G 2500 DCE Manual not for use in USA and Canada!
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
®
Manual not for use
in USA and Canada! G 2500 DCE
R
e
w gis
w
w te
.k r
a
er a nd
ch
er w
.c
o in 8.752-796.0 05/12
m !HIGH PRESSURE WASHER OPERATOR MANUAL
Dear Customer, Proper Use
Please read and comply with these This high-pressure cleaner is designed for domes-
original instructions prior to the initial tic use only:
operation of your appliance and store them for later
– to clean machines, vehicles, buildings, tools,
use or subsequent owners.
facades, terraces, garden equipment etc. using a
high-pressure water jet (and detergents if required).
Model Overview 4 – with accessories, replacement parts and de-
Important Safety Instructions 5 tergents approved by KÄRCHER. Observe the
Assembly Instructions 6 instructions provided with these detergents.
Operating Instructions 8
Environmental protection
Using the Accessories 10
Working With Detergents 10 The packaging material can be recycled.
Taking a Break 11 Please do not place the packaging into the
ordinary refuse for disposal, but arrange for the
Shutting Down & Clean-Up 11
proper recycling.
Long Term Storage 12
Old appliances contain valuable materials
Maintenance Instructions 12
that can be recycled. Please arrange for the
Cleaning Tips 12 proper recycling of old appliances. Please
Troubleshooting 14 dispose your old appliances using appropriate
collection systems.
Specifications Notes about the ingredients (REACH)
You will find current information about the ingre-
G 2500 DCE AUS dients at:
Operating Pressure 2500 PSI http://www.karcher.de/de/unternehmen/
Water Volume 9.1 L/Min umweltschutz/REACH.htm
Detergent Suction 0.57 - 0.76 L/Min
Gasoline Engine
Engine
173 cc
Part No. 1.107-213.0
Serial No.
2 EnglishHIGH PRESSURE WASHER OPERATOR MANUAL
Safety Alert Symbols Symbols on the machine
DANGER The high pressure jet may not be
directed at persons, animals, live
Indicates “an imminently hazardous situation
which, if not avoided, will result in death or seri- electrical equipment or at the ap-
ous injury.” pliance itself. Protect the appliance
against frost.
WARNING
Indicates “a potentially hazardous situation which, Risk of burns on account of hot surfaces!
if not avoided, could result in death or injury.”
CAUTION
Risk of poisoning! Do not breathe in the
Indicates “a potentially hazardous situation which, if exhaust fumes.
not avoided, may result in minor or moderate injury
or in property damage incidents.”
Owner/User Responsibility Kärcher Customer Support
The owner and/or user must have an understand- Australia
ing of the manufacturer’s operating instructions Call: 1 800 675 714 for help or visit our website:
and warnings before using this pressure washer.
www.karcher.com.au
Warning information should be emphasized and
understood. If the operator is not fluent in English, Please take a moment to register your pressure
the manufacturer’s instructions and warnings shall washer online at:
be read to and discussed with the operator in the www.karcher.com.au
operator’s native language by the purchaser/owner,
making sure that the operator comprehends its con-
tents. Owner and/or user must study and maintain Kärcher Customer Support
for future reference the manufacturer’s instructions. New Zealand
Call: 0800 5272437 for help or visit our website:
www.karcher.co.nz
English 3MODEL OVERVIEW
4
1
7
2
12
11
3
10
5 8
13
6
9
1. Handle 8. Water Inlet With Garden Hose Connector
2. Trigger Gun 9. Quick Connect High Pressure Outlet
3. Trigger Gun Safety Lock 10. Detergent Suction Tube With Filter
4. High Pressure Hose 11. Dipstick
5. Gas Tank 12. Quick Connect Nozzles
6. Spray Wand 13. Garden Hose Adapter
7. Nozzle Holder For Engine Details See Engine Manual
4 EnglishIMPORTANT SAFETY INSTRUCTIONS
■ Read the operating instructions of the engine ■ Do not use acids, solvents, or any flammable
manufacturer before start-up and follow the or alkaline material in this product. These
safety instructions carefully. products can cause physical injuries to the
WARNING operator and irreversible damage to the ma-
chine.
When using this product, basic precautions should
WARNING
always be followed, including the following:
Gun Kicks Back – Hold with both hands.
■ Read all instructions before using product.
■ The Trigger Gun Safety Lock prevents the
■ To reduce the risk of injury, close supervision
trigger from accidentally being engaged. This
is necessary when a product is used near
safety feature must be engaged when replac-
children.
ing nozzles or not in use.
■ Know how to stop the product and bleed pres-
WARNING
sures quickly. Be thoroughly familiar with the
controls. The engine exhaust from this product contains
chemicals known to the State of California to
■ Stay alert – watch what you are doing.
cause cancer, birth defects or other reproduc-
■ Do not operate when fatigued or under the tive harm. Operation of this equipment may
influence of alcohol or drugs. create sparks that can start fires around dry
■ Keep operating area clear of all persons. vegetation. A spark arrestor may be required.
Operator should contact local fire agencies for
■ Do not overreach or stand on unstable sup-
laws or regulations.
port. Keep good footing and balance at all
times. CAUTION
■ Wear safety goggles and ear protection. Risk of Asphyxiation – Use this product only
in a well ventilated area.
■ Follow the maintenance instructions specified
in the manual. ■ Operate and fuel machine in a well ventilated
area, free of devices featuring an open pilot
■ To avoid risks, all repairs and replacement
or flame such as boilers, water heaters, etc.
of spare parts should only be carried out by
CAUTION
trained personnel.
Risk of Fire – Do not add fuel when the prod-
WARNING
uct is operating or still hot.
Risk of Injection or Injury – Do Not Direct
CAUTION
Discharge Stream At Persons.
Risk of fire - Do not put container with flam-
■ High pressure jets can be dan-
mables products into the nozzle holder.
gerous if misused. The jet must
not be directed at persons, ■ Do not operate if fuel has been spilled. In-
stead, move machine to different location and
animals, electrical devices, or
avoid creating sparks.
the unit itself.
■ This machine has hot surfaces which can
DANGER
cause burns. Operate in a safe environment
Do not spray electrical connections, electrical and away from children.
outlets or fixtures.
■ Do not touch hot surfaces or allow accessories
WARNING to contact hot surfaces.
Risk Of Explosion –Do not spray flammable ■ Do not leave machine running unattended.
liquids. Operate only where open flame or
■ Avoid tipping machine on its side.
torch is permitted.
SAVE THESE INSTRUCTIONS
English 5WATER SUPPLY (Cold Water Only)
CAUTION ■ Flow rate of water supply must not fall below
When connecting to water supply 9.5 L/Min.
mains, local regulations of your ■ Flow rate can be determined by running the
municipal water company must water for one minute into an empty 19 L con-
be observed. In some areas con- tainer.
necting directly to public drinking water supply ■ The water supply temperature must not ex-
may require a backflow prevention device. ceed 104°F/40°C.
This is to ensure that there is no feedback
■ Never use the pressure washer to draw in
of chemicals into the water supply. Use a
water contaminated with solvents, e.g. paint
suitable system separator manufactured by
thinners, gasoline, oil, etc.
KÄRCHER; or, as an alternative, a system
separator as per EN 12729 Type BA. Water ■ Always prevent debris from being drawn into
flowing through a system separator is consid- the unit by using a clean water source. Use
ered non-drinkable. additional water filter.
■ Garden hose must be at least 16 mm ■ Do not operate pressure washer without the
diameter. water turned on.
ASSEMBLY INSTRUCTIONS
Hardware (included)
Description Purpose Illustration Qty
A Knob 6 mm Joint Assembly 2
(1/4")
B Bolt 6 mm Joint Assembly 2
(1/4")
C Nylon Rivet Gun Holder Assembly 4
D Gun Holder Gun Holder Assembly 1
E Nozzle Holder Nozzle Holder Assembly 1
6 EnglishHardware (included)
Description Purpose Illustration Qty
F High Pressure Spray Gun Assembly 1
Hose
G Spray Gun Spray Gun Assembly 1
H Quick Nozzle Kit Assembly 1
Connect
Nozzle
Kit (4 pc.)
I Wand Wand Assembly 1
Assembling
STEP 1: STEP 3:
Attach the handle to the frame of the pres- Snap the nozzle holder (E) on to pressure
sure washer. Align holes, insert bolts (B), and washer handle and slide it down to the gun
tighten with knobs (A). holder (D).
E
B
A
D
STEP 2: STEP 4:
Mount the gun holder (D) with enclosed nylon Place the quick connect nozzles (H) in the
rivets (C) to the pressure washer handle. nozzle holder (E) following the color instruc-
tion.
C H
E
D
English 7Assembling
STEP 5: STEP 6:
Attach the wand to the spray gun. Vertically insert the Spray Gun (G) into the
Push the wand (I) into the trigger gun (G) and Gun Holder (D).
then thread the connection until tight.
G
G
D
I
OPERATING INSTRUCTIONS
STEP 1: STEP 2:
Pull the spring-loaded collar of the wand Pull back the spring loaded collar at the spray
back to insert your choice of quick connect gun and insert the high pressure hose.
nozzle.
Release the collar and push the nozzle until
the collar clicks.
Release the collar and push the nozzle until
the collar clicks.
CAUTION
High pressure in quick connect area.
CAUTION Risk of injury caused by improperly locked
High pressure in nozzle area. high pressure hose.
Risk of injury caused by improperly locked ■ Make sure you hear a "click" when inserting
the high pressure hose into the quick connec-
nozzle.
tion.
■ Make sure you hear a "click" when inserting
■ Pull the high pressure hose to make sure it is
the nozzle tip into the wand.
seated properly before operating your unit.
■ Pull the nozzle to make sure it is seated
properly before operating your unit.
8 EnglishOPERATING INSTRUCTIONS
CAUTION CAUTION
Engine shipped without oil. Before starting High pressure in quick connect area.
engine, fill with oil. Do not over-fill. Do not run
Risk of injury caused by improperly locked
the engine with a high or low oil level as this
high pressure hose.
can cause engine damage.
■ Make sure you hear the "click" when inserting
If you have further questions regarding the
the high pressure hose into the quick connec-
engine, please refer to the engine manual
tion.
included with the unit.
■ Pull the high pressure hose to make sure it is
STEP 3: seated properly before operating your unit.
Check oil level. Oil level should always be STEP 6:
between the "FULL" and "ADD" or "MAX" and
Connect garden hose to unit`s water inlet.
"MIN" marks on the dipstick as shown in the
picture below.
FULL / MAX
ADD / MIN
STEP 7:
Be sure the machine is level when checking
the oil level. (Refer to the engine’s operating Connect garden hose to the cold water source
manual for seasonal grades). and turn water completely on.
We recommend that the oil be changed after Do not use hot water.
the first 5 hours of use, then once every 50 STEP 8:
hours.
Unlock the trigger gun safety lock. Trigger the
STEP 4: gun to eliminate trapped air, wait for a steady
Fill gas tank with unleaded gasoline. flow of water to emerge from the spray nozzle.
Do not use leaded gasoline. STEP 9:
Do not add oil to the gasoline. Open fuel valve. Pull the choke rod to the ON
position (on a warm engine, leave the choke
STEP 5:
rod in the OFF position).
Pull back the spring loaded collar at the high
pressure outlet and insert the high pressure
hose.
STEP 10:
Move the engine stop switch to the ON posi-
tion.
Release the collar and push the high pressure
hose until the collar clicks.
English 9OPERATING INSTRUCTIONS
STEP 11: After the engine warms up enough to run
Pull the starter handle. If the engine fails to smoothly, move choke rod to OFF position.
start after 3 pulls, squeeze the trigger gun to
release pressure, and repeat step.
For engine details see engine manual.
USING THE ACCESSORIES
Quick connect nozzles 65° spray angle = Black nozzle
The color-coded quick connect nozzles provide a For operating with detergents or cleaning with
wide array of spray widths from 0° to 65° and are low pressure.
easily accessible when placed in the convenient
nozzle holder.
0° spray angle = Red nozzle
For particularly stubborn accumulation of grime.
Not recommended for soft materials like sidings,
decks, painted surfaces, cars. CAUTION
High pressure in nozzle area. Risk of injury
caused by improperly locked nozzle.
25° spray angle = Green nozzle ■ Make sure you hear the "click" when inserting
For dirt accumulation over a large surface. the nozzle tip into the quick connection.
■ Pull the nozzle to make sure it is seated
properly before operating your unit. (See
OPERATING INSTRUCTIONS: Step 1)
40° spray angle = White nozzle WARNING
For moderate dirt accumulation over a large To avoid serious injury never point spray
surface. nozzle at yourself, other persons or animals.
WORKING WITH DETERGENTS
STEP 2:
Detergents can only be applied with the black
detergent nozzle. Fill a container with Kärcher detergent. Place
the filter end of detergent suction tube into the
STEP 1:
container.
Install the black detergent nozzle for deter-
gent application at low pressure.
10 EnglishWORKING WITH DETERGENTS
STEP 3: STEP 4:
With the engine running, pull trigger to operate Always draw fresh water through the deter-
unit. gent suction tube when the cleaning job is
Liquid detergent is drawn into the unit and done, to rinse/flush any remaining detergents
mixed with water. from the injection system.
Apply detergent to work area. For best results see Cleaning Tips for specific
Do not allow detergent to dry on surface. information on how to clean different surfaces.
Detergents
CAUTION CAUTION
This unit has been designed for use with cleaning Never use:
detergents recommended by the manufacturer.
– Bleach, chlorine products or other corrosive
The use of other cleaning detergent may affect the chemicals
operation of the machine and void the warranty.
– Liquids containing solvents (i.e., paint thin-
Always Use Kärcher Detergent for Best Results
ners, gasoline, oils.)
Kärcher biodegradable detergents are specially
– Tri-sodium phosphate products
formulated to protect the environment and your
pressure washer. The special formula won`t clog – Ammonia products
the suction tube filter and will protect the internal – Acid-based products
parts of the pressure washer for a longer life. For
These chemicals will harm the unit and will damage
Kärcher Detergents, check your retailer or visit
our website: the surface being cleaned.
www.karcher.com.au Use of these items will void the warranty.
www.karcher.co.nz
TAKING A BREAK ...five minutes or more
STEP 1: STEP 2:
Move the engine stop switch to the OFF position. Release trigger and engage safety lock.
For engine details see engine manual.
SHUTTING DOWN & CLEAN-UP
STEP 1: STEP 5:
If detergents have been used, remove deter- Release trigger and engage gun safety lock.
gent suction tube from container and insert
into 3.78 liters of fresh water.
Siphon water at low pressure for one minute
to clear the line of residual detergent.
STEP 2:
Move the engine stop switch to the OFF posi-
tion. Close the fuel valve. STEP 6:
STEP 3: Disconnect the garden hose from the water
Turn off the water source. inlet on the unit.
STEP 4: STEP 7:
Press trigger to release water pressure. Disconnect the high pressure hose from the
high pressure outlet. Store the high pressure
hose in the nozzle holder assembly.
English 11LONG TERM STORAGE
1: Disconnect all water connections. CAUTION
2: Turn on the machine for a few seconds, until Failure to follow the above directions will
the water which had remained in the pump result in damage to the pump assembly and
exits, turn off immediately. accessories and will void the warranty.
3: Do not allow high pressure hose to become It is highly recommended to use Kärcher's
kinked. Pump Guard (part number 9.558-998.0) be-
4: Store the machine and accessories in a fore winter storage and during the cleaning
room which does not reach freezing tem- season to protect the pump from freezing and
peratures. DO NOT store near furnace or premature wear.
other sources of heat as it may dry the pump
seals.
MAINTENANCE INSTRUCTIONS
Kärcher pump Pump Maintenance
Initial Use The pump on your Kärcher pressure washer does
not require maintenance. Any attempts to service
All Kärcher pumps ship with oil already inside direct
or alter the pump may damage your pressure
from the factory. There is no need to add oil.
washer and void your product warranty.
Pump Inspection
Engine
You should routinely make a visual inspection of
Carry out maintenance tasks for the engine accord-
the pressure washer’s pump. If you notice oil leak-
ing to the specifications provided in the operating
ing around the pump seals, you should take the
instructions provided by engine manufacturer.
pressure washer to a Kärcher-Authorised Service
Centre for repair. (You can locate a service centre
in your area online at: www.karcher.com.au &
www.karcher.co.nz).
CLEANING TIPS
Deck Cleaning House Siding
(with or without detergent). Pre-rinse deck and (with or without detergent). Pre-rinse cleaning
surrounding area with fresh water. If using Kärcher surface with fresh water. If using Kärcher Pressure
Deck Wash, apply to surface at low pressure. For Wash, apply to surface at low pressure (for best
best results, limit your work area to smaller sec- results, limit your work area to sections of ap-
tions of approximately 2.3 square meters. Allow proximately 1.9 meters and always apply detergent
Deck Wash to remain on surface 1-3 minutes. Do from bottom to top). Allow detergent to remain on
not allow detergent to dry on surface. Rinse at high surface 1-3 minutes. Do not allow detergent to dry
pressure in a long sweeping motion keeping the on surface, if surface appears to be drying, simply
spray nozzle approximately 8 - 15 cm from the wet down surface with fresh water. If needed, use
cleaning surface. Always clean from top to bottom special wash brush attachment (not included) to
and from left to right. When moving on to a new remove stubborn dirt. Rinse at high pressure from
section of the cleaning surface, be sure to overlap top to bottom in an even sweeping motion keeping
the previous section to eliminate stop marks and the spray nozzle approximately 15 cm from the
ensure a more even cleaning result. cleaning surface.
12 EnglishCLEANING TIPS
Cement Patios, Brick and Stone Patio & Lawn Furniture
(with or without detergent). Pre-rinse cleaning (with or without detergent). Pre-rinse furniture
surface with fresh water. If using Kärcher Pres- and surrounding area with fresh water. If using
sure Wash or Degreaser, apply to surface at low Pressure Wash, apply to surface at low pressure.
pressure. For best results, limit your work area to Allow Pressure Wash to remain on surface 1-3
smaller sections of approximately 2.3 square me- minutes. Do not allow detergent to dry on surface.
ters. Allow Pressure Wash or Degreaser to remain If needed use special Wash Brush Attachment (not
on surface 1-3 minutes. Do not allow detergent to included) to remove stubborn dirt. Rinse at high
dry on surface. Rinse at high pressure in a sweep- pressure in a sweeping motion keeping the spray
ing motion keeping the spray nozzle approximately nozzle approximately 8 - 15 cm from the cleaning
8 - 15 cm inches from the cleaning surface. Always surface. For best results, clean from top to bottom
clean from top to bottom and from left to right. For and from left to right.
removing extremely stubborn stains, use a Dirt- Recommendations
Blaster® Spray Nozzle (sold separately).
■ Before cleaning any surface an inconspicuous
Cars, Boats & Motorcycles area should be cleaned to test spray pattern
(with or without detergent). Pre-rinse vehicle and distance for maximum cleaning results.
with fresh water. If using Kärcher Vehicle Wash, ■ If painted surfaces are peeling or chipping,
apply to surface at low pressure. For best results, use extreme caution as pressure washer may
clean one side of vehicle at a time and always remove the loose paint from the surface.
apply detergent from bottom to top, do not allow
■ When using on surfaces which might come in
detergent to dry on surface. If needed, use special
contact with food, flush surfaces with plenty
wash brush attachment (not included) to remove
of drinking water.
stubborn dirt. Rinse at high pressure in a sweeping
■ For additional cleaning tips, visit our website at
motion keeping the spray nozzle approximately 15
www.karcher.com.au or www.karcher.co.nz
- 20 cm from the cleaning surface (distance should
increase when rinsing pin-striping or other sensitive
Optional Accessories
surfaces). Always clean from top to bottom and
Optional accessories are available to further
from left to right. For best results, wipe surface dry
enhance your cleaning capabilities. These acces-
with a chamois or soft dry cloth.
sories are accurate as of the printing date of this
Barbecue Grills, Outdoor Power manual. Please check our website:
Equipment & Gardening Tools www.karcher.com.au & www.karcher.co.nz for
up-to-date information.
(with or without detergent). Pre-rinse cleaning
– Extension Hose
surface with fresh water. If using Kärcher Pressure
Wash or Degreaser, apply detergent at low pres- – DirtBlaster® Spray Nozzle
sure. Allow Pressure Wash to remain on surface – Universal Wash Brush Kit
1-3 minutes. Do not allow detergent to dry on
– T350 Deck and Driveway Cleaner
surface. Rinse at high pressure keeping the spray
nozzle approximately 8 - 15 cm from the cleaning
surface. For removing extremely stubborn dirt, it
may be necessary to move the spray nozzle even
closer to the surface for greater dirt cutting action.
English 13TROUBLESHOOTING
CAUTION
Remove the spark plug cable to prevent accidental
ignition of the engine before making any repair.
Symptom Cause Solution
ENGINE WILL NOT No gasoline Fill gas tank
START Choke is not in the correct Slide choke lever out to closed position
position
Water pressure built up in Squeeze the trigger to release the pressure
the machine
For additional engine problems refer to the engine manual.
UNIT DOES NOT Diameter of garden hose is Replace with a 16mm diameter hose or larger
REACH HIGH too small garden hose
PRESSURE Water supply is restricted Check garden hose for kinks, leaks and
blockage
Not enough inlet water Turn water on full force. Check garden hose
supply for kinks, leaks or blockage.
Water inlet filter is clogged Remove filter and rinse out in warm water
Black detergent nozzle is Remove black detergent nozzle and attach
attached high pressure nozzle
OUTPUT PRES- Not enough inlet water Turn water on full force. Check garden hose
SURE supply. for kinks, leaks or blockage
VARIES HIGH AND Pump is sucking air Check that hoses and fittings are air tight.
LOW Turn off machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through the nozzle
Water inlet filter is clogged Remove filter and rinse out in warm water
Spray nozzle is obstructed Blow out or remove debris with a fine needle
Calcified gun, hose or Run distilled vinegar through detergent
spray wand suction tube.
14 EnglishSymptom Cause Solution
NO DETERGENT Detergent suction tube not Check connection
properly
connected to the machine
Detergent is too thick Dilute detergent, for best results use Kärcher
detergent
Filter on detergent suction Run warm water through filter to remove
tube is clogged debris
Damaged or clogged deter- Remove obstruction or replace detergent
gent suction tube suction tube
A high pressure nozzle is Replace with black detergent nozzle
attached
Spray nozzle is obstructed Blow out or remove debris with fine needle
GARDEN HOSE Loose fittings Tighten fittings
CONNECTION
Missing/worn rubber Insert new washer
LEAKS
washer
SPRAY WAND Spray wand not properly Turn the swivel nut of the gun clockwise until
LEAKS attached connection is tight
Broken o-ring or plastic Visit www.karcher-help.com or locate a
insert service centre at www.karcher.com.au
or www.karcher.co.nz
PUMP IS NOISY Not enough gas or engine Check that hoses and fittings are air tight.
oil Turn off machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through the nozzle
WATER LEAKS Loose fittings Check quick connect fittings
FROM PUMP (UP
TO 10 DROP PER Visit www.karcher-help.com or locate a
Water seals are damaged
service centre at www.karcher.com.au
MINUTE IS PER- or worn.
or www.karcher.co.nz
MISSIBLE)
Thermal protection device Thermal protection device will auto reset.
is activated. Do not run pump for more than 5 minutes
without spraying
OIL DRIP Oil seals are damaged or Visit www.karcher-help.com or locate a
worn service centre at www.karcher.com.au
or www.karcher.co.nz
If the symptom you are experiencing is not listed
above, or if the provided solutions do not solve your
issue, please visit our extensive online trouble-
shooting database at:
www.karcher.com.au or www.karcher.co.nz
English 15A FIN N SGP
Alfred Kärcher Ges.m.b.H. Kärcher OY Kärcher AS Karcher Asia Paci¿c Pte. Ltd.
Lichtblaustraße 7 Yrittäjäntie 17 Stanseveien 31 5 Toh Guan Road East
1220 Wien 01800 Klaukkala 0976 Oslo #01-00 Freight Links
☎ (01) 250 600 ☎ 0207 413 600 ☎ 24 17 77 00 Express Distripark
Singapore 608831
AUS GB NL ☎ 6897-1811
Kärcher Pty. Ltd. Kärcher(UK) Limited Kärcher BV
40 Koornang Road Kärcher House Postbus 474 SK
Scoresby VIC 3179 Beaumont Road 4870 AL Etten-Leur Kärcher Slovakia, s.r.o.
☎ (03) 9765 - 2300 Banbury ☎ 0900-33 444 33 Beniakova 2
Oxon, OX16 1TB 94901 Nitra
B / LUX ☎ 01295 752 200 NZ ☎ 037 6555 798
Kärcher N.V. Karcher Limited
Industrieweg 12 GR 12 Ron Driver Place TR
2320 Hoogstraten Kärcher Cleaning Systems A.E. East Tamaki, Auckland Kärcher Servis Ticaret A.S.
☎ B: 0900 10027 31-33, Nikitara str. & ☎ (09) 274-4603 9 Eylül Mahallesi
LUX: 0032 900 10027 Konstantinoupoleos str. 307 Sokak No. 6
13671 Acharnes P Gaziemir / Izmir
BR ☎ 210 - 2316 153 Neoparts - Com. e ☎ (0232) 252-0708
Kärcher Indústria e Comércio Ltda. Ind. Automóvel, S.A.
Av. Prof. Benedicto Montenegro 419 H Av. Infante D. Henrique, Lote 35 TWN
CEP 13.140-000 - Paulínia - SP Kärcher Hungária Kft 1800-218 Lisboa Karcher Limited
☎ 0800 176 111 Tormásrét ut 2. ☎ 21 8558300 5F/6. No.7
2051 Biatorbágy Wu-Chuan 1st Rd
☎ (023) 530 640 PL Wu-Ku Industrial Zone
CDN
Kärcher Canada Inc. Kärcher Sp. z o.o. Taipei County
6975 Creditview Road Unit #2 HK Ul. Stawowa 140 ☎ (02) 2299-9626
Mississauga, Ontario L5N 8E9 Kärcher Limited 31-346 Kraków
☎ 1-800-465-4980 Unit 10, 17/F. ☎ (012) 6397-222
APEC Plaza UA
49 Hoi Yuen Road PRC Kärcher Ukraine
CH Kwun Tong, Kowloon Kärcher Cleaning Systems Kilzeva doroga, 9
Kärcher AG ☎ (02) 357-5863 Co., Ltd. 03191, Kyiv
Industriestraße 16 Part B, Building 30, ☎ (044) 594 75 75
8108 Dällikon No. 390 Ai Du Road
☎ 0844 850 863 I
Kärcher S.p.A. Shanghai Waigaoquiao 200131
UAE
Via A.Vespucci 19 ☎ (021) 5046-3579
Karcher FZE
CZ 21013 Gallarate (VA)
RO Jebel Ali Free Zone
Kärcher spol s r.o. ☎ 848 - 99 88 77 RA 8, XB 1, Jebel Ali, Dubai
Modletice þ.p. 141 Karcher Romania s.r.l.
☎ (04) 8836-776
251 01 ěíþany u Prahy Sos. Odaii Nr. 439
IRL
☎ 0323 606 014 013606 Bucureúti
Karcher Limited ☎ 0372 709 001 USA
12 Willow Business Park
D Nangor Road Kärcher North America
RUS 750 W Hampden Ave.
Alfred Kärcher GmbH & Co. KG Clondalkin Dublin 12
Service-Center Gissigheim ☎ (01) 409 77 77 Suite 400
Im Gewerbegebiet 2 Englewood, CO 80110
97953 Königheim-Gissigheim ☎ 877-527-2437
☎ (07195) 903 2065 KOR ☎ +7 495 228 39 45
Karcher Co. Ltd. (South Korea) ZA
Youngjae B/D, 50-1, 51-1 S Kärcher (Pty.) Limited
DK Sansoo-dong, Mapo-ku
Kärcher AB 144 Kuschke Street
Kärcher Rengøringssystemer A/S Seoul 121-060
Tagenevägen 31 Meadowdale
Gejlhavegård 5 ☎ 032-465-8000 42502 Hisings-Kärra Edenvale 1614
6000 Kolding
☎ (031) 577-300 ☎ (011) 574-5360
☎ 70 206 667 MAL
Karcher Cleaning
E Systems Sdn. Bhd.
Kärcher S.A. No. 8, Jalan Serindit 2
Pol. Industrial Font del Radium Bandar Puchong Jaya
Calle Doctor Trueta 6-7 47100 Puchong, Selangor
08400 Granollers (Barcelona) ☎ (03) 5882 1148
☎ 902 170 068
MEX
F Karcher México, SA de CV
Kärcher S.A.S. Av. Gustavo Baz No. 29-C
5 Avenue des Coquelicots Col. Naucalpan Centro
Z.A. des Petits Carreaux Naucalpan, Edo. de México
94865 Bonneuil-sur-Marne C.P. 53000 México
☎ (01) 43 996 770 ☎ 01 800 024 13 13You can also read
