GA45GLV EN DE - electrolux-medialibrary.com
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
GA45GLV EN Dishwasher User Manual 2 DE Geschirrspüler Benutzerinformation 29
2 www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................2
2. SAFETY INSTRUCTIONS..................................................................................4
3. PRODUCT DESCRIPTION................................................................................ 6
4. CONTROL PANEL............................................................................................. 7
5. PROGRAMME SELECTION.............................................................................. 8
6. BASIC SETTINGS ........................................................................................... 10
7. BEFORE FIRST USE....................................................................................... 14
8. DAILY USE....................................................................................................... 15
9. HINTS AND TIPS............................................................................................. 17
10. CARE AND CLEANING..................................................................................19
11. TROUBLESHOOTING....................................................................................22
12. TECHNICAL INFORMATION......................................................................... 26
13. GUARANTEE ................................................................................................ 27
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is notENGLISH 3
responsible for any injuries or damage that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
• Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
• Do not let children play with the appliance.
• Keep detergents away from children.
• Keep children and pets away from the appliance when
the door is open.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
• This appliance is intended to be used in household
and similar applications such as:
– farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
• Follow the maximum number of 9 place settings.4 www.electrolux.com
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
• Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
• Do not use high pressure water sprays and/or steam
to clean the appliance.
• If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation 2.2 Electrical connection
WARNING! WARNING!
Only a qualified person must Risk of fire and electric
install this appliance. shock.
• Remove all the packaging. • The appliance must be earthed.
• Do not install or use a damaged • Make sure that the parameters on the
appliance. rating plate are compatible with the
• Do not use the appliance before electrical ratings of the mains power
installing it in the built-in structure due supply.
to safety manner. • Always use a correctly installed
• Follow the installation instructions shockproof socket.
supplied with the appliance. • Do not use multi-plug adapters and
• Always take care when moving the extension cables.
appliance as it is heavy. Always use • Make sure not to cause damage to
safety gloves and enclosed footwear. the mains plug and to the mains
• Do not install or use the appliance cable. Should the mains cable need to
where the temperature is less than be replaced, this must be carried out
0 °C. by our Authorised Service Centre.
• Install the appliance in a safe and • Connect the mains plug to the mains
suitable place that meets installation socket only at the end of the
requirements. installation. Make sure that there is
access to the mains plug after the
installation.ENGLISH 5
• Do not pull the mains cable to instructions on the detergent
disconnect the appliance. Always pull packaging.
the mains plug. • Do not drink and play with the water in
• This appliance is fitted with a 13 A the appliance.
mains plug. If it is necessary to • Do not remove the dishes from the
change the mains plug fuse, use only appliance until the programme is
a 13 A ASTA (BS 1362) fuse (UK and complete. Some detergent may
Ireland only). remain on the dishes.
• Do not store items or apply pressure
2.3 Water connection on the open door of the appliance.
• The appliance can release hot steam
• Do not cause damage to the water if you open the door while a
hoses. programme operates.
• Before connection to new pipes, pipes
not used for a long time, where repair 2.5 Service
work has been carried out or new
devices fitted (water meters, etc.), let • To repair the appliance contact the
the water flow until it is clean and Authorised Service Centre. Use
clear. original spare parts only.
• Ensure that there are no visible water • Please note that self-repair or non-
leaks during and after the first use of professional repair can have safety
the appliance. consequences and might void the
• Without electrical power, the water guarantee.
protection system is not active. In this • The following spare parts will be
case there is a risk of flooding. available for 7 years after the model
• The water inlet hose has a safety has been discontinued: motor,
valve and a sheath with an inner circulation and drain pump, heaters
mains cable. and heating elements, including heat
pumps, piping and related equipment
including hoses, valves, filters and
aquastops, structural and interior
parts related to door assemblies,
printed circuit boards, electronic
displays, pressure switches,
thermostats and sensors, software
and firmware including reset software.
Please note that some of these spare
parts are only available to
professional repairers, and that not all
WARNING! spare parts are relevant for all
Dangerous voltage. models.
• The following spare parts will be
• If the water inlet hose is damaged, available for 10 years after the model
immediately close the water tap and has been discontinued: door hinge
disconnect the mains plug from the and seals, other seals, spray arms,
mains socket. Contact the Authorised drain filters, interior racks and plastic
Service Centre to replace the water peripherals such as baskets and lids.
inlet hose.
2.6 Disposal
2.4 Use
• Do not put flammable products or WARNING!
items that are wet with flammable Risk of injury or suffocation.
products in, near or on the appliance.
• Disconnect the appliance from the
• Dishwasher detergents are
mains supply.
dangerous. Follow the safety
• Cut off the mains cable and discard it.6 www.electrolux.com
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
3. PRODUCT DESCRIPTION
The graphics below is just a
general product overview.
For more detailed
information, refer to other
chapters and/or documents
provided with the appliance.
1 2
11
10 9 8 7 6 5 4 3
1 Upper spray arms 7 Rinse aid dispenser
2 Lower spray arm 8 Detergent dispenser
3 Filters 9 Cutlery basket
4 Rating plate 10 Lower basket
5 Salt container 11 Upper basket
6 Air vent
3.1 Beam-on-Floor • When the appliance has a
malfunction, the red light flashes.
The Beam-on-Floor is a light that is
displayed on the floor below the The Beam-on-Floor is off
appliance door. when the appliance is
deactivated.
• When the programme starts, a red
light comes on and stays on for the
duration of the programme.
• When the programme is completed, a
green light comes on.ENGLISH 7
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle has ended,
check the control panel.
4. CONTROL PANEL
1 2 3 4 5 6
1 On/Off button 5 EXTRAS buttons
2 Delay Start button 6 AUTO Sense button
3 Display
4 MY TIME selection bar
4.1 Display 4.2 ECOMETER
A
The ECOMETER indicates how the
programme selection impacts energy
and water consumption. The more bars
are on, the lower the consumption is.
B C B indicates the most
environmentally friendly programme
A. ECOMETER selection for a normally soiled load.
B. Indicators
C. Time indicator
4.3 Indicators
Indicator Description
Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐
ing. Refer to "Before first use".
Salt indicator. It is on when the salt container needs refilling. Refer to
"Before first use".
Machine Care indicator. It is on when the appliance needs internal
cleaning with the Machine Care programme. Refer to "Care and
cleaning".8 www.electrolux.com
Indicator Description
Drying phase indicator. It is on when a programme with the drying
phase is selected. It flashes when the drying phase operates. Refer to
"Programme selection".
5. PROGRAMME SELECTION
5.1 MY TIME energy and water consumption for
crockery and cutlery with normal soil.
Using MY TIME selection bar, you can This is the standard programme for
select a suitable wash cycle based on
test institutes. 1)
programme duration, ranging from 30
minutes to four hours.
5.2 EXTRAS
You can adjust the programme selection
to your needs by activating EXTRAS.
ExtraPower
ExtraPower improves the washing
A B C D E results of the selected programme. The
option increases the wash temperature
A. • Quick is the shortest programme and duration.
(30min) suitable for washing a
load with fresh and light soil. GlassCare
• Pre-rinse (15min) is a
programme for rinsing off food GlassCare provides special care for a
remains from the dishes. It delicate load. The option prevents rapid
prevents odours forming in the changes in the wash temperature of the
appliance. Do not use detergent selected programme and reduces it to
with this programme. 45 °C. This protects glassware in
B. 1h is a programme suitable for particular from damaging.
washing a load with fresh and lightly
dried-on soil. 5.3 AUTO Sense
C. 1h 30min is a programme suitable
for washing and drying normally The AUTO Sense program automatically
soiled items. adjusts the wash cycle to the type of
D. 2h 40min is a programme suitable load.
for washing and drying heavily soiled The appliance senses the degree of soil
items. and the amount of dishes in the baskets.
E. ECO is the longest programme (4h) It adjusts the temperature and quantity of
offering the most efficient use of water as well as the wash duration.
1) This programme is used to assess compliance with the Ecodesign Comission Regulation
(EU) 2019/2022.ENGLISH 9
5.4 Programmes overview
Pro‐ Type of load Degree of Programme phases EXTRAS
gramme soil
Quick • Crockery • Fresh • Wash 50 °C • ExtraPower
• Cutlery • Intermediate rinse • GlassCare
• Final rinse 45 °C
• AirDry
• All types • All de‐ • Prewash EXTRAS are not
Pre-rinse of loads grees of applicable to this
soil programme.
1h • Crockery • Fresh • Wash 60 °C • ExtraPower
• Cutlery • Lightly • Intermediate rinse • GlassCare
dried-on • Final rinse 50 °C
• AirDry
1h 30min • Crockery • Normal • Wash 60 °C • ExtraPower
• Cutlery • Lightly • Intermediate rinse • GlassCare
• Pots dried-on • Final rinse 55 °C
• Pans • Drying
• AirDry
2h 40min • Crockery • Normal to • Prewash • ExtraPower
• Cutlery heavy • Wash 60 °C • GlassCare
• Pots • Dried-on • Intermediate rinse
• Pans • Final rinse 60 °C
• Drying
• AirDry
ECO • Crockery • Normal • Prewash • ExtraPower
• Cutlery • Lightly • Wash 50 °C • GlassCare
• Pots dried-on • Intermediate rinse
• Pans • Final rinse 55 °C
• Drying
• AirDry
AUTO • Crockery The pro‐ • Prewash EXTRAS are not
Sense • Cutlery gramme ad‐ • Wash 50 - 60 °C applicable to this
• Pots justs to all de‐ • Intermediate rinse programme.
• Pans grees of soil. • Final rinse 60 °C
• Drying
• AirDry
Machine • No load The pro‐ • Wash 70 °C EXTRAS are not
Care gramme • Intermediate rinse applicable to this
cleans the • Final rinse programme.
appliance in‐ • AirDry
terior.10 www.electrolux.com
Consumption values
Programme 1) Water (l) Energy (kWh) Duration (min)
Quick 9.3 -11.3 0.56 - 0.685 30
Pre-rinse 3.1 - 3.8 0.012 - 0.014 15
1h 9 - 11 0.693 - 0.847 60
1h 30min 9.3 - 11.4 0.772 - 0.944 90
2h 40min 9.4 - 11.5 0.876 - 1.071 160
ECO 9.9 0.6892)/0.7043) 240
AUTO Sense 8.3 - 11.5 0.677 - 1.036 120 - 170
Machine Care 8.3 - 10.1 0.593 - 0.725 60
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2) In accordance with the 1016/2010 regulation
3) In accordance with the 2019/2022 regulation
In your request please include the
Information for test institutes product number code (PNC) found on
To receive the necessary information for the rating plate.
conducting performance tests (e.g. For any other questions regarding your
according to EN60436), send an email dishwasher please refer to the service
to: book provided with your appliance.
info.test@dishwasher-production.com
6. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings Values Description1)
1 Water hard‐ From level 1L Adjust the level of the water softener ac‐
ness to level 10L cording to the water hardness in your
(default: 5L) area.
2 Rinse aid level From level 0A Adjust the level of the rinse aid accord‐
to level 8A (de‐ ing to the necessary dosage.
fault: 5A)
3 End sound On Activate or deactivate the acoustic signal
Off (default) for the end of a programme.
4 Auto door open On (default) Activate or deactivate the AirDry.
OffENGLISH 11
Number Settings Values Description1)
5 Key tones On (default) Activate or deactivate the sound of the
Off buttons when pressed.
6 Latest pro‐ On Enable or disable the automatic selec‐
gramme selec‐ Off (default) tion of the most recently used pro‐
tion gramme and options.
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in 6.1 The water softener
setting mode.
The water softener removes minerals
When the appliance is in setting mode, from the water supply, which would have
the bars of the ECOMETER represent a negative effect on the washing results
available settings. For each setting, a and on the appliance.
dedicated bar of the ECOMETER
flashes. The higher the content of these minerals,
the harder your water is. Water hardness
The order of the basic settings presented is measured in equivalent scales.
in the table is also the order of the
settings on the ECOMETER: The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
1 2 3 4 5 6
Water hardness
German de‐ French de‐ mmol/l Clarke de‐ Water softener
grees (°dH) grees (°fH) grees level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 212 www.electrolux.com
Regardless of the type of detergent in the same cycle or at the beginning of
used, set the proper water hardness the next programme. This activity
level to keep the salt refill indicator increases the total water consumption of
active. a programme by additional 4 litres and
the total energy consumption of a
Multi-tabs containing salt are programme by additional 2 Wh. The
not effective enough to rinsing of the softener ends with a
soften hard water. complete drain.
Regeneration process Each performed softener rinse (possible
more than one in the same cycle) may
For the correct water softener operation,
prolong the programme duration by
the resin of the softener device needs to
another 5 minutes when it occurs at any
be regenerated regularly. This process is
point at the beginning or in the middle of
automatic and is the part of the normal
a programme.
dishwasher operation.
When the prescribed quantity of water All the consumption values
(see values in the table) has been used mentioned in this section are
since the previous regeneration process, determined in accordance
a new regeneration process will be with the currently applicable
initiated between the final rinse and the standard in laboratory
programme end. conditions with water
hardness 2.5mmol/L
according to the 2019/2022
Water softener Amount of water
regulation (water softener:
level (l)
level 3).
1 250 The pressure and the
temperature of water as well
2 100 as the variations of the
mains supply can change
3 62
the values.
4 47
5 25
6.2 The rinse aid level
The rinse aid helps to dry the dishes
6 17 without streaks and stains. It is
7 10 automatically released during the hot
rinse phase. It is possible to set the
8 5 released quantity of rinse aid.
9 3 When rinse aid chamber is empty, the
rinse aid indicator is on notifying to refill
10 3 rinse aid. If the drying results are
satisfactory while using multi-tablets only,
In case of the high water softener setting, it is possible to deactivate the dispenser
it may occur also in the middle of the and the indicator. However, for best
programme, before the rinse (twice drying performance, always use rinse aid
during a programme). Regeneration and keep the rinse aid indicator active.
initiation has no impact on the cycle
duration, unless it occurs in the middle of To deactivate the rinse aid dispenser and
a programme or at the end of a indicator, set the level of rinse aid to 0A.
programme with a short drying phase. In
that cases, the regeneration prolongs the 6.3 End sound
total duration of a programme by
You can activate an acoustic signal that
additional 5 minutes.
sounds when the programme is
Subsequently, the rinsing of the water completed.
softener that lasts 5 minutes may beginENGLISH 13
Acoustic signals sound also 6.6 Latest programme selection
when a malfunction of the You can set the automatic selection of
appliance occurs. It is not the most recently used programme and
possible to deactivate these options.
signals.
The latest programme that was
completed before the appliance
6.4 AirDry deactivation is saved. It is then selected
AirDry improves the drying results. The automatically after you activate the
appliance door opens automatically appliance.
during the drying phase and remains When the latest programme selection is
ajar. disabled, the default programme is ECO.
6.7 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
AirDry is automatically activated with all
programmes other than Pre-rinse.
CAUTION! A B C
Do not try to close the
appliance door within 2 A. Previous button
minutes after automatic B. OK button
opening. This can cause C. Next button
damage to the appliance. Use Previous and Next to switch
between the basic settings and to
CAUTION! change their value.
If children have access to
the appliance, we advise to Use OK to enter the selected setting and
deactivate AirDry. The to confirm changing its value.
automatic opening of the
door may pose a danger.
How to enter setting mode
When AirDry opens the You can enter setting mode before
door, Beam-on-Floor might starting a programme. You cannot enter
not be completely visible. To setting mode while the programme is
see if the programme is running.
complete, look at the control
To enter setting mode, press and hold
panel.
simultaneously and for
about 3 seconds.
6.5 Key tones The lights related to the Previous, OK
The buttons on the control panel make a and Next are on.
click sound when you press them. You
can deactivate this sound.14 www.electrolux.com
• The current setting value flashes.
How to change a setting 3. Press Previous or Next to change
Make sure the appliance is in setting the value.
mode. 4. Press OK to confirm the setting.
• The new setting is saved.
1. Use Previous or Next to select the • The appliance returns to the basic
bar of the ECOMETER dedicated to settings list.
the desired setting. 5. Press and hold simultaneously
• The bar of the ECOMETER
dedicated to the chosen setting and for about 3
flashes. seconds to exit setting mode.
• The display shows the current The appliance returns to the programme
setting value. selection.
2. Press OK to enter the setting. The saved settings remain valid until you
• The bar of the ECOMETER change them again.
dedicated to the chosen setting is
on. The other bars are off.
7. BEFORE FIRST USE
1. Make sure that the current level of 2. Put 1 litre of water in the salt
the water softener agrees with the container (only for the first time).
hardness of the water supply. If 3. Fill the salt container with 1 kg of salt
not, adjust the level of the water (until it is full).
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start the programme Quick to
remove any residuals from the
manufacturing process. Do not use
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The 4. Carefully shake the funnel by its
washing phase starts only after this handle to get the last granules inside.
procedure is complete. The procedure is 5. Remove the salt around the opening
repeated periodically. of the salt container.
7.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in 6. Turn the cap of the salt container
the water softener and to assure good clockwise to close the salt container.
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.ENGLISH 15
CAUTION! CAUTION!
Water and salt can come out Only use rinse aid designed
of the salt container when specifically for dishwashers.
you fill it. After you fill the
salt container, immediately 1. Press the release element (A) to
start a programme to open the lid (B).
prevent corrosion. 2. Pour the rinse aid in the dispenser
(C) until the liquid reaches the
marking "FILL".
7.2 How to fill the rinse aid 3. Remove the spilled rinse aid with an
dispenser absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
B
C
A
8. DAILY USE
1. Open the water tap.
CAUTION!
2. Press and hold until the appliance Only use detergent designed
is activated. specifically for dishwashers.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is 1. Press the release button (B) to open
empty. the lid (C).
5. Load the baskets. 2. Put the detergent in the compartment
6. Add the detergent. (A). You can use detergent in tablets,
7. Select and start a programme. powder or gel.
8. Close the water tap when the 3. If the programme has a prewash
programme is complete. phase, put a small quantity of
8.1 Using the detergent detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
A 8.2 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
C programme.
B • The light related to the selected
programme is on.16 www.electrolux.com
• The ECOMETER indicates the
Activating options often
level of energy and water
increases the water and
consumption.
energy consumption as well
• The display shows the
as the programme duration.
programme duration.
2. Activate applicable EXTRAS if
desired. 8.5 How to start the AUTO
3. Close the appliance door to start the Sense program
programme.
1. Press .
8.3 How to select and start the • The light related to the button is
on.
programme Pre-rinse • The display shows the longest
possible program duration.
1. To select Pre-rinse, press and
hold for 3 seconds. MY TIME and EXTRAS are
• The light related to the button is not applicable to this
on. program.
• The ECOMETER is off. 2. Close the appliance door to start the
• The display shows the program.
programme duration. The appliance senses the type of load
2. Close the appliance door to start the and adjusts a suitable wash cycle.
programme. During the cycle, the sensors operate
several times and the initial program
8.4 How to activate EXTRAS duration can decrease.
1. Select a programme using MY TIME 8.6 How to delay the start of a
selection bar.
2. Press the button dedicated to the programme
option you want to activate. 1. Select a programme.
• The light related to the button is
2. Press repeatedly until the display
on.
shows the desired delay time (from 1
• The display shows the updated
to 24 hours).
programme duration.
The light related to the button is on.
• The ECOMETER indicates the
3. Close the appliance door to start the
updated level of energy and water
countdown.
consumption.
During the countdown, it is not possible
By default, options must be to change the delay time and the
activated every time before programme selection.
you start a programme.
When the countdown is complete, the
If the latest programme
programme starts.
selection is enabled, the
saved options are activated
automatically along with the 8.7 How to cancel the delay
programme. start while the countdown
operates
It is not possible to activate
or deactivate options while a
Press and hold for about 3 seconds.
programme is running.
The appliance returns to the programme
selection.
Not all options are
compatible with each other. If you cancel the delay start,
you have to select the
programme again.ENGLISH 17
8.8 How to cancel a running 8.10 The Auto Off function
programme This function saves energy by switching
the appliance off when it is not operating.
Press and hold for about 3 seconds.
The appliance returns to the programme The function comes into operation
selection. automatically:
• When the programme is completed.
Make sure that there is • After 5 minutes if a programme was
detergent in the detergent not started.
dispenser before you start a
new programme. 8.11 End of the programme
8.9 Opening the door while the When the programme is complete, the
display shows 0:00.
appliance operates
The Auto Off function switches the
Opening the door while a programme is appliance off automatically.
running stops the appliance. It may affect
the energy consumption and the All buttons are inactive except for the
programme duration. After closing the on/off button.
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry function.
9. HINTS AND TIPS
9.1 General • Soak or slightly scour cookware with
firmly cooked-on or baked-on food
Follow the hints below to ensure optimal before washing it in the appliance.
cleaning and drying results in daily use • Make sure that items in the baskets
and to protect the environment. do not touch or cover each other.
• Washing dishes in the dishwasher as Only then can the water completely
instructed in the user manual usually reach and wash the dishes.
consumes less water and energy than • You can use dishwasher detergent,
washing dishes by hand. rinse aid and salt separately or you
• Load the dishwasher to its full can use the multi-tablets (e.g. ''All in
capacity to save water and energy. 1''). Follow the instructions on the
For best cleaning results, arrange packaging.
items in the baskets as instructed in • Select a programme according to the
the user manual and do not overload type of load and the degree of soil.
the baskets. ECO offers the most efficient use of
• Do not pre-rinse dishes by hand. It water and energy consumption.
increases the water and energy • To prevent limescale buildup inside
consumption. When needed, select a the appliance:
programme with a prewash phase. – Refill the salt container whenever
• Remove larger residues of food from necessary.
the dishes and empty cups and – Use the recommended dosage of
glasses before putting them inside the the detergent and rinse aid.
appliance. – Make sure that the current level of
the water softener agrees with the
hardness of the water supply.18 www.electrolux.com
– Follow the instructions in the 4. When the programme is completed,
chapter "Care and cleaning". adjust the water softener according
to the water hardness in your area.
9.2 Using salt, rinse aid and 5. Adjust the released quantity of rinse
detergent aid.
• Only use salt, rinse aid and detergent 9.4 Before starting a
designed for dishwasher. Other programme
products can cause damage to the
appliance. Before you start the selected
• In areas with hard and very hard programme, make sure that:
water, we recommend to use basic
• The filters are clean and correctly
dishwasher detergent (powder, gel,
installed.
tablets containing no additional
• The cap of the salt container is tight.
agents), rinse aid and salt separately
• The spray arms are not clogged.
for optimal cleaning and drying
• There is enough salt and rinse aid
results.
(unless you use multi-tablets).
• Detergent tablets do not fully dissolve
• The arrangement of the items in the
with short programmes. To prevent
baskets is correct.
detergent residues on the tableware,
• The programme is suitable to the type
we recommend that you use tablets
of load and the degree of soil.
with long programmes.
• The correct quantity of detergent is
• Always use the correct quantity of
used.
detergent. Insufficient dosage of
detergent can result in poor cleaning
results and hard-water filming or
9.5 Loading the baskets
spotting on the items. Using too much • Always use the whole space of the
detergent with soft or softened water baskets.
results in detergent residues on the • Use the appliance to wash
dishes. Adjust the amount of dishwasher-safe items only.
detergent based on the water • Do not wash in the appliance items
hardness. Refer to the instructions on made of wood, horn, aluminium,
the detergent packaging. pewter and copper as they could
• Always use the correct quantity of crack, warp, get discoloured or pitted.
rinse aid. Insufficient dosage of rinse • Do not wash in the appliance items
aid decreases the drying results. that can absorb water (sponges,
Using too much rinse aid results in household cloths).
bluish layers on the items. • Put hollow items (cups, glasses and
• Make sure that the water softener pans) with the opening facing
level is correct. If the level is too high, downwards.
the increased quantity of salt in the • Make sure that glasses do not touch
water might result in rust on cutlery. each other.
• Put light items in the upper basket.
9.3 What to do if you want to Make sure that the items do not move
stop using multi-tablets freely.
• Put cutlery and small items in the
Before you start using separately cutlery basket.
detergent, salt and rinse aid, complete • Make sure that the spray arms can
the following steps: move freely before you start a
1. Set the highest level of the water programme.
softener.
2. Make sure that the salt and rinse aid 9.6 Unloading the baskets
containers are full. 1. Let the tableware cool down before
3. Start the Quick programme. Do not you remove it from the appliance. Hot
add detergent and do not put dishes items can be easily damaged.
in the baskets.ENGLISH 19
2. First remove items from the lower
After the programme is
basket, then from the upper basket.
completed, water can still
remain on the inside
surfaces of the appliance.
10. CARE AND CLEANING
When the programme is complete, the
WARNING!
Before any maintenance indicator is off.
other than running the
programme Machine Care, 10.2 Internal cleaning
deactivate the appliance and
• Carefully clean the appliance,
disconnect the mains plug
including the rubber gasket of the
from the main socket.
door, with a soft damp cloth.
• Do not use abrasive products,
Dirty filters and clogged
abrasive cleaning pads, sharp tools,
spray arms negatively affect
strong chemicals, scourer or solvents.
the washing results. Check
• To maintain the performance of your
these elements regularly
appliance, use a cleaning product
and, if necessary, clean
designed specifically for dishwashers
them.
at least once every two months.
Carefully follow the instructions on the
10.1 Machine Care packaging of the product.
Machine Care is a programme designed • For optimal cleaning results, start the
to clean the appliance interior with Machine Care programme.
optimal results. It removes limescale and
grease buildup. 10.3 Removal of foreign objects
When the appliance senses the need for Check the filters and the sump after each
use of the dishwasher. Foreign objects
cleaning, the indicator is on. Start the
(e.g. pieces of glass, plastic, bones or
Machine Care programme to clean the
toothpicks, etc) decrease the cleaning
appliance interior.
performance and can cause damage to
the drain pump.
How to start the Machine Care 1. Disassemble the filters system as
programme instructed in this chapter.
2. Remove any foreign objects by hand.
Before starting the Machine
Care programme, clean the
filters and spray arms. CAUTION!
If unable to remove the
1. Use a descaler or a cleaning product objects, contact an
designed specifically for Authorised Service
dishwashers. Follow the instructions Centre.
on the packaging. Do not put dishes 3. Reassemble the filters as instructed
in the baskets. in this chapter.
2. Press and hold simultaneously
and for about 3 seconds.
10.4 External cleaning
The indicators and flash. The • Clean the appliance with a moist soft
display shows the programme duration. cloth.
3. Close the appliance door to start the • Only use neutral detergents.
programme. • Do not use abrasive products,
abrasive cleaning pads or solvents.20 www.electrolux.com
10.5 Cleaning the filters
The filter system is made of 3 parts.
C
B
A 5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
1. Turn the filter (B) counterclockwise Make sure that it is correctly
and remove it. positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.ENGLISH 21
10.6 Cleaning the lower spray
arm
We recommend to clean the lower spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. To remove the lower spray arm, pull
it upwards.
10.7 Cleaning the upper spray
arms
We recommend to clean the upper spray
arms regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The upper spray arms are placed under
the upper basket. The spray arms (B) are
installed in the duct (A) with the
2. Wash the spray arm under running
mounting elements (C).
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. A
B
C
1. Pull out the upper basket.
2. To detach the spray arm, turn the
3. To install the spray arm back, press it mounting element clockwise.
downwards.22 www.electrolux.com
4. To install the spray arm back, insert
the mounting element in the spray
arm and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
11. TROUBLESHOOTING
to contact an Authorised Service
WARNING!
Centre.
Improper repair of the
appliance may pose a Refer to the below table for information
danger to the safety of the on possible problems.
user. Any repairs must be With some problems, the display shows
performed by qualified an alarm code.
personnel.
The majority of problems that may
occur can be solved without the need
Problem and alarm code Possible cause and solution
You cannot activate the • Make sure that the mains plug is connected to the
appliance. mains socket.
• Make sure that there is no damaged fuse in the fuse
box.ENGLISH 23
Problem and alarm code Possible cause and solution
The programme does not • Make sure that the appliance door is closed.
start. • If the delay start is set, cancel the setting or wait for
the end of the countdown.
• The appliance recharges the resin inside the water
softener. The duration of the procedure is approxi‐
mately 5 minutes.
The appliance does not fill • Make sure that the water tap is open.
with water. • Make sure that the pressure of the water supply is
The display shows i10 or not too low. For this information, contact your local
i11. water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clog‐
ged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not • Make sure that the sink spigot is not clogged.
drain the water. • Make sure that the interior filter system is not clog‐
The display shows i20. ged.
• Make sure that the drain hose has no kinks or bends.
The anti-flood device is on. • Close the water tap.
The display shows i30. • Make sure that the appliance is correctly installed.
• Make sure the baskets are loaded as instructed in
the user manual.
Malfunction of the water • Make sure that the filters are clean.
level detection sensor. • Switch the appliance off and on.
The display shows i41 -
i44.
Malfunction of the wash • Switch the appliance off and on.
pump or the drain pump.
The display shows i51 -
i59 or i5A - i5F.
The temperature of the wa‐ • Make sure that the temperature of the inlet water
ter inside the appliance is does not exceed 60°C.
too high or malfunction of • Switch the appliance off and on.
the temperature sensor oc‐
curred.
The display shows i61 or
i69.
Technical malfunction of • Switch the appliance off and on.
the appliance.
The display shows iC0 or
iC3.
The level of water inside • Switch the appliance off and on.
the appliance is too high. • Make sure that the filters are clean.
The display shows iF1. • Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation in‐
structions.24 www.electrolux.com
Problem and alarm code Possible cause and solution
The appliance stops and • It is normal. It provides optimal cleaning results and
starts more times during energy savings.
operation.
The programme lasts too • If the delay start option is set, cancel the delay set‐
long. ting or wait for the end of the countdown.
• Activating options can increase the programme dura‐
tion.
The remaining time in the • This is not a defect. The appliance is working cor‐
display increases and rectly.
skips nearly to the end of
the programme duration.
Small leak from the appli‐ • The appliance is not levelled. Loosen or tighten the
ance door. adjustable feet (if applicable).
• The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐ • The appliance is not levelled. Loosen or tighten the
cult to close. adjustable feet (if applicable).
• Parts of the tableware are protruding from the bas‐
kets.
Rattling or knocking • The tableware is not properly arranged in the bas‐
sounds from the inside of kets. Refer to basket loading leaflet.
the appliance. • Make sure that the spray arms can rotate freely.
The appliance trips the cir‐ • The amperage is insufficient to supply simultaneous‐
cuit-beaker. ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
• Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
Once you have checked the appliance, 11.1 The product number code
deactivate and activate the appliance. If
the problem occurs again, contact an
(PNC)
Authorised Service Centre. If you contact an Authorised Service
For alarm codes not described in the Centre, you need to provide the product
table, contact an Authorised Service number code of your appliance.
Centre. The PNC can be found on the rating
plate on the appliance door. You can
WARNING! also check the PNC on the control panel.
We do not recommend using
the appliance until the Before checking the PNC, make sure the
problem has been appliance is in the programme selection.
completely fixed. Unplug the
appliance and do not plug it 1. Press and hold simultaneously
in again until you are certain and for about 3 seconds.
that it operates correctly. The display shows the PNC of your
appliance.ENGLISH 25
2. To exit the PNC presentation, press The appliance returns to the programme
and hold simultaneously and selection.
for about 3 seconds.
11.2 The washing and drying results are not satisfactory
Problem Possible cause and solution
Poor washing results. • Refer to "Daily use", "Hints and tips" and the
basket loading leaflet.
• Use more intensive washing programme.
• Activate the ExtraPower option to improve the
washing results of a selected programme.
• Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results. • Tableware was left for too long inside the closed
appliance. Activate AirDry to set the automatic
opening of the door and to improve the drying per‐
formance.
• There is no rinse aid or the dosage of rinse aid is
not sufficient. Fill the rinse aid dispenser or set the
level of rinse aid to a higher level.
• The quality of the rinse aid can be the cause.
• We recommend to use rinse aid always, even in
combination with multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase.
Refer to "Programmes overview".
There are whitish streaks or • The released quantity of rinse aid is too high. Ad‐
bluish layers on glasses and just the rinse aid level to a lower level.
dishes. • The quantity of detergent is too high.
There are stains and dry wa‐ • The released quantity of rinse aid is not sufficient.
ter drops on glasses and Adjust the rinse aid level to a higher level.
dishes. • The quality of the rinse aid can be the cause.
The interior of the appliance • This is not a defect of the appliance. Humid air con‐
is wet. densates on the appliance walls.
Unusual foam during wash‐ • Use the detergent designed specifically for dish‐
ing. washers.
• There is a leak in the rinse aid dispenser. Contact
an Authorised Service Centre.
Traces of rust on cutlery. • There is too much salt in the water used for wash‐
ing. Refer to "The water softener".
• Silver and stainless steel cutlery were placed to‐
gether. Do not put silver and stainless steel items
close together.26 www.electrolux.com
Problem Possible cause and solution
There are residues of deter‐ • The detergent tablet was stuck in the dispenser
gent in the dispenser at the and therefore was not completely washed away by
end of the programme. water.
• Water cannot wash away the detergent from the
dispenser. Make sure that the spray arms are not
blocked or clogged.
• Make sure that items in the baskets do not impede
the lid of the detergent dispenser from opening.
Odours inside the appliance. • Refer to "Internal cleaning".
• Start the Machine Care programme with a descaler
or a cleaning product designed for dishwashers.
Limescale deposits on the • The level of salt is low, check the refill indicator.
tableware, on the tub and on • The cap of the salt container is loose.
the inside of the door. • Your tap water is hard. Refer to "The water soft‐
ener".
• Use salt and set regeneration of the water softener
even when multi-functional tablets are used. Refer
to "The water softener".
• Start the Machine Care programme with a descaler
designed for dishwashers.
• If limescale deposits still remain, clean the appli‐
ance with appliance cleaners which are particularly
suitable for this purpose.
• Try a different detergent.
• Contact the detergent manufacturer.
Dull, discoloured or chipped • Make sure that only dishwasher-safe items are
tableware. washed in the appliance.
• Load and unload the basket carefully. Refer to the
basket loading leaflet.
• Place delicate items in the upper basket.
• Activate the GlassCare option to ensure special
care for glassware and delicate items.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
12. TECHNICAL INFORMATION
Dimensions Width / height / depth 446 / 818 - 898 / 550
(mm)
Electrical connection 1) Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)ENGLISH 27
Water supply Cold water or hot water 2) max 60 °C
Capacity Place settings 9
Power consumption Left-on mode (W) 5.0
Off-mode (W) 0.50
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot
water supply to decrease energy consumption.
12.1 Link to the EU EPREL EPREL database using the link https://
eprel.ec.europa.eu and the model name
database and product number that you can find on
The QR code on the energy label the rating plate of the appliance. Refer to
supplied with the appliance provides a the chapter "Product description".
web link to the registration of this For more detailed information about the
appliance in the EU EPREL database. energy label, visit
Keep the energy label for reference www.theenergylabel.eu.
together with the user manual and all
other documents provided with this
appliance.
It is possible to find information related to
the performance of the product in the EU
13. CH GUARANTEE
Customer Service Centres
Point of Service
Industriestrasse 10 Le Trési 6 Via Violino 11
5506 Mägenwil 1028 Préverenges 6928 Manno
Morgenstrasse 131
3018 Bern
Langgasse 10
9008 St. Gallen
Am Mattenhof 4a/b
6010 Kriens
Schlossstrasse 1
4133 Pratteln
Comercialstrasse 19
7000 Chur
Spare parts service Industriestrasse 10, purchase or delivery to the consumer
5506 Mägenwil, Tel. 0848 848 111 (with a guarantee certificate, invoice or
sales receipt serving as proof). The
Specialist advice/Sale Badenerstrasse
guarantee covers the costs of materials,
587, 8048 Zürich, Tel. 044 405 81 11
labour and travel. The guarantee will
Warranty For each product we provide a lapse if the operating instructions and
two-year guarantee from the date of conditions of use are not adhered to, if28 www.electrolux.com
the product is incorrectly installed, or in third parties or the use of non-genuine
the event of damage caused by external components.
influences, force majeure, intervention by
14. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . For Switzerland:
Put the packaging in relevant containers Where should you take your
to recycle it. Help protect the old equipment?
environment and human health by Anywhere that sells new
recycling waste of electrical and equipment or hand it in to
electronic appliances. Do not dispose of official SENS collection
appliances marked with the symbol points or official SENS
with the household waste. Return the recycling firms.
product to your local recycling facility or The list of official SENS
contact your municipal office. collection points can be
found at www.erecycling.chDEUTSCH 29
INHALTSVERZEICHNIS
1. SICHERHEITSHINWEISE................................................................................30
2. SICHERHEITSANWEISUNGEN...................................................................... 32
3. GERÄTEBESCHREIBUNG.............................................................................. 34
4. BEDIENFELD................................................................................................... 35
5. PROGRAMMWAHL..........................................................................................36
6. GRUNDEINSTELLUNGEN ..............................................................................39
7. VOR DER ERSTEN INBETRIEBNAHME.........................................................43
8. TÄGLICHER GEBRAUCH................................................................................44
9. TIPPS UND HINWEISE....................................................................................46
10. REINIGUNG UND PFLEGE........................................................................... 48
11. STÖRUNGSSUCHE.......................................................................................52
12. TECHNISCHE DATEN................................................................................... 57
13. GARANTIE..................................................................................................... 57
WIR DENKEN AN SIE
Vielen Dank, dass Sie sich für ein Gerät von Electrolux entschieden haben. Sie
haben ein Produkt gewählt, hinter dem jahrzehntelange professionelle Erfahrung
und Innovation stehen. Bei der Entwicklung dieses großartigen und eleganten
Geräts haben wir an Sie gedacht. So haben Sie bei jedem Gebrauch die
Gewissheit, dass Sie stets großartige Ergebnisse erzielen werden.
Willkommen bei Electrolux.
Besuchen Sie uns auf unserer Website, um:
Anwendungshinweise, Prospekte, Fehlerbehebungs-, Service- und Reparatur-
Informationen zu erhalten:
www.electrolux.com/support
Ihr erworbenes Produkt zu registrieren, um den besten Service für es zu
gewährleisten:
www.registerelectrolux.com
Zubehör, Verbrauchsmaterial und Original-Ersatzteile für Ihr Gerät zu
erwerben:
www.electrolux.com/shop
REPARATUR- UND KUNDENDIENST
Verwenden Sie ausschließlich Original-Ersatzteile.
Halten Sie folgende Angaben bereit, wenn Sie sich an den Kundendienst
wenden: Modell, Produktnummer (PNC), Seriennummer.
Diese Informationen finden Sie auf dem Typenschild.
Warnungs-/Sicherheitshinweise
Allgemeine Informationen und Empfehlungen
Informationen zum Umweltschutz
Änderungen vorbehalten.30 www.electrolux.com
1. SICHERHEITSHINWEISE
Lesen Sie vor der Montage und dem Gebrauch des
Geräts zuerst die Bedienungsanleitung. Bei
Verletzungen oder Schäden infolge nicht
ordnungsgemäßer Montage oder Verwendung
übernimmt der Hersteller keine Haftung. Bewahren Sie
die Anleitung zum Nachschlagen an einem sicheren und
zugänglichen Ort auf.
1.1 Sicherheit von Kindern und schutzbedürftigen
Personen
• Das Gerät kann von Kindern ab 8 Jahren und
Personen mit eingeschränkten physischen,
sensorischen oder geistigen Fähigkeiten oder mit
mangelnder Erfahrung und/oder mangelndem Wissen
nur dann verwendet werden, wenn sie durch eine für
ihre Sicherheit zuständige Person beaufsichtigt
werden oder in die sichere Verwendung des Geräts
eingewiesen wurden und die mit dem Gerät
verbundenen Gefahren verstanden haben.
• Kinder zwischen 3 und 8 Jahren und Personen mit
schweren Behinderungen oder Mehrfachbehinderung
müssen vom Gerät ferngehalten werden, wenn sie
nicht ständig beaufsichtigt werden.
• Halten Sie Kinder unter 3 Jahren vom Gerät fern,
wenn sie nicht ständig beaufsichtigt werden.
• Kinder dürfen nicht mit dem Gerät spielen.
• Halten Sie alle Wasch- und Reinigungsmittel von
Kindern fern.
• Halten Sie Kinder und Haustiere vom geöffneten
Gerät fern.
• Kinder dürfen keine Reinigung und Wartung ohne
Beaufsichtigung durchführen.
1.2 Allgemeine Sicherheit
• Dieses Gerät ist für die Verwendung im Haushalt und
ähnliche Zwecke vorgesehen, wie z. B.:DEUTSCH 31
– Bauernhöfe, Personalküchenbereiche in
Geschäften, Büros und anderen Arbeitsumfeldern.
– Für Gäste in Hotels, Motels, Pensionen und
anderen wohnungsähnlichen Räumlichkeiten.
• Nehmen Sie keine technischen Änderungen am Gerät
vor.
• Der Betriebswasserdruck (Mindest- und Höchstdruck)
muss zwischen 0.5 (0.05) / 8 (0.8) bar (MPa) liegen
• Beachten Sie, dass die Höchstzahl an Maßgedecken
9 beträgt.
• Wenn das Netzkabel beschädigt ist, muss es vom
Hersteller, seinem autorisierten Kundenservice oder
einer gleichermaßen qualifizierten Person
ausgetauscht werden, um Gefahrenquellen zu
vermeiden.
• Stellen Sie Besteck mit scharfen Spitzen mit der
Spitze nach unten in den Besteckkorb oder legen Sie
es in die Besteckschublade mit den scharfen Kanten
nach unten.
• Lassen Sie das Gerät bei geöffneter Tür nicht
unbeaufsichtigt, damit sie nicht versehentlich auf sie
treten.
• Schalten Sie das Gerät immer aus und ziehen Sie den
Netzstecker aus der Steckdose, bevor
Reinigungsarbeiten durchgeführt werden.
• Reinigen Sie das Gerät nicht mit einem Wasser- und/
oder Dampfstrahl.
• Besitzt das Gerät Lüftungsschlitze im Boden, dürfen
diese zum Beispiel nicht von einem Bodenbelag
blockiert werden.
• Das Gerät muss mit den mitgelieferten neuen
Schläuchen an die Wasserversorgung angeschlossen
werden. Alte Schläuche dürfen nicht wiederverwendet
werden.You can also read
