Currents Price List October 2021 - Knoll
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Currents Price List October 2021
Table of Contents Currents
Introduction Knoll and Sustainable Design 2
Introduction to Currents 3
Currents Textiles 5
Currents Color Program 6
Currents Legacy Finishes 7
Introduction to Upstart 8
Original Upstart Planning Examples 9
Upstart Color Program 11
Upstart Legacy Finishes 12
Service Walls and components Service Wall frames 13
Fence frames 14
Crown and raceway covers 15
Structural base cover kits 16
Access covers 18
Wall ends and connectors 25
Wall frame accessories 31
Spine ends and connectors 33
End Starters 35
Panel system starters and T-ends 36
Panel system starters for Dividends Horizon 40
Power, data and communications components for Service Walls 41
Screens and add-up panels Mobile screens 49
Add-up panels 50
Add up glass panels, for spine 51
Worksurfaces Worksurfaces, universal 52
Currents Stiffeners 58
Cascade edge worksurfaces 59
Worksurface, samples 65
Worksurface supports 66
Floorstanding storage Pedestal accessories 67
Counter Surface Counter surface 69
Upstart table desks and storage Upstart Tables 70
Plannable Upstart Tables 75
Accessories 84
Upstart Privacy Screens 85
Wall Mounting of Knoll Products 86
Alpha-Numeric Index 88
Selling Policy 91
KnollKey Lock Program 94
General Ordering Information 95
Copyright Q 2021 Knoll, Inc.
All rights reserved.
All prices effective 10/15/2021. 1 PLCURR1121Knoll and Sustainable Design
Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports material
health product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our North
American facilities.)
Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.
Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation for
industry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.
Knoll certifications include: Forest Stewardship Council (FSCt), Intertek’s Clean Air Program, Business and Institutional Furniture
Manufacturer’s Association (BIFMA) LEVELt certification, International Living Future Institute’s (ILFI) Declare labelling and Certified
Environmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizations
achieve credits for Leadership in Energy and Environmental Design (LEEDt), WELL and the Living Building Challenge (LBC) building
certifications.
In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO
14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-term
strategy to further reduce energy consumption and lower our carbon footprint.
We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s Full
Circle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options for
repurposing or recycling that mitigate landfill impact through energy-from-waste conversion.
For more information about Knoll and sustainable design, visit www.knoll.com/environment.
2Introduction to Currents Currents
Currents creates dynamic, advanced
performance work environments from
coordinated, independent elements –
Service Walls, Fence frames, plannable
desks, mobile storage – and existing
Knoll office products.
Currents workspaces may be
spine-supported or freestanding, or
planned in combination with
conventional panel systems.
3Introduction to Currents Currents
$Qe8Wl5QLUQN8N_^l0W8l^U85FA86l &8WdF58l,1JJ^l50N_FJ8d8Wl
bWW8N_^l&8WdF58l,1JJ^lCWLl_E8l ^8U0W0_8Jg l NQJJlbNFd8W^0JllQWl -QWI^b\058l^bUUQW_^l0N6l^g^_8L^l eQWI^b\058^lbUl_QllQWlUWQdF68l
^_Wb5_bW0Jl5QW8l0N6lUWFL0WglU0_ElQ9l lUQe8Wl5QLUQN8N_^lL0gl48l U0N8J^lL0gl48l5QNN85_86l_Ql_E8l 8N6l^bUUQWalCurrents Textiles Currents
KnollTextiles
Approved for Wall covers, Additional textiles are Dapper Melange Tempest
mobile screens and available on linkable screens Delite Melody j fr Texnet
privacy screens and stackable add-up Demure Menagerie Theory j fr
panels: see Morrison price Diva Meroe Tight Rope j fr
Fabric Group10 list for approved fabrics. Djenne Midpoint Tilden j fr
Annex (W1360) Double Agent jfr Milestone Tinge j fr
Beacon (W1597) Customer’s Own Material is Dristi jfr Mod Plaid Topography
Broadcloth II (W1619) subject to an application Dune Monarch f Topos
Circuit (W1754) testing fee of $750 per fabric Durand Moto CR Totem
Element (W1077) and a $2500 fee for UL Dynamic Nature Walk Tower Grid
Messa (W20611) testing. Fabric requirements Earthwork f Night Life Treble CR
Pivot (W1926) - application test, 10 yards; Eclat Weave Noble Trophy
Symbolic Details (W693) UL test, 15 yards. COM is Entouragef North Island Tryst
Skylark (W1718) also subject to extended Entwine Obi Ultrasuede f
Tailor Made II (W1610) leadtimes. COM panels are Essence Off the Grid Utmost II
Twister (W1923) priced at Group 10 plus cost Fancy Twill Origins Utopia
Versatility (W432) of fabric. Ferry Palisade Utrillo
Fabric Group 20 Approved textiles for Fibra Panache CR Vatera
Circle Line (W1146) Currents Mobile Pedestal Firefly Paradigm Venue
Criss Cross (W305) Cushion Forza j fr Pedal Pusher j fr Versa f
Delite (K2026) Fox Trot CR Petite Floral Versatility
Edo (W2111) Abacus f Framework f Pogo f Vibe II j fr
Infinite (K2263) Aegean Galla II f Prairie j fr Vice Versa
Logic (W1318) Alignment f Gibson Prepf Vinyl j fr
Mainframe (W1783) Arno f Glider Presto f Westwood
Nematic II (W1620) Aswan Grande Prim f Whip
Photon II (W1695) Atelier Grandview Quark Wit
Ponder (W2382) Atlas Greenwich Radiance Woodland II
Reflect (W884) Attire Haze Ransom f Yeni
Axiom j fr Heavy Metal Rattan Zari CR
Fabric Group 30 Backdrop Helios Reflect Zipline f
Match Point (W1145) Bank Shot f Highland Regard CR Zoom
Micro (W465) Baxter Holbrook Retreat
Relay (W1020) * Beacon Hologram Ricochet f Pedestal cushions are
Belize Hourglass Rio upholstered (from the front to
Fabric Group 40 Biota f the back of the pedestal)
Hudson Rivington
Amplify (W1215) Biscayne with the fabric direction
Icon Roam
Bandwidth (W1219) Bistro f matching the textile sample.
Ikat Stripe Roundtrip f
Crossroad (K2085) Bocce f In Step Rush Hour Approved Spinneybeck
Hourglass (K1523) Boundary f Innuendo Sahara CR Leathers for Currents
Palladium (W1030) Buzz Intrigue Sandpiper CR Mobile Pedestal Cushions
Spellbound (W1464) Cairo Island Sequin CR
Fabric Group 50 Cameo Jasmine Serendipity Alaska
Presto (K1000) Cato Journeyf Shadow Play Amazon
Century Kampala Sherman Andes
Fabric Group 55 Chameleon Katazome Sinclair Arizona
Ransom (K1298) Chance Keaton Smart j fr Cervo
Ransom (K2398) Charm Kimono Soireef Copenhagen
Chiseled Kingston Soliloquy Cordovan
*Screen only
Chroma f Knoll Felt f Sonnet f Derby
Textile and leather grades Chronicle f Knoll Hopsack f Soon Distressed
are found in the Office Circa Kora CR Spark f Ducale
Seating Textile Matrix and Classic Boucle f Lagos Spencer Ducale Velours
Office Seating Leather Close Knit Legend CR Spree f España
Matrix. Common Ground f Liberty Stacks Maremma
Commuter Cloth f Limani Star Struck Marissa
Compass CR Looped In Stepping Stones Prima
Comaro Lore CR Striae Stripe Riva
Coterie Ludlow Stripe It Sabrina
Cozy Cord Lyric Summit Saddle
Cross Tech Magnolia Suttonf Salon
Crossroad Mariner Swing Velluto Pelle
Cuddle Stripe Marquee Synth f Volo
Dahlia CR Masquerade Tabloid f
f = CAL 133 Pre-approved j
fr Fire Retardants Chemicals
5Currents Color Program Currents
Currents Finishes
%(0 $ * *0
3jKG]MhmKRe]xYKxOim@bbeKG}xzhcKmx
""0
$*0
+( #0 *+!*0
( +*0 %( ,(($+*00 $0
$0 *,)*0 .%( *,(0 ,+(0
""0 %,+( +%( 0 +%( 0 $0 0 -(
%(0 /0 %-(*0 (*0 (%$+*0 **0 * "-*0 *00 0
L[WL+[y{+L{Ca[H 0
vWZ{Currents Legacy Finishes Upstart
NJ[Ic0I.c,<c
,JII0,UJNTc&I.c UN&@;>UcD0;Tc
,JII0,UJNcUJLc,<c D0;Tc,JNI0Nc
!'ED &I.c N&,0[&_c,JZ0NTc D0;Tc.0TBcT,N00Ic
UNW,UWN&Ec [JNBcTWQ&,0c ,D&GLTc
"JNB &T0c NJ[Ic *N&,B0UTc&I.c [@I.J[c9&G0Tc UJN&;0c UJN&;0c
TWS&,0Tc ,JZ0NTc JZ0NTc JWUN@;;0NTc U0^UWN0.cJID_c 4PJIUTc &T0Tc
D&TU@,c&G@I&U0Tc @;>UcN0_c c
WG@,0c c
"@IU0Nc=0_c
D&U0c
IJ[c c
JDBTUJI0cN0_c
0&N]JJ.c c
@*0Nc
&I.c c
0.@WGcN0_c c
J2Uc;N0_c c
#JJ.cN&@Ic D0&Nc&LD0c c
X&G@I&U0Tc
0I00NcNJWLc c &LD0c
G0N@,&Ic,>0NN_c
0.@WGcN0.cG&>J;&I_c
&@IUcNJWLc c 0U&DD@,cD@IUcc c c c c c c
@;>UcG0U&DD@,c;N0_cc
0.@WGcG0U&DE@,c=0_cc
&NBcG0U)D@,c;N0_cc
@;>UcG0U&DD@,cU&Icc
0U&DE@,c*0@;0cc
J2UcN0_c
0.@WGcN0_cD&U0c % c % c % c
&WL0c
DWG@IWGc c
&@IUcNJWLc c @DZ0Nc c c c c c c
">@U0c c c c c
M0-A3`cF0Introduction to Upstart Upstart
Limited Availability
4511F 7Original Upstart Planning Examples Upstart
Limited Availability
Basic stand-alone Y desk Oval table with Y desk
Curved wiper with Y desk
• the core Upstart application • 369 x 669 oval table • wiper 669 W
• 309 x 729 nominal shown; • 309 x 729 Y return • 309 x 729 Y return
conference depth is
approximately 369
Y desk with 42( round table
• conference table Rectangular table with
Y and M back-to-back, with
bracketed return surface
42( conference tables
• 729 x 769 approximate
footprint
• optional work shelf
Y desk with tripod table
• 309 x 729 Y desk, work shelf,
and mobile pedestal
Dual-monitor M desk
workstation
• 729 x 1009 approximate
footprint
• optional work shelf
• flat ends allow placement
along wall
Dual-monitor M desk with tripod table
• 309 x 729 nominal M desk
Y desks back-to-back, with
half-round shared table
• please note 1.759 setback
from the back edge of
each top to module line,
same as Currents desks.
9Original Upstart Planning Examples Upstart
Limited Availability
Y desk with Upstart storage
Extended corner desk and tower
• 729 x 969 footprint • 729 x 729 footprint
• 729 table with screen • 489 and 729 screens
• mobile pedestal and tower • mobile pedestal and tower
Extended corner desk and adjacent worktable Upstart 120& planning
• 729 x 969 footprint • group of three 120° corners
• 729 x 489 corner and 489 straight desks • 489 shared privacy screens
• mobile pedestal and privacy screen • mobile pedestals
U-shape plannable desks
• 969 x 969 footprint
• two 489 x 729 extended corners
Upstart work group
• mobile pedestal and tower • 120° corners and shared worktable 48 x 249
• 729 privacy screen • mobile pedestals and towers
• 489 privacy screens
10Upstart Color Program Upstart
Upstart Finishes
Limited Availability
Core finishes
Specify Core finishes for all new customers
Table legs, Plannable
screen Plannable Upstart Upstart
brackets, Upstart Upstart Worksurface Worksurface
Core Legacy magnet rail Worksurfaces Worksurfaces edges edges
611 Beige Mist Metallic •
118 Bright White • • • • •
112 Brown •
123 Brushed Grey • •
122 Brushed Sand • •
113 Dark Grey Y3 •
128 Fog • • • •
114 Folkstone Grey LA/U • • • • •
111 Jet Black • • • • •
124 Medium Cherry • •
115 Medium Grey Y2 •
612 Medium Metallic Grey J •
121 Micro Grey • •
129 Micro Sand • •
126 Natural Cherry • •
125 Natural Maple • •
119 Pumice F • • • •
116 Sandstone •
613 Silver 3 •
117 Soft Grey E/M42 • • • • •
813 Trim grey 5 • •
127 Walnut • •
Frosty white W •
Light grey (integral) U
Glider grey (integral) G1
638 Blond Maple 4/M •
639 Light Cherry 6/R •
006 Maple K
Default trim information:
Trim Grey is the integral color for caster and glide leg levellers and screen corners
Black: flat bracket, cable tray and casters
Screen available in Ribbed Polycarbonate or Marker surface
Veneer finishes for Plannable Upstart worksurfaces are available through Custom Product Development.
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.
Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
Wood Finishes
New codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options
and gloss levels.
Gloss Level Fill Level Edge Options for Veneers
A Low Gloss Closed Pore WOOD Complemetary
B MediumGloss Closed Pore SYN Wood Complementary Synthetic
C High Gloss Closed Pore WPLY Wood Ply Edge *
SPLY Synthetic Ply Edge *
D Low Gloss Open Pore
E Medium Gloss Open Pore * Ply Edge available on Birch (037) worksurfaces.
F High Gloss Open Pore
11Upstart Legacy Finishes Upstart
Limited Availability
Specify Legacy Finishes for existing customers only. Legacy Finishes are not available for new customers.
Table legs, screen brackets,
magnet rail Worksurfaces Worksurface edges
B Snow •
L Light grey • •
E Fiber •
V Winter grey •
S Slate •
F Pumice • •
U Folkstone grey • •
M42 Soft grey • •
D Sand • •
CM Clear Maple •
PA Pearwood •
WM Warm Cherry •
5 Trim grey •
N Black •
W Frosty white •
N2 Flint
NU Light grey
NJ Medium grey
NV Dark grey
NW Light Tan
NH Beige
3 Silver •
B White •
2 Metallic flint •
U Light metallic grey •
J Medium metallic grey •
V Dark metallic grey •
H Metallic beige •
W Light metallic tan •
E Soft grey •
K Maple
U Light grey (integral)
G1 Glider grey (integral)
Default trim information:
Trim Grey is the integral color for caster and glide leg levellers and screen corners
Black: flat bracket, cable tray and casters
Screen available in Ribbed Polycarbonate or Marker surface
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.
Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
NOTE: Add 10% to the list price of any laminate product when specifying a legacy laminate.
12Service Wall frames Currents
Service Walls and components
description type w d h pattern no. black
Wall frame, standard crown 399H 489 59 439 APF1 3948 $751.
609 59 439 APF1 3960 862.
729 59 439 APF1 3972 1,067.
489H 489 59 529 APF1 4848 825.
609 59 529 APF1 4860 946.
729 59 529 APF1 4872 1,179.
649H 489 59 689 APF1 6448 981.
609 59 689 APF1 6460 1,123.
729 59 689 APF1 6472 1,405.
Wall frame, compact crown 399H 489 59 409 APFA1 3948 602.
609 59 409 APFA1 3960 690.
729 59 409 APFA1 3972 851.
489H 489 59 499 APFA1 4848 658.
609 59 499 APFA1 4860 754.
729 59 499 APFA1 4872 941.
649H 489 59 659 APFA1 6448 784.
609 59 659 APFA1 6460 898.
729 59 659 APFA1 6472 1,123.
Order Code Specification Information Application Notes
Example: APF1 4860 Wall frame pattern numbers begin Service Wall frames are the Crown is bored to accept stackable
APF1 Wall frame with APF prefix. structural component of a Currents add-up panels at 39 increments.
spine. Specify frames in any
48 Height Specify: combination of widths to create the Wall frames include two levelling
60 Width Fifth position: height overall wall length required. feet with 29 travel, 129 from each
39 399H side edge.
48 489H Frames include vertical studs every
129 on center, with cover mounting The base of the wall accepts Knoll 2
64 649H + 2 or 3 + 3 raceway power rails,
clips and cable manager inserts on
both sides. Frames also include 49H and allows cables to enter or exit
Seventh position: width anywhere between glides.
or 19 top crown with continuous
48 489W channel for add-up panels. 49H
60 609W Specify crown covers, raceway
Standard crown frames include covers, structural base covers, and
72 729W shaped crowns for upmounting wall covers for each face of frame,
shelves and overhead storage and specify power components
All wall frames include two 39 cabinets or canopy lighting at any
diameter, 29 levelling glides and one separately.
point. Compact crown frames
set of connectors to adjacent frame feature a slim profile crown with
or wall connector. Frames are black downmounting capability only.
painted finish.
13Fence frames Currents
description width depth height pattern number black
1
Fence frames (legs not included) 489 59 20 /29 APF 1848 $686.
609 59 20 1/29 APF 1860 823.
729 59 20 1/29 APF 1872 987.
Leg with glide 2 3/49 49 18 1/29 AX1LEG ( ) 105.
2 3/49 49 59 AX1LEG5 ( ) 105.
2 3/49 49 69 AX1LEG6 ( ) 105.
Stabilizer feet (set of 2) 2 1/29 7 1/29 4 1/29 AX1 FF ( ) 164.
Order Code Specification Information Application Notes
Example: APF 1872 Specify painted finishes for legs and Currents Fence provides Legs with feet 129 from each end of
APF Wall frame feet. independent services distribution to connected Fence frames can be
a cluster of tables, desks or replaced by stabilizer end cabinets
18 Height Fence frames include four barrel workstations. or T-ends with panels. Intermediate
72 Width connectors, crown and bottom rail support may also be provided by
covers in trim grey. Frames must be Fence legs may be specified at three legs without feet in combination
enclosed with two rows of 99H heights to deliver an overall height with perpendicular panels.
Currents or AutoStrada wall covers of 409H, 289H or 279H to the top of
on each face. the crown. Specify AX1LEG( ) leg to Fence frames can end support
get to 409H; specify AX1LEG6( ) worksurfaces but cannot cantilever
Specify Currents power components leg to get to 289H; and specify worksurfaces or upmounted storage.
separately. Outlet modules mount at AX1LEG5( ) leg to get to 279H to
any point along the top row only. the top of the crown. When specifying frameless glass
add-up panels on Fence, each
Cable tray access covers mount in Installed Fence frames include Fence frame requires two legs.
bottom row only. vertical studs with cover mounting
clips and cable manager inserts Fence T-end adaptors, stabilizer end
every 129. cabinet adaptors, high-low straight
connectors and unversal panel
A continuous top channel accepts starters are only compatible with
Currents or AutoStrada crown top Fence frames that are specified at
caps and supports frameless glass 40 inch high with the 18- 1/29 high
add up panels, add up panels or leg (AX1 LEG). To use these
stackable add up panels 129 high. components when Fence is planned
219H stackable add up panels may with shorter legs that deliver overall
be used on Fence runs supported by heights of 27 or 28 inches high,
perpendicular panels. please contact Knoll Custom
Product Development for assistance.
Fence legs with glides mount 129
from each frame side edge under the
first full vertical stud. Stabilizer feet
mount on both faces of Fence legs.
For freestanding Fence runs, specify
a leg with feet 129 from each run
end plus a leg with feet for each
intermediate frame connection.
Intermediate legs may be positioned
on either side of the frame
connection.
14Crown and raceway covers Currents
Service Walls and components
description type w d h pattern no. paint metal finish (A) list
Crown covers (pair) 489 59 49 APT 48 ( ) $52. $62.
609 59 49 APT 60 ( ) 62. 69.
729 59 49 APT 72 ( ) 69. 89.
Crown covers, compact (pair) 489 59 19 APTA 48 ( ) 85.
integral color 609 59 19 APTA 60 ( ) 99.
729 59 19 APTA 72 ( ) 170.
Raceway covers (pair) no outlets 489 – 3 1/39 APR 480 ( ) 52.
609 – 3 1/39 APR 600 ( ) 62.
729 – 3 1/39 APR 720 ( ) 69.
outlets 489 – 3 1/39 APR 48 ( )( ) 62.
609 – 3 1/39 APR 60 ( )( ) 69.
729 – 3 1/39 APR 72 ( )( ) 89.
Crown top cap 249 29 – APT C24 ( ) 11.
249 29 – APT1 C24 ( ) 11.
369 29 – APT C36 ( ) 22.
369 29 – APT1 C36 ( ) 22.
489 29 – APT C48 ( ) 40.
489 29 – APT1 C48 ( ) 40.
609 29 – APT C60 ( ) 44.
609 29 – APT1 C60 ( ) 44.
729 29 – APT C72 ( ) 52.
729 29 – APT1 C72 ( ) 52.
integral color only, plastic
Order Code Specification Information Application Notes
Example: APR 480 612 Wall crown pattern numbers begin Specify trim grey or easy grey Crown, raceway, and structural base
APR Raceway with APT-prefix, then frame width. integral color for compact crown covers are required for every wall
covers and crown top cap. frame in corresponding widths.
48 Width Specify: Covers are specified in pairs to
0 Outlet openings Sixth position: paint or metal finish cover both sides of a frame.
Crown top caps are optional fillers
612 Finish Raceway Covers begin with APR- for the crown where no add-up Raceway covers may be specified
prefix, then frame width. panels are planned. with no openings (desk-height
Specify: raceway), two openings in the
Crown top caps with prefix APT1 center, or four outlets at all possible
Sixth position: outlet openings are slightly taller than crown top locations in 489 or 609W raceway.
0 no outlets caps with prefix APT to better line 729W raceway may have four outlet
2 two outlets, each side (489, up with frameless glass add-up openings in the center or six in all,
609 only) panels. each side.
4 four outlets, each side
6 six outlets (729only), each Raceway cover sets with outlet
side openings include black filler plates
for one cover only.
Seventh position:
Raceway cover finish
15Structural base cover kits Currents
non-upholstered
smooth textured textured
description type w d h pattern no. solid solid perforated perforated
Structural base covers (pair) non upholstered 489 19 169 APC AZ48 ( )( ) $356. $395. $506. $555.
609 19 169 APC AZ60 ( )( ) 409. 455. 578. 641.
729 19 169 APC AZ72 ( )( ) 465. 514. 654. 719.
Order Code Specification Information Application Notes
Example: APC AZ48 H 612 Structural base cover kit pattern Specify paint finish for all covers. Crown, raceway, and structural base
APC Wall cover numbers begin with APC AZ prefix, covers are required for every wall
then cover width. Textured paint finishes for structural frame in corresponding widths.
AZ Attachment zone base covers only. Covers are specified in pairs to
48 Width Specify: cover both sides of a frame.
Eighth position:
H Perforated Structural base covers bolt to each
P painted
612 Finish PT textured painted side of the wall frame up to 219H for
H perforated painted structure and continuous
HT textured perforated painted attachment capability.
Ninth position: paint finish or fabric
group
16Structural base cover kits Currents
Service Walls and components
upholstered
description type w d h pattern no. 10 15 20 30 35 40 45 50 55
Structural base covers (pair) upholstered 489 19 169 APC AZ48 F ( ) $512. $533. $550. $588. $604. $626. $644. $676. $717.
609 19 169 APC AZ60 F ( ) 604. 626. 646. 690. 715. 731. 757. 794. 845.
729 19 169 APC AZ72 F ( ) n/a 717. n/a n/a n/a n/a n/a n/a n/a
Order Code Specification Information Application Notes
Example: APC AZ48 F 10 Structural base cover kit pattern Crown, raceway, and structural base
APC Wall cover numbers begin with APC AZ prefix, covers are required for every wall
then cover width. frame in corresponding widths.
AZ Attachment zone Covers are specified in pairs to
48 Width Specify: cover both sides of a frame.
Eighth position:
F Upholstered Structural base covers bolt to each
F fabric
10 Fabric side of the wall frame up to 219H for
Ninth position: paint finish or fabric structure and continuous
group attachment capability.
When ordering 609 wide or greater
Fabric groups: width upholstered structural base
Specify two-digit fabric group covers, please check the width of
number the fabric selected.
17Access covers Currents
outlets cover
description type w d h pattern no. black no finish smooth
Outlets cover 99H cover 129 19 99 APC OC ( ) $44.
Hinged outlet flap (each) APC OCF 44.
Outlet fillers (Set of 10) AR OF 50.
Hardwire outlets cover 129 99 APC HOC ( ) 67.
Hardwire outlet box, desk height quad 29 AR1 HOB 306.
two quad 129 AR1 HOB2 403.
Order Code Specification Information Application Notes
Example: APC OC 612 Specify finish. Locate outlets covers on Service Hardwire outlet box accepts two
APC Service wall cover Wall or Fence frames before Decora-style duplex outlets, and
specifying other wall covers. includes mounting brackets for one
OC Outlets cover face of Service Wall between 219
612 Finish Outlets cover mounts between 219 and 489H or one face of top row of
and 309 (below standard desk Fence frames. Two quad hardwire
height), 309 - 399 (above desk outlet box accepts four duplex
height) or 399 - 489 on Service Wall outlets on one face. Also specify
frame. Outlet cover mounts in top hardwire outlets cover, which has
row of Fence only. four outlet openings. Specify outlet
Outlets cover is 129 wide, and fillers for any unused outlet
mounts anywhere on Service Wall openings.
frame between 219 and 489 above Outlet boxes include openings to
the floor. Outlets cover corresponds permit continuous lay-in wiring with
to power components (specified Wiremoldt raceway. Electrical
separately) mounted on Service Wall contractor supplies infeed cable,
frame. Wiremold 2400t, and duplex
Outlets covers have four openings outlets. Outlet boxes can be planned
for power or PDC outlets. Specify back to back, with distribution on
outlet fillers for unused outlet one side of Service Wall.
openings in cover. Specify hinged NOTE: Currents cable tray access
outlet flap to conceal power or data covers and all AutoStrada access
outlet plugs. Each flap covers two covers cannot be used in the same
openings; two flaps conceal all four 99H zone as the wiremold raceway
openings in outlets cover. as the wiremold will not fit behind
For hardwire power applications the covers.
(required in City of Chicago) specify
hardwire outlets cover and hardwire
outlets box. Do not specify cable
tray covers at same level as
hardwire power.
18Access covers Currents
Service Walls and components
cable tray and slat wall covers
description w d h pattern no. smooth
99H cable tray covers 129 19 99 APC 0912 C ( ) $103.
249 19 99 APC 0924 C ( ) 122.
369 19 99 APC 0936 C ( ) 144.
489 19 99 APC 0948 C ( ) 187.
609 19 99 APC 0960 C ( ) 239.
729 19 99 APC 0972 C ( ) 293.
99H cable tray exit cover 129 19 99 APC 0912 CX ( ) 207.
99H slat wall covers 129 19 99 APC 0912 S ( ) 94.
249 19 99 APC 0924 S ( ) 107.
369 19 99 APC 0936 S ( ) 124.
489 19 99 APC 0948 S ( ) 165.
609 19 99 APC 0960 S ( ) 207.
729 19 99 APC 0972 S ( ) 251.
Order Code Specification Information Application Notes
Example: APC 0948 C 612 Specify finish. Cable tray and slat wall covers Cable tray exit cover permits power
APC Service wall cover provide integral performance jumpers and data/communication
surface on one or both sides of a cables to pass from wall to Currents
09 Height Service Wall or Fence frame. Cable desk service beam. Cable tray exit
48 Width tray and slat wall may be planned in cover, 129W only, has two openings
C Surface type combination with other painted or with sliding covers.
upholstered covers to enclose
612 Finish frames between 219H and 489H. Slat wall supports KnollExtra task
lights, monitor arms, paper trays,
Cable tray mounts from 219 - 309 file holders and other accessories.
only on any Service Wall frame.
Adjacent trays form continuous, Slat wall covers will support flat
easily accessible cable management panel monitor arms with varying
at worksurface or table height. weight limitations based on
Shorter segments provide local mounting and application. Please
cable management below outlet refer to the KnollExtra price list for
modules. Covers may span across a comprehensive mounting and
straight wall frame connection. weight limitation information by
application.
Bottom half of cable tray cover
permits cables to be managed on
surface of studs with one cable
holder (55 CAT5 cables) or two clips
(28 cables).
19Access covers Currents
marker surface and painted steel covers
description type w d h pattern no. M smooth textured
99H Marker surface covers 249 1 99 APC 0924 M $60.
369 1 99 APC 0936 M 71.
489 1 99 APC 0948 M 85.
609 1 99 APC 0960 M 95.
729 1 99 APC 0972 M 102.
169H Marker surface covers 489 1 169 APC 1648 M 120.
609 1 169 APC 1660 M 144.
729 1 169 APC 1672 M 165.
99H Painted steel covers smooth 129 19 99 APC 0912 P ( ) 48.
249 19 99 APC 0924 P ( ) 56.
369 19 99 APC 0936 P ( ) 61.
489 19 99 APC 0948 P ( ) 79.
609 19 99 APC 0960 P ( ) 87.
729 19 99 APC 0972 P ( ) 97.
textured 129 19 99 APC 0912 PT ( ) 50.
249 19 99 APC 0924 PT ( ) 60.
369 19 99 APC 0936 PT ( ) 71.
489 19 99 APC 0948 PT ( ) 85.
609 19 99 APC 0960 PT ( ) 95.
729 19 99 APC 0972 PT ( ) 102.
Order Code Specification Information Application Notes
Example: APC 0948 P 117 99H covers plan at any 99H level in Marker surface covers are steel with
APC Service wall cover 399, 489, or 649 Service Walls or a bright white dry-erase marker
Fence Frames. finish.
09 Height
48 Width For active face of 399H Service Wall Painted steel covers provide a
frame, specify two 99H covers each durable wall-like surface in smooth
P Surface type side. or textured finish.
117 Finish
For active face of 489H Service Wall Service Wall covers enclose frames
frame, specify three 99H covers between 219H and the top crown.
each side. Covers may be specified in any
combination of widths
For active face of 649H Service Wall corresponding to the total Service
frame, specify three 99H covers and Wall length. Covers may span across
one 169H cover each side. a straight wall frame connection.
For active face of Fence frames, For active surfaces with access
specify two 99 covers each side. to cables and
Surface type: power/data/communications outlets,
specify 99 and 169H segmented
P Painted covers as described in Specification
PT Textured painted Information. Normally, 99 cover
M Marker from 219 to 309 above floor is cable
tray or painted steel, and higher
Specify smooth or textured painted covers are painted, marker,
finish for steel covers. upholstered, tackable, or slat wall
surfaces.
20Access covers Currents
Service Walls and components
marker surface and painted steel covers
description type w d h pattern no. M smooth textured
169H Painted steel covers smooth 489 19 169 APC 1648 P ( ) $111.
609 19 169 APC 1660 P ( ) 134.
729 19 169 APC 1672 P ( ) 149.
textured 489 19 169 APC 1648 PT ( ) 120.
609 19 169 APC 1660 PT ( ) 144.
729 19 169 APC 1672 PT ( ) 165.
Order Code Specification Information Application Notes
Example: APC 0948 P 117 99H covers plan at any 99H level in Marker surface covers are steel with
APC Service wall cover 399, 489, or 649 Service Walls or a bright white dry-erase marker
Fence Frames. finish.
09 Height
48 Width For active face of 399H Service Wall Painted steel covers provide a
frame, specify two 99H covers each durable wall-like surface in smooth
P Surface type side. or textured finish.
117 Finish
For active face of 489H Service Wall Service Wall covers enclose frames
frame, specify three 99H covers between 219H and the top crown.
each side. Covers may be specified in any
combination of widths
For active face of 649H Service Wall corresponding to the total Service
frame, specify three 99H covers and Wall length. Covers may span across
one 169H cover each side. a straight wall frame connection.
For active face of Fence frames, For active surfaces with access
specify two 99 covers each side. to cables and
Surface type: power/data/communications outlets,
specify 99 and 169H segmented
P Painted covers as described in Specification
PT Textured painted Information. Normally, 99 cover
M Marker from 219 to 309 above floor is cable
tray or painted steel, and higher
Specify smooth or textured painted covers are painted, marker,
finish for steel covers. upholstered, tackable, or slat wall
surfaces.
21Access covers Currents
upholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
99H Wall covers 129 19 99 APC 0912 F ( ) $93. $93. $97. $100. $102. $103. $107. $114.
249 19 99 APC 0924 F ( ) 112. 114. 118. 122. 130. 135. 143. 150.
369 19 99 APC 0936 F ( ) 135. 141. 143. 151. 164. 168. 175. 188.
489 19 99 APC 0948 F ( ) 149. 151. 160. 175. 186. 190. 201. 212.
609 19 99 APC 0960 F ( ) 176. 186. 191. 209. 221. 236. 246. 255.
729 19 99 APC 0972 F ( ) n/a 211. n/a n/a n/a n/a n/a n/a
169H Wall covers 369 19 169 APC 1636 F ( ) 201. 209. 213. 230. 246. 251. 260. 276.
489 19 169 APC 1648 F ( ) 217. 236. 245. 260. 276. 291. 301. 317.
609 19 169 APC 1660 F ( ) 264. 276. 294. 311. 333. 345. 363. 390.
729 19 169 APC 1672 F ( ) n/a 312. n/a n/a n/a n/a n/a n/a
Order Code Specification Information Application Notes
Example: APC 0948 F15 For active face of 399H Service Wall Upholstered Service Wall covers
APC Service wall cover frame, specify two 99H covers. enclose frame between 219 and the
top crown.
09 Height For active face of 489H Service Wall
48 Width frame, specify three 99H covers. Specify widths corresponding to
wall frame width, or in any 129
F Surface type For active face of 649H Service Wall increment to accommodate 129W
15 Fabric group frame, specify three 99H covers and outlets covers or slat wall covers.
one 169H cover. Covers may span across a straight
For full fabric surface between 59 wall frame connection.
and 219, order upholstered For active surfaces with access to
structural base cover. cables and
For active face of Fence frames, power/data/communications outlets,
specify two 99 covers each side. specify 99 and 169H segmented
covers as described in Specification
Surface type: Information. Normally, 99 cover
F Upholstered from 219 to 309 above floor is cable
tray or painted steel, and higher
Specify fabric group: covers are painted, marker,
upholstered, tackable, or slat wall
10 Fabric group 10 surfaces.
15 Fabric group 15
20 Fabric group 20 When ordering 609 or wider covers,
30 Fabric group 30 please check width of fabric
40 Fabric group 40 specified.
50 Fabric group 50
55 Fabric group 55
22Access covers Currents
Service Walls and components
tackable upholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
99H Wall covers 129 19 99 APC 0912 A ( ) $176. $184. $187. $199. $212. $215. $223. $245.
249 19 99 APC 0924 A ( ) 176. 184. 187. 199. 212. 215. 223. 245.
369 19 99 APC 0936 A ( ) 176. 184. 187. 199. 212. 215. 223. 245.
489 19 99 APC 0948 A ( ) 190. 202. 209. 221. 240. 248. 261. 277.
609 19 99 APC 0960 A ( ) 227. 240. 251. 267. 294. 301. 314. 337.
729 19 99 APC 0972 A ( ) n/a 271. n/a n/a n/a n/a n/a n/a
169H Wall covers 369 19 169 APC 1636 A ( ) 261. 267. 279. 298. 313. 322. 341. 361.
489 19 169 APC 1648 A ( ) 293. 301. 312. 337. 361. 369. 394. 412.
609 19 169 APC 1660 A ( ) 345. 361. 376. 405. 436. 453. 468. 508.
729 19 169 APC 1672 A ( ) n/a 407. n/a n/a n/a n/a n/a n/a
189H Wall cover (replaces (2) 99H) 369 19 189 APC 1836 A ( ) 311. 320. 330. 350. 367. 383. 400. 420.
489 19 189 APC 1848 A ( ) 393. 400. 411. 436. 457. 468. 492. 517.
609 19 189 APC 1860 A ( ) 464. 481. 496. 520. 552. 563. 579. 611.
729 19 189 APC 1872 A ( ) n/a 542. n/a n/a n/a n/a n/a n/a
Order Code Specification Information Application Notes
Example: APC 0948 A20 For active face of 399H Service Wall Tackable upholstered Service Wall For passive Service Wall surfaces
APC Service wall cover frame, specify two 99H covers. For covers enclose wall frames between (corridors or conference areas)
passive face (along corridor or wall) 219 and the top crown. Covers specify 189H or 279H covers in
09 Height specify one 189 cover. incorporate a tackable, acoustical place of two or three 99H covers.
48 Width core in the same outward profile as
For active face of 489H Service Wall other upholstered covers. 189H covers may also be specified
A Surface type frame, specify three 99H covers or above 99H covers including outlets
20 Fabric group one 99H and one 189H cover. For Specify widths corresponding to covers below desk height on 489 or
passive face, specify 279H cover. wall frame width, or in any 129 649H Service Walls.
increment to accommodate 129W
For active face of 649H Service Wall outlets covers or slat wall covers. Service Wall with upholstered
frame, specify three 99H covers and Covers may span across a straight tackable covers has been tested to
one 169H cover or one 99H, one wall frame connection. NRC .40 and STC 22.
189H, and one 169H cover. For
passive face, specify one 279 and For active surfaces with access to When ordering 609 or wider covers,
one 169H cover. cables and please check width of fabric
power/data/communications outlets, specified.
For full fabric surface between 59 specify 99 and 169H segmented
and 219, order upholstered covers as described in Specification
structural base cover. Information. Normally, 99 cover
For active face of Fence frames, from 219 to 309 above floor is cable
specify two 99 covers each side. For tray or painted steel, and higher
passive face, specify one 189 cover. covers are painted, marker,
upholstered, tackable, or slat wall
Surface type: surfaces.
A tackable upholstered
Specify fabric group:
10 Fabric group 10
15 Fabric group 15
20 Fabric group 20
30 Fabric group 30
40 Fabric group 40
50 Fabric group 50
55 Fabric group 55
23Access covers Currents
tackable upholstered
description w d h pattern no. 10 15 20 30 40 45 50 55
279H Wall cover (replaces (3) 99H) 369 19 27 APC 2736 A ( ) $464. $481. $496. $520. $552. $563. $579. $611.
489 19 279 APC 2748 A ( ) 582. 603. 614. 649. 677. 698. 720. 752.
609 19 279 APC 2760 A ( ) 706. 720. 728. 775. 810. 828. 851. 880.
729 19 279 APC 2772 A ( ) n/a 820. n/a n/a n/a n/a n/a n/a
Order Code Specification Information Application Notes
Example: APC 0948 A20 For active face of 399H Service Wall Tackable upholstered Service Wall For passive Service Wall surfaces
APC Service wall cover frame, specify two 99H covers. For covers enclose wall frames between (corridors or conference areas)
passive face (along corridor or wall) 219 and the top crown. Covers specify 189H or 279H covers in
09 Height specify one 189 cover. incorporate a tackable, acoustical place of two or three 99H covers.
48 Width core in the same outward profile as
For active face of 489H Service Wall other upholstered covers. 189H covers may also be specified
A Surface type frame, specify three 99H covers or above 99H covers including outlets
20 Fabric group one 99H and one 189H cover. For Specify widths corresponding to covers below desk height on 489 or
passive face, specify 279H cover. wall frame width, or in any 129 649H Service Walls.
increment to accommodate 129W
For active face of 649H Service Wall outlets covers or slat wall covers. Service Wall with upholstered
frame, specify three 99H covers and Covers may span across a straight tackable covers has been tested to
one 169H cover or one 99H, one wall frame connection. NRC .40 and STC 22.
189H, and one 169H cover. For
passive face, specify one 279 and For active surfaces with access to When ordering 609 or wider covers,
one 169H cover. cables and please check width of fabric
power/data/communications outlets, specified.
For full fabric surface between 59 specify 99 and 169H segmented
and 219, order upholstered covers as described in Specification
structural base cover. Information. Normally, 99 cover
For active face of Fence frames, from 219 to 309 above floor is cable
specify two 99 covers each side. For tray or painted steel, and higher
passive face, specify one 189 cover. covers are painted, marker,
upholstered, tackable, or slat wall
Surface type: surfaces.
A tackable upholstered
Specify fabric group:
10 Fabric group 10
15 Fabric group 15
20 Fabric group 20
30 Fabric group 30
40 Fabric group 40
50 Fabric group 50
55 Fabric group 55
24Wall ends and connectors Currents
Service Walls and components
90° and 120° spine connectors
description w d h pattern no. paint
L connector, 90° 69 69 399 AX1 L39 ( )( ) $532.
69 69 489 AX1 L48 ( )( ) 640.
69 69 649 AX1 L64 ( )( ) 748.
T connector, 90° 69 79 399 AX1 T39 ( )( ) 532.
69 79 489 AX1 T48 ( )( ) 640.
69 79 649 AX1 T64 ( )( ) 748.
X connector, 90° 79 79 399 AX1 X39 ( )( ) 532.
79 79 489 AX1 X48 ( )( ) 579.
79 79 649 AX1 X64 ( )( ) 640.
V connector, 120° 5 1/29 5 1/29 399 AX1 V39 ( )( ) 532.
5 1/29 5 1/29 489 AX1 V48 ( )( ) 640.
5 1/29 5 1/29 649 AX1 V64 ( )( ) 748.
Y connector, 120° 6 1/29 5 1/29 399 AX1 Y39 ( )( ) 532.
6 1/29 5 1/29 489 AX1 Y48 ( )( ) 640.
6 1/29 5 1/29 649 AX1 Y64 ( )( ) 748.
Order Code Specification Information Application Notes
Example: AX1 L39 612 612 For L, T, V, Y connectors specify: Specify painted finishes for connector L, T, and X connectors join Currents
AX1 Currents connector trim covers and crown end caps. Service Wall frames at 90° angles
Seventh position: and include vertical trim covers, top
L Type painted finish for vertical trim cover When ordering connectors for the cap and standard crown end caps,
39 Height and raceway cover Service Wall with 19H compact and one spare set of straight
crown, specify compact crown end connectors.
612 Trim/raceway cover Eighth position, and X connectors: caps separately.
finish painted finish for top cap and crown V and Y connectors join Currents
612 Top/end cap finish end caps Service Wall frames at 120° angles
and include vertical trim covers, top
cap and standard crown end cap.
25Wall ends and connectors Currents
other ends and connectors
description type w d h pattern no. paint list price
Outrigger deep 39 159 219 AA1ORD( ) $252.
standard 39 89 219 AA1OR( ) 184.
High low straight connector 48 - 399 – 59 489 AX1 HLS4839 ( )( ) 291.
64 - 399 – 59 649 AX1 HLS6439 ( )( ) 492.
64 - 489 – 59 649 AX1 HLS6448 ( )( ) 330.
Service Wall starter 399 19 29 399 AX1 SWS39 ( ) 164.
489 19 29 489 AX1 SWS48 ( ) 184.
649 19 29 649 AX1 SWS64 ( ) 211.
Straight connector kit (replacement) – – – AX1 S 35.
Order Code Specification Information Application Notes
Example: AX1 HLS4839 612 612 Specify painted finishes for outrigger, Outrigger connects to structural High-low straight connectors join
AX1 Currents connector high low straight connector and base cover at any point. Outriggers Service Wall of different heights in a
Service Wall starter. (or perpendicular systems panels) straight line.
HLS Type are required every 88 and adjacent
4839 Height to flat end for adequate support. Service Wall starter connects
Specify deep outriggers when Service Wall to building wall.
612 Vertical cover finish
cantilevering 249D worksurfaces Straight connector is replacement
612 Crown end finish without adjacent perpendicular hardware kit to join Currents Wall
systems panels or Service Wall frames of the same height end to
connectors. end. Kit includes four barrel-shape
Standard outrigger should be connectors and hardware.
specified when desks with service
beam are positioned along Service
Wall.
26Wall ends and connectors Currents
Service Walls and components
flat ends and crown end caps
description type d h pattern no. paint list price
Flat end 59 399 AX1 F39 ( )( ) $169.
59 489 AX1 F48 ( )( ) 190.
59 649 AX1 F64 ( )( ) 214.
Crown end cap APT ( ) 5.
Crown end cap compact Kit of 1 APTA CC1 ( ) 18.
Kit of 10 APTA CC ( ) 171.
Order Code Specification Information Application Notes
Example: AX1 F48 For flat ends specify: Flat end finishes end of
AX1 Currents connector corresponding height Service Wall
Seventh position: when end of Service Wall is
F Flat End painted finish for outside trim cover supported by outriggers.
48 Height and raceway cover
612 Vertical cover finish Eighth position:
612 Crown end finish painted finish for crown end cap
When specifying a flat end for a
Service Wall frame with the 1 inch
compact crown, compact crown end
caps must be ordered separately.
Specify painted finish for standard
crown end cap.
Specify trim grey or easy grey
integral color for compact crown end
cap.
27Wall ends and connectors Currents
Fence ends and connectors
connectors
description w d h pattern no. list price
L connector, 90 degrees 69 69 199 AX1 L18 ( ) $534.
T connector, 90 degrees 69 79 199 AX1 T18 ( ) 545.
X connector, 90 degrees 79 79 199 AX1 X18 468.
V connector, 120 degrees 5 1/29 5 1/29 199 AX1 V18 ( ) 512.
Y connector, 120 degrees 6 1/29 5 1/29 199 AX1 Y18 ( ) 235.
Order Code Specification Notes Application Notes
Example: AX1 L 18 613 Specify painted finishes for connector L, T and X connectors join Fence Flat end finishes end of Fence
AX1 Fence connector trim covers. frames at 90° angles and include frames and includes crown end
vertical trim covers, top cap and detail.
L Type For L, T, V and Y connectors crown end caps and one set of
18 Height specify finish for vertical trim. straight connectors. Specify AX1 F18 ( ) for use with
sloped crown covers. Specify AX1A
613 Trim finish All top caps and crown covers are Y and V connectors join Fence F18L ( ) for use with AutoStrada
trim grey. Specify finish for outside frames at 120° angles. flat, low profile crown covers.
trim of flat end. Specify AX1A F18H ( ) for use with
AutoStrada flat, high profile crown
covers.
28Wall ends and connectors Currents
Service Walls and components
Fence ends and connectors
connectors
description w d h pattern no. list price
Flat end for use with – 59 219 AX1 F18 ( ) $205.
sloped crown covers
Flat end for use with – 59 219 AX1A F18H ( ) 205.
flat crown covers – 59 219 AX1A F18L ( ) 205.
Order Code Specification Notes Application Notes
Example: AX1 L 18 613 Specify painted finishes for connector L, T and X connectors join Fence Flat end finishes end of Fence
AX1 Fence connector trim covers. frames at 90° angles and include frames and includes crown end
vertical trim covers, top cap and detail.
L Type For L, T, V and Y connectors crown end caps and one set of
18 Height specify finish for vertical trim. straight connectors. Specify AX1 F18 ( ) for use with
sloped crown covers. Specify AX1A
613 Trim finish All top caps and crown covers are Y and V connectors join Fence F18L ( ) for use with AutoStrada
trim grey. Specify finish for outside frames at 120° angles. flat, low profile crown covers.
trim of flat end. Specify AX1A F18H ( ) for use with
AutoStrada flat, high profile crown
covers.
29Wall ends and connectors Currents
Fence ends and connectors
other hardware
description type w d h pattern no. list price
1 5 1 3
T-end adapter 09 or 1 /89 extension 1 /89 2 /89 2 /89 AX1 AK1 ( ) $35.
T-end and stabilizer end cabinet adapter 3 1/29 extension 49 59 16 1/29 AX1 AK3 ( ) 122.
Flat wall starter 489H service wall 3 1/49 279 AX1 FWS 48 105.
649H service wall 3 1/49 439 AX1 FWS 64 115.
Fence and 399H wall 3 1/49 189 AX1 FWS 39 97.
High-low straight connector 489H wall - Fence AX1 FHLS4818 ( ) 604.
Order Code Specification Information Application Notes
Example: AX1 FWS 39 Specify painted finishes for T-end Standard 399H fence accepts High-low Fence connector joins
AX1 Fence end adapter kits. Currents T-ends for 399 Service standard 399H Fence and 489H
Wall. Currents Service Wall.
FWS Type Flat wall starter is black only.
39 Height Specify AX1 AK1 adapter kit to Fence T-ends adaptors, stabilizer
Crown end covers are trim grey. complete bottom trim and crown end end cabinet adaptors, high-low
of T-ends with 09 or 1 1/89 extension. straight connectors and universal
panel starters are only compatible
Specify AX1 AK3 adapter kit to with Fence frames that are specified
complete bottom trim and crown end at 40 inches high with the 18- 1/29
of T-ends with 39 extension. high leg (AX1 LEG). To use these
Flat wall starter connects Fence components when Fence is planned
frames and Service Wall to building with shorter legs that deliver overall
wall. heights of 27 or 28 inches high,
please contact Knoll Custom
Product Development for assistance.
30Wall frame accessories Currents
Service Walls and components
Wall frame
description type w d h pattern no. list price
Acoustical inserts 399H 129 29 349 APA 39 $44.
489H 129 29 439 APA 48 51.
649H 129 29 599 APA 64 68.
Order Code Specification Information Application Notes
Example: APT 612 Acoustical inserts fit between studs
APT Service wall trim in Service Wall frame to increase
control of sound transmission.
612 Painted finish Inserts are bagged in heights
corresponding to wall frame. Specify
four inserts for 489W Service Wall
frame, five for 609W Service Wall
frame, and six for 729W Service
Wall frame. Service Walls with
acoustical inserts have been tested
to STC 33.
31Wall frame accessories Currents
Fence frame
description type w d h pattern no. list price
1 3
Wire manager cover (set of 2) 3 /29 39 18 /89 AR1VCM $90.
3 1/29 39 59 AR1VCM5 90.
3 1/29 39 69 AR1VCM6 90.
Carpet grips (set of 10) AA1CG 18.
Non-skid pads (set of 10) AA1NSK 50.
Hardwire fence infeed (NYC) 2+2 AR1 EPHF 716.
3+3 AR1 TPHF 761.
Fence to desk brackets 279h Fence AA1FDB27( ) 103.
289h Fence AA1FDB28( ) 103.
Fence end bracket kit AB1FAE ( ) 279.
Order Code Specification Information Application Notes
Example AR1 VCM Wire manager covers are integral Wire manager covers snap into the Fence to desk brackets are only
AR1 Raceway color trim grey. sides of the Fence legs to guide compatible with Fence frames
cables from the floor to the specified with shorter Fence legs
VCM Type underside of the frame. (AX1LEG5, AX1LEG6) where the
total height of Fence is 279 or 289 to
Carpet grips and/or non-skid pads the top of the crown.
snap onto bottom of stabilizer feet to
prevent legs from sliding. Fence to desk brackets may not be
specified as a means of end
Hardwire fence infeed is approved supporting worksurfaces. Fence to
for City of New York installation. desk brackets may only be specified
Infeed includes wire manager cover, for use with freestanding tables.
junction box and connector to desk
height outlet module. Fence end brackets attach to the
Currents Fence to support one end
Fence to desk brackets connect of rectilinear or one back edge of a
Fence frames to freestanding tables corner worksurface when the other
to stabilize Fence. Fence to desk ends are properly supported by legs,
brackets are specified as an storage or panel brackets. Refer to
alternative to stabilizer feet as a the specific worksurface
means of stabilizing freestanding Application Notes for support
Fence runs. requirements.
Fence end brackets support the
underside of the worksurface in 19
increments from 269 to 289 (279 to
299 top height).
32Spine ends and connectors Currents
Service Walls and components
Spine end connectors for Dividends Horizon panels and screens
description application h w d pattern no. list
1
Spine end connector 369h panel/399h spine 399 59 /29 AX1SED3939 ( )( )( )( ) $337.
1
369h-429h panel/ 489h spine 489 59 /29 AX1SED4848 ( )( )( )( ) 352.
1
369h-649h panel/ 649h spine 649 59 /29 AX1SED6464 ( )( )( )( ) 420.
1
429h panel/ 399h spine + 19 crown 429 59 /29 AX1SED4239 ( )( ) 337.
1
429h panel/ 399h spine + 49 crown 439 59 /29 AX1SED4339C ( )( ) 337.
1
509h panel/ 399h spine 509 59 /29 AX1SED5039 ( )( ) 352.
1
509h panel/ 489h spine + 19 crown 509 59 /29 AX1SED5048 ( )( ) 371.
1
509h panel/ 489h spine + 49 crown 529 59 /29 AX1SED5248C ( )( ) 352.
1
579h panel/ 399h spine 579 59 /29 AX1SED5739 ( )( ) 405.
1
579h panel/ 489h spine 579 59 /29 AX1SED5748 ( )( ) 405.
1
649h panel/ 399h spine 649 59 /29 AX1SED6439 ( )( ) 420.
1
649h panel/ 489h spine 649 59 /29 AX1SED6448 ( )( ) 420.
1
789h panel/ 489h spine 789 59 /29 AX1SED7848 ( )( ) 641.
1
789h panel/ 649h spine 789 59 /29 AX1SED7864 ( )( ) 612.
Order Code Specification Information Application Notes
Example: AX1 SED 6448 613 812 For spine end connectors with panel Spine end connectors are complete When attached panel/screen is
AX1 Spine connector lower than spine specify crown type end cover and trim for an between the nominal height of the
and finish for crown end cap. AutoStrada or Currents spine. Side spine and the top of the Currents
SED Type edges of spine end connectors 49h crown, spine end connector
1. Crown type:
64 Panel height C=Currents standard 49h accept end starters for Dividends must cover the entire height of the
48 Spine height L=low profile flat 19h Horizon panels and screens. spine with crown.
613 Vertical cover finish H=high profile flat 1 1/49h
F=compact 19h In most cases spine end connectors Spine end connectors include
812 Top cap finish match the height of the attached painted aluminum outside cover
2. All crown end caps are available Dividends Horizon panel/screen. with flat top cap and inside cover
in all painted finishes. When attached panel/screen is (where applicable) over the end of
lower than the spine, the spine end the spine.
For all spine end connectors connector is as high as the nominal
specify vertical cover and top height of the spine and the crown Inside base trim for Currents
trim finish: requires an end cap. raceway is recommended to finish
inside when combined with
Specify low profile flat metal crown standard Currents recessed base
3. Vertical cover finish: covers to align with a 509h
All standard paint finishes raceway covers. Base trim is not
Dividends Horizon panel/screen. required with AutoStrada spine base
4. Top cap for vertical cover: covers.
812=Easy Grey
813=Trim Grey
And all standard painted finishes
End connectors on this page
begin 1/29 above floor.
33Spine ends and connectors Currents
3 1/29 spine extender kit for use with ceiling infeed or panels
description application h w d pattern no. list
Spine extender kit for use 399h spine 399 59 49 AX1SX39 C (L/C/P)( )( )( ) $700.
with Currents Spine 489h spine 489 59 49 AX1SX48 C (L/C/P)( )( )( ) 723.
649h spine 649 59 49 AX1SX64 C (L/C/P)( )( )( ) 855.
Spine extender kit for use 399h spine 399 59 49 AX1SX39 A (L/C/P)( )( )( ) 843.
with AutoStrada Spine 489h spine 489 59 49 AX1SX48 A (L/C/P)( )( )( ) 864.
649h spine 649 59 49 AX1SX64 A (L/C/P)( )( )( ) 1,002.
Order Code Specification Information Application Notes
1
Example: AX1 SX 48 AL 613 613 For all 3 /29 spine extenders specify Spine extenders include brackets, This extension can also make up for
613 spine base type: side and top trim covers between the the dimensional gain of one
AX1 Spine connector end of a spine and any spine end Dividends Horizon panel or screen
A AutoStrada connector to add 3 1/29 to the length in the middle of a cluster of
SX Type C Currents of a spine. workstations.
48 Spine height Then specify crown end type. Spine end connector must be In most cases the spine end
A Spine type L=Flat low/high profile metal crown specified separately to finish off
end cap connector matches the height of the
L Crown end type face of spine extender. attached Dividends Horizon panel
C=Standard and compact sloped
613 Top cap finish end cap or screen, but the extending area is
Spine extender dimension matches only as high as the nominal height
613 Cover finish P=Power Pole that of the Currents 3 1/29x 59 ceiling of the spine (bottom of crown) so the
613 Base trim finish Then specify finish for vertical trim infeed panel which may be added crown always requires an end cap.
covers, all standard painted between nominal spine height and
finishes. ceiling for connection to building When attached panel or screen is
power, data and communications lower than the spine, the spine end
Then specify base cover finish. supply. connector should be the same height
AutoStrada spine base covers are as the nominal height of the spine.
clear anodized aluminum (AA) or
painted finish excluding silver.
Currents spine raceway covers are
available in any painted finish only.
Then specify top cap finish (if
applicable).
34End Starters Currents
Service Walls and components
To attach Dividends Horizon panels and screens to spine end
connector
description application h w d pattern no. list
End starters for Dividends 369h panel, flush, left end of Service Wall 369 19 39 AX1DHES3600L(5)( ) $266.
Horizon panels and screens 369h panel, flush, right end of Service Wall 369 19 39 AX1DHES3600R(5)( ) 266.
369h panel, offset 1 panel thickness, left end of 369 19 39 AX1DHES3603L(5)( ) 266.
Service Wall
369h panel, offset 1 panel thickness, right end of 369 19 39 AX1DHES3603R(5)( ) 266.
Service Wall
429h panel, flush, left end of Service Wall 429 19 39 AX1DHES4200L(5)( ) 266.
429h panel, flush, right end of Service Wall 429 19 39 AX1DHES4200R(5)( ) 266.
429h panel, offset 1 panel thickness, left end of 429 19 39 AX1DHES4203L(5)( ) 266.
Service Wall
429h panel, offset 1 panel thickness, right end of 429 19 39 AX1DHES4203R(5)( ) 266.
Service Wall
509h panel, flush, left end of Service Wall 509 19 39 AX1DHES5000L(5)( ) 266.
509h panel, flush, right end of Service Wall 509 19 39 AX1DHES5000R(5)( ) 266.
509h panel, offset 1 panel thickness, left end of 509 19 39 AX1DHES5003L(5)( ) 266.
Service Wall
509h panel, offset 1 panel thickness, right end of 509 19 39 AX1DHES5003R(5)( ) 266.
Service Wall
579h panel, flush, left end of Service Wall 579 19 39 AX1DHES5700L(5)( ) 266.
579h panel, flush, right end of Service Wall 579 19 39 AX1DHES5700R(5)( ) 266.
579h panel, offset 1 panel thickness, left end of 579 19 39 AX1DHES5703L(5)( ) 266.
Service Wall
579h panel, offset 1 panel thickness, right end of 579 19 39 AX1DHES5703R(5)( ) 266.
Service Wall
649h panel, flush, left end of Service Wall 649 19 39 AX1DHES6400L(5)( ) 266.
649h panel, flush, right end of Service Wall 649 19 39 AX1DHES6400R(5)( ) 266.
649h panel, offset 1 panel thickness, left end of 649 19 39 AX1DHES6403L(5)( ) 266.
Service Wall
649h panel, offset 1 panel thickness, right end of 649 19 39 AX1DHES6403R(5)( ) 266.
Service Wall
Order Code Specification Information Application Notes
Example: AX1 DHES 36 00 L (5) 1.Offset End starters connect a Dividends For a single workstation (0
AX1 Spine connector 00=Flush Horizon panel or screen to either intermediate panels), specify 2
03=Offset 1 panel thickness side of a same height or taller spine spine end connectors and 2 end
DH Dividends Horizon end connector. End starters for starters positioned offset by 1 panel
ES End starter 2.Top cap type Dividends Horizon panels and thickness.
36 Panel height 5=Metal flat screens include specified end top
cap. For a cluster of 2 workstations (1
00 Offset 3.Paint finish intermediate panel), specify 1 panel
5 Top cap type All standard paint finishes End starters may be positioned in starter, 2 spine end connectors, 1
either of two configurations: flush spine extender, and 2 end starters
613 Painted finish positioned offset by 1 panel
with end of spine or offset one panel
thickness beyond end of spine. For thickness.
full access to entire width of spine For a cluster of 3 workstations, (2
surface, position end starters offset intermediate panels), extend the
one panel thickness. spine another 129, specify 2 panel
starters, 2 spine end connectors,
and 2 end starters positioned flush.
For a cluster of 4 workstations (3
intermediate panels), extend the
spine 129 and specify 3 panel
starters, 2 spine end connectors,
and 2 end starters (1 end starter
flush and the other offset by 1 panel
thickness).
For a cluster of 5 workstations (4
intermediate panels) extend the
spine by 129 and specify 4 panel
starters, 2 spine end connectors,
and 2 end starters positioned offset
by 1 panel thickness.
35You can also read
