Center for Workforce Development - Monroe 2-Orleans BOCES
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Center for Workforce
Development
See
NEW our
cu
classe linary
pages s on
17- 1
9
site
Check web
Westview Commons
2021-2022 for catalog
d new
updates an s
ng
3555 Buffalo Road
course listi
Rochester, NY 14624
(585)349-9100
www.monroe2cwd.edu
Welcome
Welcome
Monroe 2–Orleans BOCES Center for Workforce Development
Table of Contents
(CWD) is a premiere educational service organization focused on CWD Overview ..................................................................2
serving adult learners in Monroe County and the broader Finger
Adult Literacy and High School
Lakes region. We host a wide range of programs to support our
Equivalency Preparation....................................................3
population of learners. Whether you’re looking to dive into a new
career with one of our job training programs, earn your high school English Language Learning ..............................................5
equivalency diploma, become conversational in English, or simply GPS Program & Vocational Assessments........................6
looking to participate in “weekend warrior” continuing education
Job Training Programs polices and overview.................7
courses – we offer it all. Let us help you take the next step toward
your goals. In addition to our educational programs, we provide Job Training Course listing ...............................................9
career service support, and we have long established partnerships Continuing Education policies and overview...............12
with many community organizations to help you overcome any
barriers that may be preventing you from taking the next step. Continuing Education Program listings.........................14
Don’t wait until tomorrow to take the next step toward your future. Culinary Arts......................................................................17
Let us help you today! ED2GO, Customized Training Solutions........................20
Thomas Schulte, CWD Director
Mission
BOCES 2 Center for Workforce Development will strive to provide quality, cost-effective educational and
workforce services in partnership with other higher educational agencies, the local workforce community and
the adult learners we serve in a manner that supports excellence and equity for all learners.
Facility Locations
Both locations offer free parking.
CWD Main Office
Westview Commons
3555 Buffalo Road
Rochester, NY 14624
CWD Continuing Education Office
WEMOCO CTE Center
3589 Big Ridge Road
Spencerport, NY 14559
Phone: (585)349-9100
Fax: (585)349-9101
CWD Main Office Business Hours:
Mon. - Fri. 8 a.m. - 4 p.m.
Please visit us online for more
information: www.monroe2cwd.edu
(585)349-9100
The Center for Workforce Development is fully committed to maintaining the health & safety of
our students, staff & visitors. Guidelines on individual health assessments, physical distancing,
regular disinfecting, and the wearing of masks have been established. Please refer to our
website or call (585)349-9100 for more detailed information.
2
Adult
Career Job Literacy
Training Programs
We’re ready for you! What are you ready for?
CWD’s literacy department helps adults improve their reading and math skills, prepare to earn their High School Equivalency
(HSE) diploma, and develop valuable employment skills. We also help those born outside the US develop stronger English
language skills, so they can get better jobs, communicate with members in their community, and work towards US citizenship.
We offer traditional classes in the day or evening, as well as at-home distance learning and single-day workshops. There are
many pathways to success. Let us help you decide which is right for you!
Ready to earn your HSE diploma?
Improve your skills in reading, writing, mathematics, social studies, and science and earn your High School Equivalency diploma.
Ready to improve your English?
Work with a certified instructor to help you with your English language reading, listening, speaking, and writing skills.
All programs are:
• Specifically tailored towards each student’s academic level
• Taught by NYS certified teachers
• Free, following $25 one-time registration fee (waived for individuals with a NYS benefit card)
To learn more or enroll in a program click here or call 585-349-9100
Pathways to High School Equivalency (HSE)
There are multiple pathways to earning your High
School Equivalency diploma. You can take the HSE
exam, apply previously earned college credits, or
The HSE Exam use previous GED and Regents Exam scores.
Which path is right for you?
24 College
Credits Call us for more information 585-349-9100
NEDP
(National
External
Diploma Did
you
Program) know?
Those with a HS
Regents & diploma can earn
HSE Test up to $10,000 a year
more than a
non-graduate.
3
Adult
Career Job Literacy
Training Programs
Adult Basic Education and High School Equivalency Preparation
Classroom Instruction. Traditional, in-person instruction is the approach students often find the most success with. Improve
your skills in reading, math, social studies, science, and writing to pass the High School Equivalency (HSE) exam. Instruction is
individualized to your needs. Classes are taught by certified instructors in the daytime and evening, Monday – Thursday.
At-Home Distance Learning. At-home distance learning is designed for those who are
motivated to earn their HSE diploma, but are unable to attend regular classroom sessions.
Students should be able to commit to at least 6 hours per week of at-home study. Students Did
you
learning at home also have access to tutoring support; see individual programs for details. know?
• SMART/GRASP are packet-based programs with curriculum individualized for each student.
Instructors send students a packet of work to complete every two weeks. Students are also
eligible for up to 3 hours a week of tutoring from a certified instructor. The Adult Career Education
and Diploma (ACED) Dual
• Fast Track Math is a NYS program specifically designed to prepare students for the Math
Enrollment Program allows
subtest. Instructors send students a packet of work to complete every two weeks. Students
adult students, who are actively
are also eligible for up to 6 hours a week of tutoring from a certified instructor.
working on their High School
• National External Diploma Program (NEDP) is a hands-on learning program completed at Equivalency (HSE) Diploma, to
your own pace, primarily on a computer. NEDP is designed for adults with work and life enroll in a job training program
experiences and a high degree of learning independence. Students are assigned an advisor at the same time and for a
to guide them through the program and, after successful completion of a portfolio of life and reduced cost, allowing them to
academic skills, they are awarded a NYS High School Equivalency diploma. be ready for a new career faster.
Did Beginning
January
Taking the HSE Exam
you
know? 2022, the
GED will Register to Test. CWD can be your test center with 3 testing locations in
serve as the
Gates, Spencerport, and Downtown Rochester. But we’re not just a test
High School Equivalency test
in New York State. center. We can walk you through the registration process and help you with
every step along the way.
• Email: hseinfo@monroe2boces.org
Struggling with Math? • Call: 585-349-9100
Learn at home with tutoring
support or enroll in an evening
class or a single day workshop. One-Day Workshops. Whether you’re already enrolled in an HSE program or
Join the FAST TRACK not, our single-day workshops can help you prepare. Enroll in one before you
to becoming a test to give yourself the best chance of passing.
Math Master!
4
Adult
Career Job Literacy
Training Programs
Adult English Language Learning
Classroom Instruction. Our ESOL program is for individuals with limited English
proficiency. It provides instruction in the areas of listening, speaking, reading, and writing.
Learn the skills necessary to be successful in the workplace, enter education programs, or Did We can help
earn your US citizenship. Instruction is individualized to your needs. Classes are taught by
you prepare you for
know? the US citizenship test
certified instructors in the daytime and evening, Monday – Friday.
ESOL Distance Education. Designed for those with some English proficiency, but unable
to attend regular classroom sessions, ESOL Distance Education allow students to learn
and practice English at home through packets or online materials. Students should be able to commit to at least 6 hours per week of
at-home study and have access to tutoring support. Instruction can also be provided to help students meet their individual goals, such as
employment or US Citizenship.
Integrated Job-Training. We offer job-training programs with extra support for English language learners in programs such as
Nurse Assistant and Commercial Driver’s License/Bus Driver. Tuition assistance available for qualified individuals.
If you are interested in learning English, contact us by email: cwdinfo@monroe2boces.org or by phone (in English only):
585-349-9100
• Если вы заинтересованы в изучении английского языка, свяжитесь с нами по email: cwdinfo@monroe2boces.org или по
телефону (только на английском языке): 585-349-9100
• Якщо ви зацікавлені у вивченні англійської мови, зв'яжіться з нами електронною поштою: cwdinfo@monroe2boces.org
або телефоном (лише англійською мовою): 585-349-9100
• Nếu bạn muốn học tiếng Anh, hãy liên hệ với chúng tôi qua email: cwdinfo@monroe2boces.org hoặc qua điện thoại
(chỉ bằng tiếng Anh): 585-349-9100
• Ikiwa una nia ya kujifunza Kiingereza, wasiliana nasi kwa barua pepe: cwdinfo@monroe2boces.org au kwa simu
(kwa Kiingereza tu): 585-349-9100
• Wenn Sie Englisch lernen möchten, kontaktieren Sie uns per E-Mail: cwdinfo@monroe2boces.org oder telefonisch
(nur auf Englisch): 585-349-9100
• Si vous souhaitez apprendre l'anglais, contactez-nous par e-mail: cwdinfo@monroe2boces.org ou par téléphone
(en anglais uniquement): 585-349-9100
• Si usted está interesado en aprender inglés, en contacto con nosotros por email: cwdinfo@monroe2boces.org o por teléfono
(sólo en inglés): 585-349-9100
• Se você está interessado em aprender inglês,
entre em contato conosco por e-mail:
cwdinfo@monroe2boces.org ou por telefone
(somente em inglês): 585-349-9100
• Se siete interessati a imparare l’inglese, contattarci via
el correo electrónico: cwdinfo@monroe2boces.org
o per telefono (solo in inglese): 585-349-9100
• 如果你有兴趣学习英语, 通过联系我们 email:
cwdinfo@monroe2boces.org 或通过电话（只有英文):
585-349-9100
• ةيزيلجنإلا ةغللا ملعتب اًمتهم تنك اذإ، ديربلا ربع انب لصتاف
ينورتكلإلا:cwdinfo@monroe2boces.org ربع وأ
)طقف ةيزيلجنإلاب(فتاهلا: 585-349-9100
• यदि आप अंग्रेजी सीखने में रुचि रखते हैं, तो हमें ईमेल से संपर्क
करें: cwdinfo@monroe2boces.org या केवल फोन पर
(अंग्रेजी मे)ं : 585-349-9100
• ຖ້າທ່ານສົນໃຈຢາກຮຽນພາສາອັງກິດ, ຕິດຕໍ່ພວກເຮົາທາງອີເມວ:
cwdinfo@monroe2boces.org ຫຼືທາງໂທລະສັບ
(ເປັນພາສາອັງກິດເທົ່ານັ້ນ): 585-349-9100
5
GPS Guidance. Progress. Success.
Navigational Services to REINVENT YOURSELF
and REINVENT YOUR FUTURE
Plot Your Route
GPS Services are designed to provide out-of-
school youth with the necessary assistance
Are you between the ages of and resources to navigate the complex course
ahead of them as they strive to secure an
16 – 24 and reside in Monroe independent and stable future. The Center
County? for Workforce Development (CWD) at
Are you not sure what your Monroe 2–Orleans BOCES can provide
year-round services to eligible youth.
next step should be to secure
your future? Benefits
Do you want to gain greater • A mentor to help with career guidance and
employment, school applications, resume
independence or financial
development and interviewing skills
security?
• Assistance with working with social agencies to secure housing, transportation,
Have you been driving around clothing and additional services
but haven’t found your • Financial incentives such as gift cards and bus passes for meeting pre-determined
destination yet? goals
Let the Center for Workforce Eligibility
Development provide you with • Between the ages of 16 – 24
guidance and support to help • Monroe County Resident
you identify and achieve your • Able to identify with at least one barrier to employment (such as pregnant or
career goals. parenting teen, foster child, youth offender, homeless, low income, basic skills
deficient)
Vocational Assessments
Are you thinking of a new career, but just don’t know where to start?
Contact the Center for Workforce Development’s Transition Specialist to learn more about how our
Vocational Assessments, and analyses can point you in the right direction
Working directly with our Transition Specialist you will be led Vocational Assessments and Career Counseling is available through
through a Vocational Assessment examining your academic and referrals from ACCES-VR and private pay clients. Services can be
work aptitudes, abilities, interests, employment readiness, memory provided at an hourly rate, or flat rate.
styles, and transferable work skills.
For more information, contact us at (585)349-9100 or gpsinfo@monroe2boces.org
6
Job Training Programs
We provide Career & Technical Education programs that are affordable, Tuition Assistance Available for Eligible
short-term, and convenient for the adult learner. Course curriculum is Students!
industry-specific and emphasizes practical application of key concepts
CWD provides quality programming that is reasonably
and skills, utilizing the latest technology. We provide a student-centered
priced when compared to similar programs offered by local
learning environment where students learn from highly knowledgeable
educational institutions and colleges.
teachers with years of industry experience. Students who successfully
complete a program will have the knowledge and skills needed to Students may be eligible to receive funding through a variety
secure employment in a variety of industry sectors. of organizations including: RochesterWorks!, Finger Lakes
Works!, GLOW WDB, ACCES-VR, CSEA, HPOG-WIO, and
How to Register: Veterans Benefits.
Various federal grants are also available as well as direct or
Phone private student loans. Please see website for Refund Policy.
(585)349-9100
Credit cards (VISA/Master Card) Check (Payable to Monroe
In-Person 2 BOCES), Money Order and cash are acceptable forms of
at the CWD Main Office between payment for registration and tuition.
8 a.m. and 4 p.m., Mon. – Fri. For more info, contact our Financial Aid office at
Online Registration for Entrance (585)349-9164
Assessment only Please see page 8 for Job Training Program Policies.
www.monroe2cwd.edu
Job Training Admissions Process
START HERE
OR START HERE
If you want more info on our If you have decided which program you want to
CWD Programs, attend a enroll in, attend an Entrance Assessment Session
FREE Information Session
Schedule your Entrance Assessment here
Schedule your FREE •$25 Registration fee
Information Session here • Fee waived if you present a NYS benefit card
Attended an Entrance Attended an Entrance Assessment Session
Assessment Session and and met minimum requirements
did not meet requirements.
Submit required Finalize payment arrangements:
Enroll in our Literacy Call to schedule documents if applicable • May include community agency
Program to improve retest • High School diploma/ funding or financial aid providing
your scores medical paperwork your program qualifies
Enrollment confirmed
BOCES 2, Center for Workforce Development Council on Occupational Education
is accredited by the Commission of the 7840 Roswell Road, Bldg. 300, Suite 325
Council on Occupational Education (COE) Atlanta, GA 30350
www.council.org Telephone: 770.396.3898
Fax: 770.396.3790
7
JobTraining
Job TrainingPrograms
Programs
Job Training Programs Policies
Admissions: The adult learner will be responsible for the debt collection fees in addition
CWD admits, as adult learners, applicants who have completed a program to the outstanding balance. All fees incurred due to accounts being
application and passed the TABE assessment. Applicants must submit all required referred to collections will come at the student’s expense.
documentation, secure satisfactory payment arrangements and be beyond the Any adult learner wishing to withdraw should complete a Student
compulsory age of attendance as set by New York State. Withdrawal Form, which can be obtained from either the Admissions
Code of Conduct: Advisor, or the CWD main office at Westview Commons.
The Monroe 2–Orleans BOCES is committed to providing a safe, respectful, healthy, Federal Title IV Refunds:
civil, orderly and supportive school environment where students may receive, and The financial aid (Pell Grant and student loans) earned by the adult learner
staff may deliver quality educational services without disruption or interference. is equal to the percentage of the period of enrollment completed. When
Responsible behavior by students, staff, parents, board members, and visitors is an adult learner withdraws before completing more than 60% of the period
essential to achieving this goal. of enrollment, the percentage of financial aid is prorated using the Federal
The Board has a set of expectations for conduct on all BOCES property (whether Refund/Repayment Policy.
owned or leased) and at all BOCES functions (wherever the function is located) and/or The returned funds must be refunded to the following sources in this
including at a work-based activity site. These expectations are based on the principles specific order:
of civility, mutual respect, citizenship, character, tolerance, honesty and integrity.
1. Unsubsidized Federal Direct Loans
Withdrawal/Dismissal Refund Policy Full Refund 2. Subsidized Federal Direct Loans
A written request to withdraw from the course must be received by the CWD office 3. Federal Pell Grant
within 24 hours of the scheduled start of programming. A $100 processing fee will
be deducted from the full refund amount. Outstanding Balances:
Upon termination of enrollment, any balance due to
Partial Refund: A written request to withdraw from the course must be received by CWD (based on the school’s refund policy) is payable immediately.
the CWD office upon withdrawal. Total refunds will follow the guidelines outlined All charges on the student’s account must be paid in full prior to the
below minus any non-refundable fees associated with the associated program. completion of the training program. CWD reserves the right to withhold
• Up to 7% of the program hours completed = 75% refund student transcripts and deny approval for state board examinations to any
• Up to 13% of the program hours completed = 50% refund student who has an outstanding balance with the Financial Aid Office.
• Up to 20% of the program hours completed = 25% refund Academic Grievance:
• Over 20% of the program hours completed = no refund We anticipate that each adult learner’s educational experience will be a
• Refunds take approximately 4 – 6 weeks for processing positive and successful one. The CWD Adult Learner Handbook details
Any outstanding balances will be billed to the adult learner within 30 days of the procedures to follow when the adult learner believes they have
program withdrawal. Failure to pay outstanding balances within 60 days of billing experienced a problem that he/she believes will interfere with their
will result in outstanding balances being sent to a third party debt collector. academic success.
JOB TRAINING 2021-22 PROGRAM SCHEDULE
See detailed course descriptions on pages 9-11
Course Days and Times Total Hours Location 2021-22 START DATES DEADLINE TO ENROLL TUITION
30 HOURS September 7, 2021 August 17, 2021
CWD
CDL-B Commercial Driver License T 5:30-8:30 p.m. 10 WEEKS January 11, 2022 December 21, 2021 $1,850
Main Office
+ 12 HOUR DRIVE TIME April 19, 2022 March 29, 2022
Culinary T 6:00-10:00 p.m. Plus 4-hours 104 HOURS September 7, 2021 August 17, 2021
WEMOCO $2,700
See description on page 17 weekly remote assignments 13 WEEKS February 15, 2022 January 25, 2022
M, T, W 8:30 a.m.-3:00 p.m. 902 HOURS September 27, 2021 September 7, 2021
Dental Assistant WEMOCO $9,200
Plus 6 hours on-line remote study 28 WEEKS January 31, 2022 January 10, 2022
HVAC/R Technician: Heating, 600 HOURS September 13, 2021 August 23, 2021
Ventilation and Air Conditioning M-F 8:30 a.m.-3:00 p.m. WEMOCO $8,900
and Refrigeration 21 WEEKS February 14, 2022 January 24, 2022
600 HOURS CWD September 13, 2021 August 23, 2021
Medical Office Assistant M-F 8:30 a.m.-3:00 p.m. $6,950
20 WEEKS Main Office February 28, 2022 February 7, 2022
September 20, 2021 August 30, 2021
M, T, Th 10 a.m.-2p.m. OR 160 HOURS CWD
Nurse Assistant February 14, 2022 January 24, 2022 $2,650
M, T, Th 5-9p.m. 14 WEEKS Main Office
June 6, 2022 May 16, 2022
September 7, 2021 August 17, 2021
124 HOURS CWD
Phlebotomy and Lab Services T,W, Th 5:30-8:30 p.m. February 8, 2022 January 18, 2022 $2,500
14 WEEKS Main Office
May 24, 2022 May 3, 2022
Many Job training programs include a Work-based Activity Veteran Approved Training ra
n-A
pproved T
ra
during the last weeks of the program. This allows students to Several of the CWD Job Training programs are
e
ini
Vet
ng
apply newly-acquired skills in the field with one of our leading Veteran Approved Trainings- look for this symbol!
industry partners. Prerequisite: HS Diploma or Equivalency
8
Job Training Programs
Health Careers Medical Office Assistant
Don’t let your job flatline,
Dental Assistant get a new career, STAT!
Do you enjoy making people smile? Consider
A successful Medical Office Assistant utilizes
a career as a dental assistant. Students will gain
both clinical and administrative medical skills.
knowledge and hands-on experience in all
Students will learn medical terminology,
dental specialties, including dental anatomy/
medical assisting techniques, coding/billing and documenting
terminology, instrument care/use and chair-side
a patient’s vital signs and medical history. In addition, this
procedures in a real-life dental lab environment with anatomically
program will include introductory Microsoft Office applications,
correct prosthetics and appropriate office equipment.
general office skills, customer service/communication
Course details: techniques, phone/email etiquette, as well as Employment Skills
• 902-hour training (including 240-hour internship/Work-based Development.
Activity.)
Course details:
• Supportive learning environment • 600 hour/20 week training (includes 4-week internship/Work-
• Monday-Thursday, 8:30 a.m.-3 p.m. with supplementary on-line based Activity)
assignments • Supportive learning environment
• Fee: $9,200 (textbooks and jacket included) • Monday-Friday, 8:30 a.m.-3 p.m.
• Clinical Experience: sites may include the Eastman Dental Center, • Fee: $6,950 (textbooks included)
Rochester General Hospital, and various private practices. Hours
• 20-week program (600 total hours)
Mon.-Fri., 8:30 a.m. - 5 p.m. or varied depending on site.
• Eligibility: High School Diploma or Equivalency and successful
• Eligibility: High School Diploma or Equivalency and successful
completion of TABE assessment required for admission
completion of TABE assessment required for admission
• Personal computer access not required for participation in this
• Personal computer access required for participation in this course
course
for on-line assignments
Course Components:
Course Components:
• Clinical Skills - medical history, vital statistics, prepare treatment
• Clinical Skills - dental anatomy and terminology, instrument care/
rooms, interview patients
use, chairside procedures
• Administrative Skills - coding, billing, bookkeeping, medical
• Professionalism - confidence, communications, dependability
insurance, medical reports
• Employment Preparation - resumes, job search support
• Business Skills - Microsoft Office Word, Excel, PPT, keyboarding,
• Work-based Activity/Internship - build your resume, add to your data entry
experience and put your new skills into practice in a dental office;
• Professionalism - confidence, communications, dependability
240 hours with varying schedule, instructor supported
• Employment Preparation - resumes, job search support
• Successful completion qualifies students to take DANB exams and
become an RDA in NY State • Work-based Activity/Internship - build your resume, add to your
experience and put your new skills into practice in a medical
Outlook for Dental Assistants: Potential Employment office; 4-weeks (included in 600 hour total), instructor supported
• Visit O-Net Online and the Bureau positions:
of Labor Statistics for details on • Dental Assistant Outlook for Medical Office Potential Employment
how Dental Assistant and related • Hygiene Assistant Assistants: positions:
positions fare in today’s job market: • Dental Sterilization • Visit O-Net Online and the Bureau • Access Associate
www.onetonline.org (Bright Outlook Technician of Labor Statistics for details on how • Clinical Medical
thru 2028, 7% higher than other • Oral Surgery Assistant Medical Office Assistant and related Assistant
occupations) • Orthodontic Assistant positions fare in today’s job market: • Biller
www.bls.gov/SOC Standard www.onetonline.org (Bright Outlook • Perioperative
Occupational Code: 31-9091 thru 2028, 11% higher than other Assistant
occupations)
• Scanning Technician
NY State License-Qualifying Program: meets NY State educational requirements towards www.bls.gov/SOC Standard
• Medical Secretary
NY State Dental Assistant License Occupational Code: 31-9092
NY State Education – Approved Program ra
n-A
pproved T
ra
e
ini
Graduation Rate: 97%
Vet
ng
Job Placement Rate: 100% (in training-related jobs) NY State Education – Approved Program n-A
pproved T
Graduation Rate: 90%
ra
ra
Council on Occupational Education-Approved Program
e
ini
Vet
ng
Job Placement Rate: 100% (in training-related jobs)
NOTE: Participants are responsible for their own transportation and Council on Occupational Education-Approved Program
parking fees while at work-based activity. Starts: See schedule on page 8
Starts: See schedule on page 8 Location: WEMOCO CTE Center Location: CWD Main Office
9
Job Training Programs
Nurse Assistant - Day And Evening Programs Phlebotomy & Lab Services
Support offered to English for Speakers of Are you ready to take ‘A Positive’ step toward a new career
Other Languages participants (ESOL**) in phlebotomy? Don’t ‘B Negative!’
This NY State Education-approved program prepares students Phlebotomy is an ideal occupation for anyone interested
to provide safety and comfort for patients/residents in Skilled in working in the healthcare industry. Topics such as the
Nursing Care Facilities. Instruction includes Job Roles, Patient role of the phlebotomist, patient identification, collection
Communication, Body Mechanics, Infection Control, Hygiene/ and preparation of blood and body fluid specimens, and
Grooming, Nutrition/Exercise, Dementia and End of Life Care. maintenance of records and collection areas will be covered.
Students will also complete a Clinical Work-based Activity within a Anatomically correct arms, prosthetics and human blood
healthcare facility. Successful students will have the opportunity to draws are used in this program.
take the NY State certification exam: Prometric.
Course details: Course details:
• 150+ hour training program (includes 30-hour hands-on experience • 124-hour training
in a skilled nursing facility under guidance of a Registered Nurse) • Supportive learning environment
• Supportive learning environment • Tuesday, Wednesday, Thursday, 5:30-8:30 p.m.
• Mon., Tues., Thurs. 10 a.m.-2 p.m. OR 5-9 p.m. for all participants • Fee: $2,500 (textbooks and supplies included)
• Clinical hours extended to 9 a.m.-2 p.m. OR 4-9 p.m. • Eligibility: High School Diploma or Equivalency and successful
• ESOL Students also attend Wed., Fri., 10 a.m.-2 p.m. OR 5-9 p.m. completion of TABE assessment required for admission
• Fee: $2,650 (textbooks, uniform included) • Personal computer access NOT required for this course
• Eligibility: Successful completion of TABE assessment required for Course Components:
admission • Clinical Skills - collection and preparation of blood and bodily
• Personal computer access NOT required for this course fluid specimens
Course Components: • Administrative Skills - maintenance of records
• Clinical Skills - complete and partial bed bath, mouth/denture care,
ambulation, catheter care, taking vital signs and more • Professionalism - confidence, communications, dependability
• Professionalism - confidence, communications, dependability • Employment Preparation - resumes, job search support
• Employment Preparation - resumes, job search support
• Work-based Activity/Internship Skills - build confidence and your Outlook for Phlebotomists: Potential Employment
resume, instructor-supported, in a skilled nursing facility • Visit O-Net Online and the positions:
**The ESOL program provides additional instructor support to English Language Bureau of Labor Statistics for
Learners in addition to the Nurse Assistant coursework and class schedule. • Phlebotomist
details on how Phlebotomists
• Patient Care
Outlook for Nurse Assistants: Potential and related positions fare in
Technician
• Visit O-Net Online and the Bureau Employment today’s job market:
positions: • Specimen Processor
of Labor Statistics for details on how www.onetonline.org (Bright
Nurse Assistant and related positions • Nurse Assistant • Mobile Phlebotomist
Outlook thru 2028, 11% higher
fare in today’s job market: in Skilled Nursing than other occupations)
www.onetonline.org (Bright Outlook thru Facility www.bls.gov/SOC Standard
2028, 11% higher than other occupations) • Patient Care Occupational Code: 31-9097
www.bls.gov/SOC Standard Occupational Technician (with
Code: 31-1014 additional training) NY State Education – Approved Program
Graduation Rate: 100%
NY State Education – Approved Program Job Placement Rate: 90% (in training-related jobs)
Graduation Rate: 78% ra
n-A
pproved T
ra
Council on Occupational Education-Approved Program ra
n-A
pproved T
ra
e
ini
Job Placement Rate: 75% (in training-related jobs)
Vet
e
ini
ng
Vet
ng
Starts: See schedule on page 8
Council on Occupational Education-Approved Program Location: CWD Main Office
Starts: See schedule on page 8
Location: CWD Main Office
Practical Nursing (LPN) Program
The Genesee Valley BOCES School of Practical Nursing is a New York State Education Department certified program
designed to prepare graduates for the NCLEX-PN Examination for licensure as Licensed Practical Nurse. This program is
offered at three (3) different site locations: Batavia, Rochester Tech Park (Gates), and Mount Morris. Health care facilities
to complete clinical requirements are located throughout the Rochester Area, as well as, Genesee, Wyoming, and
Livingston counties. Visit O-NET Online and the Bureau of Labor statistics to for details on how a career as an LPN or
licensed vocational nurses are expected to grow.
There is now an easy to use computerized application and admission testing process through our website! To apply, or for more
information, visit www.gvboces.org under the Adult Education tab or call (585) 344-7788
Job Placement Rate: 100% (2018-19); after passing NCLEX examination
12-months (1,200 total hours) Fee: $14,900 Starts: October, 2021 and Winter, 2022
10Job Training Programs
Skilled Trades Careers CDL Commercial Driver’s License Class B
Let’s get you on the road to a new career
HVAC/R Technician with a Commercial Driver’s License (CDL).
Don’t let your career go cold. The Finger Lakes region continues to see
Warm up your skills and enter the field of high demand for professional drivers!
Heating, Ventilation, Air Conditioning & Through successful completion of the course
Refrigeration. Learn how to safely and properly you will have the ability to step into any
install, troubleshoot, service and repair automatic transmission school bus, passenger
all types of residential and light commercial HVAC systems. bus, straight truck, box truck, or dump truck while earning your
This program will include customer service/communication Passenger, and School Bus endorsements.
techniques, phone/email etiquette, as well as Employment Skills Course details:
Development. • 30-hour in class training program, plus 12-hour 1-on-1 drive time
Course details: with instructor
• 21-week training, 600 hours (includes 3-week Work-based • Supportive learning environment
Activity/Internship) • Tuesday, 5:30-8:30 p.m.
• Supportive learning environment • Fee: $1,850 Automatic Transmission only (includes passenger and
• Monday - Friday, 8:30 a.m.-3 p.m. school bus endorsements)
• Fee: $8,900 (textbooks and exam fees included) • Eligibility: 18 years of age or older *, a clean and valid NYS
Driver’s License, a passing DOT physical , a valid CDL Class B
• Eligibility: High School Diploma or Equivalency and successful
Learners Permit** and successful completion of TABE assessment
completion of TABE assessment required for admission
required for admission.
• Personal computer access NOT required for participation in this
• *Must be 21 years old to drive a school bus
course
• ** Students are encouraged to pass the additional required
Course Components:
permit endorsements prior to the start of class, but alternatively
• Technical Skills - Installation, service, repair and trouble shooting
may complete them during the class: Air Brake, Passenger and
• Industry Certifications - training and testing included for EPA 608, School Bus.
R410-A, OSHA 10, Forklift, Green Awareness
Course Components:
• Professionalism - confidence, communications, dependability • Driving/Road Skills - Basic maintenance for class B vehicles, how
• Employment Preparation - resumes, job search support to drive/park class B vehicles, Safety procedures for school bus
• Work-based Activity/Internship; build your resume, add to your endorsement
experience and put your new skills into practice riding along • Professionalism - confidence, communications, dependability
with an experienced technician. Experience real world repairs, • Employment Preparation - resumes, job search support
installation, and most importantly, become familiar with the “life”
of a service technician in a residential or commercial setting.
Outlook for CDL-B Drivers: Potential Employment
Outlook for HVAC/R Technicians: Potential Employment • Visit O-Net Online and the Bureau positions:
Visit O-Net Online and the Bureau positions: of Labor Statistics for details on how • Bus Driver
of Labor Statistics for details on how • Air Conditioning CDL-B drivers and related positions • Medical Transport
HVAC Technician and related positions Technician fare in today’s job market: Drivers
fare in today’s job market: • HVAC Salesperson www.onetonline.org (Bright Outlook • Delivery Service
www.onetonline.org Bright Outlook • HVAC Installer thru 2028, 11% higher than other Drivers
thru 2028, 7% higher than other • HVAC Service occupations)
occupations! Technician www.bls.gov/SOC Standard
www.bls.gov/SOC Standard • HVAC Mechanic Occupational Code: 31-3032
Occupational Code: 31-9021
NY State Education – Approved Program
Graduation Rate:100%
NY State Education – Approved Program pproved T
Job Placement Rate: 86% (in training-related jobs)
Graduation Rate: 90%
n-A ra
ra
e
ini
Starts: See schedule on page 8 Location: TBD
Vet
ng
Job Placement Rate: 91% (in training-related jobs)
Council on Occupational Education-Approved Program
Starts: See schedule on page 8
Location: WEMOCO CTE Center
NOTE: Every effort is made to conduct classes as listed on our webpage or in our catalog. Circumstances may make it necessary for classes to
be canceled or postponed, or for instructors and classrooms to be changed. Please contact the admissions team for further information.
11Part-Time/Continuing Education Programs
Our continuing education programs are part-time courses Registration
that offer individuals a convenient and affordable way to
All registration closes four (4) days prior to start date.
upgrade their current skills, or pursue an interest or hobby.
New learning opportunities are added regularly!
These courses are offered during evening and Saturday
Please see our website for details, start dates and refund policy.
hours to accommodate the needs of the adult learner.
How to Register:
Online NOTE: Every effort is made to conduct classes as listed on our
webpage or in our catalog. Circumstances may make it necessary
www.monroe2cwd.edu/continuing-education
for classes to be canceled or postponed, or for instructors and
ce classrooms to be changed.
Phone No Entran t All program offerings must reach a minimum enrollment at least
e ss m e n
(585)349-9100 Ass four business days prior to the start of the first scheduled class. If
-R gister
e
Required day! it is necessary to delay the start of a program you will be notified
In-Person Online to and have the option to enroll at another date, take a similar
offering, or request a refund.
at CWD Main Office between
8 a.m. - 4 p.m., Mon. – Fri.
Scholarships/Vouchers Tuition and schedules subject to change.
accepted from community agencies
Continuing Education Programs Policies
• Every effort is made to conduct classes as listed on our webpage or • Credit Cards (VISA/Master Card), Check (Payable to Monroe 2
in our catalog. Circumstances may make it necessary for classes to BOCES), Money Order and cash are acceptable forms of payment
be canceled or postponed, or for instructors and classrooms to be for registration, books and supplies.
changed.
• Corporate Billing is available. Tuition vouchers are accepted.
• All programs must reach a minimum enrollment at least four
business days prior to the start of the first scheduled class. If it is • Refund/Withdrawals:
necessary to delay the start of a program you will be notified and o Full Refund: A written request to withdraw from the course
have the option to enroll at another date, take a similar offering, or must be received by the CWD office no later than five (5)
request a refund. business days prior to the first scheduled day of class.
• Any individual 17 years of age or older may register for part-time o Partial Refund: A percentage of the program tuition will be
courses. High School students must be at least 17 years of age refunded depending on the amount of notice received, less a
and have written permission from their Principal or Guidance $50 processing fee.
Counselor.
o Notice less than five (5) school days prior to the start of the
• Participants are registered on a first come, first served basis, and first scheduled class = 90% refund
registration is confirmed upon receipt of payment.
o Notice after the first class and at least twenty-four (24) hours
• Registration acknowledgments are emailed. Note the scheduled prior to the scheduled date of the second class = 75% refund
date of the first class meeting.
o Notice after the second class = no refunds
• Registration fees do not include books or supplies.
o Refunds take approximately 4 – 6 weeks for processing.
• Certificates of Completion will be issued to students who have
maintained at least 80% attendance and have shown successful
completion of the skills and aptitudes necessary for course
completion as determined by a passing grade from the instructor.
Please visit the CWD website and the Adult Learner Handbook for complete and comprehensive program policies.
CWD Certificate Series Programs: Electrical, HVAC, and Welding
A Certificate Program is a series of continuing education classes that provide in-depth study and are taught by industry professionals.
Certificate programs are ideal for busy adults who are beginning a new career path, considering a career change, honing their
current skills, or pursuing a passion and are aligned to industry-recognized credentials, accreditation exams, or meet state-mandated
requirements for continuing education. The classes are flexible, offered part-time, and are noncredit-bearing courses of study with no
entrance requirements.
12Part-Time/Continuing Education Programs
Total
Course Days and Times Cost Fall Winter Spring
Hours
Test Preparation Courses – CWD Main Office, 3555 Buffalo Road, Rochester, NY
Trade Math: Required for Electrical, HVAC,
M 5:30 - 9:30 p.m. 4 $149 open enrollment open enrollment open enrollment
Machining & Welding certificate courses.
ASVAB Preparation M 5:30 - 9:30 p.m. 8 $149 open enrollment open enrollment open enrollment
Practical Nursing (LPN) Preparation Varies 16 $275 TBD TBD TBD
Continuing Education Courses – WEMOCO CTE Center, 3589 Big Ridge Road, Spencerport, NY
Auto Body Sat 8:30 am - 2:30 pm 42 S499 9/25/21 - 11/6/21 1/22/22-3/5/22 4/23/22 - 6/4/22
Electrical Introduction AC/DC M/W 6 - 9 pm 54 $459 9/13/21 - 11/15/21 1/24/22 - 3/28/22 4/18/22 - 6/20/22
Electrical-Residential Wiring T/Th 6 - 9 pm 48 $499 9/14/21 - 11/11/21 1/18/22 - 3/3/22 4/26/22 - 6/16/22
Electrical-Industrial M/W 6 - 9 pm 54 $579 9/13/21 - 11/15/21 1/18/22 - 3/17/22 4/26/22 - 6/17/22
EPA 608 Certification (Section 608) Online Online $129 open enrollment open enrollment open enrollment
EPA 608 Certification (Section 608) Prep & Test Sat 8:30 am - 12:30 pm 12 $179 open enrollment open enrollment open enrollment
Forklift Training Sat 9 am - 2:30 pm 5.5 $139 open enrollment open enrollment open enrollment
Home Remodeling Section 1 (Framing & Drywall) M/W 6 - 9 pm 18 $199 9/13/21 - 9/29/21 1/19/22 - 2/7/22 4/18/22 - 5/4/22
Home Remodeling Section 2
M/W 6 - 9 pm 21 $229 10/4/21 - 10/27/21 2/14/22 - 3/9/22 5/11/22 - 6/6/22
(Floors, Windows, Doors)
Home Remodeling Section 3
M/W 6 - 9 pm 18 $199 11/1/21 - 11/17/21 3/16/22 - 4/4/22 6/8/22 - 6/27/22
(Electrical & Plumbing)
HVAC 1-Air Conditioning Systems T/Th 6 - 9 pm 36 $399 9/14/21 - 10/21/21 1/18/22 - 2/24/22 4/19/22 - 5/26/22
HVAC 2- Refrigeration T/Th 6 - 9 pm 24 $299 10/26/21 - 11/18/21 3/3/22 - 3/29/22 6/2/22 - 6/28/22
HVAC 3-Heating Systems M/W 6 - 9 pm 36 $399 9/27/21 - 11/8/21 2/7/22 - 3/21/22 5/9/22 - 6/20/22
OSHA Online $89 Online Online Online
Small Engine Repair W 6 - 9 pm 24 $259 9/22/21 - 11/10/21 1/26/22 - 3/16/22 5/9/22 - 6/15/22
Welding Introduction T/Th 6 - 9 pm 30 $349 9/21/21 - 10/21/21 1/25/22 - 2/24/22 4/19/22 - 5/19/22
Welding MIG T/Th 6 - 9 pm 24 $299 10/26/21 - 11/18/21 3/3/22 - 3/29/22 5/26/22 - 6/21/22
Welding STICK M/W 6 - 9 pm 30 $299 9/29/21-11/3/21 2/14/22 - 3/21/22 5/2/22 - 6/6/22
Welding TIG M/W 6 - 9 pm 42 $459 9/29/21-11/17/21 2/14/22 - 4/4/22 5/2/22 - 6/20/22
Woodworking Section 1 T/Th 6 - 9 pm 24 $259 9/21/21 - 10/14/21 1/18/22 - 2/10/22 4/26/22 - 5/19/22
Woodworking Section 2 T/Th 6 - 9 pm 24 $259 10/19/21 - 11/18/21 2/17/22 - 3/24/22 5/26/22 - 6/21/22
Register Online at www.monroe2cwd.edu/continuing-education-courses/
13Part-Time/Continuing Education Programs
Auto Body
Test Preparation Courses This class has been
redesigned with both the
Trade Math beginner and returning or
This class is ideal for advanced Auto Body student
those students seeking to in mind. Your instructor will
refresh their foundational design a training program
math skills prior to specifically for you based
exploring programs in on your experience and
the skilled construction expectations. After taking this
trades or advanced class once, you will want to
manufacturing. This come back for more! (Students must purchase safety glasses).
course develops student’s foundational success for a number Total program hours: 42
of our Adult Training Programs, by developing mathematical
reasoning skills and problem solving while appropriately Electrical – Industrial
applying math to real world situations. The course will provide
This course is designed
a review of basic arithmetic functions, integers, fractions,
to introduce you to single
decimals, percents, ratios and proportions, and measurement
and three phase power
using metric and standard conversions. Also, basic geometry
distribution, basic motor
and trigonometry will be reviewed. Required for Electrical,
controllers, starters, relays,
HVAC, & Welding certificate series courses. Total program
and wiring standards. It will
hours: 4
prepare you to continue in
PLEASE NOTE: Minimum enrollment of 4 must be met to hold any skilled trades programs
the Trade Math course. When minimum enrollment has been and give you a basic
met, applicants will be contacted with the course start date. understanding of industrial
Classes are held Mondays (5:30-9:30 p.m.). power distribution. Total program hours: 54
ASVAB Preparation Electrical – Intro AC/DC
The Armed Services Vocational Aptitude Battery is a test Introduce yourself to
administered by the United States Military Entrance Processing the fundamentals of
Command to determine qualification for enlistment in the electricity. Designed for
United States Armed Forces. This test preparation class anyone thinking of a career
will help enhance the necessary skills in the areas of word change, job enhancement
knowledge, arithmetic reasoning and math knowledge, as well or just to acquire a
as paragraph comprehension, general science and logical better understanding of
reasoning. Total program hours: 8 electricity and electronics.
PLEASE NOTE: Minimum enrollment of 4 must be met to hold Topics include - electrical
the ASVAB Preparation Course. When minimum enrollment has components, their uses and
been met, applicants will be contacted with the course start symbols, electronic circuit
date. Classes are held Mondays (5:30-9:30 p.m.). identification and elements, Ohms law, resistor color codes and test
equipment. PLUS “hands on” experimentation with basic electrical
circuits. Total program hours: 54
Practical Nursing (LPN) Preparation Course:
Increase your readiness for a local Practical Nursing program.
This course is an overview of the subject matter necessary
Electrical-Residential Wiring
to pass an LPN entrance exam and begin an LPN program Discover the methods of
successfully. It will installing home wiring,
include reading, writing, circuit layout and design,
and math skills, as found component installation and
on area LPN program code requirements based
entrance exams, as upon the latest national
well as basic medical codes. When completed,
terminology, anatomy, you will be able to maintain
and pharmacology, existing electrical circuits and
to give the student an install basic wiring in existing
advantage as they begin and new structures.
their program. Total Total program hours: 48
Program Hours: 16
14Part-Time/Continuing Education Programs
Forklift Training HVAC-EPA Certification (Section 608) Online
The forklift certification class This program is an EPA approved certification program and meets
includes classroom theory the requirements set forth in SECTION 608 of the Clean Air Act, as
and practical evaluations. regulated by the United States Environmental Protection Agency
You will review legislation (EPA). We are also an approved test site. This program allows the
relating to the OSHA individual to study at their own pace with materials provided by us.
(Occupational Safety and The information is the same as if you were attending class.
Health Administration.) The The information covers an introduction to Basic Principals of
instructor will list specific Refrigeration for CORE, Type I, Type II and Type III Certifications.
driving rules for you to When you are ready to take your test, you will need to contact us.
use and follow. The course A test date will be set up for you with one of our Proctors. (Fee
involves review and testing both written and practical. The practical includes: Study materials, PowerPoint and Testing Fees.)
portion of the test takes about 15 minutes per student. Upon
completion of the program you will be issued a wallet size certificate
of completion. Classes are held outside - come dressed for the HVAC-EPA Certification (Section 608) Prep & Test
weather. No lunch provided. No driver license required. This 12-hour, instructor lead course covers all essential material to
Total program hours: 5.5 prepare and successfully complete the EPA certification test to meet
the requirements set forth in SECTION 608 of the Clean Air Act, as
regulated by the United States Environmental Protection Agency
Home Remodeling 1: Framing & Drywall (EPA). The information covers an introduction to Basic Principals
In Home Remodeling 1 you will of Refrigeration for CORE, Type I, Type II and Type III Certifications.
receive hands on instruction Three hours will be allowed for testing. (Fee includes: Study
with tools and materials materials, PowerPoint and Testing Fees.) Total program hours: 12
required to work with wall
framing and drywall. You will
learn how to frame walls, HVAC-1: Air Conditioning Systems
hang and install new drywall, In HVAC-1, you will
repair/remove damaged areas be introduced to Air
and how to finish the new or Conditioning Systems.
repaired drywall. The course emphasizes
Total program hours: 18 the fundamentals of air
conditioning, and knowledge
of the tools and materials
Home Remodeling 2: Floors, Windows, Doors needed to repair the
This course expands on the fundamentals of Home Remodeling electrical/mechanical portion
1, by teaching you the fundamentals of how to prepare and install of the A/C system. Learning
ceramic tiling for walls and flooring, hardwood flooring, doors, Objectives include: Cycle of
windows and trim. The appropriate tools and materials will be used, refrigeration, Components
and the importance of site preparation will be covered. You will also of refrigeration system,
learn how to repair or replace hardwood floors using the tongue Heat pumps, Thermostats, Heat loss/heat loads, Residential A/C &
and groove method. Total program hours: 21 refrigeration, and Electric meter training. Total program hours: 36
Home Remodeling 3: Electrical & Plumbing HVAC- 2:
You will receive hands on Refrigeration
instruction with the tools and
HVAC-2 deepens your
materials needed to work
understanding of
with electrical devices. You
refrigeration systems and
will learn how to change a
refrigerants. In addition to
wall socket, light switch, install
the learning objective below,
junction boxes, install lights
you will leave this course
and doorbells, and identify
with the ability to identify
electrical problems that you will
refrigerants according to
be able to repair or when to call
their series number and
an electrician. The plumbing
cylinder color code. Learning
portion of the program introduces you to plumbing concerns around
Objectives include: Pressure/
the home. You will be introduced to the tools and materials required.
temperature relationship, Superheat/subcooling, Proper refrigerant
You will be introduced to copper pipe and how to work with it, PVC
charge, Latent heat/sensible heat, Refrigerant recovery/charging/
and how to work with it; and how to unclog blockages and take care of
evacuation, and System troubleshooting. HVAC-1 is a prerequisite
small repairs. We will also cover the installation and repair of toilets and
for HVAC-2. Total program hours: 24
replacing supply lines and valves. Installation and repair of faucets and
their supply lines and valves will also be covered.
Total program hours: 18
15Part-Time/Continuing Education Programs
HVAC-3: Heating Systems Welding MIG
Learn the basics of gas furnaces, gas controls, properties of gas Learn to weld sheet metal and thicker types of materials
piping, ventilation and combustion, boilers and heat pumps. You will incorporating different joint designs using the gas metal arc welding
also explore advanced controls, design for installing systems, heat process. You will also learn to weld carbon steel material utilizing the
load calculations and troubleshooting. Learning Objectives include: Fluxcore Welding process. You will learn the differences between
Furnace (forced air distribution system), Boiler (Radiator distribution gas and metal arc and Fluxcore Welding, the operation and settings
system), Heat Pump, Hybrid Heating, Ductless Mini-Splits, Radiant of these power supplies. Lectures will incorporate joint designs and
Heating, Baseboard Heaters and Furnace (forced air distribution when to use these processes. You are welcome to bring in your own
system). Total program hours: 36 projects. Auto-darkening hood will be available. Student supplies
gloves and light welding jacket. Total program hours: 24
OSHA Occupational Safety and Health
Administration Welding STICK
Earn your industry recognized credential anytime, anywhere, Shielded metal arc welding
directly from the lower cost online provider. This is an Online OSHA (SMAW), flux shielded arc
10 General Industrial and safety training program. This program welding or informally known
will introduce OSHA policies, procedures, and standards as well as as stick welding, is a manual
general industry safety and health principles covered in the OSHA arc welding process that
ACT part 1910. V uses a consumable electrode
covered with a flux to lay the
• OSHA 10-Hour General Industry (Required for Electrical, HVAC,
weld. In this course you will
Machining & Welding Certificate)
expand on techniques such
• OSHA 10-Hour Construction Industry as vertical up and down,
• OSHA 10-Hour General Industry (Healthcare) practice on overhead and be introduced to hard facing as used
• OSHA 10-Hour General Industry (Agriculture) on much construction equipment. Auto-darkening hood will be
• OSHA 10-Hour General Industry (Automotive) available. Student supplies gloves and light welding jacket.
• OSHA 10-Hour General Industry (Culinary) Total program hours: 30
Small Engine Repair Welding TIG
Combine theory and Learn to weld carbon steel, stainless steel and aluminum in flat,
hands-on experience to vertical and horizontal positions using gas tungsten arc welding
gain the skills you will need process. You will learn the proper operation of the power supply
to repair your gas-powered and torch handle. You are encouraged to bring in your own projects.
equipment. Learn how to Curriculum follows the guidelines of the American Welding Society.
make adjustments, do tune- Auto-darkening hood will be available. Student supplies gloves and
ups, repair lawn mowers, light welding jacket. Total program hours: 42
weed eaters, mini-bikes, snow
blowers, tillers and other 2 Woodworking 1
and 4 cycle engines. This very popular course will help you understand, through hands-
Total program hours: 24 on experience, the fundamentals of woodworking. You will learn
the safe operation of hand, power and stationary woodworking
Welding Introduction tools as you build a small construction project. Learn the basics and
Follow a series of processes that sign up early. This class fills up fast because it provides an excellent
will take you through Oxyacetylene foundation for future woodworking and building trade courses. You
welding and cutting, equipment set- are encouraged to bring in projects which may be of interest to you.
up, shielded metal arc (stick), metal Total program hours: 24
inert gas (MIG), tungsten inert gas
(TIG), single and multiple pass welding Woodworking 2
in all positions. Curriculum follows the This section is the same as
guidelines of the American Society of section 1, for beginner or
Welding. Auto-darkening hood will be advanced students, providing
available. Student supplies gloves and an opportunity for beginner
light welding jacket. or advance students to
Total program hours: 30 continue to work on their
project. Section 1 not a
prerequisite to take Section 2.
Total program hours: 24
New learning opportunities added regularly!
Please see website for details and start dates!
www.monroe2cwd.edu
16Culinary Arts
Kick it up in the Kitchen
CWD is excited to announce the expansion of our culinary offerings! Not only will we continue to offer our popular series of 2-3 hour
Continuing Education classes, we are expanding our offerings to include custom classes designed by YOU! It’s a great way to celebrate
a birthday, anniversary, or just bring friends and family together.
If you’re ready to build a career in the growing local food scene, we’re excited to announce the RE-introduction of our Culinary Job
Training Program See all the details of this 100+ hour program below.
More details on all the great culinary programs offered at CWD can be found below, on pages 18 and 19, and by visiting our website.
Culinary Job Training Program
Custom Culinary Party
Enroll in this comprehensive Job Training course to learn or
hone your skills in Culinary Arts! This program is perfect for We’ll work with you to create custom culinary learning
anyone looking to develop a career in the Culinary Arts but experiences! Want a creative way to celebrate a birthday,
needs a flexible program to do so. This 13-week evening or other special occasion? Maybe you just want to bring
program provides a hybrid learning model that blends high friends and family together. Call us and we’ll work to
impact learning in state-of-the-art industrial grade kitchens create a custom experience just for you!
on campus, with remote assignments that can be completed *minimum of 6-participants required
in the comfort of your own home. Participants will also have **Alcohol not allowed on school premises
an opportunity to pursue employment with selected Industry
Leaders in the Region.
Culinary classes make for great corporate
Course details: team building experiences! Call us Did
• 104-hour, 13-week training, (includes 4-day Work-based Activity/ now to coordinate your next staff you
development event!! know?
Internship in the final week)
*minimum of 6-participants required
• Supportive learning environment
**Alcohol not allowed on school premises
• Tuesday evenings, 6:00 p.m.-10:00 p.m. and up to 4-hours each
week of remote at-home cooking assignments (supplies provided)
Course Total Hours Cost
• Fee: $2,700
• Uniform & Knife Kit provided with Enrollment Cheesecake Workshop 2hr $45
• Successful completion of TABE assessment required for admission
• Personal computer access not required for participation in this course Chef’s Table 3hr $65
• Job Training Program Policies; please refer to page 8
Cookie Exchange 2hr $45
Course Components:
• Kitchen Safety and Sanitation Mediterranean 2hr $45
• Traditional knife skills
• Methods of Preparation Knife Skills 2hr $45
• Menu Creation and Costing Pizza-Palooza 2hr $45
• ServSafe Certification
2hr $45
• Professionalism- confidence, communications, dependability Pasta-Palooza
2hr $45
• Employment Preparation- resumes, job search support
Seasonal Pies 2hr $45
Outlook for Culinary Arts Potential Employment Taco Heaven 2hr $45
graduates: positions:
• Visit O-Net Online and the Bureau • Line Cook
Thai Cuisine 2hr $45
of Labor Statistics for details on • Prep Cook
how Culinary and related positions
• Short Order Cook Whole Food 2hr $45
fare in today’s job market:
• Swing Cook
www.onetonline.org
Please check our website for Culinary Continuing
www.bls.gov/SOC Standard
Occupational Code: 35-2014 Education course date and times!
A minimum of 6 participants is required to run a course.
Starts: Location: WEMOCO CTE Center
17You can also read
