QUICK SETUP GUIDE - English - 32D50 40D50P - Hisense
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
32D50 40D50P QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual. ES- English NO.1
Contents Contents Accessories List �������������������������������������������������������������������������������������������������������������1 Installing the Stand ���������������������������������������������������������������������������������������������������������2 TV Front �������������������������������������������������������������������������������������������������������������������������4 TV Rear ��������������������������������������������������������������������������������������������������������������������������5 Making Connections �������������������������������������������������������������������������������������������������������5 Remote Control ��������������������������������������������������������������������������������������������������������������9 Turning the TV on for the First Time ����������������������������������������������������������������������������� 11 Specifications ���������������������������������������������������������������������������������������������������������������13 Accessories List The following accessories are included with TV: TV Base Stand User Manual MUTE Anyview Cast SOURCE ON OFF DMP PVR FAV Warranty MENU HiSmart Quick Setup Guide OK Card RETURN EXIT CH LIST VOL CH EPG 1 2 3 4 5 6 7 8 9 INFO 0 PRE CH I/II LANG. P.MODE S.MODE SIZE SUBT. TEXT INDEX SUB PAGE E R -22654HS Quick Setup Guide Warranty Card Remote Control AAA Batteries × 2 (ST4 × 12F) × 4 (32˝) (ST4 × 14F) × 4 (40˝) English 1
Installing the Stand Installing the Stand NOTES The TV screen is very fragile,and must be protected at all times when removing the base stand.Be sure that no hard or sharp object,or anything that could scratch or damage the screen,come into contact with it.DO NOT exert pressure on the front of the TV at any time because the screen could crack. For tabletop use,the TV must be attached to the provided stand as shown on this page. Product images are only for reference, actual product may vary in appearance. WARNING Be sure to disconnect the AC power cord before installing a stand or wall-mount brackets. CAUTION Carefully place your TV facedown on a soft,cushioned surface to prevent damage to the TV or scratching to the screen. Follow the illustrations and textual instructions below to complete the installa- tion steps: 1. Attach the stand to the TV set as shown in the picture. 2. Use the screws (ST4 × 12F) × 4 (32˝), (ST4 × 14F) × 4 (40˝) to fix the stand tightly. Screws: ST4 × 12F (32˝) ST4 × 14F (40˝) BASE STAND 2 English
Installing the Stand WALL-MOUNT BRACKET If you need to use the Wall-mount Bracket, please refer to the below information. 200×100(32˝) 200×200(40˝) M6 English 3
TV Front TV Front Remote Sensor Remote Indicator STANDBY / SOURCE Item Description Receive remote signals from the remote control. Remote sensor Do not put anything near the sensor, as its function may be affected. Red light up in standby mode. Blue light up in power on Remote Indicator mode. Press for a few seconds to turn on the TV or put the TV STANDBY/ SOURCE in standby mode. / Touch to select among the different signal sources. NOTES The Picture is Only for Reference. Powering up or down the TV requires several seconds of processing time.Do not rapidly turn the TV on / off as abnormal operation may occur. 4 English
TV Rear & Making Connections TV Rear R AV AUDIO IN IN L AV&COMP VIDEO DC 5V 0.5A(MAX) USB HDMI 3 HDMI 2 COMPONENT IN PC IN PC/DVI OPTICAL /AUDIO OUT Y PB PR AUDIO IN VGA ANT/CABLE IN HDMI 1 (ARC) NOTES The Picture is Only for Reference. HEADPHONE Connect Headphone for audio out of the TV. The built-in speakers will be disabled once the headphone is connected. TV JACK /AUDIO OUT (not included) English 5
Making Connections HDMI/COMP/AV Connect a HDMI / Comp / AV cable from an external A/V equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. Please consult your device user manual for instruction. · To select the HDMI / Component / AV Press [Source] button, when the list of input Source appears, press [▲/▼] to select the source [HDMI] / [YPbPr] / [AV], then press [OK] to connect. TV JACK Video Effect: HDMI BEST(HDMI) (not included) HDMI cable BETTER(COMP) (not included) Red(PR/CR) PR COMPONENT IN Red(PR/CR) (not included) Blue(PB/CB) PB Blue(PB/CB) (not included) Green(Y) Green(Y) Y (not included) Red(R) R AUDIO IN Red(R) (not included) White(L) White(L) L AV IN AV&COMP GOOD(AV) (not included) Red(R) R AUDIO IN Yellow(Video) (not included) White(L) L AV IN AV&COMP (not included) Yellow(Video) Red(R) VIDEO White(L) VGA & AUDIO Connect a VGA cable and an audio cable from the PC. Press [Source] button, when the list of Input Source appears, press[[▲/▼] to select the source [PC], then press [OK] to connect. TV JACK PC/DVI VGA AUDIO IN 6 English
Making Connections OPTICAL Connect an optical cable from an external digital audio system Optical S/PDIF—is a type of digital audio interconnect cable used in consumer audio equipment to output audio over reasonably short distances. The signal is transmitted over a fibre optical cable. Before connecting a digital audio system to the OPTICAL jack, you should decrease the volume of both the TV and the system to avoid that the volume suddenly become bigger. TV JACK Audio Amplifier/Speaker OPTICAL OPTICAL cable (not included) ANT Connect an outdoor VHF/UHF antenna or cable. Outdoor Antenna TV JACK Cable or ANT OUT ANT/CABLE IN (not included) Antenna Cable (75Ω) VHF/UHF Antenna USB Connect the USB devices such as hard drives, USB sticks or digital cameras for browsing photos, listening music and watching recorded movies. You can record live TV program (refer to PVR in user Manual). At the same time firmware update is also an easy thing and can be done just by plugging the USB with the update files into the USB interface. TV JACK USB DC 5V 0.5A(MAX) English 7
Making Connections NOTES When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. Exceeding a total current consumption may result in damage. The maximum current consumption is 500mA. For individual non-standard high-capacity mobile hard disk, if it's impulse current is greater than or equal 500mA, it may cause TV-rebooting or self-locking. So the TV does not support it. The USB port supports a voltage of 5V. The maximum supported storage space of the hard disk is 1T. If you want to store the video streaming of a DTV program, the transfer rate of the USB storage device must not be less than 5MB/s. At least a mobile storage with more than 20G is required to Timeshift and record a 2.5 hour HD video. ARC Connect an HDMI cable from an external digital audio system. ARC enables the TV to directly output the digital sound through an HDMI cable. Please note that it works only when the TV is connected to the audio receiver that supports the ARC (Audio Return Channel) function. When this port is used as the ARC function, it can't be used as signal input at the same time. TV JACK HDMI (ARC) HDMI1 HDMI cable (not included) 8 English
Remote Control Remote sensing Window Power button Available source selection Switch to DTV Radio program Zoom image Analog / Digital TV Mute the sound Start video recorder Select USB-Digital Media Set the sleep time player mode Select Audio language Mono/Stereo Display the subtitle content operation,Audio select of the signal button Fast access to your saved favorite programs Red, Green, Yellow and Blue are used in media mode Display the main menu/ Exit: Exit all menu display Back menu display Enter or confirm the operation, ▲/▼/◄/► Up/ Down/Left/Right Display informations Electronic program guide Picture mode selecting Channel Up/ Channel Volume Up / Volume Down Down Sound mode selecting 1,2,...numbers: For direct channel access To return to the last Freeze picture view program Time shift in DTV Mode Text, Size, Reveal, Hold, Index, Subpage (refer to Video recorder list teletext function) Play/ Pause, Stop, etc. are used in media mode English 9
Remote Control Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. 3. Close the battery compartment cover. 1 Gently push and slide 2 Insert the batteries 3 Gently push and slide NOTES Product image is only for reference, actual product may vary in appearance. Dispose of your batteries in a designated disposal area. Do not throw the batteries into a fire. Do not mix battery types or combine used batteries with new ones. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. If you do not intend to use the remote control for a long time, remove the batteries. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately. Remote Control Operation Range 1. Point the remote control at the TV within no more than 5 metres from the remote control sensor on the TV and within 60° in front of the TV. 2. The operating distance may vary depending on the brightness of the room. 10 English
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. Switch on at the bottom of the TV. 3. The first time you turn the TV on, it will go straight into the Installation Guide. It will assist you to specify the OSD Language, Mode Setting, Country, Tuner Type, Auto Scan, LCN, Auto Channel Update. NOTE Always disconnect the TV from the mains socket when it is not in use for a long period of time. To completely disconnect the mains power, please remove the mains plug from the mains socket or switch off the power switch. 4. Press the [▲/▼/◄/►] buttons to navigate the menu and change the settings. OSD Select your desired language to be displayed on the menu. Language Select your Mode Setting: Store Mode and Home Mode. Store Mode: Optimizes the picture for store environments. Home Mode: Recommended mode for the home use and low Mode Setting power consumption. Please note that Use settings are not saved after switching off the TV when you select Shop Mode. Country Select the country where you will operate the TV. Tuner Type Select your Tuner Type: Antenna and Cable. Auto Scan Select your Auto Scan: ATV, DTV, DTV+ATV. Logical Channel Numbers: LCN In a convenient and familiar way to provide program numbers to users. Auto Channel Select On or Off to channel update. Update English 11
Turning the TV on for the First Time 5. Select Start into Auto Scan. After scan, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Edit Programmes under the Channel menu. NOTE If you want to reboot the Installation Guide, you can press the [Menu], and select Setup menu, then press [OK] to select First Time Setup. Refer to the user manual. 12 English
Specifications Features, appearance and specifications are subject to change without notice. If you encountered difficulty when setting up your TV, we suggest you refer to the troubleshooting tips in the User Manual. Model Name 32D50 40D50P Width: 733 Width: 902 Without Height: 434 Height: 523 Stand(mm) Depth: 89 Depth: 86 Dimension With Stand Width: 733 Width: 902 (mm) Height: 477 Height: 563 Depth: 180 Depth: 204 Without 4.8 8.0 Stand(kg) Weight With Stand 4.9 8.2 (kg) Active Screen 32 inches 40 inches Size(Diagonal) Screen resolution 1366×768 1920×1080 Audio power 6W +6W 7W +7W Power consumption 50W 70W Power supply AC 100V - 240V ~ 50/60Hz Analog PAL-D/K, B/G, I SECAM-D/K, B/G Receiving systems Digital DVB-T, DVB-C Temperature: 5°C - 45°C Environmental Humidity: 20% - 80% RH conditions Atmospheric pressure: 86 kPa - 106 kPa 480 I / 60 Hz, 480 P / 60 Hz, 576 I /50 Hz, 576 P /50 Hz, 720 P / Component Input 50 Hz, 720 P / 60 Hz, 1080 I / 50 Hz, 1080 I / 60 Hz, 1080 P / 50 Hz, 1080 P / 60 Hz RGB / 60 Hz (640×480, 800×600, 1024×768) HDMI Input YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P) YUV / 50 Hz (576 I, 576 P, 720 P, 1080 I, 1080 P) Dial: 1800 447 367 (Toll Free) http://www.hisense.com.au English 13
You can also read