CUTTERS AND SPECIALITY KNIVES
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
CUTTERS AND SPECIALITY KNIVES
WELCOME TO THE WORLD OF
CUTTERS AND SPECIALITY KNIVES.
INTRODUCTION Page ACCESSORIES Page
A master of its craft. 2 BELT HOLSTER L, M, S 48
Cutters and speciality knives from MARTOR. HOLSTER LARGE 50
HOLSTER SMALL 50
SAFEBOX 51
ARGENTAX (CUTTERS) Page USED BLADE CONTAINER 51
ARGENTAX TAP-O-MATIC 6 WALL MOUNT BRACKET USED BLADE 51
ARGENTAX CUTTEX 9 MM 8 CONTAINER
ARGENTAX CUTTEX 18 MM 10 CUTTING MATS 52
ARGENTAX MULTIPOS 12
ARGENTAX FILIUS 14
ARGENTAX RAPID 16 APPENDIX Page
ARGENTAX MITRE CUTTER 18 Our additional service media 54
Our home page 55
Pictogram legend 56
Contact 58
GRAFIX (GRAPHIC CUTTERS) Page Imprint 59
GRAFIX BOY 22
GRAFIX 501 24
GRAFIX PICCOLO 26
GRAFIX SCALPEL SMALL 28
SCRAPEX (SCRAPERS) Page
SCRAPEX ARGENTAX 32
SCRAPEX 596 34
SCRAPEX CLEANY 36
TRIMMEX (DEBURRING CUTTERS) Page
TRIMMEX CUTTOGRAF 40
TRIMMEX SIMPLASTO 42
TRIMMEX CERACUT 44
The products in this catalogue are generally shown in original
size. The few exceptions are indicated on the product page.
A MASTER OF ITS CRAFT. FOR SPECIAL TASKS YOU NEED
CUTTERS AND SPECIALITY KNIVES FROM MARTOR. SPECIAL SOLUTIONS.
Quality made in Solingen. MARTOR-DNA in every tool. More than 18 speciality knives in a multitude Good advice.
MARTOR KG from Solingen in Germany is Our speciality knives, like our safety knives, are of versions. Our system of names is just one way of finding
the leading international manufacturer of a culmination of more than 75 years of experi- Manual cutting tasks are required in virtually what you need. But our mission is to provide
high-quality cutting solutions. Our GS-certified ence in knives and blades where no comprise every work and home situation. To meet your you with the MARTOR product that specifically
safety knives have been setting benchmarks is made on sharpness, reliability and durability, needs, MARTOR has more than 18 different matches your cutting requirements. This is the
for decades, and we have always set the same and where only the best plastic and metal ma- speciality knives, with a large range of blades difference between having a sharp knife and
quality standards for our range of special terials are used. Furthermore, we know exactly for different uses as well as practical accesso- having a knife that is optimal for your cutting
knives presented in this catalogue. the procedures and principles by which our cus- ries such as the new cutting mats. needs. Therefore, don‘t hesitate in contacting
tomers work and are therefore able to provide us. We can personally advise you on the prod-
Meeting your needs. cutting tools that are, so to speak, tailor-made One name for each product family. uct for your needs – by telephone, email or
Our speciality knives give you highly developed for the task. This is what makes MARTOR prod- To help you find what you need, each product we‘ll arrange to visit you.
cutting tools for a broad range of trades and ucts different. family has its own “first name“. For example,
applications. For cutting out, cutting off and if you come across a product beginning with
cutting up as well as for handicrafts, designing, ARGENTAX, you will know that it belongs to the
scraping or deburring – you will always get the family of standard cutters for universal applica-
result you need. tions. The GRAFIX family covers all scalpel-type
cutting tools. MARTOR‘s professional scrapers
begin with the name SCRAPEX, and deburrers
with TRIMMEX.
GRAPHIC CUTTERS
SCRAPEX
SCRAPERS
DEBURRING CUTTERS
ACCESSORIES
BELT HOLSTERS
ARGENTAX
CUTTERS
GRAFIX
TRIMMEX
2
ARGENTAX
Our ARGENTAX family contains above all those
cutting tools that you know as cutters: universal
knives for the most varied of cutting applications
and m
aterials with a handle made of plastic or
metal. In addition to this we have a wide range
of snap-off and non-segmented blades. You can
almost always regulate the cutting depth and
the blade retraction manually.
ARGENTAX TAP-O-MATIC PRODUCT FEATURES NO. 331.02
NO. 331.02 Application Technical features
Tough when using. Flexible to handle. With styropor blade.
A cutter for high demands? The ARGENTAX TAP-O-MATIC with
an 18 mm wide polystyrene blade fulfils this wish. A blade
extension of up to 83 mm makes the knife ideal not just for Main cutting materials
extra deep cutting tasks. The blade lock is also so robust that
it can resist cutting pressures of up to 18 kg. And you can also
adjust the blade extension to several different levels.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 153 x 20 x 37 mm
Weight 67.0 g
Weight per unit (single unit box) 76.0 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX TAP-O-MATIC STYROPOR BLADE NO. 79 NO. 79.60
with STYROPOR BLADE NO. 79 NO. 331.02 0.50 mm, 109.5 mm long, 10 in transparent pack
1 in single unit box (10 in multipack)
STYROPOR BLADE NO. 179 NO. 179.60
ARGENTAX TAP-O-MATIC 0.50 mm, 109.5 mm long, stainless,
with SNAP-OFF-BLADE NO. 77 NO. 332.02 10 in transparent pack
1 in single unit box (10 in multipack)
STYROPOR BLADE NO. 379 NO. 379.60
ARGENTAX TAP-O-MATIC
A robust tool Large selection Running to a narrow point The handle? Handy Practical eyelet with STYROPOR BLADE NO. 7940 NO. 330.02
0.50 mm, 109.5 mm long, serrated edge,
In the ARGENTAX TAP-O- Among 15 possible cutting The handle of the ARGEN- The ARGENTAX TAP-O- You don‘t have to do 10 in transparent pack
1 in single unit box (10 in multipack)
MATIC, the handle and depths, there must be a TAX TAP-O-MATIC tapers MATIC fits exactly into your without the eyelet in the SNAP-OFF-BLADE NO. 77 NO. 77.60
metal rail to guide the bla- suitable one for you. The off to the front. So you can hand. What‘s more: the ARGENTAX TAP-O-MATIC. 0.50 mm, 109.6 mm long, 10 in transparent pack
de form a very stable unit. not segmented polystyrene approach the cut in more grooves on the back incre- You can just pull a strap STYROPOR BLADE NO. 7940 NO. 7940.60
You can really feel it when blade, safe from breaking narrow areas too. ase the gripping capacity. through it and attach 0.50 mm, 71.2 mm long, 10 in transparent pack
you take it in your hand. off, is particularly suitable So there is no risk of your the cutter wherever you
STYROPOR BLADE NO. 17940 NO. 17940.60
And all the more when for work with a maximum hand slipping while cutting. need it.
0.50 mm, 71.2 mm long, stainless,
you start cutting. blade extension. 10 in transparent pack
6 7
ARGENTAX CUTTEX 9 MM PRODUCT FEATURES NO. 46102.08
NO. 46102.08 Application Technical features
Classic cutter. With a 9 mm polystyrene blade.
Main cutting materials
Sharp, small, handy – the ARGENTAX CUTTEX 9 MM with a
narrow polystyrene blade has all the possible properties you
would expect from a cutter. Ideal for easy cutting of card-
board boxes, cardboard, paper and adhesive tape. You can
grip the long, rounded off handle comfortably and vary
the blade extension as you wish. And what if the bendable
blade gets blunt? Change is without problems.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 144.5 x 13 x 14 mm
Weight 13.2 g
Weight per unit (loose) 13.2 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX CUTTEX 9 MM STYROPOR BLADE NO. 86 NO. 86.60
with STYROPOR BLADE NO. 86 NO. 46102.08 0.40 mm, 94.8 mm long, 10 in transparent pack
loose (50 in multipack)
SNAP-OFF-BLADE NO. 76 NO. 76.60
ARGENTAX CUTTEX 9 MM 0.40 mm, 94.5 mm long, 10 in transparent pack
with SNAP-OFF-BLADE NO. 76 NO. 46100.00
1 on self-service card (10 in multipack) SNAP-OFF-BLADE NO. 776 NO. 776.60
0.40 mm, 55 mm long, 10 in transparent pack
Small, light, handy Easy blade changing Adjusts well Full cutting depth Practical pocket clip
The list could be contin- Your own two hands are Cardboard box, cardboard, You are on the safe side It‘s good to have a useful
ued endlessly. That‘s why enough to assist you. Just paper? It‘s all the same. with your polystyrene helper such as the ARGEN-
the long plastic handle is pull off the cap at the end You can flexibly adapt your blade even at a maximum TAX CUTTEX 9 MM at hand,
rounded off at many points of the handle, press the cutter to the respective blade extension. Because fast. You can attach it to
to make handling it even slider downwards and final- conditions with the adjust- it is extremely bendable your shirt or trouser pocket
more pleasant and com- ly towards the back and out able blade extension. and can therefore carry the with the pocket clip and
fortable for you. of the handle. Remove the load of even a high degree then you just have to
blade. Done. of stress. reach out.
8 9
ARGENTAX CUTTEX 18 MM PRODUCT FEATURES NO. 46202.08
NO. 46202.08 Application Technical features
Classic cutter. With an 18 mm polystyrene blade.
Main cutting materials
If you are looking for a mature cutter with a variable blade
extension, the ARGENTAX CUTTEX 18 MM with a wide pol-
ystyrene blade is a very good choice. Just like its narrow
“brother“, the ARGENTAX CUTTEX 9 MM, it fits very well into
your hand. But it is not just useful for cutting cardboard box-
es, cardboard and paper, but also adhesive and other types
of tape. You can easily change the bendable blade.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 178 x 18 x 26 mm
Weight 41.0 g
Weight per unit (loose) 41.0 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
90 % of original size USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX CUTTEX 18 MM STYROPOR BLADE NO. 79 NO. 79.60
with STYROPOR BLADE NO. 79 NO. 46202.08 0.50 mm, 109.5 mm long, 10 in transparent pack
loose (40 in multipack)
STYROPOR BLADE NO. 179 NO. 179.60
ARGENTAX CUTTEX 18 MM 0.50 mm, 109.5 mm long, stainless,
SNAP-OFF-BLADE NO. 77 NO. 46200.00 10 in transparent pack
1 on self-service card (10 in multipack)
SNAP-OFF-BLADE NO. 77 NO. 77.60
Light and handy Easy blade changing Adjusts well Full cutting depth Practical pocket clip 0.50 mm, 109.6 mm long, 10 in transparent pack
The long plastic handle lies Your own two hands are Cardboard box, cardboard, You are on the safe side It‘s good to have a useful
very comfortably in your enough to assist you. Just paper? It‘s all the same. with your polystyrene helper such as the AR-
hand. It is also rounded pull off the cap at the end You can flexibly adapt your blade even at a maximum GENTAX CUTTEX 18 MM at
off at many points to make of the handle, press the sli- cutter to the respective blade extension. Because hand, fast. You can attach
handling even more ple- der downwards and finally conditions with the adjus- it is extremely bendable it to your shirt or trouser
asant and comfortable towards the back and out table blade extension. and can therefore carry the pocket with the pocket clip
for you. of the handle. Remove the load of even a high degree and then you just have to
blade. Done. of stress. reach out.
10 11
ARGENTAX MULTIPOS PRODUCT FEATURES NO. 00915210.02
NO. 00915210.02 Application Technical features
An energy package for any kind of job. With a trapezoid blade.
There are a couple of substantial reasons that favour the
ARGENTAX MULTIPOS – in the true sense of the word. The
fully revised cutter is made entirely out of zinc. An improved Main cutting materials
ergonomic design goes hand in hand with the familiar high
degree of versatility and robustness. So you can work with
the ARGENTAX MULTIPOS on various cutting materials. The
blade extension can also be adjusted to several levels. As an
“emergency reserve“ there are five spare blades in the handle.
PRODUCT DETAILS
Main material Zinc
Knife size (L x W x H) 150 x 18.5 x 35 mm
Weight 168.0 g
Weight per unit (single unit box) 178.0 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
HOLSTER SMALL NO. 9842.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX MULTIPOS TRAPEZOID BLADE NO. 51 NO. 51.70
with TRAPEZOID BLADE NO. 51 and 5 spare blades NO. 00915210.02 0.63 mm, 10 in dispenser
1 in single unit box (10 in multipack)
TRAPEZOID BLADE NO. 52 NO. 52.70
0.63 mm, 10 in dispenser
TRAPEZOID BLADE NO. 610 NO. 610.70
0.63 mm, stainless, 10 in dispenser
Stable Design Made of full metal For right and left handers 2-cutting edge blade It‘s all in the handle.
TRAPEZOID BLADE NO. 5132 NO. 5132.70
As you can see and feel, The ARGENTAX MULTIPOS As you can see, the slider Before changing the quality You will find no less than
0.63 mm, deep-edged, 10 in dispenser
the ARGENTAX MULTIPOS is a tool that seems to be is on top of the handle, and blade, you can turn it over five spare blades in the
is extremely stable. And made of one casting. Zinc can therefore be operated once. That doubles the usa- handle of the ARGEN- TRAPEZOID BLADE NO. 5232 NO. 5232.70
flexible, since you can use die casting, to be precise. in the same way for the left ge time of the blade and TAX MULTIPOS. With this 0.63 mm, deep-edged, 10 in dispenser
a large number of blade The end of the ergonomic- and the right thumb. The er- reduces the energy you stock of trapezoid blades, TRAPEZOID BLADE NO. 5233 NO. 5233.70
shapes. The product is ally designed handle forms gonomically shaped handle spend. Because your pro- nothing stands in the way 0.63 mm, 1-sided ground-edge, 10 in dispenser
therefore suitable for many an eyelet for fastening. also fits into any hand. duct cuts like new again. of a consistently high cut-
TRAPEZOID BLADE NO. 65232 NO. 65232.70
cutting applications. ting performance. 0.63 mm, rounded blade tips, deep-edged,
10 in dispenser
HOOK BLADE NO. 56 NO. 56.70
0.63 mm, 10 in dispenser
HOOK BLADE NO. 5634 NO. 5634.70
0.63 mm, rounded blade tips, 10 in dispenser
12 13
ARGENTAX FILIUS PRODUCT FEATURES NO. 19152.02
NO. 19152.02 Application Technical features
Big in matters of versatility. With a trapezoid blade.
The ARGENTAX FILIUS is a small cutter with manual blade
retraction that can be used in a variety of ways. It has a pre-
ference for cardboard and film. You can push the blade out- Main cutting materials
wards in three different cutting depths through the adjustable
slider. Or back into the handle to hide it safely. You can choo-
se between several blade variants, from stainless to rounded.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 113.8 x 12.3 x 29.7 mm
Weight 24.5 g
Weight per unit (single unit box) 30.0 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX FILIUS with TRAPEZOID BLADE NO. 5232 NO. 19152.02 TRAPEZOID BLADE NO. 5232 NO. 5232.70
1 in single unit box (10 in multipack) 0.63 mm, deep-edged, 10 in dispenser
ARGENTAX FILIUS with HOOK BLADE NO. 56 NO. 19156.02 TRAPEZOID BLADE NO. 610 NO. 610.70
1 in single unit box (10 in multipack) 0.63 mm, stainless, 10 in dispenser
TRAPEZOID BLADE NO. 5233 NO. 5233.70
0.63 mm, 1-sided ground-edge, 10 in dispenser
Easy blade changing 2-cutting edge blade Small, light, handy
TRAPEZOID BLADE NO. 54065 NO. 54065.70
The ARGENTAX FILIUS has Before you have to change These are all properties
0.63 mm, carbon steel, 10 in dispenser
been designed so that the quality blade, you can that will assist you in wor-
changing blades is effort- turn it over once. This will king without fatigue. In TRAPEZOID BLADE NO. 65232 NO. 65232.70
less. Just press the slider double the usage time of addition, there is another 0.63 mm, rounded blade tips, deep-edged,
10 in dispenser
downwards and guide it at the blade – and reduce the useful detail: the grooves
the back out of the handle. energy you spend. Because at the front of the handle. HOOK BLADE NO. 56 NO. 56.70
And the blade is ready your product will cut like So that you don‘t lose 0.63 mm, 10 in dispenser
to use. new again. your grip. HOOK BLADE NO. 5634 NO. 5634.70
0.63 mm, rounded blade tips, 10 in dispenser
HOOK BLADE NO. 58065 NO. 58065.42
0.63 mm, carbon steel, 5 paper-wrapped
14 15
ARGENTAX RAPID PRODUCT FEATURES NO. 594.03
NO. 594.03 Application Technical features
Two blades, one goal: silicon.
Main cutting materials
The ARGENTAX RAPID has found its purpose: silicon cart-
ridges. It has two blades to deal with them. One small pointed
one, that you can use to scratch and cut open the plug. And
a rectangular one which caps the spout opening like a guillo-
tine according to the thickness you require. Nothing can then
come in the way of your actual work, such as renewing joints.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 131 x 15.5 x 43.5 mm
Weight 42.5 g
Weight per unit (self-service single unit box) 56.5 g
ACCESSORIES ORDER NO.
BELT HOLSTER S WITH CLIP NO. 9920.08
ALL MODELS ORDER NO.
ARGENTAX RAPID NO. 594.03
1 in self-service single unit box (10 in multipack)
Installed blades
The blades cannot be changed.
POINTED BLADE: Blade thickness 0.30 mm.
INDUSTRIAL BLADE: Blade thickness 0.50 mm.
Two functions For left and right handers Practical eyelet Safe when you are on the go
Ever had problems with a It makes no difference You won‘t have to do The cutter has a protective
silicon cartridge? First of all, whether you are left or without it in this special cap to ensure that personal
with the closed plug? And right handed when using cutting tool: the practical transporting is safe. It cov-
right after that, the spout the ARGENTAX RAPID. eyelet for attaching. So you ers the pointed blade.
opening, that is too nar- You will always work with can hang up the ARGENTAX The sharp edges of the sec-
row? The ARGENTAX RAPID the same precision. Any RAPID safely, and always ond blade are best stored in
can provide first class hand can take care of the find it again. the handle.
cutting in both cases. ARGENTAX RAPID.
16 17ARGENTAX MITRE CUTTER PRODUCT FEATURES NO. 57542.02
NO. 57542.02 Application Technical features
Chamfer on insulation boards? No problem.
Main cutting materials
Unusual name, unusual tool. Using the ARGENTAX MITRE
CUTTER you can prepare insulation boards at thicknesses of
up to 15 mm. Specifically, you cut at a 45 degree mitre using
the two slanted blades. You can then join the two boards to
fit exactly. Cutting tasks are made easier through an ergono-
mically designed handle and the smooth, slideable underside.
In addition, the handle holds five spare blades.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 100 x 67 x 62 mm
Weight 108.0 g
Weight per unit (single unit box) 163.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
ARGENTAX MITRE CUTTER with 2 TRAPEZOID BLADES TRAPEZOID BLADE NO. 42045 NO. 42045.50
NO. 42045 and 5 spare blades NO. 57542.02 0.45 mm, deep-edged, 10 in dispenser
1 in single unit box
45 degree cutting angle 2-cutting edge blade
Whether at home or at Before changing the qua-
work: as a craftsman, lity blade, you can turn it
any relief in your work is around once. That doubles
welcome. That‘s why the the usage time of the
cutting angle of the two blades and reduces the
trapezium blades has been energy you spend. Because
precisely adjusted. The your product will cut like
smooth bottom surface new again.
also slides easily over
the material.
18 19GRAFIX For those who like to be accurate to the millimetre: with our GRAFIX tools you can cut reliably and with the highest precision, whether you’re at work or at home, a graphic designer or an architect, a handicraft enthusiast or a model builder. The cut- ting performance of our scalpels ranges from fine paper through to thin cardboard and smooth films on to fabrics and textiles.
GRAFIX BOY PRODUCT FEATURES NO. 31172.00
NO. 31172.00 Application Technical features
If you are particular about details. With a prominent tip.
GRAFIX BOY is something of a “fine fellow” among scalpels.
That‘s because it is suitable for particularly precise and deli-
cate cutting work. Or for careful erasing. You hold the cutting Main cutting materials
tool made of aluminium in your hand as you would hold a
writing instrument. It is also very uncomplicated to handle,
for example, blade changing.
PRODUCT DETAILS
Main material Aluminium
Knife size (L x W x H) 148 x 8.2 x 8.2 mm
Weight 17.3 g
Weight per unit (self-service card) 32.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
GRAFIX BOY with GRAPHIC BLADE NO. 72 NO. 31172.00 GRAPHIC BLADE NO. 72 NO. 72.50
1 on self-service card (10 in multipack) 0.50 mm, 10 in magazine
GRAFIX BOY with CONVEX BLADE NO. 33 NO. 31133.00 CONVEX BLADE NO. 33 NO. 33.50
1 on self-service card (10 in multipack) 0.50 mm, 10 in magazine
GRAPHIC BLADE NO. 43 NO. 43.50
0.40 mm, 10 in magazine
Made of aluminium Easy blade changing Light and handy
The heading already says Changing blades is so easy, GRAFIX BOY convinces you
everything. The GRAFIX that you only need to re- with its light and handy
BOY is an extremely robust member the following: turn appearance. The pen-type
cutting tool. Whether as a open the knurled nut and handle ends in a knurled
handyman, artist or graphic release the blade holder. nut which prevents your
designer – you will definite- Take out the blade, put in fingers from slipping.
ly count the scalpel as one the new one, done.
of your assistants for a
long time.
22 23GRAFIX 501 PRODUCT FEATURES NO. 501.00
NO. 501.00 Application Technical features
The artist among scalpels.
Main cutting materials
Are you from an industry where the details matter? The
GRAFIX 501 is made for all fine cutting work – as well as for
erasing. Advertising agencies and technical offices therefore
reach out for the GRAFIX 501. It‘s also because the exception-
ally large variety of blades will encourage your creativity.
PRODUCT DETAILS
Main material Aluminium
Knife size (L x W x H) 145 x 8.2 x 8.2 mm
Weight 14.6 g
Weight per unit (self-service card) 30.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
GRAFIX 501 with GRAPHIC BLADE NO. 680 NO. 501.00 GRAPHIC BLADE NO. 680 NO. 680.50
1 on self-service card (10 in multipack) 0.50 mm, 10 in magazine
GRAFIX 501 with NEEDLE BLADE NO. 673 NO. 810.00 NEEDLE BLADE NO. 673 NO. 673.50
1 on self-service card (10 in multipack) 2.50 mm, 10 in magazine
TRIMMING BLADE NO. 674 NO. 674.50
0.50 mm, 10 in magazine
Robust Design Easy blade changing Easy and handy A wide range of blades
GRAPHIC BLADE NO. 677 NO. 677.50
The handle and knurled And how easy it is: You The GRAFIX 501 not only 0.50 or 2.50 mm thick,
0.50 mm, 10 in magazine
nut are made completely turn open the knurled nut looks like a pen it also feels needle type or rounded,
out of aluminium. For you, and you can then take out like one in your hand. The single and double edge CONVEX BLADE NO. 679 NO. 679.50
this means that you can the old blade. The choice of grooves on the knurled nut grounded? As you can see, 0.50 mm, 10 in magazine
definitely count the GRAFIX new blade is more difficult contribute to this feeling. there are no limits to the GRAPHIC BLADE NO. 34 NO. 34.50
501 as your companion for as there is a wide range of An open view on to the imagination as far as blade 0.50 mm, 10 in magazine
a long time. alternatives. point of cutting in is also varieties are concerned.
GRAPHIC BLADE NO. 834 NO. 834.65
an advantage. 0.50 mm, TiN-coated, 100 in safety dispenser
GRAPHIC BLADE NO. 629 NO. 629.50
0.50 mm, rounded blade tip, 10 in magazine
GRAPHIC BLADE NO. 8629 NO. 8629.65
0.50 mm, rounded blade tip, cutting edge TiN-coated,
100 in safety dispenser
GRAPHIC BLADE NO. 605 NO. 605.50
0.50 mm, 10 in magazine
GRAPHIC BLADE NO. 8605 NO. 8605.65
0.50 mm, TiN-coated, 100 in safety dispenser
GRAPHIC BLADE NO. 606 NO. 606.50
0.50 mm, rounded blade tip, 10 in magazine
GRAPHIC BLADE NO. 8606 NO. 8606.65
0.50 mm, rounded blade tip, cutting edge TiN-coated,
100 in safety dispenser
24 25GRAFIX PICCOLO PRODUCT FEATURES NO. 32132.00
NO. 32132.00 Application Technical features
Cut, deburr – and convince!
Whether in the office or in your free time, whether for graphic
designers, handymen or model builders, the GRAFIX PICCOLO
provides valuable services everywhere. You can use this alu- Main cutting materials
minium tool just as well for cutting and deburring. The handy
grip and the available blades are retractable. For your safety.
PRODUCT DETAILS
Main material Aluminium
Knife size (L x W x H) 120 x 8 x 8 mm
Weight 19.2 g
Weight per unit (self-service card) 30.3 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
GRAFIX PICCOLO with GRAPHIC BLADE NO. 32 NO. 32132.00 GRAPHIC BLADE NO. 32 NO. 32.50
1 on self-service card (10 in multipack) 0.63 mm, 2-sided ground-edge, 45° angle,
10 in magazine
GRAPHIC BLADE NO. 746 NO. 746.50
0.63 mm, 2-sided ground-edge, 36° angle,
10 in magazine
Robust Design Easy and handy 2-cutting edge blade Clip for attaching. Retractable blade GRAPHIC BLADE NO. 784 NO. 784.50
0.63 mm, 10 in magazine
You can already feel the The GRAFIX PICCOLO is The mounted blade of the The TRIMMEX PICCOLO You just have to turn open
resistance of the GRAFIX as light and handy as the TRIMMEX PICCOLO is very doesn‘t just look like a writ- the handle and hold the tip GRAPHIC BLADE NO. 8784 NO. 8784.50
PICCOLO the first time you name promises. It also has versatile. On one side it is ing tool. It also has a clip at upwards and the blade will 0.63 mm, TiN-coated, 10 in magazine
use it. The aluminium han- slightly raised grooves in completely slanted, on the the end of its handle with slip into the handle. Don‘t TRIMMING BLADE NO. 674 NO. 674.50
dle and the stable design the front area of the han- other it runs in a pointed tip which you can attach your forget to screw it shut 0.50 mm, 10 in magazine
deserve the rating “excep- dle. One benefit for you is: to the middle. Choose for cutting tool to your inside again! Only the V-shaped
tionally durable.” an even better grip. yourself! or outside pocket. polished blade is unsuitable
for it.
26 27GRAFIX SCALPEL SMALL PRODUCT FEATURES NO. 23111.54
NO. 23111.54 Application Technical features
The kind of scalpel one wishes for. With a prominent point.
Main cutting materials
A picture book scalpel in form and function – or just one from
the MARTOR range of products. You can work on graphic
paper, film sheets and much more with the GRAFIX SCALPEL
SMALL. Since it is made out of chrome plated steel, you can
easily place more stress on it. In this variant we have fitted a
small scalpel blade with a prominent point.
PRODUCT DETAILS
Main material Steel
Knife size (L x W x H) 140.5 x 4 x 12 mm
Weight 25.0 g
Weight per unit (magazine) 45.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
GRAFIX SCALPEL SMALL with SCALPEL BLADE NO. 11 NO. 23111.54 SCALPEL BLADE NO. 11 NO. 11.50
1 in magazine (25 in multipack) 0.40 mm, 10 in magazine
GRAFIX SCALPEL SMALL with SCALPEL BLADE NO. 12 NO. 23112.54 SCALPEL BLADE NO. 12 NO. 12.50
1 in magazine (25 in multipack) 0.40 mm, 10 in magazine
SCALPEL BLADE NO. 13 NO. 13.50
GRAFIX SCALPEL SMALL with SCALPEL BLADE NO. 13 NO. 23113.54 0.40 mm, 10 in magazine
Stable Design A wide variety of blades Tool-less blade change Ergonomic handle 1 in magazine (25 in multipack)
SCALPEL BLADE NO. 14 NO. 14.50
No wonder, since your You will definitely also like You can lift the blade a little In spite of the material,
0.40 mm, 10 in magazine
precise cutting tool is made the large selection of blades at the back with one hand. your scalpel is lightweight.
100 % out of forged and provided for this scalpel. At the same time, you pull The rounded-off handle SCALPEL BLADE NO. 15 NO. 15.50
chrome plated steel. This So you can re-equip your it out at the front with the end and the grooved sur- 0.40 mm, 10 in magazine
robustness will definitely be- product depending on pre- other hand. Now insert the faces for a firmer grip are SCALPEL BLADE NO. 16 NO. 16.50
nefit you in your daily work. ference and cutting material new blade, ready. pleasant additions. The 0.40 mm, 10 in magazine
with a few hand grips. open view of the cutting
SCALPEL BLADE NO. 10 NO. 10.50
point also assists you in 0.40 mm, 10 in magazine
your work.
SCALPEL BLADE NO. 1031 NO. 1031.50
0.40 mm, 10 in magazine
28 29SCRAPEX Labels and stickers, paint and varnish residue, glues and mortar all get where they don‘t belong, for example on the floor, the wall or a work sur- face. This is no problem when you go to work on them with a professional scraper. With SCRAPEX tools by MARTOR you can clean all smooth sur- faces carefully without leaving a trace.
SCRAPEX ARGENTAX PRODUCT FEATURES NO. 46144.02
NO. 46144.02 Application Technical features
Top forming, top form.
Main cutting materials
It really feels good, the large, rounded handle of the SCRAPEX
ARGENTAX. But even the performance of this classic scraper
convinces. So you can free all smooth surfaces from residue
and remains with it – no matter whether at work or at home.
When you‘re done, push the protective cap over the blade,
and everything is safe.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 165 x 16.7 x 45 mm
Weight 81.5 g
Weight per unit (single unit box) 95.5 g
ACCESSORIES ORDER NO.
BELT HOLSTER L WITH CLIP NO. 9922.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
85 % of original size
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
SCRAPEX ARGENTAX REINFORCED RAZOR BLADE NO. 44 NO. 44.50
with REINFORCED RAZOR BLADE NO. 44 NO. 46144.02 0.30 mm, 10 in magazine
1 in single unit box (10 scrapers in multipack)
REINFORCED RAZOR BLADE NO. 144 NO. 144.50
0.25 mm, stainless, 10 in magazine
REINFORCED RAZOR BLADE NO. 60044 NO. 60044.50
0.30 mm, rounded blade tips, 10 in magazine
Especially ergonomic Large blade extension Flexible to use For right and left Easy blade changing
Ergonomics is not the There is comparatively a The SCRAPEX ARGENTAX The SCRAPEX ARGENTAX And that completely with-
exception with us, but the lot of blade available for a is very suitable for flat fits into every hand. No out a tool: you just have to
rule. Even a scraper like the scraper. The advantage: scraping angles. So you can matter whether it‘s your push the blade to the side
SCRAPEX ARGENTAX waits You can reach between the depend on your scraper right or your left hand. and take it out.
for you with a rounded surface and remains of the even in difficult situations. Because the handle has
handle, which you would glue much more easily and been shaped in such a
gladly also hold for longer can then remove it much balanced way, that no
in you hand. more easily too. type of handling is pre-
ferred or neglected.
32 33SCRAPEX 596 PRODUCT FEATURES NO. 596.03
NO. 596.03 Application Technical features
Nothing stays behind except satisfaction.
The SCRAPEX 596 is the largest scraper in our product range
together with the even longer SCRAPEX 5196. Use it for effort-
less removal of stickers, labels and other paper, colour and Main cutting materials
paint residue on all smooth surfaces. You can work especially
effectively with the 100 mm long blade. Your professional
tool also convinces with a non-slip handle and the built-in
safeguard.
PRODUCT DETAILS
Main material Zinc
Knife size (L x W x H) 180 x 27 x 100 mm
Weight 290.0 g
Weight per unit (self-service single unit box) 320.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
70 % of original size
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
SCRAPEX 596 with SCRAPER BLADE NO. 96 NO. 596.03 SCRAPER BLADE NO. 96 NO. 96.60
1 in self-service single unit box 0.40 mm, 10 in transparent pack
SCRAPEX 5196 with an extra long handle and SCRAPER BLADE NO. 196 NO. 196.60
SCRAPER BLADE NO. 96 NO. 5196.02 0.40 mm, non-corrosive, 10 in transparent pack
1 in single unit box
Robust and durable Broad user surface Safeguard included Non-slip handle Easy blade changing
The 11 cm long handle is Considering it has a blade To cover the wide blade, A tool of such dimensions The special screw will also
made of die-cast zinc. What length of 100 mm, you are release the special screw should not slip in your help you change blades.
does that mean to you? already working on a large manually and push the hands. Of course, we have Turn it open and remove
Definitely a scraper with area of use. So you clearly blade cover to the front thought of that – and have the blade cover. Now you
a long life, also armed for don‘t have to use your with your thumb. Now turn therefore equipped the can take out and change
the hardest of jobs. scraper vey often to clean the screw on again to shut handle with a non-slip soft the blade.
a certain surface. it and everything is safe. grip and small pores that
are friendly to the hands.
34 35SCRAPEX CLEANY PRODUCT FEATURES NO. 544.00
NO. 544.00 Application Technical features
What it does? Clean work.
Main cutting materials
Labels on the floor? Remains of materials tightly stuck? You
can easily clean all smooth surfaces with the SCRAPEX CLEANY.
The handy scraper is made of plastic. You can push its blade
out of the handle with the practical slider, and after use, push
it back in again to store it safely. Blade changing is also as
easy as pie.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 105.5 x 11.5 x 50 mm
Weight 35.0 g
Weight per unit (self-service card) 45.5 g
ACCESSORIES ORDER NO.
BELT HOLSTER M WITH CLIP NO. 9921.08
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
SCRAPEX CLEANY REINFORCED RAZOR BLADE NO. 44 NO. 544.00 REINFORCED RAZOR BLADE NO. 44 NO. 44.50
1 on self-service card (10 scrapers in multipack) 0.30 mm, 10 in magazine
REINFORCED RAZOR BLADE NO. 144 NO. 144.50
0.25 mm, stainless, 10 in magazine
REINFORCED RAZOR BLADE NO. 60044 NO. 60044.50
0.30 mm, rounded blade tips, 10 in magazine
Good handling Transport safely Easy blade changing Practical eyelet For right and left
The end of the handle is You don‘t just release the Changing blades is possible You do not have to do The SCRAPEX CLEANY fits
rounded so that it doesn‘t blade with the slide but without tools. You press without the eyelet with the into every hand, no mat-
press into your hand. The also pull it back into the the slider as far as possi- SCRAPEX CLEANY. You can ter whether it‘s your right
grooves on the slide and in handle. It remains tight and ble to the front with your just pull a strap through it or left hand. Because the
the front handle area also safe there – so that you hand and release the blade and hang up the scraper handle has been shaped
make your work easier. And can transport your cutting in this way. Now you can wherever you need it. in such a balanced way
the integrated blade maga- tool without any problems. push it out to the side. that no type of handling is
zine is comfortable too. preferred or neglected.
36 37TRIMMEX The final touch for your tool? Use our high quality deburring tools. You can use the TRIMMEX family by MARTOR to deburr soft and hard materials, on internal and external edges, on curved and straight surfaces. Our wide selection of matching handles and blades work to create a clean result.
TRIMMEX CUTTOGRAF PRODUCT FEATURES NO. 69606.00
NO. 69606.00 Application Technical features
Discover its talents. With a rounded-off blade.
A cutting tool that offers you a whole lot of possibilities?
MARTOR has plenty of those. Like the TRIMMEX CUTTOGRAF
with which you can cut and deburr effortlessly. We have fit- Main cutting materials
ted a blade with a rounded-off point in this variant which we
recommend for both types of work. You can adjust the blade
extension individually according to the material and the use.
PRODUCT DETAILS
Main material Glass fibre reinforced
plastic
Knife size (L x W x H) 145 x 16 x 18 mm
Weight 24.3 g
Weight per unit (self-service card) 35.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO.
TRIMMEX CUTTOGRAF with GRAPHIC BLADE NO. 606 NO. 69606.00
1 on self-service card (10 in multipack)
TRIMMEX CUTTOGRAF with SCALPEL BLADE NO. 11 NO. 69111.00
1 on self-service card (10 in multipack)
MOUNTABLE BLADES ORDER NO.
GRAPHIC BLADE NO. 606 NO. 606.50 GRAPHIC BLADE NO. 605 NO. 605.50
0.50 mm, rounded blade tip, 10 in magazine 0.50 mm, 10 in magazine
SCALPEL BLADE NO. 11 NO. 11.50 GRAPHIC BLADE NO. 629 NO. 629.50
0.40 mm, 10 in magazine 0.50 mm, rounded blade tip, 10 in magazine
SCALPEL BLADE NO. 12 NO. 12.50 GRAPHIC BLADE NO. 677 NO. 677.50
0.40 mm, 10 in magazine 0.50 mm, 10 in magazine
Easy blade changing A wide variety of blades Easy and handy Flexible blade extension Practical eyelet
SCALPEL BLADE NO. 13 NO. 13.50 GRAPHIC BLADE NO. 680 NO. 680.50
One could also describe it Count for yourself. There is Working comfortably also You can decide for yourself, You do not have to do
0.40 mm, 10 in magazine 0.50 mm, 10 in magazine
as intuitive. You can push definitely the right one for always depends on the how far the blade should without an eyelet in the
the blade holder right to you among this unusually handiness of the tool. protrude out of the holder. TRIMMEX CUTTOGRAF. SCALPEL BLADE NO. 14 NO. 14.50 GRAPHIC BLADE NO. 834 NO. 834.65
the front to remove the large selection of blades. That‘s why the handle of So you can finely adjust the You can just pull a strap 0.40 mm, 10 in magazine 0.50 mm, TiN-coated, 100 in safety dispenser
blade. Put the new one in, Meaningful and safe: many the TRIMMEX CUTTOGRAF cutting tool time and again through it and hang the SCALPEL BLADE NO. 15 NO. 15.50 GRAPHIC BLADE NO. 8605 NO. 8605.65
replace the holder, ready. of the blades can be lowe- is ergonomically shaped. after each use. cutting tool up wherever 0.40 mm, 10 in magazine 0.50 mm, TiN-coated, 100 in safety dispenser
red into the handle. The grooves on the top you need it.
SCALPEL BLADE NO. 16 NO. 16.50 GRAPHIC BLADE NO. 8606 NO. 8606.65
and at the bottom give 0.40 mm, 10 in magazine 0.50 mm, rounded blade tip, cutting edge TiN-coated,
you an even better grip 100 in safety dispenser
when cutting. SCALPEL BLADE NO. 10 NO. 10.50
0.40 mm, 10 in magazine GRAPHIC BLADE NO. 8629 NO. 8629.65
0.50 mm, rounded blade tip, cutting edge TiN-coated,
SCALPEL BLADE NO. 1031 NO. 1031.50 100 in safety dispenser
0.40 mm, 10 in magazine
CONVEX BLADE NO. 33 NO. 33.50
GRAPHIC BLADE NO. 34 NO. 34.50 0.50 mm, 10 in magazine
0.50 mm, 10 in magazine
CONVEX BLADE NO. 679 NO. 679.50
GRAPHIC BLADE NO. 43 NO. 43.50 0.50 mm, 10 in magazine
0.40 mm, 10 in magazine
SMALL SPECIAL PURPOSE BLADE NO. 643 NO. 643.50
GRAPHIC BLADE NO. 72 NO. 72.50 0.50 mm, 10 in magazine
0.50 mm, 10 in magazine
40 41TRIMMEX SIMPLASTO PRODUCT FEATURES NO. 514.00
NO. 514.00 Application Technical features
Metal on the inside, plastic on the outside, round at the front.
The TRIMMEX SIMPLASTO is covered with non-slip plastic.
It is best used for fine and precise cutting work with paper
and cardboard. Or you can deburr different types of plastic Main cutting materials
parts with it. You can safely shield the pointed blade with
the plastic cap included.
PRODUCT DETAILS
Main material Softgrip-coated
aluminium handle
Knife size (L x W x H) 162 x 7.5 x 17 mm
Weight 24.2 g
Weight per unit (self-service card) 37.5 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
SAFEBOX NO. 108000.00
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
TRIMMEX SIMPLASTO with GRAPHIC BLADE NO. 629 NO. 514.00 GRAPHIC BLADE NO. 629 NO. 629.50
1 on self-service card (10 in multipack) 0.50 mm, rounded blade tip, 10 in magazine
TRIMMEX SIMPLASTO with GRAPHIC BLADE NO. 34 NO. 35134.00 GRAPHIC BLADE NO. 34 NO. 34.50
1 on self-service card (10 in multipack) 0.50 mm, 10 in magazine
GRAPHIC BLADE NO. 834 NO. 834.65
0.50 mm, TiN-coated, 100 in safety dispenser
Particularly robust Particularly slip resistant Practical eyelet
GRAPHIC BLADE NO. 8629 NO. 8629.65
And not without a reason: Because the aluminium You don‘t have to do
0.50 mm, rounded blade tip, cutting edge TiN-coated,
the handle is made com- core is surrounded by plas- without an eyelet in the 100 in safety dispenser
pletely of aluminium on the tic, it increases the slip-re- TRIMMEX SIMPLASTO.
inside, the blade itself has sistance of your cutting You can just pull a strap
been attached with two tool. So you can even hold through it and hang up
metal screws. So you can the TRIMMEX SIMPLASTO the cutter wherever you
rely on the stability. firmly with sweaty hands. need it.
42 43TRIMMEX CERACUT PRODUCT FEATURES NO. 170170.00
NO. 170170.00 Application Technical features
Ceramic for deburring. With a straight blade.
Main cutting materials
Why are ceramic blades ideal for deburring plastics and met-
als? Because they are very resistant und durable due to their
enormous hardness. That‘s why the TRIMMEX CERACUT can
smooth edges and remove sprayed points and separation
lines from mould halves. Furthermore, the characteristic
grinding of the MARTOR ceramic blade minimizes your per-
sonal risk of injury.
PRODUCT DETAILS
Main material Plastic
Knife size (L x W x H) 175 x 16 x 26 mm
Weight 38.9 g
Weight per unit (self-service card) 50.0 g
ACCESSORIES ORDER NO.
USED BLADE CONTAINER NO. 9810.08
WALL MOUNT BRACKET USED NO. 9845.06
BLADE CONTAINER
ALL MODELS ORDER NO. MOUNTABLE BLADES ORDER NO.
TRIMMEX CERACUT with CERAMIC BLADE NO. 170 NO. 170170.00 CERAMIC BLADE NO. 170 NO. 170.55
1 on self-service card (10 in multipack) 1.70 mm, rust and acid resistant,
1 in magazine on self-service card
TRIMMEX CERACUT with CERAMIC BLADE NO. 171 NO. 170171.00
CERAMIC BLADE NO. 171 NO. 171.55
1 on self-service card (10 in multipack)
1.70 mm, rust and acid resistant,
1 in magazine on self-service card
Straight blade Easy blade changing Space for spare blades
The straight but slightly Just remove the cutter cap Under the cap also lies
arched cutting edge ena- at the back and push the concealed an ideal storage
bles you to remove excess round opening further to place for your spare blades.
material exactly in line the front. Turn it around Cap down, blades in –
with the contours and to once – and the blade has and always at hand, until
improve surfaces. It‘s best been released. needed.
to store spare blades in the
handle.
44 45ACCESSORIES Accessories are things that belong with a tool. In the best sense. Our accessories ensure, for example, that you can store your cutting tool safely. Or dispose of your used blades in an optimal manner.
BELT HOLSTER L WITH CLIP Application BELT HOLSTER M WITH CLIP Everything always at hand: BELT HOLSTER M.
The MARTOR BELT HOLSTER M is a robust hold-
NO. 9922.08 NO. 9921.08 er that allows you to carry all midsize MARTOR
knives as well as our safety scissors at all times.
In addition, the interior and exterior pockets are
Everything always at hand: BELT HOLSTER L. designed to allow you to load different tools: for
What do you do with your cutting tools when you are not example you can carry an extra safety knife, a
actually using them? The MARTOR BELT HOLSTER L is a robust pen and a pack of blades.
holder that allows you to carry all large MARTOR knives as
well as our safety scissors at all times. In addition, the interior
and exterior pockets are designed to allow you to load differ- PRODUCT DETAILS NO. 9921.08
ent tools: for example you can carry an extra safety knife,
Application Size (L x W x H) 215 x 60 x 28 mm
a pen and a pack of blades. The MARTOR BELT HOLSTER is
the ideal place to stow your tools safely when moving from Main material Nylon
A to B – and have them at hand, as soon as they are required. Weight 65.0 g
Weight per unit (loose) 65.0 g
25% of original size
BELT HOLSTER S WITH CLIP Everything always at hand: BELT HOLSTER S.
The MARTOR BELT HOLSTER S is a robust holder
NO. 9920.08 that allows you to carry all compact MARTOR
knives as well as our safey scissors at all times.
In addition, the compartments are designed to
allow you to load different tools: for example
you can also carry a pen or a pack of blades.
PRODUCT DETAILS NO. 9922.08 PRODUCT DETAILS NO. 9920.08
Size (L x W x H) 215 x 68 x 40 mm Application Size (L x W x H) 215 x 53 x 23 mm
Main material Nylon Main material Nylon
Weight 76.0 g Weight 58.0 g
Weight per unit (loose) 76.0 g Weight per unit (loose) 58.0 g
47% of original size
25% of original size
Certified safety oes it fit? Fits perfectly
D Intelligent spacesaver attachment options
2 Robust material
We always design our Our MARTOR BELT HOL- With the MARTOR BELT T he BELT HOLSTER can be T he BELT HOLSTER is now
cutting tools to the high- STERS S, M and L are HOLSTER you will always attached to your belt in an integral part of every-
est standards. So why precisely tailored for our discover new storage op- two ways: by clip-on or day working life. So there
should our accessories knives - and not just that. tions. A compartment here, velcro fastener. Velcro is is no inconvenience. This
be anything less? Our Depending on the size of a slot there – all designed recommended for belts; is further guaranteed by
MARTOR BELT HOLSTERS the pocket, it allows you so precisely to ensure the the clip can also be used its durable nylon material,
were therefore tested for to carry a combination of contents are kept as firmly on many other areas of washable at 40°C, which Suggested equipment: Suggested equipment: Suggested equipment:
harmful substances and various tools: knife/pen, as necessary while offering your clothing, such as your is held together by double BELT HOLSTER L BELT HOLSTER M BELT HOLSTER S
stability – and were found knife/scissors, knife/knife, you maximum flexibility. trouser pocket. seams – even when sub- For example for For example for For example for
to be very good. knife/pen/scissors etc. ject to permanent use. - SECUPRO 625 - SECUMAX 320 - SECUNORM 500
- SECUMAX 320 - SECUMAX 363 - SECUMAX 363
- SECUMAX 363
48 49HOLSTER LARGE For our wider cutting tools. SAFEBOX Your personal used-blade bank.
Your cutting tool will feel comfortable in this The SAFEBOX is large enough to store a large
NO. 9843.08 plastic HOLSTER. Attach it to your belt or with a NO. 108000.00 number of used blades safely. And at the same
clip to “utility“ pockets, or use it as a knife sta- time, it is compact enough to carry with you.
tion at your workplace. The larger HOLSTER in The two slits are not only used for filling, but
black is suitable, for example, for the SECUPRO also to “shorten“ your snap-off blades. When
MAXISAFE. your SAFEBOX is full, empty it into your USED
BLADE CONTAINER.
PRODUCT DETAILS NO. 9843.08 PRODUCT DETAILS NO. 108000.00
Application Size (L x W x H) 109 x 50 x 44 mm Application Size (L x W x H) 94 x 18 x 42 mm
Main material Plastic Main material Plastic
Weight 28.6 g Weight 33.6 g
Weight per unit (loose) 28.6 g Weight per unit (self-service card) 43.7 g
50% of original size
50% of original size
USED BLADE CONTAINER For the final disposal of your blades.
You can fill the USED BLADE CONTAINER with the
NO. 9810.08 content of your SAFEBOX. Or directly with your
used blades. When the box is full, turn the lid
until it shuts. Now the box cannot be reopened.
The next step is to safely and completely dis-
pose of the filled USED BLADE CONTAINER as
normal waste.
HOLSTER SMALL For our more slender cutting tools.
This blue plastic HOLSTER is just like the black PRODUCT DETAILS NO. 9810.08
NO. 9842.08 version, only smaller. Use it to safely store and Application Size (L x W x H) 107 x 105 x 210 mm
transport SECUNORM safety knives MULTISAFE,
Main material Plastic
PROFI LIGHT, PROFI40 and the SECUNORM 500.
With this HOLSTER on your hip, your knife will Weight 260.0 g
always be within grasping range. Weight per unit (loose) 260.0 g
25% of original size
PRODUCT DETAILS NO. 9842.08
Application Size (L x W x H) 104 x 33 x 40 mm WALL MOUNT BRACKET USED Makes the USED BLADE CONTAINER accessible
to all.
Main material Plastic BLADE CONTAINER Include it in your order now! With this mounting
Weight 24.0 g NO. 9845.06 bracket you can fix your USED BLADE CONTAINER
to a central location. Use the clamp and screws
Weight per unit (loose) 24.0 g
and nuts supplied with the product to attach it
to either a pipe or a rod.
50% of original size
PRODUCT DETAILS NO. 9845.06
Application Size (L x W x H) 94 x 51 x 94 mm
Main material Plastic
Weight 123.0 g
Weight per unit (single unit box) 178.0 g
45% of original size
50 51CUTTING MAT Application CUTTING MAT Application
NO. 3001.06 NO. 3005.06
CUTTING MAT with self-healing capabilities. Size 620 x 870 mm. CUTTING MAT with self-healing capabilities. Size 148 x 210 mm.
Do you want to cut without damaging the working surface? Do you want to cut without damaging surfaces? No problem.
No problem. For cutting paper, card, film etc. it is best to use For cutting paper, card, film etc. it is best to use a high-quality
a high-quality MARTOR CUTTING MAT. The mat is made of MARTOR CUTTING MAT. The mat is made of three layers: a solid
three layers: a solid core and two resistant outer surfaces. core and two resistant outer surfaces. It therefore easily tol-
It therefore easily tolerates even high-pressure cutting. The erates even high-pressure cutting. The CUTTING MAT always
CUTTING MAT always remains smooth and enables you to remains smooth and enables you to continue working cleanly.
continue working cleanly. An added aid are the printed grids Also helpful are the descriptions of MARTOR safety technology
in cm and inches. printed on the mats.
PRODUCT DETAILS NO. 3001.06 PRODUCT DETAILS NO. 3005.06
Size (L x W x H) 870 x 620 x 3 mm Size (L x W x H) 210 x 148 x 3 mm
Main material Plastic Main material Plastic
Weight 2,200.0 g Weight 120.0 g
Weight per unit (polybag) 2,200.0 g Weight per unit (polybag) 120.0 g
ALL MODELS ORDER NO.
CUTTING MAT 620 x 870 mm NR. 3001.06
1 in polybag
CUTTING MAT 440 x 620 mm NR. 3002.06
1 in polybag
CUTTING MAT 320 x 440 mm NR. 3003.06
1 in polybag
10% of original size CUTTING MAT 230 x 320 mm NR. 3004.06 40% of original size
1 in polybag
Self-healing Printed grids Large selection Self-healing With safety technologies Large selection
MARTOR cutting mats are Printed grids help you to MARTOR cutting mats are MARTOR cutting mats are You can find out how the MARTOR cutting mats are
equipped with a self-healing cut with precision. As an available in five different equipped with a self-healing three MARTOR safety available in five different
surface. They tolerate cuts extra, the mat front has a sizes, from very large to surface. They tolerate cuts technologies differ by just sizes, from very large to
from the sharpest MARTOR cm-grid and the back an very small. Depending on from the sharpest MARTOR looking at the small cutting very small. Depending on
blades and under the high- inch-grid. You can choose the task and the working blades and under the high- mat. The front is in German the task and the working
est pressures and look new the grid-size you need. environment, you’ll always est pressures and look new and English, the back in environment, you’ll always
again after cutting. find the format you need again after cutting. French and Spanish. find the format you need
at MARTOR. at MARTOR.
52 53OUR ADDITIONAL SERVICE MEDIA: OUR WEBSITE.
BROCHURES, CATALOGUES ETC. WITH CUSTOMER-ORIENTED SERVICES.
You can request these and all other service media directly from us – ideally by calling our When looking for the best possible product there is nothing like personal assistance, which
service number or by visiting our website, where they are available for download. is one of our strengths. Nevertheless, we would like to satisfy your needs in the best
possible way also in other areas – e.g. on our website www.martor.com. Where you can find
functionalities, such as the product filter, providing you with an even better overview of our
cutting solutions.
noch sicherer
r sind immer für
Anwendungsbei-
n und natürlich
SICHERHEITSMESSER
UND ZUBEHÖR
›› Hier geht’s zum
ausführlichen
Inhaltsverzeichnis.
Bitte aufklappen!
Filter all
Which material do you want to cut? And what
.
n Sie auf unserer
2019/2020
herheitsposter bilden
und die korrekte
hren Arbeitsplatz. MARTOR IST DER INTER-
technical properties should your safety knives
NATIONAL F Ü H R E N D E
have? You can access a selection of suitable
Wechseln der Klinge:
n einen Eindruck
unsere Messer ver-
PARTNER FÜR INNOVA-
TIVE SCHNEIDLÖSUNGEN,
products quickly and comfortably through these
n: Maße, Eigen-
und mehr über
erfahren Sie in den
BESONDERS IM BEREICH
e erreichen uns unter DER SICHERHEITSMESSER.
DIESER KATALOG STELLT
IHNEN UNSER HOCHWERTI- and many other filter functions. A suitable
GES PRODUKT SORTIMENT
supplier can be found, for example, via our
ufenden bleiben?
VOR. DABEI ERFAHREN SIE FÜNF GUTE GRÜNDE,
NICHT NUR ALLES WISSENS- EIN WERBEMESSER
WERTE ÜBERS JEWEILIGE
SCHNEIDWERKZEUG. SIE
ZU VERSCHENKEN. new distributor search.
SICHERHEITSMESSER UND ZUBEHÖR 2019/2020
ERHALTEN AUCH ALLE DA-
TEN UND FAKTEN, DIE SIE
FÜR EINE ZIELGERICHTETE
BESTELLUNG BENÖTIGEN.
rinted in Germany
ngen vorbehalten WILLKOMMEN BEI MARTOR
MARTOR WERBEMESSER 2
05.03.2019 14:47:57
WWW.MARTOR.COM
Safety knives and scissors Promotional knives brochure Knife plan
In this catalogue we present you Another MARTOR product family is Each MARTOR knife plan is unique.
our safety knives: high quality cut- our promotional knives. They are We work with a company‘s safety
ting tools equipped with reliable introduced to you individually in this officers, plant managers, etc. to
safety technologies such as con- brochure. No matter whether you create an individual plan which
cealed blade, fully automatic blade work as a distributor for promotion- portrays and describes the cut-
retraction and automatic blade re- al products or whether, as a compa- ting tools currently in use at your
traction. Furthermore: our SOS and ny or institution, you are looking for premises. The plan also serves as
MDP (= metal detectable) cutters. the ideal promotional gift for your- instructions for users and clearly
self or your target group. specifies which MARTOR knife is
to be used in which area and for Compare all
which purpose. This also aids occu- No doubt there are cutting tools in our product
pational safety and work efficiency. range that are similar. So it‘s worth it to take
a second view. With the functionality to com-
pare products, you can select up to four cutting
tools and check them against each other. Dis-
cover the product details to find the most suit-
able cutting tool.
>> Media available in different languages
54 55THE PICTOGRAM LEGEND. Our new pictogram system helps you to find the optimal product.These little symbols inform you
ALL MARTOR PICTOGRAMS AT A GLANCE. about the safety level, the main cutting materials or the condition of the handle, for example.
TECHNICAL FEATURES MAIN CUTTING MATERIALS
Safety technology Cardboard: Cardboard: Cardboard: Cardboard:
1-ply up to 2-ply up to 3-ply up to 4-ply
Maximum safety Very high safety High safety Basic safety
Wrapping, stretch, Tape Plastic strapping Bagged goods
and shrink foil band
Layers of foil Slabbing material Envelope Foam, polystyrene
All handle details or paper off a roll
Metal detectable Very abrasion resistant Abrasion resistant Full metal housing
Rubber PVC Carpet Textile, material
Very ergonomic Ergonomic Safety lock Soft-grip
Fleece Felt Leather Velcro
For right and For right hander For left hander Lanyard hole
left hander Yarn, cord Coated film Laminated film Glass interlayer
Clip Heavy-duty Precision cutting Foldable for storage
Dispensing nozzle Safety belt Balsa wood Plastic burr
Protection cap Anti-slip Adjustable handle length Diameter and
form of grip Rubber burr Metal burr Self-adhesive Ceramic glass
label cooker top
Aceton resistant Heat resistant Printable for promotional
purposes
SERVICE
Consulting service
All blade details
Safer blade change Blade change Tool-less Disposable knife
(with magnet) with tool blade change
ACCESSORIES
2-times usable 4-times usable Spare blades in Cutting depth
blade blade knife body SAFEBOX USED BLADE CONTAINER WALL MOUNT BRACKET BELT HOLSTER
USED BLADE CONTAINER WITH CLIP
Adjustable Scraper width Tape splitter Blade retractable
cutting depth HOLSTER LARGE CUTTING MAT
Rotatable blade Adaptable blade stainless TiN coated
positioner
Acid-resistant Ceramic Rounded tip Rounded tip
hooked blade industrial blade
Rounded tip Rounded tip 1-sided 2-sided
graphic blade trapeze blade ground-edge ground-edge
Wide ground-edge
56 57You can also read
