COVID-19 Pandemic Response, Laboratory Data Reporting: CARES Act - HHS.gov
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
COVID-19 Pandemic Response, Laboratory Data Reporting: CARES Act Section 18115 January 8, 2021 Assuring a rapid and thorough public health response to the COVID-19 pandemic necessitates complete and comprehensive laboratory testing data, including standardized test results, relevant demographic details, and additional information that can improve both the public health response to SARS-CoV-2 and COVID-19. These data contribute to understanding disease incidence and trends: initiating epidemiologic case investigations, assisting with contact tracing, assessing availability and use of testing resources, and identifying supply chain issues for reagents and other material. Laboratory testing data, in conjunction with case reports and other data, also provide vital guidance for mitigation and control activities. As the country begins to reopen its doors, access to clear and accurate data is essential to communities and leadership as they use data to make decisions for a phased reopening. For individuals, access to personal test results improves feelings of safety, security, and awareness, and empowers them to take action, if necessary, to protect themselves, their families, and their communities. Public Law 116-136, § 18115(a), the Coronavirus Aid, Relief, and Economic Security (CARES) Act, requires “every laboratory that performs or analyzes a test that is intended to detect SARS- CoV-2 or to diagnose a possible case of COVID-19” to report the results from each such test to the Secretary of the Department of Health and Human Services (HHS). In addition, the statute authorizes the Secretary to prescribe the form and manner, and timing and frequency, of such reporting. This document outlines the requirements for data submission to HHS as authorized under this law. In an effort to receive these data in the most efficient and effective manner, the Secretary is requiring that all data be reported through existing public health data reporting methods, described below. As a guiding principle, data should be sent to state or local public health departments using existing reporting channels (in accordance with state law or policies) to ensure rapid initiation of case investigations by those departments, concurrent to laboratory results being shared with an ordering provider, or patient as applicable. Entities Required to Report All laboratories—including laboratories, testing locations operating as temporary overflow or remote locations for a laboratory, and other facilities or locations performing testing at point of
care or with at-home specimen collection related to SARS-CoV-21—shall report data for all
testing completed, for each individual tested, within 24 hours of results being known or
determined, on a daily basis to the appropriate state or local public health department based on
the individual’s residence.
Methods for Submission
The required data elements related to Laboratory Data Reporting to HHS may be reported
through the following avenues:
1. Submission of laboratory testing data directly to state or local public health departments,
as required by state and/or local law or policy. These entities will then submit de-
identified data to the CDC on a daily basis using either Health Level 7 (HL7) messaging
or the CDC-provided CSV format.
2. Submission of laboratory testing data to state and local public health departments through
a centralized platform (such as the Association of Public Health Laboratories’ AIMS
platform) where such data will then be routed to the appropriate state and local authorities
and routed to CDC after removal of elements to achieve de-identification according to
applicable rules and regulations.
3. Submission of laboratory testing data through a state or regional Health Information
Exchange (HIE) to the appropriate state or local public health department and to the CDC
as directed by the state.
4. CMS-certified long-term care facilities may submit point-of-care SARS-CoV-2 testing
data, including antigen testing data, to CDC’s National Healthcare Safety Network
(NHSN). This CDC- and CMS-preferred pathway to submit data to CDC’s NHSN
applies only to CMS-certified long-term care facilities. Test data submitted to NHSN will
be reported to appropriate state and local health departments using standard electronic
laboratory messages. Other types of LTC facilities may also report testing data in NHSN
for self-tracking or to fulfill state or local reporting requirements, if any.
Required Data Elements
The following data elements must be collected and reported for SARS-CoV-2 laboratory tests,
for the transmission of complete laboratory testing data to the CDC or the Secretary’s designee.
(Note: additional data elements may be requested at a future date.)
1. Test ordered – use harmonized LOINC codes provided by CDC
2. Device Identifier
1 The CARES Act authorizes the Secretary to prescribe the laboratories which must submit the required
reports. This definition of laboratories is consistent with Clinical Laboratory Improvement Amendments
(CLIA), under which a laboratory is defined as a facility that performs applicable testing on materialsderived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of any disease or impairment of, or assessment of the health of, human beings. The CLIA regulations provide that “facilities only collecting or preparing specimens (or both) or only serving as a mailing service and not performing testing are not considered laboratories.” However, facilities collecting specimens may be directed by laboratories to provide the information required to be reported by the laboratories.
3. Test result – use appropriate LOINC and SNOMED codes, as defined by the Laboratory
In Vitro Diagnostics (LIVD) Test Code Mapping for SARS-CoV-2 Tests provided by
CDC
4. Test Result date (date format)
5. Accession #/Specimen ID
6. Patient age
7. Patient race
8. Patient ethnicity
9. Patient sex
10. Patient residence zip code
11. Patient residence county
12. Ordering provider name and NPI (as applicable)
13. Ordering provider zip
14. Performing facility name and/or CLIA number, if known
15. Performing facility zip code
16. Specimen Source - use appropriate LOINC, SNOMED-CT, or SPM4 codes, or
equivalently detailed alternative codes
17. Date test ordered (date format)
18. Date specimen collected (date format)
The following additional demographic data elements should also be collected and reported to
state or local public health departments but these data will not be collected by CDC or the
Secretary’s designee. State and local privacy standards apply to the collection of these data elements.
(Note: additional data elements may be requested by state, local or federal health departments at
any time.)
1. Patient name (Last name, First name, Middle Initial)
2. Patient street address
3. Patient phone number with area code
4. Patient date of birth
5. Ordering provider address
6. Ordering provider phone number
In order to meet this requirement, any person or entity ordering a diagnostic or serologic test,
collecting a specimen, or performing a test should make every reasonable effort to collect
complete demographic information and should include such data when ordering a laboratory test
to enable the entities performing the test to report these data to state and local public health
departments. When information is not available, ordering health care providers (or their
designees), laboratories performing SARS-CoV-2 and associated tests, and State Public Health
departments should consider leveraging resources like state or regional HIEs and National HealthInformation Networks (HIN) to obtain missing, required information. These exchanges and
networks have significant capacity to identify missing information as they typically work with a
wide range of health care provider EHR generated data, as well as a broader array of ADT
(admit, discharge, transfer) feeds from local or regional stakeholders.
The following data fields are specific to SARS-CoV-2 and considered “ask on order entry”
(AOE) questions for traditional Electronic Health Records or Laboratory Information
Management Systems. These elements should be collected and be conformant with the HL7
Version 2.5.1 Lab Order Interface Implementation Guide and associated standards, and
comprehensive of the above data fields.
1. First test (Y/N/U)
2. Employed in healthcare? Y/N/U
3. Symptomatic as defined by CDC? Y/N/U; if yes, then Date of Symptom Onset mm/dd/yy
4. Hospitalized? Y/N/U
5. ICU? Y/N/U
6. Resident in a congregate care setting (including nursing homes, residential care for
people with intellectual and developmental disabilities, psychiatric treatment facilities,
group homes, board and care homes, homeless shelter, foster care or other setting):
(Y/N/U)
7. Pregnant? Y/N/U
Data Reporting and Transmission Requirements
Recognizing that the data elements requested go above and beyond what has been historically
requested, this information should be made available in all reporting (including through methods
using existing technical infrastructure such as an HIE) to state and local public health
departments and subsequently the CDC as soon as possible, but no later than August 1, 2020.
When possible, all information should be collected using health information technology certified
to the ONC 2015 Edition certification criteria, and all information should be structured in
accordance with the US Core Data for Interoperability (USCDI) when available or when
possible. All data transmission should occur electronically using Health Level 7 (HL7)
electronic laboratory reporting (ELR) implementation guides when possible but a predefined flat
file format may also be acceptable. In addition, clinical/point of care testing facilities using
electronic health records (EHRs) are encouraged to use electronic case reporting (eCR) standards
to report laboratory testing data, at the receiver’s discretion, provided the above data elements
and timeliness requirements can be met.
For home-based collection of samples that are sent to a laboratory for testing, the laboratory must
be able to collect the required information for reporting, so the process for sample collection
should include submission of the data elements above (along with the specimen) to the lab
performing the test, which will then report to the state and/or local public health department andsubsequently HHS or entity designated by the Secretary. For point of care testing, the laboratory
(including a facility or setting with a certificate of waiver) must ensure the test is set up and
operational to deliver timely and complete electronic results (with identifiers) as per the methods
of submission.
Tests that are performed entirely in the home with test results delivered on the testing device
within the home are being developed and may be authorized in the future. Developers of such
tests are encouraged to consider ways in which the data elements and information described
above could be collected and reported given its critical importance to public health efforts. This
might be accomplished through applications on a personal smartphone or tablet, a patient portal,
direct transmission from the test platform itself, or other innovative technologies.
Links to the relevant applicable standards are available here:
https://loinc.org/sars-coronavirus-2/
https://confluence.ihtsdotools.org/display/snomed/SNOMED%2BCT%2BCOVID-
19%2BRelated%2BContent
https://www.cdc.gov/csels/dls/sars-cov-2-livd-codes.html
https://phinvads.cdc.gov/vads/SearchVocab.action
https://www.healthit.gov/test-method/transmission-public-health-agencies-reportable-
laboratory-tests-and-valueresults#ccg
http://www.hl7.org/implement/standards/product_brief.cfm?product_id=98
https://hl7v2-elr-testing.nist.gov/mu-elr/#
https://www.healthit.gov/isa/covid-19
Additional Resources provided by CDC and FDA:
Test developers with questions about coding can send questions to:
SHIELD-LabCodes@fda.hhs.gov.
Test users (e.g., laboratories/healthcare providers) can send questions to: dlsinquiries@cdc.gov.
Laboratory Data Reporting and Electronic Health Records
Laboratory data serves not only as important information to support decision making related to
the public health emergency, but also as a critical piece to better understanding the performance
of tests in real-world conditions, the effectiveness of clinical interventions, and patient outcomes
and interventions. Better understanding the characteristics and performance of tests can help
ensure that healthcare providers are equipped with the maximum information necessary to make
clinical decisions, develop recommendations, and provide the most appropriate care for their
patients. Additionally, with widespread use of electronic health records (EHR), incorporating
information related to laboratory testing can ensure completeness for future clinical research ontreatments, outcomes, quality and performance of diagnostic tests, and our clinical understanding
of COVID-19.
To ensure that data can be captured in the electronic health record (EHR), HHS also
recommends, but does not require, that the transmission of laboratory results back to the ordering
provider (whenever possible) include the following information.
1. Test result – use appropriate LOINC and SNOMED codes, as defined by the Laboratory
In Vitro Diagnostics (LIVD) Test Code Mapping for SARS-CoV-2 Tests provided by
CDC
2. Test result date (date format)
3. Unique patient identifier
4. Test ordered – use appropriate LOINC codes
5. Device Identifier
6. Accession #/Specimen ID
These data fields represent the minimum information and any data transmission should be in
accordance with the HL7 Lab Results Interface (LRI) implementation guide and standard. To
ensure that patients receive timely and critical information regarding their own health condition
and status, HHS also recommends, but does not require, the transmission of laboratory results be
sent directly to the patient (or parent/guardian), either by mail (in writing), email (electronically),
and/or via a patient portal or secure standard-based application programming interface
(electronically), using commonly available standards such as FHIR (for instance, the Argonaut
Data Query Implementation Guide.)
LOINC and SNOMED-CT codes, as defined by the Laboratory In Vitro Diagnostics (LIVD)
Test Code Mapping for SARS-CoV-2 Tests provided by CDC, should be used when possible to
help ensure normalization and harmonization of data elements related to laboratory test and
results.
Laboratories that meet the definition of a covered entity under the Health Insurance Portability
and Accountability Act of 1996 (HIPAA) regulations are permitted to disclose this protected
health information (i.e., laboratory results and other data elements described above) as provided
in this guidance under the HIPAA Privacy Rule. A laboratory’s business associate also is
permitted to disclose this protected health information if their business associate agreement
allows the disclosure, or if the disclosure is pursuant to OCR’s Notification of Enforcement
Discretion for Business Associates. Nothing in this guidance changes the existing requirements
for HIPAA covered entities and business associates to comply with the applicable HIPAA
Privacy, Security, and Breach Notification Rules.You can also read
