Cabinet Connectors - Titus Group Technical catalogue
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Titus Group
Technical catalogue
Cabinet
Connectors
2022
Important Information Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Due to constant improvement of products presented in the catalogue, we can make changes at any time and without notice. Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the ‘know how’ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. *Non preferred articles All Item numbers in the catalogue marked with * are for non preferred items available on extended delivery times. Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.
Cabinet Connectors
Product Guide
Page
System 1
Fittings for rigid assembly systems a highly cost-effective 1.9
and rigid assembly system
for factory, consumer
and home assembly
System 2
Fittings for face-boring applications face boring applications that 1.12
provide a tolerant efficient
assembly
System 3
Fittings for face and edge boring two component rigid face 1.13
and edge drilling fastening
System 4
Fittings for face-boring only a range of low-cost one-piece 1.15
fittings for high volume home
assembly applications
System 5
Cams and dowels a comprehensive range 1.19
of cam and dowel connecting
fittings for all cabinet
applications
1.3
Cabinet Connectors
Page
System 6
Quickfit-Expando connectors face boring expanding 1.41
connectors for all cabinet
applications
System 7
Heavy duty cams and dowels high quality fittings for offices 1.50
and public furniture
1.4
Connectors
Information
Why Choose Titus?
Titus connectors add value Titus connectors improve the quality
to furniture and to furniture of furniture and lower the cost
of manufacturing and assembly
manufacturing while ensuring a high degree
of customer satisfaction.
The most advanced Precise and efficient product design. Quickfit for hand dowel insertion.
range of connectors The broadest possible range of Quickfit TL5, new generation steel dowel
drilling tolerances ensures reliable with quickfit expando technology for
available on the market assembly and consistently strong joints. insertion in Ø5mm dowel holes.
'Klix' locking feature, the engagement Quickfit TL2, TL4 with the built-in self
of interlocking teeth on cam and adjustment feature for higher drilling
dowel, to prevent joint loosening in tolerances.
service or transit. Quickloc one piece fitting for faster
Expanding function provides degrees assembly with integrated expanding cam
of variation in out-of-tolerance drillings and dowel.
ensuring stronger joints and improved Zinc+steel dowel for optimal strength and
quality of furniture. performance.
Twinstart thread for faster and more Precise dowel manufacturing
stable insertion. high precision of zinc and strength of steel
Depth stop collar prevents over-insertion. assures 100% dimensional accuracy.
Firm tightening for greater confidence
in use.
Cam locks at 230° assuring smooth
tightening action and greater dowel
pull-up.
Easy and quick consumer Self-assembly furniture offers consumers Titus connectors provide consumers with
friendly self-assembly good value and instant availability of easy assembly and furniture producers with
products. increased productivity:
of furniture · reduced number of assembly parts
With the aim of providing consumer with · e
asy assembly instructions
simpler instructions, fewer parts and · security of packed parts during transit
an easier assembly process, Titus has
significantly reduced and simplified the
number of fittings traditionally required in
furniture production.
1.5Connectors
Information
Cabinet Connectors
Easy and Quick Furniture Assembly
CAF formula CAF=Consumer Assembly Friendliness
Titus CAF formula provides While offering consumers easier and faster
a comparative measure for customer assembly, there are obvious advantages
satisfaction. By using it manufacturers are also for furniture manufacturers – buying,
able to evaluate their products internally or counting, bagging and stocking of fittings
against those of their competitors. can be greatly reduced.
How does it work? Comparative CAF scores
to assemble a hand held
demonstrator
T A N CAF
Connecting screw (traditional assembly) 4 38 3 126
Cam & dowel with single start thread 6 21 4 108
Cam & dowel with twinstart thread 6 15 4 84
Cam & TL2 dowel (self-assembly) 6 7 4 52
Cam & TL2 dowel (factory pre-inserted) 2 3 2 10
Quickloc 2 3 1 5
Fully assembled demonstrator 1 0 1 1
1.6Cabinet
Connectors
extended drilling normal drilling extended drilling
tolerance range tolerance range tolerance range
typical graph of Edge
To Hole Center drilling
mismatches
number of
specimen
-1.0 mm -0.5 mm 0 +0.5 mm +1.0 mm
Consumer Assembly High drilling tolerances Strong and reliable joints
Friendliness - CAF principle
· Optimal cabinet joint even in · High performance joints
·Q
uick assembly with less parts cases of inaccurate drilling · Great cabinet strength even at
and less assembly steps · In-built self adjustment feature ensures repeatable assembly or disassembly
·S
imple instructions perfectly aligned and precise joints · Enhanced resilience even in more
·E
asy and intuitive assembly demanding applications in tall
wardrobes or office furniture
1.7Reliable and Expando function Factory pre-insertion
comfortable locking
·E xpanding sleeve on dowels assures · With Quickfit TL5 and TL2 dowels
· Smooth and firm tightening strong joints and high resistance to · Perfect for RTA market: easier
at 2 o'clock lock pull-out packing and transportation
· Great dowel pull-up for · Firm fixing in the dowel hole · The insertion of cams and
optimal performance · Dowels expand and pull the panels dowels can be automated
· Strong and reliable joint together for the strongest joints using Lama FastFit machine
1.8System 1
Fittings for Rigid
Assembly Systems
System Features
Double locking · Zinc diecast for precision · 2nd ‘lower’ thread pulls against
carcase screw · Titus Double locking carcase screw a ‘faster’ thread to provide maximum
makes an almost invisible connection connection force and prevents
· Collar under the head to pull panels overdriving of fastener
together · Almost invisible in position
· Head can be ‘fastcapped’ or filled
Hi-Lo™ carcase The Hi-Lo™ carcase construction · ‘Hi’ thread gives low bursting
construction screw (CCS) offers a strong, tolerant component force from the sharp 30
and cost effective connection with degree angle thread
screw minimal panel preparation. · Lo’ thread at 60 degree angle uses
the vertical force component to press
The combination effect of the elements fibrous and particle components of
of a Hi-Lo™ screw means panels onto the ‘Hi’ thread and are
· A greater differential between drive contained by their greater height
torque and strip torque in fibrous and · The very small shank on a
particle materials to ensure a reliable Hi-Lo™ screw means less material
and repeatable fixing displacement than conventional
· Hi-Lo™ threads provide minimum threads and enables minimum
bursting forces or partial drilling of pilot holes for
speedier panel processing
Barrel nut (plastic) · Used with Titus Hi-Lo™ screws
· Titus barrel nuts provide maximum
strip torque for reasonable drive
torque
· Capable of multiple reconnection
repeatability
Cover caps · Available in multiple colors
· All recess and head types offered
· High quality engineering polymers
used in their construction
· Uniformity of holding with good
tolerance
· Wide range of application and use
conditions
1.9System 1
Fittings for Rigid
Assembly Systems
Double Locking Carcase · High performance from widely spaced primary thread
· Finer secondary thread provides additional holding
Screw power and positive stop (no stripping)
· Increased support for vertical panel is gained from the
funnel head with collar at its base
· One-piece fitting
Cabinet Connectors
Zinc
Technical and
mounting details Item number
Screw 6x42 00180 > 885
42
DRILL HOLE Ř7.0/8.0
TO SUIT BOARD MATERIAL
MIN DEPTH.
30.00
min 30
Ø7/7.5
Ř5.00
15.00
1. DRILLING DETAILS 2. INSERT SCREW TO SHOULDER
IN FACE BOARD.
RILLŘ7.0/8.0
HOLE Ř7.0/8.0 Ø5 15/16
OLE
T BOARD
RD MATERIAL
MATERIAL
MIN DEPTH.
MIN DEPTH.
30.00 30.00
Ř5.00
Ř5.00
15.00 15.00
GRILLING DETAILS
DETAILS 2. INSERT
2. INSERT SCREWSCREW TO SHOULDER
TO SHOULDER
IN FACEINBOARD.
FACE BOARD.
15.00
1.2. INSERT
InsertSCREW
screw TOto shoulder in
SHOULDER 2. S
crew into INTO
3. SCREW Ø5mmŘ5mmhole
HOLE.
INface
FACE board
BOARD.
4. BOARD JOINT PULLED UP 5
BY COLLAR ON SCREW.
SPECIAL SCREW 'APPLICATION DRAWING'
CREW INTO Ř5mm
NTO Ř5mm HOLE. HOLE.
4.3. B4.oard
BOARD BOARDjoint
JOINT pulled
JOINT
PULLED UP up
PULLED UP by 4. 5.
B
oard locked
5. BOARD
BOARD inPLACE
LOCKED
LOCKED IN place by
IN PLACE
BY COLLAR
BY COLLAR
collar ON ON SCREW.
onSCREW.
screw screw BY SCREW.
BY SCREW.
IAL SCREW
REW 'APPLICATION
'APPLICATION DRAWING'
DRAWING'
2000 Pcs Made of zinc
4. BOARD JOINT PULLED UP 5. BOARD LOCKED IN PLACE
BY COLLAR ON SCREW. BY SCREW.
AWING'
1.10System 1
Fittings for Rigid
Assembly Systems
Hi-Lo™ Screw and Barrel Nut
· Hi-Lo™ screws have a twin thread for faster insertion
· ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull out in chipboard
· Funnel head design means no countersinking
· Steel is case hardened for extra strength
A D2
Screw diameter
Total Length
Phosphate
White
Black
Technical and
mounting details Item number
Hi-Lo™ screw 4 20 25 00062 > 852
4 23 28 00068 > 852
Ø7.6
4 28 338 00071 > 852
L
4 33 38 06074 > 852
4 40 45 00077 > 852
Ø3 Ø5
4 50 55 00172 > 852
4 45 50 06077 > 852
9 min
5 45 50 06080 > 852
10000 Pcs (00062)
9000 Pcs (00068)
5000 Pcs (06074)
7000 Pcs (00071)
4000 Pcs (00077)
3000 Pcs (00172, 06077, 06080) Made of steel
Barrel nut 01056 > 835 877
Other colors on request
Ø12x11
7.5/8
B
10000 Pcs Made of plastic
Screw cap pozi, philips 01020 > 835 877
hexagon 01042 > 835 877
Other colors on request
50000 Pcs Made of plastic
1.11System 2
Fittings for Face-boring
Applications
· Range of fixing blocks for multiple applications
· Face drilling only required
· Durable plastic material is flexible providing greater
holding power
· Choose screw fastening or hammer insertion
Cabinet Connectors
11.5
Ø10.6
18 Ø4.5
White
Technical and
16 16
mounting details Item number
32.5
Housing 02077 > 877
(no nose)
17 Ø4.5
17
32
7
13.5
5
10
17 13.5
30
10
2000 Pcs Made of plastic
1.12System 3
Fittings for Face and
Edge Boring
System Features
Titus System 3 is a two component · Automatic or in-factory placement
rigid face and edge drilled fastening · Pre-location pin ensures ease of
with half turn to fasten. System 3 offers assembly
almost full concealment and wide · Less than one turn of a screwdriver
tolerances in use. to fasten
· Shelf edge installation of pin means
maximum shelf cut size tolerance
· Can be used on 12mm shelf panels
· No loose parts for maximum
convenience in RTA
· Drawer front fixing, cabinet construction
1.13System 3
Fittings for Face
and Edge Boring
Concealed Housing
· One turn locking system reduces assembly time, both
in the factory and home
· Pre-assembly feature for consumer convenience
· Choice of dowels to suit drilling
· Hi-Lo screw feature for faster insertion
3168
Cabinet Connectors
C D D2
3180
POZIDRIVE
Drilling diameter
for dowel thread
H
Drilling length
Drilling depth
3121 10
Dark brown
for housing
Zinc plated
3168
for dowel
3118 12
White
Black
Technical and
mounting details Item number
Housing 3180 12.5 03118 > 835 831 877
assembly POZIDRIVE
Ø25 x D
Other colours on request
(Y=9.5 MAX)
X-Y+7
Y
H
X
3168
3121 10
X, 3118 12
Y - depends on board thickness
Ø5 x 30
(Y=9.5 MAX)
X-Y+7
3180
Y
X
POZIDRIVE
Ø25 x D
MAX)MAX)
2500 Pcs Made
H of plastic
ØD2or
x Czinc, plastic
X-Y+7X-Y+7
Y
(Y=9.5
X
3121 10
Screw dowel Ø5 30 5 883
Y
03165 >
(Y=9.5
3118 12
X
Ø5 x 30
(Y=9.5 MAX)
X-Y+7
Y
X
Ø25 x D
X, Y - depends on board thickness
(Y=9.5 MAX)
X-Y+7 X-Y+7
ØD2 x C
Y
X
(Y=9.5 MAX)
Y
X
Ø5 x 30
(Y=9.5 MAX)
1000 Pcs Made of steel
X-Y+7
Y
X
Screw dowel Ø3 25 3 03090 > 883
ØD2 x C
(Y=9.5 MAX)
X-Y+7
Y
X
X, Y - depends on board thickness
2000 Pcs Made of steel
1.14System 4
Fittings for
Face-boring Only
System Features
Cost effective one piece fittings with face · Flush and block components
boring benefits · Face-boring only
· Good tolerances
· One piece connectors
· Angledriv versions fastening with maximum
driving power and flexibility
· Quickloc™ versions need only one turn to
tighten for fast assembly
· Foolproof consumer home insertion
Quickloc™ The integrated housing and dowel make · High degree of drilling tolerance
One-piece connector Quickloc™ the most user-friendly and · Push-in design
tolerant product available. · Tool-free insertion
· Integrated expanding housing and dowel
provide consistently stronger joints
· ‘Klix’ locking system
Quickloc™ Assembly 1. Press Quickloc into the face board 2. Assemble the panels
3. Tighten in less than one turn
1.15System 4
Quickloc™
One Piece Expanding
Connector · An innovative, one-piece connector, capable of hand
insertion
· Highly tolerant and tightens in less than one turn
· Face-bored product
· Offers a high degree of drilling tolerance and is the only
connector of its type to provide pull-up of cabinet panels
when tightened
Cabinet Connectors
Dark brown
White
Black
Technical and
Tan
22mounting details Item number
Quickloc Ø20 06803 > 831 835 877 871
flanged 22
6803
6813
6803 9.5 Ø8
9.5 Ø8
Ø20
4.5
10 Ø8
Ø20
4.5 10
10 Ø8
9.5
10
Ø25
9.5
5
11 Ø10
Ø19.6
2500 Pcs Made of zinc, plastic 13
Quickloc Ø25 6806 Ø19.6
12
06802 > 831 835 877
6813
flanged
6806 11.5 Ø8
11.5 10.5 Ø10
A
Ø8
1
Ø20
6.5
12 Ø8
Ø20
Ø25
6.5 10
12 Ø8
5 9.5
11 Ø10
10
9.5
13
12
1500 Pcs Made of zinc, plastic
10.5 Ø10
A
1
1.16System 4
Fittings for
Face-boring Only
Flushbloc™ / Flushfix™
· The Angeldriv screw provides high level of tolerance
· Face drilling only required
· Corner joint and shelf fixing options
2172 thread - single start
Ø10.6 11.8
2182 thread - twin start
Dark brown
White
Black
Technical and
Zinc
0021 unthumped mounting details Item number
0022 thumped
Flushbloc™ 02190 > 835 831 877
assembly
Other colours on request
2193 27.5
Ø5x13
10
4.5
12
Ø25x11
Ø5x13
2161
27.5
Ø5x13
10
4.5
12
Ø25x11 4.5
12
Ø25x11
Ø5x13
Ø5x13
2500 Pcs Made of plastic 4.5
12
Angeldriv Ø25x11 flat head
4.5 00022 > 855
screw for use
12
with Flushfix™ Ø25x11 Other colours on request
Ø10 Ø6
14.5
19 Ø5x13
4.5
12
Ø25x11
4000 Pcs Made of zinc
1.17System 4
Fittings for
Face-boring Only
Minibloc™ / Twinbloc™
·One-piece connector range
·Face drilling only required
·Easy to use, foolproof home insertion
·Angeldriv screw tolerates good levels of inaccurate
ASSEMBLYdrilling increasing consumer confidence
Cabinet Connectors
16 17
2107 14
2120
10.5
D
Ø10.5
16 17
Drilling depth
Dark brown
13
2141 2144
White
Black
10.5 Technical and
mounting details Item number
Ø8.2
Minibloc Ø10 11 * 02120 > 831 835 877
2130 ASSEMBLY
16 17 17 * Assembly with screw
2107 1414
2120
2139
10.5
10.5
32 Ø10.5 11
Ø10.5
16 17
Ø5 x 10.5
13 Ø10 x D
2141 2144
6
0021 unthumped
10.5 Ø10 Ø6
0022 thumped
14.5
Ø8.2
11
2130
17
Ø10
Ø8 x 13
14
Ø8 x D 2139
9.5 6 10
10.5 278.4129
12 6
32 Ø3
21.5 19 15.5
Ø10.5
11
Ø5 x 10.5
0021 unthumped Ø10 Ø10 x 11 Ø6
0022 thumped
6 14.5
Ø10
9.5
10
278.4129
12 6
Ø3
21.5 19 15.5
2500 Pcs Made of zinc, plastic
Angledriv screw > see page 1.17
1.18System 5
Cams and Dowels
System Features
The most advanced cam Titus System 5 is a comprehensive • Quickfit dowels
range of cam and dowel connecting quick hand insertion, easy assembly
and dowel range fittings with 'Klix' and Quickfit features
for all cabinet applications: • Diecast dowels (zinc)
panel-to-panel, panel-to-hollow profile, precise manufacturing, optimal shape
back-to-back and design
Dowels • Turned dowels (steel)
‘traditional’ design, smooth surface, best
•Q
uickfit TL5, 'Full metal jacket' strength performance
a high performance Quickfit dowel for
use in multiple wooden materials • Combi dowels (zinc and steel)
high precision of zinc, strength of steel,
100% dimensional accuracy and optimal
•Q uickfit TL2, TL4, TL5 dowels
performance
a unique solution for factory pre-insertion,
high level of drilling tolerances
Titus 'Klix'™ Titus 'Klix' locking system ensures the
engagement of the interlocking teeth on
cam and dowel providing:
· vibration-proof joint
· r igid construction that will not loosen in
service or transit
Dowel insertion
time comparison
Twin start thread Single start thread
Quickfit dowel Combi dowel Standard dowel
1 4 7
Second Seconds Seconds
2 o'clock lock Linear cam profile assures smooth, firm
Smooth closing tightening action and greater pull-up. The
cam always locks at 2 o'clock lock (230°),
enabling greater consumer confidence in
use while improving furniture quality.
1.19max.25(29/35) min.23(27/25)
ETHC ETHC
Cabinet Connectors
Tolerance range
Intervallo di tolleranza
Drilling Optimal performance and perfect joint
even with inaccurate drillings.
tolerances
±1 mm
Zinc/Combi min.23.5 (33.5)
Typical
TypicalETCH
ETHC(EDGE TO
(EDGE TO HOLECENTRE)
HOLE
max.25 CENTER)
dowel +/-0.5mm max.24.5(34.5)
ETHC ETHC 20
measurements
measurements
ETHC
18
Occurences
of Occurences
16
14
12 + / - 0.5 mm
Tolerance range Tolerance range 10
Tolerance range
Number of
8
Number
Intervallo di tolleranza 6
Intervallo di tolleranza
4
2
0 23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
ETHC
Quickfit TL5 dowel, Typical ETHC (EDGE TO HOLE CENTRE) Quickfit TL2/TL5
Quickfit TL2/TL5
max.25(29/35) min.23(27/25) measurements
Quickfit TL2 dowel +/-1mm ETHC 20
measurements
ETHC 20
measurements
max.25(29/35) min.23(27/25)
18 18
Number of Occurences
of Occurences
Occurences
ETHC ETHC 16 16
14 14
12 + / - 0.5 mm 12 + / - 1 mm
10
Tolerance rangeTolerance range 10
Number of
8 8
Number
6 Intervallo di tolleranza 6
Tolerance range 4 4
Intervallo di tolleranza 2 2
0 23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
0 23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3 Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
ETHC ETHC
±1 mm
+/-1mm
±1 mm
max.24.5(34.5) min.23.5 (33.5) max.25 min.23
ETHC ETHC
Quickfit TL4 dowel
ETHC
Typical ETHC (EDGE TO HOLE CENTRE)
max.25
ETHC Quickfit TL2/TL5
min.23
Quickfit
QuickfitTL4
TL4
min.23.5 (33.5)
20
measurements
ETHC +/-1mm ETHC20
measurements
ETHC 20
measurements
measurements
18 18 18
Number of Occurences
Number of Occurences
of Occurences
Occurences
16 16 16
14 14 14
12 Tolerance
+ / - 0.5 mm range 12 + / - 1 mm Tolerance range
12 + / - 1 mm
10 Intervallo di tolleranza 10 Tolerance range Intervallo di 10tolleranza
Tolerance range
Number of
8 8 8
Number
6 6 Intervallo di tolleranza 6
4 4 4
2 2 2
0 23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
0 23,0 23,1 23,2
ETHC=Edge To Hole Center
23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
0 23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3 Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3 Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
ETHC ETHC ETHC
Dowels for factory Quickfit TL5 and Quickfit TL2
are the only available dowels allowing
insertion factory preinsertion with
Titus FastFit machine
· E
asier packing
· L
ess damages in handling
· P
erfect for the RTA market
1.20System 5
Cams and Dowels
Cam5000
Highly resistant joint for Reinforced cam evenly engages the hole and
strong cabinet construction prevents cam tilting and cam bursting.
Increased joint resistance enables effective
performance in wider tolerance range.
Linear cam profile Linear cam profile ensures:
· Smooth tightening action
· Greater dowel pull-up
Cam retaining pips Cam retaining pips ensures:
· The cam is held in position prior to assembly
· Secure cam positioning during transport
and handling
· Accurate factory insertion
2 o'clock lock Smooth and noticeable locking at the
2 o'clock position guarantees:
· always-right tightening for home assembly
· strong and rigid cabinet construction
1.21Cabinet Connectors
Optimised cam profile Optimised cam profile ensures smooth and
tight joint with no gap between panels.
Optimal performance with Quickfit TL, Quickfit, Combi, end, double
all Titus dowels ended, angled and other screw-in dowels
1.22System 5
Cams and Dowels
Quickfit Connectors
It is the fastest assembly system on The Quickfit™ range of dowels has been
the market. The Quickfit™ dowel may extended to provide a complete family of
be inserted by hand, using only finger fittings available in diameters of 5mm, 8mm,
pressure. This eliminates the labour 10mm and lenghts of 24mm and 34mm.
intensive process of screw-in assembly These dowels are compatible with the range
and the potential panel damage. of Titus Ø15mm cams.
Assembly 1. Press the cam into face board 2. Insert the dowel into side panel
3. Assemble the panels 4. Tighten the cam to lock dowel
5. Assembled panels
1.23Cabinet Connectors
Quickfit TL Connectors
Quickfit-TL™ dowel offers furniture For the self-assembly furniture
manufacturers a fast assembly system consumer, Titus Quickfit-TL™ is the
providing high drilling tolerances. most consumer friendly fitting on the
It has a built-in self-adjustment feature, market. Apart from the benefit of fully
which enables common drilling tightened joints and easy locking
inaccuracies to be overcome. into the same position, Quickfit-TL™
provides an exceptionally smooth
action when tightened, requiring
very little effort.
Drilling tolerances Marginal inconsistencies of drilling Quickfit-TL™ provides a tolerance of
and the problems associated with the +1/-1mm on drilling operation while
natural movement of wood panels, no ensuring that the final result is a
longer present problems. perfectly precise and aligned joint.
No other assembly fittings system can
offer such tolerances and still maintain
a perfect joint.
1. Press the cam into face board
Assembly
2a. Either push dowel into 2b. Insert the dowel into side panel
edge hole or...
3. Assemble the panels 4. T
ighten cam to lock dowel
1.24System 5
Cams and Dowels
Quickfit TL5 'Full Metal Jacket'
Effective performance Smooth and noticeable locking at the
in multiple wooden materials 2 o'clock position position guarantees:
· tight joints
· always-right tightening at home assembly
Ø5
· strong and rigid cabinet construction
Strong and reliable joint Expanding steel sleeve assures high
resistance to torsion and pull-out.
±1 mm
TL3 35 33
ETHC ETHC
High drilling tolerances An extended dowel head design TL2 max. 25 (35) min. 23 (33)
ETHC
works as a positive stop against ETHC
the cam and provides an ETHC
tolerance of min. +/-1mm
Tolerance range
Fully tightened joint assured even
at marginal inconsistencies of ETHC-Edge To Hole Center
drilling and problems associated
with the natural movement of
wood panels.
extended drilling normal drilling extended drilling
tolerance range tolerance range tolerance range
typical graph of Edge
To Hole Center drilling
mismatches
number of
specimen
-1.0 mm -0.5 mm 0 +0.5 mm +1.0 mm
1.25Cabinet Connectors
Shape of dowel sleeve · Acts as a positive stop when face inserted
· Ensures correct insertion depth
Tool-free insertion for Quickfit TL5 reliably engages the
Ø5mm dowel holes 5mm dowel hole.
It enables the usage of tool-less
Quickfit dowel insertion Ø5
technology across a wide range
of applications.
50% less time to assemble When edge inserted the dowel engages the
the cabinet at home cam and remains securely positioned until
the boards are locked together.
For maximum efficiency the insertion
process can be automated using the Titus
proprietary Lama FastFit machine.
Fast and easy cabinet
assembly at home.
1.26System 5
Cams and Dowels
Zinc+steel Combi Dowels
Zinc+steel The Combi dowel combines steel and
technology for a small amount of zinc to ensure
high precision and dimensional accuracy,
optimal strength essential to provide furniture
and performance manufacturers with the broadest
possible range of drilling tolerances.
toroidal head form
steel neck and head
zinc body
positive stop collar
twinstart thread
The steel neck and head provide Zinc body:
better resistance to torsion and pull-out Positive stop collar ensures correct
enabling a high performance joint insertion depth
Twinstart for faster and more stable
insertion
Cam
small
small bursting
burstingangle
angle
The toroidal dowel head form transfers
the forces between cam and dowel more
effectively resulting in a small cam bursting
force.
Dowel
Dowel
100% dimensional accuracy
assured
e
rat
cu
ac
0%
10
1.27System 5
Quickfit TL5
'Full Metal Jacket'
· Tool-free insertion technology for Ø5mm dowel holes
· Drilling tolerances of +1/-1mm when edge or face
inserted
· Expanding steel sleeve assures a strong joint, highly
resistant to pull-out
· Functions in multiple wooden materials (chipboard, MDF,
solid wood)
Cabinet Connectors
A N T
Drilling distance
Thread length
Drilling depth
Ø5 x 12
Ø8
TeraBlack
Technical and
mounting details Item number
Quickfit TL5 dowel 34 12 11.5 09652 > 956
34
Ø5.5 Ø5.5
24 12 11.5 09651 > 956
T
Ø5 x 12
To be used with Cam5000 only
Ø8
±1 mm
TL3 35 33
ETHC ETHC
A N
TL2 max. 25 (35) min. 23 (33)
ETHC ETHC
Edge to hole
tolerance
Tolerance range
2000 Pcs Made of steel
1.28System 5
Cams and Dowels
Quickfit TL Dowels · Available in Ø5mm and Ø8mm for panel-to-panel
applications
· Suitable for use with all Ø15mm Cam3000 S and
Cam5000 products
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Highly tolerant in edge-inserted, TL4 also in face-inserted
Ø5.8 applications
Quickfit dowel Ø10mm stran 1.30
T
A N T D2
Ø5.8 Quickfit TL4 stran 1.29
T
Drilling distance
Thread length
Drilling depth
dowel thread
diameter for
Dark grey
Ø5.8 Quickfit TL2 stran 1.29
Drilling
Black
Technical and
mounting details T Item number
Quickfit TL2 24 12 11.6 8 05441 > 880
Ø5.8 Quickfit12
dowel11.6
Ø10mm stran 1.30
34 8 05474 > 880
T
ØD2 x 12
Ø5.8 Ø8
±1 mm
Quickfit dowel Ø8mm stran 1.30
T
TL3 max. 25 (29/35) min.23 (27/33)
ETHC ETHC
A N
Ø5.8 Quickfit dowel Ø10mm stran 1.30
TL2 max. 25 (29/35) min.23 (27/25)
ETHC T ETHC
Edge to hole
tolerance
ØD2
Ø8 xx 12
12
Ø8
Ø8
Ø5.8 Quickfit TL4 stran 1.29
Tolerance range
2000 Pcs T
1000 Pcs (05474) Made of zinc, plastic
A
A
Quickfit TL4 24 12 11.2 8 05388 > 835
Ø5.8 Quickfit TL2 stran 1.29
T
Ø8 x 12
Ø8
Ø5.8 Quickfit dowel Ø10mm stran 1.30
T
Ø5.8 A N
Quickfit dowel Ø8mm stran 1.30
T
Hole to hole tolerance
±1 mm
TL3 max. 25 min.23
ETHC ETHC
Edge to hole
tolerance
Tolerance range
3000 Pcs Made of zinc, plastic
TL2 max. 25 (29/35) min.23 (27/25)
ETHC ETHC
1.29System 5
Cams and Dowels
Quickfit Dowels
Quickfit P2F Dowels
Ø5.8
· Available in Ø5mm, Ø8mm and Ø10mm for panel-to-
panel applications
Quickfit
· Suitable dowel
for use Ø10mm
with stran 1.30
all Ø15mm Cam2000, Cam3000
and Cam5000 products
T · ‘Klix’ locking feature provides a strong, vibration proof
joint
· Depth stop collar for accurate insertion
Cabinet Connectors
Ø5.8 Quickfit TL4 stran 1.29
T
A N T D2
A
Quickfit TL2 stran 1.29
Drilling diameter for
Ø5.8
Drilling distance
T
Thread length
Drilling depth
dowel thread
Dark grey
Technical and
Ø5.8 mounting details Quickfit dowel Ø10mm stran 1.30Item number
T
Quickfit dowel A 24 12 11.2 8 05563 > 880
Ø8mm
Ø5.8
Ø5 Quickfit dowel Ø8mm stran 1.30
T
Ø8
12
A
Ø8
Ø8
N
AA
Ø5
ØD2
Ø8
Ø8
12
N
Ø5.8 Quickfit dowel Ø10mm stran 1.30
2000 Pcs Made of zinc, plastic
Quickfit dowel A T 24 12 11.5 10 05052 > 880
Ø10mm
34 12 11.5 10 05050 > 880
Ø5.8 Ø8 Quickfit TL4 stran 1.29
T 34 9.5 9.2 10 05147 > 880
Ø8
N
To be used with Cam5000 only
A
Ø5.8 Quickfit TL2 stran 1.29
T ØD2
Ø8
N
Ø5.8 Quickfit dowel Ø10mm stran 1.30 market only
* American
* Works only with Cam2000
T
Ø5.8
Quickfit dowel Ø8mm stran 1.30
T
2000 Pcs Made of zinc, plastic
1.30System 5
Cams and Dowels
Combi Dowel
· High quality zinc-steel dowel with greater resistance to
torsion and pull-out
· Suitable for use with all Ø12mm and Ø15mm Cam2000,
Cam3000 and Cam5000 products
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Twinstart thread for faster and reliable insertion
A
A N X
T
distance
Thread
Drilling
Drilling
length
depth
Technical and
Zinc
mounting details Item number
Combi dowel Ø5 Philips PH2 head 34 12 11 *09424 > 885
Philips PH2 head 24 12 11 *09423 > 885
Philips PH2 head 34 9 8.5 *09456 > 885
Ø5.8 Ø5
T
A
* American market only
Ø5
Ø7-8 N
2000 Pcs Made of steel and zinc
Combi dowel M6 34 8 09592 > 885
Ø5.8 34 10.5 09594 > 885
M6
X X > drilling depth of M6 insert
A
Ø7-8 M6 insert to suit
1000 Pcs Made of steel and zinc
1.31System 5
Cams and Dowels
Double-ended Dowel
· Available in Ø7mm
· Suitable for use with all Ø12mm and Ø15mm
Cam2000, Cam3000 and Cam5000 products
· No circlip for increased tolerance
· Available in a variety of lengths to suit most
panel-to-panel applications
Cabinet Connectors
S L A B
Zinc plated
thickness
distance
Lenght
Drilling
lenght
Panel
Total
Technical and
mounting details Item number
Dowel 41 47.4 24 0* 05929 > 883
without circlip
61 67.4 34 0* 05757 > 883
Ø3.6 Ø7
80 86.4 34 19 05753 > 883
Ø6
60 66.4 24 19 05778 > 883
S
L
*B=0 > no panel required
Ø7-8
A A
B
Ø12
Ø3.6 Ø7
Ø6
S
L
2000 Pcs (05929)
1000 Pcs (05757)
500 Pcs (05778)
250 Pcs (05753) Made of steel
1.32System 5
Cams and Dowels
Angled Dowels
· Suitable for applications requiring angled joints
· Suitable for use with all Ø12mm and Ø15mm
Cam2000, Cam3000 and Cam5000 products
· Adjustable angle from 90° to 180°
Zinc plated
Technical and
Zinc
mounting details Item number
Angled dowel 05860 > 883
180° fixed
Ø15
Ø7-8 B/2
B
44
44
x
44
Distance
x in mm
20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85°
13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6
15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7
16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7
B 18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8
19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8
22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45
23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46 45 x
650 Pcs Made of steel
Angled dowel
05282 > 885
90° fixed
44
Ø7-8
B/2
B
44
1000 Pcs Made of zinc
1.33System 5
Cams and Dowels
End Dowels
· Available in a variety of head and length combinations to
suit most end panel applications
· Suitable for use with all Ø12mm and Ø15mm
Cam2000, Cam3000 and Cam5000 products
¨ ¨
· ‘Klix’ locking feature provides a strong, vibration proof
Mushroom Dowels Connectors 5 Cam 2000 Connectors 5
joint
· Both ‘mushroom’ and countersunk headed versions
available
Cabinet Connectors
A B S L
Ø7-8
Total length
thickness
A B
distance
Length
Drilling
Panel
Technical and
Zinc
mounting details Item number
MUSHROOM
Mushroom 24 19 39.5 43.5 05609 > 885
board
dowel
C thick. S L
Ø7
16 36.5 40.5 Ø6-7 34 19 49.5 53.5 05611 > 885
19 39.5 43.5
Ø5.9 Ø11
16 46.5 50.5
19 49.5 53.5 S Other colours on request
L
20 16
Ø7-8
COUNTERSUNK
oard
hick. S L
16 36 39
Ø7
19 39 42
A B
16 46 49 Ø5.9 Ø11
19 49 52
S
L
1000 Pcs Made of zinc
1.34System 5
Cams and Dowels
Ø15mm Cam5000
· Improved central shape for highly resistant joint
· Suitable for use with all Titus dowels
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Cam retaining pips ensure that a cam is held in panel
position prior to assembly
B D e h
Cam height
TeraBlack
thickness
for dowel
Drilling
Drilling
depth
Panel
Technical and
Zinc
mounting details Item number
Cam5000 9537
cross drive PZ2 drive 12/13 10.5 6 min 9.9 09695 > 885 959
15/16 12.5 7.5-8 11.9 09690 > 885 959
e
h
Use standard cover caps with pin=Ø4mm
9533 H e D B
Ø15
5587 9.9 6 10 12/13
Ø15xD 5563 10.4 6 10.5 12/13
5644 11.9 7.5 12 15/16
e
B H e D B
Ø15 5654 9.9 6 10 15/16
5656 10.4 6 10.5 18/19
5657 11.9 7.5 12 22/23
5676 9.9 6 10 25/26
5678 10.4 6 10.5 28/29
5679 11.9 7.5 12 29
1000 Pcs Made of zinc
Cam5000 9537
hexagonal drive combined drive with HEX 15/16 12.5 7.5-8 11.9 09699 > 885 959
18/19 14 9-9.5 13.2 09692 > 885 959
e
h
Use standard cover caps with pin=Ø4mm
9533 H e D B
Ø15
5587 9.9 6 10 12/13
Ø15xD 5563 10.4 6 10.5 12/13
5644 11.9 7.5 12 15/16
e
B H e D B
Ø15 5654 9.9 6 10 15/16
5656 10.4 6 10.5 18/19
5657 11.9 7.5 12 22/23
5676 9.9 6 10 25/26
5678 10.4 6 10.5 28/29
5679 11.9 7.5 12 29
1000 Pcs Made of zinc
1.35System 5
Cams and Dowels
Ø15mm Cam3000
· Its optimised shape provides a more efficient cam profile
with smooth tightening action and greater dowel pull-up
· Suitable for use with Combi dowels, forged steel dowels,
Quickfit dowels and Quickfit TL dowels
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
Cabinet Connectors
B D e h
Cam height
9537
thickness
for dowel
Drilling
Drilling
depth
Panel
Zinc
Technical and
mounting details Item number
e
h
Cam3000 12/13 10.5 6 min 9.9 09495 > 885
9533
cross drive 9537 Ø15
15/16 12.5 7.5-8 11.9 09533 > 885
e Black available upon request
h
9533
Ø15
H e D
5587 9.9 6 10
Ø15xD 5563 10.4 6 10.5
5644 11.9 7.5 12
e
B H e D
Ø15 5654 9.9 6 10
5656 10.4 6 10.5
5657 11.9 7.5 12
5676 9.9 6 10
5678 10.4 6 10.5
5679 11.9 7.5 12
1000 Pcs Made of zinc
Cam3000
combined drive with HEX 9537
15/16 12.5 7.5-8 11.9 09537 > 885
hex drive 9537
18/19 14 9-9.5 13.2 09536 > 885
e
h
e
h 9533 Use standard cover caps with pin=Ø4mm
Ø15
Black available upon request
9533 D
Ø15 H e
5587 9.9 6 10
Ø15xD 5563 10.4 6 10.5
5644 11.9 7.5 12
e
B H e D
Ø15 5654 9.9 6 10
5656 10.4 6 10.5
5657 11.9 7.5 12
5676 9.9 6 10
5678 10.4 6 10.5
5679 11.9 7.5 12
1000 Pcs Made of zinc
1.36System 5
Cams and Dowels
Ø15mm Cam2000
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Suitable for use with all Titus dowels
· ‘Klix’ locking feature provides a strong, vibration proof
joint
· Linear cam profile results in smooth, easy cam rotation
and dowel pull-up
B D e
thickness
for dowel
Drilling
Drilling
Nickel
depth
Panel
Technical and
Zinc
H e D B
mounting details Item number
H e D B
5587 9.9 H e 6 D 10
B 12/13
12/13 10min 6-6.5 847 885 5586
Ø15xD Cam2000 5587 9.9 6 10 12/13
crossØ17drive 5563 10.4
5586 9.9 66 10 10.5
12 12/13 *05587 >Ø17
5563 10.4 6 10.5 12/13
Ø15
Ø15xD
5644 11.9 7.5 12 15/16 5644 11.9 7.5 12 15/16
1 mm H e D B
12/13 10.9 6-6.5 847
1 mm 885
e
B e H e D B
5652 10.9 6.5 11 13
05653 >
B Ø15 5654 9.9 6 10 15/16 Ø15 5658 H 12.4 8 e 12.5 D
16 B
5656 10.4 6 10.5 18/19 5659 13.9H 9.5 e 14 D 19 B 5652
H e D B
5657
5676
11.9
9.9
7.5
6
Ø1510
12 22/23
25/26 5654 15/16
5675
9.9
5677
5587 13 612.7 231012/13
15.9
11.5
17.4
6 17.5 10 26
9.9
7.5-8
16
15/16 05644 >Ø15 H847 e885 D B 5658
5586 9.9 6 10 12
Ø15xD 5678 10.4 6 10.5
12
28/29
29 5656 10.4 10.4
5563
66 10.5
10.512/13 18/19 Ø17 5659
5679 11.9 7.5 5644 11.9 7.5 12 15/16
5657 11.9 7.5 12 22/23 5587 9.9 6H 10 D 12/13
B 5675
e 1 mm e
B
Ø15xD 9.9
H
6
e
10
D
25/26
B
5563 10.4 5652 6 10.5 11 12/13
13 5677
5676 10.9 6.5
Ø15 9.9 10 15/16 Ø15 5644 11.9 5658 7.5
12.4 1212.5
8 15/16
16
5678
5654
10.4 10.4 666 10.510.518/19 28/29
15/16 12.7 7.5-829 05654 847 88511.5
5659 13.9 9.5 14 19
HEX drive
5656
e 11.9 7.5 12 1222/23
>
5679 5657 11.9 7.5 5675 15.9 16 23
B 5676 9.9 6 10 25/26 H 5677 17.4
e 13 D17.5 26 B
5678 10.4 6 10.5 28/29
18/19
5679 11.9
Ø1514
7.5 12 29
9-9.5 05656
5654
>
9.9
84710 6
885 15/16
5656 10.4 6 10.5 18/19
22/23 16 11-11.5 5657 > 11.9847 7.5885 12
05657 22/23
5676 9.9 6 10 25/26
5678 10.4 6 10.5 28/29
25/26 17.9 12.5-13 05676 > 847 885
5679 11.9 7.5 12 29
28/29 19.4 14-15.5 05678 > 847 885
Other finishes on request
*Ultraflat - specially designed for thin panels
(does not work with TL dowels)
500 Pcs (05675, 05677, 05679)
1000 Pcs Made of zinc
Cover caps for Ø15 cams > see page 1.39
Made of plastic
1.37System 5
Cams and Dowels
Ø12mm Cam2000
· Suitable for all Titus screw-in dowels
· Available in a variety of head, drive recess and board
thickness versions to suit most applications
· Particularly suited to drawer front attachment applications
· ‘Klix’ locking feature provides a strong, vibration proof joint
· Linear cam profile results in smooth, easy cam rotation and
dowel pull-up
Cabinet Connectors
B D e
thickness
for dowel
Drilling
Drilling
depth
Panel
Technical and
Zinc
mounting details Item number
H e D B
H e D B
Cam2000 5587 9.9 6 10 12/13 12/13
5586 9.9
106 min
10
6-6.5
12
05575 > 885
10.4 6 10.5 12/13 Ø17
Ø12
Ø15xD 5563
5644 11.9 7.5 12 15/16
e 1 mm H e D B
B H e D B
Ø14
5652 10.9 6.5 11 13
Ø15 5654 9.9 6 10 15/16 Ø15 5658 12.4 8 12.5 16
5656 10.4 6 10.5 18/19 5659 13.9 9.5 14 19
5657 11.9 7.5 12 22/23 5675 15.9 11.5 16 23
1 mm 5676 9.9 6 10 25/26 5677 17.4 13 17.5 26
5678 10.4 6 10.5 28/29
5679 11.9 7.5 12 29
Ø12 Ø12
Other finishes on request
Ø12 x D
e
B D
2000 Pcs Made of zinc
H e D B
H e D B
Cam2000 5587 9.9
10.4
6
6
10
10.5
12/13
12/13
12
5586 9.9 106 min
10 12 6 05389 > 885
Ø15xD 5563 Ø17
Ø12 headed 5644 11.9 7.5 12 15/16
H e D B
e 1 mm
B H e D B
5652 10.9 6.5 11 13
Ø15 5654 9.9 Ø14
6 10 15/16 Ø15 5658 12.4 8 12.5 16
5656 10.4 6 10.5 18/19 5659 13.9 9.5 14 19
5657 11.9 7.5 12 22/23 5675 15.9 11.5 16 23
1 mm
5676 9.9 6 10 25/26 5677 17.4 13 17.5 26
5678 10.4 6 10.5 28/29
5679 11.9 7.5 12 29
Ø12 Ø12
Other finishes on request
Ø12 x D
e
B D
1000 Pcs
2000 Pcs (05576) Made of zinc
Cover caps for Ø12 cams > see page 1.39
Made of plastic
1.38System 5
Cover Caps
· Available in a variety of colours
· Suitable for use with both pozi and hex cam drive
features
· Suitable for use with various diameter cams
· Both domed and flat versions available
X
Light brown
Dark brown
White
Black
Technical and
mounting details Item number
Cover cap 3.3 *01029 > 831 835 867 877
Ø17
Ø17
Other colours on request
X Works with PZ2 drive caps:
05644, 09533, 09495, 09690, 09695
Ø3.2
Ø17
2.5
Ø4.2
Ø29.5
Ø17
25000 Pcs Made of plastic X
Ø3.2
Cover cap 277-4225 > 390 350
Ø17
Ø17
Other colours on request
2.5
Works with HEX drive cams:
05654, 05656, 09692, 09536, 09537
Ø4.2
Ø29.5
1000 Pcs Made of plastic
1.391.40
Cabinet ConnectorsSystem 6
Quickfit-Expando
Connectors
System Features
A face boring connector family for 32mm System 6 consists of a range of 20mm
system drilling with full range of panel diameter housing, Quickfit™ and
and application variants for all cabinet conventional dowels, end dowels and double
manufacturing applications ended dowels.
· Minimum drilling requirements Housings are made from high grade plastic
· Linear cam design for constant or zinc, with zinc cams.
tightening loads when driving
· Angledriv feature on cam for maximum Wedgefix-6 connector is a special fastener
driving comfort without cam, simply to snap onto a
· Interchangeable pins for wood, plastic pre-inserted dowel.
and steel applications
· Pins with twinstart drive for fast insertion
· Interchangeable Quickfit pin fastenings
drop on available
· Tool-less fastening capable versions
· Back-to-back fastenings for common
vertical panel fixing of shelves
Applications Titus System 6 is ideal for use in high edge boring is required, it is an excellent
volume production of case goods, closet choice for manufacturing environments with
and garage storage systems. Because no limited drilling capacity.
Side-entry side entry Side-entry insertion of shelfdrop
panel:
on from Drop-on insertion of shelf panel:
Drop-on the side or from the top only from the top
Using drop-on connections allows
for one-man installation
side entry
Angledriv feature The angledriv feature on the cam allows
for the angled position of the screwdriver
with the locking action creating a tight and
secure joint.
1.41Cabinet Connectors
System Features
Outrigger/ Outrigger Non outrigger
Non outrigger
Expando function Expanding housings and dowels
provide a tight joint.
Assembly 1. Knock the housing into face board 2. Press the dowel into side panel
3. Assemble the panels 4. Tighten the joint
1.42System 6
Quickfit-Expando
Expanding Dowels
· Available in Ø5mm, Ø8mm and Ø10mm for panel-
to-panel, panel-to-hollow profile and back-to-back
applications
· Suitable for applications with all Titus Ø20 and Sys 6
housings
· ‘Klix’ locking feature provides a strong, vibration proof
connection
· Depth stop collar for accurate insertion
D2
Drilling diameter
for dowel thread
Dark grey
Technical and
mounting details Item number
Dowel 5 06408 > 880
ØD2 x 12.5
D2= Ø5mm
ØD2 x 12.5
Ø8 x 12.5
Ø8 x 12.5
5000 Pcs Made of zinc, plastic
Dowel Ø5 x 7.5 06479 > 880
back-to-back
Ø5 x 7.5
applications
Ø5 x 7.5
Ø10 x 12.5
Ø10 x 12.5
5000 Pcs Made of zinc, plastic
1.43System 6
Quickfit
Dowel
· Available in various Ø3mm and/or Ø5mm thread forms
for screw-in, knock-in and/or ‘spiked’ hole applications
· Suitable for applications with all Titus Ø20mm and
Sys 6 housings
· ‘Klix’ locking feature provides a strong, vibration proof
connection
· Dowels feature an integral skirt which acts as a positive
stop during insertion
Cabinet Connectors
C
for dowel thread
Drilling depth
Steel
Technical and
Zinc
mounting details Item number
Dowel Ø5 9 06401 > 885
Ø5xC 8 06402 > 885 883
11.5 06406 > 885 883
Ø5x8
Ø5x12
hole to suit M4 insert
Ø5x11.5
4500 Pcs (steel)
5000 Pcs (zinc) Made of zinc or steel
Ø3 max
1.44System 6
Double-ended Dowels
End Dowels
· For 16mm, 18mm and 19mm board
· Suitable for applications with all Titus Ø20mm
and Sys 6 housings
· ‘Klix’ locking feature provides a strong, vibration proof
connection
SYS0606736/APP
B
1.5
Ø4.8 Ø9.5
thickness
Panel
Steel
Technical and
Zinc
mounting details Item number
Double-ended 16 06414 > 885
dowel
Ø4.8 Ø5.8 19 06416 > 885
B
Ø5 x thru
Ø5 x thru
2500 Pcs Made of zinc
Double-ended 19 06389 > 883
dowel Ø4.8 Ø5.8
Ø4.8 Ø5.8
B
B
Ø5 x thru
Ø5 x thru
2500 Pcs Made of steel
End dowel 1.5 16 06412 > 885
Ø4.8 Ø9.5
19 06415 > 885
B
Ø5 x thru
Ø4.8 Ø5.8
2500 Pcs Made of zinc
1.45System 6
20mm Knock-in Housing
Non-outrigger
· Available in 15mm/16mm and 18mm/19mm versions for
drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· ‘Klix’ locking feature provides a strong vibration proof
connection
· Compatible with all Sys 6 screw-in and Quickfit dowels
Cabinet Connectors
e B D
Light grey
thickness
Drilling
Brown
plated
Maple
Nickel
depth
White
Black
Panel
Silver
Technical and
mounting details Item number
Side-entry 7.75 15/16 12.5 06381 > 841 898 835 877 861 861
24 9.25 18/19 14 06385 > 841 898 835 877
Other colours on request
Ø20 x D
B
e
9.5
2500 Pcs Made of plastic
Drop-on 7.75 15/16 12.5 06383 > 841 898 882 835 877
24 9.25 18/19 14 06387 > 841 898 882 835 877 861
Other colours on request
Ø20 x D
B
e
9.5
2500 Pcs Made of plastic
Drop-on
7.75 15/16 12.5 06447 > 847
22
9.25 18/19 14 06449 > 847
Ø20 x D
B
e
9.5
500 Pcs Made of zinc
1.46System 6
20mm Knock-in Housing
Outrigger
· Available in 15mm/16mm and 18mm/19mm versions for
drop-on and/or side-entry applications
· Available in all-metal or plastic/metal options
· ‘Klix’ locking feature provides a strong vibration proof
connection
· Compatible with all Sys 6 screw-in and Quickfit dowels
e B D
Light grey
thickness
Drilling
Brown
plated
Maple
Nickel
depth
Panel
White
Black
Silver
Technical and
mounting details Item number
32 32
Side-entry 9.25 18/19 14 06395 > 841 898 835 877 861
E E 22
H 22 H
Other colours on request
Ø10 x 10.5 Ø20 x D
B
e
32 9.5
1250 Pcs Made of plastic
Drop-on 32 7.75
32 15/16 12.5 06439 > 841 898 882 835 877
E E 22
H 22 H
9.25 18/19 14 06397 > 841 898 882 835 877 861
Other colours on request
Ø10 x 10.5 Ø20 x D
B
e
32 9.5
1250 Pcs Made of plastic
Drop-on 7.75 12.5 06455 > 847
32 32
9.25 14 06457 > 847
E E 22
H 22 H
Ø10 x 10.5 Ø20 x D
B
e
32 9.5
500 Pcs Made of zinc
1.47System 6
Wedgefix Housing
(no Inner Cam)
· Available in 12mm, 15mm/16mm and/or 18mm/19mm
versions for Quickfit-6 and/or Standard Dowel applications
· Available in a variety of plastic colours
· Wedgefix-6 housing allows easy customer hand-assembly
or factory automated insertion
· When used with Quickfit-6 dowels this provides a true
tool-less fastening system
Cabinet Connectors
B D
thickness
Drilling
brown
depth
White
Black
Panel
Dark
Technical and
mounting details Item number
For use with 15/16 12.5 06473 > 877 835 898
screw-in
dowels 18/19 14 06465 > 877 835 898
22
Other colours on request
Ø20 x D
B
e
9.5
2500 Pcs Made of plastic
For use with 15/16 12.5 06471 > 877 835 898
Quickfit
dowels 18/19 14 06472 > 877 835 898
22
Other colours on request
Ø20 x D
B
e
9.5
2500 Pcs Made of plastic
1.48System 6 i For use with dedicated drill bit only.
See below.
Flush 20mm Knock-in Housing
Non-outrigger
· A face-boring connector with the flush housing permits
easy flat-pack transportation without panel damage
· Available for 19mm board thickness for drop-on and/or
side-entry applications
· ‘Klix’ locking feature provides a strong vibration proof
connection
· Compatible with all Sys6 screw-in and Quickfit dowels
e B D
drop on 22
H E
thickness
Drilling
plastic
depth
White
Panel
Technical and
mounting details Item number
Side-entry 9.5 19 14.2 06343 > 877
side entry 22
E
H
Ø 20xD
B
e
1.5/45°
9.5
1000 Pcs Housing made of plastic, cam made of zinc
Drop-on 9.5 19 14.2 06348 > 877
drop on 22
H E
Ø 20xD
B
e
side entry 22
1.5/45°
9.5
E
1000 Pcs Housing made of plastic, cam made
H of zinc
Drill bit for Flush 20mm right handed 0435
Knock-in housing 40
37.1 left handed 0436
9.2
45°
Ø 20
Ø 10
Ø 24
19.2
1 Pcs Made of carbon steel
1.49System 7
High Strength Connectors
Contract Fix™ System
· High performance fastener
· Thread design gives repeatability
· Multi-drive recess
· Higher than average pull up
Cabinet Connectors
Zinc plated
Technical and
Zinc
mounting details Item number
M6 Dowel 7x34 05971 > 883
Ø7-8
7.5/8
34
1000 Pcs Made of steel
Ø7-8
Housing 7.5/8 05960 > 885
Ø15x12.5/14
cylinder
15x12 34
Ø15x12.5/14
1000 Pcs Made of zinc
Grub screw 05917 > 885
2500 Pcs Made of zinc
1.50The Titus Group Profile
Titus Group
Titus focuses on the design, manufacture and Titus Group is owned and managed from its Quickfit technology
distribution of connectors, concealed hinges headquarters in United Kingdom. We are able to makes Titus the World leader
drawers and soft closing mechanisms in furniture provide products and services to every customer
and household appliances. around the world based on manufacturing
in connectors for RTA furniture
facilities in Europe, North America, China, SE Asia,
Australia and New Zealand.
1973
1975
Titus established 1977
Revolution in 1980
particleboard Titus launches
concealed cabinet Titus USA
1990
panel processing
connector office and Inovative Quickfit
productivity
manufacturing technology
established launched
2005
2006
Titusonic 2007
ultrasound Merger with 2009
fastening Lama d.d. Titus becomes
Titus+ Damper’s
2014
technology Launch of Acqusition of
development and
Glissando Specialist Tekform, Australia
engineering
in precision
components’
engineering
2017
2019
Launch of
T-type full hinge Launch of
2020
programme TeraBlack product Acquisition of
range Simon Kinetics
1.53Vision Mission Titus Business
Philosophies
The world’s best engineering for To provide manufacturers with
precision components components’ solutions that improve and Principles
competitiveness
· Gain total knowledge of our customers and
their markets
· Focus on identifying and creating high
volume component niches
· Meet our customers’ expectations with
global consistency
· Build long term associations with
customers, suppliers, colleagues and
shareholders
· Invest in the abilites of individuals at every
Die level
· Continuously enhance input efficiency and
casting sustainability
ts
en
on
Te
mp
ch
Tooling
no
Co
log
Automated
on
Dampers
ies
isi
assembly
ec
systems
Pr
Drawers Connectors
Damped Damped Titusonic
components hinges FastFit
Furniture Hardware
Furniture Hardware Components Technologies
· Cabinet connectors · Hydraulic dampers · Automated assembly systems
· Concealed hinges · Precision components · Die casting technologies
· Soft closing systems · Precision die castings · Tooling
· Drawers and drawer systems · Damped mechanisms · Titusonic - Ultrasound fastening
· Kitchen accessories · FastFit technology
· RV hardware
1.54You can also read
