Clemson University
                  Past MED Chair
                                                 1
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Table of Contents

 § Overview
 § Membership Updates
 § Leadership Updates
 § Journal Updates
 § Awards
 § MSEC 2021 Conference Report
 § Technical Committee Reports

                                 2
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Membership Updates
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Membership and Finance
§ Membership (as of June 2020) = 12,270 people
  § Professional (10,575):
      2,234 (Primary), 3,026 (Secondary)
      4,519 (U.S.), 815 (International), remaining unreported
      546 (Academic), 4029 (Industry), remaining unreported
  § Student (1,628):
      1,525 (Primary), 103 (Secondary)
      897 (U.S.) vs. 731 (International)

§ Segregated Fund (as of May 2021)
  § Balance: ~$171,806
  § FY21-22 Budget: ~$29,400 (recommended); additional
    $10,000 requested to support division and society awards

                                                                4
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Leadership Updates
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
The Team of Fiscal Year 2022 (FY22)

§ Executive Committee FY22
   § Past Chair: Laine Mears (Clemson U.)
   § Chair: Moneer Helu (NIST)
   § Vice Chair: Frank Pfefferkorn (U. Wisconsin – Madison)
   § Program Chair: Barbara Linke (UC Davis)
   § Treasurer:Jarred Heigel (Third Wave Systems)
   § Secretary: Mihaela (Miki) Banu (U. of Michigan)

§ Communication: Azadeh Seidaei (Iowa State U.)
§ 2021 Newsletter Editor: Frank Pfefferkorn (UW-Madison)
§ ASME Staff: Barbara Zlatnik, Andrew Koleba, Lori Lee
                                                              6
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Technical Committees 2021-2022
 Technical Committee            Chair                              Vice-Chair                           MSEC 2021
                                                                                                        Symposia
 Additive Manufacturing         Yayue Pan, U. Illinois - Chicago   Chi Zhou, U. of Buffalo              6
 Advanced Materials Mfg.        Miki Banu, U. Michigan             Saeed Farahani, Cleveland State U.   1 + 1 assisted
 Biomanufacturing               Changxue Xu, Texas Tech U.         Yihao Zheng, WPI                     2
 Life Cycle Engineering         Daniel Cooper, U. Michigan         Julius Schoop, U. of Kentucky        2 + 1 assisted
 Manufacturing Equipment and    Burak Sencer, OSU                  Chandra Nath, Maijker                3 + 1 assisted
 Automation
 Manufacturing Processes        Ihab Ragai, PSU Erie               Jingjing Li, PSU                     8 + 5 assisted
 Manufacturing Systems          Hui Wang, FSU                      Xiaoning Jin, Northeastern U.        7 + 1 assisted
 Nano/Micro/Meso                Xinyu Liu, Lamar U.                Rajiv Malhotra, Rutgers U.           3 + 1 assisted
 Manufacturing
 Quality and Reliability        Dazhong Wu, UCF                    Yiran Yang, UT-Arlington             2 + 2 assisted

            Thank you to outgoing chairs: Jarred Heigel (AM), Srikanth Pilla (AMM), Roland Chen (B),
            Nancy Diaz-Elsayed (LCE), Michael Brundage (MS) and Yong Wang (Q&R)
                                                                                                                         7
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
Journal Updates
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
ASME JMSE
MED Membership Annual Division Update - Executive Committee Manufacturing Engineering Division (MED) July 2021 Laine Mears, Clemson University ...
ASME JMSE
§ ASME Journal of Micro and Nano Manufacturing
ASME JMNM

            § All journal information can be found here:

            https://asmedigitalcollection.asme.org/micronanomanufacturing
Awards
Honors and Awards 2020
§ Society Level
   § M. Eugene Merchant Manufacturing Medal (with
     SME) (Committee Chair: John Sutherland)
   Awardee: Krishnamoorthy S. Subramanian, STIMS Institute, Inc.
   § Blackall Machine Tool and Gage
      Award (Committee Chair: Yuebin
      Guo)
   Awardee: ChaBum Lee, Texas A&M University
   § William T. Ennor Manufacturing Technology
     Award (Committee Chair: Yuebin Guo)
   Awardee: Ahmed A. Busnaina, Northeastern University
   § Milton C. Shaw Manufacturing Research
     Medal (Committee Chair: Yong Huang)
   Awardee: Jian Cao, Northwestern University
                                                                   13
Honors and Awards 2020
§ Division Level
   § Best Organizer of Symposium & Sessions Award (BOSS Award)
   Awardees: Ping Guo, Chandra Nath, and Martin Byung-Guk Jun
   For Symposium on Advances in Micro and Nano Manufacturing – Kornel Ehmann Symposium

   § Manufacturing Medal (Committee Chair: Jian Cao)
   Awardees: Obehi G. Dibua, Anil Yuksel, Nilabh K. Roy, Chee S. Foong, and Michael Cullinan
   For the paper titled “Nanoparticle Sintering Model: Simulation and Calibration Against Experimental Data”

   § Chao and Trigger Young Mfg Researcher Award (Committee Chair: Yong Huang)
   Awardee: Alaa Elwany, Texas A&M University

                                                                                                               14
Honors and Awards 2020
§ Division Level (continued)
   § MED Outstanding Service Award
   Awardee: Kevin Chou, University of Louisville
   §   Best Paper Award

   First Place
   Awardees: Md Ferdous Alam, Max Shtein, Kira Barton, and David J. Hoelzle
   “Autonomous Manufacturing Using Machine Learning: A Computational Case Study with a Limited
   Manufacturing Budget”
   Second Place
   Awardees: Yang Xu, Yizhen Zhu, Yifeng Sun, Jie Jin, and Yong Chen
   “A Vibration-Assisted Separation Method for Constrained-Surface-Based Stereolithography”
   Third Place
   Awardees: Sai Kosaraju and Xin Zhao
   “Study of Effect of Repetition Rate on Laser Shock Peening Using Finite Element Modeling”

                                                                                               15
Honors and Awards 2020
§ Recognitions
  § 2020 MSEC Technical Program Chair
       Barbara Linke, University of California, Davis
  § 2020 MSEC Technical Program Vice Chair
       Karl Haapala, Oregon State University
  §   Retiring Associate Editors
       § Journal of Manufacturing Science and Engineering
             •   Wayne Cai, General Motors Global
       §   Journal of Micro and Nano-Manufacturing
             •   Stefan Dimov, University of Birmingham
             •   Ulf Engel, Friedrich Alexander University of Erlangen-Nüremberg
             •   Martin Byung-Guk Jun, Purdue University
             •   Marriner Merrill, US Naval Research Laboratory
             •   Cheryl Xu, North Carolina State University

                                                                                   16
Honors and Awards 2021
§ Society Level
   § M. Eugene Merchant Manufacturing Medal (with SME) (Committee
     Chair: John Sutherland)
   Awardee: K. Scott Smith, ORNL
   § Blackall Machine Tool and Gage Award (Committee
      Chair: Yuebin Guo)
   Not awarded in 2021
   § William T. Ennor Manufacturing Technology Award (Committee
     Chair: Yuebin Guo)
   Awardee: Albert Shih, University of Michigan
   § Milton C. Shaw Manufacturing Research Medal (Committee
      Chair: Yong Huang)
   Not awarded in 2021

                                                                    17
2021 Class of ASME Fellows

           Salil Desai                      William Emblom                         XiaoQi Chen
North Carolina A&T State University   University of Louisiana-Lafayette   Swinburne University of Technology
Honors and Awards 2021
§ Division Level
   § Best Organizer of Symposium & Sessions Award (BOSS Award)
   Awardees: Wenchao Zhao, Dong Lin, Ho Yeung
   For Symposium on Advances in Metal Additive Manufacturing Processes

   § Ehmann Manufacturing Medal (Committee Chair: Jian Cao)
   Awardees: Yang Yang and Keyu Chen (The Chinese University of Hong Kong) and Ping Guo
   (Northwestern University)
   For the paper titled “Noncontact Planar Stage Based on Near-Field Acoustic Transportation,” J. Micro Nano-Manuf. June 2020,
   8(2): 021002, https://doi.org/10.1115/1.4046693

   § Chao and Trigger Young Mfg Researcher Award (Committee Chair: Yong Huang)
   Awardee: Chenhui Shao, University of Illinois at Urbana-Champaign
   § MED Outstanding Service Award
   Awardee: Shawn Moylan, NIST

                                                                                                                       19
Honors and Awards 2021
§ Division Level
   § Student Manufacturing Design Competition
   •   Third place: Kellen Mitchell and Lily Raymond (University of Nevada Reno), “Rotating Internal
       Mandrel Printhead Design for Material Extrusion Manufacturing of Artificial Muscles in Low
       Gravity Environments and Spaceflight”
   •   Second Place: Petro John, Tobias Hynes, Trent Sakakini, Josiah Go, Thien Nguyen, Jayaram
       Rajagopalan (University of Texas Dallas), “Development of Manufacturing Automation for the
       Sorting and Assembly of Nasopharyngeal Swabs”
   •   First Place: Andrew Eyring (Brigham Young University), “Analysis of a Closed-Loop Digital Twin”

   Judges
   • Ihab Ragai (Associate Professor, Penn State Behrend)
   • Jarred Heigel (R&D Manager, Third Wave Systems, Inc.)
   • Dale Lombardo (Special Process Technologies Leader, GE Aviation)

                                                                                               20
Honors and Awards 2021
§ Division Level (continued)
   § MSEC 2021 Best Paper Award
   First Place
   Awardees: Wenxuan Jia, Yuen-Shan Leung, Han Xu, and Yong Chen (University of Southern
   California), Huachao Mao (Purdue University), Chi Zhou (University at Buffalo)
   “Hybrid-Light-Source Stereolithography for Fabricating Macro-Objects with Micro-Textures”
   (MSEC2021-63717)
   Second Place
   Awardees: Prahar M. Bhatt, Rishi K. Malhan, Pradeep Rajendran, Aniruddha V. Shembekar, and
   Satyandra K. Gupta (University of Southern California)
   “Trajectory-Dependent Compensation Scheme to Reduce Manipulator Execution Errors for
   Manufacturing Applications” (MSEC2021-63617)
   Third Place
   Awardees: Yi Wang, Yen Yu Ian Shih, Yuan-shin Lee (North Carolina State University)
   “Vibration-Assisted Insertion of Flexible Neural Microelectrodes with Bio-Dissolvable Guides for
   Medical Implantation” (MSEC2021-63952)
                                                                                                 21
Honors and Awards 2021
§ Recognitions
  § 2021 MSEC Technical Program
     Chair: Karl Haapala, Oregon State University
     Vice Chair: Yong Chen, University of Southern California
  § Retiring Editors
     §   Journal of Manufacturing Science and Engineering
           •   Y. Larry Yao, Columbia University (Editor in Chief)
           •   Hongqiang Chen, GE Global Research (Associate Editor)
           •   Dragan Djurdjanovic, University of Texas at Austin (Associate Editor)
           •   Laine Mears, Clemson University (Associate Editor)
           •   Tony Schmitz, University of Tennessee
     §   Journal of Micro and Nano-Manufacturing
           •   Joey Mead, UMass Lowell (Associate Editor)
           •   Sourabh Saha, Georgia Tech (Associate Editor)
           •   Michael Cullinan, UT Austin (Associate Editor)
                                                                                       22
MSEC 2021
Conference Report
MSEC Conference
§ MSEC2021 – Virtual Format
   • Cincinnati, OH, USA
   • Hosted by the University of Cincinnati, Cincinnati, Ohio
   • Professors Sam Anand, Jing Shi, Murali Sundaram

§ MSEC2022
   • To be hosted by Purdue University, West Lafayette, IN USA
   • Professors Martin Jun, Benxin Wu
   • June 27 – July 1, 2022, planning for in-person event

                                                                 24
MSEC Conference Student Support
§ A student support grant was generously funded by the National Science
  Foundation
§ Allowed for 197 student registrations, including
    § 51 women
    § 11 Latino / African American
    § 23 undergraduates

                   NSF Grant PI
                   Prof. Arif Malik
                   U. Texas - Dallas

                                                                          25
MSEC 2021 Technical Report

    Technical Program Chair   Technical Program Co-Chair
    Prof. Karl Haapala        Prof. Yong Chen
    Oregon State University   University of Southern California

                                                                  26
Technical Program Overview
• 25 Symposia under 9 Tracks
   •   Additive Manufacturing
                                              Special Sessions and Events
                                              NSF Early Career Forum
   •   Advanced Materials Manufacturing       Student Manufacturing Design Competition
   •   Biomanufacturing                       Women in Advanced Manufacturing Forum
   •   Life Cycle Engineering                 6 MED 100 State of the Art Paper Updates
   •   Manufacturing Equipment/Automation     16 Doctoral Symposium Speakers (new)
   •   Manufacturing Processes                7 Invited Symposium Speakers
   •   Manufacturing Systems                  1 Industry Speaker
   •   Nano/Micro/Meso Manufacturing          42 Posters
   •   Quality & Reliability
• 2 joint symposia with the Japan Society of Mechanical Engineers
• 39 technical sessions
Technical Publications and Posters
• Technical Publications
   •   186 papers reviewed
   •   29 papers rejected/withdrawn after draft stage
   •   9 papers withdrawn/removed after revision stage
   •   148 papers published (Acceptance rate: 80%)
• Posters
   •   49 submitted
   •   8 withdrawn/removed
   •   35 presented and published in conference proceedings
   •   7 presentation only
Student Awards (new for MSEC 2021)

• Best Doctoral Symposium Awards ($100 each)
  • Karl Schuchard, North Carolina State University
  • Yizhou Jiang, University of Southern California
  • Nathan Hertlein, University of Cincinnati

• Best Poster Awards ($50 each)
  •   Yinan Wang, Virginia Tech
  •   Rana Dabaja, University of Michigan
  •   Moataz Abdulhafez, University of Pittsburgh
  •   Liangkui Jiang, Iowa State University
  •   Mohammad Ali Ansari, University of Wisconsin-Madison
  •   Julianne Jonsson, University of California Davis
By the Numbers: Symposia and Papers

        Symposia per Track                 Papers per Track
                                                    3                   Manufacturing Processes
             1 1                                6
         3              8                   8                           Additive Manufacturing
                                                              35
                                      11                                Manufacturing Systems
    4
                                                                        Manufacturing Equipment
                                                                        and Automation
                                 17                                     Nano/Micro/Meso
                                                                        Manufacturing
4                                                                       Biomanufacturing
                             7
                                                                   28   Life Cycle Engineering

                                      21                                Quality & Reliability
        5                                                               Advanced Materials
                    6                                   23              Manufacturing
By the Numbers: Papers by Country
                                       United States
              Canada                   China (Mainland)
                2%                     Japan
    Germany                            India
      3%                               Germany
                                       Canada
      India                            Italy
       5%                              New Zealand
                                       Australia
     Japan                             Belgium
      9%                               Hong Kong (Greater China)
                                       Malaysia
                                       Norway
                                       Romania
 China (Mainland)                      Saudi Arabia
       15%             United States   South Africa
                           57%         Spain
                                       Sweden
Recognition of Symposium Organizers

Dr. Mohammad Abubaker Nabhan   Dr. Bulent Arda Gozen      Dr. Dong Lin              Dr. Nilabh Roy            Dr. Xi (Vincent) Wang
Dr. Farbod Akhavan Niaki       Ms. Anne Gu                Dr. Xun Liu               Dr. Dinakar Sagapuram     Dr. Yancheng Wang
Dr. Ahmed Azab                 Dr. Changsheng Guo         Dr. Rui Liu               Dr. Sourabh Saha          Dr. Dazhong Wu
Dr. Mihaela Banu               Dr. Ping Guo               Dr. Yuqian Lu             Dr. Anasuya Sahoo         Dr. Thorsten Wuest
Dr. Mostafa Bedewy             Dr. Yang Guo               Dr. Sarah Lukens          Dr. Meisam Salahshoor     Prof. Xun Xu
Dr. William Z. Bernstein       Dr. Azadeh Haghighi        Dr. Yuefeng Luo           Dr. Julius Schoop         Prof. Hitomi Yamaguchi
Dr. Wayne Cai                  Dr. Miao He                Dr. Rachid M’Saoubi       Mr. Thurston Sexton       Dr. Yiran (Emma) Yang
Mr. Rahul Chaudhari            Dr. Melinda Hodkiewicz     Dr. Chao Ma               Dr. Elias Shakour         Dr. Yang Yang
Dr. Yujie Chen                 Dr. Naruhiro Irino         Mr. Satoru Maruyama       Mr. Mike Smith            Dr. Chang Ye
Dr. Kyle Christensen           Dr. Muhammad P. Jahan      Dr. Atsushi Matsubara     Dr. Xuan Song             Dr. Ho Yeung
Dr. Abigail Clarke-Sather      Dr. Yifei Jin              Dr. Takashi Matsumura     Dr. Felicia Stan          Dr. Jun Yin
Dr. Weilong Cong               Dr. Martin Jun             Ms. K. C. Morris          Dr. Murali Sundaram       Dr. Xiaowei Yue
Dr. Daniel Cooper              Mr. Asif Khan              Dr. Rachid M'Saoubi       Dr. Norikazu Suzuki       Dr. Danning Zhang
Dr. Nancy Diaz-Elsayed         Dr. Bashir Khoda           Dr. Chandra Nath          Dr. Yasuhiro Takaya       Dr. Meng Zhang
Mr. Ashu Dikshit               Dr. Boonserm Kulvatunyou   Dr. Chinedum Okwudire     Dr. Wenda Tan             Dr. Yunbo (Will) Zhang
Dr. Xiaolei Fang               Dr. Mathew Kuttolamadom    Dr. Sei Jin Park          Dr. Herman Tang           Dr. Xin Zhao
Dr. Saeed Farahani             Dr. Tsz-Ho Kwok            Dr. Srikanth Pilla        Dr. Koushik Viswanathan   Dr. Yihao Zheng
Dr. Kun (Kelvin) Fu            Dr. Xiangjia (Cindy) Li    Dr. Guixiu “Helen” Qiao   Dr. Lihui Wang            Dr. Chi Zhou
Dr. M. Gadalla                 Dr. Yongbing Li            Dr. Fabrizio Quadrini     Dr. Michael Cai Wang      Dr. Wenchao Zhou
Dr. Brian Giera                Dr. Steven Y. Liang        Dr. Prahalada Rao
Recognition of Track Organizers

    Track                                  Track Chair                                   Track Co-Chair
1   Additive Manufacturing                 Jarred Heigel (Third Wave Systems)            Yayue Pan (University of Illinois Chicago)
2   Advanced Materials Manufacturing       Srikanth Pilla (Clemson University)           Mihaela Banu (University of Michigan)
3   Biomanufacturing                       Roland Chen (Washington State University)     Changxue Xu (Texas Tech University)
4   Life Cycle Engineering                 Nancy Diaz-Elsayed (Univ. of South Florida)   Daniel Cooper (University of Michigan)
5   Manufacturing Equipment/Automation     Burak Sencer (Oregon State University)        Chandra Nath (Maijker Inc.)
6   Manufacturing Processes                Ihab Ragai (Penn State Erie)                  Jingjing Li (Penn State University)
7   Manufacturing Systems                  Michael Brundage (NIST)                       Hui Wang (Florida State University)
8   Nano/Micro/Meso Manufacturing          Rajiv Malhotra (Rutgers University)           Ping Guo (Northwestern University)
9   Quality & Reliability                  Yong Wang (Binghamton University)             Dazhong Wu (Univ. of Central Florida)

Posters & Doctoral Symposium               Yong Chen (Univ. of Southern California)      Karl Haapala (Oregon State University)
Student Manufacturing Design Competition   Frank Pfefferkorn (University of Wisconsin)
MED 100 State of the Art Paper Updates     Laine Mears (Clemson University)              Albert Shih (University of Michigan)
Technical Committee Reports
Technical Committee Reports
•   Additive Manufacturing
•   Advanced Materials Manufacturing
•   Biomanufacturing
•   Life Cycle Engineering
•   Manufacturing Equipment and Automation
•   Manufacturing Processes
•   Manufacturing Systems
•   Micro-Nano-Meso Manufacturing
•   Quality and Reliability
ASME MED Advanced Materials Manufacturing (AMM) Technical Committee (TC)

                                        Report for MSEC 2021

                                              July 17, 2021

A. Technical Committee Membership
   Number of continuing TC Members: Total: 4 (list in Appendix). Membership updated on July 17, 2021,
   based on the 4-year-service rule established in 2008.
   TC Members to date:
   Saeed   Farahani        sfaraha@clemson.edu
   Morteza Sabet           ssabet@clemson.edu
   Chenhui Shao            chshao@illinois.edu
   Azadeh Sheidahei        sheidaei@iastate.edu

   Chair: Srikanth Pilla (Clemson University)   spilla@clemson.edu
   Vice-Chair: Miki Banu (University of Michigan) mbanu@umich.edu

   New Chair: Miki Banu (University of Michigan)
   New Vice-chair: Saeed Farahani (Clemson University/Cleveland State University)

B. Update on MP TC Activities
1. MSEC 2021
    • AMM TC received 1 symposium proposal and it is approved and sponsored.
    • TC member Saeed Farahani is the Technical Program Chair for MSEC 2021.
      List of Symposia (3)
   1. 02-01 Advanced Materials Manufacturing
        • Saeed Farahani, Clemson University
        • Miki Banu, University of Michigan

AMM TC recommended the following paper for inclusion in ASME journal. Also, one of the papers was
nominated for best paper award.

 Session    Recommended Papers for Journal Publication                              Best paper
                                                                                    award?
 02-01      MSEC2021-64916 1             Investigation of the Dynamic Response      Yes
                                         of a Multispot System at Joining Using
                                         Ultrasonic Welding

                                                    1
ASME MED Biomanufacturing Technical Committee (TC)

                             Report (virtually) in 2021

                                    June 23rd, 2021

A. Technical Committee Membership
  Number of continuing TC Members: Total: 25 (listed in Appendix). Membership updated
  on June 12th, 2021.

  New TC Members who will join in July 2021
    Kaiyan Qiu (Washington State University)
    Lei Chen (University of Massachusetts Lowell)

  Chair: Roland Chen (Washington State University)
  Vice-Chair: Changxue Xu (Texas Tech University)

B. Update on Biomanufacturing TC Activities
1. MSEC 2021
  •  The Biomanufacturing TC received two symposium proposals. Two were approved and
     sponsored.
  List of Symposia

  1. Advances in Biomanufacturing of Tissue-Engineered Scaffolds and Organs
      Dr. Yifei Jin, University of Nevada, Reno, Reno, NV, USA, yifeij@unr.edu
      Dr. Jun Yin, Zhejiang University, Hangzhou, China, junyin@zju.edu.cn
      Dr. Kyle Christensen, Embody Inc. Norfolk, VA, USA, kchristensen@embody-inc.com

  2. Advances in Analysis, Design, and Manufacturing of Biomedical Devices
      Dr. Yihao Zheng, University of Michigan, Ann Arbor, MI, yhzheng@umich.edu
      Dr. Yancheng Wang, Zhejiang University, Hangzhou, China, yanchwang@zju.edu.cn
      Dr. Anne Gu, Boston Scientific, Marlborough, MA anne.gu@bsci.com

  •   The Biomanufacturing TC nominated a Symposium Invited Speaker, Dr. Michael
      McAlpine from University of Minnesota. The nomination was approved by the MED EC.
      The title of the talk was: “3D Printing Functional Materials & Devices.”

2. MSEC 2022
  •   The Biomanufacturing TC currently has not received symposium proposals for MSEC
      2022
  •   The Biomanufacturing TC nominated a State-of-the-Art paper to be presented in MSEC
      2022. entitled: A State-of-the-Art Review on Manufacturing Processes Geared towards
      Precision Medicine.

                                             1
Appendix: List of the 2021-2022 ASME MED Biomanufacturing Technical Committee Members (Updated June 12th, 2021)
Continuing Members

        No.     Last Name         First Name       Affiliation
        1       Chang             Robert           Stevens Institute of Technology
        2       Tai               Bruce            Texas A&M University
        3       Chen              Roland           Washington State University
        4       Wang              Yancheng         Zhejiang University, Hangzhou, China
        5       Xu                Changxue         Texas Tech University
        6       Zheng             Yihao            Worcester Polytechnic Institute
        7       Yin               Jun              Zhejiang University, Hangzhou, China
        8       Bedewy            Mostafa          University of Pittsburgh
        9       Salary            Ross             Marshall University
        10      Jin               Yifei            University of Nevada - Reno
        11      McGill            Carl             Abbott Laboratories, Chicago, IL
        12

   New Committee Members (1):
        No.     Last Name        First Name        Affiliation
        1       Kaiyan           Qiu               Washington State University
        2       Chen             Lei               University of Massachusetts Lowell

                                                                  2
ASME MED Life Cycle Engineering (LCE) Technical Committee (TC)

                              Report for MSEC 2021

                                    June 18, 2021

A. Committee Membership
  Number of Committee Members: Total: 29 (please see list in Appendix). Membership
  updated on June 18, 2021, based on the 4-year service rule established in 2017.

  New Members who joined in 2021:
  Not Applicable

  Chair: Nancy Diaz-Elsayed (University of South Florida)
  Vice-Chair: Daniel Cooper (University of Michigan)

B. Update on LCE TC Activities
1. MSEC 2021
  The 2021 ASME International Manufacturing Science and Engineering Conference (MSEC
  2021) and the 49th North American Manufacturing Research Conference (NAMRC50) will be
  hosted (virtually) by the University of Cincinnati, June 21-25, 2021.
  • This year, we received 2 symposium proposals. Both proposals were approved and
     sponsored (please see list below).
  • We also received one nomination for an invited speaker, Dr. Björn Johansson, who was
     approved for MSEC 2021 (see details below).

  List of Symposia (2):

  •   4-1 Smart Manufacturing for Resilient and Environmentally-Efficient Systems
      (Co-hosted with Manufacturing Systems TC)
      Nancy Diaz-Elsayed, University of South Florida, nancyd1@usf.edu
      KC Morris, National Institute of Standards and Technology, kcm@nist.gov
      Julius Schoop, University of Kentucky, julius.schoop@uky.edu

  •   4-2 Advances in Sustainable Manufacturing Processes and Systems
      (Co-hosted with Additive Manufacturing TC)
      Daniel Cooper, University of Michigan, drcooper@umich.edu
      William Bernstein, National Institute of Standards and Technology,
             William.berstein@nist.gov
      Abigail Clarke-Sather, University of Minnesota, Duluth, abbie@umn.edu

                                            1
Invited Speaker:
     Björn Johansson, Professor of Sustainable Production, Chalmers University of
     Technology will present on “Tradeoff Analysis Using Digital Tools for Sustainable
     Manufacturing”.

  Additional LCE TC Activities:
    The LCE TC held a meeting on August 20, 2020 to discuss the future directions of the LCE
    and ongoing research of the members of the technical committee. A summary of the
    research topics that members are working on is summarized in the word cloud below.

                      Figure 1: Word cloud of research areas of the LCE TC members.

     The MSEC symposia sponsored by LCE was actively advertised on social media and to
     the members of the TC to increase the number of paper submissions this year relative to
     prior years. Ultimately, 10 paper submissions were received for the two symposia (9 papers
     were accepted and 1 paper was rejected).

C. MSEC 2022
  The 2022 ASME International Manufacturing Science and Engineering Conference (MSEC
  2021) and the 50th North American Manufacturing Research Conference (NAMRC50) will be
  hosted by the Purdue University College of Engineering June 27-July 1, 2022 in West
  Lafayette, Indiana, USA.

  The LCE TC has not received symposium proposals for MSEC 2022.

  A state-of-the-art (SOA) paper has been proposed and approved on the following topic:
  “Sustainability 4.0: The Impact of Industry 4.0 Technologies Towards Realizing Sustainable
  Manufacturing”. The paper is being authored by: Devarajan Ramanujan, William Bernstein,
  Nancy Diaz-Elsayed, and Karl Haapala for an intended submission for publication in fall 2022.

                                                   2
ASME MED Manufacturing Equipment & Automation (ME) Technical
                     Committee (TC)

                                 Report for MSEC 2020

                                       July 21, 2020

A. Technical Committee Membership
   Chair:              Dr. Burak Sencer (Oregon State University)
   Vice-Chair:         Dr. Chandra Nath (Maijker Corp.)

B. Update on ME TC Activities
1. MSEC 2021
   •   ME TC approved 4 symposia proposals for MSEC 2021. 3 of those were led by the ME
       TC itself and 1 was led by the MP TC. In addition, 2 of the symposia were organized jointly
       with the JSME this year.

List of Symposia (4)
(1) Innovations in the Design and Control of Manufacturing Machines and Equipment
(ASME-JSME Joint Symposium)
    • Dr. Martin Jun, Purdue University, West Lafayette IN, USA. mbgjun@purdue.edu
    • Dr. Chandra Nath, Maijker Corp., West Lafayette, IN, USA. chandra.nath@maijker.com
    • Dr. Atsushi Matsubara, Kyoto University, JAPAN. matsubara@prec.kyoto-u.ac.jp
    • Mr. Naruhiro Irino, DMG Mori. Co., Ltd., JAPAN. na-irino@dmgmori.co.jp

(2) Advanced Machining and Metrology for Smart Manufacturing Technologies (ASME-
JSME Joint Symposium)
    • Dr. Norikazu Suzuki, Nagoya University, nsuzuki@mech.nagoya-u.ac.jp
    • Dr. Toshiyuki Muraki, Yamazaki Mazak Corporation, Toshiyuki_Muraki@mazak.co.jp
    • Dr. Takashi Matsumura, Tokyo Denki University, tmatsumu@cck.dendai.ac.jp

(3) Tribology of Manufacturing Processes and Machinery
    • Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
    • Dr. Mathew Kuttolamadom, Texas A&M University, mathew@tamu.edu
    • Dr. Rachid M’Saoubi, Seco Tools AB, Fagersta, Sweden,
       rachid.msaoubi@secotools.com.

(4) Advances in the Mechanics of Cutting, Forming and Materials Processing
    • Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
    • Dr. Koushik Viswanathan, Indian Institute of Science, koushik@iisc.ac.in
    • Dr Yang Guo, Michigan State University, yguo@egr.msu.edu
    • Dr. Rachid M’Saoubi, Seco Tools AB, Fagersta, Sweden,
       rachid.msaoubi@secotools.com.

                                                1
2. MSEC 2022
   •   ME TC has received and forwarded 3 symposium proposals so far (July 20, 2021).

List of Symposia (3)

(1) Innovations in the Design and Control of Manufacturing Machines and Equipment
     • Dr. Chandra Nath, Maijker Corp, West Lafayette, IN, USA chandra.nath@maijker.com
     • Dr. Burak Sencer, Oregon State University, Corvallis, OR, USA,
        burak.sencer@oregonstate.edu
     • Dr. Martin Jun, Purdue University, West Lafayette, IN, USA, mbgjun@purdue.edu

(2) Advances in the Mechanics of Cutting, Forming and Materials Processing
    • Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
    • Dr. Koushik Viswanathan, Indian Institute of Science, koushik@iisc.ac.in
    • Dr Yang Guo, Michigan State University, yguo@egr.msu.edu

(3) Tribology of Material Removal/Deformation Processes and Machinery
    • Dr. Mathew Kuttolamadom, Texas A&M University, mathew@tamu.edu
    • Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
    • Dr. Rachid M'Saoubi, Seco Tools AB, Sweden, achid.msaoubi@secotools.com

                                             2
ASME MED Manufacturing Processes (MP) Technical Committee (TC)

                              Report for MSEC 2021

                                    June 12, 2021

A. Technical Committee Membership
  Number of continuing TC Members: 51 continuing members (list in appendix). 4 members
  (highlighted in yellow) have not reported new activities and, therefore, their committee
  membership is not renewed for another term. There are 20 potential new members (list in
  Appendix) and 5 recently retired members. Membership updated on June 12, 2021, based on
  the 4-year-service rule established in 2008.

  Chair (2020-2022): Ihab Ragai (PSU-Erie)
  Vice Chair (2020-2022): Jingjing Li (PSU-University Park)

B. Update on MP TC Activities
1. MSEC 2021
  • MP TC received 17 symposium proposals of which 13 were approved and sponsored, and
  2 others were moved to other TCs.
     List of Approved Symposia (13)

  1. Advances in Mechanics of Materials in Modern Manufacturing and Materials
     Processing Techniques (w/ Mfg. Equipment)
         a. Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
         b. Dr. Koushik Viswanathan, Indian Institute of Science, koushik@iisc.ac.in
         c. Dr. Yang Guo, Michigan State University, yguo@msu.edu
         d. Dr. Rachid M’Saoubi, Seco Tools AB, rachid.msaoubi@secotools.com

  2. Tool Wear Mechanisms, Measurements, and Monitoring
         a. Dr. Rui Liu, Rochester Institute of Technology, rleme@rit.edu
         b. Dr. Steven Y. Liang, Georgia Institute of Technology, steven.liang@me.gatech.edu
         c. Dr. Meisam Salahshoor, Saint-Gobain R&D NA, meisam.salahshoor@saint-
            gobain.com

                                            1
3. Advances in Finishing Processes: Hard Machining, Grinding, and Abrasive Finishing
      a. Mr. Rahul Chaudhari, The Timken Company, rahul.chaudhari@timken.com
      b. Dr. Changsheng Guo, Ratheyon Technologies, changsheng.guo@utc.com
      c. Prof. Hitomi Yamaguchi, University of Florida, hitomiy@ufl.edu

4. Advances in Processing of Polymers and Polymer Composites
      a. Dr. Felicia Stan, Dunarea de Jos University of Galati, felicia.stan@ugal.ro
      b. Dr. Anasuya Sahoo, University of Minnesota, sahoo017@umn.edu
      c. Dr. Fabrizio Quadrini, University of Rome Tor Vergata,
         fabrizio.quadrini@uniroma2.it

5. Advances in Nontraditional Manufacturing Processes
      a. Dr. Murali Sundaram, University of Cincinnati, murali.sundaram@uc.edu
      b. Dr. Yuefeng Luo, GE Aviation, yuefeng.luo@ge.com
      c. Dr. Muhammad P. Jahan, Miami University, jahanmp@miamioh.edu
      d. Dr. Meng Zhang, Kansas State University, meng@ksu.edu

6. Advances in Lightweight and Dissimilar Materials Joining
      a. Dr. Yongbing Li, Shanghai Jiao Tong University, yongbinglee@sjtu.edu.cn
      b. Dr. Xun Liu, The Ohio State University, liu.7054@osu.edu
      c. Dr. Wayne Cai, General Motors Global R&D Center, wayne.cai@gm.com

7. Laser-based Advanced Manufacturing and Material Processing
      a. Dr. Xin Zhao, Clemson University, xzhao5@clemson.edu
      b. Dr. Wenda Tan, The University of Utah, wenda.tan@mech.utah.edu
      c. Dr. Chang Ye Huazhong, University of Science and Technology, cye@hust.edu.cn

8. Advances in Assisted and Augmented Manufacturing Processes
      a. Dr. Weilong Cong, Texas Tech University, weilong.cong@ttu.edu
      b. Dr. Meng Zhang, Kansas State University, meng@ksu.edu
      c. Dr. Farbod Akhavan Niaki, The Timken Company, farbod.niaki@timken.com

9. Advances in Metal Additive Manufacturing Processes (w/ Additive Mfg. TC)

                                          2
a. Dr. Wenchao Zhou, University of Arkansas, zhouw@uark.edu
        b. Dr. Dong Lin, Kansas State University, dongl@ksu.edu
        c. Dr. Ho Yeung, NIST, ho.yeung@nist.gov

  10. Additive Manufacturing with Functional Polymers, Multi-material Structures and
      Composites (w/ Additive Mfg. TC)
        a. Dr. Bulent Arda Gozen, Washington State University, arda.gozen@wsu.edu
        b. Prof. Kun (Kelvin) Fu, University of Delaware, kfu@udel.edu
        c. Dr. Danning Zhang, Wisk Aero, danning.zhang@wisk.aero
        d. Ashu Dikshit, Schlumberger, ADikshit@slb.com

  11. Additive Manufacturing of Ceramics, Concretes, and Composites (w/ Additive Mfg.
      TC)
        a. Dr. Chao Ma, Texas A&M University, cma@tamu.edu
        b. Dr. Weilong Cong, Texas Tech University, weilong.cong@ttu.edu
        c. Dr. Xuan Song, University of Iowa, xuan-song@uiowa.edu

  12. Tribology of Manufacturing Processes and Machinery (w/ Mfg. Equipment TC)
        a. Dr. Mathew Kuttolamadom, Texas A&M University, mathew@tamu.edu
        b. Dr. Dinakar Sagapuram, Texas A&M University, dinakar@tamu.edu
        c. Dr. Rachid M'Saoubi, Seco Tools AB, rachid.msaoubi@secotools.com

  13. Innovations in the Design and Control of Manufacturing Machines and Equipment
      (ASME-JSME Joint Symposium) (w/ Mfg. Equipment TC)
        a. Dr. Martin Jun, Purdue University, mbgjun@purdue.edu
        b. Dr. Chandra Nath, Maijker Corp., chandra.nath@maijker.com
        c. Dr. Atsushi Matsubara, Kyoto University, matsubara@prec.kyoto-u.ac.jp
        d. Dr. Naruhiro Irino, DMG Mori. Co., Ltd., na-irino@dmgmori.co.jp

2. MSEC 2022
 The 2022 ASME International Manufacturing Science & Engineering Conference (MSEC
 2022) and the 50th North American Manufacturing Research Conference (NAMRC50) will be
 held at Purdue University on June 27- July 1, 2022.
  • MP TC is currently soliciting the symposium proposals

                                          3
ASME MED Manufacturing Systems (MS) Technical Committee (TC)

                               Report for MSEC 2021

                                        May 2021

A. Committee Membership
  Number of Committee Members: Total: 75 (list in Appendix). Membership updated on
  May 27, 2021, based on the 4-year service rule established in 2008. Please note: Dates joined
  were not provided before 2016 by previous TC leadership.

  New Members who joined in 2019: 17

  George Smith (Magna Powertrain)
  Yuqian Lu (University of Auckland)
  Kira Barton (University of Michigan)
  Miguel Saez (General Motors)
  Joseph Sims (ASRDC)
  Ahmed Azab (University of Windsor)
  Thurston Sexton (NIST)
  Sarah Lukens (GE Digital)
  Melinda Hodkiewicz (Univ. of W. Australia)
  Feng Ju (Arizona State University)
  Cindy Chang (University of Virginia)
  Mohsen Mosleh (Howard University)
  Khosro Shirvani (Rowan University)
  John Belk (ZeroTechnology)
  Rui Liu (RIT)
  Helen Qiao (NIST)
  Patrick Spicer (General Motors)

  Chair: Michael Brundage (NIST)
  Vice-Chair: Hui Wang (FSU)

  New Members who joined in 2020: 3

  Thorsten Wuest (West Virginia University)
  Azadeh Haghighi (University of Illinois at Chicago)
  Asif Khan (FCA group)

  Chair: Michael Brundage (NIST)
  Vice-Chair: Hui Wang (FSU)

                                              1
B. MSEC 2021

    Number of Committee Members: Total: 75 (list in Appendix). Membership updated on May
27, 2021 based on the 4-year service rule established in 2008.

   Chair: Michael Brundage (NIST)
   Vice-Chair: Hui Wang (FSU)

    The Manufacturing Engineering Division (MED) of ASME, the North American
Manufacturing Research Institution of SME and The Japan Society of Mechanical Engineers
(JSME) are pleased to co-sponsor the 2021 International Manufacturing Science & Engineering
Conference (MSEC), the 49th North American Manufacturing Research Conference (NAMRC)
and LEM&P (title name under review). The collocated conferences will be hosted by the
University of Cincinnati, College of Engineering and Applied Science, on June 21 – 25, 2021
virtually.

MS TC received 7 symposium proposals for MSEC2021 (1 split with LCE, 1 split with Q&R).

List of Symposia
 7-1 Smart Maintenance Operations through Algorithmic Support and Human-Centered
 Design
    Thurston Sexton         NIST                      thurston.sexton@nist.gov
    Sarah Lukens            GE Digital                sarah.lukens@ge.com
    Melinda Hodkiewicz      Univ. of W. Australia     melinda.hodkiewicz@uwa.edu.au

 7-2 Cyber-Physical Systems and Cybersecurity in Industry 4.0

   Rui Liu                     RIT                        rleme@rit.edu
   Dazhong Wu                  University of Central      Dazhong.Wu@ucf.edu
                               Florida
   Helen Qiao                  NIST                       guixiu.qiao@nist.gov

 7-3_QR Advances in Quality and Continuous Improvement in Manufacturing
 Development and Execution
    Mike Smith               Magna International    mike.smith1@magna.com
    Herman Tang              Eastern Michigan       htang2@emich.edu
                             University

 7-4 Cognitive Manufacturing: Opportunities, Challenges, Technologies & Applications

   Yuqian Lu                   University of Auckland     yuqian.lu@auckland.ac.nz
   Thorsten Wuest              West Virginia University   thwuest@mail.wvu.edu
   Boonserm Kulvatunyou        NIST                       boonserm.kulvatunyou@nist.gov

                                             2
7-5 Robotic Manufacturing and Assembly in Smart Factories

  Azadeh Haghighi            University of Illinois at   ahaghi3@uic.edu
                             Chicago
  Lihui Wang                 KTH                         lihuiw@kth.se

7-6 Industrial Internet, Cloud and Digital Twins in the Wake of COVID-19

  Xi Wang                    KTH                         wangxi@kth.se
  Xun Xu                     University of Auckland      xun.xu@auckland.ac.nz
  Yujie Chen                 Caterpillar                 chen_yujie@cat.com

7-7_LCE Role of Changeable Transformable Manufacturing & Distributed Green
Supply Chains in Pandemic Recovery Efforts
   Ahmed Azab               University of Windsor  azab@uwindsor.ca
   Mohamed Gadalla          Alabama A&M            mohamed.gadalla@aamu.edu
   Asif Khan                FCA Group              asif.khan@fcagroup.com

                                            3
ASME MED Micro-Nano-Meso Manufacturing (MNMM) Technical

                                   Committee (TC)

                              Report for MSEC 2021

                                    June 20, 2021

A. Committee Membership
  Number of Committee Members: Total 16 (list in Appendix). Membership updated on
  June 20, 2021, based on the 4-year serving rule established in 2008.

  New Member who joined in 2020:

  No.      First Name               Last Name       Affiliation
  1      Mostafa                  Bedewy          University of Pittsburgh
  2      Micheal Cai              Wang            University of South Florida
  3      Sei Jin                  Park            Lawrence Livermore National
                                                  Laboratory
  4      Sourabh                  Saha            Georgia Institute of Technology
  5      Brian                    Giera           Lawrence Livermore National
                                                  Laboratory
  6      Nilabh                   Roy             Canon Nanotechnologies

  7      Yasuhiro                 Takaya          Osaka University

  8      Satoru                   Takahashi       The University of Tokyo

  9      Satoru                   Maruyama        Tokyo Seimitsu Co.,LTD.

  Chair: Rajiv Malhotra (Rutgers University)
  Vice-Chair: Ping Guo (Northwestern University)

B. Update on Q&R TC Activities
1. MSEC 2020
  •     MNMM TC received 5 symposium proposals of which 4 were approved and sponsored.
        Two of these as-received symposia were combined into one symposium.

                                              1
List of Symposia (4)
1. Low-dimensional Nanostructured carbon and Related Materials: Synthesis, Self-
Organization, and Printing
Dr. Mostafa Bedewy, University of Pittsburgh, Pittsburgh, PA, USA. 412-624-2682;
mbedewy@pitt.edu
Dr. Michael Cai Wang, University of South Florida, FL, USA. 813-974-8586;
mcwang@usf.edu
Dr. Sei Jin Park, Lawrence Livermore National Laboratory, CA, USA. 925-422-8160;
park39@llnl.gov

2. Advances in Micro- and Nano-scale Additive Manufacturing
Dr. Sourabh Saha, Georgia Institute of Technology, Atlanta, GA, USA. 404-894-3622;
ssaha8@gatech.edu
Dr. Brian Giera, Lawrence Livermore National Laboratory, Livermore, CA, USA. 925-422-2518;
giera1@llnl.gov
Dr. Nilabh Roy, Canon Nanotechnologies, Austin, TX, USA. 512-363-2167;
nroy@cnt.canon.com

3. Advanced Metrology, Measurement and Instrumentation in Smart Manufacturing
Processes
Dr. Yasuhiro Takaya, Osaka University, Suita, Osaka, Japan. +81-6-6879-7320;
takaya@mech.eng.osaka-u.ac.jp
Dr. Satoru Takahashi, The University of Tokyo,Tokyo, Japan, +81-3-5452-
5187; takahashi@nanolab.t.u-tokyo.ac.jp
Mr. Satoru Maruyama, Tokyo Seimitsu Co.,LTD., Tsuchiura, Ibaraki, Japan, +81-29-831-1234;
s.maruyama@accretech.jp

4. Advances in Micro and Nano Manufacturing
Dr. Ping Guo, Northwestern University, Evanston, IL, Ph: 847-491-4029,
ping.guo@northwestern.edu
Dr. Bashir Khoda, The University of Maine, Orono, ME, USA. 207-581-5183;
bashir.khoda@maine.edu
Dr. Martin Byung-Guk Jun, Purdue University, West Lafayette, IN, Ph: 765-496-3376,
mbgjun@purdue.edu
Dr. Chandra Nath, Maijker Corp., West Lafayette IN, Ph: 217-607-3029,
chandra.nath@maijker.com

C. MSEC 2021
   •   Q&R TC received 0 symposium proposals so far (June 20, 2020). The chair has not yet
       publicized the CFP since it just went out. More proposals should be available in the next
       few months.

                                               2
ASME MED Quality and Reliability (Q&R) Technical Committee (TC)

                                    Report for MSEC 2021

                                          June 19, 2021

A. Committee Membership
   Number of Committee Members: Total 14 (list in Appendix). Membership updated on
   June 19, 2021, based on the 4-year serving rule established in 2008.

   New Member who joined in 2021:
   No.     First Name         Last Name         Affiliation
   1       Chenang            Liu               Oklahoma State University

   Chair: Dazhong Wu (University of Central Florida)
   Vice-Chair: Yiran Yang (University of Texas at Arlington)

B. Update on Q&R TC Activities
1. MSEC 2021
Q&R TC received 3 symposium proposals of which 3 was approved and 1 was sponsored.

List of Symposia (1)

1. Data-Enabled Modeling, Detection, Optimization, and Prognostics for Quality and Reliability
Improvement of Advanced Manufacturing Systems

Dr. Xiaowei Yue, Virginia Tech, Blacksburg, VA, USA. 540-231-9081; xwy@vt.edu
Dr. Xiaolei Fang, North Carolina State University, Raleigh, NC, USA. 919-515-0312; xfang8@ncsu.edu
Dr. Mohammad Abubaker Nabhan, King Fahd University of Petroleum & Minerals, Saudi Arabia;
nabhan@kfupm.edu.sa

C. MSEC 2022

The 2022 International Manufacturing Science & Engineering Conference (MSEC 2022) and the
50th North American Manufacturing Research Conference (NAMRC50) will be hosted by the
Purdue University, June 27 – July 1, 2022 in West Lafayette, Indiana, USA.

Q&R TC received 0 symposium proposals so far (June 18, 2021).

                                                 1
You can also read