Temperature scanners and personal safety equipment - For a safe company in the times of Coronavirus
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Temperature scanners
and personal safety equipment
For a safe company in the times of Coronavirus
2020 EN
Personal safety equipment
Protect your company efficiently
against COVID-19
During a wave of infections, many people are infected without knowing it.
Protect your company and your employees from viruses such as COVID-19
and thereby secure your production and operational processes. With the
provision of personal safety equipment for employees and body temperature
measurements at the entry points, you increase employee safety and minimize
the risk of production downtimes.
» The greatest possible protection of employees and production
» The risk of a total loss of production is significantly minimized
» Possible requirements imposed by the authorities were implemented as
soon as they came into force
» No delays in the production chain
Face masks KN95 Simple face masks Disinfectant
» Ensuring operation, even if the crisis condition lasts longer REF: 101770 REF: 101771 REF: 101779 (9x1 liter)
» Export ban for safety equipment to Europe has now been lifted again REF: 101780 (5 liters)
Unit of 1,000 pieces Unit of 2,000 pieces
The masks KN-95 are manufactu- Even a basic mask has the The ethanol-based disinfectant
Table of Contents red strictly according to GB2626- potential to reduce viruses in is based on the WHO recipe for
2006 (corresponds to FFP2 1). the air. With simple masks, fewer disinfectants and is effective
Page 3 Personal safety equipment GB2626-2006 is an industry stan- coronaviruses can be detected against a large number of
dard and means that the mask in aerosols and microdroplets in bacteria and enveloped viruses
Page 4 Temperature scanners contains over 95 percent of the the air we breathe. 2 including the coronavirus (Sars-
particles with an average mass CoV-2).
Page 6 Temperature scanner Plus diameter of 0.3 Filters microme-
ters.
Page 8 Access control
1
Source: https://www.din.de/resource/blob/709926/90f68f9e40ad379606ad389abd9d5e55/pruefnormenvergleich-filterschutzmasken-
Page 2 ffp2-mit-chinesischer-norm-gb-2626-2006-kn95-berliner-feuerwehr-data.pdf
2
Source: https://www.nature.com/articles/s41591-020-0843-2#Abs1
Temperature scanner Persönliche Sicherheitsausrüstung
Hand-held temperature scanner - REF: 101774 Sensor temperature scanner - REF: 101775
Regarding fever, 80% of people have a more intense One of the main symptoms of a viral infection is unusual body temperature. The normal
temperature diffusion in the facial area on the far right or body temperature is between 36.5°C and 37°C, and if it exceeds 37.3°C, it is a real
left of the forehead between the hairline and eyebrow. With pathological fever.
the hand-held temperature scanner, you can carry out a Biometric AI technology uses an infrared sensor to measure and record a person‘s body
contactless control at a distance. temperature in real-time based on facial feature information. The system also uses a
multi-tasking facial recognition algorithm to align the infrared sensor to the optimal
» Precise non-contact measurements measurement position.
» Selectable body or object temperature measurement
» ºC or ºF user selectable » Fast temperature detection thanks to the contactless measurement of body surface
» Alarm value adjustable temperature within 1 second
» Automatic storage of the last 32 measurements » Optimal distance of 0.3 - 0.5 meters for measurement
» Display resolution in 0.1ºC (0.1ºF) steps » Voice alarm for measurements at elevated temperatures
» LCD display with backlight » Ambient temperature from -20 ° C ~ 65 ° C
» Image storage for 3,000 faces, 1 million data records (can be deactivated)
Product data » Facial recognition within 0.2 seconds
Body temperature measuring range 34 °C to 42.9 °C (94 °F to 109 °F) » Offline use possible
» Facial recognition possible with a mouth mask
Test distance 1 - 5 cm
» Different languages can be selected
Temperature measurement speed Less than 1 second
Temperature measurement accuracy ± 0,2 °
Product data
Mode Switchable mode for body / object
temperature measurement Display 5“ touch display
Switch off Automatic switch-off function Display resolution 854 * 480 pixels
Battery operation 2x AA 1.5V batteries Temperature measurement accuracy ± 0.3 - 0.5 °C
Voltage DC 3V Temperature measurement speed Less than 1 second
Power consumption 3mW Temperature measurement range -40 ~ 85 °C
Memory Up to 32 measurements can Temperature measuring distance 0.3 - 0.5 m
be saved Working temperature -20 ~ 65 °C
Weight 0.15 kg
Page 4
Temperature scanner plus
Walk through temperature scanner
REF: 101773 » Control panel display function: Automatic counting
of people walking through, alarms and temperature
Contactless infrared temperature measurement of the human body measurements.
using an integrated IR sensor.
Visual feedback » Self-test function when switching on. A Continuity
The scanner automatically measures the body temperature of a
indicator temperature sensor is started, the system
passing person using infrared measurement technology. Thanks to
the fast measurement, the scanner is suitable for frequented places automatically detects and diagnoses the main control
such as train stations, schools, and factories. system, the infrared device system, external devices,
and connections. Plug and play for ease of use.
» The continuity temperature sensor is harmless for
Product data pacemakers, pregnant women, films, videotapes, etc.
High speed
External dimensions 2200mm x 800mm x 580mm (HxLxW) temperature sensor » Easy installation: the system is a standalone design
Clearance dimensions 2010mm x 700mm x 500mm (HxLxW) that can be installed or removed in just 10 minutes.
Weight 60 kg
Test sensitivity Adjustable between 0 and 99
Test distance 30 cm
Temperature accuracy ± 0.3-0.5 °C
Temperature measurement Less than 1 second
speed
Operating temperature 10 °C ~ 45 °C
Page 6
Access control 1
2
3 (I
UT570-F Bridge Swing Turnstile
4 uN1�
By restricting the maximum number of people 5
allowed in shops and public buildings, the
minimum distances are supported. The passage
control counts the number of visitors for each pass
6 in
6
access cont
and prevents further visitors from entering as soon
as the maximum limit is reached. When another 2 out
visitorexits the building through the passage 1/.'
counter, the entrance opens automatically for a manual c
new visitor.
» Counting function The device integrated machinery, electronics, microprocessor control and a variety of identity recognition techno
Compatible with IC card, ID card, bar code card, fingerprints and other identification equipments.
» Automatic shut-off function when the
maximum visitor limit is reached
» Standalone design and therefore easy to
integrate into existing processes
Access control “turnstile” Access control “lock”
CROSSING CAPACITY PASSAGE WIDTH ANTI BUFFERING FUNCTION ANTI-TAILING FUNCTION 81-DIRECTIONAL MOTORIZED CAN BE C
» Compatible with a variety of identification REF: 101777 REF: 101778
Parameters:
extensions for IC cards, ID cards, barcodes,
fingerprints and much more Product data Product data 1. Shell processing technology: using laser, b
cutting, welding, polishing, polishing and othe
1
» All products are CE approved External dimensions Ø 168 mm * 1050 mm External dimensions processes.
1400 * 200 * 980 mm
2. Adaptation temperature: -40 °C ~ 80 °C. (N
Passage dimensions 1200 mm Passage dimensions 1200 mm3. Operating environment lndoor/outdoor (Sh
add temperature control system).
Material Stainless steel (AISI 304) Material Stainless steel (AISI 304)
Our Advantages
Maximum speed 35-40 people / minute Maximum speed 35-40 people / minute
♦ Experience factory , all size ,thickness and
Flow direction Adjustable Flow direction Adjustableappearance can be customized . OEM &O
requirments are accepted.
Humidity 5% - 90% Humidity 5% - 90%♦ Can be connected with Access control sys
,Security Checking system . And be able to
system integration solutions.
♦ Strict production process and quality contr
of our products quality .
2
www.umqs
Page 8
FAQs
Are fever measurements allowed before entering the Why should a fever be measured when
company premises? What is to be considered? starting work?
• Many experts see the measure as justified Nearly all patients have fever symptoms during the course of the COVID-19
• Personal data must never be saved disease. Therefore, body temperature measurement is the most reliable and easiest
• Identification of the employee must be prevented measure to implement for identifying infected employees as well as to avoid further
• Data collection must be documented in accordance with the GDPR infections.
• A short company agreement should be concluded 0 10 20 30 40 50 60 70 80 90 100 %
• There is no complete legal certainty (judgments are missing)
Elevated temperature >95%
Source: https://www.arbrb.de/blog/2020/03/20/corona-duerfen-arbeitgeber-fieber-messen/
cough (rather dry) >75%
fatigue 40-70%
mucus/phlegm 20-25%
body ache 10-35%
Do simple face masks hold back headache / confusion ~10%
sore throat ~10%
coronaviruses? nasal symptoms ~5%
Coronaviruses spread between people through direct or diarrhea 5-10%
indirect contact, breath droplets, and fine-particle aerosols. nausea 5-10%
Laboratory tests show that face masks can help prevent the vomiting ~5%
transmission of human coronaviruses and influenza viruses
hemoptysis occasional
from symptomatic people.
chest pain occasional
Quelle: https://www.nature.com/articles/s41591-020-0843-2
Source: https://link.springer.com/content/pdf/10.1007/s00101-020-00758-x.pdf
Page 10 ATTENTION: The information provided is a summary of publicly available and non-legally binding information. ATTENTION: The information provided is a summary of publicly available and non-legally binding information.
The implementation of all measures is the responsibility of the respective company. The implementation of all measures is the responsibility of the respective company.
We donate! Would you like to donate?
Customer master data
When you order we do good things together! Billing address:
Company: You also have the opportunity to donate!
Street: House No.:
ZIP, City: Country:
With every order of 25 units, VisiConsult Tax ID: Branch:
Customer master data
In addition to your order, you
Optional: Your UPS, DHL, FedEx or TNT No.
donates: a package of 2000 basic face masks have the option of making
Billing address:
Company:
for shipping from Germany (at EXW): Street:
ZIP, City:
House No.:
Country:
Tax ID: Branch:
and a hand-held temperature scanner to a a donation by marking the
Optional: Your UPS, DHL, FedEx or TNT No.
for shipping from Germany (at EXW):
Delivery address: (if different) Delivery address: (if different)
Company:
Company:
non-profit organization! * designated column. The
Street: House No.:
ZIP, City: Country:
Tax ID: Branch:
Street: House No.:
Contact details
ZIP, City: Country:
donated units go to a non-profit
Contact Person:
Phone number:
Email address:
Tax ID: Branch:
Order data
organization that we select.
Your
Art. No. Products 1 SU Cost Qty. Delivery time
Donation
101776 Samples 101770 + 101771 5+5 pcs.
Contact details
101770 Face masks KN-95 1000 pcs. ca. 8-14 days
101771 Simple face masks 2000 pcs. ca. 8-14 days
101773 Walk through temperature sca 1 pc. ca. 14-21 days
101774 Hand-held temperature scanne 1 pc. ca. 14-21 days
101775 Sensor temperature scanner 1 pc. ca. 14-21 days
Contact Person: Shipping (DAP)
Installation
1 pc.
1 pc.
Phone number: - The delivery is EXW. Please provide us with the data of your service provider
- Shipping is from EXW Stockelsdorf, Germany.
- Payment must be made 14 days after delivery of the invoice.
Email address:
- The temperature scanners include a warranty period of 12 months.
- The on-site installation is not included and can be purchased optionally. You can get the price on request
- We reserve the right to confirm the order only after a price, inventory and procurement check.
- All prices excluding sales tax and VAT
- Orders can be made informally without signature using this form by email
Order data
Just ask again shortly before ordering for the current delivery time. In the current situation, we strive for the fastest
possible procurement and delivery. External influences such as customs can unfortunately affect the delivery time
unexpectedly.
We hereby order the products entered above under order quantity.
Your
Place, Date Name, Position
Art. No. Products
VisiConsult X-ray Systems & Dipl.-Ing. Hajo Schulenburg
1 SU
Phone: +49 451 480 634 - 83 Tax Reg. No.: 20/296/54344
Cost
Bank: Sparkasse zu Lübeck
Qty. Delivery time
Donation
Solutions GmbH Brandenbrooker Weg 2-4 Fax: +49 451 290 286 - 22 VAT ID: DE184536494 BIC/SWIFT: NOLADE21SPL
Local District Court Lübeck HRB 4112 23617 Stockelsdorf health@visiconsult.de EORI No.: DE4982061 IBAN: DE42 2305 0101 0012 2561 86
Place of residence: Stockelsdorf Germany www.visiconsult.com
101776 Samples 101770 + 101771 5+5 pcs.
101770 Face masks KN-95 1000 pcs. ca. 8-14 days
101771 Simple face masks 2000 pcs. ca. 8-14 days
101773 Walk through temperature sca 1 pc. ca. 14-21 days
101774 Hand-held temperature scanne 1 pc. ca. 14-21 days
101775 Sensor temperature scanner 1 pc. ca. 14-21 days
Shipping (DAP) 1 pc.
Page 12 * All items can be combined, excluding product samples and the hand-held temperature scanner. Installation 1 pc.
- The delivery is EXW. Please provide us with the data of your service provider
- Shipping is from EXW Stockelsdorf, Germany.
Before putting on a mask, clean
hands with alcohol-based hand
rub or soap and water.
To remove the mask: remove it from
behind (do not touch the front of Cover mouth and nose with mask
mask); discard immediately in a
closed bin; clean hands with alcohol-
The correct use of and make sure there are no gaps
between your face and the mask.
based hand rub or soap and water. medical masks
Replace the mask with a new one Avoid touching the mask while
as soon as it is damp and do not using it; if you do, clean your
re-use single-use masks. hands with alcohol-based hand
rub or soap and water.
Order by contacting us at
health@visiconsult.de
or by phone at
+49 451 480 634 83
Germany
VisiConsult X-ray Systems & Solutions GmbH
Brandenbrooker Weg 2-4
D-23617 Stockelsdorf
You can also read
