Lecture Notes in Networks and Systems - Volume 335 - Springer LINK
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Lecture Notes in Networks and Systems Volume 335 Series Editor Janusz Kacprzyk, Systems Research Institute, Polish Academy of Sciences, Warsaw, Poland Advisory Editors Fernando Gomide, Department of Computer Engineering and Automation—DCA, School of Electrical and Computer Engineering—FEEC, University of Campinas— UNICAMP, São Paulo, Brazil Okyay Kaynak, Department of Electrical and Electronic Engineering, Bogazici University, Istanbul, Turkey Derong Liu, Department of Electrical and Computer Engineering, University of Illinois at Chicago, Chicago, USA Institute of Automation, Chinese Academy of Sciences, Beijing, China Witold Pedrycz, Department of Electrical and Computer Engineering, University of Alberta, Alberta, Canada Systems Research Institute, Polish Academy of Sciences, Warsaw, Poland Marios M. Polycarpou, Department of Electrical and Computer Engineering, KIOS Research Center for Intelligent Systems and Networks, University of Cyprus, Nicosia, Cyprus Imre J. Rudas, Óbuda University, Budapest, Hungary Jun Wang, Department of Computer Science, City University of Hong Kong, Kowloon, Hong Kong
The series “Lecture Notes in Networks and Systems” publishes the latest developments in Networks and Systems—quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNNS. Volumes published in LNNS embrace all aspects and subfields of, as well as new challenges in, Networks and Systems. The series contains proceedings and edited volumes in systems and networks, spanning the areas of Cyber-Physical Systems, Autonomous Systems, Sensor Networks, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Aerospace Systems, Automation, Manufacturing, Smart Grids, Nonlinear Systems, Power Systems, Robotics, Social Systems, Economic Systems and other. Of particular value to both the contributors and the readership are the short publication timeframe and the world-wide distribution and exposure which enable both a wide and rapid dissemination of research output. The series covers the theory, applications, and perspectives on the state of the art and future developments relevant to systems and networks, decision making, control, complex processes and related areas, as embedded in the fields of interdisciplinary and applied sciences, engineering, computer science, physics, economics, social, and life sciences, as well as the paradigms and methodologies behind them. Indexed by SCOPUS, INSPEC, WTI Frankfurt eG, zbMATH, SCImago. All books published in the series are submitted for consideration in Web of Science. For proposals from Asia please contact Aninda Bose (aninda.bose@springer.com). More information about this series at https://link.springer.com/bookseries/15179
Andre Batako Anna Burduk • • Kanisius Karyono Xun Chen • • Ryszard Wyczółkowski Editors Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering Progress in Application of Intelligent Methods and Systems in Production Engineering 123
Editors Andre Batako Anna Burduk Liverpool John Moores University Wroclaw University of Science Liverpool, UK and Technology Wrocław, Poland Kanisius Karyono School of Civil Engineering Xun Chen and Built Environment General Engineering Research Institute Liverpool John Moores University Liverpool John Moores University Liverpool, UK Liverpool, UK Ryszard Wyczółkowski Faculty of Mechanical Engineering Silesian University of Technology Gliwice, Poland ISSN 2367-3370 ISSN 2367-3389 (electronic) Lecture Notes in Networks and Systems ISBN 978-3-030-90531-6 ISBN 978-3-030-90532-3 (eBook) https://doi.org/10.1007/978-3-030-90532-3 © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2022 This work is subject to copyright. All rights are solely and exclusively licensed by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface The GCMM is a major biennial international congress for widespread dissemination of knowledge in manufacturing, management, production engineering, maintenance predictive technologies and Industry 4.x. Recent events held in Australia (2018), China (2016), India (2014), New Zealand (2012) and Thailand (2010) were highly successful and attracted delegates from over 20 countries. GCMM2021 was special, for it was the first time, this global congress was held in Europe, in the UK, to celebrate the 30/31st anniversary of GCMM and to share new attainments in research and industrial practice between academic scholars and industry practitioners. This congress has always attracted high-quality research papers and continues to serve as a central hub where the world’s knowledge of manufacturing research is fused with industry strategy in a globalised market. GCMM2021 continued this tradition, though held online, it attracted over 200 scholars and higher regarded professionals from academia and industry around the world, USA, Australia, New Zealand, India, China, Southeast Asia, Africa and Europe. Regardless on the restrictive conditions imposed by the COVID, GCMM2021 has attracted scholars from over 16 countries. It attracted an equal number of male and female keynotes speakers that shared their experience with the young researchers and the challenges faced by women in academia and engineer- ing. A critical topic like “Women in engineering in academia: Are we there yet?” was expounded by Executive Dean of the Faculty of Engineering at Queensland University of Technology, Prof Anna Deletic, exploring the global challenge faced by women in various areas of human activities. GCMM2021 was organised and hosted jointly by Liverpool John Moores University and Wroclaw University of Science and Technology along with its ISPEM (Intelligent Systems for Production Engineering Maintenance). GCMM2021 has received a good support from its sponsors, namely the Vellore Institute of Technology (India), Zhengzhou University, Xi’ An university of Science and Technology (China) and Liverpool John Moores University (UK). v
vi Preface GCMM2021 benefited from the support of several associates: IAAST, (China), the IET (UK), QUT (Australia), Ford Motors Company (Liverpool) and Kawasaki (Liverpool) and Brunel University, UK. GCMM operates within a broad range of manufacturing sciences and covered five main streams, i.e. global manufacturing challenges, intelligent systems in production engineering and maintenance, management of production process, advances in materials and manufacturing and Industry 4.0, with, over forty topics. However, this issue is a collection of technical and research papers dedicated to intelligent methods in production engineering, providing new solutions for inno- vative factories of the future, advances in production and maintenance from the viewpoint of Industry 4.0. Therefore, this volume discusses the applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, along with elements of information systems and product development. This collection of new developments and advancement in intelligent control and optimisation system for production engineering will serve as a good companion to scholars, manufacturing companies, RTO to improve the efficiency of production systems. It forms an excellent basis for the development of intelligent manufac- turing system for Industry 4.0 digital and distributed manufacturing and factories for future. The papers presented in this volume were selected after meticulous review of three independent and international reviews, the reviewers had no acquaintance with the authors, and papers were sent to different countries avoiding the country of its origin. All papers were scored, and the reviewers gave their levels of confidence. In some doubtful cases such as borderline or contradicting reviews, and, where the level of confidence of the reviewers was low, papers were resent to two additional reviewers making a total of five reviews. With this stringent review process, over sixty per cent of the submitted papers were rejected, and this ensured the quality of the work presented here. GCMM2021 organising committee scrutinised further all the papers and awar- ded four prizes for the best technical papers, the best presenter and the best poster. GCMM2021 expresses its deep gratitude to all Sponsors for their generous financial contribution that help to run the conference online, to all the associates for their support, to the keynote speakers for their time and the high quality of the material presented and experience shared. Special gratitude is expressed to Chancellor of VIT Honourable Dr. Viswanathan, to Vice Chancellor of LJMU, Prof. Ian G Campbell and to Pro-vice Chancellor of LJMU, Prof. Keith George, to the LJMU corporate
Preface vii communication team, to the Conference Partners International—CPI, and, to all the scholars for their contributions. July 2021 Anna Burduk Andre D. L. Batako Xun Chen Kanisius Karyono Ryszard Wyczókowski
Organisation Organising Committee Patrons G. Viswanathan (Chancellor) VIT, India Chairs/Co-chairs Prasad K. D. V. Yarlagadda QUT, Australia Yong Ming Zhu Zhengzhou Univ., China Anthony Xavior VIT Univ., India Anna Burduk WUST, Poland Mike Riley Liverpool John Moores Univ., UK Andre D. L. Batako Liverpool John Moores Univ. Conference Chair Secretaries Xun Chen Liverpool John Moores Univ. Martin Sharp Liverpool John Moores Univ. United Kingdom Liverpool John Moores University Jin Wang Vijay Karunamoothei Paulo Lisboa Guang-Ming Zhang James Ren Jun Ren David Harvey Musa Bashir ix
x Organisation Rafid Al-Khaddar Ibijoke Idowu Martin Sharp Badr Abdullah Tahsin Opoz Alex Teng Mohammad Ateeq Other Universities Cheng Kai Brunel University Vadim Silberschimidt Loughborough Univ. Alison McMillan Glyndŵr Univ. Abdul-Majeed Mahamadu Univ. West of England Henry Abanda Oxford Brookes Univ. Arivazhagan Anbalagan Birmingham Univ. Poland Wrocław University of Science and Technology Joanna Helman Kamil Krot Tomasz Chlebus Anna Woźna Maria Rosienkiewicz Dagmara Łapczyńska Paweł Krowicki Kamil Musiał Tomasz Bêdza Małgorzata Rusiñska Joanna Kochañska Silesian University of Technology Cezary Grabowik Damian Krenczyk Aleksander Gwiazda Ryszard Wyczółkowski Krzysztof Kalinowski GCMM Board President G. Viswanathan (Chancellor) VIT Univ.
Organisation xi Secretary Prasad K. D. V. Yarlagadda, OAM, QUT Board Members Ayo Olofinjana Univ. of Sunshine Coast, Australia C. Brito (President) CRES, Brazil H. ElMaraghy Univ. of Windsor, Canada Yongming Zhu Zhengzhou Univ., China David Wang IAASET Shouqin Zhou CIMC Co., Ltd. H. Elwany Alexandria Univ., Egypt S. Tichkiewitch Domaine Univ., France K. Adjallah ENIM, Loraine Univ. Ing. P. Gümpel Fachochschule Konstanz, Germany Krishnanand Lanka NIT, India Ravichandran CEO, Lucas TVS L. Gopalakrishnan PSG & Sons Charities Walter C. K. Wong Berjaya Univ., Malaysia C. Acosta Universidad de las America-Pueba, Mexico E. De Bruijn Univ. of Twente, Netherlands Sarat Singamneni AUT, New Zealand Mark P. Taylor Univ. of Auckland Leszek A. Dobrzanski Science Centre ASKLEPIOS, Gliwice, Poland Korneliusz Pylak Lublin Univ. of Tech. Seeram Ramakrishna NUS, Singapore, Singapore Janez Kopac Univ. of Ljubijana, Slovenia E. Tovar Universidad Politechnica de Madrid, Spain Y.T. Im KAIST, South Korea Ill-Soo Kim Mokpo National Univ. T. Schelker Swiss College of Agriculture, Switzerland S. Butdee King Mongkutś Inst. of Tech., Thailand Batako D. L. Andre Liverpool John Moores Univ., UK K. S. Taraman Lawrence Technological Univ., USA Lal Tummala San Diego State Univ. International Scientific Committee Kondo Adjallah Université de Lorraine, France Baghal-Wadji Alireza Univ. Cape Town, South Africa Andrzej Ambroziak Wrocław Univ. of Science and Technology, Poland Dario Antonelli Politecnico di Torino, Italy Katarzyna Antosz Rzeszow Univ. of Technology, Poland Zbigniew Banaszak Koszalin Univ. of Technology, Poland
xii Organisation Josef Basl Univ. of West Bochemia, Czech Republic Ryszard Błażej Wrocław Univ. of Science and Technology, Poland Wojciech Bożejko Wrocław Univ. of Science and Technology, Poland Milan Brandt RMIT Univ., Australia Anna Burduk Wrocław Univ. of Science and Technology, Poland S. Butdee King Mongkut’s Inst. of Tech., Thailand Yan-Lin Cai Zhengzhou Univ., China Elegbede Charles A.O. Ariane Group, France Edward Chlebus Wrocław Univ. of Science and Technology, Poland Tomasz Chlebus Wrocław Univ. of Science and Technology, Poland Mariusz Cholewa Wroclaw Univ. of Science and Technology, Poland Melany M. Ciampi ING-PAED IGIP, Brazil Grzegorz Ćwikła Silesian Univ. of Technology, Poland Jacek Diakun Poznan Univ. of Technology, Poland Albert H. Ding Harbin Inst. of Tech. China Ewa Dostatni Poznan Univ. of Technology, Poland Luboslav Dulina Univ. of Zilina, Slovakia Bogdan Dybała Wrocław Univ. of Science and Technology, Poland A. Elaya Erumal Anna Univ., India Zhang Feihu Harbin Institute of Technology. China Kristofer Gamstedt Uppsala Univ., Sweden Arkadiusz Gola Lublin Univ. of Technology, Poland Filip Górski Poznan Univ. of Technology, Poland Cezary Grabowik Silesian Univ. of Technology, Poland Marta Grabowska Poznan Univ. of Technology, Poland Milan Gregor Univ. of Zilina, Slovakia Katarzyna Grzybowska Poznan Univ. of Technology, Poland Manoj Gupta NUS, Singapore B. Gurumoorthy IISc, Bengaluru, India Aleksander Gwiazda Silesian Univ. of Technology, Poland Adam Hamrol Poznan Univ. of Technology, Poland Joanna Helman Wroclaw Univ. of Science and Technology, Poland Małgorzata Poznan Univ. of Technology, Poland Jasiulewicz-Kaczmarek P. Jeyapandiarajan VIT, India Ma Jiang Shenzhen Univ., China
Organisation xiii Anna Jodejko-Pietruczuk Wrocław Univ. of Science and Technology, Poland J. Joel VIT, India Leszek Jurdziak Wrocław Univ. of Science and Technology, Poland Janusz Kacprzyk Polish Academy of Sciences, Poland Cheng Kai Brunel Univ., UK Krzysztof Kalinowski Silesian Univ. of Technology, Poland Komla Kassegne Univ. of Lomé, Togo Rafał Kasprzyk Military Univ. of Technology, Poland Jan Kaźmierczak Silesian Univ. of Technology, Poland Ill-Soo Kim Mokpo National Univ., South Korea Sławomir Kłos Univ. of Zielona Góra, Poland Ryszard Knosala Opole Univ. of Technology, Poland Farong Kou Xián Univ. of Science & Tech., China Edward Kozłowski Lublin Univ. of Technology, Poland Damian Krenczyk Silesian Univ. of Technology, Poland Kamil Krot Wrocław Univ. of Science and Technology, Poland Józef Kuczmaszewski Lublin Univ. of Technology, Poland Agnieszka Kujawiñska Poznan Univ. of Technology, Poland A. Senthil Kumar NUS, Singapore Ivan Kuric Univ. of Zilina, Słowacja Tomasz Kurzynowski Wrocław Univ. of Science and Technology, Poland Stanisław Legutko Poznan Univ. of Technology, Poland Long, Z. L. Harbin Institute of Technology, China Andrzej Loska Silesian Univ. of Technology, Poland Rafał Ładysz George Mason Univ., USA José Machado School of Engineering; Univ. of Minho, Portugal Geetha Manivasasagam VIT, Vellore, India Qinghua Mao Xián Univ. of Science & Tech., China Syed Masood Swinburne Univ. of Tech., Australia Uwe Meinberg Brandenburg Univ. of Technology, Germany Tomasz Nowakowski Wrocław Univ. of Science and Technology, Poland Małgorzata Olender Silesian Univ. of Technology, Poland Katarzyna Pactwa Wroclaw Univ. of Science and Technology, Poland Justyna Patalas-Maliszewska Univ. of Zielona Góra, Poland Midzodzi Pekpe University of Lille, France Dariusz Plinta Univ. of Bielsko-Biala, Poland Radha Prasadaraju MVGRCE, India P. Radhakrishnan PSGIAS, India Seeram Ramakrishna NUS, Singapore
xiv Organisation Ravichandran CEO, Lucas TVS, India Mathias Rehm Technical Univ. of Chemnitz, Germany Izabela Rojek Kazimierz Wielki Univ., Poland Maria Rosienkiewicz Wroclaw Univ. of Science and Technology, Poland Małgorzata Rusiñska Wrocław Univ. of Science and Technology, Poland Andrii Safonyk National Univ. of Water and Environmental Engineering, Ukraine P. Selvaraj ADA, Bengaluru, India Jarosław Sêp Rzeszow Univ. of Technology, Poland Hari Singh NIT, Kurukshetra, India Sarat Singamneni AUT, New Zealand Bożena Skołud Silesian Univ. of Technology, Poland Irina Smolina Wrocław Univ. of Science and Technology, Poland Agnieszka Stachowiak Poznan Univ. of Technology, Poland Dorota Stadnicka Rzeszow Univ. of Technology, Poland Antoni Œwiæ Lublin Univ. of Technology, Poland Peter Trebuna Technical Univ. of Kosice, Slovakia Lal Tummala San Diego State Univ., USA Zee Upton A*Star, Singapore Shuwen Wang Univ. of Shanghai for Sci. Tech. China Robert Waszkowski Military Univ. of Technology, Poland Cuie Wen RMIT Univ., Australia Sylwia Wrocław Univ. of Science and Technology, Werbiñska-Wojciechowska Poland Dorota Wiêcek Univ. of Bielsko-Biala, Poland Anna WoŸna Wrocław Univ. of Science and Technology, Poland Ryszard Wyczółkowski Silesian Univ. of Technology, Poland Liu Xiucheng Beijing Univ. of Tech., China Songmei Yuan Beihang University, Beijing, China Sun Yuwen Dalian University of Technology, China Xuhui Zhang Xiáan Univ. of Science & Tech., China Tao Zhang Xián Univ. of Science & Tech., China Yongming Zhu Zhengzhou Univ., China Nikolai Zubkov Baunam Univ., Moscow, Russia
Contents Optimization of Packaging Processes for Special Orders Using Process Activity Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Jacob Søe Mikkelsen, Justina Lydekaityte, and Torben Tambo The Construction of a Crude Oil Tanker Ship: A Life Cycle Assessment Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Georgios Papantoniou and Eduardo Blanco-Davis Evaluation of Palm Oil-Nano Particle Cutting Fluids on Turning of Inconel 718 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Sit Lu Fung Derek, Ezutah Udoncy Olugu, Cik Suhana Binti Hassan, V. Karunamoothei, and Kah Hou Teng Design and Fabrication of Laboratory Scale Carbon Dioxide Controlling Chamber for Leafy Vegetables . . . . . . . . . . . . . . . . . . . . . . 46 Chun Hau Kua, Norhafizah Amal Aisyah Yunos, Rafidah Petra, Fethma M. Nor, and Denni Kurniawan Total Quality Management with Safety Conformity: Shaping of Working Environment by Use of the ISO 45001 Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Adam Górny First Principle Calculation and Data Analysis of Anisotropy in Elastic Properties of Cubic Carbides TiC, VC and NbC . . . . . . . . . . 71 C. Tang, J. Guo, B. Li, O. Kostenevych, L. Wang, G. Rothwell, and J. Ren Grinding of Titanium Alloys (Ti-6Al-4V) Using Vibration Assisted Machining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Elsiddig Eldaw Ibrahim, Heisum Ewad, Xun Chen, and Andre D. L. Batako xv
xvi Contents Simulation of Bacterial Motion Under Flow Inside Micro Channel Using CFD and DPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 S. W. M. A. I. Senevirathne, J. Hasan, A. Mathew, M. Woodruff, and P. K. D. V. Yarlagadda Influence of Structural Parameters on the Wear Resistance of ADI During Dry Sliding Friction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 N. Khidasheli, G. Gordeziani, S. Gvazava, G. Tavadze, R. Tabidze and A. D. L. Batako Prioritization of Drivers for Lean and Green Manufacturing Using Fuzzy Analytic Hierarchy Process (FAHP) Approach . . . . . . . . . . . . . . 117 Sarita Prasad, Neelakanteswara A. Rao, Krishnanand Lanka, and Vijaya Kumar Manupati Influence of the Nanostructure Parameters of Wear-Resistant Coatings on the Properties of Carbide Tools . . . . . . . . . . . . . . . . . . . . . 135 Alexey Vereschaka, Marina Volosova, Nikolay Sitnikov, Filipp Milovich, Nikolay Andreev, Jury Bublikov, and Catherine Sotova Critical Reflections on 25 Years of Using Prefabrication and Modularisation in UK Construction . . . . . . . . . . . . . . . . . . . . . . . . 145 Neil Pickavance A Fuzzy Logic Base for Selecting Optimal Clearance of Die-Cutting Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Arkarapon Sontamino and Chiwapon Nitnara Hydrophobic Coating of Plywood Using Natural Oils and Waxes . . . . . 169 Ronald Wu Chong Mook, Seri Rahayu Ya’akub, Fethma M. Nor, and Denni Kurniawan ANN-FPA Based Modelling and Optimization of Drilling Burrs Using RSM and GA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 Nripen Mondal, Sudip Mandal, Madhab Chandra Mandal, Santanu Das, and Barun Haldar Mechanical and Physical Properties of Kapok Tree Sawdust Particleboard Manufactured with Three Ecologic Binders . . . . . . . . . . . 196 Soviwadan Drovou, Ayaréma Afio, Kodjo Attipou, Komlan Assogba Kassegne, Antonio Pizzi, and Komlan Sanda Vibration-Assisted Grinding of Mild and Hardened Steel: Effect on Power Consumption and Material Removal Rates . . . . . . . . . 215 Vaios Tsiakoumis Sustainable Flexible Job Shop Scheduling: A Systematic Literature Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Jatoth Mohan, Krishnanand Lanka, Neelakanteswara A. Rao, and Vijaya Kumar Manupati
Contents xvii Aircraft Brake Pad Reconstruction and Fabrication . . . . . . . . . . . . . . . 247 P. Jeyapandiarajan, P. Aswath, and M. Anthony Xavior Robotic Grinding for Surface Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Mohammed Sufian and Xun Chen Neuro Fuzzy Based Runner Selection for Plastic Injection Moulding Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Chiwapon Nitnara and Suthep Butdee Improving the Efficiency of Mechatronic Systems for a Rapid Adoption and Integration of Industry 4.0 . . . . . . . . . . . . . . . . . . . . . . . . 288 Raul Turmanidze, Giorgi Popkhadze, and Andre D. L. Batako Asymmetry in the Tension and Compression Flow Stress and the Effect of Sub-cell Size on the Hardness of a Selective Laser Melt 316L Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 Mustafa Güden, Samed Enser, Burcu Arslan Hamat, Alptuğ Tanrıkulu, and Hakan Yavaş Investigation of the Risk Factors Causing Safety and Delay Issues in Oil and Gas Pipeline Construction Projects . . . . . . . . . . . . . . . . . . . . 313 Raj Shah, Layth Kraidi, Wilfred Matipa, and Fiona Borthwick Why and How to Educate Selected Industry 4.0 Stakeholders in Technical and Non-technical Issues . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Jan Kazmierczak Evaluation of the Effectiveness of Standard Scheduling Rules – An Educational Approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344 Ryszard Perłowski, Arkadiusz Gola, and Katarzyna Antosz Efficiency Analysis of Hybrid Forecasting Models Supporting Manufacturing Companies in Production Planning, Maintenance and Quality Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Maria Rosienkiewicz Design and Development of a Dual Flow System for Fluid Delivery in Grinding Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 370 V. K. Tipparthi, D. Novovic, X. Chen, and A. D. L. Batako Influence of Nano-particles on the Properties of Recycled Plastics . . . . . 381 K. Han Sheng, Ezutah Udoncy Olugu, Cik Suhana Binti Hassan, V. Karunamoothei, and Kah Hou Teng Hygroscopic Performance of Sulphate-Based MgO Construction Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Ayodele Olofinjana, Nicholas Jays, David Young, Jitendra Mata, and Rezwanul Haque
xviii Contents Energy-Saving of Conveyor Belts in the Strategy and Reporting of Corporate Social Responsibility Initiatives of Producers . . . . . . . . . . 402 Mirosław Bajda, Leszek Jurdziak, Katarzyna Pactwa, and Justyna Woźniak Improvement of the Properties of Polymer Composites by Mineral Basalt Modified with Tetraethoxysilane . . . . . . . . . . . . . . . . . . . . . . . . . 415 J. Aneli, L. Shamanuri, and N. Bakradze Influence Parameters the Surface Roughness of JIS SCMS420 Stainless Steel on Lapping Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423 Somkiat Thermsuk, Suwit Thammasang, Danai Sonsuphap, and Thanapol Sombat Knowledge Management as a Sustainable Development Supporting Method in Manufacturing Organizations – A Systematic Literature Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Łuksz Szczekala and Dorota Stadnicka Productivity Gain by Combination of Lean Manufacturing and Mass Customisation Methods in Aviation Industry . . . . . . . . . . . . . 460 Govardhana Rao Banna, Teik-Cheng Lim, and Kotireddy Rama Bhupal Reddy Analysis of Platforms Supporting Open Innovation Approach . . . . . . . . 475 Mariusz Cholewa, Mateusz Molasy, Maria Rosienkiewicz, and Joanna Helman Smart Manufacturing Platform Estimation for SME in Automotive Rubber Part Supply Chain Management . . . . . . . . . . . . . . . . . . . . . . . . 491 Suthep Butdee Allocation of Human Resources in Sustainable Production Context . . . . 505 Agnieszka Tychoniuk and Ryszard Wyczółkowski The Complexity of Data-Driven in Engineer-To-Order Enterprise Supply-Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 517 Richard Addo-Tenkorang, Petri Helo, Ari Sivula, and Norman Gwangwava Human-Centred Approach in Industry 4.0: Lighting Comfort in the Workplace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533 Kanisius Karyono, Badr M. Abdullah, Alison J. Cotgrave, Ana Bras, and Jeff Cullen Advanced Risk Model for the Safety Evaluation of Food Transport Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 547 Rasheed Onakoya, Zhuohua Qu, Zaili Yang, and Ai Ha Thi Nguyen
Contents xix Advanced Bayesian Model to Quantify the Adequacy of Organization for Human Reliability: A Maritime Case . . . . . . . . . . . . . . . . . . . . . . . . 560 Zhuohua Qu, Khalifa Mohamed Abujaafar, Jin Wang, Salman Nazir, Steven C. Mallam, Eduardo Blanco-Davis, Fangbin Guo, Hazel Sivori, Stephen Symes, and Zaili Yang Fabrication and Applications of Antibacterial Surfaces and Nano Biosensing Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 577 Alka Jaggessar, Jafar Hasan, and Prasad K. D. V. Yarlagadda Flexible Manufacturing System with Uncertainty Management Using Fuzzy Logic for Machine Shop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 589 Suthep Butdee and Siridech Kunhirunbawon Adaptation of Methods to Improve the Efficiency of Business Processes Using the BPRPM Method * as a Chance to Gain a Competitive Advantage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 601 Filip Nowak and Piotr Biernacki Intelligent Modelling of Exploitation Systems of Machines and Devices – A Review of Concepts and Methods . . . . . . . . . . . . . . . . 614 Marian Brzezinski, Stanislaw Legutko, and Hubert Kędziora Development of New Vitrified Bond for Diamond Grinding of Polycrystalline Diamond Compacts . . . . . . . . . . . . . . . . . . . . . . . . . . 624 Xiao-Fu Zhang, An-Xian Lu, Yu Wang, and Andre D. L. Batako Flame Intensity Analysis for Hot Molten Metal Pouring in the Steel Industry by Applying Image Segmentation . . . . . . . . . . . . . . . . . . . . . . 632 Ivan Popov and Grazia Todeschini Intelligent Implant System for Bone Lengthening . . . . . . . . . . . . . . . . . 647 Joachim Strittmatter, Nikolas Hör, and Lazar Bošković Risk Assessment of a Production System with Series-Parallel Reliability Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 656 A. Burduk A Manufacturing Cost Estimation by Utilizing a Novel Sensor Based Cost Model in a Knowledge Management System . . . . . . . . . . . . 667 Hande Tokucoglu, Xun Chen, Abdennour El Rhalibi, and Tahsin T. Opoz High-Tech Enterprise Value Evaluation Based on Real Options . . . . . . 683 GuangLei Xu and HongBing Jiang The Enterprise Organization Reform Under the Industrial Internet Situation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 690 Lin Zhang, Shuaijie Shi, and Jinfa Li
xx Contents The Significance of Coordinated Research Against SARS-CoV-2 . . . . . . 698 Jafar Hasan, Amar Velic, Alka Jaggessar, Asha Mathew, Tejasri Yarlagadda, Kirsten Spann, Seeram Ramakrishna, and Prasad K. D. V. Yarlagadda Operations Management Processes in the Continuous Production of Renewable Energy: The Basic Social Process of Proficient Amalgamating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 714 Jan Green and Alison Mcmillan A Review of Satisfaction Theories and Implications for STEM Teaching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 729 Janani Ganapathi, Jyoti Sharma, and Prasad K. D. V. Yarlagadda Industry 4.0 Mapping Strategic Decision Making for Seaport Operations Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 743 Scott Caldwell and Rob Darlington Women in Engineering: Myths, Measures and Policies . . . . . . . . . . . . . 757 Jyoti Sharma and Prasad K. D. V. Yarlagadda Author Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 767
You can also read