Product Catalog 2020 - www.phocos.com
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Product Catalog
2020
www.phocos.com
Your Off-Grid Partner
Twenty years ago, our passion for Off-Grid solutions was our foundation. We are expanding on our in-
novation and success to service customers beyond Off-Grid. Today, we strive to make reliable energy
access possible anywhere in the world, any time, and for Any-Grid.
We strive to make reliable energy access possible anywhere
in the world, any time, and for Any-Grid.
The Phocos mission is to design and deliver world-class solutions for energy production, storage, and
conservation to enable universal access to reliable energy. Our goal is to maximize system reliability
and minimize total cost of ownership for our customers.
Our roots are tied deeply in rural electrification applications throughout the developing world. We
built our off-grid reputation by supplying high-quality energy solutions to global markets where
huge populations do not have access to reliable grid power. Phocos has emphasized the develop-
ment of intelligent products and solutions for rural electrification applications, incorporating the
latest technological advances at the most affordable cost.
4-8 10-20
Contents
Contents/Your Off-Grid Partner. . . . . . . . . . . . . . . . . 2-3
MPPT Charge Controllers. . . . . . . . . . . . . . . . . . . . . . . 4-8
PWM Charge Controllers. . . . . . . . . . . . . . . . . . . . . . . 10-20
Any-GridTM Hybrid Inverter Charger. . . . . . . . . . . . . 22-26
Off-Grid Inverters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30
MPPT Charge PWM Charge
DC Lighting & Refrigeration. . . . . . . . . . . . . . . . . . . . 32-35 Controllers Controllers
Turnkey Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-39 ECO-N-MPPT CM Series CIS-N Series
Wire Gauge Recommendations CIS-N-MPPT-LED CML-USB CIS-N-LED
CIS-N-MPPT Series ECO-N Dingo
for Solar Installations. . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
ECO-N-T Series SPS Series
CXNup
22
www.phocos.com Subject to change without notice
www.phocos.com
Over time, our product portfolio and expertise have expanded to serve industrial Off-Grid applica-
tions. Phocos’ solutions help ensure reliable energy is available for all types of industrial applications,
equipment, and conditions. From solar lighting to oil and gas, traffic to telecom, we pride ourselves
with meeting the challenging demands industrial customers face to offer the right solution that will
last for years to come.
There is a growing demand for Off-Grid solutions for recreational activities like boats, cabins, RVs,
and camping. In such applications, energy independence is not only a necessity, it is a way of life.
Phocos is dedicated to developing solutions to support clean, sustainable living on the road, on the
water, or off the beaten path.
Phocos is headquartered in Ulm, Germany. However, Phocos’ global presence reaches far beyond its
German origins. Today, we operate sales, support and R&D subsidiaries globally. Our commitment
to local service and support anywhere in the world makes Phocos much more than a supplier of
components and solutions for Off-Grid systems. It makes us “Your Off-Grid Partner.”
We look forward to having the opportunity of working with you!
Sincerely,
The Phocos Global Network
22-26 28-30 32-35 36-39
Any-GridTM Hybrid Off-Grid DC Lighting Turnkey
Inverter Charger Inverters & Refrigeration Solutions
PSW-H Series PSW Series FR Series Refrigerator/Freezer SHS Kits
SL LED Lamps ECO Pico
3
3
Subject to change without notice www.phocos.com
www.phocos.com
MPPT Charge Controllers
4
www.phocos.com Subject to change without notice
5 Subject to change without notice www.phocos.com
ECO-N-MPPT (15 A)
MPPT Solar Charge Controller
Technical Drawing
31 mm
147 mm
90 mm
Product Introduction Technical Data
ECO-N-MPPT is the intelligent, cost-effective choice for low-power Type ECO-N-MPPT-85/15
applications that require maximum charging efficiency. Phocos’
System Voltage 12 / 24 V auto recognition
high-performance maximum power point tracking (MPPT)
Max. Charge/Load Current 15 A
algorithm ensures optimal charging current from your panel/array
in all conditions. This results in up to 30% higher power yield than Float Charge 13.8 / 27.6 V (25 °C)
conventional PWM charge controllers. This added efficiency paired Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
with Phocos’ precision 4-stage, temperature-compensated charge 14.4 / 28.8 V (25 °C), 2 h; activation:
Boost Charge
regime significantly extends battery lifespan, reducing number of battery voltage
CIS-N-MPPT-LED (15 A)
Industrial MPPT Solar Charge Controller w/ LED Driver
Technical Drawing
41.4 mm
150 mm
88.5 mm
Product Introduction Technical Data
The CIS-N-MPPT-LED is a multi-functional solar charge controller Type CIS-N-MPPT-LED
with built-in LED boost driver for solar outdoor lighting systems.
System Voltage 12 / 24 V auto recognition
Equipped with a widely-adjustable automatic light timer that uses
Max. Charge Current 15 A
solar input voltage to determine day and night, the CIS-N-MPPT-
LED adjusts to seasonal changes. In addition, the built-in LED driver Float Charge 13.8 / 27.6 V (25 °C)
features timed and low-voltage dimming of LED strings. Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
14.4 / 28.8 V (25 °C), 2 h
Boost Charge
activation: battery voltage
CIS-N-MPPT Series (15-30 A)
Industrial MPPT Charge Controllers w/ Lighting Control
Technical Drawing
88.5 mm
128 mm
41.4 mm
150
152
CIS-N-MPPT 85/15 CIS-N-MPPT 100/30
Product Introduction Technical Data
Off-Grid PV systems exposed to extreme weather/environmental Type CIS-N-MPPT 85/15 CIS-N-MPPT 100/30
conditions impose increased risk of damage to the power System Voltage 12 / 24 V auto recognition
electronics. In order to ensure reliable battery protection under such
Max. Charge/Load Current 15 A 30 A
conditions, Phocos developed the CIS-N-MPPT charge controller
Float Charge 13.8 / 27.6 V (25 °C)
family to prevent corrosion.
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
The CIS-N-MPPT series include convenient and advanced lighting
14.4 / 28.8 V (25 °C), for 2 h
control, which allows the user to decide whether they want the Boost Charge
activation: battery voltage < 12.3 / 24.6 V
automatic lighting control with LED dimming to be either time or 14.8 / 29.6 V (25 °C), for 2 h
low-voltage activated. Equalization Charge activation: battery voltage < 12.1 / 24.2 V
(at least every 30 days)
Product Features Deep-Discharge Protection
11-11.9 V / 22-23.8 V (by SOC)
11-12.02 V / 22-24.04 V (by voltage)
• Infrared-programmable load timing feature with dimming ideal
for lighting systems Reconnect Level 12.8 V / 25.6 V
• 2 years of system performance data accessible via MXI-IR Overvoltage Protection 15.5 V / 31.0 V
interface, PC software (CISCOM)
Undervoltage Protection 10.5 V / 21.0 V
• Up to 98% power conversion efficiency
Max. PV Panel Voltage 50 / 85 V 95 V
• Up to 4-stage charging increases battery lifespan
Max. Usable PV Power 225 W / 450 W 450 W / 900 W
• I/V or I/U curve sweep algorithm increases performance when
panels are shaded Max. PV Array Power 250 Wp / 500 Wp 600 Wp / 1200 Wp
• Fully encapsulated anodized aluminum housing design prevents Temperature Compensation -25 mV/K (12 V); -50 mV/K (24 V)
damage from corrosion, insects and dust Idle Self-Consumption 15 mA / 8 mA
• 20 cm connection wire Dimming Value 0-100 % (0-10 V output)
• Compatible with 60 cell solar modules Grounding Common Negative
• Compatible with Lithium batteries (no BMS communication) Ambient Temperature -40 to +60 oC
• IP68 Ingress Protection
Battery Type Lead acid (gel, AGM, flooded), adjustable
Datalogger 2 years
Optional Accessories
Wire Cross Section 2.5 mm2 (AWG 13) 3.3 mm² (AWG 12)
CIS-CU 88.5 x 150 x 41.4 128 x 152 x 43 mm/
Dimensions (WxHxD)
• Infrared remote control mm/ 3.5 x 6 x 1.6 in 5.1 x 6 x 2 in
MXI-IR Weight 0.78 kg / 1.72 lbs 1.45 kg / 2.54 lbs
• Infrared to USB programming Ingress Protection IP68 (1.5 m, 72 h)
accessory and interface to Certificates CE compliant, RoHS compliant
CISCOM software Warranty 5 years
8
www.phocos.com Subject to change without notice
NOTES
9
Subject to change without notice www.phocos.com
PWM Charge Controllers
10
www.phocos.com Subject to change without notice11 Subject to change without notice www.phocos.com
CM Series (4-10 A)
Solar Charge Controller for Low Power Applications
Technical Drawing
73 mm
61 mm 30 mm
Product Introduction Technical Data
The CM series is an economic solution for preventing battery
Type CM04 CM10
overcharging in low-power systems. It is simple, compact and
System Voltage 12 V
easy to use and install.
Max. Charge/Load Current 4A 10 A
CM series features a 2-stage PWM charging algorithm that
Float Charge 13.7 V
supplies an even charge across all battery cells which lengthens
battery lifespan. One green LED states when the CM controller is 14.5 V
Boost Charge
activation: battery voltage < 12.2 V
charging and reducing current via PWM.
Overvoltage Protection 30 V
Max. PV Panel Voltage 30 V
Product Features Idle Self-Consumption 4 mA
Grounding Common Positive
• LED charging display
Ambient Temperature -40 to +50 oC
• Large terminals up to 16 mm2/AWG 6
• Two-stage PWM charging algorithm (boost & float charging) Max. Altitude 4,000 m above sea level
• Reverse polarity protection Battery Type Lead acid (gel, AGM, flooded)
• Designed to work reliably and efficiently in small PV systems Max. Wire Cross Section 16 mm2 (AWG 6)
Dimensions (WxHxD) 61 x 73 x 30 mm / 2.4 x 3 x 1.2 in
Weight 0.07 kg / 0.15 lbs
Ingress Protection IP22
Certificates CE compliant, RoHS compliant
Warranty 2 years
12
www.phocos.com Subject to change without noticeCML-USB (5-20 A)
Solar Charge Controllers w/ USB Charging Output
Technical Drawing
100 mm
80 mm 32 mm
Product Introduction Technical Data
The CML-USB series is designed for-low cost applications and is Type CML-USB-05 CML-USB-10 CML-USB-20
ideal for small solar systems in need of a low battery disconnect
System Voltage 12 / 24 V auto recognition
feature. The electronic circuit is equipped with a microcontroller
Max. Charge/Load Current 5A 10 A 20 A
that provides high-efficiency charging technology together with
a number of outstanding features like status display, warning and Float Charge 13.8 / 27.6 V (25 oC)
safety functions. Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
14.4 / 28.8 V (25 °C), 0.5 h daily
Boost Charge
Leisure and rural electrification systems are the typical applications activation: battery voltageCIS-N (10-20 A)
Solar Charge Controller w/ Lighting Control
Technical Drawing
20 mm
64 mm
82 mm
Product Introduction Technical Data
The CIS-N was especially developed to deliver optimum
Type CIS-N-10 CIS-N-20
performance in industrial PV systems in demanding environments.
System Voltage 12 / 24 V auto recognition
It features 4-stage, series-switching PWM charge regulation and
Max. Charge/Load Current 10 A 20 A
is fully programmable via infrared devices (CIS-CU or MXI-IR and
Float Charge 13.8 / 27.6 V (25 °C)
CISCOM software).
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
The CIS-N includes convenient and advanced lighting control,
14.4 / 28.8 V (25 °C), 2 h
which allows the user to decide whether they want the automatic Boost Charge
activation: battery voltage < 12.3 / 24.6 V
lighting control with LED dimming to be time or low-voltage 14.8 / 29.6 V (25 °C), 2 h
activated. Equalization Charge activation: battery voltage < 12.1 / 24.2 V
(at least every 30 days)
Product Features and Functions 11.0–12.0 / 22.0–24.0 V (by SOC)
Deep-Discharge Protection
• Works in 12 or 24 V systems (auto recognition) 11.0-11.9 / 22.0-23.8 V (by voltage)
Reconnect Level 12.8 / 25.6 V
• Fully programmable charge/discharge program via infrared
(CIS-CU or MXI-IR and CISCOM software) Overvoltage Protection 15.5 / 31.0 V
• Timed and low-voltage dimming settings Undervoltage Protection 10.5 / 21 V
Min. Operating Voltage 9 V / 18 V
• Dimming interface for external LED drivers
Range of Battery Voltage for
• Fully potted (IP68) aluminum housing 9.0 to 15.5 V / 18.0 to 31.0 Vdc
Operation
• UL1741/Class I Div. 2 certified Load Output Voltage Range 11.0 to 15.5 / 22.0 to 31.0 Vdc
• Infrared-programmable load timing feature with dimming, ideal Max. PV Panel Voltage 30 V / 50 V
for lighting systems Temperature Compensation -25 mV/K (12 V), -50 mV/K (24 V)
• Modifications available upon request Idle Self-Consumption 5–8 mA / 6–10 mA
Optional Accessories Grounding Common Negative
Ambient Temperature −40 to +60 °C
CIS-CU
Max. Altitude 4,000 m above sea level
• Infrared remote control programming accessory
Battery Type Lead acid (gel, AGM, flooded) adjustable
MXI-IR
Wire Length 20 cm / 7.9 in
• Infrared to USB programming accessory and interface
to CISCOM software Wire Cross Section 2.5 mm2 (AWG 13)
Dimensions (WxHxD) 82 x 64 x 20 mm / 3.2 x 3 x 1 in
The CIS-N is NRTL certified Weight 0.15 kg / 0.33 lbs
UL listed to UL1741 and CSA C22.2 No. 107.1-16. Ingress Protection IP68
UL listed to ANSI/ISA 12.12.01 and CSA C22.2
CE compliant, RoHS compliant, UL1741
No. 213-15. Certificates
listed, ANSI/ISA 12.12.01 listed
E497008 Photovoltaic Charge Controller Warranty 5 years
E490503 Photovoltaic Charge Controller for use in
Hazardous Locations
Class 1, Div. 2 Groups A-D
14
www.phocos.com Subject to change without noticeECO-N (10 A)
Solar Charge Controller
Technical Drawing
8787
mm 16 mm
51
Product Introduction Technical Data
Phocos’ ECO-N solar charge controller is the perfect option for Type ECO-N
any low-power application requiring superior resistance to the System Voltage 12 / 24 V auto recognition
elements. Its small size, reliability, and price make it a great solution Max. Charge/Load Current 10 A
for a wide range of projects. Float Charge 13.8 / 27.6 V (25 °C)
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
The ECO-N is equipped with the low-voltage disconnect feature.
14.4 / 28.8 V (25 °C), 2 h
It is fully protected electronically, and has LEDs that communicate Boost Charge
activation: < 12.3 / 24.6 V
charge, battery and load status. Deep-Discharge Protection 11.0 / 22.0 V
Overvoltage Protection 15.5 / 31.0 V
Product Features
Undervoltage Protection 10.5 / 21.0 V
• Same model can be used in 12 or 24 V systems (fewer
Max. PV Panel Voltage 30 / 50 V
components to stock)
• 3-stage charging: main, boost and float charge Temperature Compensation -25 mV/K (12 V); -50 mV/K (24 V)
• Deep-discharge protection Idle Self-Consumption 4 mA
• PWM series regulation (PV panel is not short-circuited) Grounding Common Negative
• Integrated temperature compensation Ambient Temperature -40 to +60 oC
• Fully electronically protected against: panel surge voltage, Max. Altitude 4,000 m above sea level
wrong polarity (PV panel or battery), overload and short circuit Battery Type Lead acid (gel, AGM, flooded)
at load
Wire Cross Section 2.5 mm2 (AWG 13)
• Three LEDs indicate: charge status, state-of-charge (SOC), low-
voltage disconnection (LVD), overload/short circuit Dimensions (WxHxD) 87 x 51 x 16 mm / 3.4 x 2 x 0.63 in
• IP68 ingress protection Weight 0.11 kg / 0.24 lbs
• Common Negative Ingress Protection IP68
Certificates CE compliant, RoHS compliant
Warranty 5 years
15
Subject to change without notice www.phocos.comECO-N-T Series (10-20 A)
Solar Charge Controller
Technical Drawing
20 mm
100 mm
61 mm
Product Introduction Technical Data
Phocos’ ECO-N-T is a cost effective solution for many challenging Type ECO-N-10-T ECO-N-20-T
solar applications. Its compact size allows it to fit well in small spaces.
System Voltage 12 / 24 V auto recognition
The industrial grade ECO-N-T is fully encapsulated, which protects
Max. Charge/Load Current 10 A 20 A
the circuit board from corrosion. This unit also features UL and
other certifications, proving it is a robust charge controller that will Float Charge 13.8 / 27.6 V (25 °C)
perform well in a variety of harsh environments. Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
14.4 / 28.8 V (25 °C), 2 h
Boost Charge
The ECO-N-T is versatile and offers the flexibility of operating with activation: < 12.3 / 24.6 V
12 or 24 V systems. This reliable charge controller is simple to use, Deep-Discharge Protection 11.0 / 22.0 V
as it requires no user programming and has easy to interpret LEDs. Overvoltage Protection 15.5 / 31.0 V
The ECO-N-T will protect your batteries from overcharging and over
Undervoltage Protection 10.5 / 21.0 V
discharging, making for a strong return on investment.
Range of Battery Voltage for
9.0 to 15.5 V / 18.0 to 31.0 Vdc
Operation
Product Features
Load Output Voltage Range 11.0 to 15.5 / 22.0 to 31.0 Vdc
• Ideal for almost any off-grid PV application
Max. PV Panel Voltage 30 / 50 V
• Same model can be used in 12 or 24 V systems (fewer
Temperature Compensation -25 mV/K (12 V); -50 mV/K (24 V)
components to stock)
Idle Self-Consumption 4 mA
• Fully potted PCB
Grounding Common Negative
• Rugged housing with corrosion-resistant screw terminals
Ambient Temperature -40 to +60 °C
• Simple 3-LED system status interface
Max. Altitude 4,000 m above sea level
• Install only requires a flathead screwdriver
Battery Type Lead acid (gel, AGM, flooded)
• UL1741/Class I Div. 2 certified
Max. Wire Cross Section 10 mm2 (AWG 8)
Dimensions (WxHxD) 100 x 61 x 20 mm / 4 x 2.4 x 0.80 in
The ECO-N-T is NRTL certified
Weight 0.16 kg / 0.35 lbs
UL listed to UL1741 and CSA C22.2 No. 107.1-16.
UL listed to ANSI/ISA 12.12.01 and C22.2 Ingress Protection IP68 (case), IP21 (terminals)
No. 213-15.
CE compliant, RoHS compliant, UL1741
Certificates
listed, ANSI/ISA 12.12.01 listed
E497008 Photovoltaic Charge Controller
E490503 Photovoltaic Charge Controller for use in Warranty 5 years
Hazardous Locations
Class 1, Div. 2 Groups A-D
16
www.phocos.com Subject to change without noticeCXNup Series (10-40 A)
Solar Charge Controller w/ Datalogging/LCD
Technical Drawing
101 mm
103 mm
32 mm
Product Introduction Technical Data
The CXNup series is a highly intelligent charge controller family for Type CXNup10 CXNup20 CXNup2B* CXNup40
a wide range of applications. It features an intuitive user interface System Voltage 12 / 24 V auto recognition
and stores up to two (2) years of valuable system performance data,
Max. Charge Current 10 A 20 A 20 A / 20 A 40 A
which is accessible via the LCD and PhocosLink software.
Load Current 10 A 20 A N/A 40 A
Real-time battery voltage, battery state-of-charge (SOC) in percent, Float Charge 13.8 / 27.6 V (25 °C)
charge and load current, and system status are clearly displayed on Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
the large, backlit LCD. The CXNup2B offers the possibility to charge 14.4 / 28.8 V (25 °C), 2 h
Boost Charge
two independent batteries with up to 20 A. All other variants offer a activation: battery voltage < 12.3 / 24.6 V
USB port to charge mobile phones, tablets and other USB devices. 14.8 / 29.6 V (25 °C), 2 h
Optional acoustic battery alarms and programmable street light Equalization Charge activation: battery voltage
settings are also standard.CIS-N-LED (10-20 A)
Solar Charge Controller w/ integrated LED Driver
Technical Drawing
22 mm
92 mm
99 mm
Product Introduction Technical Data
The CIS-N-LED is a 3-in-1 solution that increases lifetime, reliability, CIS-N-LED- CIS-N-LED- CIS-N-LED-
efficiency and cost effectiveness. It is the perfect charge controller Type
1050 1400 2800
for solar lighting applications such as streetlights or bus shelters, and System Voltage 12 / 24 V auto recognition
its motion sensor interface capabilities regulate LED brightness to
Max. Charge Current 20 A (30 A, ≤ 50 °C*)
conserve energy.
Float Charge 13.8 / 27.6 V (25 °C)
To further conserve energy and extend the system’s lifetime, the
Main Charge 14.4 / 28.8 V (25 °C), 0.5 h daily
CIS-N-LED has two low voltage disconnect levels. The levels can
14.4 / 28.8 V (25 °C), 2 h
be programmed using one of Phocos' handheld remote control Boost Charge
activation: battery voltage < 12.3/24.6 V
accessories; the CIS-CU or the MXI-IR and our free CISCOM PC
14.8 / 29.6 V (25 °C), 2 h; activation: battery
software. Equalization Charge
voltage < 12.1/24.2 V (at east every 30 days)
Product Features Deep-Discharge Protection
11.00-12.02 / 22.00-24.04 V (by SOC)
11.0-11.9 / 22.0-23.8 V (by voltage)
• Combines 3 functions in one: • True color PWM dimming
charge controller + flexible timer Reconnect Level 12.8 / 25.6 V
• Fully protected by the
+ LED driver Overvoltage Protection 15.5 / 31.0 V
encapsulated case, which
• Developed especially for rough increases lifetime and reliability Undervoltage Protection 10.5 / 21.0 V
environments, solar LED lamps, and reduces costs Max. PV Panel Voltage 30 / 50 V
and solar LED streetlights
• Auto-protection function: two Temperature -25 mV/K (12 V);
• Flexible dimming functions low-voltage disconnects extend Compensation -50 mV/K (24 V)
• Input for motion detector (PIR) system operation time and Idle Self-Consumption 5-8 mA
reliability
• Small size: fits everywhere Grounding Common Negative
• Infrared-programmable load
• LiFePO4 available through Ambient Temperature -40 to +60 °C
timing feature + dimming is
CISCOM software Max. Altitude 4,000 m above sea level
ideal for lighting systems
• IP68 Ingress Protection Lead acid (gel, AGM, flooded),
LED Driver Data Battery Type
LiFePO4 adjustable
Type 1050 mA 1400 mA 2800 mA Wire Cross Section 2.5 mm2 (AWG 13)
15-49 V for 12 V system (5-15 LEDs in series), Dimensions (WxHxD) 92 x 99 x 22 mm / 3.6 x 4 x 1 in
Output Voltage
30-49 V for 24 V system (10-15 LEDs in series) Weight 0.25 kg / 0.55 lbs
Nominal Output Ingress Protection IP68 (1.5 m, 72 h)
1050 mA 1400 mA 2800 mA
Current Per String
Certificates CE compliant, RoHS compliant
Max. Load Power 45 W 60 W 60 W (12 V) / 120 W(24 V)
Warranty 5 years
Dimming Level 0 – 100 % (1.7 % steps)
* Without simultaneous LED output current at a maximum ambient temperature of 50 ° C.
4 – 30 V with respect to battery negative, >= 0.7 Please note: The CIS-N-LED features an integrated over-temperature protection that will
PIR-Input
mA; limited protection up to 50 V reduce the average charge current in case of too high temperatures.
Optional Accessories
MXI-IR CIS-CU
• Infrared to USB programming • Infrared remote control
accessory and interface to programming accessory
CISCOM software
18
www.phocos.com Subject to change without noticeDingo (20 A)
Programmable PWM Solar Charge Controller
Technical Drawing
137 mm
121 mm
45 mm
Product Introduction Technical Data
Phocos’ DINGO charge controller has a negative ground that makes Type D2020N
it a great option to be used in vehicles. Its communication interface System Voltage 12 / 24 / 32 / 36 / 48 V selectable
uses the MODBUS protocol, which has been tried and tested in
Max. Charge/Load Current 20 A
harsh environments.
Float Charge 13.0 V - 60.0 V (adjustable)
The DINGO’s large memory tracks data such as charging Ah, load Ah, Boost Charge 13.5 V - 66.0 V (adjustable)
battery voltage range and the daily state of charge for 512 days. The 14.0 V - 68.0 V (adjustable)
Equalization Charge
data of the past 99 days can be accessed directly using (at least every 30 days)
the built-in LCD display with LED backlighting. Deep-Discharge Protection 10.0 V - 50.0 V (adjustable)
Reconnect Level 11.0 V - 64.0 V (adjustable)
Product Features and Functions Max. PV Panel Voltage 100 V
• User-programmable charge regime and low-voltage disconnect Temperature Compensation -5 mV/K per cell (adjustable)
• Powerful event control feature can be programmed for the load Idle Self-Consumption 9 mA (12 V) - 26 mA (60 V)
port and/or a general purpose, voltage-only port Grounding Common Negative
• Up to 512 days of datalogging Ambient Temperature -20 to +55 °C
• Backlit LCD shows real time and 99 days of historical data Max. Altitude 4,000 m above sea level
• Auto generator start feature ideal for backup diesel and fuel cell
Battery Type Lead acid (AGM, gel, flooded) (selectable)
gensets
Datalogger 512 days
• Terminals can be configured for diversion load controllers for
wind/hydro charging inputs Max. Wire Cross Section 16 mm2 (AWG 6)
• Remote monitoring with accessories and modem Dimensions (WxHxD) 137 x 121 x 45 mm / 5.4 x 4.8 x 1.8 in
Weight 0.45 kg / 1 lb
Ingress Protection IP20
Optional Accessories
Warranty 5 years
D232 - RS232 Interface DT - Remote Temperature Sensor
DUSB - USB Interface DTB - Remote (bolt on)
Temperature Sensor (neoprene)
DNet - Ethernet Adapter
SHUNT - External Current Shunt
DSA - External Shunt Adapter
PRISM - PC Software
19
Subject to change without notice www.phocos.comSPS Series (100-300 A)
Industrial Telecom Charge Controllers
Technical Drawing
400 mm
500 mm
482.5 mm
177.5
Rack mount Cabinet Mount
Product Introduction Technical Data
The SPS series solar charge controllers are advanced electronic Type SPS 100 SPS 200 SPS 300
systems for solar powered applications in remote locations, such
System Voltage 12 / 24 / 48 V versions
as telecommunication sites. They prevent overcharging, reduce
water loss in the battery electrolyte and prevent deep discharge. Max. Charge/Load Current 100 A 200 A 300 A
These features extend battery life considerably. Float Charge 12-15 / 24-30 / 48-60 V (adjustable)
Boost Charge 13.5-17 / 27-34 / 54-68 V (adjustable)
The SPS system’s simple modular construction enables optimal
Boost Charge Activation 12-13.5 / 24-27 / 48-54 V (adjustable)
performance while also providing more features than any other
controller in its class. Additionally, slow-switching regulation Deep-Discharge Protection 11-11.75 / 22-23.5 / 44-47 V (adjustable)
minimizes EMI emissions, making the SPS system ideal for telecom Overvoltage Protection Adjustable
applications. Max. PV Panel Voltage 23.5 / 47.5 / 94 V
-30 mV/K (12 V), -60 mV/K (24 V),
Product Features and Functions Temperature Compensation -120 mV/K (48 V)
(with optional remote sensor)
• Ideal for large telecom sites up to 21 kWp
Idle Self-Consumption 60 mA (typical), 170 mA (max.)
• All control levels are fully adjustable and can be changed via
Grounding Common Positive or Negative available
serial interface
• Bank switching design creates ultra-low EMI emissions Ambient Temperature -15 to +55 °C
• Two-stage boost/float charging with low heat generation Max. Altitude 5,000 m above sea level
• Setup data stored in non-volatile EEPROM memory Battery Type Lead acid (gel, AGM, flooded)
• Available in common positive and negative versions Battery: variable by version, up to
150 mm2
• Available in cabinet or rack mount configurations
Max. Wire Cross Section Solar: variable by version, up to 50 mm2
• Customizable to site requirements Load: 50 mm2
• Interface for additional alarms and generator control Alarms: 1 mm2
• Configurable for remote monitoring Cabinet Dimensions (WxHxD) 400 x 500 x 240 mm / 19.7 x 15.8 x 9.5 in
Rack Dimensions (WxHxD) 482.5 x 177.5 x 285 mm / 19 x 7 x 11.3 in
Weight 16 kg / 35.3 lbs
Ingress Protection IP66 cabinet
Certificates CE compliant, RoHS compliant
Warranty 5 years
20
www.phocos.com Subject to change without noticeNOTES
21
Subject to change without notice www.phocos.comAny-GridTM Hybrid Inverter Charger
22
www.phocos.com Subject to change without notice23 Subject to change without notice www.phocos.com
PSW-H (3 kW/5 kW)
Any-GridTM Hybrid Inverter Charger
Technical Drawing
NEW
309 mm 143 mm
478 mm
230 Vac models
Product Introduction
The Phocos Any-GridTM PSW-H Inverter Charger Series (Pure Sine
Wave Hybrid) represents Phocos’ most versatile line of inverters/ 309 mm 143 mm
chargers. Flexibility and reliability are key characteristics of this
product line, with a strong potential for cost saving opportunities
in real world conditions. The PSW-H converts DC (Direct Current)
energy into AC (Alternating Current), with multiple advantages
beyond standard inverters. This product includes an integrated
MPPT charge controller and can function as an AC to DC battery
charger, which provides flexible energy access solutions in a broad 478 mm
range of applications.
The battery can be charged from solar and/or an AC source (public
grid or generator), with easily programmable priorities. The PSW-H
can function without an AC source or alternatively even without
solar, as a pure uninterruptible power supply (UPS). When the utility
grid or AC generator fails, the PSW-H immediately switches to ‘Off-
Grid’ mode within 10 ms (typical, in UPS mode) to securely power
the loads at all times. Solar can be set as the priority energy source
to save electricity costs. 120 Vac model
The Any-Grid PSW-H can function in a battery-free mode. In
this mode, for installations with stable public grids, grid energy
consumption can be reduced without the need to invest in a costly
battery bank. Additionally, power can be supplied directly to loads PhocosLink App
from the grid and solar simultaneously.
This unit comes with a quality, integrated MPPT charge controller.
The controller accepts particularly high PV voltages, allowing many
PV modules to be connected in series, decreasing installation cost
and avoiding combiner boxes. Up to 9 inverters can be connected
in parallel or 3-phase for up to 45 kW of synchronized AC power.
24
www.phocos.com Subject to change without noticePSW-H (3 kW/5 kW)
Any-GridTM Hybrid Inverter Charger
Product Features
• Flexible, advanced features with options to solve many common • Detachable display / communication unit with 6 LEDs and an
challenges in the field intuitive LCD screen
• Integrated high-voltage MPPT charge controller. The high-voltage • High level of connectivity: BLE, USB-OTG (on-the-go), CAN Bus, RS-
PV connection means in most scenarios the PV modules can 485, RS-232, relay for generator start
simply be connected in series of one or two strings, avoiding costly • Datalogger with up to 60 days of data storage
combiner boxes and string fuses or diodes, thus reducing total • Store or load parameters via USB for quick configuration
system cost
• Integrated buzzer for error indications
• Integrated AC battery charger
• Galvanic isolation of battery allows positive or negative grounding
• Charge controller functions even if inverter is turned off to keep
• Up to 9 inverters can be connected in parallel or 3-phase for up to
batteries fully charged
45 kW of synchronized AC power
• Compatible with Lithium batteries
• Washable filter reduces dust buildup in the inverter
• Functions without an expensive battery to reduce energy
consumption from the grid with minimal investment
What is Any-Grid?
Traditionally, the energy industry defines power systems relative to their access to the grid as Off-Grid or On-Grid. At
Phocos, we believe energy access should be available under ‘Any-Grid’ conditions whether you have full or partial access
to renewable energy and/or grid power, and if energy sources are unreliable. The Phocos Any-Grid Hybrid Inverter
Charger Series provides flexible energy access solutions that optimize the use of locally available energy resources that
can adapt as access to resources changes over time.
Any-Grid (Off-Grid and/or On-Grid) Capability
AC Loads
PV Panels (optional) Public Grid (optional)*
Battery (optional) Generator (optional)*
Phocos Any-Grid Removable Display *Any-Grid accepts one AC input
Hybrid Inverter Charger
(Up to 9 units in parallel or 3-phase)
25
Subject to change without notice www.phocos.comPSW-H (3 kW/5 kW)
Any-GridTM Hybrid Inverter Charger
Technical Data
Type PSW-H-3KW-120/24V PSW-H-3KW-230/24V PSW-H-5KW-230/48V
Output Waveform Pure Sine Wave
System Voltage 24 Vdc 48 Vdc
Rated Power 3000 VA / 3000 W 5000 VA / 5000 W
Max. Charge Current (PV) 80 Adc
Max. Charge Current (AC) 80 Adc
Max. Total Charge Current 80 Adc
Max. AC Input Current 40 Aac 30 Aac 40 Aac
Float Charge 27.6 Vdc (adjustable) 55.2 Vdc (adjustable)
Boost Charge 28.8 Vdc (adjustable) 57.6 Vdc (adjustable)
Equalization Charge 29.6 Vdc (adjustable) 59.2 Vdc (adjustable)
Deep-Discharge Protection 22 Vdc (adjustable) 44 Vdc (adjustable)
Reconnect Level 25.6 Vdc (adjustable) 51.2 Vdc (adjustable)
Overvoltage Protection 33 Vdc 66 Vdc
Undervoltage Protection 18.8 Vdc 37.5 Vdc
Battery Discharge Current Re- 167 Adc continuous 140 Adc continuous 168 Adc continuous
quirement 334 Adc surge (5s) 280 Adc surge (5s) 336 Adc surge (5s)
Max. PV Panel Voltage 250 Vdc 450 Vdc
PV Panel MPP Voltage 90 ~ 230 Vdc 90 ~ 430 Vdc 120 ~ 430 Vdc
Max. Usable PV Power 2400 W 4000 W (2400 W for battery charging) 4800 W
Max. PV Array Power 3000 Wp 5000 Wp 6000 Wp
AC Frequency 50 / 60 Hz auto recognition
AC Output Voltage 110 ~ 120 Vac ± 5% (adjustable) 220 ~ 240 Vac ± 5% (adjustable)
Surge Power 2x rated power for 5 seconds
Extensibility Up to 9 units in parallel or 3-phase
Inverter Efficiency (from Battery) > 90 % peak > 91 % peak > 93 % peak
Inverter Efficiency (from PV) > 96 % peak
Idle Self-Consumption < 40 W on, < 14 W Green Mode
Grounding Galvanically isolated battery allows positive or negative battery grounding
Ambient Temperature -10 to +50 oC
Storage Temperature & Humidity -15 to +60 °C, 5-95 % (non-condensing)
Max. Altitude 4,000 m above sea level, 1 % power de-rating per 100m above 1,000 m above sea level
Battery Type Lead acid (gel, AGM, flooded), Lithium
Datalogger 60 days
Max. Wire Cross Section Battery: 50 mm² (AWG 0), PV: 16 mm² (AWG 4), AC: 10 mm² (AWG 7)
Dimensions (WxHxD) 478 x 309 x 143 mm / 18.8 x 12.2 x 5.6 in
Weight 12 kg / 27 lbs 11 kg / 24 lbs 11.8 kg / 26 lbs
Ingress Protection IP21
Certificates CE compliant, RoHS compliant
Warranty 2 years
26
www.phocos.com Subject to change without noticeNOTES
27
Subject to change without notice www.phocos.comOff-Grid Inverters
28
www.phocos.com Subject to change without notice29 Subject to change without notice www.phocos.com
PSW Series (500-3000 W)
Pure Sine Wave Inverters
Technical Drawings
325 mm
255 mm
171 mm
90 mm
90 mm
186 mm
PSW-500/700 PSW-1000
426 mm
Product Introduction
The Phocos PSW (Pure Sine Wave) inverter series converts DC (Direct
Current) energy from solar and other renewable sources, into AC 105 mm
152 mm
(Alternating Current) power to operate most standard appliances. These
units are highly efficient and have a long lifespan to maximize their
value in everyday applications. Pure sine wave power is a sophisticated
technology that protects even the most sensitive electronics, making PSW-3000
it ideal for many modern appliances like TVs, computers, digital clocks, Technical Data
various battery chargers, audio equipment, lamps, and inductive loads
like brushless motors, to name a few. Common specifications for all inverters
Output Waveform Pure Sine Wave (THDNOTES
31
Subject to change without notice www.phocos.comDC Lighting/Refrigeration
32
www.phocos.com Subject to change without notice33 Subject to change without notice www.phocos.com
FR Series (104/170/240 L)
DC Chest Refrigerator/Freezer
Technical Drawing
914
mm 114
5m
m
755
850
m
FR170 0m FR240
68 685 m
mm 0m
69
Product Introduction 850
The Phocos FR Series provides flexibility to our customers, creating a
valuable solution for various applications. In the field, these units can
be used with 12 V or 24 V batteries, and can operate as a refrigerator
or freezer (by simply adjusting the thermostat). The FR series units FR100
m
contain a maintenance-free brushless DC compressor for direct 0m
59
connection to a battery and do not require an inverter to operate.
Energy-efficient features such as extra-thick insulation and a lockable Product Features
lid make them especially suited for solar-powered applications. • Works as a fridge or freezer with adjustable thermostat
These DC appliances have an easy to clean inner lining. A run-off • Does not require an inverter
plug allows easy de-icing for the FR100. The FR170MP and FR240MP • Works with both 12 / 24 V systems (auto recognition)
models also include space for a battery with their integrated battery • High-efficiency cooling
compartment. • Environmentally-friendly refrigerant
• Hanging basket(s) included for better space utilisation inside
Technical Data
Type FR100 FR170MP FR240MP
System Voltage 12 / 24 V auto recognition
Temperature Range -18* to +8 °C / -0.4* to +46.4 °F -12* to +6 °C / +10.4* to +42.8 °F
PV Panel Size 70 W 80 W 100 W
108 Wh / day (fridge**), 97 Wh / day (fridge**), 104 Wh / day (fridge**),
Energy Consumption at +21 °C / +70 °F
553 Wh / day (deep-freezer**) 296 Wh / day (freezer**) 398 Wh / day (freezer**)
181 Wh / day (fridge**), 166 Wh / day (fridge**), 218 Wh / day (fridge**),
Energy Consumption at +32 °C / +90 °F
659 Wh / day (deep-freezer**) 440 Wh / day (freezer**) 552 Wh / day (freezer**)
Content (Net Capacity) 104 L 170 L 240 L
Refrigerant R600a R134a
Ambient Temperature +10 to +43 °C / +50 to +104 °F +10 to +43 °C*** / +50 to +104 °F***
Door Type Top opening
1145 x 850 x 690 mm /
Cabinet Dimensions (WxHxD) 685 x 850 x 590 mm / 27 x 33.5 x 23.2 in 914 x 755 x 680 mm / 36 x 29.7 x 26.8 in
45 x 33.5 x 27.2 in
900 x 671 x 440 mm /
Inner Dimensions (WxHxD) 505 x 640 x 375 mm / 19.9 x 25.2 x 14.8 in 671 x 670 x 436 mm / 26.4 x 26.4 x 17.2 in
35.4 x 26.4 x 17.3 in
Battery Compartment Dimensions
n/a 250 x 200 x 220 mm / 9.8 x 7.9 x 8.7 in
(WxHxD)
Weight 29 kg / 64 lbs 50 kg / 110 lbs 57.5 kg / 126.8 lbs
Warranty 2 years 5 years
* Up to +38 °C / +100 °F ambient temperature.
** Measured at +8 °C / +46.4 °F (fridge) and -18 °C / -0.4 °F (deep-freezer) temperatures.
*** It is recommended to keep the fridge / freezer at maximum +32 °C / +90 °F ambient temperature or below.
34
www.phocos.com Subject to change without noticeSL LED Lamps (3-9 W)
DC High Power LED Lamps
Technical Drawing
80 mm
Ø80
65 mm
Ø65
55 mm
Ø55
5045
mm
Ø45
145 mm
142
115 mm
115
105 mm
102
95 mm
81
SL-09 SL-07 SL-05 SL-03
Product Introduction Product Features
The Phocos solar SL LED lamps provide high illumination levels with • Extremely low power consumption
very low power consumption and a long lifespan. This is ensured by an • High luminous efficiency
aluminum PCB connected to a heatsink for optimal cooling. • Lifespan 50,000 h
• Infinite number of switching cycles
The DC LED lamps can be used directly in 12 V or 24 V battery or solar
systems without any ballast. The lamps have a standard E27 socket.
Technical Data
Type SL-03 SL-05 SL-07 SL-09
Voltage Range 10.5 – 30 V
Power Consumption 3W 5W 7W 9W
Supply Current (±10%) 220 mA at 12.5 V 360 mA at 12.5 V 500 mA at 12.5 V 650 mA at 12.5 V
Luminous Intensity > 250 lm > 500 lm > 630 lm > 900 lm
Luminous Efficiency > 115 lm/W
Irradiation Angle 120 - 140 °
Light Color Cool white (typical: 5,600 K)
Ambient Temperature –20 to +60 °C
Humidity Max. 95 % non-condensing
Socket E27 (Edison)
Diameter 50 mm / 2 in 55 mm / 2.2 in 65 mm / 2.6 in 80 mm / 3.1 in
Length 95 mm / 3.7 in 105 mm / 4.1in 115 mm / 4.5 in 145 mm / 5.7 in
Ingress Protection IP30
Warranty 2 years
35
Subject to change without notice www.phocos.comTurnkey Solutions
36
www.phocos.com Subject to change without notice37 Subject to change without notice www.phocos.com
SHS Kits
Solar Home System (Not available for sale in Europe)
Technical Drawing
Product Introduction Technical Data
Phocos proudly offers solar home system (SHS) kits to bring Type SHS-5W SHS-10W SHS-20W
compact, autonomous power to remote locations. SHS kits are
Charging Type Maximum Power Point Tracking (MPPT)
designed for easy operation and selection, with three different
kit wattage options available to meet various energy and budget System Voltage 12.8 V
requirements. Each kit converts the sun’s energy into electricity, Max. Charge Current 1000 mA 1500 mA 3000 mA
to power various DC electrical appliances (from lights to fans to Max. Discharge Current 1500 mA 2600 mA 5000 mA
mobile phone chargers). Phocos developed these SHS kits to
Operation Runtime 1 lamp: 15 h*, 2 lamps: 8 h*, 3 lamps: 5 h*
offer an economical solution that provides reliable, safe, quiet, and
maintenance-free off-grid power. Solar Input Power 5 Wp 10 Wp 20 Wp
DC LED Lamps 1W 2W 3W
The eco-friendly SHS kit series has technology that increases
each kit’s charging efficiency for optimum performance. Using Open Ciruit Voltage 21 V
energy dense Lithium technology (one of the safest chemistries: Battery Capacity (approx.) 20 Wh 40 Wh 75 Wh
LiFePO4), combined with energy efficient DC LED lighting, Phocos Overvoltage Protection 14.6 V ± 0.1 V
has created an innovative packaged solution to perform at the
Undervoltage Protection 11.0 V ± 0.1 V
highest standards. The SHS series kits also include features like LED
indicators, battery status information and protection functions to Green: solar charging; Yellow: battery SOC;
LED Indicators
Red: fault indication
help maximize the life of the equipment.
0 to 50 °C while charging,
Ambient Temperature
Product Features -20 to 55 °C while discharging
• Compact, portable, lightweight • Maintenance-free Battery Type LiFePO4
• Charges 12.8 V battery (integrated) • Efficient DC LED lighting USB Charging Port 5.2 V, 1000 mA
• LiFePO4 battery offers long cycle • Regulates current and Load Terminals DC jack 6.5 mm, 3 output terminals
life, is safe and energy dense voltage for longer battery life 375 x 200 x 130 mm/
375 x 200 x 130 mm/
Dimensions (WxHxD) 14.8 x 7.9 x 5.1 in
• USB charging port transforms the • Low-voltage disconnect 14.8 x 7.9 x 5.1 in**
(without panel)
ECO Pico into a Powerbank features (LVD)
2.57 kg / 2.30 kg / 2.63 kg /
• MPPT technology (automatically • Load short circuit/ overload Weight
5.66 lbs** 5.07 lbs 5.80 lbs
maximizes power output) protection
Ingress Protection IP20
• Electronic protection: PV reverse • Battery protection: HVD and
Warranty 2 years
polarity, reverse current flow at LVD, inbuilt BMS circuit
night, surge & transient protec- • Battery status through LEDs *Conditions apply: back up time varies and depends upon the ambient temperature and
tion, over current, battery high operating conditions.The run time estimate does not account for mobile phone charging.
and low voltage protection, **With PV panel inside
battery short circuit
Accessories Included in Kits
• Solar panel with cable (1 pc) (5 Wp, 10 Wp or 20 Wp)
• Charge controller, integrated LiFePO4 battery (1 pc)
• DC LED lamps (3 pcs) (1 W, 2 W or 3 W)
• E-27 lamp holder assembly with switch (3 pcs)
• Mobile charging adapter (1 pc)
38
www.phocos.com Subject to change without noticeECO Pico
Portable Solar Lamp and Turnkey System
Technical Drawing
13.5 cm
6.5 cm 3.5 cm
ECO Pico
1.25 cm
Product Introduction Technical Data
The ECO Pico has the power capacity of a solar home system and Type ECO Pico
the flexibility of a portable LED torch flashlight. It uses a highly
System Voltage 3.25 V
efficient LiFePO4 battery that is particularly long-lasting, allowing the
Max. Charge Current 2.20 A
system to provide up to 10 years of maintenance-free operation.
PV Panel Charge Current 0.58 A
The ECO Pico is extremely efficient, with an LED light supplying up Battery Capactiy 3.2 Ah
to 135 lm/W. This product has a potential lifespan of 50,000+ hours. Illuminance (Mode 1) 16 lm
Additional load outputs offer the flexibility to connect loads,
Illuminance (Mode 2) 88 lm
such as a mobile device, a radio or a small additional lamp. This
Illuminance (Mode 3) 200 lm
German-engineered, high quality product offers many years of
trouble-free reliability. Operation Runtime (Mode 1) 60 h
Operation Runtime (Mode 2) 10 h
Operation Runtime (Mode 3) 5h
Product Features
Output Voltage Range 2.8 - 3.6 V, 2
• Option for 16-200 lumen output PV Panel Power 2.5 Wp
• Compact and portable PV Panel Voltage 4.5 Vmp, 5.5 Voc
• Deep-discharge, overcharge, short circuit and overcurrent Ambient Temperature 0 to +50 oC
protection
Max. Altitude 4,000 m above sea level
• 3 step brightness switch
USB Charging Port 5 V +/- 10 %, 500 mA
• Low-battery mode
• Doubles as a ceiling lamp Dimensions 13.5 x 6.5 cm / 5.3 x 2.6 in
• Battery state of charge indicator Weight 0.17 kg / 0.38 lb
• Can be charged with a 2.5 Wp solar panel or laptop power Pollution degree 4
supply Ingress Protection IP54
• Lasts up to 60 hours on a full day charge (Mode 1) Certificates CE compliant, RoHS compliant
• USB charging port transforms the ECO Pico into a Powerbank
Warranty 2 years
• IP54 Ingress Protection
Accessories Included in Kits
• ECO Pico torch flashlight (1 pc)
• Lanyard (1 pc)
• 2.5 Wp solar panel (1 pc)
• USB cable (1 pc)
39
Subject to change without notice www.phocos.comWire Gauge Recommendations for Solar Installations
The distance between the battery and charge controller should be as short as possible to
minimize voltage drops due to resistance in the wiring.
Battery to Charge Controller
Phocos recommends the maximum voltage drop between the battery and charge controller
not exceed 0.1V in a 12V system and 0.2V in a 24V system.
Solar to Charge Controller
Phocos recommends the maximum voltage drop between the solar panel/array and the charge
controller should not exceed 1.0VDC in a 12V system and 2.0V in a 24V system.
The following tables contain a selection of possible combinations of minimum wire cross sections and
matching maximum wire lengths to limit the voltage drop due to resistance in wiring.
Charge Controller / Battery Charge Controller / PV-Module / Load
Min. Wire Cross Max Voltage Drop Min. Wire Cross Max Voltage Dro
Max Distance (m) Max Distance (m)
Current Section (mm2) (mm2) Section (mm2) (mm2)
12V 24V 12V 24V 12V 24V 12V 24V 12V 24V 12V 24V
1 1 2.5 1 0.07 0.18 5 5 1.5 1 0.60 1.80
5A 2 2 4 2.5 0.09 0.14 20 40 4 4 0.90 1.80
3 3 6 4 0.09 0.14 20 40 4 4 0.90 1.80
1 1 4 2.5 0.09 0.14 5 10 2.5 2.5 0.72 1.44
10A 2 2 6 4 0.12 0.18 10 20 4 4 0.90 1.80
3 3 10 6 0.11 0.18 20 30 10 6 0.72 1.80
1 1 6 4 0.12 0.18 5 10 6 4 0.60 1.80
20A 2 2 16 10 0.09 0.14 10 15 10 6 0.72 1.80
3 3 25 16 0.09 0.14 20 25 16 10 0.90 1.80
1 1 10 6 0.11 0.18 5 10 6 6 0.90 1.80
30A 2 2 16 16 0.14 0.14 10 15 10 10 1.08 1.62
3 3 25 25 0.13 0.13 20 25 25 16 0.86 1.69
1 1 16 10 0.09 0.14 5 10 20 10 .72 1.44
40A 2 2 25 16 0.12 0.18 10 20 16 16 0.90 1.80
3 3 35 25 0.12 0.17 20 30 35 25 0.82 1.73
1 1 16 10 0.11 0.18 5 10 10 10 0.90 1.80
50A 2 2 35 25 0.10 0.14 10 20 25 25 0.72 1.44
3 3 50 35 0.11 0.15 20 30 35 35 1.03 1.54
40
www.phocos.com Subject to change without noticeWire Gauge Recommendations for Solar Installations
Diameter Cross Section
Metric Cable Size (mm2) AWG
Inch mm mm2
50 1 0.289 7.35 42.4
35 2 0.258 6.54 33.62
3 0.229 5.83 26.67
25
4 0.204 5.19 21.15
5 0.182 4.62 16.75
16
6 0.162 4.11 13.30
7 0.144 3.67 10.55
10
8 0.128 3.26 8.37
9 0.114 2.91 6.63
6
10 0.102 2.59 5.26
11 0.0907 2.30 4.17
4
12 0.0808 2.05 3.31
13 0.0720 1.83 2.62
2.5
14 0.0641 1.63 2.08
15 0.0571 1.45 1.65
1.5
16 0.0508 1.29 1.31
17 0.0453 1.15 1.038
1.0
18 0.0403 1.024 0.823
19 0.0359 0.912 0.653
0.5 20 0.0320 0.812 0.518
21 0.0285 0.723 0.410
*Phocos strongly recommends installing an inline fuse as close to the battery terminal as possible. Fuse rating : charge current x 1.5 A.
Thank you for your business. The Phocos Global Network
is proud to be your Off-Grid partner.
41
Subject to change without notice www.phocos.comPhocos Group
Americas EMEA SAARC APAC
USA Germany India China
Phocos Americas, Inc. Phocos AG Phocos India Solar Pvt Ltd. Phocos China Ltd.
325 S. Euclid Ave., Ste. 101 Magirus-Deutz-Str. 12 Plot No. 8, 9 & 10, Room 1304, Qingdao International
Tucson, AZ 85719 USA 89077 Ulm Germany East Coast Road (E.C.R) Shipping Center,
Phone +1 520 777-7906 Phone +49 731 9380688-0 Krishna Nagar, Lawspet, No.66 Lianyungang Road,
Fax +1 520 882-3191 Fax +49 731 9380688-50 Puducherry 605 008 India Qingdao 266034, China
info.na@phocos.com info@phocos.com Phone +91 413 2972328 Phone +86 532 83837020
www.phocos.com www.phocos.com info-india@phocos.com info-china@phocos.com
www.phocos.com www.phocos.com
www.linkedin.com/company/phocos
Version: 2019-12-18
Subject to change without noticeYou can also read
